THREE AXLE TRAILER PRONAR T780 (PALLET TRANSPORTATION WIDTH)

Transcription

1 PRONAR

2 PRONAR TRAILER T780 THREE AXLE TRAILER PRONAR T780 (PALLET TRANSPORTATION WIDTH) Technical data* Permissible total weight: 24000* Empty weight: 7700 Load capacity: 16300** Load volume: 26 [m 3 ] Loading space: 18,55 [m 2 ] Loading case inside lenght: 7696 Loading case inside width: 2410*** Lenght/Width/Height 10087/2548/ 2800 Sidewall height: Floor/wall thickness 5/2.5 Platform height, measured from the ground: 1390 Wheel track: 1900 parabolic springs 385/65 R22.5 RE Maximum speed: 40 [km/h] Tipping system : No. of telescopic cylinders: Number of tipping cylinder sections: 3-side 2 5 Piston stroke: 2990 Oil requirement: 68 [l] Working pressure: 200 [bar] Tractor power requirement: 150/110.2 [hp/kw] Tipping angle (backwards/sides): 47/45 [ ] * depends on the road regulations in each country ** depends on the road regulations and equipment *** width of the loading case suitable for EUROPALET transport

3 PRONAR TRAILER T682 PRONAR T682/1 TRIDEM TYPE MONOCOQUE TRAILER Technical data* Allowable total weight (technically): Permissible total weight: (33000*) Load capacity: (24000*) Empty weight: 9000 Load volume without extensions: 22 [m 3 ] Load volume with extensions 580mm: 32 (option) [m 3 ] Loading space: 17,8 [m 2 ] Loading case inside lenght: 8000 Loading case inside width: trapezoid: 2200/2250 Dimensions: lenght/width/height: 9900/2550/3330 Sidewall height: 1200 Floor/wall thickness: 5/4 Platform height, measured from the ground: 1495 Wheel track: 2100 Hitch-ring load: parabolic springs 3000 Maximum speed: 385/65 R22.5 RE 40 [km/h] Tipping system: Hydraulic supply: Tipping cylinder (piston stroke/oil requirement/working pressure) 2 telescopic cylinders, 1-side seperate tank, pump 2990mm/72L/200bar Tractor power requirement: 182/133.8 [hp/kw] Tipping angle (backwards): 50 [ ] * Type, permissible total weight, load capacity is authorised to use this trailer on the public roads on the territory of Poland

4 PRONAR TRAILER T679M / T700XL PRONAR T679M TANDEM TYPE MONOCOQUE TRAILER - NEW MODEL Technical data Permissible total weight: Load capacity: Empty weight: 4200 Load volume (without extensions): 13.2 [m 3 ] Loading space: 10.4 [m 2 ] Loading case inside length: 4800 Loading case inside width: trapezoid: 2140/2200 Dimensions: length/width/height: 6797/2550/2460 Sidewall height: 1200 Floor/wall thickness: 4/4 Platform height, measured from the ground: 1260 Wheel track: 1960 parabolic springs Hitch-ring load: /65 R22.5 RE Maximum speed: 40 [km/h] Tipping system: Tipping cylinder (piston stroke/oil requirement/working pressure) 1-side 1700mm/13L/200bar Tractor power requirement: 83.2/61 [hp/kw] Tipping angle (backwards): 50 [ ] PRONAR T700XL TANDEM TYPE MONOCOQUE TRAILER Technical data* Allowable total weight (technically): Load capacity: Empty weight: 6000 Load volume with extensions without extensions: 26,6 [m 3 ] Loading space: 13,7 [m 2 ] Loading case inside length: 6700 Loading case inside width: 2240/2300 Dimensions: lenght/width/height: 8520/2550/3060 Sidewall height (inside): (option) Floor/wall thickness: 4/4 Platform height, measured from the ground: 1290 Wheel track: 1960 Hitch-ring load: parabolic springs 4000 Maximum speed: 385/65R [km/h] Tipping system: 1-side Tipping cylinder (piston stroke/oil requirement/working pressure): 2990mm/40L/200bar Tractor power requirement: 136.7/100,5 [hp/kw] Tipping angle (backwards): 55 [ ] * Technical data for trailer without extensions 600 mm

