Fiber Optic Cables. Edition 2018

Transcription

1 Fiber Otic Cables Edition 2018

2 Otimize your data communication

3 Your artner for system solutions HUBER+SUHNER is a leading international roducer and sulier of electrical and otical interconnectivity comonents and systems. Core caabilities in radio frequency, fiber otic and low frequency technology are united under a single roof. HUBER+SUHNER offers a wide range of fibre otical cables, otimized for fix or mobile alications at indoor and outdoor areas. Due to new market demands innovative roducts are develoed and tested according to international standards, which fulfil high mechanical and thermal conditions as well as fire requirements.

4

5 Content Introduction 6 Fiber tyes/terms and definitions 8 Testing rocedure 22 Indoor cables 28 Universal cables 70 Outdoor cables 96 Secial cables 110 Ordering information 144 Secial terms/glossary 170

6 6 HUBER+SUHNER Fiber Otic Cables

7 Alication areas HUBER+SUHNER offers a range of different fiber otic cables, that are used in various alications. 1 On shis and offshore latforms 2 On railway infrastructures 3 In machinery and automation 4 In homes FTTH/FITH 5 In office buildings/lan 6 Cables for antennas (FTTA) 7 In wind turbines and wind farms 8 In technical building, ower lants and ower transmission stations 9 For mining and construction sites 10 In mobile vehicles and equiment 11 In central offices, data center 6 11 HUBER+SUHNER Fiber Otic Cables 7

8 Secification single-mode fiber E9/125/245 µm Otical characteristics single-mode fiber Conditions E9/125 E9/125 A1 1) E9/125 A2 E9/125A3 Standards according ITU-T G.652.D G.657.A1 1) G.657.A2 G.657.A2/B3 Attenuation tyical (in cable) 1310 nm db/km nm db/km nm db/km nm db/km Attenuation maximum (in cable) 1310 nm db/km nm db/km nm db/km nm db/km Cable cut-off wavelength λ cc standard nm Chromatic disersion nm s/nm km nm s/nm km Zero disersion wavelength λ o Zero disersion sloe S 0 at λ o Polarization mode disersion link value s/ km individual s/ km Mode-field diameter 1310 nm µm 9.2 ± ± nm µm 10.3 ± ± Grou index of refraction tyical 1310 nm nm Macrobending loss r = 5.0 mm, 1 turn 1550 nm db nm db 0.45 Macrobending loss r = 7.5 mm, 1 turn 1550 nm db nm db Macrobending loss r = 10 mm, 1 turn 1550 nm db nm db Macrobending loss r = 15 mm, 10 turn 1550 nm db nm db Single-mode fibers used for reterminated indoor cable fulfils standard ITU-T G.652.D and ITU-T G.657.A1. 1) For cables with semi-tight and tight tubes: 1310 nm 0.40 db/km 1550 nm 0.30 db/km 1625 nm 0.50 db/km 8 HUBER+SUHNER Fiber Otic Cables

9 Secification single-mode fiber Geometrical characteristics E9/125 E9/125 A1 E9/125 A2 E9/125 A3 Cladding diameter μm 125 ± 0.7 Coating diameter (uncoloured) μm 242 ± 7 Concentricity error core/cladding μm 0.5 Concentricity error cladding/coating μm 12.0 Cladding non-circularity % 0.7 Coating non-circularity % 5 Mechanical and environmental characteristics Coating-Material E9/125 E9/125 A1 E9/125 A2 E9/125 A3 acrylate Tensile roof test (fiber elongation 1 %) N (Ksi) 8.8 (100) Oeration temerature range 60 to 85 C 1310, 1550 and 1625 nm db/km 0.05 Water immersion 23 C for 30 days 1310, 1550 and 1625 nm db/km 0.05 Secifications Fiber class E9/125 E9/125 A1 E9/125 A2 E9/125 B3 Standards ITU-T G.652.D IEC Tye B1.3 DIN VDE 0888 Part 3 ITU-T G.657.A1 IEC Tye B6_a1 ITU-T G.657.A2 IEC Tye B6_a2 ITU-T G.657 B3 IEC Tye B6_b3 HUBER+SUHNER Fiber Otic Cables 9

10 Secification multimode fiber G50/125/245 µm Otical characteristics multimode fiber Fiber class G50/125 OM2 OM3 OM4 OM5* ) Fiber class available by H+S standard F G H Bandwidth (overfilled launch) min. 850 nm MHz km nm MHz km Gigabit Ethernet 1000BASE SX 850 nm m LX 1300 nm m Gigabit Ethernet 10GBASE SX 850 nm m LX nm m Bending loss at 850/1300 nm r = 37.5 mm db 0.1/0.2 1) r = 15.0 mm db 0.1/0.3 1) r = 7.5 mm db 0.2/0.5 1) Attenuation tyical (in cable) 850 nm db/km nm db/km 0.5 Attenuation maximum (in cable) 850 nm db/km nm db/km 1.0 Effective grou index of refraction 850 nm nm Numerical aerture ± *) With secified fiber arameters for wave length multilexing between 850 nm and 950 nm. 1) OM3 and OM4 BendOtimised is a HUBER+SUHNER standard 10 HUBER+SUHNER Fiber Otic Cables

11 Secification multimode fiber Geometrical characteristics Fiber class G50/125 OM2 OM3 OM4 OM5 Core diameter μm 50 ± 2.5 Cladding diameter μm 125 ± 1 Coating diameter (uncoloured) μm 242 ± 10 Concentricity error core/cladding μm 1.0 Core non-circularity μm 5 Cladding non-circularity % 1 Coating non-circularity % 5 Mechanical and environmental characteristics Fiber class G50/125 OM2 OM3 OM4 OM5 Coating material acrylate Tensile roof test at fiber elongation 1 % N (Ksi) 8.8 (100) Temerature range max. 0.1 db/km 850/1300 nm C 60 to +85 Water immersion max. 0.2 db/km 850/1300 nm 23 C more than 30 days Secifications Fiber class G50/125 OM2 OM3 OM4 OM5 Standards 1) ITU-T G.651 IEC A1a.1b A1a.2b A1a.3b A1a.4 1) The suffix "a" (A1a...a) secifies fibers with traditional macrobend loss erformance levels; the suffix "b" (A1a...b) secifies fibers with enhanced macrobend loss erformance levels. HUBER+SUHNER Fiber Otic Cables 11

12 Secification multimode fiber G62.5/125/245 µm Otical characteristics multimode fiber Fiber class G62.5/125 OM1 OM2 Fiber class available by H+S standard D Bandwidth (overfilled launch) min. 850 nm MHz km nm MHz km Gigabit Ethernet 1000BASE SX 850 nm m LX 1300 nm m Attenuation tyical (in cable) 850 nm db/km nm db/km 0.5 Attenuation maximum (in cable) 850 nm db/km nm db/km 1.0 Effective grou index of refraction 850 nm nm Numerical aerture ± HUBER+SUHNER Fiber Otic Cables

