Content. Introduction 6. Fiber types/terms and definitions 10. Testing procedure 22. Indoor cables 28. Universal cables 68.

Transcription

1

2 Content Introduction 6 Fiber tyes/terms and definitions 10 Testing rocedure 22 Indoor cables 28 Universal cables 68 Outdoor cables 98 Secial cables 114 Ordering information 140 Secial terms/glossary 166

3 6

4 Alication areas HUBER+SUHNER offers a range of different fiber otic cables, that are used in various alications. 1 On shis and offshore latforms 2 On railway infrastructures 3 In machinery and automation 4 In homes FTTH/FITH 5 In office buildings/lan 6 Cables for antennas (FTTA) 7 In wind turbines and wind farms 8 In technical building, ower lants and ower transmission stations 9 For mining and construction sites 10 In mobile vehicles and equiment 11 In central offices, data center

5 Secification singlemode fiber E9/125/245 μm Otical characteristics singlemode fiber Conditions E9/125 E9/125 A1 1) E9/125 A2 E9/125A3 Standards according ITU-T G.652.D G.657.A1 1) G.657.A2 G.657.A2/B3 Attenuation tyical (in cable) 1310 nm db/km nm db/km nm db/km nm db/km Attenuation maximum (in cable) 1310 nm db/km nm db/km nm db/km nm db/km Cable cut-off wavelength λ cc standard nm Chromatic disersion nm s/nm km nm s/nm km Zero disersion wavelength λ ο Zero disersion sloe S 0 at λ ο Polarization mode disersion link value s/ km individual s/ km Mode-field diameter 1310 nm μm 9.2 ± ± nm μm 10.3 ± ± Grou index of refraction tyical 1310 nm nm Macrobending loss r = 5.0 mm, 1 turn 1550 nm db nm db 0.45 Macrobending loss r = 7.5 mm, 1 turn 1550 nm db nm db Macrobending loss r = 10 mm, 1 turn 1550 nm db nm db Macrobending loss r = 15 mm, 10 turn 1550 nm db nm db Singlemode fibers used for reterminated indoor cable fulfils standard ITU-G.652.D and ITU-G.657.A1. 1) For cables with semi-tight and tight tubes: 1310 nm 0.40 db/km 1550 nm 0.30 db/km 1625 nm 0.50 db/km 8

6 Secification singlemode fiber Geometrical characteristics E9/125 E9/125 A1 E9/125 A2 E9/125 A3 Cladding diameter μm 125 ± 0.7 Coating diameter (uncoloured) μm 242 ± 7 Concentricity error core/cladding μm 0.5 Concentricity error cladding/coating μm 12.0 Cladding non-circularity % 0.7 Coating non-circularity % 5 Mechanical and environmental characteristics Coating-Material E9/125 E9/125 A1 E9/125 A2 E9/125 A3 acrylate Tensile roof test (fiber elongation 1 %) N (Ksi) 8.8 (100) Oeration temerature range 60 to 85 C Water immersion 23 C for 30 days 1310, 1550 and 1625 nm 1310, 1550 and 1625 nm db/km 0.05 db/km 0.05 Secifications Fiber class E9/125 E9/125 A1 E9/125 A2 E9/125 B3 Standards ITU-T G.652.D IEC Tye B1.3 DIN VDE 0888 Part 3 ITU-T G.657.A1 IEC Tye B6_a1 ITU-T G.657.A2 IEC Tye B6_a2 ITU-T G.657 B3 IEC Tye B6_b3 9

7 Secification multimode fiber G50/125/245 μm Otical characteristics multimode fiber Fiber class G50/125 OM2 OM3 OM4 OM5 Fiber class available by H+S standard F G H Bandwidth (overfilled launch) min. 850 nm MHz km nm MHz km Gigabit Ethernet 1000BASE SX 850 nm m LX 1300 nm m Gigabit Ethernet 10GBASE SX 850 nm m LX nm m Bending loss at 850/1300 nm r = 37.5 mm db 0.1/0.2 1) r = 15.0 mm db 0.1/0.3 1) r = 7.5 mm db 0.2/0.5 1) Attenuation tyical (in cable) 850 nm db/km nm db/km 0.5 Attenuation maximum (in cable) 850 nm db/km nm db/km 1.0 Effective grou index of refraction 850 nm nm Numerical aerture ± ) OM3 and OM4 BendOtimised is a HUBER+SUHNER standard 10

8 Secification multimode fiber Geometrical characteristics Fiber class G50/125 OM2 OM3 OM4 OM5 Core diameter μm 50 ± 2.5 Cladding diameter μm 125 ± 1 Coating diameter (uncoloured) μm 242 ± 10 Concentricity error core/cladding μm 1.0 Core non-circularity μm 5 Cladding non-circularity % 1 Coating non-circularity % 5 Mechanical and environmental characteristics Fiber class G50/125 OM2 OM3 OM4 OM5 Coating material acrylate Tensile roof test at fiber elongation 1 % N (Ksi) 8.8 (100) Temerature range max. 0.1 db/km 850/1300 nm C 60 to +85 Water immersion max. 0.2 db/km 850/1300 nm 23 C more than 30 days Secifications Fiber class G50/125 Standards 1) ITU-T G.651 IEC OM2 OM3 OM4 OM5 A1a.1a A1a.2b A1a.3b 1) The suffix "a" (A1a...) secifies fibers with traditional macrobund loss erformance levels; the suffix "b" (A1a...b) secifies fibers with enhanced macrobund loss erformance levels. 11

9 Secification multimode fiber G62.5/125/245 μm Otical characteristics multimode fiber Fiber class G62.5/125 OM1 OM2 Fiber class available by H+S standard D Bandwidth (overfilled launch) min. 850 nm MHz km nm MHz km Gigabit Ethernet 1000BASE SX 850 nm m LX 1300 nm m Attenuation tyical (in cable) 850 nm db/km nm db/km 0.5 Attenuation maximum (in cable) 850 nm db/km nm db/km 1.0 Effective grou index of refraction 850 nm nm Numerical aerture ±

10 Secification multimode fiber Geometrical characteristics Fiber class G62.5/125 OM1 Core diameter μm 62.5 ± 3 Cladding diameter μm 125 ± 2 Coating diameter (uncoloured) μm 245 ± 10 Concentricity error core/cladding μm 1.5 Core non-circularity μm 6 Cladding non-circularity % 1 Coating non-circularity % 6 OM2 Mechanical and environmental characteristics Fiber class G62.5/125 OM1 Coating material acrylate Tensile roof test at fiber elongation 1 % N (Ksi) 8.8 (100) Temerature range max. 0.1 db/km 850/1300 nm C 60 u to +85 Water immersion max. 0.2 db/km 850/1300 nm 23 C more than 30 days OM2 Secifications Fiber class Standards G62.5/125 OM1 IEC A1b OM2 13

11 Secification multimode fiber H200/230/500 μm Otical characteristics multimode ste index fiber (HCS) Fiber class H200/230/500 Bandwidth (overfilled launch) 850 nm MHz km 20 Attenuation tyical (in cable) 850 nm db/km 5 Attenuation maximum (in cable) 850 nm db/km 10 Numerical aerture 0.37 ± 0.02 Geometrical characteristics Fiber class H200/230/500 Core diameter μm 200 ± 4 Cladding diameter μm Coating diameter (uncoloured) μm 500 ± 30 Concentricity error core/cladding μm 5 Mechanical and environmental characteristics Fiber class H200/230/500 Coating-Material Tefzel Tensile roof test at a fiber elongation of 1 % N (Ksi) 13.2 (150) Oeration temerature range max. 0.1 db/km 850/1300 nm C 65 to +125 Secifications Fiber class Standards H200/230/500 IEC A3c 14

12 Terms and definitions CH-tube (semi-tight tube) without jelly 0.9 mm Standard tube for igtails tube Ø 0.9 mm coloured fiber 250 μm dry CW-tube (semi-tight tube) jelly-filled 0.9 mm Standard tube for simlex, dulex and breakout cables tube Ø 0.9 mm fiber 245 μm jelly filling Features Easiest striing u to 2 m No cleaning (jelly free) No memory effect High kink resistance Features Easiest striing u to 1 m Good thermal and mechanical features High flexibility Small bending radius F-tube (tight tube) 0.9 mm For various cable designs, e.g. riser, drag chain tube Ø 0.9 mm fiber 245 μm buffer layer Ø 400 μm Features Mechanically rugged Easy striing arox. 30 mm Wide temerature range V-tube (tight buffered tube) 0.6 mm coloured fiber 250 μm acrylate layer Ø 600 μm Features Easy striing arox. 30 mm Wide temerature range BQ Mini-multi-fiber loose tube, dry/jellyfree cable BW Mini-multi-fiber loose tube, jelly-filled tube Ø 2.2 mm dry 2 to 12 coloured fibers tube Ø 2.2 mm jelly 2 to 12 coloured fibers Q Multi-fiber loose tube, dry/jellyfree cable W Multi-fiber loose tube, jelly-filled tube Ø 2.8 mm dry 2 to 24 coloured fibers tube Ø 2.8 mm jelly 2 to 24 coloured fibers 15

13 Cable jacket materials Designation Polyolefine flame retardant Polyethylene Polyurethane flame retardant Polyurethane Polyvinylchloride Polybutylenterehtalate Abbreviation LSFH PVC LDPE HDPE PUR/TPU PUR/TPU PBT TPE HUBER+ SUHNER code H T Y V U Z N X Thermolastic elastomer Combustion roerties Halogen free yes no yes yes yes yes yes Flame retardant yes yes no yes no no no Smoke emission low strong medium medium strong strong medium Corrosive gases low high no low low no no Mechanical roerties Abrasion resistance low medium med. good good good good good Flexibility high high med. low high high low medium Hardness medium soft med. hard soft soft hard hard Resistance against Oil/fuel 1) Water good/ satisfactory good / satisfactory 2) satisfactory satisfactory good good good good/ good very good satisfactory good satisfactory satisfactory satisfactory 2) Weathering 3) good good very good good very good satisfactory good Information given in this table is based on lastic materials used for cable jackets. Proerties and resistance for cables cannot be derived from it. 1) This information is meant as decision guidance to the best of our today's knowledge, it is based on tyical values. The resistance of cables has to be verified due to the wide variety of oils and fuels. 2) Deending on the cable design different tyes of LSFH materials are used for the cable jacket. 3) The UV resistance deends highly on the colour of the lastic used, black offers the best resistance. 16

14 Colour codes Colour code for fiber according to standard Nummer Swisscom 1) DIN 2) ANSI/TIA-598 IEC 3) 1 red red blue blue 2 green green orange yellow 3 yellow blue green red 4 blue yellow brown white 5 white white gray green 6 violet gray white violet 7 orange brown red orange 8 black violet black gray 9 gray turquoise yellow turquoise 10 brown black violet black 11 heather violet orange heather violet brown 12 turquoise heather violet turquoise heather violet Multi fiber loose tube u to 24 fibers, fiber number 13 to 24 with black ring. Note: Orders of fiber otic cables with different fiber tyes (combination SM/MM): unless otherwise secified, the first colours of the colour code are assigned to the smaller fiber tye. Examle of a cable with 4xE9, 8xG50: red, green, yellow, blue = E9 fiber, remaining colours = G50 fiber Stranding according to Swisscom 4) Inscrition standard according to HUBER+SUHNER Multi-fiber loose tube elements xxxxxxxx zzzzzz/yy HUBER+SUHNER FIBEROPTIC. x m 1 red xxxxxxxx item number (8 digits) 2 green zzzzzz roduction number (7 digits) 3 white 1 yy roduction year 4 white amount of fibers fiber tye 5 white m consecutive numbering etc. dummies black Semi-tight tubes 0.9 mm according to HUBER+SUHNER 4) Single fiber cables according to HUBER+SUHNER 4) E9/125 5) yellow E9/125 yellow G50/125 orange G50/125 orange G62/125 blue G62/125 orange G50/125 OM3 turquoise G50/125 OM3 turquoise G50/125 OM4 heather violet G50/125 OM4 heather violet G50/125 OM5 lime green G50/125 OM5 lime green 1) H+S standard, unless otherwise secified 2) DIN VDE 0888 art 3 3) IEC ) Standard, unless otherwise secified 5) Low bend with black coloured fiber 17

15 HUBER+SUHNER cable code XXX total number of otical fibers in cable, always indicated with two or three digits to 24 otical fibers er multi-fiber loose tube E9/ singlemode fiber 9/125/245 μm E9A2/ E9A3/ E9S/ singlemode fiber low bend 9/125/245 μm A2 singlemode fiber low bend 9/125/245 μm A3 singlemode fiber 9/125/200 μm G50/ multimode fiber 50/125/250 μm G62/ multimode fiber 62.5/125/250 μm H200/ ste-index fiber HCS 200/230/500 μm G50/ E9/ F V CW CH W Q BW BQ MW MH CW BQ J SN J SN DN (ZN) (ZNG) (ZNG) tight tube 0.9 mm tight tube u to 0.6 mm semi-tight tube 0.9 mm, jelly-filled semi-tight tube 0.9 mm, dry multi-fiber loose tube, jelly-filled Ø 2.80 mm multi-fiber loose tube, jelly free dry block Ø 2.80 mm mini multi-fiber loose tube, jelly-filled Ø 2.20 mm mini multi-fiber loose tube, jelly free dry block Ø 2.20 mm micro multi-fiber loose tube, jelly-filled micro multi-fiber loose tube, jelly-free strain relief for each searate otical fiber central strength member, non-metallic de-centralized strength member, non-metallic strain-relief, non-metallic (aramide) A steel wire armouring glass roving for strain relief/rodent rotection H outer jacket material LSFH R beam crosslinked (RADOX ) I mica tae (flame barrier) K anti-termite N outer jacket material PA/PBT T outer jacket material PVC U outer jacket material PUR, flame retardant (FR) V outer jacket material PE (HD-PE) X outer jacket material TPE Y outer jacket material PE (LD-PE) Z outer jacket material PUR L anti rodent A outer jacket figure 0 H H M G XX xx F examle I examle II colour of outer jacket lease refer to cable colour chart diameter of the cable (1/10 mm) otions 1 to 5, see next age 18

16 HUBER+SUHNER cable code Rules For cables where each 0.6 or 0.9 mm tube is individually strain relieved (code = J), the termination diameter is secified. For cables where all tubes have a common strain relief (code = ZN or ZNG) the cable diameter is secified. By individual and common strain relief in the same cable, the termination diameter gets secified. The fiber colour is only indicated if not standard All otions follow the basic code : basic key 1st 2nd 3rd 4th otion The cable code has no saces Items not used are left out Fiber and cable colours A B C D E F G H I K L M N O P Q R S T U Z red green blue orange yellow white black grey brown violet heather violet turquoise light blue ochre-brown urle yellow-green olive-green lime green transarent nature (milky or beige) black with orange stries 1st otion: fiber class or bandwidth length-roduct MHz km, 850/1300 nm Standard without indication G50 OM2 G62 OM1 -D OM2: 500/500 -E OM2: 600/1200 -F OM3: 1500/500 -G OM4: 3500/500 -H OM5 classes lease see under section "Fiber tyes" 2nd otion: fiber colour -F fiber colours refer to fiber colour chard (1 to 12) -F G fiber colours with ring mating (13 to 24) 3rd otion: secial information -UN -UR -UP UL listed OFNG: General urose UL1685 UL listed OFNR: Riser cable UL1666 UL listed OFNP: Plenum cable UL910 4th otion: electrical elements (hybrid cable) +XX- C number of conductors resectively units electrical conductor, coer cords XX conductor cross section (1/10 mm 2 ) +02- C 15 examle 5th otion: CPR classification #B Mainclass B2ca #C Mainclass Cca #D Mainclass Dca #E Mainclass Eca #F Mainclass Fca 19

17 DIN/VDE 0888 cable code Alication A outdoor cable I indoor cable U universal cable AT breakout outdoor IT breakout indoor Tube tye V tight tube (acc. vde) H loose tube jellyfree and 1 fiber W loose tube with jelly and 1 fiber B loose tube jellyfree D loose tube with jelly Cable design Q dry and longitudinal watertight (ZN) strain-relief non-metallic (ZS) strain-relief with steel B glass roving strain-relief/anti rodent I mica tae/flame barrier W corrugated steel Jacket material H acc. LSFH (FRNC, LSOH etc.) 2Y PE, olyethylene 4Y PA, olyamide 11Y PUR, olyurethane, rubber-like e.g. for drag chain Quantity of fiber res. tube n amount of fiber n m amount of loose tube amount of fiber er tube Fiber tye E singlemode fiber (glass/glass) G multimode graded index fiber (glass/glass) S multimode ste index fiber (glass/glass) K PCF, multimode ste index fiber (glass/lastic) GK PCF, multimode graded index fiber (glass/lastic) P POF, lastic fiber (lastic/lastic) Core diameter μm diameter (e.g. 9, 50, 62.5, 200, ) Cladding diameter μm diameter (e.g. 125, 230,.) Attenuation db/km attenuation at wave length Wave length A 650 nm B 850 nm F 1300 nm H 1550 nm Bandwidth MHz km bandwidth with MM fibers (POF MHz 100 m) ns/km at SM fibers also s/nm km 20

18 Conformity and certificate RoHS conformity The HUBER+SUHNER comanies aim to comly with all relevant legal requirements at all time. This also holds true for the Euroean Union Directive 2011/65/EU restriction of the use of certain hazardous substances in electrical and electronic equiment commonly referred to as the Restriction of Hazardous Substances Directive or RoHS. We are roud to state that we are able to suly comonents fully comliant with the RoHS directive. This directive restricts the use of six hazardous materials: Lead (Pb), Mercury (Hg), Cadmium (Cd), hexavalent Chromium (Cr VI), and two tyes of brominated flame retardants, Polybrominated Bihenyls (PBB) and Polybrominated Dihenyl Ethers (PBDE) in the manufacture of various tyes of electronic and electrical equiment to reduce generation of toxic waste from discarded electrical and electronic equiment. ISO Certificate High-quality roducts and sulier relationshis have always been a to riority for HUBER+SUHNER. After having already been confirmed by the Swiss forerunner movement, the HUBER+SUHNER quality system was very soon acknowledged by the international ISO quality certificate. This much sought-after certificate according to ISO 9001, which must be earned over and over again, has been awarded to HUBER+SUHNER without interrution since The fact that HUBER+SUHNER is also reared to meet secific customer quality standards exceeding those of ISO 9001 is amly roved by a large number of successfully assed customer audits. 21

19 Test rocedures Tensile erformance Examines the behaviour of the attenuation and/or the fiber elongation strain as a function of the load on a cable design which may occur during installation (short term load or maximum secified load for the cable) and oeration (long term load). This method is intended to be non-destructive. Standards: IEC E1 (former IEC E1) Crush resistance Examines the ability of an otical fiber cable to withstand crushing (transverse comression load) for long term (oeration) and for short term (installation) loads. The load is uniformly alied on the cable samle. Standards: IEC E3 (former IEC E3) Imact Examines the ability of an otical fiber cable to withstand reeated imacts such as droing of tools or stones. Standards: IEC E4 (former IEC E4) Reeated bending Examines the ability of an otical fiber cable to withstand reeated bending. The stress occurs by reeated bending the cable back and forth by 90º. Standards: IEC E6 (former IEC E6) 22

20 Test rocedures Torsion Examines the ability of a fibre otic cable to withstand mechanical twisting. The rimary urose of this rocedure is to measure any variation in the otical ower transmittance of a fiber when the cable is subjected to external torsional forces. A secondary urose is to evaluate the ossibility of hysical damage that may occur as a result of such stresses. Standards: IEC E7 (former IEC E7) Cable bend Examines the ability of an otical fiber cable or cable element to withstand bending around a test mandrel. Standards: IEC E11 (former IEC E11) Kink Examines the minimum loo diameter at the onset of the kinking of an otical fiber cable. Standards: IEC E10 (former IEC E10) Coiling caability Shows the ability of a fiber otic cable to withstand winding and unwinding The urose is to measure variation of the otical ower transmittance of a fiber and to evaluate ossible hysical damage when the cable is wound and unwound on a reel. Standards: HUBER+SUHNER 23

21 Test rocedures Flexing Examines the ability of a fiber otic cable to withstand reeated flexing in service. The rimary urose of this rocedure is to measure any variation in the otical ower transmittance of a fiber when the cable is subjected to external bending and tensional forces. A secondary urose is to evaluate the ossibility of hysical damage that may occur as a result of such stresses. This is a secialized test intended for secific tyes of cable, such as elevator cable or the like. Standards: IEC E8 (former IEC E8) Temerature cycling (change) Long length cables Examines the stability behaviour of the attenuation of cables submitted to temerature changes. Test conditions for temerature-deendent measurements simulate the worst conditions. Standards : IEC F1 (former IEC F1) Short length cables (i.e. cables for atchcords) Examines the attenuation behaviour (change in attenuation) when otical fibre cables for use in atch cords are subjected to temerature cycling. Standard: IEC F12 (former IEC F12) (IEC ) Water enetration Examines the ability of a cable to block water migration along a secified length. Standards: IEC F5A/B/C (former IEC F5A/B) method A method B Ageing Examines the life-time behaviour of the attenuation of cables, or hysical attributes secified in the detail secification. Standards: IEC F10 (former IEC F10) 24

22 Test rocedures Fire roagation on a vertical single cable Cables for information transmission inside buildings installed on the surface of walls are a otential source for fire roagation. A 60 cm long cable is mounted vertically. The flame must extinguish itself and the fire damage must not reach the uer end of samle Standards: IEC (DIN VDE B) DIN VDE Fire roagation on a vertical cable bundle Deending on the volume of flammable material the cable bundles are fixed on a 3.5 m long ladder and a test flame is alied at the base during 20 minutes. The height of fire damage must not exceed 2.5 m. This simulates a simlified chimney effect in a cable duct. Cables which ass this test have a imroved characteristics regarding fire roagation. Standards: IEC (DIN VDE C) DIN VDE Teil Volumen an brennbaren Material [l/m] 22 (A) (B) (C) (D) Flammeneinwirkungszeit [min] Smoke emission In a defined test environment the cable is exosed to an oen fire of burning alcohol. The smoke density is determined with an otical transmission measurement. This test allows a statement of the exected line-of-sight obstruction in case of fire. Standards: IEC (DIN VDE ) DIN VDE Fire test with circuit integrity A test fire is alied horizontally from a distance of 60 cm to a single susended cable during a secified time. The test is assed when there was continuous circuit integrity and no extremely increased attenuation values during and after the test resectively. For instance FE 90 cables have endured at least 90 minutes, «FE» stands for flame exosure. This fire test shows the functional integrity duration (minutes) of a mechanically unloaded connection with a flame exosure of minimum 750 C in a dry environment. Standards: IEC DIN VDE