5 PRONAR TRAILER T679/2 T679/3, T701 TANDEM TYPE DUMP TRAILER PRONAR T679/2 T701 T679/3 Boogie type Technical data Allowable total weight (technically): Permissible total weight: Load capacity: Empty weight: 4350 Load volume: [m 3 ] ,44 Loading space: Loading case inside length: Loading case inside width: Dimensions: length/width/height: Sidewall height: Floor/wall thickness: Platform height, measured from the ground: Wheel track: Hitch-ring load: Maximum speed: [m 2 ] [km/h] / /2546/ / /2550/ / parabolic springs /65 R22.5 RE 40 Tipping system: 2 telescopic cylinders, 1-side Tipping cylinder: 1980mm/36L/200bar Tractor power requirement: Tipping angle (backwards): [hp/kw] [ ] 83.2/ / /2550/ / tandem with trailing arm / side 1700mm/13L/200bar 69.4/51 50

6 PRONAR NV161 Manure spreader PRONAR SINGLE AXLE MANURE SPREADER - V type NV161/1 NV161/2 NV161/3 NV161/4 NV161/ Technical data Permissible total weight: Load capacity: Empty weight: Load volume: 9,1 10,7 11,8 13,1 14,9 [m 3 ] Loading space: 6,7 6,7 6,7 7,5 8,5 [m 2 ] Loading height: Dimensions: length/width/height: 7250/2540/ /2540/ /2760/ /3090/ /2950/2800 Dimensions of the loading case. length/width/height: 4500/ / / / / / / / / /1500 Floor thickness: Wall thickness: Wheel track: Hitch ring load: Single axle, fixed 2000 Single axle, fixed 2500 Single axle, fixed 3000 Single axle, fixed 3000 Single axle, fixed 4000 Construction speed: /65R26 (28.1R26) /75R32 30 [km/h] Minimum tractor power requirement: [hp/kw] PTO range: [rpm] Adapter type: vertical 2-beaters vertical 2-beaters vertical 2-beaters vertical 2-beaters vertical 2-beaters [ -] Max. spreading width: [ m]

7 PRONAR N262/1 Manure spreader PRONAR N262/1 TANDEM AXLE MANURE SPREADER Technical data Permissible total weight: 21200* Load capacity: 14000* Empty weight: 7200** Load volume: 14 [m 3 ] Loading space: 11,1 [m 2 ] Internal length of Loading space: 5600 Internal width of Loading space: trapezoid: 1955/1995 Dimensions: length/width/height: 9000/2550/3740*** Sidewall height: 1265**** Floor/wall thickness: 4/3 Platform height, measured from the ground: 1530 Wheel track: 1940 tandem - parabolic springs Hitch-ring load: / Construction speed: 40 [km/h] PTO range: 1000 [rpm] Minimum tractor power requirement / adaptor type 147.4/108.3 [hp/kw] Adapter type / max spreading width AH20/25 [-/m] * Permissble construction parameters, may be different for homologation ** Parameters depend of the equipment specification *** Height with front mesh **** Height with a protective wooden batten

8 PRONAR TRAILER T026 /T028KM PRONAR THREE AXLE BALE TRANSPORTATION TRAILER T026 Technical data Technically permissible total weight: Permissible total weight: Load capacity: Empty weight: Loading space: 24 (26,2*) 23,8 (26,4) [m 2 ] Loading platform length: /11000 Loading space length: 9880 (10770*) Loading platform width: 2435** 2470/2400 Dimensions: length /width/height: 11995***/2500/ /2530/2900 Loading platform height: 1680 Ladders height measured from the platform: 1790 Platform thickness: 3 3 Platform height, measured from the ground: Wheel track: Maximum speed: 500/ parabolic springs 445/45R19,5 40 [km/h] Tractor power requirement: 93.6/ ,8/91,8 [hp/kw] * With pulled out rear frame exending the platform length ** EURO pallets transportation widht *** platform length T028KM

