54ACxxxx, 54ACTxxxx. Rad-hard advanced high-speed 5 V CMOS logic series. Features. Description
|
|
|
- Brice Mathews
- 6 years ago
- Views:
Transcription
1 54ACxxxx, 54ACTxxxx Rad-hard advanced high-speed 5 V CMOS logic series Features Data brief Flat-14 Flat-16 DIL-14 DIL-16 AC: 2 to 6 V operating voltage ACT: 4.5 to 5.5 V operating voltage High speed T PD = 4.5 ns (typ.) Low DC power dissipation: 8 µa max. Symmetrical 24 ma output characteristics High noise immunity: 28 % of min. V CC Balanced propagation delays Improved electrical latch-up immunity Controlled rise and fall times Operating temperature: - 55 to 150 C Hermetic packages Rad-hard: 300 krad TID at any Mil1019 dose rates SEL immune to 110 MeV/cm²/mg LET ions RHA QML-V qualified Same die and electrical specification for engineering and flight models Flat-20 Flat-48 DIL-20 The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the package. Description The 54AC and 54ACT series represent over 60 product types with different high-speed CMOS functions, specifically designed to meet the radiation requirements of the aerospace industry. They include a large set of gates, flip-flops, multiplexers, counters, bus interfaces, and several other functions. Their radiation hardness, immunity from single event latch-up (SEL) and single event upset (SEU), and housing in hermetic packages make them suitable for the most difficult environmental conditions. The complete specification for each type is available from the DSCC web site: STMicroelectronics guarantees full compliance of qualified parts with these DSCC specifications. January 2017 DocID17352 Rev 6 1/30 For further information contact your local STMicroelectronics sales office.
2 Contents 54ACxxxx, 54ACTxxxx Contents 1 54AC and 54ACT series overview Input and output equivalent circuit diagram Maximum rating Absolute maximum ratings AC series ACT series Recommended operating conditions AC series ACT series Package information Ceramic Flat-14 package information Ceramic DIL-14 package information Ceramic Flat-16 package information Ceramic DIL-16 package information Ceramic Flat-20 package information Ceramic DIL-20 package information Ceramic Flat-48 package information Ordering information Other information Date code Documentation Revision history /30 DocID17352 Rev 6
3 54ACxxxx, 54ACTxxxx List of tables List of tables Table 1. Device summary Table 2. Absolute maximum ratings - 54AC series Table 3. Absolute maximum ratings - 54ACT series Table 4. Recommended operating conditions for 54AC series Table 5. Recommended operating conditions for 54ACT series Table 6. Ceramic Flat-14 mechanical data Table 7. Ceramic DIL-14 mechanical data Table 8. Ceramic Flat-16 mechanical data Table 9. Ceramic DIL-16 mechanical data Table 10. Ceramic Flat-20 mechanical data Table 11. Ceramic DIL-20 mechanical data Table 12. Ceramic Flat-48 mechanical data Table 13. Ordering information Table 14. Documentation provided for QML-V flight Table 15. Document revision history DocID17352 Rev 6 3/30 3
4 List of figures 54ACxxxx, 54ACTxxxx List of figures Figure 1. Input and output equivalent circuit diagram Figure 2. Ceramic Flat-14 package outline Figure 3. Ceramic DIL-14 package outline Figure 4. Ceramic Flat-16 package outline Figure 5. Ceramic DIL-16 package outline Figure 6. Ceramic Flat-20 package outline Figure 7. Ceramic DIL-20 package outline Figure 8. Ceramic Flat-48 package outline /30 DocID17352 Rev 6
5 DocID17352 Rev 6 5/ AC and 54ACT series overview Part number 54AC00 Description Rad-hard quad 2-input NAND gate Table 1. Device summary Radiation level SMD / Agency qualification EPPL detailed specification Package Y 5962F87549 Flat-14 - DIL-14 54ACT00 Rad-hard quad 2-input NAND gate Y 5962F87699 Flat-14 - DIL-14 54AC02 Rad-hard quad 2-input NOR gate Y 5962F87612 Flat-14 - DIL-14 54ACT02 Rad-hard quad 2-input NOR gate F89791 Flat-14 - DIL-14 54AC04 Rad-hard hex inverter Y 5962F87609 Flat-14 - DIL-14 54ACT04 Rad-hard hex inverter F89734 Flat-14 - DIL-14 54AC08 Rad-hard quad 2-input AND gate Y 5962F87615 Flat-14 - DIL-14 54ACT08 Rad-hard quad 2-input AND gate F89547 Flat-14 - DIL-14 54AC10 Rad-hard triple 3-input NAND gate Y 5962F87610 Flat-14 - DIL-14 54ACT10 Rad-hard triple 3-input NAND gate 300 krad F92182 Flat-14 - DIL-14 QML-V 54AC11 Rad-hard triple 3-input AND gate (Si) Y 5962F87611 Flat-14 - DIL-14 54ACT11 Rad-hard triple 3-input AND gate F90772 Flat-14 - DIL-14 54AC14 Rad-hard hex Schmitt inverter Y 5962F87624 Flat-14 - DIL-14 54AC14A Rad-hard hex Schmitt inverter low power F87624 Flat-14 - DIL-14 54ACT14 Rad-hard hex Schmitt inverter F96813 Flat-14 - DIL-14 54AC32 Rad-hard quad 2-input OR gate F87614 Flat-14 - DIL-14 54ACT32 Rad-hard quad 2-input OR gate F89736 Flat-14 - DIL-14 54AC74 Rad-hard dual D-type flip-flop with preset and clear Y 5962F88520 Flat-14 - DIL-14 54ACT74 Rad-hard dual D-type flip-flop with preset and clear F87525 Flat-14 - DIL-14 54AC86 Rad-hard quad exclusive OR F89550 Flat-14 - DIL-14 Other features - 54ACxxxx, 54ACTxxxx 54AC and 54ACT series overview
6 6/30 DocID17352 Rev 6 Part number 54ACT86 Description Rad-hard quad exclusive OR Table 1. Device summary (continued) Radiation level SMD / Agency qualification EPPL detailed specification Package Y 5962F90687 Flat-14 - DIL-14 54AC138 Rad-hard 3 to 8 line decoder inverter Y 5962F87622 Flat-16 - DIL-16 54ACT138 Rad-hard 3 to 8 line decoder inverter F87554 Flat-16 - DIL-16 54AC139 Rad-hard dual 2 to 4 line decoder/demultiplexer Y 5962F87623 Flat-16 - DIL-16 54ACT139 Rad-hard dual 2 to 4 line decoder/demultiplexer F87553 Flat-16 - DIL-16 54AC151 Rad-hard 8-channel multiplexer F87691 Flat-16 - DIL-16 54ACT151 Rad-hard 8-channel multiplexer F88756 Flat-16 - DIL-16 54AC157 Rad-hard quad 2-channel multiplexer Y 5962F89539 Flat-16 - DIL-16 54ACT157 Rad-hard quad 2-channel multiplexer F89668 Flat-16 - DIL-16 54AC161 Rad-hard synchronous binary counter with async. clear Y 5962F89561 Flat-16 - DIL-16 54ACT161 Rad-hard synchronous binary counter with async. clear F91722 Flat-16 - DIL-16 54AC174 Rad-hard hex D-type flip-flop with clear 300 krad F87626 Flat-16 - DIL-16 QML-V (Si) 54ACT174 Rad-hard hex D-type flip-flop with clear F87757 Flat-16 - DIL-16 54AC191 Rad-hard 4-bit synchronous binary up/down counter F89749 Flat-16 - DIL-16 54ACT191 Rad-hard 4-bit synchronous binary up/down counter F04228 Flat-16 - DIL-16 54AC240 Rad-hard octal bus buffer 3-state inverter Y 5962F87550 Flat-20 54ACT240 Rad-hard octal bus buffer 3-state inverter Y 5962F87759 Flat-20 54AC244 Rad-hard octal bus buffer 3-state Y 5962F87552 Flat-20 54ACT244 Rad-hard octal bus buffer 3-state Y 5962F87760 Flat-20 54AC245 Rad-hard octal bus transceiver 3-state Y 5962F87758 Flat-20 54ACT245 Rad-hard octal bus transceiver 3-state Y 5962F87663 Flat-20 54AC273 Rad-hard octal D-type flip-flop with clear Y 5962F87756 Flat-20 54ACT273 Rad-hard octal D-type flip-flop with clear F01527 Flat-20 Other features Inverted enable 54AC and 54ACT series overview 54ACxxxx, 54ACTxxxx