13 Secification multimode fiber Geometrical characteristics Fiber class G62.5/125 OM1 Core diameter μm 62.5 ± 3 Cladding diameter μm 125 ± 2 Coating diameter (uncoloured) μm 245 ± 10 Concentricity error core/cladding μm 1.5 Core non-circularity μm 6 Cladding non-circularity % 1 Coating non-circularity % 6 OM2 Mechanical and environmental characteristics Fiber class G62.5/125 OM1 Coating material acrylate Tensile roof test at fiber elongation 1 % N (Ksi) 8.8 (100) Temerature range max. 0.1 db/km 850/1300 nm C 60 u to +85 Water immersion max. 0.2 db/km 850/1300 nm 23 C more than 30 days OM2 Secifications Fiber class Standards G62.5/125 OM1 IEC A1b OM2 HUBER+SUHNER Fiber Otic Cables 13

14 Secification multimode fiber H200/230/500 µm Otical characteristics multimode ste index fiber (HCS) Fiber class H200/230/500 Bandwidth (overfilled launch) 850 nm MHz km 20 Attenuation tyical (in cable) 850 nm db/km 5 Attenuation maximum (in cable) 850 nm db/km 10 Numerical aerture 0.37 ± 0.02 Geometrical characteristics Fiber class H200/230/500 Core diameter μm 200 ± 4 Cladding diameter μm Coating diameter (uncoloured) μm 500 ± 30 Concentricity error core/cladding μm 5 Mechanical and environmental characteristics Fiber class H200/230/500 Coating-Material Tefzel Tensile roof test at a fiber elongation of 1 % N (Ksi) 13.2 (150) Oeration temerature range max. 0.1 db/km 850/1300 nm C 65 to +125 Secifications Fiber class Standards H200/230/500 IEC A3c 14 HUBER+SUHNER Fiber Otic Cables

15 Terms and definitions CH-tube (semi-tight tube) without jelly 0.9 mm Standard tube for igtails tube Ø 0.9 mm coloured fiber 250 µm dry CW-tube (semi-tight tube) jelly-filled 0.9 mm Standard tube for simlex, dulex and breakout cables tube Ø 0.9 mm fiber 245 µm jelly filling Features Easiest striing u to 2 m No cleaning (jelly free) No memory effect High kink resistance Features Easiest striing u to 1 m Good thermal and mechanical features High flexibility Small bending radius F-tube (tight tube) 0.9 mm For various cable designs, e.g. riser, drag chain tube Ø 0.9 mm fiber 245 µm buffer layer Ø 400 µm Features Mechanically rugged Easy striing arox. 30 mm Wide temerature range V-tube (tight buffered tube) 0.6 mm coloured fiber 250 µm acrylate layer Ø 600 µm Features Easy striing arox. 30 mm Wide temerature range BQ-Mini-multi-fiber loose tube, dry/jellyfree cable BW-Mini-multi-fiber loose tube, jelly-filled tube Ø 2.2 mm dry 2 to 12 coloured fibers tube Ø 2.2 mm jelly 2 to 12 coloured fibers Q-Multi-fiber loose tube, dry/jellyfree cable W-Multi-fiber loose tube, jelly-filled tube Ø 2.8 mm dry 2 to 24 coloured fibers tube Ø 2.8 mm jelly 2 to 24 coloured fibers HUBER+SUHNER Fiber Otic Cables 15

16 Cable jacket materials Designation Polyolefine flame retardant Polyethylene Polyurethane flame retardant Polyurethane Polyvinylchloride Polybutylenterehtalate Abbreviation LSFH PVC LDPE HDPE PUR/TPU PUR/TPU PBT TPE HUBER+ SUHNER code H T Y V U Z N X Thermolastic elastomer Combustion roerties Halogen free yes no yes yes yes yes yes Flame retardant yes yes no yes no no no Smoke emission low strong low strong strong strong medium Corrosive gases low high no low low no no Mechanical roerties Abrasion resistance low medium med. good good good good good Flexibility high high med. low high high low medium Hardness medium soft med. hard soft soft hard hard Resistance against Oil/fuel 1) good/ satisfactory good good good satisfactory 2) satisfactory Water good/ satisfactory 2) Weathering 3) good good very good good very good satisfactory good Information given in this table is based on lastic materials used for cable jackets. Proerties and resistance for cables cannot be derived from it. 1) This information is meant as decision guidance to the best of our today's knowledge, it is based on tyical values. The resistance of cables has to be verified due to the wide variety of oils and fuels. 2) Deending on the cable design different tyes of LSFH materials are used for the cable jacket. 3) The UV resistance deends highly on the colour of the lastic used, black offers the best resistance. 16 HUBER+SUHNER Fiber Otic Cables

17 Colour codes Colour code for fiber according to standard Nummer Swisscom 1) DIN 2) ANSI/TIA-598 IEC 3) 1 red red blue blue 2 green green orange yellow 3 yellow blue green red 4 blue yellow brown white 5 white white gray green 6 violet gray white violet 7 orange brown red orange 8 black violet black gray 9 gray turquoise yellow turquoise 10 brown black violet black 11 heather violet orange heather violet brown 12 turquoise heather violet turquoise heather violet Multi fiber loose tube u to 24 fibers, fiber number 13 to 24 with black ring. Note: Orders of fiber otic cables with different fiber tyes (combination SM/MM): unless otherwise secified, the first colours of the colour code are assigned to the fiber tye with the smaller fiber core. Examle of a cable with 4xE9, 8xG50: red, green, yellow, blue = E9 fiber, remaining colours = G50 fiber Stranding according to Swisscom 4) Inscrition standard according to HUBER+SUHNER Multi-fiber loose tube elements xxxxxxxx zzzzzz/yy HUBER+SUHNER FIBEROPTIC. x m 1 red xxxxxxxx item number (8 digits) 2 green zzzzzz roduction number (7 digits) 3 white 1 yy roduction year 4 white amount of fibers fiber tye 5 white m consecutive numbering etc. dummies black Semi-tight tubes 0.9 mm according to HUBER+SUHNER 4) Single fiber cables according to HUBER+SUHNER 4) E9/125 yellow E9/125 yellow G50/125 orange G50/125 orange G62/125 blue G62/125 orange G50/125 OM3 turquoise G50/125 OM3 turquoise G50/125 OM4 heather violet G50/125 OM4 heather violet G50/125 OM5 lime green G50/125 OM5 lime green 1) H+S standard, unless otherwise secified 2) DIN VDE V ) IEC ) Standard, unless otherwise secified HUBER+SUHNER Fiber Otic Cables 17