9 PRONAR TRAILER T046 /T046/1 ja 2 PRONAR T046 SINGLE /TANDEM AXLE CATTLE TRAILER T046 Single T046 /1 Tandem T046 /2 Tandem Technical data Permissible total weight: Load capacity: Empty weight: Loading space: 9.01* * [m 2 ] Loading case inside length: Loading case inside width: Loading case inside height: 2100** Dimensions: length/width/height 6100/2515/ /2515/ /2530/2800 Sidewall height: Floor thickness (impregnated wood) /sidewalls (waterproof plywood): 30/18 30/18 4/3 Platform height, measured from the ground: /130 Wheel track: Hitch-ring load: fixed 600 tandem with leaf springs 1000 hydraulic 1500 Maximum speed: 11.5/ / / [km/h] Tractor power requirement: 28.6/ / /47.8 [hp/kw] * surface without inner wheel arches ** height from the ground to the highest point of the canvas cover frame

10 PRONAR TRAILER T386 PRONAR T386 THREE AXLE HOOK TRAILER Technical data Allowable total weight (technically): Permissible total weight: Load capacity (including wight of container): Empty weight: 8000 Lenght without a container: 8590 Width without a container: 2550 Width with a container: 2550 Attachement dimensions of the container: Hook height: (min/max): 1450/1570 Rolls track: 1060 Permissible dimensions of the container: Internal lenght (min/max): 5000/7500 External width: max Internal height: max Height of the trailer without container: 3030 Container maximum tipping angle: 52 [ ] Wheel track: 2100 tridem with parabolic springs and axle base 1810 mm Hitch-ring load: 3000 Construction speed: 445/65 R [km/h] Tractor power requirement: 182/133,8 [HP/kW]

11 PRONAR TRAILER T286 / T285 /T185 PRONAR T286/T285/T185 HOOK winch TRAILER Technical data T286 T285 T185 Allowable total weight (technically): Permissible total weight: Load capacity: * 12130* Empty weight: Lenght without a container: Lenght with the shortest/longest container: 7870/ / /6782 Width without a container: Width with a container: /2550 Attachement dimensions of the container: Hook height: (min/max): 1450/ / /1570 Rolls track: Permissible dimensions of the container: Lenght: (min/max): 5400/ / /5050 Internal lenght: (min/max): 5000/ /6600 Width: max 2550 max 2550 max 2550 Internal height: max 2000 max 2500 Height: max 2000 Ground clearance under the floor: min. 150 min. 150 Height of the trailer without container: Height of the guide rollers from the ground: Container maximum tipping angle/oil requirement/oil pressure: 50/25/200 53/18/200 46/15/200 [ /l/bar] Wheel track: parabolic springs Trailer with trailing arm Hitch-ring load: /65 R /65 R22.5 RE 500/50-17 Construction speed: [km/h] Tractor power requirement: 125/92 110/ /57.3 [KM/kW] * with the weight of the container with recommended lengh, it might be neccesary to move the container backwards while preparing for tipping.

12 PRONAR TRAILER T740 / T743 Technical data Technically permissible total weight: Permissible total weight: Load capacity: Empty weight: * Load volume: [m 3 ] UnLoad capacity: [t/h] Loading case inside lenght: Loading case inside width: Dimensions (Lenght/Width/Height): 9142/2900/ /2900/3660 Sidewall height: Thickness of floor/sidewalls/extensions: 4/4/3 4/4/3 Distance from base to the platform: Wheel track: Tandem on parabolic springs with Tridem type on parabolic springs passively steered rear axle with active steering Hitch-ring load: Maximum speed: 700/50-26, /50-26,5 40 [km/h] Tractor power requirement: 165/121,3 220/161,7 [hp/kw] Hydraulically folded coveyor: Diameter: Lenght: Height of the edge of unloading port: * approximately PRONAR T743 CHASER BIN T740 T743

