ELIMINATOR Hermetic filter drier Types DML and DCL

Size: px

Start display at page:

Download "ELIMINATOR Hermetic filter drier Types DML and DCL"

Abigail Brooks
6 years ago
Views:

Data sheet ELIMINATOR Hermetic filter drier s DML and DCL All ELIMINATOR driers have a solid core with binding material held to an absolute minimum. There are two types of ELIMINATOR cores.

1 Data sheet ELIMINATOR Hermetic filter drier s DML and DCL All ELIMINATOR driers have a solid core with binding material held to an absolute minimum. There are two types of ELIMINATOR cores. DML driers have a core composition of 100% Molecular Sieve, while type DCL contain 80% Molecular Sieve with 20% activated alumina. ELIMINATOR type DML driers are designed for applications requiring the highest moisture capacity. ELIMINATOR type DCL driers are designed for applications requiring high moisture capacity and acid adsorption capacity. Available with solder (cu-plated steel connectors) and flare connections. For other connections please contact your Danfoss Sales Representative. Features The Core type DML 100% Molecular Sieve core High drying capacity minimizing the risk of acid formation (hydrolysis) Recommended for use with HFC and HCFC refrigerants Will not deplete oil additives The Core type DCL 80% Molecular Sieve with 20% activated alumina Perfect core blend for systems that operate at high condensing temperatures and require high drying capacity Recommended for use with HFC and HCFC refrigerants The Shell PED approved for PS 46 bar Available with solder (Cu-plated steel connectors) and flare connections Corrosion resistant powder-painted finish. Special coating for marine applications available upon request Allows installation with any orientation provided the arrow is in the flow direction Available in sizes 3 75 cubic inches The Filter 25 μm (0.001 in.) filter provides high retention with minimal pressure drop Thermally stable up to 120 C Danfoss DCS (az) DKRCC.PD.EB0.C H

Introduction ELIMINATOR Hermetic filter driers protect refrigeration and air-conditioning systems from moisture, acids, and solid particles.

10 EVR AKS EKC TCAE SGN GBC DML / DCL GBC Technical data Flare connection Surface and volume Filter drier volume (shell volume) Filter drier volume (net volume) Filter Solid core surface Solid core

2 Approvals UL US, file no. SA 6398 PED 97/23/EC - a3p3 Compliant with ATEX hazard zone 2 Note: Only solder versions (cu-plated / pure copper) and connection sizes below 25 mm are approved for flammable refrigerants now. Introduction ELIMINATOR Hermetic filter driers protect refrigeration and air-conditioning systems from moisture, acids, and solid particles. With these contaminants eliminated, systems are safer from harmful chemical reactions and from abrasive impurities. Danfoss R EVR AKS EKC TCAE SGN GBC DML / DCL GBC Technical data Flare connection Surface and volume Filter drier volume (shell volume) Filter drier volume (net volume) Filter Solid core surface Solid core volume [cm 2 ] [cm 2 ] [l] [l] DML/DCL DML/DCL DML/DCL DML/DCL DML/DCL DML/DCL DML/DCL DML/DCL Solder connection (cu-plated steel connectors) Filter Acid capacity 1 ) [g] DCL DCL DCL DCL DCL DCL DCL DCL ) Adsorption capacity of oleic acid at 0.05 TAN (Total Acid Number). Temperature range: C Maximum working pressure: PS 46 bar Danfoss DCS (az) DKRCC.PD.EB0.C H

3 Technical data and capacities Drying and liquid capacity, type DML Drying capacity [kg] refrigerant 1 ) Liquid capacity [kw] 2 ) R134a R404A R507 R22 R407C R410A R32 [ C] R134a R404A R507 R22 R407C R410A R DML 032/032s DML 032.5s DML 033/033s DML 034s DML 052/052s DML 052.5s DML 053/053s DML 054s DML 055s DML 082/082s DML 082.5s DML 083/083s DML 084/084s DML 085/085s DML 162/162s DML 162.5s DML 163/163s DML 164/164s DML 165/165s DML 166/166s DML 167s DML 303/303s DML 304/304s DML 305/305s DML 306/306s DML 307s DML 309s DML DML 414/414s DML 415/415s DML 417s DML 419s DML 604s DML 607s DML 609s DML 757s DML 759s ) Drying capacity is based on following moisture content test standards before and after drying: R32: ppm W R134a: ppm W R404A, R507: ppm W R407C: ppm W R410A: ppm W R22: ppm W In accordance with ARI ) Given in accordance with ARI for t e= -15 C t c= 30 C Δp = 0.07 bar For technical data on other refrigerants, please contact your Danfoss Sales Representative Danfoss DCS (az) DKRCC.PD.EB0.C H