7 DocID17352 Rev 6 7/30 Part number 54AC373 Description Rad-hard octal D-type latch 3-state Table 1. Device summary (continued) Radiation level SMD / Agency qualification EPPL detailed specification Package Y 5962F87555 Flat-20 54ACT373 Rad-hard octal D-type latch 3-state F87556 Flat-20 54AC374 Rad-hard octal D-type flip-flop 3-state Y 5962F87694 Flat-20 54ACT374 Rad-hard octal D-type flip-flop 3-state F87631 Flat-20 54AC521 Rad-hard 8-bit comparator with enable F87695 Flat-20 54AC540 Rad-hard octal buffer/line driver 3-state F90985 Flat-20 54AC541 Rad-hard octal bus buffer 3-state Y 5962F88706 Flat-20 54ACT541 Rad-hard octal bus buffer 3-state F89795 Flat-20 54AC574 Rad-hard octal D-type flip-flop 3-state 300 krad F96773 Flat-20 54ACT574 Rad-hard octal D-type flip-flop 3-state (Si) QML-V Y 5962F89601 Flat-20 54AC2525 (1) Rad-hard 1 to 8 skew clock driver F92174 Flat-48 54AC16244 Rad-hard 16-bit bus transceiver non inverting F04210 Flat-48 54ACT16244 Rad-hard 16-bit bus transceiver non inverting F92022 Flat-48 54AC16245 Rad-hard 16-bit bus transceiver 3-inverting F04211 Flat-48 54ACT16245 Rad-hard 16-bit 3-state buffer transceiver F92023 Flat-48 54AC16373 Rad-hard 16 D-type latch 3-state F04212 Flat-48 54ACT16373 Rad-hard 16-bit 3-state D-type latch F92024 Flat-48 54AC16374 Rad-hard 16 D-type flip flop 3-state F04213 Flat-48 54ACT16374 Rad-hard 16-bit 3-state D-type flip-flop F92025 Flat-48 54AC (2) Rad-hard 16-bit 3 to 5 V level shifter transceiver 3-state 100 krad (Si) R98580 Flat-48 Other features Non inverted enable 1. The product is not yet formally qualified by DSCC. 2. This product has a dedicated datasheet. Note: Contact an ST sales office for information on other 54AC or 54ACT part numbers and products in die form and QML-Q versions 54ACxxxx, 54ACTxxxx 54AC and 54ACT series overview
8 Input and output equivalent circuit diagram 54ACxxxx, 54ACTxxxx 2 Input and output equivalent circuit diagram Figure 1. Input and output equivalent circuit diagram 8/30 DocID17352 Rev 6
9 54ACxxxx, 54ACTxxxx Maximum rating 3 Maximum rating 3.1 Absolute maximum ratings AC series Table 2. Absolute maximum ratings - 54AC series Symbol Parameter Value Unit V CC Supply voltage -0.5 to +7.0 V V I DC input voltage -0.5 to V CC V V O DC output voltage -0.5 to V CC V I IK DC input diode current ± 20 ma I OK DC output diode current ± 50 ma I O DC output current ± 50 ma I CC or I GND DC V CC or ground current from 100 to 400 ma T STG Storage temperature -65 to +150 C T L Lead temperature (10 sec) 260 C Note: All voltage values are referred to V SS pin voltage ACT series Table 3. Absolute maximum ratings - 54ACT series Symbol Parameter Value Unit V CC Supply voltage (1) -0.5 to +7.0 V V I DC input voltage -0.5 to V CC V V O DC output voltage -0.5 to V CC V I IK DC input diode current ± 20 ma I OK DC output diode current ± 50 ma I O DC output current ± 50 ma I CC or I GND DC V CC or ground current from 100 to 400 ma T STG Storage temperature -65 to +150 C T L Lead temperature (10 sec) 260 C 1. All products of the RHFACT series are specified with an absolute maximum rating of 7 V for the supply voltage, even though the SMD variant of some of them is limited to 6 V by other suppliers. Note: All voltage values are referred to V SS pin voltage. DocID17352 Rev 6 9/30 29
10 Maximum rating 54ACxxxx, 54ACTxxxx 3.2 Recommended operating conditions AC series Table 4. Recommended operating conditions for 54AC series Symbol Parameter Value Unit V CC Supply voltage 2 to 6 V V I Input voltage 0 to V CC V V O Output voltage 0 to V CC V T OP Operating temperature -55 to 150 C dt/dv Input rise and fall time (1) V CC = 3.0, 4.5 or to 8 ns/v 1. V IN from 30% to 70% of V CC ACT series Table 5. Recommended operating conditions for 54ACT series Symbol Parameter Value Unit V CC Supply voltage 4.5 to 5.5 V V I Input voltage 0 to V CC V V O Output voltage 0 to V CC V T OP Operating temperature -55 to 150 C dt/dv Input rise and fall time (1) V CC = 3.0, 4.5 or to 8 ns/v 1. V IN from 30% to 70% of V CC. 10/30 DocID17352 Rev 6
11 54ACxxxx, 54ACTxxxx Package information 4 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: ECOPACK is an ST trademark. DocID17352 Rev 6 11/30 29
12 Package information 54ACxxxx, 54ACTxxxx 4.1 Ceramic Flat-14 package information Figure 2. Ceramic Flat-14 package outline e b c L 14 8 E3 E E2 1 7 E3 L S1 Q D A _J 1. The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the package. Connecting unused pins or metal lid to ground or to the power supply will not affect the electrical characteristics. Table 6. Ceramic Flat-14 mechanical data Symbol Dimensions (mm) Dimensions (inches) Min. Typ. Max. Min. Typ. Max. A b c D E E E e L Q S /30 DocID17352 Rev 6
13 54ACxxxx, 54ACTxxxx Package information 4.2 Ceramic DIL-14 package information Figure 3. Ceramic DIL-14 package outline 1. The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the package. Connecting unused pins or metal lid to ground or to the power supply will not affect the electrical characteristics. Table 7. Ceramic DIL-14 mechanical data Symbol Dimensions (mm) Dimensions (inches) Min. Typ. Max. Min. Typ. Max. A a a B b b D E e e e F I K L DocID17352 Rev 6 13/30 29
14 Package information 54ACxxxx, 54ACTxxxx 4.3 Ceramic Flat-16 package information Figure 4. Ceramic Flat-16 package outline F G D H 16 9 A N L 1 8 H E M B C E 1. The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the package. Connecting unused pins or metal lid to ground or to the power supply will not affect the electrical characteristics. Table 8. Ceramic Flat-16 mechanical data Symbol Dimensions (mm) Dimensions (inches) Min. Typ. Max. Min. Typ. Max. A B C D E F G H L M N /30 DocID17352 Rev 6
15 54ACxxxx, 54ACTxxxx Package information 4.4 Ceramic DIL-16 package information Figure 5. Ceramic DIL-16 package outline Option pin 1 index mark Option leads shape 1. The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the package. Connecting unused pins or metal lid to ground or to the power supply will not affect the electrical characteristics. Table 9. Ceramic DIL-16 mechanical data Symbol Dimensions (mm) Dimensions (inches) Min. Typ. Max. Min. Typ. Max. A a a B b b D E e e e F I K L DocID17352 Rev 6 15/30 29
16 Package information 54ACxxxx, 54ACTxxxx 4.5 Ceramic Flat-20 package information Figure 6. Ceramic Flat-20 package outline 1. The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the package. Connecting unused pins or metal lid to ground or to the power supply will not affect the electrical characteristics. Table 10. Ceramic Flat-20 mechanical data Symbol Dimensions (mm) Dimensions (inches) Min. Typ. Max. Min. Typ. Max. A b c D E E E e L Q S /30 DocID17352 Rev 6