18 HUBER+SUHNER cable code XXX total number of otical fibers in cable, always indicated with two or three digits to 24 otical fibers er multi-fiber loose tube E9/ single-mode fiber 9/125/245 µm E9A2/ single-mode fiber low bend 9/125/245 µm A2 E9A3/ single-mode fiber low bend 9/125/245 µm A3 E9S/ single-mode fiber 9/125/200 µm G50/ multimode fiber 50/125/250 µm G62/ multimode fiber 62.5/125/250 µm H200/ ste-index fiber HCS 200/230/500 µm F tight tube 0.9 mm V tight tube u to 0.6 mm CW semi-tight tube 0.9 mm, jelly-filled CH semi-tight tube 0.9 mm, dry W multi-fiber loose tube, jelly-filled Ø 2.80 mm Q multi-fiber loose tube, jelly free dry block Ø 2.80 mm BW mini multi-fiber loose tube, jelly-filled Ø 2.20 mm BQ mini multi-fiber loose tube, jelly free dry block Ø 2.20 mm MW micro multi-fiber loose tube, jelly-filled MH micro multi-fiber loose tube, jelly-free J strain relief for each searate otical fiber SN central strength member, non-metallic DN de-centralized strength member, non-metallic (ZN) strain-relief, non-metallic (aramide) (ZNG) glass roving for strain relief/rodent rotection A steel wire armouring H outer jacket material LSFH R outer jacket material RADOX (beam crosslinked) I mica tae (flame barrier) K anti-termite N outer jacket material PA/PBT T outer jacket material PVC U outer jacket material PUR, flame retardant (FR) V outer jacket material PE (HD-PE) X outer jacket material TPE Y outer jacket material PE (LD-PE) Z outer jacket material PUR L anti rodent A outer jacket figure 0 colour of outer jacket lease refer to cable colour chart XX diameter of the cable (1/10 mm) xx otions 1 to 5, see next age G50/ E9/ CW BQ J SN (ZNG) H H M G F examle I examle II 18 HUBER+SUHNER Fiber Otic Cables

19 HUBER+SUHNER cable code Rules For cables where each 0.6 or 0.9 mm tube is individually strain relieved (code = J), the termination diameter is secified. For cables where all tubes have a common strain relief (code = ZN or ZNG) the cable diameter is secified. By individual and common strain relief in the same cable, the termination diameter gets secified. The fiber colour is only indicated if not standard All otions follow the basic code : basic key 1st 2nd 3rd 4th 5th otion The cable code has no saces Items not used are left out Fiber and cable colours A red B green C blue D orange E yellow F white G black H grey I brown K violet L heather violet M turquoise N light blue O ochre-brown P urle Q yellow-green R olive-green S lime green T transarent U nature (milky or beige) Z black with orange stries 1st otion: fiber class or bandwidth length-roduct MHz km, 850/1300 nm G50 G62 Standard OM2 OM1 without indication -D OM2: 500/500 -E OM2: 600/1200 -F OM3: 1500/500 -G OM4: 3500/500 -H OM5: 3500/500 classes lease see under section "Fiber tyes" 2nd otion: fiber colour -F fiber colours refer to fiber colour chard (1 to 12) -F G fiber colours with ring mating (13 to 24) 3rd otion: secial information -UN UL listed OFNG: General urose UL1685 -UR UL listed OFNR: Riser cable UL1666 -UP UL listed OFNP: Plenum cable UL910 4th otion: electrical elements (hybrid cable) +XX- number of conductors resectively units C electrical conductor, coer cords XX conductor cross section (1/10 mm 2 ) +02- C 15 examle 5th otion: CPR classification #B Mainclass B2ca #C Mainclass Cca #D Mainclass Dca #E Mainclass Eca #F Mainclass Fca HUBER+SUHNER Fiber Otic Cables 19

20 DIN/VDE 0888 cable code Alication A outdoor cable AT divideable outdoor cable B loose tube jellyfree D loose tube with jelly F fiber H loose tube jelly-free and 1 fiber J indoor cable U universal cable V tight tube W loose tube with jelly and 1 fiber Tube tye B loose tube jellyfree D loose tube with jelly H loose tube jelly-free and 1 fiber V tight tube W loose tube with jelly and 1 fiber Cable design B glass roving strain relief / anti rodent Q dry and longitudinal watertight (ZN) strain-relief non-metallic (ZS) strain-relief with steel I mica tae/flame barrier (SR) overlaing steel grooved belt Jacket material H acc. LSFH (FRNC, LSOH etc.) Y PVC, olyvinylchloride 2Y PE, olyethylen 4Y PA, olyamide 11Y PUR, olyurethane, rubber-like e.g. for drag chain Quantity of fiber res. tube n amount of fiber n x m amount of loose tube amount of fiber er tube Fiber tye E single-mode fiber (glass/glass) G multimode graded index fiber (glass/glass) S multimode ste index fiber (glass/glass) K PCF, multimode ste index fiber (glass/lastic) GK PCF, multimode graded index fiber (glass/lastic) P POF, lastic fiber (lastic/lastic) Core diameter µm diameter (e.g. 9, 50, 62.5, 200, ) Cladding diameter µm diameter (e.g. 125, 230,.) Attenuation db/km attenuation at wave length Wave length A 650 nm B 850 nm F 1300 nm H 1550 nm Bandwidth MHz km bandwidth with MM fibers (POF MHz 100 m) ns/km at SM fibers also s/nm km 20 HUBER+SUHNER Fiber Otic Cables

21 Conformity and certificate RoHS conformity The HUBER+SUHNER comanies aim to comly with all relevant legal requirements at all time. This also holds true for the Euroean Union Directive 2011/65/EU restriction of the use of certain hazardous substances in electrical and electronic equiment commonly referred to as the Restriction of Hazardous Substances Directive or RoHS. We are roud to state that we are able to suly comonents fully comliant with the RoHS directive. This directive restricts the use of six hazardous materials: Lead (Pb), Mercury (Hg), Cadmium (Cd), hexavalent Chromium (Cr VI), and two tyes of brominated flame retardants, Polybrominated Bihenyls (PBB) and Polybrominated Dihenyl Ethers (PBDE) in the manufacture of various tyes of electronic and electrical equiment to reduce generation of toxic waste from discarded electrical and electronic equiment. ISO Certificate High-quality roducts and sulier relationshis have always been a to riority for HUBER+SUHNER. After having already been confirmed by the Swiss forerunner movement, the HUBER+SUHNER quality system was very soon acknowledged by the international ISO quality certificate. This much sought-after certificate according to ISO 9001, which must be earned over and over again, has been awarded to HUBER+SUHNER without interrution since The fact that HUBER+SUHNER is also reared to meet secific customer quality standards exceeding those of ISO 9001 is amly roved by a large number of successfully assed customer audits. HUBER+SUHNER Fiber Otic Cables 21

22 Test rocedures Tensile erformance Examines the behaviour of the attenuation and/or the fiber elongation strain as a function of the load on a cable design which may occur during installation (short term load or maximum secified load for the cable) and oeration (long term load). This method is intended to be non-destructive. Standards: IEC E1 (former IEC E1) Crush resistance Examines the ability of an otical fiber cable to withstand crushing (transverse comression load) for long term (oeration) and for short term (installation) loads. The load is uniformly alied on the cable samle. Standards: IEC E3 (former IEC E3) Imact Examines the ability of an otical fiber cable to withstand reeated imacts such as droing of tools or stones. Standards: IEC E4 (former IEC E4) Reeated bending Examines the ability of an otical fiber cable to withstand reeated bending. The stress occurs by reeated bending the cable back and forth by 90º. Standards: IEC E6 (former IEC E6) 22 HUBER+SUHNER Fiber Otic Cables