23 Test rocedures Measurement of the heat release and smoke roduction during the flame sread test The cable bundles will be secured to a 3.5 m ladder to suit the quantity of inflammable material. A test flame acts on the lower end of the cable samles for 20 minutes. The following arameters are measured: Smoke roduction Flaming drolets Heat release rate Total heat release Fire growth rate Flame sread The main class and arts of the additional classes are deendent on the measured arameters. Standard: EN Fire with shock, circuit integrity In addition to the fire test with circuit integrity, a test flame is alied to a secified test layout and the cable is exosed to mechanical imacts at regular intervals. This test simulates how many minutes a cable exosed to fire of at least 830 C and mechanical imacts kees minimum insulation efficiency (circuit integrity) in a dry environment. Standards: IEC (former IEC ) Corrosive fire gases and free of halogen Flammable materials are combusted at over 900 C. Resulting fire gases are washed out in water bottles and the corrosivness of this solution is determined by means of h-values and electric conductivity. Halogen free roducts contain hardly any elements of fluorine, chlorine, bromine or jodine. Materials containing halogen can release a considerable quantity of corrosive gases. These gases can cause consequential damage to the surrounding area as well as resiratory roblems. Standards: IEC / (former DIN EN / ) 26

24 Construction Products Regulation (CPR) The Construction Products Regulation 1) defines uniform classification for all cables ermanently installed within anytye of building or structure and regulates the conditions for the lacing or making available on the Euroean market. Class Classification / Test methods Additional classifications / Test methods Aca B1ca B2ca Cca Dca Heat of combustion (EN ISO 1716) Heat release, flame sread (EN 50399, EN ) Eca Flame sread (EN ) Fca does not meet Eca s1a s1b s1 s2 s3 Smoke roduction (EN 50399, EN ) d0 d1 d2 Flaming drolets (EN 50399) a1 a2 a3 Acidity (EN ) 1) Regulation (EN) No. 305/2011 of the Euroean Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction roducts and reealing Council Directive 89/106/EEC 27

25 ndoor cables Cable tye Page Ordering key Weight kg/km Number of fibers Semi-tight tubes 0.9 mm /CH Tight tubes 0.9 mm /F Tight tubes 0.6 mm /V-T Simlex /VJH /CW /CWJH /CWJH /CW Dulex figure 8 ( i cord) /VJH /F /CW /CWJH /CW Dulex figure /VJH-A /CWJH-A /CW ulex round / ( ) OtiPack /( ) /( ) /( ) /( ) - 36 Breakout 1.4 mm /VJSNH /VJSNH /VJSNH or 12 8 or Breakout 2.0 mm /CWJSNH /CWJSNH /CWJSNH /CWJSNH = assed 28

26 Tube Ø mm Ø Single fiber cable mm Jacket Ø mm Jacket material Direct connector assembly Tensile strength N Crush resis-tance N/dm Temerature range in service C Fire roagation IEC Fire roagation IEC CPR 2011/305/EU LSFH to TPE to acrylate to LSFH LSFH LSFH LSFH LSFH to to to to to +70 Dca-s1a, d0, a1 Dca-s1a, d0, a1 Dca-s1a, d0, a1 Dca-s1a, d0, a x x x x x 5.5 LSFH LSFH LSFH LSFH LSFH to to to to to +70 Dca-s1a, d0, a1 Dca-s1a, d0, a1 Dca-s1a, d0, a x LSFH LSFH LSFH to to to +70 Dca-s1a, d0, a1 Dca-s1a, d0, a LSFH to +70 Dca-s1a, d0, a " LSFH LSFH LSFH LSFH to to to to +70 Dca-s1a, d0, a1 Dca-s1a, d0, a1 Dca-s1a, d0, a1 Dca-s1a, d0, a LSFH LSFH LSFH to to to +70 Dca-s2a, d2, a1 Dca-s1a, d2, a1 CCa-s1a, d1, a LSFH LSFH LSFH LSFH to to to to +70 Dca-s1a, d0, a1 Cca-s1a, d2, a1 Cca-s1a, d2, a1 Cca-s1a, d1, a1 29

27 ndoor cables (continuance) Cable tye Page Ordering key Weight kg/km Number of fibers Fire resistant breakout 2.0 mm /CWJSNHIH /CWJSNHIH /CWJSNHIH Oti ack breakout /48- /( ) /( ) /( ) /( ) - 20 Oti ack breakout /96- /( ) /( ) /( ) / / Riser /F ( ) /F ( ) /F ( ) FTTH simlex /CW FG 7 1 FTT icrotube / ( ) FTT indoor / ( ) FTT indoor HOMESTAR /F( ) /F ( ) /F ( ) = assed 30

28 Tube Ø mm Ø Single fiber cable mm Jacket Ø mm Jacket material Direct connector assembly Tensile strength N Crush resistance N/dm Temerature range in service C Fire roagation IEC Fire roagation IEC CPR 2011/305/EU LSFH LSFH LSFH to to to LSFH LSFH LSFH LSFH to to to to LSFH LSFH LSFH to to to LSFH LSFH LSFH to to to +70 Dca-s2a, d0, a LSFH to +70 Dca-s1a, d0, a1 2.3 LSFH to +70 Dca-s1a, d0, a LSFH to +70 Dca-s1a, d0, a LSFH LSFH LSFH to to to

29 Semi-tight tubes 0.9 mm Proerties etal free indoor cable For direct connector assembly Tube can be stried u to 2 m in one iece Tight bending radii High flexibility alogen free and non-corrosi e fire gases acket material according to 94-0 Jelly free, dry Alications igtail assemblies for fusion or mechanical slicing within distribution frames and termination boxes ini atch cables within rotected enclosures For termination with assi e otical comonents such as connectors Design Tube coloured fiber in dry tube ( elly free) Tube material halogen free ( F ) Tube colour E9 yellow G50 - O 2 orange G50 - O 3 tur uoise G50 - O 4 heather iolet G50 O 5 lime green G O 1 blue other colours on re uest ccording to C Ordering information /CH-...9 Please see age

30 Semi-tight tubes 0.9 mm Secification Semi-tight tube dry Tube Ø mm 0.9 rox. weight kg/km 0.8 Mechanical roerties Tensile strength during installation N 20 C in ser ice N 10 in. bend radius 1) during installation mm 25 C in ser ice mm 25 Crush resistance short-term N/dm 1000 C long-term N/dm 500 mact resistance W 0.74 imacts 3 C ink resistance r 5 mm assed C Torsion 360 length 1000 mm F 5 cycles 3 C Thermal roerties Temerature range during installation C 10 to +50 C F12 in ser ice C 25 to +75 in storage C 40 to +75 Combustion roerties Fire load MJ/m /65/ C ( o ) comliant 1) maller bending radius are ossible with 9/125 owbend ( T G.657) and G50/125-O 3/O 4 BendOtimi ed. 33

31 Tight tubes 0.9 mm Proerties etal free indoor cable For direct connector assembly Tube can be stried u to 30 mm in one iece Tight bending radii For high mechanical and thermal stability alogen free and non-corrosi e fire gases mro ed crush resistance Alications atch cable within distribution frames and termination boxes n thermally and mechanically critical en ironments For mobile or flexible systems Design Tube buffer layer on fiber Tube material halogen free (T ) Tube colour E9 yellow G50 O 2 orange G50 O 3 tur uoise G50 O 4 heather iolet G50 O 5 lime green G62.5 O 1 blue other colours on re uest ccording to C Ordering information /F-...9 Please see age

32 Tight tubes 0.9 mm Secification Tight tube Tube Ø mm 0.9 rox. weight kg/km 0.8 Mechanical roerties Tensile strength during installation (r 25 mm) N 20 C in ser ice (r 25 mm) N 10 in. bend radius 1) during installation mm 25 C in ser ice mm 25 Crush resistance short-term N/dm 1000 C long-term N/dm 500 mact resistance W 0.74 r 25 mm imacts 100 C Torsion 7200 length 1000 mm F 5 cycles 3 C Thermal roerties Temerature range during installation C 10 to +60 C F12 in ser ice C 40 to +85 in storage C 40 to +60 Combustion roerties Fire load MJ/m /65/ C ( o ) comliant 1) maller bending radius are ossible with 9/125 owbend ( T G.657) and G50/125-O 3/O 4 BendOtimi ed. 35

33 Tight tubes 0.6 mm Proerties etal free indoor cable For direct connector assembly Tube can be stried u to 30 mm in one iece Tight bending radii For high thermal stability alogen free and non-corrosi e fire gases Alications ata cable in distribution network FTT nstallation in indoor area Design Tube coloured fiber with a transarent buffer layer Tube material acrylat Tube colour E9 yellow G50 O 2 orange G50 O 3 tur uoise G50 O 4 heather iolet G50 O 5 lime green G62.5 O 1 blue other colours on re uest ccording to C Ordering information /V-T6-... Please see age

34 Tight tubes 0.6 mm Secification Tight tube Tube Ø mm 0.6 rox. weight kg/km 0.3 Mechanical roerties Tensile strength during installation N 20 C in ser ice N 10 in. bend radius 1) during installation mm 25 C in ser ice mm 25 Crush resistance short-term N/dm 500 C long-term N/dm 250 Thermal roerties Temerature range during installation C 10 to +60 C F12 in ser ice C 40 to +85 in storage C 40 to +60 Combustion roerties Fire load MJ/m /65/ C ( o ) comliant 1) maller bending radius are ossible with 9/125 owbend ( T G.657) and G50/125-O 3/O 4 BendOtimi ed. 37

35 Simlex cables Proerties etal free indoor cable ach fiber strain relie ed For direct connector assembly with strain relief Tight bending radii High flexibility alogen free and non-corrosi e fire gases acket material according to 94-0 ow fire load for high safety re uirements Alications atch cables for data centers nstallation in indoor area easurement cable withstanding mechanical loading ata cable in distribution centres train-relie ed igtail deal for alications in ol ing safety re uirements in case of fire Design Tube train relief tight buffered tube 0.6 mm stried u to 30 mm semi-tight tubes 0.9 mm stried u to 1 m aramide yarn Jacket material LSFH Tube colour E9 yellow G50 O 2 G50 O 3 G50 O 4 G50 O 5 orange tur uoise heather iolet lime green G62.5 O 1 orange ccording to C Ordering information /VJH /CW /CWJH /CWJH /CW Please see age

36 Simlex cables Secification Jacket Ø mm Tube Ø mm rox weight kg/km Mechanical roerties Tensile strength during installation N C in ser ice N in. bend radius 1) during installation mm C in ser ice mm Crush resistance short-term N/dm C mact resistance long-term N/dm W 0.5 W 0.74 W = 1.0 J imacts C eeated bending r 25 mm cycles C Thermal roerties Temerature range during installation C 10 to to to to to +50 C F12 in ser ice C 25 to to to to to +70 in storage C 40 to to to to to +70 Combustion roerties Fire load MJ/m Fire roagation on ertical single cable on ertical cable bundle IEC C moke density IEC alogen acid gas acket material C egree of acidity acket material C /65/ C ( o ) comliant ( ) o 305/2011 (C ) Dca-s1a, d0, a = assed 1) maller bending radius are ossible with 9/125 owbend ( T G.657) and G50/125-O 3/O 4 BendOtimi ed. 39

37 ulex figure 8 ( i cord) Proerties etal free indoor cable ach fiber strain relie ed For direct connector assembly with strain relief Tight bending radii For high thermal stability alogen free and non-corrosi e fire gases acket material according to 94-0 ow fire load for high safety re uirements Alications nstallation in indoor area atch cable in distribution centres ata cable in distribution networks deal for alications in ol ing safety re uirements in case of fire Design Tube train relief 2 semi-tight tubes 0.9 mm 2 tight tubes 0.6 mm/0.9 mm aramide yarn Jacket material LSFH Tube colour E9 yellow G50 O 2 G50 O 3 G50 O 4 G50 O 5 orange tur uoise heather iolet lime green G62.5 O 1 orange ccording to C Ordering information /VJH /F /CW /CWJH /CW Please see age 142,

38 ulex figure 8 ( i cord) Secification Jacket Ø mm 1.4 x x x x x 5.5 ingle fiber cable mm Tube Ø mm 0.6 tight 0.9 tight 0.9 semi-tight 0.9 semi-tight 0.9 semi-tight Channel marking on single fiber rox weight kg/km inscrition on one side Mechanical roerties Tensile strength during installation N C in ser ice N in. bend radius 1) during installation mm C in ser ice mm Crush resistance short-term N/dm C mact resistance Reeated bending long-term N/dm W 0.74 W = 1.0 J r 25 mm weight 0.5 kg imacts C cycles C Thermal roerties Temerature range during installation C 10 to to to to to +50 C F1 in ser ice C 25 to to to to to +70 in storage C 40 to to to to to +70 Combustion roerties Fire load MJ/m Fire roagation alogen acid gas on a ertical single cable on a ertical cable bundle IEC C acket material C egree of acidity acket material C /65/ C ( o ) comliant ( ) o 305/2011 (C ) Dca-s1a, d0, a = assed 1) maller bending radius are ossible with 9/125 owbend ( T G.657) and G50/125-O 3/O 4 BendOtimi ed 41

39 Dulex cables figure 0 Proerties etal free indoor cable ach fiber strain relie ed For direct connector assembly with strain relief Tight bending radii ow fire load for high safety re uirements acket material according to 94-0 alogen free and non-corrosi e fire gases Alications nstallation in indoor area atch cable in distribution centres ata cable in distribution networks deal for alications in ol ing safety re uirements in case of fire Design Tube train relief 2 simlex cables with semi-tight tubes 0.9 mm 2 simlex cables with tight tubes 0.6 mm aramide yarn Jacket material LSFH Tube colour E9 yellow ccording to C G50 O 2 G50 O 3 G50 O 4 G50 O 5 orange tur uoise heather iolet lime green G62.5 O 1 orange Ordering information /VJH-A /CWJH-A /CW Please see age

40 Dulex cables figure 0 Secification Jacket Ø mm ingle fiber cable mm Tube Ø mm 0.6 tight 0.9 semi-tight 0.9 semi-tight Channel marking on single cable numbered numbered coloured rox. weight kg/km Mechanical roerties Tensile strength during installation N C in ser ice N in. bend radius 1) during installation mm C in ser ice mm Crush resistance short-term N/dm C long-term N/dm mact resistance W = 1.0 J imacts C eeated bending r 25 mm weight 0.5 kg cycles C Thermal roerties Temerature range during installation C 10 to to to +50 C F12 in ser ice C 25 to to to +70 in storage C 25 to to to +70 Combustion roerties Fire load MJ/m Fire roagation on a ertical single cable IEC on a ertical cable bundle C alogen acid gas acket material C egree of acidity acket material C /65/ C ( o ) comliant ( ) o 305/2011 (C ) Dca-s1a, d0, a = assed 1) maller bending radius are ossible with 9/125 owbend ( T G.657) and G50/125-O 3/O 4 BendOtimi ed. 43

41 ulex round cables ( C uniboot comatible) Proerties etal free indoor cable train relie e with aramide yarn For direct connector assembly Tight bending radii High flexibility ow smoke halogen free and self-extinguishing acket material according to 94-0 C niboot comatible Alications atch cables for data centers ulex cable for C niboot Design Tube 2 tight buffered tubes 0.6 mm train relief aramide yarn Jacket material LSFH Tube colour 9 low bend yellow G50 O 3 tur uoise G50 O 4 heather iolet G50 O 5 lime green ccording to C Ordering information / ( ) Please see age

42 ulex round cables ( C uniboot comatible) Secification Jacket Ø mm 2.1 Tube Ø mm 0.6 tight rox. weight kg/km 4.3 Mechanical roerties Tensile strength during installation N 200 C in ser ice N 100 in. bend radius during installation mm 15 C in ser ice mm 10 Crush resistance short-term N/dm 5000 C long-term N/dm 900 ink resistance radius 3 mm C Thermal roerties Temerature range during installation C 10 to +50 C F1 in ser ice C 25 to +70 in storage C 25 to +70 Combustion roerties Fire load MJ/m 0.11 Fire roagation on a ertical single cable IEC on a ertical cable bundle C alogen acid gas acket material C egree of acidity acket material C /65/ C ( o ) comliant ( ) o 305/2011 (C ) Dca-s1a, d0, a = assed 45

43 Otiack cable with 8 12 and 24 fibers Proerties etal free indoor cable train relief with aramide yarn For direct connector assembly with strain relief Tight bending radii ow smoke halogen free and self-extinguishing Otimi ed outer-diameter construction uggedi ed and non-ruggedi ed cable construction Alications data center Fits multi fiber connectors (as O/ T ) Design train relief aramide yarn Jacket material LSFH Tube colour 9 low bend yellow G50 O 3 tur uoise G50 O 4 heather iolet G50 - O 5 lime green ccording to C Ordering information 08- /( ) /( ) /( ) /( ) /( ) /( ) - 36 Please see age

44 Otiack cable with 8 12 and 24 fibers Secification Tye on-ruggedi ed uggedi ed o. of fibers fibers 8 and and 12 Jacket Ø mm rox weight kg/km Mechanical roerties Tensile strength during installation N C in ser ice N in. bend radius during installation mm C in ser ice mm Crush resistance during installation N/dm C in ser ice N/dm mact resistance W C W=1.0J imacts ink resistance r 5mm C Thermal roerties Temerature range during installation C 10 to to to to +50 C F12 in ser ice C 10 to to to to +70 in storage C 20 to to to to +70 Combustion roerties Fire load MJ/m Fire roagation on a ertical single cable IEC on a ertical cable bundle C moke density IEC alogen acid gas acket material C egree of acidity acket material C /65/ C ( o ) comliant ( ) o 305/2011 (C ) Dca-s1a, d0, a = assed 47

45 Breakout cables 1.4 mm Proerties etal free indoor cable ach fiber strain relie ed For direct connector assembly with strain relie ed icord for easy acket remo al ow smoke halogen free and self-extinguishing Otimi ed outer-diameter construction Alications nstallation in indoor areas ata cable in distribution networks For installations in cable ducts For hori ontal and collased backbone cabling Terminations ossible for FF connectors only Design Cable design central strength member non-metallic 12 to 24 single fiber cables with tight buffered tube 0.6 mm strain relief (aramide yarn) searating tae and 1 ricord Channel marketing Jacket material single fiber cable numbered LSFH Tube/ acket colour E9 yellow ccording to C G50 O 3 G50 O 4 G50 O 5 tur uoise heather iolet lime green G62.5 O 1 orange Ordering information /VJSNH /VJSNH /VJSNH Please see age

46 Breakout cables 1.4 mm Secification Jacket Ø mm ingle fiber cable mm numbered Tube Ø mm rox. weight kg/km Mechanical roerties Tensile strength during installation N C in ser ice N in. bend radius during installation mm C in ser ice mm Crush resistance short-term N/dm C long-term N/dm mact resistance W = 2.21 J imacts C eeated bending r = 100 mm r = 200 mm cycles C Thermal roerties Temerature range during installation C 10 to +60 C F1 in ser ice C 25 to +70 in storage C 25 to +70 Combustion roerties Fire load MJ/m Fire roagation on a ertical single cable IEC on a ertical cable bundle C moke density IEC alogen acid gas acket material C egree of acidity acket material C /65/ C ( o ) comliant comliant comliant ( ) o 305/2011 (C ) * ** *** = assed * Dca-s2, d2, a1 ** Dca-s1a, d2, a1 *** Cca-s1a, d0, a1 49

47 Breakout cables 2.0 mm Proerties etal free indoor cable ach fiber strain relie ed For direct connector assembly with strain relief icord for easy acket remo al ow smoke halogen free and self-extinguishing Cable with imro ed fire erformance Alications nstallation in indoor areas ata cable in distribution networks For installation in cable ducts eal for alications in ol ing high safety re uirements in case of fire For hori ontal and collased backbone cabling Design Cable design Channel marketing Jacket material central strengh member non-metallic 4 to 24 single fiber cables with semi-tight tubes strain relief (aramide yarn) searating tae and 1 ricord single fiber cable numbered LSFH Tube/ acket colour E9 yellow G50 O 2 G50 O 3 G50 O 4 G50 O 5 orange tur uoise heather iolet lime green G62.5 O 1 orange ccording to C Ordering information /CWJSNH /CWJSNH /CWJSNH /CWJSNH Please see age 145. Arovals G Tye aro ed Certificate o. T

48 Breakout cables 2.0 mm Secification Jacket Ø mm ingle fiber cable mm numbered Tube Ø mm rox. weight kg/km Mechanical roerties Tensile strength during installation N C in ser ice N in. bend radius during installation mm C in ser ice mm Crush resistance short-term N/dm C long-term N/dm mact resistance W 2.21 r 25 mm imacts C Torsion ± 360, l = 1000 mm m = 2 kg cycles C Thermal roerties Temerature range during installation C 10 to +60 C F12 in ser ice C 25 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m Fire roagation on a ertical single cable IEC on a ertical cable bundle IEC moke density IEC alogen acid gas acket material C egree of acidity acket material C /65/ C ( o ) comliant ( ) o 305/2011 (C ) * ** ** *** = assed * Dca-s1a, d0, a1 ** Dca-s1a, d2, a1 *** Cca-s1a, d1, a1 51

49 Fire resistant breakout cables 2.0 mm Proerties etal free indoor cable ach fiber strain relie ed For direct connector assembly with strain relief icord for easy acket remo al ow smoke halogen free and self-extinguishing Cable with imro ed fire erformance Alications nstallation in indoor areas ata cable in distribution networks For installation in cable ducts deal for alications in ol ing high safety re uirements in case of fire For hori ontal and collased backbone cabling Design Cable design Channel marketing Jacket material central strengh member non-metallic 4 to 12 single fiber cables with semi-tight tubes strain relief (aramide yarn) searating tae and 1 ricord single fiber cable numbred F double acket with flame barrier Tube/ acket colour E9 yellow G50 O 2 G50 O 3 G50 O 4 G50 O 5 orange tur uoise heather iolet lime green G62.5 O 1 orange ccording to C Ordering information /CWJSNHIH /CWJSNHIH /CWJSNHIH Please see age 145. Arovals G Tye aro ed Certificate o. T

50 Fire resistant breakout cables 2.0 mm Secification Jacket Ø mm ingle fiber cable mm numbered Tube Ø mm rox. weight kg/km Mechanical roerties Tensile strength during installation N C in ser ice N in. bend radius during installation mm C in ser ice mm Crush resistance short-term N/dm C long-term N/dm mact resistance W 2.21 r 25 mm imacts C eeated bending r = 100 mm cycles C Thermal roerties Temerature range during installation C 10 to +60 C F12 in ser ice C 25 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m Fire roagation on a ertical single cable IEC on a ertical cable bundle IEC Fire test with circuit integrity (C ) min C Fire test with circuit integrity (C ) with shock min IEC moke density IEC alogen acid gas acket material C egree of acidity acket material C /65/ C ( o ) = assed comliant 53