17 54ACxxxx, 54ACTxxxx Package information 4.6 Ceramic DIL-20 package information Figure 7. Ceramic DIL-20 package outline 1. The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the package. Connecting unused pins or metal lid to ground or to the power supply will not affect the electrical characteristics. Table 11. Ceramic DIL-20 mechanical data GAMS CB Symbol Dimensions (mm) Dimensions (inches) Min. Typ. Max. Min. Typ. Max. A a a B b b D E e e e F I K L DocID17352 Rev 6 17/30 29
18 Package information 54ACxxxx, 54ACTxxxx 4.7 Ceramic Flat-48 package information Figure 8. Ceramic Flat-48 package outline A 1. The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the package. Connecting unused pins or metal lid to ground or to the power supply will not affect the electrical characteristics. Symbol Table 12. Ceramic Flat-48 mechanical data Dimensions (mm) Dimensions (inches) Min. Typ. Max. Min. Typ. Max. A b c D E E E e f L Q S /30 DocID17352 Rev 6
19 DocID17352 Rev 6 19/30 5 Ordering information Table 13. Ordering information Order codes SMD pin Quality level Package Lead finish Marking (1) Mass (g) EPPL Packing RHFAC00K1 - Engineering model Flat-14 Gold RHFAC00K RHFAC00K01V 5962F VXC QML-V flight Flat-14 Gold 5962F VXC 0.70 Y RHFAC00K02V 5962F VXA QML-V flight Flat-14 Solder dip 5962F VXA 0.70 Y RHFAC00D03V 5962F VCC QML-V flight DIL-14 Gold 5962F VCC RHFACT00K1 - Engineering model Flat-14 Gold RHFACT00K RHFACT00K01V 5962F VXC QML-V flight Flat-14 Gold 5962F VXC 0.70 Y RHFACT00K02V 5962F VXA QML-V flight Flat-14 Solder dip 5962F VXA 0.70 Y RHFACT00D03V 5962F VCC QML-V flight DIL-14 Gold 5962F VCC RHFAC02K1 - Engineering model Flat-14 Gold RHFAC02K RHFAC02K01V 5962F VXC QML-V flight Flat-14 Gold 5962F VXC 0.70 Y RHFAC02K02V 5962F VXA QML-V flight Flat-14 Solder dip 5962F VXA 0.70 Y RHFAC02D03V 5962F VCC QML-V flight DIL-14 Gold 5962F VCC Strip pack RHFACT02K1 - Engineering model Flat-14 Gold RHFACT02K RHFACT02K01V 5962F VXC QML-V flight Flat-14 Gold 5962F VXC RHFACT02K02V 5962F VXA QML-V flight Flat-14 Solder dip 5962F VXA RHFAC04K1 - Engineering model Flat-14 Gold RHFAC04K RHFAC04K01V 5962F VXC QML-V flight Flat-14 Gold 5962F VXC 0.70 Y RHFAC04K02V 5962F VXA QML-V flight Flat-14 Solder dip 5962F VXA 0.70 Y RHFAC04D03V 5962F VCC QML-V flight DIL-14 Gold 5962F VCC RHFACT04K1 - Engineering model Flat-14 Gold RHFACT04K RHFACT04K01V 5962F VXC QML-V flight Flat-14 Gold 5962F VXC RHFACT04K02V 5962F VXA QML-V flight Flat-14 Solder dip 5962F VXA ACxxxx, 54ACTxxxx Ordering information
20 20/30 DocID17352 Rev 6 Table 13. Ordering information (continued) Order codes SMD pin Quality level Package Lead finish Marking (1) Mass (g) EPPL Packing RHFACT04D03V 5962F VCC QML-V flight DIL-14 Gold 5962F VCC RHFAC08K1 - Engineering model Flat-14 Gold RHFAC08K RHFAC08K01V 5962F VXC QML-V flight Flat-14 Gold 5962F VXC 0.70 Y RHFAC08K02V 5962F VXA QML-V flight Flat-14 Solder dip 5962F VXA 0.70 Y RHFAC08D03V 5962F VCC QML-V flight DIL-14 Gold 5962F VCC RHFACT08K1 - Engineering model Flat-14 Gold RHFACT08K RHFACT08K01V 5962F VXC QML-V flight Flat-14 Gold 5962F VXC RHFACT08K02V 5962F VXA QML-V flight Flat-14 Solder dip 5962F VXA RHFACT08D03V 5962F VCC QML-V flight DIL-14 Gold 5962F VCC RHFAC10K1 - Engineering model Flat-14 Gold RHFAC10K RHFAC10K01V 5962F VXC QML-V flight Flat-14 Gold 5962F VXC 0.70 Y RHFAC10K02V 5962F VXA QML-V flight Flat-14 Solder dip 5962F VXA 0.70 Y RHFAC10D03V 5962F VCC QML-V flight DIL-14 Gold 5962F VCC Strip pack RHFACT10K1 - Engineering model Flat-14 Gold RHFACT10K RHFACT10K01V 5962F VXC QML-V flight Flat-14 Gold 5962F VXC RHFACT10K02V 5962F VXA QML-V flight Flat-14 Solder dip 5962F VXA RHFAC11K1 - Engineering model Flat-14 Gold RHFAC11K RHFAC11K01V 5962F VXC QML-V flight Flat-14 Gold 5962F VXC 0.70 Y RHFAC11K02V 5962F VXA QML-V flight Flat-14 Solder dip 5962F VXA 0.70 Y RHFAC11D03V 5962F VCC QML-V flight DIL-14 Gold 5962F VCC RHFACT11K1 - Engineering model Flat-14 Gold RHFACT11K RHFACT11K01V 5962F VXC QML-V flight Flat-14 Gold 5962F VXC RHFACT11K02V 5962F VXA QML-V flight Flat-14 Solder dip 5962F VXA RHFAC14K1 - Engineering model Flat-14 Gold RHFAC14K RHFAC14K01V 5962F VXC QML-V flight Flat-14 Gold 5962F VXC 0.70 Y Ordering information 54ACxxxx, 54ACTxxxx
21 DocID17352 Rev 6 21/30 Table 13. Ordering information (continued) Order codes SMD pin Quality level Package Lead finish Marking (1) Mass (g) EPPL Packing RHFAC14K02V 5962F VXA QML-V flight Flat-14 Solder dip 5962F VXA 0.70 Y RHFAC14D03V 5962F VCC QML-V flight DIL-14 Gold 5962F VCC RHFAC14D04V 5962F VCA QML-V flight DIL-14 Solder dip 5962F VCA RHFAC14AK1 - Engineering model Flat-14 Gold RHFAC14AK RHFAC14AK01V 5962F VXC QML-V flight Flat-14 Gold 5962F VXC RHFAC14AK02V 5962F VXA QML-V flight Flat-14 Solder dip 5962F VXA RHFACT14K1 - Engineering model Flat-14 Gold RHFACT14K RHFACT14K01V 5962F VXC QML-V flight Flat-14 Gold 5962F VXC RHFACT14K02V 5962F VXA QML-V flight Flat-14 Solder dip 5962F VXA RHFAC32K1 - Engineering model Flat-14 Gold RHFAC32K RHFAC32K01V 5962F VXC QML-V flight Flat-14 Gold 5962F VXC 0.70 Y RHFAC32K02V 5962F VXA QML-V flight Flat-14 Solder dip 5962F VXA 0.70 Y RHFAC32D03V 5962F VCC QML-V flight DIL-14 Gold 5962F VCC Strip pack RHFACT32K1 - Engineering model Flat-14 Gold RHFACT32K RHFACT32K01V 5962F VXC QML-V flight Flat-14 Gold 5962F VXC RHFACT32K02V 5962F VXA QML-V flight Flat-14 Solder dip 5962F VXA RHFACT32D03V 5962F VCC QML-V flight DIL-14 Gold 5962F VCC RHFAC74K1 - Engineering model Flat-14 Gold RHFAC74K RHFAC74K01V 5962F VXC QML-V flight Flat-14 Gold 5962F VXC 0.70 Y RHFAC74K02V 5962F VXA QML-V flight Flat-14 Solder dip 5962F VXA 0.70 Y RHFAC74D03V 5962F VCC QML-V flight DIL-14 Gold 5962F VCC RHFACT74K1 - Engineering model Flat-14 Gold RHFACT74K RHFACT74K01V 5962F VXC QML-V flight Flat-14 Gold 5962F VXC RHFACT74K02V 5962F VXA QML-V flight Flat-14 Solder dip 5962F VXA RHFACT74D03V 5962F VCC QML-V flight DIL-14 Gold 5962F VCC ACxxxx, 54ACTxxxx Ordering information
22 22/30 DocID17352 Rev 6 Table 13. Ordering information (continued) Order codes SMD pin Quality level Package Lead finish Marking (1) Mass (g) EPPL Packing RHFAC86K1 - Engineering model Flat-14 Gold RHFAC86K RHFAC86K01V 5962F VXC QML-V flight Flat-14 Gold 5962F VXC 0.70 Y RHFAC86K02V 5962F VXA QML-V flight Flat-14 Solder dip 5962F VXA 0.70 Y RHFAC86D03V 5962F VCC QML-V flight DIL-14 Gold 5962F VCC RHFACT86K1 - Engineering model Flat-14 Gold RHFACT86K RHFACT86K01V 5962F VXC QML-V flight Flat-14 Gold 5962F VXC 0.70 Y RHFACT86K02V 5962F VXA QML-V flight Flat-14 Solder dip 5962F VXA 0.70 Y RHFAC138K1 - Engineering model Flat-16 Gold RHFAC138K RHFAC138K01V 5962F VXC QML-V flight Flat-16 Gold 5962F VXC 0.70 Y RHFAC138K02V 5962F VXA QML-V flight Flat-16 Solder dip 5962F VXA 0.70 Y RHFAC138D03V 5962F VEC QML-V flight DIL-16 Gold 5962F VEC RHFACT138K1 - Engineering model Flat-16 Gold RHFACT138K RHFACT138K01V 5962F VXC QML-V flight Flat-16 Gold 5962F VXC Strip pack RHFACT138K02V 5962F VXA QML-V flight Flat-16 Solder dip 5962F VXA RHFAC139K1 - Engineering model Flat-16 Gold RHFAC139K RHFAC139K01V 5962F VXC QML-V flight Flat-16 Gold 5962F VXC 0.70 Y RHFAC139K02V 5962F VXA QML-V flight Flat-16 Solder dip 5962F VXA 0.70 Y RHFACT139K1 - Engineering model Flat-16 Gold RHFACT139K RHFACT139K01V 5962F VXC QML-V flight Flat-16 Gold 5962F VXC RHFACT139K02V 5962F VXA QML-V flight Flat-16 Solder dip 5962F VXA RHFACT139D03V 5962F VEC QML-V flight DIL-16 Gold 5962F VEC RHFAC151K1 - Engineering model Flat-16 Gold RHFAC151K RHFAC151K01V 5962F VXC QML-V flight Flat-16 Gold 5962F VXC RHFAC151K02V 5962F VXA QML-V flight Flat-16 Solder dip 5962F VXA RHFACT151K1 - Engineering model Flat-16 Gold RHFACT151K Ordering information 54ACxxxx, 54ACTxxxx