23 Test rocedures Torsion Examines the ability of a fibre otic cable to withstand mechanical twisting. The rimary urose of this rocedure is to measure any variation in the otical ower transmittance of a fiber when the cable is subjected to external torsional forces. A secondary urose is to evaluate the ossibility of hysical damage that may occur as a result of such stresses. Standards: IEC E7 (former IEC E7) Cable bend Examines the ability of an otical fiber cable or cable element to withstand bending around a test mandrel. Standards: IEC E11 (former IEC E11) Kink Examines the minimum loo diameter at the onset of the kinking of an otical fiber cable. Standards: IEC E10 (former IEC E10) Coiling caability Shows the ability of a fiber otic cable to withstand winding and unwinding The urose is to measure variation of the otical ower transmittance of a fiber and to evaluate ossible hysical damage when the cable is wound and unwound on a reel. Standards: HUBER+SUHNER HUBER+SUHNER Fiber Otic Cables 23

24 Test rocedures Flexing Examines the ability of a fiber otic cable to withstand reeated flexing in service. The rimary urose of this rocedure is to measure any variation in the otical ower transmittance of a fiber when the cable is subjected to external bending and tensional forces. A secondary urose is to evaluate the ossibility of hysical damage that may occur as a result of such stresses. This is a secialized test intended for secific tyes of cable, such as elevator cable or the like. Standards: IEC E8 (former IEC E8) Temerature cycling (change) Long length cables Examines the stability behaviour of the attenuation of cables submitted to temerature changes. Test conditions for temerature-deendent measurements simulate the worst conditions. Standards : IEC F1 (former IEC F1) Short length cables (i.e. cables for atchcords) Examines the attenuation behaviour (change in attenuation) when otical fibre cables for use in atch cords are subjected to temerature cycling. Standard: IEC F12 (former IEC , annex E) (IEC ) Water enetration Examines the ability of a cable to block water migration along a secified length. Standards: IEC F5A/B/C (former IEC F5A/B) method A method B Ageing Examines the life-time behaviour of the attenuation of cables, or hysical attributes secified in the detail secification. Standards: IEC F9 (former IEC F9) 24 HUBER+SUHNER Fiber Otic Cables

25 Test rocedures Fire roagation on a vertical single cable Cables for information transmission inside buildings installed on the surface of walls are a otential source for fire roagation. A 60 cm long cable is mounted vertically. The flame must extinguish itself and the fire damage must not reach the uer end of samle Standards: IEC (DIN VDE B) (VDE ) Fire roagation on a vertical cable bundle Deending on the volume of flammable material the cable bundles are fixed on a 3.5 m long ladder and a test flame is alied at the base during 20 minutes. The height of fire damage must not exceed 2.5 m. This simulates a simlified chimney effect in a cable duct. Cables which ass this test have a imroved characteristics regarding fire roagation. Standards: IEC (DIN VDE C) (VDE ) Part (category) Volume of combustible material [l/m] 22 (A) (B) (C) (D) Flame alication time [min] Smoke emission In a defined test environment the cable is exosed to an oen fire of burning alcohol. The smoke density is determined with an otical transmission measurement. This test allows a statement of the exected line-of-sight obstruction in case of fire. Standards: IEC (DIN VDE ) (VDE ) Fire test with circuit integrity A test fire is alied horizontally from a distance of 60 cm to a single susended cable during a secified time. The test is assed when there was continuous circuit integrity and no extremely increased attenuation values during and after the test resectively. For instance FE 90 cables have endured at least 90 minutes, «FE» stands for flame exosure. This fire test shows the functional integrity duration (minutes) of a mechanically unloaded connection with a flame exosure of minimum 750 C in a dry environment. Standards: IEC DIN VDE HUBER+SUHNER Fiber Otic Cables 25

26 Test rocedures Measurement of the heat release and smoke roduction during the flame sread test The cable bundles will be secured to a 3.5 m ladder to suit the quantity of inflammable material. A test flame acts on the lower end of the cable samles for 20 minutes. The following arameters are measured: Smoke roduction Flaming drolets Heat release rate Total heat release Fire growth rate Flame sread The main class and arts of the additional classes are deendent on the measured arameters. Standard: EN Fire with shock, circuit integrity In addition to the fire test with circuit integrity, a test flame is alied to a secified test layout and the cable is exosed to mechanical imacts at regular intervals. This test simulates how many minutes a cable exosed to fire of at least 830 C and mechanical imacts kees minimum insulation efficiency (circuit integrity) in a dry environment. Standards: IEC (former IEC ) Corrosive fire gases and free of halogen Flammable materials are combusted at over 900 C. Resulting fire gases are washed out in water bottles and the corrosivness of this solution is determined by means of h-values and electric conductivity. Halogen free roducts contain hardly any elements of fluorine, chlorine, bromine or jodine. Materials containing halogen can release a considerable quantity of corrosive gases. These gases can cause consequential damage to the surrounding area as well as resiratory roblems. Standards: IEC / (DIN VDE ) (VDE ) DIN VDE HUBER+SUHNER Fiber Otic Cables

27 Construction Products Regulation (CPR) The Construction Products Regulation 1) defines uniform classification for all cables ermanently installed within anytye of building or structure and regulates the conditions for the lacing or making available on the Euroean market. Class Classification / Test methods Additional classifications / Test methods Aca Heat of combustion (EN ISO 1716) B1ca Heat release, s1a B2ca flame sread s1b (EN 50399, s1 Cca Dca EN ) s2 s3 Eca Flame sread (EN ) Fca does not meet Eca Smoke roduction (EN 50399, EN ) d0 d1 d2 Flaming drolets (EN 50399) a1 a2 a3 Acidity (EN ) 1) Regulation (EN) No. 305/2011 of the Euroean Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction roducts and reealing Council Directive 89/106/EEC HUBER+SUHNER Fiber Otic Cables 27

28 Indoor cables Cable tye Page Ordering key Weight kg/km Number of fibers Semi-tight tubes 0.9 mm /CH Tight tubes 0.9 mm /F Tight tubes 0.6 mm /V-T Simlex /VJH /CWJH /CWJH /CWJH /CWJH Simlex according DTAG secification /CHJH /CHJH Dulex figure 8 (Zi cord) /VJH /FJH /CWJH /CWJH /CWJH Dulex figure /VJH-A /CWJH-A /CWJH-A Dulex round /V(ZN)H Otiack /(ZN)H /(ZN)H /(ZN)H /(ZN)H- 36 Breakout 1.4 mm /VJSNH /VJSNH /VJSNH or 12 8 or Breakout 2.0 mm /CWJSNH /CWJSNH /CWJSNH /CWJSNH = assed 28 HUBER+SUHNER Fiber Otic Cables

29 Tube Ø mm Ø Single fiber cable mm Jacket Ø mm Jacket material Direct connector assembly Tensile strength N Crush resis-tance N/dm Temerature range in service C Fire roagation IEC Fire roagation IEC CPR 2011/305/EU LSFH to TPE to acrylate to LSFH LSFH LSFH LSFH LSFH to to to to to +70 Dca-s1a, d0, a1 Dca-s1a, d0, a1 Dca-s1a, d0, a1 Dca-s1a, d0, a LSFH LSFH * * to to +70 Dca-s1a, d0, a x x x x x 5.5 LSFH LSFH LSFH LSFH LSFH to to to to to +70 Dca-s1a, d0, a1 Dca-s1a, d0, a1 Dca-s1a, d0, a x LSFH LSFH LSFH to to to +70 Dca-s1a, d0, a1 Dca-s1a, d0, a LSFH to +70 Dca-s1a, d0, a " LSFH LSFH LSFH LSFH to to to to +70 Dca-s1a, d0, a1 Dca-s1a, d0, a1 Dca-s1a, d0, a1 Dca-s1a, d0, a LSFH LSFH LSFH to to to +70 Dca-s2, d2, a1 Dca-s1a, d2, a1 Cca-s1a, d1, a LSFH LSFH LSFH LSFH to to to to +70 Dca-s1a, d0, a1 Cca-s1a, d2, a1 Cca-s1a, d2, a1 Cca-s1a, d1, a1 HUBER+SUHNER Fiber Otic Cables 29