13 PRONAR TRAILER T902 / T900 PRONAR T900 POWER PUSH TRAILER T902 T900 Technical data Technically permissible total weight: Permissible total weight: Load capacity: Empty weight: Load volume: 30, [m 3 ] Loading space: [m 2 ] Loading case inside length: Loading case inside width: Length/Width/Height: 9100/2550/ /2595/3543 Sidewall height: Floor/wall thickness: 4/4 6/4 Platform height, measured from the ground: Wheel track: /2200 Hitch-ring load: parabolic springs 3000 parabolic springs 3000 Maximum speed: 550/ / [km/h] Unloading system: Oil requirement: movable + tipping 30 movable + tipping 40 [l] Working pressure: [bar] Tractor power requirement: 124.8/ /133.8 [hp/kw] Movable wall tipping angle: [ ]

14 PRONAR TRAILER T400 PRONAR T400 FORAGE WAGON Technical data Allowable total weight (technically): Permissible total weight: Load capacity: Empty weight: 7450 Load volume: 40 [m 3 ] Loading space: [m 2 ] Loading case inside lenght: 8000 Loading case inside width: trapezoid 2080/2130 Dimensions: length/width/height: 10100/2900/3950 Sidewall height: 2260 Loading case thickness (sides): 0,75 Distance from base to the platform: 1690 Wheel track: 2200 Axle base: 1810 Tandem on parabolic springs with passively steered axle Hitch-ring load: 2000 Maximum speed: 700/ [km/h] Tractor power requirement: 160/118 [hp/kw]

15 PRONAR TRAILER RC2100 PRONAR RC2100 LOW-LOADING TRAILER RC2100 RC2100/1 RC2100/2 Technical data for standard version: Permissible total weight: Load capacity: Empty weight: Loading space of the straight part of platform (+ widening): Loading space of the complete platform (+ widening): 15.3 (+ 3.0) 14.0 [m 2 ] 19.2 (+ 3.8) 17.9 * [m 2 ] Length of the straight part of the platform: Length of the complete platform: 7020* 7520* 7020 * Length of ramps: Width of floor: 2540 Width of floor (with widening): 2540 (3040**) 2540 (3040**) 2540 ( ***) Overall dimensions (length/width/height): 9160/2550/2500* 9590/2550/2500 * 9450/2550/2460 * Material of the floor: wooden planks 45 mm wooden planks 45 mm wooden planks 45 mm Platform height, measured from the ground: Number of axles: [pcs] Axle load: Drawbar towing hitch load: parabolic springs double 215/75 R 17.5 Maximum speed: [km/h] Load holders: [pcs] Tractor power requirement: 104/ / /76.4 KM/kW * with folded ramps ** with additional equipment *** RC2100/2 trailer can not be equipped with widenings 14.0 (+ 2.7) 17.9 (+ 3.4) parabolic springs double 215/75 R 17.5 parabolic springs double 215/75 R 17.5