23 DocID17352 Rev 6 23/30 Table 13. Ordering information (continued) Order codes SMD pin Quality level Package Lead finish Marking (1) Mass (g) EPPL Packing RHFACT151K01V 5962F VXC QML-V flight Flat-16 Gold 5962F VXC RHFACT151K02V 5962F VXA QML-V flight Flat-16 Solder dip 5962F VXA RHFAC157K1 - Engineering model Flat-16 Gold RHFAC157K RHFAC157K01V 5962F VXC QML-V flight Flat-16 Gold 5962F VXC 0.70 Y RHFAC157K02V 5962F VXA QML-V flight Flat-16 Solder dip 5962F VXA 0.70 Y RHFAC157D03V 5962F VEC QML-V flight DIL-16 Gold 5962F VEC RHFACT157K1 - Engineering model Flat-16 Gold RHFACT157K RHFACT157K01V 5962F VXC QML-V flight Flat-16 Gold 5962F VXC RHFACT157K02V 5962F VXA QML-V flight Flat-16 Solder dip 5962F VXA RHFACT157D03V 5962F VEC QML-V flight DIL-16 Gold 5962F VEC RHFAC161K1 - Engineering model Flat-16 Gold RHFAC161K RHFAC161K01V 5962F VXC QML-V flight Flat-16 Gold 5962F VXC 0.70 Y RHFAC161K02V 5962F VXA QML-V flight Flat-16 Solder dip 5962F VXA 0.70 Y Strip pack RHFAC161D03V 5962F VEC QML-V flight DIL-16 Gold 5962F VEC RHFACT161K1 - Engineering model Flat-16 Gold RHFACT161K RHFACT161K01V 5962F VXC QML-V flight Flat-16 Gold 5962F VXC RHFACT161K02V 5962F VXA QML-V flight Flat-16 Solder dip 5962F VXA RHFAC174K1 - Engineering model Flat-16 Gold RHFAC174K RHFAC174K01V 5962F VXC QML-V flight Flat-16 Gold 5962F VXC RHFAC174K02V 5962F VXA QML-V flight Flat-16 Solder dip 5962F VXA RHFACT174K1 - Engineering model Flat-16 Gold RHFACT174K RHFACT174K01V 5962F VXC QML-V flight Flat-16 Gold 5962F VXC RHFACT174K02V 5962F VXA QML-V flight Flat-16 Solder dip 5962F VXA RHFAC191K1 - Engineering model Flat-16 Gold RHFAC191K RHFAC191K01V 5962F VXC QML-V flight Flat-16 Gold 5962F VXC ACxxxx, 54ACTxxxx Ordering information
24 24/30 DocID17352 Rev 6 Table 13. Ordering information (continued) Order codes SMD pin Quality level Package Lead finish Marking (1) Mass (g) EPPL Packing RHFAC191K02V 5962F VXA QML-V flight Flat-16 Solder dip 5962F VXA RHFAC191D03V 5962F VEC QML-V flight DIL-16 Gold 5962F VEC RHFACT191K1 - Engineering model Flat-16 Gold RHFACT191K RHFACT191K01V 5962F VXC QML-V flight Flat-16 Gold 5962F VXC RHFACT191K02V 5962F VXA QML-V flight Flat-16 Solder dip 5962F VXA RHFAC240K1 - Engineering model Flat-20 Gold RHFAC240K RHFAC240K01V 5962F VXC QML-V flight Flat-20 Gold 5962F VXC 0.90 Y RHFAC240K02V 5962F VXA QML-V flight Flat-20 Solder dip 5962F VXA 0.90 Y RHFACT240K1 - Engineering model Flat-20 Gold RHFACT240K RHFACT240K01V 5962F VXC QML-V flight Flat-20 Gold 5962F VXC 0.90 Y RHFACT240K02V 5962F VXA QML-V flight Flat-20 Solder dip 5962F VXA 0.90 Y RHFAC244K1 - Engineering model Flat-20 Gold RHFAC244K RHFAC244K01V 5962F VXC QML-V flight Flat-20 Gold 5962F VXC 0.90 Y Strip pack RHFAC244K02V 5962F VXA QML-V flight Flat-20 Solder dip 5962F VXA 0.90 Y RHFACT244K1 - Engineering model Flat-20 Gold RHFACT244K RHFACT244K01V 5962F VXC QML-V flight Flat-20 Gold 5962F VXC 0.90 Y RHFACT244K02V 5962F VXA QML-V flight Flat-20 Solder dip 5962F VXA 0.90 Y RHFAC245K1 - Engineering model Flat-20 Gold RHFAC245K RHFAC245K01V 5962F VXC QML-V flight Flat-20 Gold 5962F VXC 0.90 Y RHFAC245K02V 5962F VXA QML-V flight Flat-20 Solder dip 5962F VXA 0.90 Y RHFACT245K1 - Engineering model Flat-20 Gold RHFACT245K RHFACT245K01V 5962F VXC QML-V flight Flat-20 Gold 5962F VXC 0.90 Y RHFACT245K02V 5962F VXA QML-V flight Flat-20 Solder dip 5962F VXA 0.90 Y RHFAC273K1 - Engineering model Flat-20 Gold RHFAC273K RHFAC273K01V 5962F VXC QML-V flight Flat-20 Gold 5962F VXC 0.90 Y Ordering information 54ACxxxx, 54ACTxxxx
25 DocID17352 Rev 6 25/30 Table 13. Ordering information (continued) Order codes SMD pin Quality level Package Lead finish Marking (1) Mass (g) EPPL Packing RHFAC273K02V 5962F VXA QML-V flight Flat-20 Solder dip 5962F VXA 0.90 Y RHFACT273K1 - Engineering model Flat-20 Gold RHFACT273K RHFACT273K01V 5962F VXC QML-V flight Flat-20 Gold 5962F VXC RHFACT273K02V 5962F VXA QML-V flight Flat-20 Solder dip 5962F VXA RHFAC373K1 - Engineering model Flat-20 Gold RHFAC373K RHFAC373K01V 5962F VXC QML-V flight Flat-20 Gold 5962F VXC 0.90 Y RHFAC373K02V 5962F VXA QML-V flight Flat-20 Solder dip 5962F VXA 0.90 Y RHFACT373K1 - Engineering model Flat-20 Gold RHFACT373K RHFACT373K01V 5962F VXC QML-V flight Flat-20 Gold 5962F VXC RHFACT373K02V 5962F VXA QML-V flight Flat-20 Solder dip 5962F VXA RHFAC374K1 - Engineering model Flat-20 Gold RHFAC374K RHFAC374K01V 5962F VXC QML-V flight Flat-20 Gold 5962F VXC 0.90 Y RHFAC374K02V 5962F VXA QML-V flight Flat-20 Solder dip 5962F VXA 0.90 Y Strip pack RHFACT374K1 - Engineering model Flat-20 Gold RHFACT374K RHFACT374K01V 5962F VXC QML-V flight Flat-20 Gold 5962F VXC RHFACT374K02V 5962F VXA QML-V flight Flat-20 Solder dip 5962F VXA RHFAC521K1 - Engineering model Flat-20 Gold RHFAC521K RHFAC521K01V - QML-V flight Flat-20 Gold RHFAC521K02V - QML-V flight Flat-20 Solder dip RHFAC540K1 - Engineering model Flat-20 Gold RHFAC540K RHFAC540K01V - QML-V flight Flat-20 Gold RHFAC540K02V - QML-V flight Flat-20 Solder dip RHFAC541K1 - Engineering model Flat-20 Gold RHFAC541K RHFAC541K01V 5962F VXC QML-V flight Flat-20 Gold 5962F VXC 0.90 Y RHFAC541K02V 5962F VXA QML-V flight Flat-20 Solder dip 5962F VXA 0.90 Y 54ACxxxx, 54ACTxxxx Ordering information
26 26/30 DocID17352 Rev 6 Table 13. Ordering information (continued) Order codes SMD pin Quality level Package Lead finish Marking (1) Mass (g) EPPL Packing RHFACT541K1 - Engineering model Flat-20 Gold RHFACT541K RHFACT541K01V 5962F VXC QML-V flight Flat-20 Gold 5962F VXC RHFACT541K02V 5962F VXA QML-V flight Flat-20 Solder dip 5962F VXA RHFAC574K1 - Engineering model Flat-20 Gold RHFAC574K RHFAC574K01V 5962F VXC QML-V flight Flat-20 Gold 5962F VXC RHFAC574K02V 5962F VXA QML-V flight Flat-20 Solder dip 5962F VXA RHFACT574K1 - Engineering model Flat-20 Gold RHFACT574K RHFACT574K01V 5962F VXC QML-V flight Flat-20 Gold 5962F VXC 0.90 Y RHFACT574K02V 5962F VXA QML-V flight Flat-20 Solder dip 5962F VXA 0.90 Y RHFAC2525K1 - Engineering model Flat-14 Gold RHFAC2525K RHFAC2525K01V 5962F VXC QML-V flight Flat-14 Gold 5962F VXC RHFAC2525K02V 5962F VXA QML-V flight Flat-14 Solder dip 5962F VXA RHFAC16244K1 - Engineering model Flat-48 Gold RHFAC16244K Strip pack RHFAC16244K01V 5962F VXC QML-V flight Flat-48 Gold 5962F VXC 1.50 Y RHFAC16244K02V 5962F VXA QML-V flight Flat-48 Solder dip 5962F VXA 1.50 Y RHFACT16244K1 - Engineering model Flat-48 Gold RHFACT16244K RHFACT16244K01V 5962F VYC QML-V flight Flat-48 Gold 5962F VYC RHFACT16244K02V 5962F VYA QML-V flight Flat-48 Solder dip 5962F VYA RHFAC16245K1 - Engineering model Flat-48 Gold RHFAC16245K RHFAC16245K01V 5962F VXC QML-V flight Flat-48 Gold 5962F VXC RHFAC16245K02V 5962F VXA QML-V flight Flat-48 Solder dip 5962F VXA RHFACT16245K1 - Engineering model Flat-48 Gold RHFACT16245K RHFACT16245K01V 5962F VYC QML-V flight Flat-48 Gold 5962F VYC RHFACT16245K02V 5962F VYA QML-V flight Flat-48 Solder dip 5962F VYA RHFAC16373K1 - Engineering model Flat-48 Gold RHFAC16373K Ordering information 54ACxxxx, 54ACTxxxx