30 Indoor cables (continuance) Cable tye Page Ordering key Weight kg/km Number of fibers Fire resistant breakout 2.0 mm /CWJSNHIH /CWJSNHIH /CWJSNHIH Otiack breakout /48- /(ZN)SNH /(ZN)SNH /(ZN)SNH /(ZN)SNH- 20 Otiack breakout /96- /(ZN)SNH /(ZN)SNH /(ZN)SNH / / Riser /FSN(ZN)H /FSN(ZN)H /FSN(ZN)H FTTH simlex E9A2/CWJH FG 7 1 FTTH Microtube E9A2/MH(ZN)H FTTH indoor E9A2/V(ZN)H FTTH indoor HOMESTAR E9A./F(ZN)H E9A./FSN(ZN)H E9A./FSN(ZN)H = assed 30 HUBER+SUHNER Fiber Otic Cables

31 Tube Ø mm Ø Single fiber cable mm Jacket Ø mm Jacket material Direct connector assembly Tensile strength N Crush resistance N/dm Temerature range in service C Fire roagation IEC Fire roagation IEC CPR 2011/305/EU LSFH LSFH LSFH to to to LSFH LSFH LSFH LSFH to to to to +60 */** */** LSFH LSFH LSFH to to to +60 */** */** LSFH LSFH LSFH to to to +70 Dca-s2, d0, a LSFH to +70 Dca-s1a, d0, a1 2.3 LSFH to +70 Dca-s1a, d0, a LSFH to +70 Dca-s1a, d0, a LSFH LSFH LSFH to to to +70 * B2ca-s1a, d0, a1 ** Cca-s1a, d0, a1 HUBER+SUHNER Fiber Otic Cables 31

32 Semi-tight tubes 0.9 mm Proerties Metal free indoor cable For direct connector assembly Tube can be stried u to 2 m in one iece Tight bending radii High flexibility Halogen free and non-corrosive fire gases Jacket material according to UL 94V-0 Jelly free, dry Alications Pigtail assemblies for fusion or mechanical slicing within distribution frames and termination boxes Mini atch cables within rotected enclosures For termination with assive otical comonents such as connectors Design Tube coloured fiber in dry tube (jelly free) Tube material halogen free (LSFH) Tube colour E9 yellow G50 - OM2 orange G50 - OM3 turquoise G50 - OM4 heather violet G50 OM5 lime green G OM1 blue other colours on request According to IEC Ordering information /CH-...9 Please see age HUBER+SUHNER Fiber Otic Cables

33 Semi-tight tubes 0.9 mm Secification Semi-tight tube dry Tube Ø mm 0.9 Arox. weight kg/km 0.8 Mechanical roerties Tensile strength during installation N 20 IEC E1 in service N 10 Min. bend radius 1) during installation mm 25 IEC E11 in service mm 25 Crush resistance short-term N/dm 1000 IEC E3 long-term N/dm 500 Imact resistance W = 0.74 J imacts 3 IEC E4 Kink resistance r = 5 mm assed IEC E10 Torsion ± 360, length = 1000 mm, F = 5N cycles 3 IEC E7 Thermal roerties Temerature range during installation C 10 to +50 IEC F12 in service C 25 to +75 in storage C 40 to +75 Combustion roerties Fire load MJ/m /65/EC (RoHS) comliant 1) Smaller bending radius are ossible with E9/125 LowBend (ITU G.657) and G50/125-OM3/OM4 BendOtimized. HUBER+SUHNER Fiber Otic Cables 33

34 Tight tubes 0.9 mm Proerties Metal free indoor cable For direct connector assembly Tube can be stried u to 30 mm in one iece Tight bending radii For high mechanical and thermal stability Halogen free and non-corrosive fire gases Imroved crush resistance Alications Patch cable within distribution frames and termination boxes In thermally and mechanically critical environments For mobile or flexible systems Design Tube buffer layer on fiber Tube material halogen free (TPE) Tube colour E9 yellow G50 OM2 orange G50 OM3 turquoise G50 OM4 heather violet G50 OM5 lime green G62.5 OM1 blue other colours on request According to IEC Ordering information /F-...9 Please see age HUBER+SUHNER Fiber Otic Cables

35 Tight tubes 0.9 mm Secification Tight tube Tube Ø mm 0.9 Arox. weight kg/km 0.8 Mechanical roerties Tensile strength during installation (r 25 mm) N 20 IEC E1 in service (r 25 mm) N 10 Min. bend radius 1) during installation mm 25 IEC E11 in service mm 25 Crush resistance short-term N/dm 1000 IEC E3 long-term N/dm 500 Imact resistance W = 0.74 J, r = 25 mm imacts 100 IEC E4 Torsion ± 7200, length = 1000 mm, F = 5 N cycles 3 IEC E7 Thermal roerties Temerature range during installation C 10 to +60 IEC F12 in service C 40 to +85 in storage C 40 to +60 Combustion roerties Fire load MJ/m /65/EC (RoHS) comliant 1) Smaller bending radius are ossible with E9/125 LowBend (ITU G.657) and G50/125-OM3/OM4 BendOtimized. HUBER+SUHNER Fiber Otic Cables 35

36 Tight tubes 0.6 mm Proerties Metal free indoor cable For direct connector assembly Tube can be stried u to 30 mm in one iece Tight bending radii For high thermal stability Halogen free and non-corrosive fire gases Alications Data cable in distribution network FTTH Installation in indoor area Design Tube coloured fiber with a transarent buffer layer Tube material acrylat Tube colour E9 yellow G50 OM2 orange G50 OM3 turquoise G50 OM4 heather violet G50 OM5 lime green G62.5 OM1 blue other colours on request According to IEC Ordering information /V-T6-... Please see age HUBER+SUHNER Fiber Otic Cables

37 Tight tubes 0.6 mm Secification Tight tube Tube Ø mm 0.6 Arox. weight kg/km 0.3 Mechanical roerties Tensile strength during installation N 20 IEC E1 in service N 10 Min. bend radius 1) during installation mm 25 IEC E11 in service mm 25 Crush resistance short-term N/dm 500 IEC E3 long-term N/dm 250 Thermal roerties Temerature range during installation C 10 to +60 IEC F12 in service C 40 to +85 in storage C 40 to +60 Combustion roerties Fire load MJ/m /65/EC (RoHS) comliant 1) Smaller bending radius are ossible with E9/125 LowBend (ITU G.657) and G50/125-OM3/OM4 BendOtimized. HUBER+SUHNER Fiber Otic Cables 37