16 PRONAR ROTARY TEDDER /RAKE MACHINES C malli sisältää murskaimen 4,2 m Number of working arms 11 Number of raking fingers on one arm 4 Working efficiency 4,6 ha/h Central gear wet (oil bath) Power requirement 22/30 kw/hp PTO speed 540 rpm Linkage system Fixed category 1 and 2 Recommended moving speed 10 km/h Tires kg PTO shaft ZKP PRONAR Rotary rake ZKP420 PRONAR Disc mover PDD830[830C] Technical specification of standard equipment 8,30m (with PDF-300 grass mower) Swath width min/max 2x(1,2 / 2,0) m [2x(1,5/2,5)] Working efficiency 10* ha/h Number of disks 2 7 Number of knives 2 14 Power requirement 88/120 kw/hp [110/150 kw/hp] PTO speed 1000 rpm Linkage system Category 2 and 3 acc. ISO Recommended moving speed 10 km/h kg [1890 kg] Quick knifes replacement PTO shaft Additional set of knifes Spray RAL ml PWP ZKP PRONAR Rotary tedder PWP770 7,7 m Number of rotors 6 Number of tine arms on each rotor 7 Working efficiency 7,7 ha/h Central gear wet (oil bath) Rotary gear maintenance-free (lubricated with grease) Upward ground tracking middle module up to 30 Downward ground tracking middle module up to 6 Upward ground tracking final module up to 6 Downward ground tracking final module up to 6 Power requirement 37/50 kw/hp PTO speed 540 rpm Linkage system Active category 1 and 2 Recommended moving speed 10 km/h Spreading angle regulation Tires 16 6, kg PTO shaft PRONAR rake ZKP800 7,0/8,0 m Swath width 0,9/1,9 m Rotor diameter 3,1 m Linkage system Category 1 and 2 Number of rotors 2 Number od working arms 11 Number of raking fingers on one arm 4 Rotary gear maintenance-free (lubricated with grease) Rotor tires Pneumatic on tandem axle, front axle steering16x6,5-8 Tuming wheel of the drawbar Pneumatic 10,0/75-15,3 PTO speed 540 rpm Power requirement 59/80 kw/hp 1950 kg PTO shaft Rubber wheels 400/60 15,5 Special order PDD PDD830C

17 PRONAR DISC MOVERS C malli sisältää murskaimen PRONAR Disc mover PDF300 [PDF300C] 3.0 m Swath width min/max 1.2/2.0 m [1.5/2.3] Working efficiency 3 ha/h Number of disks 7 Number of knives 14 Power requirement 44/60 kw/hp [55/75 kw/hp] PTO speed 1000 rpm Linkage system Cat. II acc. ISO Recommended working speed 10 km/h 780 kg [1020 kg] Quick knifes replacement PTO shaft Additional set of knifes Spray RAL ml PDF PDF300C C malli sisältää murskaimen PRONAR Disc mover PDT300C PRONAR Disc mover PDT340 PRONAR Disc mover PDT m Swath width min/max 1.5/2.3 m Working efficiency 3 ha/h Number of disks 7 Number of knives 14 Power requirement 55/75 kw/hp PTO speed 1000 rpm Linkage system Category 2 and 3 acc. ISO Recommended working speed 10 km/h 930 kg Quick knifes replacement PTO shaft Additional set of knifes Spray RAL ml m Swath width min/max 1.5/2.4 m Working efficiency 3.4 ha/h Number of disks 8 Number of knives 16 Power requirement 59/80 kw/km PTO speed 1000 obr/min Linkage system Category 2 and 3 acc. ISO Recommended working speed 10 km/h 800 kg Swath width adjustment wheels Double Quick knifes replacement PTO shaft Additional set of knifes Spray RAL ml 3.0 m Swath width min/max 1.2/2 m Working efficiency 3 ha/h Number of disks 7 Number of knives 14 Power requirement 44/60 kw/hp PTO speed 1000 rpm Linkage system Category 2 and 3 acc. ISO Recommended working speed 10 km/h 740 kg Quick knifes replacement Swath width adjustment wheels Double PTO shaft Additional set of knifes Spray RAL ml