27 DocID17352 Rev 6 27/30 Note: Table 13. Ordering information (continued) Order codes SMD pin Quality level Package Lead finish Marking (1) Mass (g) EPPL Packing RHFAC16373K01V 5962F VXC QML-V flight Flat-48 Gold 5962F VXC RHFAC16373K02V 5962F VXA QML-V flight Flat-48 Solder dip 5962F VXA RHFACT16373K1 - Engineering model Flat-48 Gold RHFACT16373K RHFACT16373K01V 5962F VYC QML-V flight Flat-48 Gold 5962F VYC RHFACT16373K02V 5962F VYA QML-V flight Flat-48 Solder dip 5962F VYA RHFAC16374K1 - Engineering model Flat-48 Gold RHFAC16374K RHFAC16374K01V 5962F VXC QML-V flight Flat-48 Gold 5962F VXC RHFAC16374K02V 5962F VXA QML-V flight Flat-48 Solder dip 5962F VXA RHFACT16374K1 - Engineering model Flat-48 Gold RHFACT16374K RHFACT16374K01V 5962F VYC QML-V flight Flat-48 Gold 5962F VYC RHFACT16374K02V 5962F VYA QML-V flight Flat-48 Solder dip 5962F VYA RHRAC164245K1 (2) - Engineering model Flat-48 Gold RHRAC164245K RHRAC164245K01V (2) 5962R VYC QML-V flight Flat-48 Gold 5962R VYC Specific marking only. Complete marking includes the following: - SMD pin (as indicated in above table) - ST logo - Date code (date the package was sealed) in YYWWA (year, week, and lot index of week) - QML logo (Q or V) - Country of origin (FR = France) 2. A dedicated datasheet exists for this order code. Strip pack Contact an ST sales office for information on other 54AC or 54ACT part numbers and products in die form and QML-Q versions. 54ACxxxx, 54ACTxxxx Ordering information
28 Other information 54ACxxxx, 54ACTxxxx 6 Other information 6.1 Date code The date code is structured as shown below: EM xyywwz QML-V yywwz where: x yy ww z 3: EM Last two digits of year Week digits Lot index in the week 6.2 Documentation Table 14. Documentation provided for QML-V flight Quality level Engineering model QML-V flight Documentation Certificate of conformance Certificate of conformance QCI (1) (groups A, B, C, D, and E) Screening electrical data Precap report PIND (2) test SEM (3) inspection report X-Ray report 1. QCI = quality conformance inspection 2. PIND = particle impact noise detection 3. SEM = scanning electron microscope 28/30 DocID17352 Rev 6
29 54ACxxxx, 54ACTxxxx Revision history 7 Revision history Table 15. Document revision history Date Revision Changes 06-Apr Aug Apr May Apr Jan Initial release. The information in this data brief was previously published in a datasheet (document ID 17145). Added Note: on page 11, Note: on page 12, Note: on page 13, Note: on page 14, Note: on page 15, Note: on page 15, Note: on page 17 and in the Pin connections diagram on the coverpage Updated drawing Flat-20 on the coverpage, added list of tables and figures, updated title of Table 4 and Table 5, reformatted Section 4: Package mechanical data and updated titles of Figure 2 to 8 and titles and headers of Table 6 to 12, updated data of Table 10 and Table 12, minor text corrections throughout document. Updated operating voltage in Features Updated Table 1: Device summary, Table 6, Table 7, Table 8, Table 9, Table 10, Table 11, Table 12, and Table 13: Ordering information. Added Section 6: Other information Updated ceramic Flat-14 package in Figure 2 and Table 6 Specified MIL-STD-1835 for Flat 14 (Table 6), DIL 14 (Table 7), Flat 16 (Table 8), DIL 16 (Table 9) and DIL 20 (Table 11) packages Removed DSCC from ceramic Flat-20 package (Figure 6 and Figure 10) Replaced ESCC with QML-V in title of Table 14 Features: removed Power-down input protection Table 1: Device summary: removed footnote 1 from 54AC521 and 54AC540, added footnote 2, and updated general note below table. Table 2: Absolute maximum ratings - 54AC series: updated value of V I parameter. Table 3: Absolute maximum ratings - 54ACT series: added footnote 1; updated values of V CC and V I parameters. Section 4: Package information: updated layout of this section and removed superfluous information. Table 13: Ordering information: updated marking of order code RHRAC164245K1, added footnote 2, and updated general note below table. Table 14: Documentation provided for QML-V flight: updated documentation information for engineering model. DocID17352 Rev 6 29/30 29
30 54ACxxxx, 54ACTxxxx IMPORTANT NOTICE PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document STMicroelectronics All rights reserved 30/30 DocID17352 Rev 6
54ACxxxx, 54ACTxxxx. Rad-hard advanced high-speed 5 V CMOS logic series. Features. Description
Rad-hard advanced high-speed 5 V CMOS logic series Features Data brief Flat-14 Flat-16 Flat-20 DIL-14 DIL-16 DIL-20 AC: 2 to 6 V operating voltage ACT: 4.5 to 5.5 V operating voltage High speed T PD =
TN1250 Technical note
Technical note Press-fit ACEPACK power modules mounting instructions Introduction ST introduces the ACEPACK Power Module family, designed for easy mounting and reliable performance in rugged applications.
LET9045C. RF power transistor from the LdmoST family of n-channel enhancement-mode lateral MOSFETs. Features. Description
RF power transistor from the LdmoST family of n-channel enhancement-mode lateral MOSFETs Features Excellent thermal stability Common source configuration P OUT (@28 V) = 45 W with 18.5 db gain @ 960 MHz
STEVAL-IHM028V2. 2 kw 3-phase motor control evaluation board featuring the STGIPS20C60 IGBT intelligent power module. Description.
2 kw 3-phase motor control evaluation board featuring the STGIPS20C60 IGBT intelligent power module Data brief Features Complete solution for a 2 kw power inverter HV supply mode: voltage 90 VAC to 285
Up to 3 W solar and USB battery charger for single-cell Li-Ion and Li-Po batteries based on the SPV1040, STBC21 and STC3100
Up to 3 W solar and USB battery charger for single-cell Li-Ion and Li-Po batteries based on the SPV1040, STBC21 and STC3100 Features Data brief Solar section Solar energy harvester with proprietary Perturb
AN5128 Application note
Application note STSPIN32F0/F0A - buck converter Enrico Poli Introduction The STSPIN32F0/F0A devices are systems in package providing a complete solution for 3-phase brushless motor driving applications.
STEVAL-ISV012V1. Up to 5 W solar battery charger for single-cell Li-ion and Li-Pol batteries based on the SPV1040 and L6924D.