38 Simlex cables Proerties Metal free indoor cable Each fiber strain relieved For direct connector assembly with strain relief Tight bending radii High flexibility Halogen free and non-corrosive fire gases Jacket material according to UL 94V-0 Low fire load for high safety requirements Alications Patch cables for data centers Installation in indoor area Measurement cable withstanding mechanical loading Data cable in distribution centres Strain-relieved igtail Ideal for alications involving safety requirements in case of fire Design Tube tight buffered tube 0.6 mm, stried u to 30 mm semi-tight tubes 0.9 mm, stried u to 1 m Strain relief aramide yarn Jacket materiallsfh Tube colour E9 yellow G50 OM2 orange G50 OM3 turquoise G50 OM4 heather violet G50 OM5 lime green G62.5 OM1 orange According to IEC Ordering information /VJH /CWJH /CWJH /CWJH /CWJH Please see age 144, HUBER+SUHNER Fiber Otic Cables

39 Simlex cables Secification Jacket Ø mm Tube Ø mm Arox weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius 1) during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Imact resistance W = 0.5 J imacts 3 3 IEC E4 W = 0.74 J W = 1.0 J 20 Reeated bending r = 25 mm cycles IEC E6 Thermal roerties Temerature range during installation C 10 to to to to to +50 IEC F12 in service C 25 to to to to to +70 in storage C 40 to to to to to +70 Combustion roerties Fire load MJ/m Fire roagation on vertical single cable on vertical cable bundle IEC IEC Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant (EU) No 305/2011 (CPR) Dca-s1a, d0, a1 EN = assed 1) Smaller bending radius are ossible with E9/125 LowBend (ITU G.657) and G50/125-OM3/OM4 bend otimised. HUBER+SUHNER Fiber Otic Cables 39

40 Simlex cables according DTAG* secification Proerties Metal free indoor cable Each fiber strain relieved For direct connector assembly with strain relief Tight bending radii High flexibility Halogen free and non-corrosive fire gases Jacket material according to UL 94V-0 Low fire load for high safety requirements Cable constructions according to DTAG* secification Alications Patch cables for data centers Installation in indoor area Measurement cable withstanding mechanical loading Data cable in distribution centres Strain-relieved igtail Ideal for alications involving safety requirements in case of fire Design Tube semi-tight tubes 0.9 mm, stried u to 2 m Strain relief aramide yarn Jacket materiallsfh Tube colour E9 yellow G50 OM2 orange G50 OM3 turquoise G50 OM4 heather violet G50 OM5 lime green G62.5 OM1 orange According to IEC Ordering information /CHJH /CHJH Please see age 145. * DTAG Deutsche Telekom AG 40 HUBER+SUHNER Fiber Otic Cables

41 Simlex cables according DTAG* secification Secification Jacket Ø mm Tube Ø mm Arox weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius 1) during installation mm IEC E11 in service mm Crush resistance N/dm IEC E3 Imact resistance W = 0.74 J imacts 10 IEC E4 W = 1.5 J 3 Thermal roerties Temerature range during installation C 10 to to +50 IEC F12 in service C 25 to to +70 in storage C 25 to to +70 Combustion roerties Fire load MJ/m Fire roagation on vertical single cable on vertical cable bundle IEC IEC Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant (EU) No 305/2011 (CPR) Dca-s1a, d0, a1 EN = assed 1) Smaller bending radius are ossible with E9/125 LowBend (ITU G.657) and G50/125-OM3/OM4 bend otimised. HUBER+SUHNER Fiber Otic Cables 41

42 Dulex figure 8 (zi cord) Proerties Metal free indoor cable Each fiber strain relieved For direct connector assembly with strain relief Tight bending radii For high thermal stability Halogen free and non-corrosive fire gases Jacket material according to UL 94V-0 Low fire load for high safety requirements Alications Installation in indoor area Patch cable in distribution centres Data cable in distribution networks Ideal for alications involving safety requirements in case of fire Design Tube 2 semi-tight tubes 0.9 mm 2 tight tubes 0.6 mm/0.9 mm Strain relief aramide yarn Jacket materiallsfh Tube colour E9 yellow G50 OM2 orange G50 OM3 turquoise G50 OM4 heather violet G50 OM5 lime green G62.5 OM1 orange According to IEC Ordering information /VJH /FJH /CWJH /CWJH /CWJH Please see age 146, HUBER+SUHNER Fiber Otic Cables

43 Dulex figure 8 (zi cord) Secification Jacket Ø mm 1.4 x x x x x 5.5 Single fiber cable Ø mm Tube Ø mm 0.6 tight 0.9 tight 0.9 semi-tight 0.9 semi-tight 0.9 semi-tight Channel marking on single fiber Arox weight kg/km inscrition on one side Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius 1) during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Imact resistance W = 0.74 J imacts IEC E4 W = 1.0 J Reeated bending r = 25 mm, weight = 0.5 kg cycles IEC E6 Thermal roerties Temerature range during installation C 10 to to to to to +50 IEC F1 in service C 25 to to to to to +70 in storage C 40 to to to to to +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical IEC single cable on a vertical IEC cable bundle Halogen jacket material IEC acid gas Degree of acidity jacket material IEC /65/EC (RoHS) comliant (EU) No 305/2011 (CPR) Dca-s1a, d0, a1 EN = assed 1) Smaller bending radius are ossible with E9/125 LowBend (ITU G.657) and G50/125-OM3/OM4 BendOtimized HUBER+SUHNER Fiber Otic Cables 43

44 Dulex cables figure 0 Proerties Metal free indoor cable Each fiber strain relieved For direct connector assembly with strain relief Tight bending radii Low fire load for high safety requirements Jacket material according to UL 94V-0 Halogen free and non-corrosive fire gases Alications Installation in indoor area Patch cable in distribution centres Data cable in distribution networks Ideal for alications involving safety requirements in case of fire Design Tube 2 simlex cables with semi-tight tubes 0.9 mm 2 simlex cables with tight tubes 0.6 mm Strain relief aramide yarn Jacket materiallsfh Tube colour E9 yellow G50 OM2 orange G50 OM3 turquoise G50 OM4 heather violet G50 OM5 lime green According to IEC G62.5 OM1 orange Ordering information /VJH-A /CWJH-A /CWJH-A...27 Please see age HUBER+SUHNER Fiber Otic Cables

45 Dulex cables figure 0 Secification Jacket Ø mm Single fiber cable Ø mm Tube Ø mm 0.6 tight 0.9 semi-tight 0.9 semi-tight Channel marking on single cable numbered numbered coloured Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius 1) during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Imact resistance W = 1.0 J imacts IEC E4 Reeated bending r = 25 mm, weight = 0.5 kg cycles IEC E6 Thermal roerties Temerature range during installation C 10 to to to +50 IEC F12 in service C 25 to to to +70 in storage C 25 to to to +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical single cable IEC on a vertical cable bundle IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant (EU) No 305/2011 (CPR) Dca-s1a, d0, a1 EN = assed 1) Smaller bending radius are ossible with E9/125 LowBend (ITU G.657) and G50/125-OM3/OM4 BendOtimized. HUBER+SUHNER Fiber Otic Cables 45