51 Otiack breakout cables with 16 to144 fibers Proerties ingle tubes with 8 or12 fibers etal free indoor cable train relie ed with aramide yarn icord for easy acket remo al ow smoke halogen free and self-extinguishing Cable with imro ed fire erformance Alications nstallation in indoor areas ata center in distribution networks deal for alications in ol ing high safety re uirements in case of fire For hori ontal and collased backbone cabling Fits multi fiber connectors ( O/ T ) Design Cable design Jacket material LSFH Channel marketing central strength member non-metallic 16 to 144 otical fibers strain relief (aramide yarn) searating tae and 1 ricord single fiber cable numbered Tube/ acket colour 9 low bend yellow G50 O 3 G50 O 4 G50 O 5 tur uoise heather iolet lime green ccording to C Ordering information 16-8 /( ) /( ) /( ) /( ) /( ) /( ) /( ) /( ) /( ) /( ) - 20 Please see age

52 Otiack breakout cables with 16 to144 fibers Secification ingle cable fiber count 8 fiber 16/ fiber 24/ Jacket Ø mm ingle cable mm numbered rox. Weight kg/km Mechanical roerties Tensile strength during installation N C in ser ice N 4 x x x x 100 in. bend radius during installation mm C in ser ice mm Crush resistance during installation N/dm C in ser ice N/dm mact resistance W=1.0J imacts C ink resistance r=20mm r 25mm C Thermal roerties Temerature range during installation C 10 to to to to +50 C F12 in ser ice C 10 to to to to +70 in storage C 20 to to to to +70 Combustion roerties Fire load MJ/m Fire roagation on a ertical single cable on a ertical cable bundle IEC C moke density IEC alogen acid gas acket material C egree of acidity acket material C /65/ C ( o ) comliant ( ) o 305/2011 (C ) classes on re uest = assed 55

53 Otiack breakout cables with 48 to 288 fibers Proerties ingle tubes with 24 fibers etal free indoor cable train relie ed with aramide yarn icord for easy acket remo al ow smoke halogen free and self-extinguishing Cable with imro ed fire erformance Alications nstallation in indoor areas ata cable in distribution networks deal for alications in ol ing high safety re uirements in case of fire For hori ontal and collased backbone cabling Fits multi fiber connectors ( O/ T ) Design Cable design Jacket material LSFH Channel marketing central strength member non-metallic 48 to 288 otical fibers strain relief (aramide yarn) searating tae and 1 ricord single fiber cable numbred Tube/ acket colour 9 low bend yellow G50 O 3 G50 O 4 G50 O 5 tur uoise heather iolet lime green ccording to C Ordering information /( ) /( ) /( ) - 30 Please see age

54 Otiack breakout cables with 48 to 288 fibers Secification ingle cable fiber count Jacket Ø mm ingle cable mm numbered rox. Weight kg/km Mechanical roerties Tensile strength during installation N C in ser ice N 4 x x x 100 in. bend radius during installation mm C in ser ice mm Crush resistance during installation N/dm C in ser ice N/dm mact resistance W=1.0J imacts C ink resistance r 25mm C Thermal roerties Temerature range during installation C 10 to to to +50 C F12 in ser ice C 10 to to to +70 in storage C 20 to to to +70 Combustion roerties Fire load MJ/m Fire roagation on a ertical single cable IEC on a ertical cable bundle C moke density IEC alogen acid gas acket material C egree of acidity acket material C /65/ C ( o ) comliant ( ) o 305/2011 (C ) classes on re uest = assed 57

55 iser cables (distribution cables) Proerties etal free indoor cable train relief with aramide yarn For direct connector assembly icord for easy acket remo al For high mechanical and thermal stability ow smoke halogen free and self-extinguishing Alications nternal building distribution ising one/ lications with high safety re uirements For hori ontal and collased backbone cabling Design Cable design Tube colour Jacket material Outer acket colour central strengh member non-metallic 4 to 24 tight tube fibers strain relief (aramide yarn) 1 ricord according to colour code LSFH black ccording to C Ordering information /F ( ) /F ( ) /F ( ) Please see age

56 iser cables (distribution cables) Secification fiber Jacket Ø mm Tube Ø mm coloured rox. weight kg/km Mechanical roerties Tensile strength during installation N C in ser ice N in. bend radius 1) during installation mm C in ser ice mm Crush resistance short-term N/dm C long-term N/dm mact resistance W = 2.21 J imacts C eeated bending r 50 mm cycles C Thermal roerties Temerature range during installation C 10 to +50 C F1 in ser ice C 20 to +70 in storage C 25 to +70 Combustion roerties Fire load MJ/m Fire roagation on a ertical single cable IEC on a ertical cable bundle IEC moke density IEC alogen acid gas acket material C egree of acidity acket material C /65/ C ( o ) comliant ( ) o 305/2011 (C ) Dca-s2, d0, a = assed 1) maller bending radius are ossible with 9/125 owbend ( T G.657) and G50/125-O 3/O 4 BendOtimi ed. 59

57 FTT simlex indoor cables Proerties etal free indoor cable train relief with aramide yarn Tube can be stried u to 1 m in one iece For direct connector assembly Tight bending radii ow smoke halogen free and non-corrosi e acket material according to 94-0 Alications ata cable in distribution network FTT nstallation in indoor areas For hori ontal and collased backbone cabling Design Cable design 1 semi-tight tube train relief aramide yarn Jacket material LSFH acket colour white/grey ccording to C Ordering information /CW FG Please see age

58 FTT simlex indoor cables Secification Jacket Ø mm 2.7 Tube Ø mm 0.9 rox. weight kg/km 7.0 Mechanical roerties Tensile strength during installation N 400 C in ser ice N 200 in. bend radius 1) during installation mm 50 C in ser ice mm 25 Crush resistance short-term N/dm 7000 C long-term N/dm 5000 mact resistance W = 1.0 J imacts 20 C eeated bending r 25 mm cycles 5000 C Thermal roerties Temerature range during installation C 10 to +50 C F12 in ser ice C 25 to +70 in storage C 25 to +70 Combustion roerties Fire load MJ/m 0.17 Fire roagation on a ertical single cable IEC on a ertical cable bundle C alogen acid gas acket material C egree of acidity acket material C /65/ C ( o ) comliant ( ) o 305/2011 (C ) Dca-s1a, d0, a = assed 1) maller bending radius are ossible with 9/125 owbend ( T G.657) and G50/125-O 3/O 4 BendOtimi ed. 61

59 FTT icrotube Proerties etal free indoor cable train relie ed with aramide yarn icord for easy acket remo al o need for cleaning the fibers ( elly free) Tight bending radii alogen free and non-corrosi e fire gases acket material according to 94-0 asy striing Alications ata cable in distribution network FTT nstallation in indoor areas For hori ontal and collased backbone cabling Design Cable design icrotube dry with 4 fibers train relief aramide yarn Jacket material LSFH acket colour white/grey/yellow ccording to C Ordering information / ( ) Please see age

60 FTT icrotube Secification umber of fibers 4 Jacket Ø mm 2.3 rox. weight kg/km 5.2 Mechanical roerties Tensile strength during installation N 400 C in ser ice N 200 in. bend radius during installation mm 10 C in ser ice mm 10 Crush resistance short-term N/dm 1000 C long-term N/dm 500 mact resistance W = 1 J imacts 3 C ink resistance r 5 mm C Thermal roerties Temerature range during installation C 5 to +50 C F1 in ser ice C 10 to +60 in storage C 20 to +70 Combustion roerties Fire load MJ/m 0.09 Fire roagation on a ertical single calbe on a ertical calbe bundle IEC C moke density IEC alogen acid gas acket material C egree of acidity acket material C /65/ C ( o ) comliant ( ) o 305/2011 (C ) Dca-s1a, d0, a = assed 63

61 FTT indoor cables with tight tubes 0.6 mm Proerties etal free indoor and outdoor cable train relie ed with aramide yarn For direct connector assembly Tight bending radii alogen free and non-corrosi e fire gases Otimi ed outer-diameter construction Alications ata cable in distribution network FTT nstallation in indoor areas For hori ontal and collased backbone cabling Design Cable design 4 tight tubes buffered 0.6 mm easy striing train relief aramide yarn Jacket material LSFH acket colour grey ccording to C Ordering information / ( ) Please see age

62 FTT indoor cables with tight tubes 0.6 mm Secification umber of fibers mm 4 Jacket Ø 2.8 Tube Ø mm 0.6 easy striing/coloured rox. weight kg/km 8 Mechanical roerties Tensile strength during installation N 400 C in ser ice N 200 in. bend radius during installation mm 7.5 C in ser ice mm 7.5 Crush resistance short-term N/dm 2000 C long-term N/dm 1000 mact resistance W = 1 J imacts 5 C eeated bending r = 30 mm cycles 5000 C ink resistance r = 6 mm cycles C Coiling caability length 100 m/r 70 mm cycles 3 HUBER+SUHNER Thermal roerties Temerature range during installation C 20 to +70 C F1 in ser ice C 40 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m 0.19 Fire roagation on a ertical single cable IEC moke density IEC alogen acid gas acket material C egree of acidity acket material C /65/ C ( o ) comliant ( ) o 305/2011 (C ) Dca-s1a, d0, a = assed 65

63 FTT indoor cables O T Proerties etal free indoor and outdoor cable train relie ed with aramide yarn For direct connector assembly Tight bending radii ow smoke halogenfree and self-extinguishing Alications ata cable in distribution network FTT nstallation in indoor areas For hori ontal and collased backbone cabling Design Cable design train relief central strength member non-metallic 1 2 to 4 tight buffered tubes aramide yarn Jacket material LSFH acket colour grey ccording to C Ordering information /F( ) /F ( ) /F ( ) Please see age

64 FTT indoor cables O T Secification umber of fibers Jacket Ø mm Tube Ø mm coloured rox. weight kg/km Mechanical roerties Tensile strength during installation N C in ser ice N in. bend radius during installation mm C in ser ice mm Crush resistance short-term N/dm C long-term N/dm mact resistance W = 2.21 J imacts C eeated bending r = 30 mm cycles C ink resistance r 7.5 mm C Torsion angle 360 / length 500 mm + Crush resistance short-term long-term cycles C /5 mm /5 mm HUBER+SUHNER Thermal roerties Temerature range during installation C 10 to +50 C F1 in ser ice C 25 to +70 in storage C 25 to +70 Combustion roerties Fire load MJ/m Fire roagation on a ertical single cable IEC moke density IEC alogen acid gas acket material C egree of acidity acket material C /65/ C ( o ) comliant = assed 67

65 Universal cables Cable tye Page Ordering key Weight kg/km Amount of fibers Jelly free dry block multi-fiber loose tube u to 24 fibers /BQ(ZN)H /Q(ZN)H u to 12 u to 24 Jelly free - dry block glass-armoured multi fiber loose tube u to 24 fibers /Q(ZNG)H /Q(ZNG)H /Q(ZNG)H u to 24 u to 24 u to 24 Jelly free - dry block glass-armoured multi fiber loose tube Twintube u to 24 fibers /Q(ZNG)H u to 48 Jelly free - dry block glass-armoured multi fiber loose tube u to 144 fibers /BQSN(ZNG)H /BQSN(ZNG)H /BQSN(ZNG)H /BQSN(ZNG)H /BQSN(ZNG)H u to 24 u to 48 u to 72 u to 96 u to 144 Non-armoured multi-fiber loose tube u to 24 fibers /BW(ZN)H /W(ZNG)H u to 12 u to 24 Glass-armoured multi-fiber loose tube u to 24 fibers /W(ZNG)H /W(ZNG)H /W(ZNG)H u to 24 u to 24 u to 24 Glass-armoured multi-fiber loose tube TWINTUBE u to 24 fibers /W(ZNG)H u to 24 Glass-armoured multi-fiber loose tube u to 144 fibers Steel-armoured multi-fiber loose tube u to 24 fibers /BWSN(ZNG)H /BWSN(ZNG)H /BWSN(ZNG)H /BWSN(ZNG)H /BWSN(ZNG)H u to 24 u to 48 u to 72 u to 96 u to /W(ZN)HAH u to 24 68

66 Multi-fiber loose tube Jacket Ø mm Jacket material Rodent rotection Tensile strength N Crush resistance N/dm Temerature range (in service) C Fire roagation IEC Fire roagation IEC CPR 2011/305/EU mini standard LSFH LSFH to to +70 standard standard standard LSFH LSFH LSFH to to to +70 Dca-s1a, d2, a1 Dca-s1a, d0, a1 B2ca-s1a, d0, a1 standard 8.8 x 9.4 LSFH to +70 Dca-s1a, d0, a1 mini mini mini mini mini LSFH LSFH LSFH LSFH LSFH to to to to to +70 Dca-s1a, d0, a1 Dca-s1a, d0, a1 Dca-s2, d0, a1 Dca-s2, d0, a1 Eca mini standard LSFH LSFH to to +70 standard standard standard LSFH LSFH LSFH to to to +70 Dca-s2, d1, a1 Dca-s1a, d0, a1 standard LSFH to +70 Dca-s2, d2, a1 mini mini mini mini mini LSFH LSFH LSFH LSFH LSFH to to to to to +70 standard 8.0 LSFH to +70 Dca-s1a, d0, a1 Dca-s1a, d0, a1 69

67 Universal cables Cable tye Page Ordering key Weight kg/km Amount of fibers Steel-armoured multi-fiber loose tube TWINTUBE u to 24 fibers /W(ZNG)HAH u to 24 Steel-armoured multi-fiber loose tube u to 72 fibers /BWSN(ZNG)HAH /BWSN(ZNG)HAH u to 48 u to 72 RADOX multi-fiber loose tube u to 24 fibers DNV GL Tye aroved multi fiber loose tube /W(ZNG)R u to /W(ZN)HAR- 82_DNV 115 u to 24 DNV GL Tye aroved multi fiber loose tube /W(ZNG)H u to24 RADOX steel-armoured multi-fiber loose tube u to 24 fibers /W(ZN)HAR u to 24 70

68 Multi-fiber loose tube Jacket Ø mm Jacket material Rodent rotection Tensile strength N Crush resistance N/dm Temerature range (in service) C Fire roagation IEC Fire roagation IEC CPR 2011/305/EU standard 12.5 LSFH to +70 mini mini LSFH LSFH to to +70 standard 8.5 RADOX to +85 Cca-s1a, d0, a1 standard 8.2 RADOX to +85 standard 12 LSFH to +70 standard 8.2 RADOX to

69 Jellyfree multi-fiber loose tube cables u to 24 fibers Proerties Metal free indoor and outdoor cable Jelly free Strain relief with aramide yarn Ricord for easy jacket removal Low smoke, halogen free and self-extinguishing Low fire load for high safety requirements No need for cleaning the fibers Alications Data cable in distribution networks For vertical alications u to 500 m For installation in cable ducts Design Cable design dry multi-fiber loose tube with 2 u to 24 fibers 1 ricord Strain relief Fiber colour Jacket material aramide yarn according to colour code LSFH Jacket colour E9 yellow G50 - OM2 G50 - OM3 G 50 - OM4 G50 OM5 orange turquoise heather violet lime green G OM1 orange According to IEC Ordering information /BQ(ZN)H /Q(ZN)H- 50 Please see age

70 Jellyfree multi-fiber loose tube cables u to 24 fibers Secification Jacket Ø mm Number of fibers 2 to 12 2 to 24 Mulit fiber loose tube mm mini standard Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Thermal roerties Temerature range during installation C 10 to to +50 IEC F1 in service C 25 to to +70 in storage C 25 to to +70 Combustion roerties Fire load MJ/m Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant = assed 73

71 Jellyfree glass-armoured multi-fiber loose tube cables u to 24 fibers Proerties Metal free indoor and outdoor cable Jelly free, no need for cleaning the fibers Rodent-rotected, glass-armoured Low smoke, halogen free and self-extinguishing Longitudinal and transversal watertight cable Alications Data cable in distribution networks For vertical alications u to 500 m For installation in cable ducts For high safety requirements in case of fire Design Cable design dry multi-fiber loose tube with u to 24 fibers Strain relief and rodent rotection glass roving Fiber colour according to colour code Jacket material LSFH Jacket colour colour coded According to IEC Ordering information /Q(ZNG)H * /Q(ZNG)H /Q(ZNG)H Please see age 149. Arovals * UL listed acc. OFNR/OFNG/OFN 74

72 Jellyfree glass-armoured multi-fiber loose tube cables u to 24 fibers Secification Jacket Ø mm Number of fibers 2 to 24 2 to 24 2 to 24 Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 Imact resistance long-term N/dm W = 1 J W = 4.4 J W = 4.5 J imacts IEC E4 Thermal roerties Temerature range during installation C 10 to +50 IEC F1 in service C 40 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical single cable IEC Fire roagation on vertical cable bundle IEC Smoke density IEC Water enetration h = 1 m, 24 h, < 3 m IEC F5B 2011/65/EC (RoHS) comliant (EU) No 305/2011 (CPR) * ** *** EN = assed * Dca-s1a, d2, a1 ** Dca-s1a, d0, a1 *** B2ca-s1a, d0, a1 75

73 Jellyfree glass-armoured multi-fiber loose tube cables TWINTUBE u to 24 fibers Proerties Metal free indoor and outdoor cable Jellyfree, no need for cleaning the fiber Rodent-rotected, glass-armoured Ricord for easy jacket removal Low smoke, halogen free and self-extinguishing Longitudinal and transversal watertight cable Alications For installations directly in the ground and in mechanically unrotected environments As data cable in distribution networks For installation outdoor, in wet cable ducts and ies Ideal for alications involving high safety requirements in case of a fire Design Cable design Strain relief and rodent rotection Jacket material Jacket colour 2 multi-fiber loose tubes, jelly-filled with 2 x 12 fibers 2 ricords glass-roving LSFH colour coded Gemäss IEC Ordering information /Q(ZNG)H Please see age

74 Jellyfree glass-armoured multi-fiber loose tube cables TWINTUBE u to 24 fibers Secification Jacket Ø mm Number of fibers 2 12 Arox. weight kg/km 101 Mechanical roerties Tensile strength during installation N 3000 IEC E1 in service N 1500 Min. bend radius during installation mm 150 1) IEC E11 in service mm 100 1) Crush resistance short-term N/dm ) IEC E3 long-term N/dm ) Water enetration h = 1 m, 24 h, < 3 m b IEC F5B Thermal roerties Temerature range during installation C 10 to +50 IEC F1 in service C 20 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m 1.85 Fire roagation on a vertical single cable IEC Fire test with circuit integrity (CI) min. 180 IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant (EU) No 305/2011 (CPR) Dca-s1a, d0, a1 EN = assed 1) refers to the flat side of the cable 77

75 Jellyfree glass-armoured multi-fiber loose tube cables u to 144 fibers Proerties Metal free indoor and outdoor cable Jellyfree, no need for cleaning the fiber Rodent rotection, glass-armoured Ricord for easy jacket removal Jacket material according to UL 94V-0 Low smoke, halogen free and self-extinguishing Longitudinal and transversal watertight cable Alications Data cable in distribution networks For alications involving high safety requirements in case of fire Design Cable design Strain relief and rodent rotection Jacket material Jacket colour 4 to 12 multi-fiber loose tube, jelly-free with 2 to 12 fibers strength member 2 ricords glass-roving LSFH colour coded According to IEC Ordering information /BQSN(ZNG)H /BQSN(ZNG)H /BQSN(ZNG)H /BQSN(ZNG)H /BQSN(ZNG)H Please see age

76 Jellyfree glass-armoured multi-fiber loose tube cables u to 144 fibers Secification Number of fibers 24/ Jacket Ø mm Number of fibers Mini Mini Mini Mini Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Schlagfestigkeit W = 2.21 J imact IEC E4 Water enetration h = 1 m, 24 h, < 3 m IEC F5A Thermal roerties Temerature range during installation C 10 bis +50 IEC F1 in service C 40 bis +70 in storage C 40 bis +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical single cable IEC Brandfortleitung an einem vertikalen Kabelbündel IEC Fire test with circuit integrity min IEC Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) konform (EU) No 305/2011 (CPR) * ** ** *** EN = assed * Dca-s1a, d0, a1 ** Dca-s2, d0, a1 *** Eca 79

77 Non-armoured multi-fiber loose tube cables u to 24 fibers Proerties Metal free indoor and outdoor cable Strain relief with aramide yarn Ricord for easy jacket removal Low smoke, halogen free and self-extinguishing For use in ducts and in unrotected environment Alications Data cable in distribution networks Installation in indoor and outdoor areas For installation in cable ducts Design Cable design multi-fiber loose tube with 2 u to 24 fibers, jelly-filled 1 ricord Strain relief Fiber colour Jacket material Jacket colour aramide yarn according to colour code LSFH black According to IEC Ordering information /BW(ZN)H /W(ZN)H Please see age 151,

78 Non-armoured multi-fiber loose tube cables u to 24 fibers Secification Jacket Ø mm Number of fibers 2 to 12 2 to 24 Multi fiber loose tube mini standard Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 Imact resistance Reeated bending long-term N/dm W = 1.4 J W = 2.21 J r = 35 mm/1 kg r = 50 mm/1 kg imacts 50 cycles IEC E4 IEC E6 Thermal roerties Temerature range during installation C 10 to to +50 IEC F1 in service C 40 to to +70 in storage C 40 to to +70 Combustion roerties Fire load MJ/m Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant = assed 81

79 Glass-armoured multi-fiber loose tube cables u to 24 fibers Proerties Metal free indoor and outdoor cable Rodent rotection, glass-armoured For high mechanical requirements Low smoke, halogen free and self-extinguishing Low fire load for high safety requirments Longitudinal and transversal watertight cable Alications For installation directly in the ground and in mechanically unrotected environments Data cable in distribution networks For installation outdoor, in wet cable ducts and ies Ideal for high safety requirements in case of a fire Design Cable design Strain relief and rodent rotection Fiber colour Jacket material Jacket colour multi-fiber loose tube u to 24 fibers, jelly-filled glass-roving according to colour code LSFH black According to IEC Ordering information /W(ZNG)H /W(ZNG)H /W(ZNG)H Please see age 152, 153. Arovals UL listed acc. OFN/OFNG 82

80 Glass-armoured multi-fiber loose tube cables u to 24 fibers Secification Jacket Ø mm Number of fibers 2 to 24 2 to 24 2 to 24 Multi fiber loose tube standard standard standard Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 Imact resistance long-term N/dm W = 1.5 J W = 4.41 J W = 4.5 J imacts IEC E4 Reeated bending r = 50 mm/2.5 kg cycles IEC E6 Torsion ± 1440, length 1 m cycles IEC E7 Water enetration h = 1 m, 48 h, < 3 m IEC F5B Thermal roerties Temerature range during installation C 10 to to to +50 IEC F1 in service C 40 to to to +70 in storage C 40 to to to +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical single cable IEC Fire roagation on a vertical cable bundle IEC Fire test with circuit integrity (CI) min IEC Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant (EU) No 305/2011 (CPR) * ** EN = assed * Dca-s2, d1, a1 ** Dca-s1a, d0, a1 83

