POLYTECH LHP 101 AGROMECHANICS LABORATORY AGM AM AGRICUTURAL MACHINERY SECTIONED MODELS AGM FA FARMING ACCESSORIES REAL COMPONENTS

Transcription

1 POLYTECH LHP 101 LABORATORY AGM AM AGRICUTURAL MACHINERY SECTIONED MODELS AGM FA FARMING ACCESSORIES REAL COMPONENTS

2 AGM AM - AGRICUTURAL MACHINERY SECTIONED MODELS The laboratory includes operational agrofarming equipment and sectioned models for soil culture, seeding and fertilization. 1. Motor cultivator An accurate section of a petrol motor cultivator, modern technology, with single-cylinder engine, air cooled, 6/10HP. The section intents to show every detail for training purposes. Is painted in different colors to distinguish its different parts. The unit is driven by a 220V reduction motor and is mounted on a wheeled frame. 2. Seeder sectioned An accurate section of a towed universal seeder. It is driven by an electric motor 220V. The motion is transmitted to the wheels thus giving the machine parts a perfect and real operation. It is offered mounted on a wheeled frame. 3. Manure spreaders sectioned The unit is an accurate educational section of the manure spreader. Includes: - cupping planting unit - centrifugal spreader with paw - spreader control The unit is driven by a 220V reduction motor and is mounted on a wheeled frame. 4. Cutaway model of a pulled manure spreader Shows in section the hopper, the spreader disk with spreading components (blades), the spread control unit and the conical gear mechanism. The unit is mounted on a wheeled support. 5. Fertilizer Unit sectioned, composes of fertilizer and two water irrigators of different type placed on suitable delivery pipes. The fertilizer is fully sectioned and includes pressure gauge, valves, rubber hoses etc. so as a real operation is reproduced. 6. Four-stroke diesel engine A detailed section of a Diesel engine used for agricultural purposes, so as to show all its internal parts and their operation. It is operated by hand crank. Air cooled, approx. 10HP, with injection pump, direct injection. It is offered on a base.

3 AGM AM - FARM TRACTOR TRAINER The Training system of farm tractor with sections of real components and machinery consists of: 7. Farm tractor with diesel engine sectioned It is suitably sectioned for training purposes. Various parts are painted in different colors so as to distinguish better all the parts. Has the following main technical features: 4-stroke, 2-cylinder engine indirect fuel injection water cooling system overhead valves in-line injection pump globe-shaped steering box speeds (gear box): the common tractor gearbox (forward-reverse) The unit is driven via a 220V reduction motor and runs at reduced speeds so as the operation of the various mechanical components can be easily observed. It is mounted on a strong wheeled frame. 8. Farm tractor transmission system It is a suitable section for training purposes. To show the most important parts such as: clutch unit, gearbox, steering clutch, reducer, gear. The system is operated manually through a crank handle and it is mounted on a wheeled base. 9. Hydro-pneumatic braking system Wall panel showing the hydro-pneumatic braking elements of a truck (tractor-trailer). It is complete with: air compressor, distributor with adjusting and control unit, pressure brake booster, tractor-trailer coupling, hydraulic control braking element, mechanical and air control braking element, servo-distributor valve for the trailer and four air reservoirs.

4 AGM AM - TRACTOR Frutteto 3 Natural 55/65/75/80.4 Features Frutteto 3 Natural offers extraordinary scope for configuration to cater for every specific need. Boasting a modern design, simplicity, affordable pricing and sturdy construction, the Frutteto 3 Natural is a tireless worker with impressible maneuverability. Technical Specifications FRUTTETO 3 natural Engine Engine type SDF Cylinders/Capacity 3/3000 n /cm³ 3/3000 n /cm³ 3/3000 n /cm³ 4/4000 n /cm³ Injection Turbo Intercooler Maximum power 40,5/55 kw/hp 45,6/62 kw/hp 53/72 kw/hp 55/75 kw/hp Engine speed at maximum power 1400 rpm 1600 rpm 1600 rpm 1600 rpm Maximum torque 213 Nm 240 Nm 265 Nm 285 Nm Fuel tank capacity Nominal Power (200/25/ SE) 65 L 45 (62) kw (HP) No. of cylinders 3 Max Torque Capacity Nominal rev. 265 Nm 3000 cu. Cm /min Rev in max torque 1600 Air filter Dry, dust trap Transmission and Brakes Type Drivetrain No. of gears - speeds Differential Type Rear differential lock Brakes Turning radius Synchronized mechanical shuttle 4x4 15F +15R with creeper Dual Standard - Mechanical oil Wet, disc type - Hydraulic 3,5 m MAX. SPEED Forwards Reverse 40 km/h Mechanical synchronized

5 AGM AM - TRACTOR Frutteto 3 Natural 55/65/75/80.4 FRUTTETO 3 natural Hydraulic System Rear lift Rear lift capacity Lifting Capacity Pump delivery Hydraulic distributors Mechanical 2700 Kg (narrow) / 3050 Kg (standard) 2700 Kg 42 L/min 4 ways (standard) / 6 ways (optional) Hydraulic outputs 4 Steering Hydraulic power steering Angle of turn 55 degrees PTO Type ( Type of clutch) Operation Revs 1/min Speed PTO engage Hydrostatic Mechanical Indepentant 540 ECO - Sychronized PTO 540 (standard) / 540/540Eco or 540/540Eco + Synchro (optional) Mechanical control Front Axle Activation Differentio locking Mechanically control Mechanically control Cab Cab Type of safety frame Safety frame bar Foldable Dimensions and weights Length (incl. 3-point hitch) Width Height Wheelbase Turning radius minimum -Tires Tire types Weight 3442 mm 1462 mm front / 1466mm back 2319 mm (to the top frame bar) 1996 mm 280/70 R16" front / 360/70 R24" rear Agri tires 2450 Kg

6 AGM FA - FARMING ACCESSORIES The farming accessories are composed of real components consisting of: 1 AGM FA 01 Rotary Tiller Total length (m) 1,4 Working width (m) 1,3 Weight (kg) 200 Knives number 24 Working depth (cm) 19 2 AGM FA 02 Plow Plow (cm) 2 x 20 each Frame (cm) 80 L x 20W Plowshare (mm) 20 Height (cm) 40 Working depth (cm) 25 3 AGM FA 03 Roller Tiller Type Light Roller Yes Length (m) 1,4 4 AGM FA 04 Sprayer Capacity (Lit) minimum 500 Arms 2 Working field (m) 10 5 AGM FA 05 Fertilize Spreader Capacity (Lit) 300 Working width (m) 10 Weight (kg) 50 6 AGM FA 06 Ridger Working width (mm) 1500 Cultivation rows 3 Ridging rows 2 Ridging space (mm) matched power (hp) 35 7 AGM FA 07 Farm Seeder Seed Feeding Rows 14 Working width (mm) 1800