46 Dulex round cables (LC uniboot comatible) Proerties Metal free indoor cable Strain relieve with aramide yarn For direct connector assembly Tight bending radii High flexibility Low smoke, halogen free and self-extinguishing Jacket material according to UL 94V-0 LC uniboot comatible Alications Patch cables for data centers Dulex cable for LC uniboot Design Tube 2 tight buffered tubes 0.6 mm Strain relief aramide yarn Jacket materiallsfh Tube colour E9 low bend yellow G50 OM3 turquoise G50 OM4 heather violet G50 OM5 lime green According to IEC Ordering information /V(ZN)H Please see age HUBER+SUHNER Fiber Otic Cables

47 Dulex round cables (LC uniboot comatible) Secification Jacket Ø mm 2.1 Tube Ø mm 0.6 tight Arox. weight kg/km 4.3 Mechanical roerties Tensile strength during installation N 200 IEC E1 in service N 100 Min. bend radius during installation mm 15 IEC E11 in service mm 10 Crush resistance short-term N/dm 5000 IEC E3 long-term N/dm 900 Kink resistance radius 3 mm IEC E10 Thermal roerties Temerature range during installation C 10 to +50 IEC F1 in service C 25 to +70 in storage C 25 to +70 Combustion roerties Fire load MJ/m 0.11 Fire roagation on a vertical single cable IEC on a vertical cable bundle IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant (EU) No 305/2011 (CPR) Dca-s1a, d0, a1 EN = assed HUBER+SUHNER Fiber Otic Cables 47

48 Otiack cable with 8, 12 and 24 fibers Proerties Metal free indoor cable Strain relief with aramide yarn For direct connector assembly with strain relief Tight bending radii Low smoke, halogen free and self-extinguishing Otimized outer-diameter construction Ruggedized and non-ruggedized cable construction Alications data center Fits multi fiber connectors (as MPO/MTP ) Design Strain relief aramide yarn Jacket materiallsfh Tube colour E9 low bend yellow G50 OM3 turquoise G50 OM4 heather violet G50 - OM5 lime green According to IEC Ordering information 08- /(ZN)H /(ZN)H /(ZN)H /(ZN)H /(ZN)H /(ZN)H- 36 Please see age HUBER+SUHNER Fiber Otic Cables

49 Otiack cable with 8, 12 and 24 fibers Secification Tye Non-ruggedized Ruggedized No. of fibers fibers 8 and and 12 Jacket Ø mm Arox weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance during installation N/dm IEC E3 in service N/dm Imact resistance W=0.5J IEC E4 W=1.0J imacts Kink resistance r=5mm IEC E10 Thermal roerties Temerature range during installation C 10 to +50 IEC F12 in service C 10 to +60 in storage C 20 to to to to to to to +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical single cable IEC on a vertical cable bundle IEC Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant (EU) No 305/2011 (CPR) Dca-s1a, d0, a1 EN = assed HUBER+SUHNER Fiber Otic Cables 49

50 Breakout cables 1.4 mm Proerties Metal free indoor cable Each fiber strain relieved For direct connector assembly with strain relieved Ricord for easy jacket removal Low smoke, halogen free and self-extinguishing Otimized outer-diameter construction Alications Installation in indoor areas Data cable in distribution networks For installations in cable ducts For horizontal and collased backbone cabling Terminations ossible for SFF connectors only Design Cable design central strength member, non-metallic 12 to 24 single fiber cables with tight buffered tube 0.6 mm strain relief (aramide yarn) searating tae and 1 ricord Channel marketing single fiber cable numbered Jacket material LSFH Tube/jacket colour E9 yellow G50 OM3 turquoise G50 OM4 heather violet G50 OM5 lime green According to IEC G62.5 OM1 orange Ordering information /VJSNH /VJSNH /VJSNH Please see age HUBER+SUHNER Fiber Otic Cables

51 Breakout cables 1.4 mm Secification Jacket Ø mm Single fiber cable Ø mm numbered Tube Ø mm Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Imact resistance W = 2.21 J imacts IEC E4 Reeated bending r = 100 mm cycles IEC E6 r = 200 mm 2000 Thermal roerties Temerature range during installation C 10 to +60 IEC F1 in service C 25 to +70 in storage C 25 to +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical single cable IEC on a vertical cable bundle IEC Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant comliant comliant (EU) No 305/2011 (CPR) * ** *** EN = assed * Dca-s2, d2, a1 ** Dca-s1a, d2, a1 *** Cca-s1a, d0, a1 HUBER+SUHNER Fiber Otic Cables 51

52 Breakout cables 2.0 mm Proerties Metal free indoor cable Each fiber strain relieved For direct connector assembly with strain relief Ricord for easy jacket removal Low smoke, halogen free and self-extinguishing Cable with imroved fire erformance Alications Installation in indoor areas Data cable in distribution networks For installation in cable ducts Deal for alications involving high safety requirements in case of fire For horizontal and collased backbone cabling Design Cable design Channel marketing central strengh member, non-metallic 4 to 24 single fiber cables with semi-tight tubes strain relief (aramide yarn) searating tae and 1 ricord single fiber cable numbered Jacket material LSFH Tube/jacket colour E9 yellow G50 OM2 orange G50 OM3 turquoise G50 OM4 heather violet G50 OM5 lime green G62.5 OM1 orange According to IEC Ordering information /CWJSNH /CWJSNH /CWJSNH /CWJSNH Please see age 149. Arovals DNV GL Tye aroved Certificate No. TAE R 52 HUBER+SUHNER Fiber Otic Cables

53 Breakout cables 2.0 mm Secification Jacket Ø mm Single fiber cable Ø mm numbered Tube Ø mm Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Imact resistance W = 2.21 J, r = 25 mm imacts IEC E4 Torsion ± 360, l = 1000 mm m = 2 kg cycles IEC E7 Thermal roerties Temerature range during installation C 10 to +60 IEC F12 in service C 25 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical single cable IEC on a vertical cable bundle IEC Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant (EU) No 305/2011 (CPR) * ** ** *** EN = assed * Dca-s1a, d0, a1 ** Cca-s1a, d2, a1 *** Cca-s1a, d1, a1 HUBER+SUHNER Fiber Otic Cables 53

54 Fire resistant breakout cables 2.0 mm Proerties Metal free indoor cable Each fiber strain relieved For direct connector assembly with strain relief Ricord for easy jacket removal Low smoke, halogen free and self-extinguishing Cable with imroved fire erformance Alications Installation in indoor areas Data cable in distribution networks For installation in cable ducts Ideal for alications involving high safety requirements in case of fire For horizontal and collased backbone cabling Design Cable design Channel marketing Jacket material central strengh member, non-metallic 4 to 12 single fiber cables with semi-tight tubes strain relief (aramide yarn) searating tae and 1 ricord single fiber cable numbred LSFH double jacket with flame barrier Tube/jacket colour E9 yellow G50 OM2 orange G50 OM3 turquoise G50 OM4 heather violet G50 OM5 lime green G62.5 OM1 orange According to IEC Ordering information /CWJSNHIH /CWJSNHIH /CWJSNHIH Please see age 150. Arovals DNV GL Tye aroved Certificate No. TAE HUBER+SUHNER Fiber Otic Cables