18 PRONAR SNOW PLOWS PRONAR PU-2200E /2190 mm Hydaulic power supply MPa max. 10 km/h Number of working positions 3 Mouldboard turning manual Adjusted to carrier Power demand Max 60 HP Clearance lights Blades Rubber without sock absorption Weigh 240 kg PRONAR PUV-4000HD Power requirement [HP] kg Width L=R=3280, S=3420, SO=3140 Electric power [V] 12 Hydraulic power supply [MPa] on carrier 3-point hitch cat. II (ISO) Working positions 4 fixed Steering Electrohydraulic (independent) Plowshares vertical steel with springs L=R =left/right, S= symetrical V-position, SO= Y-position for scooping Number of working positions Cutting edges Shock absorption of the cutting edge Control Hydaulic power supply Electric power supply Clearance lights Power demand Skids PRONAR PU-2600 & PU-3300 PU-2600 PU-3300 Category 2 and 3 three-point hitch, rotary 2300/ /2900 mm 2 (possibility of mediate positions) Metal Soft on polyurethane foam Hydraulic from tractor MPa 12 V 10 km /h 80 /150 HP 660 kg 680 kg Number of working positions Cutting edges Power demand Control Hydraulic power supply Clearance lights PRONAR PU Category 1 and 2 three-point hitch, rigid type L=R=1260/max mm 2 (possibility of mediate positions) Rubber max. 30 HP Hydraulic from carrier MPa standard 10 km/h kg PRONAR PUS-S PUS-S27 PUS-S32 PUS-S34 PUS-S36 PUS-S40 : 0 working angle : 30 working angle L=P=2350* L=P=2790* L=P=2960* L=P=3135* L=P=3490* Total widht Total height 1170/1610** Number of segments [szt] kg 1030kg 1050kg 1100kg 1200kg Angle turning Plowshares DIN type A utility board ± 30 rigid rubber plowshare Power demand and working speed 24 V / max. 60km/h Steering method panel in driver s cab Supporting wheels, marker lights, parking stands, hydraulic instalation, parking stands side bumpers, 2 cylinders for mouldboard turning, 1 cylinder for vertical movement, 1 downforce spring per segment PUS-S PUS-S PUS-S PUS-S PUS-S

19 PRONAR SNOW PLOWS PRONAR Kacper PU1700 a PU2100 a Number of working positions Cutting edges Control Hydaulic power supply Electric power supply Clearance lights Power demand PU-1700 PU-2100 Category 1 and 2 three-point hitch, rigid suspension 1680/ /2210 mm 4 Rubber or hardox rubber, tiltable Electrohydraulic from carrier MPa 12 V 10 km/h HP 250/316 kg 265/330 kg PRONAR PU-T /2000 mm Hydaulic power supply MPa 10 km/h 3- point hitch cat. 2 according to ISO Power demand Max 150 HP Blades Metal or rubber option Front or rear 410/390 kg PRONAR PUV-2600 a PUV-2800 a Number of working positions Cutting edges Shock absorption of the cutting edge Control Hydaulic power supply Electric power supply Clearance lights Power demand Skids PUV-2600 PUV-2800 Category 2 three-point hitch, swing suspension 2320/ /2550 mm 4 Metal On springs Electro -hydraulic MPa 12 V 10 km /h 80 /150 HP 565/650 kg 595/680 kg PRONAR PUV-3000 a PUV-3300 a Number of working positions Cutting edges Shock absorption of the cutting edge Control Hydaulic power supply Electric power supply Clearance lights Power demand Skids PUV-3000 PUV-3300 Category 2 three-point hitch, swing suspension 2660/ /2990 mm 4 Metal On springs Electro -hydraulic from carrier MPa 12 V 10 km /h 100 /200 HP 755/860kg 800/895 kg Snowplows for trucks PRONAR PU-S25H, PU-S32H, PU-S35H PU-S25H PU-S32H PU-S35H DIN TYPE B plate DIN TYPE A plate mm Cutting edges Control Hydaulic power supply Electric power supply Rubber, with out shock absorption Electrohydraulic with floating position and clamp Hydraulic feeder V Clearance lights and Erich Jaeger connector km/h Carrier load capacity Max 8 t with driv to axes or more or over 8 t Max 8 t, with 2 (or more) axle drive or more then 8 t 335/ / /710 kg Working height Cutting edges Control Hydraulic power supply Electric power supply Lead supporting Central mouldboard turn Side wing turn to the front Side wing turn to the back Hydraulic lift Scraper PRONAR PUU Cat. II three point hicth mm 975 mm rubber electro-hydraulic 12 or 24 V 12 or 24 V max 20 km/h wheels ± 30 plus 90 minus 60 Hydraulic lift 1275 kg