81 Glass-armoured multi-fiber loose tube cables TWINTUBE u to 24 fibers Proerties Metal free indoor and outdoor cable Rodent-rotected, glass-armoured Ricord for easy jacket removal Low smoke, halogen free and self-extinguishing Longitudinal and transversal watertight cable Alications For installations directly in the ground and in mechanically unrotected environments As data cable in distribution networks For installation outdoor, in wet cable ducts and ies Ideal for alications involving high safety requirements in case of a fire Design Cable design 2 multi-fiber loose tubes, jelly-filled with 2 x 12 fibers 2 ricords Strain relief and rodent rotection Jacket material Jacket colour glass-roving LSFH black According to IEC Ordering information /W(ZNG)H Please see age

82 Glass-armoured multi-fiber loose tube cables TWINTUBE u to 24 fibers Secification Jacket Ø mm Number of fibers 2 12 Arox. weight kg/km 101 Mechanical roerties Tensile strength during installation N 3000 IEC E1 in service N 1500 Min. bend radius during installation mm 150 1) IEC E11 in service mm 100 1) Crush resistance short-term N/dm ) IEC E3 long-term N/dm ) Water enetration h = 1 m, 24 h, < 3 m IEC F5B Thermal roerties Temerature range during installation C 10 to +50 IEC F1 in service C 20 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m 1.85 Fire roagation on a vertical single cable IEC Fire test with circuit integrity (CI) min. 180 IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant (EU) No 305/2011 (CPR) Dca-s2, d2, a1 EN = assed 1) refers to the flat side of the cable 85

83 Glass-armoured multi-fiber loose tube cables u to 144 fibers Proerties Metal free indoor and outdoor cable Rodent rotection, glass-armoured Ricord for easy jacket removal Jacket material according to UL 94V-0 Low smoke, halogen free and self-extinguishing Longitudinal and transversal watertight cable Alications Data cable in distribution networks For alications involving high safety requirements in case of fire Design Cable design 4 to 12 multi-fiber loose tube, jelly-filled with 2 to 12 fibers strength member 2 ricords Strain relief and rodent rotection Jacket material Jacket colour According to IEC glass-roving LSFH black (otional with 2 orange stries) Ordering information /BWSN(ZNG)H /BWSN(ZNG)H /BWSN(ZNG)H /BWSN(ZNG)H /BWSN(ZNG)H Please see age

84 Glass-armoured multi-fiber loose tube cables u to 144 fibers Secification Number of fibers 24/ Jacket Ø mm Multi fiber loose tube mini mini mini mini Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Imact resistance W = 2.21 J imact IEC E4 Water enetration h = 1 m, 24 h, < 3 m IEC F5A Thermal roerties Temerature range during installation C 10 to +50 IEC F1 in service C 40 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical single cable IEC Fire roagation on a vertical cable bundle IEC Fire test with circuit integrity 90min 90min 90min IEC Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant (EU) No 305/2011 (CPR) * EN = assed * Dca-s1a, d0, a1 87

85 Steel-armoured multi-fiber loose tube cables Simlex and TWINTUBE Simlex u to 24 fibers TWINTUBE þ u to 24 fibers Proerties Steel-armoured indoor and outdoor cable Rodent-rotected (steel-armoured) For high mechanical and thermal requirements Low smoke, halogen free and self-extinguishing Low fire load for high safety requirements Alications For outdoor and indoor installations and in mechanically unrotected environments Data cable in distribution networks For installations directly in the ground Design Cable design Strain relief Rodent rotection Jacket material Jacket colour 1 to 2 multi-fiber loose tubes, jelly-filled with 2 to 24 fibers aramid yarn/glass-roving steel-armoured LSFH black According to IEC Ordering information 24- /W(ZN)HAH /W(ZNG)HAH- 125 Please see age 154,

86 Steel-armoured multi-fiber loose tube cables Simlex and TWINTUBE Secification Simlex TWINTUBE Jacket Ø mm Number of fibers 2 to 24 2 x 12 Multi-fiber loose tube mm standard standard Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm ) IEC E11 in service mm ) Crush resistance short-term N/dm ) IEC E3 long-term N/dm ) Thermal roerties Temerature range during installation C 10 to to +50 IEC F1 in service C 40 to to +70 in storage C 40 to to +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical single cable IEC Fire roagation on a vertical cable bundle IEC Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC Fire test with circuit integrity (CI) min IEC /65/EC (RoHS) comliant = assed 1) refers to the flat side of the cable 89

87 Steel-armoured multi-fiber loose tube cables u to 72 fibers Proerties Steel-armoured indoor and outdoor cable Rodent-rotected (steel-armoured) For use in ducts and unrotected environment For high mechanical requirements Low smoke, halogen free and self-extinguishing Alications For outdoor and indoor installations and in mechanically unrotected environments Data cable in distribution networks For installations directly in the ground Design Cable design 4 to 6 multi-fiber loose tube, jelly-filled with 2 to 12 fibers strength member 2 ricords Strain relief Rodent rotection Jacket material Jacket colour glass-roving steel-armoured LSFH black According to IEC Ordering information 24- /BWSN(ZNG)HAH /BWSN(ZNG)HAH /BWSW(ZNG)HAH- 140 Please see age

88 Steel-armoured multi-fiber loose tube cables u to 72 fibers Secification 4 6 Jacket Ø mm Number of fibers 24/48 72 Multi-fiber loose tube mini mini Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Imact resistance W = 2.21 J imacts IEC E4 Thermal roerties Temerature range during installation C 10 to +50 IEC F1 in service C 40 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical single cable IEC Fire roagation on a vertical cable bundle cable IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant = assed 91

89 RADOX glass-armoured multi-fiber loose tube cables Proerties Metal free rodent-rotected indoor and outdoor cable High flexibility and form stability UV and ozone resistance High abrasion and soldering iron resistance Halogen free cable with imroved behaviour in case of fire Meets requirements for circuit integrity in case of fire Best oil and fluid resistance Alications Ideal for alications involving safety requirements in case of fire Rolling stock in railway Oil and gas latforms Shis Tunnels Underground train stations Design Cable design multi-fiber loose tube u to 24 fibers, jelly-filled RADOX cable Strain relief glass-roving Jacket material RADOX Jacket colour black According to IEC Ordering information 24- /W(ZNG)R- 85 Please see age

90 RADOX glass-armoured multi-fiber loose tube cables Secification Jacket Ø 8.5 Number of fibers 2 to 24 Arox. weight kg/km 88 Mechanical roerties Tensile strength during installation N 3000 IEC E1 in service N 1500 Min. bend radius during installation mm 130 IEC E11 in service mm 80 Crush resistance short-term N/dm IEC E3 long-term N/dm 2500 Imact resistance W = 4.41 J imacts 15 IEC E4 Water enetration h = 1 m, 24 h, < 3 m IEC F5B Thermal roerties Temerature range during installation C 10 to +50 IEC F1 in service C 60 to +85 in storage C 60 to +85 Combustion roerties Fire load MJ/m 1 Fire roagation on a vertical single cable IEC Fire roagation on a vertical bundle cable IEC Fire test with circuit integrity (CI) min. 180 IEC Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant (EU) No 305/2011 (CPR) Cca-s1a, d0, a1 EN = assed RADOX Meets LSFH roerties. RADOX jacket material comliant to EM 104 secification of EN for railway rolling stock alication. Fully comliant to CEN/TS for fire safety in railway alications. Meets the increased requirements of SHF2 (SHF Mud) and fulfills flame, fire, oil and mud resistance acc. NEK 606. NEK 606 standard for offshore oil and gas, shi and marine allications. Alication acc. NEK 606: outdoor cable for emergency systems oerational during fire. 93

91 DNV GL Tye aroved multi-fiber loose tube cables Steel- or Glass-armoured RADOX LSFH Proerties For high mechanical and thermal requirements Low smoke, halogen free and self-extinguishing Low fire load for high safety requirements DNV GL Tye aroved Alications For outdoor and indoor installations and in mechanically unrotected environments For installations directly in the ground For oil and gas latforms Design Cable design multi-fiber loose tubes u to 24 fibers, jelly-filled Strain relief aramid yarn/glass-roving Rodent rotection steel-armoured glass-roving Jacket material RADOX LSFH Jacket colour black According to IEC Ordering information 24- /W(ZN)HAR- 82 Certificate No. TAE /W(ZNG)H- 120 Certificate No. TAE Please see age 156. Arovals DNV GL Tye aroved Certificate No.: TAE TAE

92 DNV GL Tye aroved multi-fiber loose tube cables Steel- or Glass-armoured Secification Steel armoured Glas armoured Jacket Ø mm Number of fibers Multi-fiber loose tube mm standard standard Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance 5 min N/dm IEC E3 Cold beding radius T = 25 C mm n/a 120mm IEC E11 Imact resistance W = 5 J imacts 1 1 IEC E4 Reeated bending R=100 / weigth = 10kg cycles n/a 500 IEC E6 Torsion ± 180 cycles IEC E7 Thermal roerties Temerature range during installation C 20 to to +50 IEC F1 in service C 50 to to +70 in storage C 50 to to +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical single cable IEC Fire roagation on a vertical cable bundle IEC Fire test with circuit integrity (CI) min IEC EN50200 Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC Oil resistance IRM h; 100 C 8h; 70 C IEC Driling fluid resitance IRM h; 100 C n/a EN50200 Driling fluid resitance CaBr2 56d; 70 C n/a EN /65/EC (RoHS) = assed comliant 95

93 RADOX Steel-armoured multi-fiber loose tube cables Proerties Steel-armoured indoor and outdoor cable Rodent-rotected (steel-armoured) For high mechanical and thermal requirements Low smoke, halogen free and self-extinguishing Low fire load for high safety requirements Alications For outdoor and indoor installations and in mechanically unrotected environments Data cable in distribution networks For installations directly in the ground Design Cable design Strain relief Rodent rotection multi-fiber loose tube u to 24 fibers, jelly-filled aramid yarn steel-armoured Jacket material RADOX Jacket colour black According to IEC Ordering information 24- /W(ZN)HAR- 82 Please see age

94 RADOX Steel-armoured multi-fiber loose tube cables Secification Simlex Jacket Ø mm 8.2 Number of fibers 2 to 24 Multi-fiber loose tube mm standard Arox. weight kg/km 115 Mechanical roerties Tensile strength during installation N 3750 IEC E1 in service N 2000 Min. bend radius during installation mm 120 IEC E11 in service mm 80 Crush resistance short-term N/dm 8000 IEC E3 long-term N/dm 2000 Imact resistance W = 4.5 J imacts 50 IEC E4 Reeated bending R=110 / weigth = 2.5kg cycles IEC E6 Kink resistance Radius mm 10 IEC E10 Torsion ± 180 cycles IEC E7 Thermal roerties Temerature range during installation C 20 to +70 IEC F1 in service C 50 to +85 in storage C 50 to +85 Combustion roerties Fire load MJ/m 1.25 Fire roagation on a vertical single cable IEC Fire roagation on a vertical cable bundle IEC Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant = assed 1) refers to the flat side of the cable 97

95 Outdoor cables Cable tye Page Ordering key Weight kg/km Amount of fibers Non-armoured multi-fiber loose tube u to 24 fibers /BW(ZN)V /W(ZN)Y u to 12 u to 24 ADSS loose tube u to 12 fibers /BW(ZN)V-...G55 23 u to 12 Glass-armoured multi-fiber loose tube u to 24 fibers /W( G) /W(ZNG)Y /W(ZNG)Y u to 24 u to 24 u to 24 Glass-armoured multi-fiber loose tube TWINTUBE, u to 24 fibers /W(ZNG)Y u to 24 Glass-armoured multi-fiber loose tube u to 144 fibers Steel-armoured multi-fiber loose tube u to 24 fibers /BWSN(ZNG)V /BWSN(ZNG)V /BW ( G) /BWSN(ZNG)V /BW ( G) u to 48 u to 48 u to 72 u to 96 u to /W(ZN)YAY u to 24 Steel-armoured multi-fiber loose tube TWINTUBE u to 24 fibers /W(ZNG)YAY u to 24 Steel-armoured multi-fiber loose tube u to 72 fibers /BWSN(ZNG)VAV /BW ( G) u to 48 u to 72 = assed 98

96 Multi-fiber loose tube Jacket Ø mm Jacket material Rodent rotection Tensile strength N Crush resistance N/dm Temerature range (in service) C mini standard PE PE to to +70 mini 5.5 PE to +70 standard standard standard PE PE PE to to to +70 standard PE to +70 mini mini mini mini mini PE PE PE PE PE to to to to to +70 standard 8.0 PE to +70 standard 12.5 PE to +70 mini mini PE PE to to

97 Non-armoured multi-fiber loose tube cables u to 24 fibers Proerties Metal free outdoor cable Strain relieved with aramide yarn For use in ducts and unrotected environment High chemical resistance against acids and alkalies Halogen free and non-corrosive fire gases Alications Data cable in distribution networks For outdoor installations in humid and wet cable ducts Design Cable design Strain relief Jacket material Jacket colour multi-fiber loose tube with 2 u to 24 fibers, jelly-filled aramide yarn PE black or colour coded ccording to C Ordering information u to /BW(ZN)V u to /W(ZN)Y Please see age

98 Non-armoured multi-fiber loose tube cables u to 24 fibers Secification Jacket Ø mm Number of fibers 2 to 12 2 to 24 Multi fiber loose tube mini standard Arox. weight kg/km Mechanical roerties Tensile strength during installation N C in service N Min. bend radius during installation mm C in service mm Crush resistance short-term N/dm C Imact resistance Reeated bending long-term N/dm W = 1.4 J W = 2.21 J r = 35 mm/1 kg r = 50 mm/1 kg imacts 50 cycles C C Thermal roerties Temerature range during installation C 10 to to +50 C F1 in service C 40 to to +70 in storage C 40 to to +70 Combustion roerties Fire load MJ/m /65/EC (RoHS) comliant = assed 101

99 ADSS 1) multi-fiber loose tube cables u to 12 fibers Proerties Aerial use, self-suorting Extremely light weight cable construction Otimized diameter for easy installation Metal free outdoor cable Strain relieved with aramide yarn For high mechanical requirements Halogen free and non-corrosive fire gases Surface resistance roerties Alications Aerial use Self-suorting Design Cable design Strain relief Jacket material Jacket colour multi-fiber loose tube with 2 u to 12 fibers, jelly-filled aramide yarn HDPE black ccording to C Ordering information u to /BW(ZN)V-...G55 Please see age 158. ote: nstallation material such as suort-anchor ( ) and dead-end-anchor s ( ) are additionally a ailable. 1) ADSS = All-Dielectric, Self-Suorting 102

100 ADSS multi-fiber loose tube cables u to 12 fibers Secification Jacket Ø mm 5.5 Number of fibers 2 to 12 Arox. weight kg/km 23 Mechanical roerties Tensile strength during installation N 2800 C in service N 1400 Min. bend radius during installation, 6 turns mm 82.5 C in service, 6 turns mm 55 Crush resistance short-term N/dm 5000 C long-term N/dm 3000 Surface resistance > 12 kv EN Thermal roerties Temerature range during installation C 25 to +60 C F1 in service C 40 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m /95/EC (RoHS) comliant Performance under load San length m sag % sag m wind load km/h tensile load with wind load N 103

101 Glass-armoured multi-fiber loose tube cables u to 24 fibers Proerties Metal free outdoor cable Rodent rotection, glass-armoured For use in ducts and in unrotected environment High chemical resistance against acids and alkalies For high mechanical and thermal stability Halogen free and non-corrosive fire gases Longitudinal and transversal watertight cable Alications For installation directly in the ground and in mechanically unrotected environments Data cable in distribution networks For installation outdoor, in wet cable ducts and ies Design Cable design Strain relief and rodent rotection Jacket material Jacket colour multi-fiber loose tube with 2 u to 24 fibers, jelly-filled glass-roving PE black ccording to C Ordering information u to /W( G) u to /W(ZNG)Y u to /W(ZNG)Y Please see age 158,

102 Glass-armoured multi-fiber loose tube cables u to 24 fibers Secification Jacket Ø mm Number of fibers each bundle 2 to 24 2 to 24 2 to 24 Multi fiber loose tube standard standard standard Arox. weight kg/km Mechanical roerties Tensile strength during installation N C in service N Min. bend radius during installation mm C in service mm Crush resistance short-term N/dm C Imact resistance Reeated bending long-term N/dm W = 4.41 J W = 4.5 J r = 80 mm r = 120 mm Torsion ± 1440 ± 360 imacts cycles cycles C C C Water enetration h = 1 m, 24 h, < 3 m C F5B Thermal roerties Temerature range during installation C 10 to to to +50 C F1 in service C 40 to to to +70 in storage C 40 to to to +70 Combustion roerties Fire load MJ/m /65/EC (RoHS) comliant = assed 105

103 Glass-armoured multi-fiber loose tube cables TWINTUBE u to 24 fibers Proerties Metal free outdoor cable Rodent-rotected, glass-armoured For use in ducts and unrotected environment Ricord for easy jacket removal High chemical resistance against acids and alkalies Halogen free and non-corrosive fire gases Longitudinal and transversal watertight cable Alications For installations directly in the ground and in mechanically unrotected environments Data cable in distribution networks For installation outdoor, in wet cable ducts and ies Design Cable design Strain relief and rodent rotection Jacket material Jacket colour 2 multi-fiber loose tubes, jelly-filled with u to 2 12 fibers 2 ricords glass-roving PE black ccording to C Ordering information u to /W(ZNG)Y Please see age

104 Glass-armoured multi-fiber loose tube cables TWINTUBE u to 24 fibers Secification Jacket Ø mm Number of fibers 2 x 12 2 u to 12 fibers Arox. weight kg/km 69 Mechanical roerties Tensile strength during installation N 3000 C in service N 1500 Min. bend radius during installation mm 150 1) C in service mm 100 1) Crush resistance short-term N/dm ) C long-term N/dm ) Reeated bending r = 150 mm, weight = 5 kg cycles ) C Water enetration h = 1 m, 24 h, < 3 m C F5B Thermal roerties Temerature range during installation C 10 to +50 C F1 in service C 20 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m /65/EC (RoHS) comliant = assed 1) refers to the flat side of the cable 107

105 Glass-armoured multi-fiber loose tube cables u to 144 fibers Proerties Metal free outdoor cable Rodent rotection, glass-armoured For use in ducts and unrotected environment Ricord for easy jacket removal High chemical resistance against acids and alkalies Halogen free and non-corrosive fire gases Longitudinal and transversal watertight cable Alications For installation directly in the ground and in mechanically unrotected environments Data cable in distribution networks For installation outdoor, in wet cable ducts and ies Design Cable design 4 to 12 multi-fiber loose tube, jelly-filled with 2 to 12 fibers strength member 2 ricords Strain relief and rodent rotection Jacket material Jacket colour glass-roving PE black with 2 orange stries ccording to C Ordering information /BWSN(ZNG)V /BWSN(ZNG)V /BW ( G) /BWSN(ZNG)V /BWSN(ZNG)V Please see age

106 Glass-armoured multi-fiber loose tube cables u to 144 fibers Secification Fiber u to 24/ Jacket Ø mm Multi fiber loose tube mini mini mini mini Arox. weight kg/km Mechanical roerties Tensile strength during installation N C in service N Min. bend radius during installation mm C in service mm Crush resistance short-term N/dm C long-term N/dm Imact resistance W = 2.21 J imacts C Water enetration h = 1 m, 24 h, < 3 m C F5B Thermal roerties Temerature range during installation C 10 to +50 C F1 in service C 40 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m /65/EC (RoHS) comliant = assed 109

107 Steel-armoured multi-fiber loose tube cables Simlex and TWINTUBE Simlex u to 24 fibers TWINTUBE u to 24 fibers Proerties Steel-armoured outdoor cable Rodent-rotected (steel-armoured) High chemical resistance against acids and alkalies Halogen free and non-corrosive fire gases Alications For outdoor installations and in mechanically unrotected environments Data cable in distribution networks For installations directly in the ground Design Cable design Strain relief Rodent rotection Jacket material Jacket colour 1 to 2 multi-fiber loose tubes, jelly-filled with 2 to 24 fibers aramid yarn/glass-roving steel-armoured PE black ccording to C Ordering information u to 24- /W(ZN)YAY- 80 u to 24- /W(ZNG)YAY- 125 Please see age B + Fiber Otic Cables

108 Steel-armoured multi-fiber loose tube cables Simlex and TWINTUBE Secification Simlex TWINTUBE Jacket Ø mm Numbers of fibers Multi-fiber loose tube standard standard Arox. weight kg/km Mechanical roerties Tensile strength during installation N C in service N Min. bend radius during installation mm * C in service mm * Crush resistance short-term N/dm * C long-term N/dm * Imact resistance W = 4.41 J imacts 50 C W = 15 J imacts 3 Thermal roerties Temerature range during installation C 10 to to +50 C F1 in service C 40 to to +70 in storage C 40 to to +70 Combustion roerties Fire load MJ/m /65/EC (RoHS) comliant = assed * refers to the flat side of the cable 111

109 teel-armoured multi-fiber loose tube cables u to 72 fibers Proerties Steel-armoured outdoor cable Rodent-rotected (steel-armoured) For use in ducts and unrotected environment Halogen free and non-corrosive fire gases Alications For outdoor installations and in mechanically unrotected environments Data cable in distribution networks For installation directly in the ground Design Cable design Strain relief Rodent rotection Jacket material Jacket colour 4 to 6 multi-fiber loose tubes, jelly-filled with 2 to 12 fibers strength member 2 ricords glass-roving steel-armoured PE black ccording to C Ordering information /BWSN(ZNG)VAV /BWSN(ZNG)VAV /BW W( G) Please see age B + Fiber Otic Cables

110 teel-armoured multi-fiber loose tube cables u to 72 fibers Secification 4 6 Jacket Ø mm Fiber quantity u to 24/48 72 Multi-fiber loose tube mini mini Arox. weight kg/km Mechanical roerties Tensile strength during installation N C in service N Min. bend radius during installation mm C in service mm Crush resistance short-term N/dm C long-term N/dm Imact resistance W = 2.21 J imacts C Thermal roerties Temerature range during installation C 10 to +50 C F1 in service C 40 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m /65/EC (RoHS) comliant = assed 113

111 Secial cables Cable tye Page Ordering key Weight kg/km Amount of fibers Simlex cables with tight tube /FJZ Rugged simlex cables /FJH(ZN)Z Industry Link TWINFLEX and rugged minicord breakout cables /FJ(ZN)Z /...(ZN)Z Industry Link TWINFIX /...(ZNG)H Industry link QUADFIX /F ( G) / ( G) obile field cables /F ( ) /F ( ) /FSN(ZN)Z /FSN(ZN)Z Glass-armoured riser cables 2 tubes /F( G) /F( G) /F(ZNG)H Glass-armoured riser cables 4 tubes /F ( G) ugged multi-fiber loose tube u to 24 fibers (dry) / ( G) u to 24 Drag chain cables /FSN(ZN)YZ u to 12 RADOX drag chain cable /F ( ) u to 12 Hybrid cables /CW C /CW C /W ( G) C /WSN(ZNG)Y C... u to 4 u to 8 u to 60 u to