4 Technical data and capacities (continued) Drying and liquid capacity, type DCL Drying capacity [kg] refrigerant 1 ) Liquid capacity [kw] 2 ) R134a R404A R507 R22 R407C R410A R32 [ C] R134a R404A R507 R22 R407C R410A R32 DCL 032/032s DCL 032.5s DCL 033/033s DCL 052/052s DCL 052.5s DCL 053/053s DCL 082/082s DCL 082.5s DCL 083/083s DCL 084/084s DCL 162/162s DCL 162.5s DCL 163/163s DCL 164/164s DCL 165/165s DCL 166/166s DCL 167s DCL 303/303s DCL 304/304s DCL 305/305s DCL 306/306s DCL 307s DCL 309s DCL DCL 414/414s DCL 415/415s DCL 417s DCL 419s DCL 604s DCL 607s DCL 609s DCL 757s DCL 759s ) Drying capacity is based on following moisture content test standards before and after drying: R32: ppm W R134a: ppm W R404A, R507: ppm W R407C: ppm W R410A: ppm W R22: ppm W In accordance with ARI ) Given in accordance with ARI for t e= -15 C t c= 30 C Δp = 0.07 bar For technical data on other refrigerants, please contact your Danfoss Sales Representative Conversions Drops of water = (1 kg of refrigerant (Initial PPM of water - Final PPM of water)) 50 See ARI standard for recommended initial and final PPM values for different refrigerants. Danfoss DCS (az) DKRCC.PD.EB0.C H

5 Ordering DCL Flare Connection size Multi pack Industrial pack for OEM only [in.] [mm] Code no. Qty. Code no. Qty. DCL Z ) 32 DCL Z DCL Z ) 32 DCL Z DCL Z Z DCL Z Z DCL Z Z DCL Z Z DCL Z DCL Z Z DCL Z Z DCL Z Z DCL Z Z DCL Z DCL Z DCL Z Z DCL Z Z DCL Z DCL Z DCL Z ) Wire mesh in filter drier outlet Danfoss DCS (az) DKRCC.PD.EB0.C H

6 Ordering (continued) DML Flare Connection size Multi pack Industrial pack for OEM only [in.] [mm] Code no. Qty. Code no. Qty. DML Z ) Z ) 28 DML Z ) Z ) 28 DML Z DML Z Z DML Z Z DML Z Z DML Z Z DML Z Z DML Z DML Z Z DML Z Z DML Z Z DML Z Z DML Z DML Z Z DML Z Z DML Z Z DML Z Z DML Z DML Z DML Z DML Z Z DML Z Z ) Wire mesh in filter drier outlet Danfoss DCS (az) DKRCC.PD.EB0.C H

7 Ordering (continued) DCL Solder (cu-plated steel connectors) Conn. size Multi pack Industrial pack for OEM only Conn. size Multi pack Industrial pack for OEM only [in.] Code no. Qty. Code no. Qty. [mm] Code no. Qty. Code no. Qty. DCL 032s Z Z Z Z DCL 032.5s Z Z DCL 033s Z Z DCL 052s Z Z Z Z DCL 052s Z DCL 053s Z Z Z DCL 082s Z Z DCL 082s Z DCL 083s Z Z Z Z DCL 084s Z Z Z DCL 162s Z Z DCL 163s Z Z Z DCL 164s Z Z Z DCL 165s Z Z DCL 166s Z DCL 167s 7 /8 023Z DCL 303s Z Z Z DCL 304s Z Z DCL 305s Z Z DCL 306s Z Z DCL 307s Z Z DCL 309s Z Z DCL 414s Z DCL 415s Z DCL 417s Z DCL 419s Z Z DCL 604s Z DCL 607s Z DCL 609s Z DCL 757s Z DCL 759s Z Z Danfoss DCS (az) DKRCC.PD.EB0.C H