Up to 5 W solar battery charger for single-cell Li-ion and Li-Pol batteries based on the SPV1040 and L6924D Data brief Features SPV1040: solar boost converter with embedded maximum power point tracking
Standard Logic ICs. Selection guide. August
Standard Logic ICs Selection guide August 2007 www.st.com/logic Family selector Family Electrical characteristics Features Packages V DD or V CC [V] V I [V] I O (typ) [ma] t PD (typ) [ns] Direct TTL interface
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. M4T28-BR12SH M4T32-BR12SH TIMEKEEPER SNAPHAT (BATTERY & CRYSTAL) FEATURES
UM0672 User manual. CRX14 and CR14 reference design PCB Gerber files. Introduction
User manual CRX14 and CR14 reference design PCB Gerber files Introduction The purpose of this user manual is to give printed-circuit board references to ease design in the case of STMicroelectronics CRX14
Is Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
XC95144 In-System Programmable CPLD. Features. Description. Power Management. December 4, 1998 (Version 4.0) 1 1* Product Specification
查询 XC95144 供应商 捷多邦, 专业 PCB 打样工厂,24 小时加急出货 1 XC95144 In-System Programmable CPLD December 4, 1998 (Version 4.0) 1 1* Product Specification Features 7.5 ns pin-to-pin logic delays on all pins f CNT to 111
XC95288 In-System Programmable CPLD
R 0 XC95288 In-System Programmable CPLD 0 5 Product Specification Features 15 ns pin-to-pin logic delays on all pins f CNT to 95 MHz 288 macrocells with 6,400 usable gates Up to 166 user pins 5V in-system
NC7SP17 TinyLogic ULP Single Buffer with Schmitt Trigger Input
NC7SP17 TinyLogic ULP Single Buffer with Schmitt Trigger Input Features 0.9 to 3.6 CC Supply Operation 3.6 Over-oltage Tolerant I/Os at CC from 0.9 to 3.6 Propagation Delay (t PD ): 4.0ns Typical for 3.0
ABS motorcycle braking chip
NXP Semiconductors Advance Information ABS motorcycle braking chip The is an antilock brake controller designed for use in harsh motorcycle environments. It has four high-current low-side drivers for use
ABS motorcycle braking chip
NXP Semiconductors Advance Information ABS motorcycle braking chip The device is an antilock brake controller designed for use in harsh motorcycle environments. It has two high-current low-side drivers
NC7SV08 TinyLogic ULP-A 2-Input AND Gate
NC7S08 TinyLogic ULP-A 2-Input AND Gate Features 0.9 to 3.6 CC Supply Operation 3.6 Over-oltage Tolerant I/Os at CC from 0.9 to 3.6 Extremely High Speed t PD - 1.0 ns: Typical for 2.7 to 3.6 CC - 1.2 ns:
Glossary of CMOS Logic IC Terms Outline
of CMOS Logic IC Terms Outline This document describes the terms used in data sheets of CMOS Logic ICs. Table of Contents Outline... 1 Table of Contents... 2 1. Absolute Maximum Ratings... 3 2. Operating
NC7SV126 TinyLogic ULP-A Buffer with Three-State Output
NC7S126 TinyLogic ULP-A Buffer with Three-State Output Features 0.9 to 3.6 CC Supply Operation 3.6 Over-oltage Tolerant I/O s at CC from 0.9 to 3.6 Extremely High Speed tpd - 1.0 ns: Typical for 2.7 to
DVFL2800S Series HIGH RELIABILITY HYBRID DC-DC CONVERTERS DESCRIPTION FEATURES
HIGH RELIABILITY HYBRID DC-DC CONVERTERS DESCRIPTION The DVFL series of high reliability DC-DC converters is operable over the full military (-55 C to +125 C) temperature range with no power derating.
LSIC1MO170E V N-channel, Enhancement-mode SiC MOSFET
LSIMOE,, mohm, TO--L LSIMOE N-channel, Enhancement-mode Si MOSFET RoHS Pb Product Summary haracteristics alue Unit DS Typical R DS(ON) mω ( T ). A ircuit Diagram TO--L Features * * Body diode Optimized
AN1011 Application note
Application note Battery technology used in NVRAM and real-time clock (RTC) products from ST Introduction Lithium Carbon MonoFlouride (LiCFx) batteries are used by STMicroelectronics in their ZEROPOWER
LSIC1MO120E V N-channel, Enhancement-mode SiC MOSFET
LSIC1MO120E0160 1200 N-channel, Enhancement-mode SiC MOSFET RoHS Pb Product Summary Characteristics alue Unit DS 1200 Typical R DS(ON) 160 mω I D ( T C 100 C) 14 A Circuit Diagram TO-247-3L Features *
ST3S01PHD BATTERY CHARGE I.C.
BATTERY CHARGE I.C. DEDICATED I.C. FOR 1 LI-ION CELL OR 3 NI-MH CELLS 5 DIFFERENT OPERATING MODES 150 ma PRECHARGE CURRENT VERY LOW DROP CHARGE SWITCH (130mV @ 800mA) VERY LOW DROP REVERSE SWITCH (130mV
LSIC1MO120E V N-channel, Enhancement-mode SiC MOSFET
LSIMO2E2, 2, 2 mohm, TO-247-3L LSIMO2E2 2 N-channel, Enhancement-mode Si MOSFET RoHS Pb Product Summary haracteristics alue Unit DS 2 Typical R DS(ON) 2 mω I D ( T ) 8 A ircuit Diagram TO-247-3L Features
MILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, BIPOLAR, ADVANCED LOW POWER SCHOTTKY TTL, NAND GATES, MONOLITHIC SILICON
INCH-POUND MIL-M-38510/370A 15 July 2004 SUPERSEDING MIL-M-38510/370(USAF) 18 March 1983 MILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, BIPOLAR, ADVANCED LOW POWER SCHOTTKY TTL, NAND GATES, MONOLITHIC
Introduction to Digital Techniques
to Digital Techniques Dan I. Porat, Ph.D. Stanford Linear Accelerator Center Stanford University, California Arpad Barna, Ph.D. Hewlett-Packard Laboratories Palo Alto, California John Wiley and Sons New
NC7SV126 TinyLogic ULP-A Buffer with Three-State Output
NC7S126 TinyLogic ULP-A Buffer with Three-State Output Features 0.9 to 3.6 CC Supply Operation 3.6 Over-oltage Tolerant I/O s at CC from 0.9 to 3.6 Extremely High Speed tpd - 1.0ns: Typical for 2.7 to
VG54123L/P EARTH LEAKAGE CURRENT DETECTOR
VG54123L/P EARTH LEAKAGE CURRENT DETECTOR Mar. 2012 VG54123L/P Earth Leakage Current Detector Ver2.2 1 INFORMATION IN THIS DOCUMENT IS INTENDED AS A REFERENCE TO ASSIST OUR CUSTOMERS IN THE SELECTION OF
SN54LS377, SN54LS378, SN54LS379, SN74LS377, SN74LS378, SN74LS379 OCTAL, HEX, AND QUAD D-TYPE FLIP-FLOPS WITH ENABLE
SN54LS377, SN54LS378, SN54LS379, SN74LS377, SN74LS378, SN74LS379 OCTAL, HEX, AND QUAD D-TYPE FLIP-FLOPS WITH ENABLE SDLS167 OCTOBER 1976 REVISED MARCH 1988 PRODUCTION DATA information is current as of
MILITARY SPECIFICATION MICROCIRCUITS, LINEAR, CMOS, ANALOG SWITCH WITH DRIVER, MONOLITHIC SILICON
INCH-POUND 4 February 2004 SUPERSEDING MIL-M-38510/116 16 April 1980 MILITARY SPECIFICATION MICROCIRCUITS, LINEAR, CMOS, ANALOG SWITCH WITH DRIVER, MONOLITHIC SILICON This specification is approved for
DS1250Y/AB 4096k Nonvolatile SRAM
19-5647; Rev 12/10 www.maxim-ic.com FEATURES 10 years minimum data retention in the absence of external power Data is automatically protected during power loss Replaces 512k x 8 volatile static RAM, EEPROM
FXLP34 Single Bit Uni-Directional Translator
FXLP34 Single Bit Uni-Directional Translator Features V to 3.6V V CC supply operation Converts any voltage (V to 3.6V) to (V to 3.6V) 4.6V tolerant inputs and outputs t PD 4ns typ. for V to 3.6V V CC 5ns
EMI INPUT FILTER 28 VOLT INPUT
FEATURES 55 to +125 C operation 28 volt input Up to 2.7 amps throughput current Up to 55 db attenuation at 500 khz Up to 60 db attenuation at 1 MHz and 5 MHz Compliant to MIL-STD-461C, CE03 Compatible
DS1250W 3.3V 4096k Nonvolatile SRAM
19-5648; Rev 12/10 3.3V 4096k Nonvolatile SRAM www.maxim-ic.com FEATURES 10 years minimum data retention in the absence of external power Data is automatically protected during power loss Replaces 512k
ACT V/1.5A Backup Battery Pack Manager FEATURES APPLICATIONS GENERAL DESCRIPTION. Rev 0, 06-Nov-13 Product Brief
0 200 400 600 800 1000 1400 1200 5.5 FEATURES Dedicated Single Chip Solution for Mobile Power With Minimal Component Count 5V/1.5A Constant Output Current in Boost Mode 1.5A Switching Charger Programmable
XC95108 In-System Programmable CPLD
PODUCT OBSOLETE / UNDE OBSOLESCENCE 0 XC95108 In-System Programmable CPLD DS066 (v5.0) May 17, 2013 0 5 Features 7.5 ns pin-to-pin logic delays on all pins f CNT to 125 MHz 108 macrocells with 2,400 usable
A4063. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION TYPICAL APPLICATION
DESCRIPTION The is a 2A Li-Ion battery switching charger intended for 5V adapters. Low power dissipation, an internal MOSFET and its compact package with minimum external components requirement makes the
GEN2 SiC Schottky Diode LSIC2SD120A20, 1200 V, 20 A, TO-220-2L. Description. SiC Schottky Diode. Features. Environmental
LSIC2SD12A2, 12 V, 2 A, TO-22-2L LSIC2SD12A2 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating
AN5088 Application note
Application note Rectifiers thermal management, handling and mounting recommendations Introduction The behavior of a semiconductor device depends on the temperature of its silicon chip. This is the reason
Space Products. A subsidiary of Data Device Corporation
Space Products A subsidiary of Data Device Corporation QUALIFICATIONS AND CERTIFICATIONS Beta has manufactured space-qualified standard and custom products for over 15 years. This experience includes being
SN54LS377, SN54LS378, SN54LS379, SN74LS377, SN74LS378, SN74LS379 OCTAL, HEX, AND QUAD D-TYPE FLIP-FLOPS WITH ENABLE
SN54LS377, SN54LS378, SN54LS379, SN74LS377, SN74LS378, SN74LS379 OCTAL, HEX, AND QUAD D-TYPE FLIP-FLOPS WITH ENABLE SDLS167 OCTOBER 1976 REVISED MARCH 1988 PRODUCTION DATA information is current as of
THERMOSTAT PROBE PACKAGES: FAST RESPONSE, TINY STAT TM
THERMOSTAT PROBE PACKAGES: FAST RESPONSE, TINY STAT TM Introduction Klixon 3BT Tiny Stat fast response temperature probes are designed to provide reliable, consistent performance over a long cycle life
Description. Features. Applications. Environmental. Characteristics Symbol Conditions Value Unit Repetitive Peak Reverse Voltage V RRM.