112 Amount of conductors Tube Ø mm Simlex cable Ø mm Jacket Ø mm Jacket material Direct connector termination Tensile strength N Crush resistance N/dm Temerature range in service C Fire roagation IEC Fire roagation IEC CPR 2011/305/EU TPU to TPU to TPU TPU to to x7.2 LSFH to +70 Dca-s1a, d0, a LSFH to +70 Cca-s1a, d0, a TPU TPU TPU TPU to to to to LSFH LSFH LSFH to to to +75 Dca-s2, d0, a1 Dca-s1a, d0, a1 Dca-s2a, d1, a LSFH to TPU to TPU to RADOX to +85 u to 3 u to 4 u to 4 u to LSFH LSFH PE PE to to to to

113 Simlex cables with tight tube Proerties etal free indoor and outdoor cable Strain relieved with aramide yarn For direct connector assembly with strain relief Tight bend radii For high mechanical and thermal stability alogen free and non-corrosi e fire gases Alications For outdoor and indoor installations atch cable in distribution centres Design Tube tight tube 0.9 mm train relief aramide yarn Jacket material TPU acket colour E9 yellow G50 O 2 orange G50 O 3 tur uoise G50 O 4 heather iolet G62.5 O 1 orange ccording to C Ordering information /FJZ Please see age

114 Simlex cables with tight tube Secification Jacket Ø mm 1.9 Tube Ø mm 0.9 rox. weight kg/km 3 Mechanical roerties Tensile strength during installation N 180 C in service N 90 Min. bend radius 1) during installation mm 50 C in service mm 25 Crush resistance short-term N/dm C long-term N/dm 2000 Imact resistance W 0.74 imacts 30 C Reeated bending r = 30 mm, weight = 1 kg cycles 2500 C Thermal roerties Temerature range during installation C 10 to +50 C F12 in service C 40 to +85 in storage C 40 to +85 Combustion roerties Fire load MJ/m /65/ C ( o ) comliant 1) maller bending radius are ossible with 9/125 owbend ( T G.657) and G50/125-O 3/O 4 BendOtimi ed. 117

115 Rugged simlex cables Proerties etal free indoor and outdoor cable Strain relieved with aramide yarn For direct connector assembly with strain relief High chemical resistance against acids and alkalies For high mechanical and thermal stability alogen free and non-corrosi e fire gases mro ed crash resistance Alications Industry LAN obile data cablings in harsh en ironment Machinery cablings, drag chains Design Cable design 1 single fiber cable with tight tubes train relief aramide yarn Jacket material TPU/black acket colour E9 yellow G50 O 2 orange G62.5 O 1 orange ccording to C Ordering information /FJH(ZN)Z Please see age

116 Rugged simlex cables Secification Jacket Ø mm 6.0 ingle fiber cable mm 2.7 Tube Ø mm 0.9 rox. weight kg/km 40 Mechanical roerties Tensile strength during installation N 4000 C in service N 1500 Min. bend radius during installation mm 90 C in service mm 60 Crush resistance short-term N/dm C long-term N/dm Imact resistance W 2.25 imacts 150 C Reeated bending r 30 mm weight 2.5 kg cycles C Flexing r = 77 mm elocity 2.2 m/s L = 2 m cycles HUBER+SUHNER drag chain test Thermal roerties Temerature range during installation C 10 to +60 C F1 in service C 25 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m 0.57 alogen acid gas jacket material C egree of acidity jacket material C /65/ C ( o ) comliant = assed 119

117 ndustry ink TW F and rugged minicord breakout cables ugged minicord breakout Industry Link TWINFLEX Proerties etal free indoor and outdoor cable For direct connector assembly with strain relief Strain relieved with aramide yarn icord for easy acket remo al alogen free and non-corrosi e fire gases mro ed crush resistance For high thermal and mechanical stability High chemical resistance against acids and alkalies High abrasive resistance Alications For flexible mo ed and fixed use Industrial Ethernet and LAN Machine cabling, drag chains s control or data cable in factory automation obile data cabling for harsh en ironment Connection to outdoor de ices Design Cable design train relief Jacket material acket colour 2 single fiber cables with tight tubes 1 ricord aramide yarn TPU black ccording to C Ordering information ugged minicord breakout TWINFLEX /FJ(ZN)Z /...(ZN)Z Please see age 162. Conformance TW F cables with 200 and OF meet OF T secification. 120

118 ndustry ink TW F and rugged minicord breakout cables Secification Cable tye Fiber tyes rugged minicord breakout 9 G50 G62 H200 Industry Link TWINFLEX G50 G62 Jacket Ø mm ingle fiber cable mm H200 Tube Ø mm POF980 Channel marking on single fiber numbered black and orange with arrows rox. weight kg/km Mechanical roerties Tensile strength during installation N C in service N Min. bend radius during installation mm C in service mm Crush resistance short-term N/dm C Imact resistance Reeated bending long-term N/dm W 1.5 W = 2.2 J r = 30 mm/10 kg r = 60 mm/1 kg imacts cycles C C Flexing r = 77 mm cycles HUBER+SUHNER 1) Flexing r = 70 mm r = 80 mm Torsion ± cycles C C C Thermal roerties Temerature range during installation C 20 to to to +70 C F1 in service C 40 to to to +70 in storage C 40 to to to +70 Combustion roerties Fire load MJ/m /65/ C ( o ) comliant Conformance PROFINET ecification 2) yes yes 1) Drag chain test 2) tandard with + marking. ccording to OF T secification with OF T marking ( OF T Tye C 2 200/230 or OF T Tye C 2 980/1000) 121

119 ndustry ink TW F glass-armoured breakout cables Proerties etal free indoor and outdoor cable For direct connector assembly with strain relief odent-rotected glass-armoured Easy striing ow smoke halogen free and self-extinguishing mro ed crush resistance For high thermal and mechanical stability rotected suitable for outdoor use ongitudinal and trans ersal watertight cable Alications For fixed installation Industrial Ethernet and LAN Machine cabling s control or data cable in factory automation ata cabling for harsh en ironment Connection to outdoor de ices F for alications in ol ing high safety re uirements in case of fire Design Cable design 2 single fiber cables with tight tubes train relief glass-armoured Jacket material LSFH acket colour black ccording to C Ordering information /...(ZNG)H /...( G) (otional) Please see age 163. Arovals UL listed acc. OFN/OFNG 122

120 ndustry ink TW F glass-armoured breakout cables Secification Cable tye Industry Link TWINFIX Fiber tyes 9. G50 G62 H200 POF980 Jacket Ø mm ingle fiber cable mm Tube Ø mm Channel marking on single fiber black and orange with arrows rox. weight kg/km Mechanical roerties Tensile strength during installation N C in service N Min. bend radius during installation mm C in service mm Crush resistance short-term N/dm C long-term N/dm Imact resistance W = 2.2 J imacts C Reeated bending r = 60 mm/1 kg cycles C Torsion ± 360 cycles C Water enetration h 1 m 24 d 3 m C F5 Thermal roerties Temerature range during installation C 10 to to to +60 C F1 in service C 40 to to to +70 in storage C 45 to to to +70 Combustion roerties Fire load MJ/m Fire roagation on a ertical cable bundle C Fire test with circuit integrity (CI) min 90 C alogen acid gas jacket material C egree of acidity jacket material C /65/ C ( o ) comliant Conformance PROFINET secification 1) yes yes ( ) o 305/2011 (C ) Dca-s1a, d0, a = assed 1) tandard black acket and with + marking. ccording to OF T secification with green acket and OF T marking ( OF T Tye B 2 200/230 or OF T Tye B 2P980/1000) 123

121 ndustry ink F glass-armoured breakout cables Proerties etal free indoor and outdoor cable odent-rotected glass-armoured For direct connector assembly with strain relief Easy striing -rotected suitable for outdoor use For high thermal and mechanical stability ow smoke halogen free and self-extinguishing mro ed crush resistance ongitudinal and trans ersal watertight cable Alications For fixed installation Industrial Ethernet and LAN s control or data cable in industrial lants Cabling in harsh en ironment conditions F for alications in ol ing high safety re uirements in case of fire Design Cable design 4 single fiber cables with tight tubes train relief glass-armoured Jacket material LSFH acket colour black ccording to C Ordering information 04- /F ( G) / ( G) - 22 Please see age 163. Arovals UL listed acc. OFN/OFNG 124

122 ndustry ink F glass-armoured breakout cables Secification Cable tye Industry Link QUADFIX Fiber tyes 9. G50 G62 H200 Jacket Ø mm 9 9 ingle fiber cable mm Tube Ø mm rox. weight kg/km Mechanical roerties Tensile strength during installation N C in service N Min. bend radius during installation mm C in service mm Crush resistance short-term N/dm C long-term N/dm Imact resistance W = 2.2 J imact C Water enetration h 1 m 24 h 3 m C F5 Thermal roerties Temerature range during installation C 10 to to +60 C F1 in service C 40 to to +70 in storage C 40 to to +70 Combustion roerties Fire load MJ/m Fire roagation on a ertical cable bundle C Fire test with circuit integrity (CI) min 180 C alogen acid gas jacket material C egree of acidity jacket material C /65/ C ( o ) comliant comliant ( ) o 305/2011 (C ) Cca-s1a, d0, a = assed 125

123 obile field cables Proerties High tensile strength For direct connector assembly xcellent coiling caability High chemical resistance against acids and alkalies For high mechanical and thermal stability alogen free and non-corrosi e fire gases mro ed crush resistance -rotected suitable for outdoor use etal free Easy striing igh tensile strength high abrasion and cut resistance Alications Fixed or mobile data cabling ( T mobile) ata cabling for harsh en ironment ilitary tactical field use Field ideo broadcast Machine cabling, drag chains Design Cable design and 12 tight tubes train relief aramide yarn Jacket material TPU acket colour black ccording to C Ordering information 02- /F ( ) /F ( ) /F ( ) /F ( ) - 80 Please see age

124 obile field cables Secification umber of Fiber Jacket Ø mm Tube Ø mm coloured rox. weight kg/km Mechanical roerties Tensile strength during installation N C in service N Min. bend radius during installation mm C in service mm Crush resistance short-term E9 G50 Reeated bending Flexing long-term r 50 mm weight 2 kg r 80 mm weight 5 kg r=100 mm, weight = 1 kg r=120 mm, weight = 2 kg r 80 mm weight 1.5 kg E9 G50 N/dm N/dm cycles cycles C C C Imact resistance W = 2.21 J imacts C Coiling caability Torsion length 500 m/r 45 mm length 500 m/r 80 mm length= 100 m/r=80 mm 1440 l 1000 mm ± 360, l = 1000 mm cycles 5 5 cycles HUBER+SUHNER C F5B C Thermal roerties Temerature range during installation C 45 to +85 C F1 in service C 60 to +85 in storage C 60 to +85 Combustion roerties Fire load MJ/m /65/ C ( o ) comliant = assed 127

125 Glass-armoured riser cables 2 fibers Proerties etal free indoor and outdoor cable odent-rotected glass-armoured For ertical acications For direct connector assembly alogen free and self-extinguishing ow fire load for high safety re uirements ongitudinal and trans ersal watertight cable Alications For FTT installation ata cable in distribution networks Design Cable design train relief and rodent rotection Jacket material acket colour 2 tight tubes glass-armoured LSFH black ccording to C Ordering information 02- /F( G) /F( G) /F( G) - 70 Please see age 164. Arovals UL listed acc. OFNR 128

126 Glass-armoured riser cables 2 fibers Secification umber of fibers Jacket Ø mm Tube Ø mm coloured rox. weight kg/km Mechanical roerties Tensile strength during installation N C in service N Min. bend radius 1) during installation mm C in service mm Crush resistance SM short-term N/dm C long-term N/dm Crush resistance MM short-term N/dm C long-term N/dm Water enetration h 1 m 24 h 3 m C F5B Thermal roerties Temerature range during installation C 40 to to to +75 C F1 in service C 40 to to to +75 in storage C 40 to to to +75 Combustion roerties Fire load MJ/m Fire roagation on a ertical single cable IEC on a ertical cable bundle C on a ertical cable bundle UL 1666 alogen acid gas C egree of acidity C /65/ C ( o ) comliant ( ) o 305/2011 (C ) * ** *** * Dca-s2, d0, a1 ** Dca-s1a, d0, a1 *** Dca-s1a, d1, a1 1) maller bending radius are ossible with 9/125 owbend ( T G.657) and G50/125-O 3/O 4 BendOtimi ed. 129

127 Glass-armoured riser cables 4 fibers Proerties etal free indoor and outdoor cable odent-rotected glass-armoured icord for easy acked remo al For direct connector assembly ow smoke halogen free and self-extinguishing ow fire load for high safety re uirements ongitudinal and trans ersal watertight cable Alications For FTT installation ata cable in distribution networks Design Cable design train relief and rodent rotection Jacket material acket colour central strength member (non metallic) 4 tight tubes 1 ricord glass-armoured LSFH black ccording to C Ordering information /F ( G) Please see age

128 Glass-armoured riser cables 4 fibers Secification Fiber tyes E9 G50 G62 umber of fiber 4 4 Jacket Ø mm Tube Ø mm coloured rox. weight kg/km Mechanical roerties Tensile strength during installation N C in service N Min. bend radius 1) during installation mm C in service mm Crush resistance short-term N/dm C long-term N/dm Imact resistance W 1.53 imacts C Reeated bending r 40 mm weight 1 kg cycles C Flexing r 100 mm weight 1.5 kg cycles C Torsion ± 360, l = 1000 mm cycles C Water enetration h 1 m 24 h 3 m C F5B Thermal roerties Temerature range during installation C 25 to to +75 C F1 in service C 40 to to +75 in storage C 40 to to +75 Combustion roerties Fire load MJ/m Fire roagation on a ertical single cable IEC on a ertical cable bundle C on a ertical cable bundle UL 1666 alogen acid gas jacket material C egree of acidity jacket material C /65/ C ( o ) comliant = assed 1) maller bending radius are ossible with 9/125 owbend ( T G.657) and G50/125-O 3/O 4 BendOtimi ed. 131

129 ugged multi-fiber loose tube u to 24 fibers ( elly-free) Proerties etal and elly free cable odent-rotected glass-armoured For mobile alications o need for cleaning the fibers ongitudinal and trans ersal watertight cable Alications Fixed or mobile data cabling ata cabling for harsh en ironment Machine cabling, drag chains Design Cable design train relief and rodent rotection Jacket material acket colour dry multi-fiber loose tube with 2 u to 24 fibers glass-ro ing TPU black ccording to C Ordering information / ( G) Please see age

130 ugged multi-fiber loose tube u to 24 fibers ( elly-free) Secification umber of fiber mm 2 to 24 Jacket Ø mm 7.0 Tube Ø mm 2.8 coloured rox. weight kg/km 44 Mechanical roerties Tensile strength during installation N 2500 C in service N 1500 Min. bend radius during installation mm 50 C in service mm 70 Crush resistance short-term N/dm 9000 C long-term N/dm 2000 Imact resistance W 1.5 imacts 100 C Reeated bending r 50 mm weight 2 kg cycles C Flexing r = 120 mm elocity 1.4 m/s cycles C Water enetration h 1 m 24 h 3 m C F5B Thermal roerties Temerature range during installation C 25 to +70 C F1 in service C 45 to +85 in storage C 45 to +85 Combustion roerties Fire load MJ/m /65/ C ( o ) comliant 133

131 Drag chain cables Proerties Strain relieved with aramide yarn For direct connector assembly High chemical resistance against acids and alkalies For high mechanical and thermal stability alogen free and non-corrosi e fire gases mro ed crush resistance etal free Alications edium to large drag chains Cabling in industrial alications s control or data cable in industry robots cranes roduction lines and automation systems Cable design allows for a ermanent load with more than one million drag chain cycles Design Cable design train relief and rodent rotection Jacket material acket colour u to 12 tight tubes strength member aramide yarn T (otional T flame retardant) black ccording to C Ordering information /FSN(ZN)YZ /F ( ) (Flame retardant outer acket) Please see age

132 Drag chain cables Secification Fiber tyes mm E9 G50 G62.5 Jacket Ø mm Tube Ø mm coloured rox. weight kg/km Mechanical roerties Tensile strength during installation N C in service N Min. bend radius during installation mm C in service mm Crush resistance short-term N/dm C long-term N/dm Reeated bending r 100 mm weight 5 kg cycles C Flexing Flexing r = 120 mm elocity 0.5 m/s L = 2.0 m r = 100 mm elocity 2 m/s L = 2.0 m cycles C cycles HUBER+SUHNER drag chain test Thermal roerties Temerature range during installation C 10 to to +50 C F1 in service C 40 to to +85 in storage C 40 to to +85 Combustion roerties Fire load MJ/m 3.49 Fire roagation on a ertical single cable * IEC /65/ C ( o ) comliant = assed only with T flame retardant outer acket 135

133 RADOX Drag chain cable Proerties Strain relieved with aramide yarn For direct connector assembly High chemical resistance against acids and alkalies For high mechanical and thermal stability alogen free and non-corrosi e fire gases mro ed crush resistance etal free Weld bead resistant calbe outer acket Alications edium to large drag chains Cabling in industrial alications s control or data cable in industry robots cranes roduction lines and automation systems Cable design allows for a ermanent load with more than one million drag chain cycles Design Cable design train relief and rodent rotection u to 12 tight tubes strength member aramide yarn Jacket material RADOX acket colour ccording to C black Ordering information /FSN(ZN)YR Please see age

134 Drag chain cable Secification Fiber tyes mm 9.G50 Jacket Ø mm 13 Tube Ø mm 0.9 coloured rox. weight kg/km 160 Mechanical roerties Tensile strength during installation N 4000 C in service N 2000 Min. bend radius during installation mm 200 C in service mm 100 Crush resistance short-term N/dm C long-term N/dm 5000 Reeated bending r 100 mm weight 5 kg cycles 5000 C Flexing r = 120 mm elocity 0.5 m/s L = 2.0 m cycles C Thermal roerties Temerature range during installation C 10 to +50 C F1 in service C 30 to +85 in storage C 40 to +85 Combustion roerties Fire load MJ/m 4.6 Fire roagation on a ertical single cable IEC /65/ C ( o ) comliant = assed 137

135 Hybrid cables ybrid breakout cable ybrid multi-fiber loose tube cable Proerties Custom designed cable configuration ach fiber strain relie ed High chemical resistance against acids and alkalies Tube can be stried u to 2 m in one iece For high mechanical re uirements ow smoke halogen free and self extinguishing ybrid multi-fiber loose tube cables are rodent rotected (glass armoured) Alications s data and ower cable for industry ideo tele-hone or customer-secific alications nstallation outdoors in moist wet cable ducts With LSFH acket ideal for alications in ol ing high safety re uirements in case of a fire (installation indoors) Design of hybrid breakout cables Cable design Conductor train relief Jacket material single fiber semi-tight tubes orange numbered 1.5 mm 2 u to 4 conductors aramide yarn LSFH acket colour black Design of hybrid multi-fiber loose tube cables Cable design multi-fiber loose tubes Conductor train relief Jacket material acket colour black 1.5 mm 2 u to 4 conductors 2.5 mm 2 u to 4 conductors glass-armouring (otional F ) ccording to C Ordering information ybrid breakout cables /CW ( ) C /CW ( ) C15 ybrid multi-fiber loose tube cables acket/ F bis /W ( G) C... bis /WSN(ZNG) C. ybrid cable order on re uest. 138

136 Hybrid cables Secification fiber otic comonents 4-way Breakout 8-way Breakout 5-way Multi-fiber loose tube 8-way Multi-fiber loose tube Jacket Ø mm ingle fiber cable /multi-fiber loose tube mm Channel marking on single fiber numbered coloured Secification conductor Outer conductor 1) 1.5 mm 2 mm 2.5 mm 2 mm ated oltage 0 /U 1.5 mm mm / /1000 Electrical resistance 1.5 mm 2 /km mm Jacket material O 125 halogen free Mechanical roerties Tensile strength during installation N C in service N Min. bend radius during installation mm C in service mm Crush resistance short-term N/dm C Imact resistance long-term N/dm r 25 mm W = 2.21 J 4.41 imacts C Thermal roerties Temerature range during installation C 10 to to +50 C F1 in service C 20 to to +70 in storage C 25 to to +70 Combustion roerties Fire roagation 2) 2) IEC /65/ C ( o ) comliant = assed Other hybrid cable tyes a ailable uon re uest. 1) Customer-secific order of colours for conductors. ailable colours are black red white blue yellow/green 2) Only alies to F acket material not assed 139

137 Order information for indoor cables Semi-tight tubes 0.9 mm available as standard only: 2000 m Item no. Cable tye Descrition E9/CH-E9-FE 1-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 0.9 mm, tube and fiber color: yellow E9A2/CH-E9-FG 1-fiber, 9/125 µm acc.g.657-a2, Ø 0.9 mm, tube color yellow and fiber color black G50/CH-D9-FD 1-fiber, 50/125 µm OM2, Ø 0.9 mm, tube and fiber color: orange G50/CH-M9-F-FM 1-fiber, 50/125 µm OM3 BendOtimized, Ø 0.9 mm, tube and fiber color: turquoise G50/CH-L9-G-FL 1-fiber, 50/125 µm OM4 BendOtimized, Ø 0.9 mm, tube and fiber color: heather violet G62/CH-C9-FC 1-fiber, 62.5/125 µm OM1, Ø 0.9 mm, tube and fiber color: blue On request: u to12 different colors for all different fiber tyes available; u to 24 different colors with ring marking for all different fiber tyes available. Tight tubes 0.9 mm available as standard only: 2000 m Item no. Cable tye Descrition E9/F-E9 1-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 0.9 mm, tube color: yellow E9/F-F9 1-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 0.9 mm, tube color white E9A2/F-E9-FG 1-fiber, 9/125 µm G.657-A2, Ø 0.9 mm, tube color: yellow E9A2/F-F9 1-fiber, 9/125 µm G.657-A2, Ø 0.9 mm, tube color: white G50/F-D9 1-fiber, 50/125 µm OM2, Ø 0.9 mm, tube color: orange G62/F-C9 1-fiber, 62.5/125 µm OM1, Ø 0.9 mm, tube color: blue Tight tubes 0.6 mm available as standard only: 2000 m Item no. Cable tye Descrition E9A2/V-T6-FA 1-fiber, 9/125 µm acc.g.657-a2, Ø 0.6 mm, tube color: red E9A2/V-T6-FB 1-fiber, 9/125 µm acc.g.657-a2, Ø 0.6 mm, tube color: green E9A2/V-T6-FE 1-fiber, 9/125 µm acc.g.657-a2, Ø 0.6 mm, tube color: yellow E9A2/V-T6-FC 1-fiber, 9/125 µm acc.g.657-a2, Ø 0.6 mm, tube color: blue 140