8 Ordering (continued) DML Solder (cu-plated steel connectors) Conn. size Multi pack Industrial pack for OEM only Conn. size Multi pack Industrial pack for OEM only [in.] Code no. Qty. Code no. Qty. [mm] Code no. Qty. Code no. Qty. DML 032s Z Z Z Z DML 032.5s Z Z DML 033s Z Z Z Z DML 034s 1 /2 023Z Z DML 052s Z Z Z Z DML 052.5s Z DML 053s Z Z Z Z DML 054s Z Z Z DML 055s Z Z DML 082s Z Z Z Z DML 082.5s Z DML 083s Z Z Z Z DML 084s Z Z Z Z DML 085s Z DML 162s Z Z DML 163s Z Z Z Z DML 164s Z Z Z Z DML 165s Z Z DML 166s Z Z DML 167s 7 /8 023Z DML 303s Z Z DML 304s Z Z Z Z DML 305s Z Z DML 306s Z Z DML 307s Z Z DML 309s Z Z DML 414s Z Z DML 415s Z DML 417s Z Z DML 419s Z Z Z DML 604s Z Z DML 605s Z DML 607s Z Z DML 609s Z Z DML 757s Z Z DML 759s Z Z Z Danfoss DCS (az) DKRCC.PD.EB0.C H

9 Identification codes Codes Description Filter drier D Drier Solid core Application L Liquid line Size (volume) Connection (filter connection in 1 8 of an inch increments) Connection type C M 03 3 in in in in in in in in in. 3 80% Molecular Sieve / 20% activated alumina 100% Molecular Sieve core in. / 6 mm in. / 8 mm in. / 10 mm in. / 12 mm in. / 16 mm in. / 18 (19) mm in. / 22 mm in. / 28 mm (blank) s Flare connection Solder connection Example for type codes D C L 05 3 s Filter drier Solid core Application Size (volume) Connection (filter connection in 1 8 of an inch increments) Connection type Danfoss DCS (az) DKRCC.PD.EB0.C H

10 Selection selection is made considering the application Refrigerant and oil types DCL DML HFO Recommended Recommended Refrigerant HC 1 ) Recommended Recommended HFC Recommended Recommended HCFC Recommended Recommended Mineral or AB Recommended Recommended Oil POE or PAG, pure Recommended Recommended POE or PAG, with additives Not recommended 2 ) Recommended 1 ) Only solder versions (cu-plated / pure copper) and connection sizes below 25 mm are approved for flammable refrigerants now. 2 ) DCL Hermetic filter driers contain activated alumina, which is a polar material used for acid adsorption. Many oil additives are also polar substances and can be adsorbed by the activated alumina, rendering them useless, and reducing the drier s acid capacity, though this is not harmful to the system. Selection example Select the appropriate type (DML or DCL) based on refrigerant and oil type. Then select the drier size based on the adsorption and liquid capacity required. a. Amount of charge: 25 kg R134a at tl= 24 C To dry 25 kg R134a at 24 C from 1050 to 60 ppm moisture, a DML 16 is necessary b. Cooling capacity: Qe= 20 kw To obtain a mass flow corresponding to 20 kw cooling capacity with a DML 16 filter drier, a 3 8 inch connection must be chosen. Larger connections can be chosen in accordance with the liquid line dimension c. Result DML 163 or DML 163s can be used If the initial moisture content is very small or a planned change of the filter drier is considered, a smaller filter drier size can be chosen. Drying capacity [kg] refrigerant 1 ) Liquid capacity [kw] 2 ) R134a R404A R507 R22 R407C R410A R32 [ C] R134a R404A R507 R22 R407C R410A R DML 1.52s DML 1.52x2/2s DCL 032.5s DCL 033/033s DML 163/163s DML 164/164s DML 165/165s DML 166/166s DML 167s DML 303/303s DCL 084/084s DCL 162/162s Danfoss DCS (az) DKRCC.PD.EB0.C H