20 PRONAR SNOW PLOWS PRONAR PUV-2600M, PUV-2800M, PUV-3000M, PUV-3300M Number of working positions Steel cutting edges Shock absorption of the cutting edge Control Hydaulic power supply Electric power supply Clearance lights Power demand Skids Max height of moldboard eversion Plough wings steering angle 2600M 2800M 3000M 3300M Category 2 three-point hitch, swing suspension 2075/2205/ 2240/2370/ 2335 mm 2500 mm 4 Metal On springs 2395/2525/ 2655 mm 2570/2710/ 2845 mm from carrier MPa 12 V 10 km/h HP kg mm ± 33 ± Telescopic snow plow PRONAR PUT-S Working hight Cutting edges Control Electric power supply Skids Clearence lights With out Erich Jaeger connector Carrier loading capaticy 7-PIN accoding to ISO electic socket Hydraulic socket type ISO size 12,5 DIN TYPE A plate mm 1090 mm Metal-rubber- ceramic (combined) electro-hydraulic 24 V standard standard none max 60 km/h max 8 with 2 axes (or more) 1760 kg 3 or 4 PRONAR PU-S27HL / PU-S30HL / PU-S34HL PRONAR PUV-1400 & PRONAR PUV-1600 PU-S27HL PU-S30HL PU-S34HL mm -straight mm Maximum steering angle mm Max steering angle [± ] Working height mm Electric Power suuply V 12 lub lub lub 24 Carrier max. payload t kg Typ A lub B Typ A lub B Typ A lub B Category No. of working positions Cutting edges Power demand Control Shock absorbtion for the steel cutting edge Hydraulic power supply Electric power supply Clearance lights PRONAR PUV-1400 PRONAR PUV-1600 Category1 three-point Category I/ II rigid hitch, rigid type suspension L=P / max L=R / max mm 4 (possibility of mediate positions) Rubber Max. 30 HP electro-hydraulic from carrier no on springs MPa 12 V 10 km/h kg

21 PRONAR OTHERS Turning angle on a carrier Brush drive Two sockets of one section hydraulic divider standard Max. working oil pressure Brush recommended speed Brushing max. speed Recommended brush working speed Efficiency for recommended speed Electric power supply Main brush drive (med. hardness) Emptying dirt container Waste container capacity Working oil pressure Brushing roller recommended speed Brushing roller max. speed Recommended brushing speed Efficiency for recommended speed Sweeper PRONAR ZM-S mm ±30 Type A DIN mounting plate Hydraulic standard 16 MPa 160 rpm 200 rpm 8 km/h m2/h 24 or 12 V 420 kg PRONAR AGATA ZM1400 /ZM1600 /ZM2000 ZM1400 ZM1600 ZM2000 Categoty 1 or 2 three-point hitch short and narrow hydraulic engine hydraulic 1400 mm 1600 mm 2000 mm 180 dm³ 200 dm³ 250 dm³ MPa 100 rpm 130 rpm 6 km/h 8400 m²/h 250 kg m²/h kg Categoty 2 or 3 three-point hitch short and narrow m²/h kg Transport lenght Transport width Transport height Working height Horizontal shift of the mover(hydraulic shift) Minimum power demand Max. PTO rotation speer Flail shaft diameter Tracking shaft diameter Number of flail blades hammers [pcs.] Flail shaft rotation Speer [rpm] Working angle down/up A B Working range C D E PRONAR BBK-M series rear-side mulchers BBK160M BBK180M BBK200M mm 740 kg 50 HP 795 kg 60 HP 840 kg 70 HP 540 rpm Rear 3-point hitch cat II or III acording to ISO ø160 mm ø160 mm 14/28/48 16/32/48 18/36/ / mm 1620 mm 1610 mm mm 1840 mm 1830 mm mm 206 mm 2050 mm Load capacity Container capacity Spread width Container width Nominal pressure hydraulic oil Nominal oil required Electric power supply (from the control panel in operator s cab) Amount of salt spread Amount of aggregate spread adjustment Adjustable asymmetry variation Tractor s oil pump delivery rate required Self loading spreader PRONAR HZS kg 1 m³ 2,5-6 m Category 2 three-point hitch according to ISO mm 5-40 km/h 16 Mpa 60 l/min 12 V 5 to 40 g/m² 50 to 150 g/m² Stepless, independent of the driving speed From the control panel using electric e actuator 60 l/min 555 kg