138 Order information for indoor cables Simlex cables 1.4 mm LSFH jacket with tight tube 0.6 mm Item no. Cable tye Descrition E9LB/VJH-E14 1-fiber, 9/125 µm acc.g.657-a2, Ø 1.4 mm, jacket LSFH yellow G50/VJH-M14-F 1-fiber, 50/125 µm OM3 BendOtimized, Ø 1.4 mm, jacket LSFH turquoise tbd 01-G50/VJH-L14-G 1-fiber, 50/125 µm OM4 BendOtimized, Ø 1.4 mm, jacket LSFH heather violet Simlex cables 1.7 mm LSFH jacket with semi-tight tube 0.9 mm Item no. Cable tye Descrition E9/CWJH-E17#D 1-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 1.7 mm, jacket LSFH yellow E9A2/CWJH-E17-FG#D 1-fiber, 9/125 µm acc.g.657-a2, Ø 1.7 mm, jacket LSFH yellow Simlex cables 2.0 mm LSFH jacket with semi-tight tube 0.9 mm Item no. Cable tye Descrition E9/CWJH-E20#D 1-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 2.0 mm, jacket LSFH yellow E9/CWJH-C20#D 1-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 2.0 mm, jacket LSFH blue E9A2/CWJH-E20-FG#D 1-fiber, 9/125 µm acc.itu-g.657-a2, Ø 2.0 mm, jacket LSFH yellow G50/CWJH-D20#D 1-fiber, 50/125 µm OM2, Ø 2.0 mm, jacket LSFH orange G50/CWJH-M20-F#D 1-fiber, 50/125 µm OM3 BendOtimized, Ø 2.0 mm, jacket LSFH turquoise G50/CWJH-L20-G#D 1-fiber, 50/125 µm OM4 BendOtimized, Ø 2.0 mm, jacket LSFH heather violet G62/CWJH-D20#D 1-fiber, 62.5/125 µm OM1, Ø 2.0 mm, jacket LSFH orange Simlex cables 2.4 mm LSFH jacket with semi-tight tube 0.9 mm Item no. Cable tye Descrition E9/CWJH-E24#D 1-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 2.4 mm, jacket LSFH yellow Simlex cables 2.7 mm LSFH jacket with semi-tight tube 0.9 mm Item no. Cable tye Descrition E9/CWJH-E27#D 1-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 2.4 mm, jacket LSFH yellow E9A2/CWJH-E27-FG#D 1-fiber, 9/125 µm acc.itu-g.657-a2, Ø 2.7 mm, jacket LSFH yellow G50/CWJH-D27#D 1-fiber, 50/125 µm OM2, Ø 2.7 mm, jacket LSFH orange G62/CWJH-D27#D 1-fiber, 62.5/125 µm OM1, Ø 2.7 mm, jacket LSFH orange 141

139 Order information for indoor cables Dulex cables figure mm LSFH jacket with tight tube 0.6 mm Item no. Cable tye Descrition E9/VJH-E14 2-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø mm, jacket LSFH yellow E9A2/VJH-E14-FG 2-fiber, 9/125 µm acc.g.657-a2, Ø mm, jacket LSFH yellow G50/VJH-M14-F 2-fiber, 50/125 µm OM3 BendOtimized, Ø mm, jacket LSFH turquoise G50/VJH-L14-G 2-fiber, 50/125 µm OM4 BendOtimized, Ø mm, jacket LSFH heather violet Dulex cables figure mm LSFH jacket with tight tube 0.9 mm Item no. Cable tye Descrition E9/FJH-E17 2-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø mm, jacket LSFH yellow E9A2/FJH-E17-FG 2-fiber, 9/125 µm acc.itu-g.657-a2, Ø mm, jacket LSFH yellow G50/FJH-D17 2-fiber, 50/125 µm OM2, Ø mm, jacket LSFH orange G50/FJH-M17-F 2-fiber, 50/125 µm OM3 BendOtimized, Ø mm, jacket LSFH turquoise G50/FJH-L17-G 2-fiber, 50/125 µm OM4 BendOtimized, Ø mm, jacket LSFH heather violet G62/FJH-D17 2-fiber, 62.5/125 µm OM1, Ø mm, jacket LSFH orange Dulex cables figure mm LSFH jacket with semi-tight tubes 0.9 mm Item no. Cable tye Descrition E9/CWJH-E17#D 2-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø mm, jacket LSFH yellow E9A2/CWJH-E17-FG#D 2-fiber, 9/125 µm acc.g.657-a2, Ø mm, jacket LSFH yellow G50/CWJH-M17-F#D 2-fiber, 50/125 µm OM3 BendOtimized, Ø mm, jacket LSFH turquoise Dulex cables figure mm LSFH jacket with semi-tight tube 0.9 mm Item no. Cable tye Descrition E9/CWJH-E20#D 2-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø mm, jacket LSFH yellow E9A2/CWJH-E20-FG#D 2-fiber, 9/125 µm acc.itu-g.657-a2, Ø mm, jacket LSFH yellow G50/CWJH-D20#D 2-fiber, 50/125 µm OM2, Ø mm, jacket LSFH orange G50/CWJH-M20-F#D 2-fiber, 50/125 µm OM3 BendOtimized, Ø mm, jacket LSFH turquoise G50/CWJH-L20-G#D 2-fiber, 50/125 µm OM4 BendOtimized, Ø mm, jacket LSFH heather violet G62/CWJH-D20#D 2-fiber, 62.5/125 µm OM1, Ø mm, jacket LSFH orange 142

140 Order information for indoor cables Dulex cables figure mm LSFH jacket with semi-tight tube 0.9 mm Item no. Cable tye Descrition E9/CWJH-E27#D 2-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø mm, jacket LSFH yellow G50/CWJH-D27#D 2-fiber, 50/125 µm OM2, Ø mm, jacket LSFH orange G50/CWJH-M27-F#D 2-fiber, 50/125 µm OM3 BendOtimized, Ø mm, jacket LSFH turquoise G62/CWJH-D27#D 2-fiber, 62.5/125 µm OM1, Ø mm, jacket LSFH orange Dulex cable figure mm LSFH jacket with tight tube 0.6 mm Item no. Cable tye Descrition E9/VJH-AE14 2-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø mm, jacket LSFH yellow E9A2/VJH-AE14-FG 2-fiber, 9/125 µm acc.g.657-a2, Ø mm, jacket LSFH yellow G50/VJH-AM14-F 2-fiber, 50/125 µm OM3 BendOtimized, Ø mm, jacket LSFH turquoise G50/VJH-AL14-G 2-fiber, 50/125 µm OM4 BendOtimized, Ø mm, jacket LSFH heather violet Dulex cables figure mm LSFH jacket with semi-tight tube 0.9 mm Item no. Cable tye Descrition E9/CWJH-AE20#D 2-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø mm, jacket LSFH yellow E9A2/CWJH-AE20-FG#D 2-fiber, 9/125 µm acc.itu-g.657-a2, Ø mm, jacket LSFH yellow G50/CWJH-AD20#D 2-fiber, 50/125 µm OM2, Ø mm, jacket LSFH orange G50/CWJH-AM20-F#D 2-fiber, 50/125 µm OM3 BendOtimized, Ø mm, jacket LSFH turquoise G50/CWJH-AL20-G#D 2-fiber, 50/125 µm OM4 BendOtimized, Ø mm, jacket LSFH heather violet G62/CWJH-AD20#D 2-fiber, 62.5/125 µm OM1, Ø mm, jacket LSFH orange Dulex cables figure mm LSFH jacket with semi-tight tube 0.9 mm Item no. Cable tye Descrition E9/CWJH-AE27#D 2-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø mm, jacket LSFH yellow G50/CWJH-AD27#D 2-fiber, 50/125 µm OM2, Ø mm, jacket LSFH orange G50/CWJH-AM27-F#D 2-fiber, 50/125 µm OM3 BandOtimized, Ø mm, jacket LSFH turquoise G62/CWJH-AD27#D 2-fiber, 62.5/125 µm OM1, Ø mm, jacket LSFH orange Dulex cables round 2.1 mm LSFH jacket with tight tube 0.6 mm for LC Uniboot Item no. Cable tye Descrition E9A2/V(ZN)H-E21#D 2-fiber, 9/125 µm acc.itu-g.657-a2, Ø 2.1 mm, jacket LSFH yellow G50/V(ZN)H-M21-F#D 2-fiber, 50/125 µm OM3 BandOtimized, Ø 2.1 mm, jacket LSFH turquoise G50/V(ZN)H-L21-G#D 2-fiber, 50/125 µm OM4 BandOtimized, Ø 2.1 mm, jacket LSFH heather violet 143

141 Order information for indoor cables Otiack 8-2.0mm Multi-fiber atch cable LSFH jacket with 8 fibers for MTP /MPO Item no. Cable tye Descrition E9A2/(ZN)H-E20_TIA#D Otiack cable Ø 2.0mm, 8 x 9/125µm G.657.A2, LSFH yellow, TIA fiber colour code G50/(ZN)H-M20-F_TIA#D Otiack cable Ø 2.0mm, 8 x 50/125µm OM3, LSFH turquoise, TIA fiber colour code G50/(ZN)H-L20-G_TIA#D Otiack cable Ø 2.0mm, 8 x 50/125µm OM4, LSFH heather violet, TIA fiber colour code Otiack mm Multi-fiber atch cable LSFH jacket with 12 fibers for MTP /MPO Item no. Cable tye Descrition E9A2/(ZN)H-E20#D Otiack cable Ø 2.0mm, 12 x 9/125µm G.657.A2, LSFH yellow G50/(ZN)H-M20-F#D Otiack cable Ø 2.0mm, 12 x 50/125µm OM3, LSFH turquoise G50/(ZN)H-L20-G#D Otiack cable Ø 2.0mm, 12 x 50/125µm OM4, LSFH heather violet Otiack mm Multi-fiber atch cable LSFH jacket with 12 fibers for MTP /MPO Item no. Cable tye Descrition E9A2/(ZN)H-E30#D 12-fiber, 9/125 µm acc.g.657-a2, Ø 3.0 mm, jacket LSFH yellow G50/(ZN)H-M30-F OM3#D 12-fiber, 50/125 µm OM3 BendOtimized, Ø 3.0 mm, jacket LSFH turquoise G50/(ZN)H-L30-G OM4#D 12-fiber, 50/125 µm OM4 BendOtimized, Ø 3.0 mm, jacket LSFH heather violet Otiack mm Multi-fiber atch cable LSFH jacket with 24 fibers for MTP /MPO Item no. Cable tye Descrition E9A2/(ZN)H-E36#D 24-fiber, 9/125 µm acc.g.657-a2, Ø 3.6 mm, jacket LSFH yellow G50/(ZN)H-M36-F OM3#D 24-fiber, 50/125 µm OM3 BendOtimized, Ø 3.6 mm, jacket LSFH turquoise G50/(ZN)H-L36-G OM4#D 24-fiber, 50/125 µm OM4 BendOtimized, Ø 3.6 mm, jacket LSFH heather violet Breakout cable 1.4 mm LSFH jacket with tight tube 0.6 mm Item no. Cable tye Descrition E9/VJSNH-E14#D 12-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 9 mm, jacket LSFH yellow G50/VJSNH-M14-F OM3#D 12-fiber, 50/125 µm OM3 BendOtimized, Ø 9 mm, jacket LSFH turquoise G50/VJSNH-L14-G OM4#D 12-fiber, 50/125 µm OM4 BendOtimized, Ø 9 mm, jacket LSFH heather violet E9/VJSNH-E14#D 16-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 9 mm, jacket LSFH yellow E9/VJSNH-E14#D 18-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 9.5 mm, jacket LSFH yellow E9/VJSNH-E14#C 24-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 10.6 mm, jacket LSFH yellow E9A2/VJSNH-E14#C 24-fiber, 9/125 µm acc.itu-g.657-a2, Ø 10.6 mm, jacket LSFH yellow G50/VJSNH-M14-F OM3#C 24-fiber, 50/125 µm OM3 BendOtimized, Ø 10.6 mm, jacket LSFH turquoise G50/VJSNH-L14-G OM4#D 24-fiber, 50/125 µm OM4 BendOtimized, Ø 10.6 mm, jacket LSFH heather violet 144

142 Order information for indoor cables Breakout cables 2.0 mm LSFH jacket with semi-tight tube 0.9 mm Item no. Cable tye Descrition E9/CWJSNH-E20#D 4-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 7 mm, jacket LSFH yellow G50/CWJSNH-D20#D 4-fiber, 50/125 µm OM2, Ø 7 mm, jacket LSFH orange G50/CWJSNH-M20-F#D 4-fiber, 50/125 µm OM3 BendOtimized, Ø 7 mm, jacket LSFH turquoise G50/CWJSNH-L20-G#D 4-fiber, 50/125 µm OM4 BendOtimized, Ø 7 mm, jacket LSFH heather violet G62/CWJSNH-D20#D 4-fiber, 62/125 µm OM1, Ø 7 mm, jacket LSFH orange E9/CWJSNH-E20#C 8-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 7 mm, jacket LSFH yellow G50/CWJSNH-D20#C 8-fiber, 50/125 µm OM2, Ø 9 mm, jacket LSFH orange G50/CWJSNH-M20-F#C 8-fiber, 50/125 µm OM3 BendOtimized, Ø 9 mm, jacket LSFH turquoise G50/CWJSNH-L20-G#C 8-fiber, 50/125 µm OM4 BendOtimized, Ø 9 mm, jacket LSFH heather violet G62/CWJSNH-D20#C 8-fiber, 62/125 µm OM1, Ø 9 mm, jacket LSFH orange E9/CWJSNH-E20#C 12-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 12 mm, jacket LSFH yellow E9A2/CWJSNH-E20-FG#C 12-fiber, 9/125 µm acc.g.657-a2, Ø 12 mm, jacket LSFH yellow G50/CWJSNH-D20#C 12-fiber, 50/125 µm OM2, Ø 12 mm, jacket LSFH orange G50/CWJSNH-M20-F#C 12-fiber, 50/125 µm OM3 BendOtimized, Ø 12 mm, jacket LSFH turquoise G50/CWJSNH-L20-G#C 12-fiber, 50/125 µm OM4 BendOtimized, Ø 12 mm, jacket LSFH heather violet G62/CWJSNH-D20#C 12-fiber, 62/125 µm OM1, Ø 12 mm, jacket LSFH orange E9/CWJSNH-E20#C 24-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 12 mm, jacket LSFH yellow Breakout cables fire resistance 2.0 mm LSFH jacket with semi-tight tube 0.9 mm Item no. Cable tye Descrition E9/CWJSNHIH-E20 4-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 10 mm, jacket LSFH yellow G50/CWJSNHIH-D20 4-fiber, 50/125 µm OM2, Ø 10 mm, jacket LSFH orange G50/CWJSNHIH-L20-G 4-fiber, 50/125 µm OM4 BendOtimized, Ø 10 mm, jacket LSFH heather violet G62/CWJSNHIH-D20 4-fiber, 62/125 µm OM1, Ø 10 mm, jacket LSFH orange E9/CWJSNHIH-E20 8-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 12 mm, jacket LSFH yellow G50/CWJSNHIH-D20 8-fiber, 50/125 µm OM2, Ø 12 mm, jacket LSFH orange G50/CWJSNHIH-L20-G 8-fiber, 50/125 µm OM4 BendOtimized, Ø 12 mm, jacket LSFH heather violet G62/CWJSNHIH-D20 8-fiber, 62/125 µm OM1, Ø 12 mm, jacket LSFH orange E9/CWJSNHIH-E20 12-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 15 mm, jacket LSFH yellowt G50/CWJSNHIH-D20 12-fiber, 50/125 µm OM2, Ø 15 mm, jacket LSFH orange G50/CWJSNHIH-L20-G 12-fiber, 50/125 µm OM4 BendOtimized, Ø 15 mm, jacket LSFH heather violet G62/CWJSNHIH-D20 12-fiber, 62/125 µm OM1, Ø 15 mm, jacket LSFH orange 145

143 Order information for indoor cables Otiack 8 - breakout mm u to 96 Multi-fiber breakout cable LSFH jacket with 8 fibers for MTP /MPO Item no. Cable tye Descrition G50/(ZN)SNH-M20-F_TIA Otiack breakout cable 2.0mm / Ø 6.6mm, 24 x 50/125µm OM3, LSFH turquoise, TIA fiber colour code G50/(ZN)SNH-L20-G_TIA Otiack breakout cable 2.0mm / Ø 6.6mm, 24 x 50/125µm OM4, LSFH heather violet, TIA fiber colour code E9A2/(ZN)SNH-E20_TIA Otiack breakout cable 2.0mm / Ø 7.6mm, 48 x 9/125µm G.657.A2, LSFH yellow, TIA fiber colour code G50/(ZN)SNH-M20-F_TIA Otiack breakout cable 2.0mm / Ø 7.6mm, 48 x 50/125µm OM3, LSFH turquoise, TIA fiber colour code G50/(ZN)SNH-L20-G_TIA Otiack breakout cable 2.0mm / Ø 7.6mm, 48 x 50/125µm OM4, LSFH heather violet, TIA fiber colour code E9A2/(ZN)SNH-E20_TIA Otiack breakout cable 2.0mm / Ø 10.3mm, 96 x 9/125µm G.657.A2, LSFH yellow, TIA fiber colour code G50/(ZN)SNH-M20-F_TIA Otiack breakout cable 2.0mm / Ø 10.3mm, 96 x 50/125µm OM3, LSFH turquoise, TIA fiber colour code G50/(ZN)SNH-L20-G_TIA Otiack breakout cable 2.0mm / Ø 10.3mm, 96 x 50/125µm OM4, LSFH heather violet, TIA fiber colour code Otiack 12 breakout 3.0 mm u to 144 Multi-fiber breakout cable LSFH jacket with 12 fibers for MTP / MPO Item no. Cable tye Descrition E9A2/(ZN)SNH-E20 Otiack breakout cable 2.0mm / Ø 6.6mm, 24 x 9/125µm G.657.A2, LSFH yellow E9A2/(ZN)SNH-E20 Otiack breakout cable 2.0mm / Ø 6.6mm, 48 x 9/125µm G.657.A2, LSFH yellow G50/(ZN)SNH-M20-F Otiack breakout cable 2.0mm / Ø 6.6mm, 48 x 50/125µm OM3, LSFH turquoise G50/(ZN)SNH-L20-G Otiack breakout cable 2.0mm / Ø 6.6mm, 48 x 50/125µm OM4, LSFH heather violet E9A2/(ZN)SNH-E20 Otiack breakout cable 2.0mm / Ø 7.6mm, 72 x 9/125µm G.657.A2, LSFH yellow G50/(ZN)SNH-M20-F Otiack breakout cable 2.0mm / Ø 7.6mm, 72 x 50/125µm OM3, LSFH turquoise G50/(ZN)SNH-L20-G Otiack breakout cable 2.0mm / Ø 7.6mm, 72 x 50/125µm OM4, LSFH heather violet E9A2/(ZN)SNH-E20 Otiack breakout cable 2.0mm / Ø 9.2mm, 96 x 9/125µm G.657.A2, LSFH yellow G50/(ZN)SNH-L20-G Otiack breakout cable 2.0mm / Ø 9.2mm, 96 x 50/125µm OM4, LSFH heather violet E9A2/(ZN)SNH-E20 Otiack breakout cable 2.0mm / Ø 10.3mm, 144 x 9/125µm G.657.A2, LSFH yellow G50/(ZN)SNH-M20-F Otiack breakout cable 2.0mm / Ø 10.3mm, 144 x 50/125µm OM3, LSFH turquoise G50/(ZN)SNH-L20-G Otiack breakout cable 2.0mm / Ø 10.3mm, 144 x 50/125µm OM4, LSFH heather violet Otiack 24 breakout 3.6 mm u to 288 Multi-fiber breakout cable LSFH jacket with 24 fibers for MTP /MPO Item no. Cable tye Descrition E9A2/(ZN)SNH-E30 Otiack breakout cable 3.0mm / Ø 9.3mm, 48 x 9/125µm G.657.A2, LSFH yellow G50/(ZN)SNH-L30-G Otiack breakout cable 3.0mm / Ø 9.3mm, 48 x 50/125µm OM4, LSFH heather violet E9A2/(ZN)SNH-E30 Otiack breakout cable 3.0mm / Ø 9.3mm, 96 x 9/125µm G.657.A2, LSFH yellow G50/(ZN)SNH-L30-G Otiack breakout cable 3.0mm / Ø 9.3mm, 96 x 50/125µm OM4, LSFH heather violet E9A2/(ZN)SNH-E30 Otiack breakout cable 3.0mm / Ø 11.0mm, 144 x 9/125µm G.657.A2, LSFH yellow G50/(ZN)SNH-L30-G Otiack breakout cable 3.0mm / Ø 11.0mm, 144 x 50/125µm OM4, LSFH heather violet FTTH Simlex cables 2.7 mm LSFH jacket with semi-tight tube 0.9 mm Item no. Cable tye Descrition E9A2/CWJH-H27-FG#D 1-fiber, 9/125 µm acc.itu-g.657-a2, Ø 2.7 mm, jacket LSFH light grey E9A3/CWJH-F27-FG_blank#D 1-fiber, 9/125 µm acc.itu-g.657-a2/b3, Ø 2.7 mm, jacket LSFH white, no labelling 146

144 Order information for indoor cables Riser cables (mini breakout) LSFH jacket with tight tube 0.9 mm Item no. Cable tye Descrition E9/FSN(ZN)H-G50 4-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 5 mm, jacket LSFH black G50/FSN(ZN)H-G50 4-fiber, 50/125 µm OM2, Ø 5 mm, jacket LSFH black G50/FSN(ZN)H-G50-F 4-fiber, 50/125 µm OM3 BendOtimized, Ø 5 mm, jacket LSFH black G50/FSN(ZN)H-G50-G 4-fiber, 50/125 µm OM4 BendOtimized, Ø 5 mm, jacket LSFH black G62/FSN(ZN)H-G50 4-fiber, 62.5/125 µm OM1, Ø 5 mm, jacket LSFH black E9/FSN(ZN)H-G70#D 12-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 7 mm, jacket LSFH black E9/FSN(ZN)H-E70#D 12-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 7 mm, jacket LSFH yellow G50/FSN(ZN)H-G70#D 12-fiber, 50/125 µm OM2, Ø 7 mm, jacket LSFH black G50/FSN(ZN)H-M70-F#D 12-fiber, 50/125 µm OM3 BendOtimized, Ø 7 mm, jacket LSFH turquoise G50/FSN(ZN)H-L70-G#D 12-fiber, 50/125 µm OM4 BendOtimized, Ø 7 mm, jacket LSFH heather violet G62/FSN(ZN)H-G70#D 12-fiber, 62.5/125 µm OM1, Ø 7 mm, jacket LSFH black E9/FSN(ZN)H-G88 24-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 8.8 mm, jacket LSFH black E9/FSN(ZN)H-E88 24-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 8.8 mm, jacket LSFH yellow G50/FSN(ZN)H-G88 24-fiber, 50/125 µm OM2, Ø 8.8 mm, jacket LSFH black G50/FSN(ZN)H-G88-F 24-fiber, 50/125 µm OM3 BendOtimized, Ø 8.8 mm, jacket LSFH black G50/FSN(ZN)H-G88-G 24-fiber, 50/125 µm OM4 BendOtimized, Ø 8.8 mm, jacket LSFH black G50/FSN(ZN)H-L88-G 24-fiber, 50/125 µm OM4 BendOtimized, Ø 8.8 mm, jacket LSFH heather violet G62/FSN(ZN)H-G88 24-fiber, 62.5/125 µm OM1, Ø 8.8 mm, jacket LSFH black FTTH Microtube cables 2.3 mm LSFH jacket u to 4 fibers Item no. Cable tye Descrition E9A2/MH(ZN)H-H23#D 4-fiber, 9/125 µm acc.g.657-a2, Ø 2.3 mm, jacket LSFH light grey E9A2/MH(ZN)H-E23#D 4-fiber, 9/125 µm acc.g.657-a2, Ø 2.3 mm, jacket LSFH yellow FTTH Indoor cables 2.8 mm LSFH jacket with tight tube 0.6 mm Item no. Cable tye Descrition E9A2/V(ZN)H-H28#D 4-fiber, 9/125 µm acc.g.657-a2, Ø 2.8 mm, jacket LSFH light grey E9A2/V(ZN)H-E28#D 4-fiber, 9/125 µm acc.g.657-a2, Ø 2.8 mm, jacket LSFH yellow FTTH Indoor HOMESTAR cables 4.8 mm LSFH jacket with tight tube 0.9 mm Item no. Cable tye Descrition E9/F(ZN)H-H48 1-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 4.8 mm, jacket LSFH light grey E9/FSN(ZN)H-H48 2-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 4.8 mm, jacket LSFH light grey E9/FSN(ZN)H-H48 4-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 4.8 mm, jacket LSFH light grey 147