LSIC2SD12C1, 12 V, 1 A, TO-252-2L (DPAK) LSIC2SD12C1 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum
CE3152 Series. Standalone Linear LiFePO4 battery charger with Thermal Regulation INTRODUCTION: FEATURES: APPLICATIONS: PIN CONFIGURATION:
Standalone Linear LiFePO battery charger with Thermal Regulation Series INTRODUCTION: The is a complete constantcurrent constantvoltage linear charger for single cell LiFePO batteries. It s SOT package
Gamma-ray Large Area Space Telescope (GLAST) Large Area Telescope (LAT) DAQ. Latch-up Test of 3 DC-DC MAXIM Converters
Page 1 of 11 Document # Date Effective LAT-TD-2234-1 6/6/3 Author(s) Supersedes Riccardo Rando Hartmut Sadrozinski GLAST LAT Jozsef Ludvig PROCUREMENT DOCUMENT Subsystem/Office DAQ Document Title Latch-up
LSIC2SD065C06A 650 V, 6 A SiC Schottky Barrier Diode
LSICSD065C06A 650 V, 6 A SiC Schottky Barrier Diode Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating
Military/Aerospace FPGA Package and Selector Guide. September 2008
Military/Aerospace FPGA Package and Selector Guide September 2008 Actel Military and Aerospace Package Type and I/O Count M I L I T A R Y A N D A V I O N I C S R A D I A T I O N - T O L E R A N T Package
LV8804FV. Fan Motor Driver. Overview The LV8804FV is a motor driver for PC and server fans. Feature Direct PWM 3-phase sensorless motor driver
Ordering number : ENA1441C LV8804FV Bi-CMOS LSI PC and Server Fan Motor Driver http://onsemi.com Overview The LV8804FV is a motor driver for PC and server fans. Feature Direct PWM 3-phase sensorless motor
GEN2 SiC Schottky Diode. Description. SiC Schottky Diode. Features. Applications. Environmental
GEN2 LSIC2SD12A8, LSIC2SD12C8, 12 V, 8 A, A, TO-252-2L TO-22-2L(DPAK) LSIC2SD12C8 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high
Sequential Circuit Background. Young Won Lim 11/6/15
Sequential Circuit /6/5 Copyright (c) 2 25 Young W. Lim. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free ocumentation License, Version.2 or any later
GEN2 SiC Schottky Diode LSIC2SD120E40CC, 1200 V, 40 A, TO-247-3L. Description. SiC Schottky Diode. Features. Applications.
LSIC2SD12E4CC RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating junction temperature of 175
DT V 1A Standalone Linear Li-ion Battery Charger FEATURES GENERAL DESCRIPTION APPLICATIONS ORDER INFORMATION
GENERAL DESCRIPTION The DT7115 is a highly integrated 5V 1A Li-ion battery linear charging management device. The DT7115 charges a battery in three phases: trickle charging, constant current, and constant
Sierra 80 Volt Brushless DC Motor Controller Product Specification
Sierra 80 Volt Brushless DC Motor Controller Product Specification Assembly 025F0139 600A0620 Rev. A December 2, 2008 025F0139 Brushless DC Motor Controller Page 1 Revision History EC # Date Rev Description
DARE+ DARE+ Design Against Radiation Effects (Digital) Cell Libraries. Jupiter Icy Moons Explorer (JUICE) Instruments Workshop 9 November 2011
DARE+ Design Against Radiation Effects (Digital) Cell Libraries Jupiter Icy Moons Explorer (JUICE) Instruments Workshop 9 November 2011 Objectives (1/2) Provide a suitable and mixed-signal capable microelectronic
CE3211 Series. Standalone 1A Linear Lithium Battery Charger With Thermal Regulation INTRODUCTION: FEATURES: APPLICATIONS:
Standalone 1A Linear Lithium Battery Charger With Thermal Regulation INTRODUCTION: The CE3211 is a complete constant-current/ constant-voltage linear charger for single cell lithium rechargeable battery.
DS1643/DS1643P Nonvolatile Timekeeping RAM
Nonvolatile Timekeeping RAM www.dalsemi.com FEATURES Integrated NV SRAM, real time clock, crystal, power-fail control circuit and lithium energy source Clock registers are accessed identically to the static
SN54LS377, SN54LS378, SN54LS379, SN74LS377, SN74LS378, SN74LS379 OCTAL, HEX, AND QUAD D-TYPE FLIP-FLOPS WITH ENABLE
SN54LS377, SN54LS378, SN54LS379, SN74LS377, SN74LS378, SN74LS379 OCTAL, HEX, AND QUAD D-TYPE FLIP-FLOPS WITH ENABLE SDLS167 OCTOBER 1976 REVISED MARCH 1988 PRODUCTION DATA information is current as of
NOT RECOMMENDED FOR NEW DESIGNS
olt Input NOT RECOMMENDED FOR NEW DESIGNS Series Features 40 C to + C operation 19 to DC input 50 V for 50 ms transient protection Fully isolated Fixed frequency Remote sense on single models Inhibit/sync
LSIC2SD065A20A 650 V, 20 A SiC Schottky Barrier Diode
LSIC2SD065A20A 650 V, 20 A SiC Schottky Barrier Diode RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum
SN54390, SN54LS390, SN54393, SN54LS393 SN74390, SN74LS390, SN74393, SN74LS393 DUAL 4-BIT DECADE AND BINARY COUNTERS
SN54390, SN54LS390, SN54393, SN54LS393 SN74390, SN74LS390, SN74393, SN74LS393 DUAL 4-BIT DECADE AND BINARY COUNTERS SDLS107 OCTOBER 1976 REVISED MARCH 1988 PRODUCTION DATA information is current as of
Actel Military/Aerospace Selector Guide
Actel Military/Aerospace Selector Guide September 2002 Military and Avionics RadHard RadTolerant MiI/Avionics and SpaceProducts Package Pins A1010B A1020B A1240A A1280A A1280XL A1425A A1460A A14100A A32100DX
Description. Features. Applications. Environmental. Characteristics Symbol Conditions Value Unit Repetitive Peak Reverse Voltage V RRM.