11 Design / Function DML / DCL 03 DML / DCL 05 DML / DCL 08, DML / DCL 16 DML / DCL 30, DML / DCL 41 Danfoss 23Z DML / DCL 60, DML / DCL Inlet 2. Spring 3. Solid core 4. Polyester mat 5. Perforated plate 6. Seal cap, flare connection 7. Seal cap, solder connection The relatively large diameter of the hermetic filter drier means that the liquid flow velocity is suitably low and the pressure drop minimal. Powder formation is eliminated because the solid core grains are bonded and cannot move against each other. Danfoss DCS (az) DKRCC.PD.EB0.C H

12 Dimensions and weights Flare connections A A1 A2 L D1 D2 Net weight [mm] [mm] [mm] [mm] [mm] [mm] [Kg] DCL / DML DCL / DML A A1 A2 L D1 D2 Net weight [mm] [mm] [mm] [mm] [mm] [mm] [Kg] DCL / DML DCL / DML Danfoss DCS (az) DKRCC.PD.EB0.C H

13 Dimensions and weights (continued) Flare connections A A1 A2 L D1 D2 Net weight [mm] [mm] [mm] [mm] [mm] [mm] [Kg] DCL / DML DCL / DML DCL / DML DCL / DML DCL / DML DCL / DML DCL / DML DCL / DML DCL / DML A L D1 D2 Net weight [mm] [mm] [mm] [mm] [Kg] DCL / DML DCL / DML DCL / DML DCL / DML DML DCL / DML DCL / DML DCL / DML Danfoss DCS (az) DKRCC.PD.EB0.C H

14 Dimensions and weights (continued) Solder connection (cu-plated steel connectors) Danfoss 23Z80.10 A A1 A2 B L D1 D2 Net weight [mm] [mm] [mm] [mm] [mm] [mm] [mm] [Kg] DCL / DML 032s DCL / DML 032.5s DCL / DML 033s DCL / DML 034s Danfoss 23Z81.10 A A1 A2 B L D1 D2 Net weight [mm] [mm] [mm] [mm] [mm] [mm] [mm] [Kg] DCL / DML 052s DCL / DML 052.5s DCL / DML 053s DCL / DML 054s DCL / DML 055s Danfoss DCS (az) DKRCC.PD.EB0.C H

15 Dimensions and weights (continued) Solder connection (cu-plated steel connectors) Danfoss 23Z82.10 A A1 A2 B L D1 D2 Net weight [mm] [mm] [mm] [mm] [mm] [mm] [mm] [Kg] DCL / DML 082s DCL / DML 082.5s DCL / DML 083s DCL / DML 084s DCL / DML 085s DCL / DML 162s DCL / DML 162.5s DCL / DML 163s DCL / DML 164s DCL / DML 165s DCL / DML 166s DCL / DML 167s Danfoss DCS (az) DKRCC.PD.EB0.C H

16 Dimensions and weights (continued) Solder connection (cu-plated steel connectors) Danfoss 23Z83.10 A B L D1 D2 Net weight [mm] [mm] [mm] [mm] [mm] [Kg] DCL / DML 303s DCL / DML 304s DCL / DML 305s DCL / DML 306s DCL / DML 307s DCL / DML 309s DCL / DML 414s DCL / DML 415s DCL / DML 417s DCL / DML 419s DCL / DML 604s DCL / DML 606s DCL / DML 607s DCL / DML 609s DCL / DML 757s DCL / DML 759s Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary eady agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved. Danfoss DCS (az) DKRCC.PD.EB0.C H

ELIMINATOR Hermetic filter drier Types DML and DCL

MAKING MODERN LIVING POSSIBLE Data sheet ELIMINATOR Hermetic filter drier Types DML and DCL All ELIMINATOR driers have a solid core with binding material held to an absolute minimum. There are two types