145 Order information for universal cables Jellyfree dry block non-armoured multi-fiber loose tube cables u to 12 fibers with LSFH jacket 3.5 mm Item no. Cable tye Descrition E9/BQ(ZN)H-E35 12-fiber, 9/125 µm acc.g.652.d, Ø 3.5 mm, jacket LSFH yellow E9/BQ(ZN)H-G35 12-fiber, 9/125 µm acc.g.652.d, Ø 3.5 mm, jacket LSFH black G50/BQ(ZN)H-D35 12-fiber, 50/125 µm OM2, Ø 3.5 mm, jacket LSFH orange G50/BQ(ZN)H-G35 12-fiber, 50/125 µm OM2, Ø 3.5 mm, jacket LSFH black G50/BQ(ZN)H-M35-F 12-fiber, 50/125 µm OM3 BendOtimized, Ø 3.5 mm, jacket LSFH turquoise G50/BQ(ZN)H-L35-G 12-fiber, 50/125 µm OM4 BendOtimized, Ø 3.5 mm, jacket LSFH heather violet G62/BQ(ZN)H-D35 12-fiber, 62.5/125 µm OM1, Ø 3.5 mm, jacket LSFH orange Jellyfree dry block non-armoured multi-fiber loose tube cables u to 24 fibers with LSFH jacket 5.0 mm Item no. Cable tye Descrition E9/Q(ZN)H-E50 12-fiber, 9/125 µm acc.g.652.d, Ø 5.0 mm, jacket LSFH yellow G50/Q(ZN)H-D50 12-fiber, 50/125 µm OM2, Ø 5.0 mm, jacket LSFH orange G50/Q(ZN)H-M50-F 12-fiber, 50/125 µm OM3 BendOtimized, Ø 5.0 mm, jacket LSFH turquoise G50/Q(ZN)H-L50-G 12-fiber, 50/125 µm OM4 BendOtimized, Ø 5.0 mm, jacket LSFH heather violet G62/Q(ZN)H-D50 12-fiber, 62.5/125 µm OM1, Ø 5.0 mm, jacket LSFH orange E9/Q(ZN)H-E50 24-fiber, 9/125 µm acc.g.652.d, Ø 5.0 mm, jacket LSFH yellow G50/Q(ZN)H-D50 24-fiber, 50/125 µm OM2, Ø 5.0 mm, jacket LSFH orange G50/Q(ZN)H-M50-F 24-fiber, 50/125 µm OM3 BendOtimized, Ø 5.0 mm, jacket LSFH turquoise G50/Q(ZN)H-L50-G 24-fiber, 50/125 µm OM4 BendOtimized, Ø 5.0 mm, jacket LSFH heather violet G62/Q(ZN)H-D50 24-fiber, 62.5/125 µm OM1, Ø 5.0 mm, jacket LSFH orange 148

146 Order information for universal cables Jellyfree dry block glass-armoured multi-fiber loose tube cables u to 24 fibers with LSFH jacket 7.0 mm Item no. Cable tye Descrition E9/Q(ZNG)H-G70#D 12-fiber, 9/125 µm acc.g.652.d, Ø 7.0 mm, jacket LSFH black E9A2/Q(ZNG)H-G70#D 12-fiber, 9/125 µm acc.g.657-a2, Ø 7.0 mm, jacket LSFH black E9A2/Q(ZNG)H-G70-UR 12-fiber, 9/125 µm acc.g.657-a2, Ø 7.0 mm, jacket LSFH black UL rating acc.ofn/ofng G50/Q(ZNG)H-G70#D 12-fiber, 50/125 µm OM2, Ø 7.0 mm, jacket LSFH black G50/Q(ZNG)H-G70-UR 12-fiber, 50/125 µm OM2, Ø 7.0 mm, jacket LSFH black UL rating acc.ofn/ofng G50/Q(ZNG)H-G70-F#D 12-fiber, 50/125 µm OM3 BendOtimized, Ø 7.0 mm, jacket LSFH black G50/Q(ZNG)H-G70-F-UR 12-fiber, 50/125 µm OM3 BendOtimized, Ø 7.0 mm, jacket LSFH black UL rating acc.ofn/ofng G50/Q(ZNG)H-G70-G#D 12-fiber, 50/125 µm OM4 BendOtimized, Ø 7.0 mm, jacket LSFH black G50/Q(ZNG)H-G70-G-UR 12-fiber, 50/125 µm OM4 BendOtimized, Ø 7.0 mm, jacket LSFH black UL rating acc.ofn/ofng G62/Q(ZNG)H-G70#D 12-fiber, 62.5/125 µm OM1, Ø 7.0 mm, jacket LSFH black G62/Q(ZNG)H-G70-UR 12-fiber, 62.5/125 µm OM1, Ø 7.0 mm, jacket LSFH black UL rating acc.ofn/ofng E9/Q(ZNG)H-G70#D 24-fiber, 9/125 µm acc. G.652.D, Ø 7.0 mm, jacket LSFH black E9A2/Q(ZNG)H-G70#D 24-fiber, 9/125 µm acc.g.657-a2, Ø 7.0 mm, jacket LSFH black G50/Q(ZNG)H-G70#D 24-fiber, 50/125 µm OM2, Ø 7.0 mm, jacket LSFH black G62/Q(ZNG)H-G70#D 24-fiber, 62.5/125 µm OM1, Ø 7.0 mm, jacket LSFH black Jellyfree dry block glass-armoured multi-fiber loose tube cables - u to 24 fibers with LSFH jacket 8.5 mm Item no. Cable tye Descrition E9/Q(ZNG)H-G85#D Jellyfree glass-armoured multi-fiber loose-tube cable Ø 8.5mm, 4 x 9/125µm G.652.D, loose tube 2.8mm, LSFH black G50/Q(ZNG)H-G85-G#D Jellyfree glass-armoured multi-fiber loose-tube cable Ø 8.5mm, 4 x 50/125µm OM4, loose tube 2.8mm, LSFH black E9/Q(ZNG)H-G85#D Jellyfree glass-armoured multi-fiber loose-tube cable Ø 8.5mm, 12 x 9/125µm G.652.D, loose tube 2.8mm, LSFH black G50/Q(ZNG)H-G85-G#D Jellyfree glass-armoured multi-fiber loose-tube cable Ø 8.5mm, 12 x 50/125µm OM4, loose tube 2.8mm, LSFH black E9/Q(ZNG)H-G85#D Jellyfree glass-armoured multi-fiber loose-tube cable Ø 8.5mm, 24 x 9/125µm G.652.D, loose tube 2.8mm, LSFH black G50/Q(ZNG)H-G85-G#D Jellyfree glass-armoured multi-fiber loose-tube cable Ø 8.5mm, 24 x 50/125µm OM4, loose tube 2.8mm, LSFH black Jellyfree dry block TWINTUBE glass-armoured multi-fiber loose tube cables - u to 48 fibers with LSFH jacket 9.4 mm Item no. Cable tye Descrition E9/Q(ZNG)H-E94#D Jellyfree TWINTUBE glass-armoured multi-fiber loose-tube cable Ø 9.4mm, 24 x 9/125µm G.652.D, loose tube 2.8mm, LSFH yellow G50/Q(ZNG)H-L94-G#D Jellyfree TWINTUBE glass-armoured multi-fiber loose-tube cable Ø 9.4mm, 24 x 50/125µm OM4, loose tube 2.8mm, LSFH heather violet 149

147 Order information for universal cables Jellyfree - dry block glass-armoured multi-fiber loose tube cables - u to 24 fibers with LSFH jacket 12.0 mm Item no. Cable tye Descrition E9/Q(ZNG)H-E120#B Jellyfree glass-armoured multi-fiber loose-tube cable Ø 12.0mm, 12 x 9/125µm G.652.D, loose tube 2.8mm, LSFH black Jellyfree - glass-armoured multi-fiber loose tube cables - u to 144 fibers with LSFH jacket Item no. Cable tye Descrition E9/BQSN(ZNG)H-G96#D Jellyfree glass-armoured multi-fiber loose-tube cable Ø 9.6mm, 48 x 9/125µm G.652.D, loose tube 2.2mm, LSFH black E9/BQSN(ZNG)H-E96#D Jellyfree glass-armoured multi-fiber loose-tube cable Ø 9.6mm, 48 x 9/125µm G.652.D, loose tube 2.2mm, LSFH yellow G50/BQSN(ZNG)H-M96-F#D Jellyfree glass-armoured multi-fiber loose-tube cable Ø 9.6mm, 48 x 50/125µm OM3, loose tube 2.2mm, LSFH turquoise G50/BQSN(ZNG)H-L96-G#D Jellyfree glass-armoured multi-fiber loose-tube cable Ø 9.6mm, 48 x 50/125µm OM4, loose tube 2.2mm, LSFH heather violet E9/BQSN(ZNG)H-G106#D Jellyfree glass-armoured multi-fiber loose-tube cable Ø 10.6mm, 72 x 9/125µm G.652.D, loose tube 2.2mm, LSFH black G50/BQSN(ZNG)H-G106-G#D Jellyfree glass-armoured multi-fiber loose-tube cable Ø 10.6mm, 72 x 50/125µm OM4, loose tube 2.2mm, LSFH heather black E9/BQSN(ZNG)H-G122#D Jellyfree glass-armoured multi-fiber loose-tube cable Ø 12.2mm, 96 x 9/125µm G.652.D, loose tube 2.2mm, LSFH black E9/BQSN(ZNG)H-E122#D Jellyfree glass-armoured multi-fiber loose-tube cable Ø 12.2mm, 96 x 9/125µm G.652.D, loose tube 2.2mm, LSFH yellow G50/BQSN(ZNG)H-G122-G#D Jellyfree glass-armoured multi-fiber loose-tube cable Ø 12.2mm, 96 x 50/125µm OM4, loose tube 2.2mm, LSFH black G50/BQSN(ZNG)H-L122-G#D Jellyfree glass-armoured multi-fiber loose-tube cable Ø 12.2mm, 96 x 50/125µm OM4, loose tube 2.2mm, LSFH heather violet E9/BQSN(ZNG)H-G145#E Jellyfree glass-armoured multi-fiber loose-tube cable Ø 14.5mm, 144 x 9/125µm G.652.D, loose tube 2.2mm, LSFH black G50/BQSN(ZNG)H-G145-G#E Jellyfree glass-armoured multi-fiber loose-tube cable Ø 14.5mm, 144 x 50/125µm OM4, loose tube 2.2mm, LSFH black 150 HUBER+SUHNER Wireless infrastructure

148 Order information for universal cables Non-armoured multi-fiber loose tube cables u to 12 fibers with LSFH jacket 3.5 mm Item no. Cable tye Descrition E9/BW(ZN)H-G35 4-fiber, 9/125 µm acc.g.652.d, Ø 3.5 mm, jacket LSFH black G50/BW(ZN)H-G35 4-fiber, 50/125 µm OM2, Ø 3.5 mm, jacket LSFH black G50/BW(ZN)H-G35-F 4-fiber, 50/125 µm OM3 BendOtimized, Ø 3.5 mm, jacket LSFH black G62/BW(ZN)H-G35 4-fiber, 62.5/125 µm OM1, Ø 3.5 mm, jacket LSFH black E9/BW(ZN)H-G35 12-fiber, 9/125 µm acc.g.652.d, Ø 3.5 mm, jacket LSFH black G50/BW(ZN)H-G35 12-fiber, 50/125 µm OM2, Ø 3.5 mm, jacket LSFH black G50/BW(ZN)H-G35-F 12-fiber, 50/125 µm OM3 BendOtimized, Ø 3.5 mm, jacket LSFH black G50/BW(ZN)H-G35-G 12-fiber, 50/125 µm OM4 BendOtimized, Ø 3.5 mm, jacket LSFH black G62/BW(ZN)H-G35 12-fiber, 62.5/125 µm OM1, Ø 3.5 mm, jacket LSFH black HUBER+SUHNER Wireless infrastructure 151

149 Order information for universal cables Non-armoured multi-fiber loose tube cables u to 24 fibers with LSFH jacket 5.0 mm Item no. Cable tye Descrition G62/W(ZN)H-G50 2-fiber, 62.5/125 µm OM1, Ø 5.0 mm, jacket LSFH black H200/W(ZN)H-G50 2-fiber, HCS 200/230/500 µm, Ø 5.0 mm, jacket LSFH black E9/W(ZN)H-G50 4-fiber, 9/125 µm acc.g.652.d, Ø 5.0 mm, jacket LSFH black G50/W(ZN)H-G50 4-fiber, 50/125 µm OM2, Ø 5.0 mm, jacket LSFH black G62/W(ZN)H-G50 4-fiber, 62.5/125 µm OM1, Ø 5.0 mm, jacket LSFH black G50/W(ZN)H-G50 8-fiber, 50/125 µm OM2, Ø 5.0 mm, jacket LSFH black E9/W(ZN)H-G50 12-fiber, 9/125 µm acc.g.652.d, Ø 5.0 mm, jacket LSFH black G50/W(ZN)H-G50-F 12-fiber, 50/125 µm OM3 BendOtimized, Ø 5.0 mm, jacket LSFH black E9/W(ZN)H-G50 24-fiber, 9/125 µm acc.g.652.d, Ø 5.0 mm, jacket LSFH black G50/W(ZN)H-G50-F 24-fiber, 50/125 µm OM3 BendOtimized, Ø 5.0 mm, jacket LSFH black Glass-armoured multi-fiber loose tube cables u to 24 fibers with LSFH jacket 7.0 mm Item no. Cable tye Descrition E9/W(ZNG)H-G70#D 12-fiber, 9/125 µm acc.g.652.d, Ø 7.0 mm, jacket LSFH black E9/W(ZNG)H-G70-UR 12-fiber, 9/125 µm acc.g.652.d, Ø 7.0 mm, jacket LSFH black UL rating acc.ofn/ofng G50/W(ZNG)H-G70#D 12-fiber, 50/125 µm OM2, Ø 7.0 mm, jacket LSFH black G50/W(ZNG)H-G70-F#D 12-fiber, 50/125 µm OM3 BendOtimized, Ø 7.0 mm, jacket LSFH black G62/W(ZNG)H-G70#D 12-fiber, 62.5/125 µm OM1, Ø 7.0 mm, jacket LSFH black E9/W(ZNG)H-G70#D 24-fiber, 9/125 µm acc.g.652.d, Ø 7.0 mm, jacket LSFH black E9/W(ZNG)H-G70-UR 24-fiber, 9/125 µm acc.g.652.d, Ø 7.0 mm, jacket LSFH black UL rating acc.ofn/ofng G50/W(ZNG)H-G70#D#D 24-fiber, 50/125 µm OM2, Ø 7.0 mm, jacket LSFH black G50/W(ZNG)H-G70-F 24-fiber, 50/125 µm OM3 BendOtimized, Ø 7.0 mm, jacket LSFH black G62/W(ZNG)H-G70#D 24-fiber, 62.5/125 µm OM1, Ø 7.0 mm, jacket LSFH black 152

150 Order information for universal cables Glass-armoured multi-fiber loose tube cables u to 24 fibers with LSFH jacket 8.5 mm Item no. Cable tye Descrition H200/W(ZNG)H-G85#D 2-fiber, HCS 200/230/500 µm, Ø 8.5 mm, jacket LSFH black E9/W(ZNG)H-G85#D 4-fiber, 9/125 µm acc. G.652.D, Ø 8.5 mm, jacket LSFH black G50/W(ZNG)H-G85#D 4-fiber, 50/125 µm OM2, Ø 8.5 mm, jacket LSFH black G50/W(ZNG)H-M85-F#D 4-fiber, 50/125 µm OM3 BendOtimized, Ø 8.5 mm, jacket LSFH turquoise G50/W(ZNG)H-L85-G#D 4-fiber, 50/125 µm OM4 BendOtimized, Ø 8.5 mm, jacket LSFH heather violet G62/W(ZNG)H-G85#D 4-fiber, 62.5/125 µm OM1, Ø 8.5 mm, jacket LSFH black G50/W(ZNG)H-G85#D 6-fiber, 50/125 µm OM2, Ø 8.5 mm, jacket LSFH black G50/W(ZNG)H-G85-UR 6-fiber, 50/125 µm OM2, Ø 8.5 mm, jacket LSFH black UL rating acc. OFN/OFNG G50/W(ZNG)H-M85-F#D 6-fiber, 50/125 µm OM3 BendOtimized, Ø 8.5 mm, jacket LSFH black G50/W(ZNG)H-L85-G#D 6-fiber, 50/125 µm OM4 BendOtimized, Ø 8.5 mm, jacket LSFH heather violet G62/W(ZNG)H-G85#D 6-fiber, 62.5/125 µm OM1, Ø 8.5 mm, jacket LSFH black E9/W(ZNG)H-G85#D 8-fiber, 9/125 µm acc. G.652.D, Ø 8.5 mm, jacket LSFH black G50/W(ZNG)H-G85#D 8-fiber, 50/125 µm OM2, Ø 8.5 mm, jacket LSFH black G62/W(ZNG)H-G85#D 8-fiber, 62.5/125 µm OM1, Ø 8.5 mm, jacket LSFH black E9/W(ZNG)H-G85#D 12-fiber, 9/125 µm acc. G.652.D, Ø 8.5 mm, jacket LSFH black G50/W(ZNG)H-G85#D 12-fiber, 50/125 µm OM2, Ø 8.5 mm, jacket LSFH black G50/W(ZNG)H-G85-F#D 12-fiber, 50/125 µm OM3 BendOtimized, Ø 8.5 mm, jacket LSFH black G50/W(ZNG)H-M85-F#D 12-fiber, 50/125 µm OM3 BendOtimized, Ø 8.5 mm, jacket LSFH turquoise G50/W(ZNG)H-G85-G#D 12-fiber, 50/125 µm OM4 BendOtimized, Ø 8.5 mm, jacket LSFH black G50/W(ZNG)H-L85-G#D 12-fiber, 50/125 µm OM4 BendOtimized, Ø 8.5 mm, jacket LSFH heather violet G62/W(ZNG)H-G85#D 12-fiber, 62.5/125 µm OM1, Ø 8.5 mm, jacket LSFH black E9/W(ZNG)H-G85#D 24-fiber, 9/125 µm acc. G.652.D, Ø 8.5 mm, jacket LSFH black E9/W(ZNG)H-G85-UR 24-fiber, 9/125 µm acc. G.652.D, Ø 8.5 mm, jacket LSFH black UL rating acc.ofn/ofng G50/W(ZNG)H-G85#D 24-fiber, 50/125 µm OM2, Ø 8.5 mm, jacket LSFH black G50/W(ZNG)H-G85-UR 24-fiber, 50/125 µm OM2, Ø 8.5 mm, jacket LSFH black UL rating acc.ofn/ofng G50/W(ZNG)H-G85-F#D 24-fiber, 50/125 µm OM3 BendOtimized, Ø 8.5 mm, jacket LSFH black G50/W(ZNG)H-G85-G#D 24-fiber, 50/125 µm OM4 BendOtimized, Ø 8.5 mm, jacket LSFH black G62/W(ZNG)H-G85#D 24-fiber, 62.5/125 µm OM1, Ø 8.5 mm, jacket LSFH black Glass-armoured multi-fiber loose tube cables u to 24 fibers with LSFH jacket 12 mm Item no. Cable tye Descrition E9/W(ZNG)H-Z fiber, 9/125 µm acc.g.652.d, Ø 12.0 mm, jacket LSFH black with 2 orange stries G50/W(ZNG)H-Z120-F 12-fiber, 50/125 µm OM3 BendOtimized, Ø 12.0 mm, jacket LSFH black with 2 orange stries 153