LSICSD1A5, 1 V, 5 A, TO--L LSICSD1A5 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating junction
NOT RECOMMENDED FOR NEW DESIGNS
DC/DC Converters olt Input NOT RECOMMENDED FOR NEW DESIGNS Series Features 40 to +85 C operation 18 to DC input (19 to DC input HR301-25) 50 V for 50 ms transient protection Fully isolated Fixed frequency
LSIC2SD120A10. GEN2 SiC Schottky Diode LSIC2SD120A10, 1200 V, 10 A, TO-220-2L. RoHS. Description
LSIC2SD12A1 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating junction temperature of 175
NC7SVL08 TinyLogic Low-I CCT Two-Input AND Gate
NC7SL08 TinyLogic Low-I CCT Two-Input ND Gate Features 0.9 to 3.6 CC Supply Operation 3.6 Over-oltage Tolerant I/Os at CC from 0.9 to 3.6 Power-Off High-Impedance Inputs and Outputs Proprietary Quiet Series
Rev1.0 UCT V 1A Standalone Linear Li-ion Battery Charger GENERAL DESCRIPTION FEATURES APPLICATIONS
5V 1A Standalone Linear Li-ion Battery Charger GENERAL DESCRIPTION The UCT3146 is a highly integrated 5V 1A Li-ion battery linear charging management device. The UCT3146 charges a battery in three phases:
Maintenance/ Discontinued
Servo Interface IC for DAT Overview The is an IC with servo interface function. Features Cylinder FG waveform processing Capstan FG waveform processing Reel FG waveform processing PG signal processing
Hybrid Microcircuit Inherent Reliability for Space Applications
Hybrid Microcircuit Inherent Reliability for Space Applications Jeffrey H Sokol, PhD, CFA Presented at the MEWS 2007 October 29, 2007 (c) 2007 The Aerospace Corporation Outline Abstract Introduction PWB
LSIC2SD065E40CCA 650 V, 40 A SiC Schottky Barrier Diode
LSIC2SD065E40CCA 650 V, 40 A SiC Schottky Barrier Diode RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum
( DOC No. HX8705-B-DS ) HX8705-B
( DOC No. HX8705-B-DS ) HX8705-B 800x600CH EPD Source+Gate Driver Preliminary version 01 800x600CH EPD Source+Gate Driver Preliminary Version 01 1. General Description The HX8705-B is a 800-channel outputs
( DOC No. HX8615A-DS ) HX8615A
( DOC No. HX8615A-DS ) HX8615A Version 05 Mayl, 2005 Version 05 May, 2005 1. General Description The HX8615A is a 240 channel outputs gate driver used for driving the gate electrode of TFT LCD panel. It
STEVAL-TDR028V1. RF power amplifier demonstration board based on the STAC2942B. Features. Description
RF power amplifier demonstration board based on the STAC2942B Features Excellent thermal stability Frequency: 87.5-108 MHz Supply voltage: 48 V Output power: 370 W min. Gain: 20 db typ. Efficiency: 77%
SC61A05. Standalone Linear Li-Lon Battery Charger. With Thermal Regulation. Features. Description. Applications
Standalone Linear Li-Lon Battery Charger With Thermal Regulation Description The SC61A05 is a single-cell lithium-ion battery charger using a constant-current/ constant-voltage algorithm. It can deliver
Bi-CMOS LSI PC and Server. Fan Motor Driver
Ordering number : ENA1441C LV8804FV Bi-CMOS LSI PC and Server Fan Motor Driver Overview The LV8804FV is a motor driver for PC and server fans. Feature Direct PWM 3-phase sensorless motor driver Specifications
HDS 5105 Amplified pressure sensor/switch
FEATURES With one analog and two switching outputs Combined pressure sensor and switch Calibrated and temperature compensated Analog voltage output of 0.5 to 4.5V (ratiometric) Two programmable logic switching
DS1321 Flexible Nonvolatile Controller with Lithium Battery Monitor
19-6312; Rev 6/12 Flexible Nonvolatile Controller with Lithium Battery Monitor FEATURES Converts CMOS SRAM into nonvolatile memory Unconditionally write-protects SRAM when V CC is out of tolerance Automatically
Application Note. DA1468x Battery Charging AN-B-035
Application Note AN-B-035 Abstract This document describes the battery charging operation for a lithium-ion or lithium-polymer battery using the DA1468x device. Contents Abstract... 1 Contents... 2 Figures...
1.2A Single-chip Li-ion and Li-POL Charge
1.2A Single-chip Li-ion and Li-POL Charge General Description The is a complete constant-current / constant-voltage linear charger for single cell lithium-ion batteries. Its ESOP-8 package and low external
ATN3580 Series: Fixed Attenuator Pads
DATA SHEET ATN3580 Series: Fixed Attenuator Pads Applications Attenuators Features Specified flat response to 40 GHz Return loss > 15 db Available at 1-10, 12, 15, 20, 30, and 40 db Power handling to 1
( DOC No. HX8678-A-DS ) HX8678-A
( DOC No. HX8678-A-DS ) HX8678-A Preliminary version 01 July, 2006 Preliminary Version 01 July, 2006 1. General Description The HX8678-A is a 480/320 channels output gate driver used for driving the gate
DT V 800mA Standalone Linear Li-ion Battery Charger FEATURES GENERAL DESCRIPTION APPLICATIONS ORDER INFORMATION
GENERAL DESCRIPTION The DT7102 is a highly integrated 5V 800mA Li-ion battery linear charging management device with standby indicator output. The DT7102 charges a battery in three phases: trickle charging,
2A Switch-Mode Li-Ion Battery Charger
2A Switch-Mode Li-Ion Battery Charger General Description The is a highly integrated switch-mode Li-Ion Battery Charger. With few external components, is well suited for a wide range of portable applications.
SGM4056 High Input Voltage Charger
GENERAL DESCRIPTION The SGM456 is a cost-effective, fully integrated high input voltage single-cell Li-ion battery charger. The charger uses a CC/CV charge profile required by Li-ion battery. The charger
HM5061 Max.1.6A Li-ion Switching Charger IC
Max.1.6A Li-ion Switching Charger IC DESCRIPTION The HM5061 is a 1.6A Li-Ion battery switching charger intended for 5V adapters. Low power dissipation, an internal MOSFET and its compact package with minimum
SN5486, SN54LS86A, SN54S86 SN7486, SN74LS86A, SN74S86 QUADRUPLE 2-INPUT EXCLUSIVE-OR GATES
SN5486, SN54LS86A, SN54S86 SN7486, SN74LS86A, SN74S86 QUADRUPLE 2-INPUT EXCLUSIVE-OR GATES SDLS124 DECEMBER 1972 REVISED MARCH 1988 PRODUCTION DATA information is current as of publication date. Products
FPS2851ULC4 Urea Quality Sensor
Advanced information FPS2851ULC4 Urea Quality Sensor Product performances Real-time urea quality sensing: Urea concentration Urea temperature Detection of unauthorized fluids In development: Identification
SSC Sensor Replacement Board for the SSC Evaluation Kit. Features. Benefits
SSC Sensor Replacement Board for the SSC Evaluation Kit ZSC31XXX / ZSSC3XXX Datasheet Brief Description The SSC Sensor Replacement Board is included in IDT s modular SSC Evaluation Kits, which provide
DATASHEET ISL88001, ISL88002, ISL Features. Applications. Pinouts. Ultra Low Power 3 Ld Voltage Supervisors in SC-70 and SOT-23 Packages
DATASHEET ISL88001, ISL88002, ISL88003 Ultra Low Power 3 Ld Voltage Supervisors in SC-70 and SOT-23 Packages FN6174 Rev 2.00 The ISL88001, ISL88002, ISL88003 supervisors are extremely low power 160nA voltage
Manual 4000 Series Cmos Logic
Manual 4000 Series Cmos Logic 4000 Series CMOS Logic Family Logic CMOS 4000 Series; LEDs and Displays; Transistors. NPN; PNP; Speakers; Switches; Telephone. Extension Kits; Socket Adapters 4000 Series
DV2000S1 and DV2000TS1
Features DV2000S1 and DV2000TS1 Multi-Chemistry Switching Charger Development System Safe management of fast charge for icd, imh, or Li-Ion battery packs On-board switching regulation for up to 3A charge
DS1230Y/AB 256k Nonvolatile SRAM
www.maxim-ic.com FEATURES 10 years minimum data retention in the absence of external power Data is automatically protected during power loss Replaces 32k x 8 volatile static RAM, EEPROM or Flash memory
SEMITOP2,3,4 Press-Fit
Mounting Instruction SEMITOP2,3,4 Press-Fit Revision: 03 Issue date: 2017-08-28 Prepared by: Roberto Agostini Approved by: Werner Obermaier Keyword: SEMITOP, mounting instructions, one screw mounting,
FEATURES DESCRIPTION APPLICATIONS TYPICAL APPLICATION PIN OUT & MARKING. Max.2A Li-ion Switching Charger IC
DESCRIPTION The is a 2A Li-Ion battery switching charger intended for 5V adapters. Low power dissipation, an internal MOSFET and its compact package with minimum external components requirement makes the
BL8578 DESCRIPTION FEATURES APPLICATIONS PIN OUT & MARKING TYPICAL APPLICATION. Max.2A Li-ion Switching Charger IC
1 2 3 4 6 7 8 9 10 1 2 BG I LLHYW 3 BG LLHYW 4 6 7 8 9 10 DESCRIPTION The is a 2A Li-Ion battery switching charger intended for V adapters. Low power dissipation, an internal MOSFET and its compact package
China - Germany - Korea - Singapore - United States - smc-diodes.com
Description: The SLR1117A is a low dropout, three terminals regulator designed to provide output current up to 1A. The device is available in an adjustable version and fixed output voltage of 1.8V, 2.5V
( DOC No. HX8678-B-DS )
( DOC No. HX8678-B-DS ) Preliminary version 01 1. General Description The HX8678-B is a 480-channel outputs gate driver, which is used for driving the gate line of TFT LCD panel. It is designed for 2-level
General Description. Features. Component List. Component Suppliers
General Description The MAX5062A evaluation kit (EV kit) is a fully assembled and tested circuit board that demonstrates the performance of the MAX5062A 60V, 300mA ultra-small, high-efficiency, synchronous
DS1644/DS1644P Nonvolatile Timekeeping RAM
Nonvolatile Timekeeping RAM www.maxim-ic.com FEATURES Integrated NV SRAM, Real-Time Clock, Crystal, Power-Fail Control Circuit and Lithium Energy Source Clock Registers are Accessed Identically to the
500mA Linear Li-Ion Battery Charger in SOT23
500mA Linear Li-Ion Battery Charger in SOT23 General Description The is a standalone linear Li-ion battery charger with exposed pad SOT23 package. With few external components, is well suited for a wide