22 PRONAR OTHERS OW 1.5 Max. total weight Load capacity Container capacity Spreading surface* Container internal lenght Container internal width Container height Distance from the base to the top edge of the box Suspension Max. towing eye load Tires Maximum speed Belt conveyor width No. of sprading adapter discs Max. spreading disc rate of rotation Spreading width Min. Tractor power demand [kw/hp] Hydraulic system pressure Tractor s hydraulic min. demand Spreaders PRONAR T130, T131, T132 T130 T131 T m³ 3 m³ 4 m³ 3,8 m² 4,4 m² 4,4 m² 2749 mm 3300 mm 3300 mm 1386 mm 1386 mm 1386 mm 625 mm 815 mm 815 mm 1670 mm 1950 mm 2270 mm Rigid 500kg 1000kg 1100 kg 11.5/ ,0/75-15,3 15/ km/h 800 mm 2 pcs 150* rpm /47,6 44/60 70/51 16 MPa 32 l/min Working height Blowing distance Efficiency Snail diameter Rotor diameter Power demand PTO range Snowblower PRONAR OW ,5 m 0,58 m 5-20 m 5-7 m³/min 320 mm 440 mm Category 1 and 2 three-point hitch HP rpm 320 kg OW 2.1 Working height Blowing distance Efficiency Snail diameter Rotor diameter Drive Oil demand Nominal pressure Power demand PTO range (on the front of the carrier, forward drive) Snowblower PRONAR OW 2.1 OW2.1M OW2.1H 2,1 m 0,78 m 5-30 m m³/min 340 mm 680 mm Category 2 and 3 three-point hitch hydraulic l/min 250 bar HP 540 left 1000 right rpm PTO range 540 left rpm (on the rear on the carrier, reverse Snowblower drive) PRONAR OW kg kg OW 2.4 Working height Blowing distance Efficiency Snail diameter Rotor diameter Drive Required oil demand Nominal pressure Power demand PTO range (on the front of the carrier, forward drive) PTO range (on the rear on the carrier, reverse drive) Snowblower PRONAR OW 2.4 OW2.4M OW2.4H 2,33 m 0,78 m 5-30 m m³/min 2 x 340 mm 680 mm Category 2 and 3 three-point hitch hydraulic feeder l/min 250 bar HP 740kg left 1000 right rpm 540 left rpm 830 kg

23 PRONAR OTHERS PRONAR round bale grapple 35CB 950 Bale diameter Width when opened Width when closed Height Length Nominal pressure <1,2 m 2,27 m 1,56 m 0,67 m 1,37 m 18,5 MPa 235 kg EURO / LC-1650 / SMS Pallet fork PRONAR WP-25E 690 Holder quality grade Lift capacity Height Width Length Tines length Steel tines adjustment range 3A acc. to ISO kg 0,66 m 1,2 m 1,39 m 1,2 m 226 kg (every 60 mm) EURO Rehuleikkuri PRONAR WP-25E 2300 Hitch Depth The volume of the cut block width cutting width Height after opening Height after closing opening height depth of cut Number of horizontal teeth nominal pressure EURO-SMS 580 kg 1,14 m 1 m³ 1,59 m 1,49 m 1,38 m 0,95 m 0,86 m 0,73 m 11+2 no. 18,5 Mpa Paalileikkuri PRONAR PB1.5EW 2900

24 PRONAR SR-Harvesting Oy