151 Order information for universal cables TWINTUBE glass-armoured multi-fiber loose tube cables u to 24 fibers with LSFH jacket Item no. Cable tye Descrition E9/W(ZNG)H-G94#D 24-fiber, 9/125 µm acc.g.652.d, Ø 9.4 mm, jacket LSFH black G50/W(ZNG)H-G94#D 24-fiber, 50/125 µm OM2, Ø 9.4 mm, jacket LSFH black G50/W(ZNG)H-M94-F#D 24-fiber, 50/125 µm OM3 BendOtimized, Ø 9.4 mm, jacket LSFH turquoise G50/W(ZNG)H-G94-F#D 24-fiber, 50/125 µm OM3 BendOtimized, Ø 9.4 mm, jacket LSFH black G50/W(ZNG)H-L94-G#D 24-fiber, 50/125 µm OM4 BendOtimized, Ø 9.4 mm, jacket LSFH heather violet G62/W(ZNG)H-G94#D 24-fiber, 62.5/125 µm OM1, Ø 9.4 mm, jacket LSFH black Glass-armoured mini multi-fiber loose tube cables u to 144 fibers with LSFH jacket Item no. Cable tye Descrition E9/BWSN(ZNG)H-G96#D 24-fiber, 9/125 µm acc.g.652.d, Ø 9.6 mm, jacket LSFH black tbd 24-12G50/BWSN(ZNG)H-G96#D 24-fiber, 50/125 µm OM2, Ø 9.6 mm, jacket LSFH black G50/BWSN(ZNG)H-G96-F#D 24-fiber, 50/125 µm OM3 BendOtimized, Ø 9.6 mm, jacket LSFH black tbd 24-12G50/BWSN(ZNG)H-G96-G#D 24-fiber, 50/125 µm OM4 BendOtimized, Ø 9.6 mm, jacket LSFH black E9/BWSN(ZNG)H-G96#D 48-fiber, 9/125 µm acc. G.652.D, Ø 9.6 mm, jacket LSFH black tbd 48-12G50/BWSN(ZNG)H-G96#D 48-fiber, 50/125 µm OM2, Ø 9.6 mm, jacket LSFH black G50/BWSN(ZNG)H-G96-F#D 48-fiber, 50/125 µm OM3 BendOtimized, Ø 9.6 mm, jacket LSFH black G50/BWSN(ZNG)H-G96-G#D 48-fiber, 50/125 µm OM4 BendOtimized, Ø 9.6 mm, jacket LSFH black E9/BWSN(ZNG)H-G fiber, 9/125 µm acc.g.652.d, Ø 10.6 mm, jacket LSFH black tbd 72-12G50/BWSN(ZNG)H-G106-F 72-fiber, 50/125 µm OM3 BendOtimized, Ø 10.6 mm, jacket LSFH black tbd 72-12G50/BWSN(ZNG)H-G106-G 72-fiber, 50/125 µm OM4 BendOtimized, Ø 10.6 mm, jacket LSFH black E9/BWSN(ZNG)H-G fiber, 9/125 µm acc. G.652.D, Ø 12.2 mm, jacket LSFH black E9/BWSN(ZNG)H-G fiber, 9/125 µm acc.g.652.d, Ø 13.6 mm, jacket LSFH black E9/BWSN(ZNG)H-G fiber, 9/125 µm acc.g.652.d, Ø 145 mm, jacket LSFH black tbd G50/BWSN(ZNG)H-G145-F 144-fiber, 50/125 µm OM3 BendOtimized, Ø 14.5 mm, jacket LSFH black tbd G50/BWSN(ZNG)H-G145-G 144-fiber, 50/125 µm OM4 BendOtimized, Ø 14.5 mm, jacket LSFH black TWINTUBE steel-armoured multi-fiber loose tube cables u to 24 fibers with LSFH jacket 12.5 mm Item no. Cable tye Descrition E9/W(ZNG)HAH-G fiber, 9/125 µm acc.g.652.d, Ø 12.5 mm, jacket LSFH black G62/W(ZNG)HAH-G fiber, 62.5/125 µm OM1, Ø 12.5 mm, jacket LSFH black 154

152 Order information for universal cables Steel-armoured multi-fiber loose tube cables u to 24 fibers with LSFH jacket 8 mm Item no. Cable tye Descrition E9/W(ZN)HAH-G80 4-fiber, 9/125 µm acc.g.652.d, Ø 8.0 mm, jacket LSFH black G50/W(ZN)HAH-G80 4-fiber, 50/125 µm OM2, Ø 8.0 mm, jacket LSFH black G62/W(ZN)HAH-G80 4-fiber, 62.5/125 µm OM1, Ø 8.0 mm, jacket LSFH black E9/W(ZN)HAH-G80 6-fiber, 9/125 µm acc.g.652.d, Ø 8.0 mm, jacket LSFH black G62/W(ZN)HAH-G80 6-fiber, 62.5/125 µm OM1, Ø 8.0 mm, jacket LSFH black E9/W(ZN)HAH-G80 12-fiber, 9/125 µm acc.g.652.d, Ø 8.0 mm, jacket LSFH black G50/W(ZN)HAH-G80 12-fiber, 50/125 µm OM2, Ø 8.0 mm, jacket LSFH black G62/W(ZN)HAH-G80 12-fiber, 62.5/125 µm OM1, Ø 8.0 mm, jacket LSFH black Steel-armoured multi-fiber loose tube cables u to 72 fibers with LSFH jacket Item no. Cable tye Descrition E9/BWSN(ZNG)HAH-G fiber, 9/125 µm acc.g.652.d, Ø 13.0 mm, jacket LSFH black E9/BWSN(ZNG)HAH-G fiber, 9/125 µm acc.g.652.d, Ø 14.0 mm, jacket LSFH black RADOX glass-armoured multi-fiber loose tube cables u to 24 fibers with LSFH jacket 8.5 mm Item no. Cable tye Descrition E9A2/W(ZNG)R-G85#C 4-fiber, 9/125 µm acc.g.657-a2, Ø 8.5 mm, jacket RADOX black E9A2/W(ZNG)R-G85#C 12-fiber, 9/125 µm acc.g.657-a2, Ø 8.5 mm, jacket RADOX black tbd 12-12G50/W(ZNG)R-G85#C 12-fiber, 50/125 µm OM2, Ø 8.5 mm, jacket RADOX black G50/W(ZNG)R-C85-F#C 12-fiber, 50/125 µm OM3 BendOtimized, Ø 8.5 mm, jacket RADOX blue tbd 12-12G50/W(ZNG)R-G85-G#C 12-fiber, 50/125 µm OM4 BendOtimized, Ø 8.5 mm, jacket RADOX black E9A2/W(ZNG)R-G85#C 24-fiber, 9/125 µm acc.g.657-a2, Ø 8.5 mm, jacket RADOX black 155

153 Order information for universal cables DNV GL Tye aroved multi-fiber loose tube cable steel-armoured with RADOX jacket Item no. Cable tye Descrition E9/W(ZN)HAR-G82-DNV Steel-armoured multi-fiber loose-tube cable Ø 8.2mm, 12 x 9/125µm G.652.D, loose tube 2.8mm, RADOX black, DNV GL E9/W(ZN)HAR-G82-DNV Steel-armoured multi-fiber loose-tube cable Ø 8.2mm, 24 x 9/125µm G.652.D, loose tube 2.8mm, RADOX black, DNV GL DNV GL Tye aroved multi-fiber loose tube cable glass-armoured with LSFH jacket Item no. Cable tye Descrition E9/W(ZNG)H-G120-DNV Glass-armoured multi-fiber loose-tube cable Ø 12.0mm, 12 x 9/125µm G.652.D, loose tube 2.8mm, LSFH black, DNV GL E9/W(ZNG)H-G120-DNV Glass-armoured multi-fiber loose-tube cable Ø 12.0mm, 24 x 9/125µm G.652.D, loose tube 2.8mm, LSFH black, DNV GL 156

154 Order information for universal cables Steel-armoured aroved multi-fiber loose tube cable with RADOX jacket Item no. Cable tye Descrition E9/W(ZN)HAR-G82 Steel-armoured multi-fiber loose-tube cable Ø 8.2mm, 12 x 9/125µm G.652.D, loose tube 2.8mm, RADOX black G50/W(ZN)HAR-G82 Steel-armoured multi-fiber loose-tube cable Ø 8.2mm, 12 x 50/125µm OM2, loose tube 2.8mm, RADOX black E9/W(ZN)HAR-G82 Steel-armoured multi-fiber loose-tube cable Ø 8.2mm, 24 x 9/125µm G.652.D, loose tube 2.8mm, RADOX black 157

155 Order information for outdoor cables Non-armoured multi-fiber loose tube cable u to 12 fibers with PE jacket 3.5 mm Item no. Cable tye Descrition tbd 04-4E9/BW(ZN)V-G35 4-fiber, 9/125 µm acc.g.652.d, Ø 3.5 mm, jacket HDPE black E9/BW(ZN)V-G35 12-fiber, 9/125 µm acc.g.652.d, Ø 3.5 mm, jacket HDPE black Non-armoured multi-fiber loose tube cables u to 24 fibers with PE jacket 5.0 mm Item no. Cable tye Descrition E9/W(ZN)Y-G50 4-fiber, 9/125 µm acc.g.652.d, Ø 5.0 mm, jacket LDPE black G50/W(ZN)Y-G50 4-fiber, 50/125 µm OM2, Ø 5.0 mm, jacket LDPE black G62/W(ZN)Y-G50 4-fiber, 62.5/125 µm OM1, Ø 5.0 mm, jacket LDPE black E9/W(ZN)Y-G50 8-fiber, 9/125 µm acc.g.652.d, Ø 5.0 mm, jacket LDPE black G50/W(ZN)Y-G50 8-fiber, 50/125 µm OM2, Ø 5.0 mm, jacket LDPE black G62/W(ZN)Y-G50 8-fiber, 62.5/125 µm OM1, Ø 5.0 mm, jacket LDPE black E9/W(ZN)Y-G50 12-fiber, 9/125 µm acc.g.652.d, Ø 5.0 mm, jacket LDPE black G50/W(ZN)Y-G50 12-fiber, 50/125 µm OM2, Ø 5.0 mm, jacket LDPE black G62/W(ZN)Y-G50 12-fiber, 62.5/125 µm OM1, Ø 5.0 mm, jacket LDPE black E9/W(ZN)Y-G50 24-fiber, 9/125 µm acc.g.652.d, Ø 5.0 mm, jacket LDPE black ADSS multi-fiber loose tube cables u to 12 fibers with PE jacket 5.5 mm Item no. Cable tye Descrition E9/BW(ZN)V-G55 12-fiber, 9/125 µm acc.g.652.d, Ø 5.5 mm, jacket HDPE black G50/BW(ZN)V-G55 12-fiber, 50/125 µm OM2, Ø 5.5 mm, jacket HDPE black Glass-armoured multi-fiber loose tube cables u to 24 fibers with PE jacket 7.0 mm Item no. Cable tye Descrition tbd 12-12E9/W(ZNG)Y-G70 12-fiber, 9/125 µm acc.g.652.d, Ø 7.0 mm, jacket LDPE black tbd 24-24E9/W(ZNG)Y-G70 24-fiber, 9/125 µm acc.g.652.d, Ø 7.0 mm, jacket LDPE black 158

156 Order information for outdoor cables Glass-armoured multi-fiber loose tube cables u to 24 fibers with PE jacket 8.5 mm Item no. Cable tye Descrition G50/W(ZNG)Y-G85 2-fiber, 50/125 µm OM2, Ø 8.5 mm, jacket LDPE black G62/W(ZNG)Y-G85 2-fiber, 62.5/125 µm OM1, Ø 8.5 mm, jacket LDPE black H200/W(ZNG)Y-G85 2-fiber, HCS 200/230/500 µm, Ø 8.5 mm, jacket LDPE black E9/W(ZNG)Y-G85 4-fiber, 9/125 µm acc.g.652.d, Ø 8.5 mm, jacket LDPE black G50/W(ZNG)Y-G85 4-fiber, 50/125 µm OM2, Ø 8.5 mm, jacket LDPE black G62/W(ZNG)Y-G85 4-fiber, 62.5/125 µm OM1, Ø 8.5 mm, jacket LDPE black H200/W(ZNG)Y-G85 4-fiber, HCS 200/230/500 µm, Ø 8.5 mm, jacket LDPE black G50/W(ZNG)Y-G85 6-fiber, 50/125 µm OM2, Ø 8.5 mm, jacket LDPE black G62/W(ZNG)Y-G85 6-fiber, 62.5/125 µm OM1, Ø 8.5 mm, jacket LDPE black E9/W(ZNG)Y-G85 8-fiber, 9/125 µm acc.g.652.d, Ø 8.5 mm, jacket LDPE black G50/W(ZNG)Y-G85 8-fiber, 50/125 µm OM2, Ø 8.5 mm, jacket LDPE black G62/W(ZNG)Y-G85 8-fiber, 62.5/125 µm OM1, Ø 8.5 mm, jacket LDPE black E9/W(ZNG)Y-G85 12-fiber, 9/125 µm acc.g.652.d, Ø 8.5 mm, jacket LDPE black G50/W(ZNG)Y-G85 12-fiber, 50/125 µm OM2, Ø 8.5 mm, jacket LDPE black G50/W(ZNG)Y-G85-F 12-fiber, 50/125 µm OM3 BendOtimized, Ø 8.5 mm, jacket LDPE black G62/W(ZNG)Y-G85 12-fiber, 62.5/125 µm OM1, Ø 8.5 mm, jacket LDPE black E9/W(ZNG)Y-G85 24-fiber, 9/125 µm acc.g.652.d, Ø 8.5 mm, jacket LDPE black G50/W(ZNG)Y-G85 24-fiber, 50/125 µm OM2, Ø 8.5 mm, jacket LDPE black G50/W(ZNG)Y-G85-F 24-fiber, 50/125 µm OM3 BendOtimized, Ø 8.5 mm, jacket LDPE black Glass-armoured multi-fiber loose tube cables u to 24 fibers with PE jacket 12 mm Item no. Cable tye Descrition E9/W(ZNG)Y-Z fiber, 9/125 µm acc.g.652.d, Ø 12.0 mm, jacket LDPE black with 2 orange stries G50/W(ZNG)Y-Z fiber, 50/125 µm OM2, Ø 12.0 mm, jacket LDPE black with 2 orange stries G62/W(ZNG)Y-Z fiber, 62.5/125 µm OM1, Ø 12.0 mm, jacket LDPE black with 2 orange stries E9/W(ZNG)Y-Z fiber, 9/125 µm acc.g.652.d, Ø 12.0 mm, jacket LDPE black with 2 orange stries 159

157 Order information for outdoor cables TWINTUBE glass-armoured multi-fiber loose tube cables u to 24 fibers with PE jacket 9.4 mm Item no. Cable tye Descrition E9/W(ZNG)Y-G94 24-fiber, 9/125 µm acc.g.652.d, Ø 9.4 mm, jacket LDPE black G50/W(ZNG)Y-G94 24-fiber, 50/125 µm OM2, Ø 9.4 mm, jacket LDPE black G50/W(ZNG)Y-G94-F 24-fiber, 50/125 µm OM3 BendOtimized, Ø 9.4 mm, jacket LDPE turquoise G50/W(ZNG)Y-G94-G 24-fiber, 50/125 µm OM4 BendOtimized, Ø 9.4 mm, jacket LDPE black G62/W(ZNG)Y-G94 24-fiber, 62.5/125 µm OM1, Ø 9.4 mm, jacket LDPE black Glass-armoured multi-fiber loose tube cables u to 144 fibers with PE jacket Item no. Cable tye Descrition E9/BWSN(ZNG)V-G96 24-fiber, 9/125 µm acc.g.652.d, Ø 9.6 mm, jacket HDPE black E9/BWSN(ZNG)V-G96 48-fiber, 9/125 µm acc.g.652.d, Ø 9.6 mm, jacket HDPE black E9/BWSN(ZNG)V-G fiber, 9/125 µm acc.g.652.d, Ø 10.6 mm, jacket HDPE black E9/BWSN(ZNG)V-G fiber, 9/125 µm acc.g.652.d, Ø 12.2 mm, jacket HDPE black E9/BWSN(ZNG)V-G fiber, 9/125 µm acc.g.652.d, Ø 13.6 mm, jacket HDPE black E9/BWSN(ZNG)V-G fiber, 9/125 µm acc.g.652.d, Ø 14.5 mm, jacket HDPE black 160

158 Order information for outdoor cables Steel-armoured multi-fiber loose tube cables u to 24 fibers with PE jacket 8.0 mm Item no. Cable tye Descrition G50/W(ZN)YAY-G80 4-fiber, 50/125 µm OM2, Ø 8.0 mm, jacket LDPE black G62/W(ZN)YAY-G80 4-fiber, 62.5/125 µm OM1, Ø 8.0 mm, jacket LDPE black G50/W(ZN)YAY-G80 6-fiber, 50/125 µm OM2, Ø 8.0 mm, jacket LDPE black G62/W(ZN)YAY-G80 8-fiber, 62.5/125 µm OM1, Ø 8.0 mm, jacket LDPE black E9/W(ZN)YAY-G80 12-fiber, 9/125 µm acc.g.652.d, Ø 8.0 mm, jacket LDPE black G50/W(ZN)YAY-G80 12-fiber, 50/125 µm OM2, Ø 8.0 mm, jacket LDPE black G62/W(ZN)YAY-G80 12-fiber, 62.5/125 µm OM1, Ø 8.0 mm, jacket LDPE black tbd 24-24E9/W(ZN)YAY-G80 24-fiber, 9/125 µm acc.g.652.d, Ø 8.0 mm, jacket LDPE black TWINTUBE steel-armoured multi-fiber loose tube cables u to 24 fibers with PE jacket 12.5 mm Item no. Cable tye Descrition tbd 24-12E9/W(ZNG)YAY-G fiber, 9/125 µm acc.g.652.d, Ø 12.5 mm, jacket LDPE black G50/W(ZNG)YAY-D fiber, 50/125 µm OM2, Ø 12.5 mm, jacket LDPE orange G62/W(ZNG)YAY-G fiber, 62.5/125 µm OM1, Ø 12.5 mm, jacket LDPE black Steel-armoured multi-fiber loose tube cables u to 72 fibers with PE jacket Item no. Cable tye Descrition E9/BWSN(ZNG)VAV-G fiber, 9/125 µm acc.g.652.d, Ø 13.0 mm, jacket HDPE black E9/BWSN(ZNG)VAV-G fiber, 9/125 µm acc.g.652.d, Ø 14.0 mm, jacket HDPE black 161

159 Order information for secial cables Simlex cables 1.9 mm PUR jacket with tight tube 0.9 mm Item no. Cable tye Descrition E9/FJU-E19 1-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 1.9 mm, jacket PUR yellow E9A2/FJU-E19-FG 1-fiber, 9/125 µm acc.itu-g.657-a2, Ø 1.9 mm, jacket PUR yellow G50/FJU-D19 1-fiber, 50/125 µm OM2, Ø 1.9 mm, jacket PUR orange G50/FJU-D19-F 1-fiber, 50/125 µm OM3 BendOtimized, Ø 1.9 mm, jacket PUR orange G62/FJU-D19 1-fiber, 62.5/125 µm OM1, Ø 1.9 mm, jacket PUR orange Rugged simlex cables 6.0 mm PUR jacket with 2.7 mm/tight tube 0.9 mm Item no. Cable tye Descrition G50/FJH(ZN)Z-D27 1-fiber, 50/125 µm OM2, Ø 6.0 mm, jacket PUR orange G62/FJH(ZN)Z-B27 1-fiber, 62.5/125 µm OM2, Ø 6.0 mm, jacket PUR green H200/FJH(ZN)Z-D27 1-fiber, HCS 200/230/500 µm, Ø 6.0 mm, jacket PUR orange Rugged minicord breakout cables PUR jacket with simlex 1.7 mm/tight tube 0.9 mm Item no. Cable tye Descrition E9/FJ(ZN)Z-G17 2-fiber, 9/125 µm acc.g.652.d/g.657.a1, Ø 6.0 mm, jacket PUR black E9A2/FJ(ZN)Z-G17-FG 2-fiber, 9/125 µm acc.itu-g.657-a2, Ø 6.0 mm, jacket PUR black G50/FJ(ZN)Z-G17 2-fiber, 50/125 µm OM2, Ø 6.0 mm, jacket PUR black G62/FJ(ZN)Z-G17 2-fiber, 62.5/125 µm OM1, Ø 6.0 mm, jacket PUR black H200/FJ(ZN)Z-G17 2-fiber, HCS 200/230/500 µm, Ø 6.0 mm, jacket PUR black TWINFLEX Industrial Link PUR jacket with simlex 2.2 mm/tight tube 0.9 mm Item no. Cable tye Descrition G50/FJ(ZN)Z-G22 2-fiber, 50/125 µm OM2, Ø mm, jacket PUR black G62/FJ(ZN)Z-G22 2-fiber, 62.5/125 µm OM1, Ø mm, jacket PUR black H200/VJ(ZN)Z-G22 2-fiber, HCS 200/230/500 µm, Ø mm, jacket PUR black POF980/M(ZN)Z-G22 2-fiber, POF 980/1000 µm, Ø mm, jacket PUR black 162

160 Order information for secial cables TWINFIX Industrial Link LSFH jacket with simlex 2.2 mm/tight tube 0.9 mm Item no. Cable tye Descrition E9/FJ(ZNG)H-G22#D 2-fiber, 9/125 µm acc.g.652.d/g.657.a1, Ø mm, jacket LSFH black G50/FJ(ZNG)H-G22#D 2-fiber, 50/125 µm OM2, Ø mm, jacket LSFH black G50/FJ(ZNG)H-G22-UN 2-fiber, 50/125 µm OM2, Ø mm, jacket LSFH black UL rating acc.ofn/ofng G62/FJ(ZNG)H-G22#D 2-fiber, 62.5/125 µm OM1, Ø mm, jacket LSFH black G62/FJ(ZNG)H-G22-UN 2-fiber, 62.5/125 µm OM1, Ø mm, jacket LSFH black UL rating acc.ofn/ofng H200/VJ(ZNG)H-G22#D 2-fiber, HCS 200/230/500, Ø mm, jacket LSFH black POF980/M(ZNG)H-G22 2-fiber, POF 980/1000, Ø mm, jacket LSFH black QUADFIX Industrial Link LSFH jacket with simlex 2.2 mm/tight tube 0.9 mm Item no. Cable tye Descrition E9/FJ(ZNG)H-G22#C 4-fiber, 9/125 µm acc.g.652.d/g.657.a1, Ø 9.0 mm, jacket LSFH black G50/FJ(ZNG)H-G22#C 4-fiber, 50/125 µm OM2, Ø 9.0 mm, jacket LSFH black G62/FJ(ZNG)H-G22#C 4-fiber, 62.5/125 µm OM1, Ø 9.0 mm, jacket LSFH black tbd 04-H200/VJ(ZNG)H-G22#C 4-fiber, HCS 200/230/500 µm, Ø 9.0 mm, jacket LSFH black Mobile field cables PUR jacket with tight tube 0.9 mm Item no. Cable tye Descrition E9/FSN(ZN)Z-G56 2-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 5.6 mm, jacket PUR black G50/FSN(ZN)Z-G56 2-fiber, 50/125 µm OM2, Ø 5.6 mm, jacket PUR black tbd 02-G62/FSN(ZN)Z-G56 2-fiber, 62.5/125 µm OM1, Ø 5.6 mm, jacket PUR black E9/FSN(ZN)Z-G56 4-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 5.6 mm, jacket PUR black G50/FSN(ZN)Z-G56 4-fiber, 50/125 µm OM2, Ø 5.6 mm, jacket PUR black G62/FSN(ZN)Z-G56 4-fiber, 62.5/125 µm OM1, Ø 5.6 mm, jacket PUR black E9/FSN(ZN)Z-G68 8-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 6.8 mm, jacket PUR black G50/FSN(ZN)Z-G68 8-fiber, 50/125 µm OM2, Ø 6.8 mm, jacket PUR black G62/FSN(ZN)Z-G68 8-fiber, 62.5/125 µm OM1, Ø 6.8 mm, jacket PUR black E9/FSN(ZN)Z-G80 12-fiber, 9/125 µm acc.g.652.d/g.657-a1, Ø 8 mm, jacket PUR black G50/FSN(ZN)Z-G80 12-fiber, 50/125 µm OM2, Ø 8 mm, jacket PUR black G62/FSN(ZN)Z-G80 12-fiber, 62.5/125 µm OM1, Ø 8 mm, jacket PUR black 163