55 Fire resistant breakout cables 2.0 mm Secification Jacket Ø mm Single fiber cable Ø mm numbered Tube Ø mm Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Imact resistance W = 2.21 J, r = 25 mm imacts IEC E4 Reeated bending r = 100 mm cycles IEC E6 Thermal roerties Temerature range during installation C 10 to +60 IEC F12 in service C 25 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical single cable IEC on a vertical cable bundle IEC Fire test with circuit integrity (CI) min IEC Fire test with circuit integrity (CI) min IEC with shock Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant = assed HUBER+SUHNER Fiber Otic Cables 55

56 Otiack breakout cables with 16 to144 fibers Proerties Single tubes with 8 or12 fibers Metal free indoor cable Strain relieved with aramide yarn Ricord for easy jacket removal Low smoke, halogen free and self-extinguishing Cable with imroved fire erformance Alications Installation in indoor areas Data center in distribution networks Ideal for alications involving high safety requirements in case of fire For horizontal and collased backbone cabling Fits multi fiber connectors ( MPO/MTP ) Design Cable design central strength member, non-metallic 16 to 144 otical fibers strain relief (aramide yarn) searating tae and 1 ricord Jacket materiallsfh Channel marketing single fiber cable numbered Tube/jacket colour E9 low bend yellow G50 OM3 turquoise G50 OM4 heather violet G50 OM5 lime green According to IEC Ordering information 16-8 /(ZN)SNH /(ZN)SNH /(ZN)SNH /(ZN)SNH /(ZN)SNH /(ZN)SNH /(ZN)SNH /(ZN)SNH /(ZN)SNH /(ZN)SNH- 20 Please see age HUBER+SUHNER Fiber Otic Cables

57 Otiack breakout cables with 16 to144 fibers Secification Single cable fiber 8 fiber 16/ count 12 fiber 24/ Jacket Ø mm Single cable Ø mm numbered Arox. Weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N 4 x x x x 100 Min. bend radius during installation mm IEC E11 in service mm Crush resistance during installation N/dm IEC E3 in service N/dm Imact resistance W=1.0J imacts IEC E4 Kink resistance r=20mm IEC E10 r=30mm Thermal roerties Temerature range during installation C 10 to +50 IEC F12 in service C 10 to +70 in storage C 20 to +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical single cable on a vertical cable bundle IEC IEC Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant (EU) No 305/2011 (CPR) */** *** *** */** EN = assed * B2ca-s1a, d0, a1 ** Cca-s1a, d0, a1 *** classes on request HUBER+SUHNER Fiber Otic Cables 57

58 Otiack breakout cables with 48 to 288 fibers Proerties Single tubes with 24 fibers Metal free indoor cable Strain relieved with aramide yarn Ricord for easy jacket removal Low smoke, halogen free and self-extinguishing Cable with imroved fire erformance Alications Installation in indoor areas Data cable in distribution networks Ideal for alications involving high safety requirements in case of fire For horizontal and collased backbone cabling Fits multi fiber connectors (MPO/MTP ) Design Cable design central strength member, non-metallic 48 to 288 otical fibers strain relief (aramide yarn) searating tae and 1 ricord Jacket materiallsfh Channel marketing single fiber cable numbred Tube/jacket colour E9 low bend yellow G50 OM3 turquoise G50 OM4 heather violet G50 OM5 lime green According to IEC Ordering information /(ZN)SNH /(ZN)SNH /(ZN)SNH- 30 Please see age HUBER+SUHNER Fiber Otic Cables

59 Otiack breakout cables with 48 to 288 fibers Secification Single cable fiber count Jacket Ø mm Single cable Ø mm numbered Arox. Weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N 4 x x x 100 Min. bend radius during installation mm IEC E11 in service mm Crush resistance during installation N/dm IEC E3 in service N/dm Imact resistance W=1.0J imacts IEC E4 Kink resistance r=25mm IEC E10 Thermal roerties Temerature range during installation C 10 to +50 IEC F12 in service C 10 to +70 in storage C 20 to +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical single cable IEC on a vertical cable bundle IEC Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant (EU) No 305/2011 (CPR) */** *** */** EN = assed * B2ca-s1a, d0, a1 ** Cca-s1a, d0, a1 *** classes on request HUBER+SUHNER Fiber Otic Cables 59

60 Riser cables (distribution cables) Proerties Metal free indoor cable Strain relief with aramide yarn For direct connector assembly Ricord for easy jacket removal For high mechanical and thermal stability Low smoke, halogen free and self-extinguishing Alications Internal building distribution Rising zone/lan Alications with high safety requirements For horizontal and collased backbone cabling Design Cable design Tube colour Jacket material Outer jacket colour central strengh member, non-metallic 4 to 24 tight tube fibers strain relief (aramide yarn) 1 ricord according to colour code LSFH black According to IEC Ordering information /FSN(ZN)H /FSN(ZN)H /FSN(ZN)H Please see age HUBER+SUHNER Fiber Otic Cables

61 Riser cables (distribution cables) Secification fiber Jacket Ø mm Tube Ø mm coloured Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius 1) during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Imact resistance W = 2.21 J imacts IEC E4 Reeated bending r = 50 mm cycles IEC E6 Thermal roerties Temerature range during installation C 10 to +50 IEC F1 in service C 20 to +70 in storage C 25 to +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical single cable IEC on a vertical cable bundle IEC Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant (EU) No 305/2011 (CPR) Dca-s2, d0, a1 EN = assed 1) Smaller bending radius are ossible with E9/125 LowBend (ITU G.657) and G50/125-OM3/OM4 BendOtimized. HUBER+SUHNER Fiber Otic Cables 61

62 FTTH simlex indoor cables Proerties Metal free indoor cable Strain relief with aramide yarn Tube can be stried u to 1 m in one iece For direct connector assembly Tight bending radii Low smoke, halogen free and non-corrosive Jacket material according to UL94V-0 Alications Data cable in distribution network FTTH Installation in indoor areas For horizontal and collased backbone cabling Design Cable design 1 semi-tight tube Strain relief aramide yarn Jacket materiallsfh Jacket colour white/grey According to IEC Ordering information 01-E9A2/CWJH FG Please see age HUBER+SUHNER Fiber Otic Cables

63 FTTH simlex indoor cables Secification Jacket Ø mm 2.7 Tube Ø mm 0.9 Arox. weight kg/km 7.0 Mechanical roerties Tensile strength during installation N 400 IEC E1 in service N 200 Min. bend radius 1) during installation mm 50 IEC E11 in service mm 25 Crush resistance short-term N/dm 7000 IEC E3 long-term N/dm 5000 Imact resistance W = 1.0 J imacts 20 IEC E4 Reeated bending r = 25 mm cycles 5000 IEC E6 Thermal roerties Temerature range during installation C 10 to +50 IEC F12 in service C 25 to +70 in storage C 25 to +70 Combustion roerties Fire load MJ/m 0.17 Fire roagation on a vertical single cable IEC on a vertical cable bundle IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant (EU) No 305/2011 (CPR) Dca-s1a, d0, a1 EN = assed 1) Smaller bending radius are ossible with E9/125 LowBend (ITU G.657) and G50/125-OM3/OM4 BendOtimized. HUBER+SUHNER Fiber Otic Cables 63

64 FTTH Microtube Proerties Metal free indoor cable Strain relieved with aramide yarn Ricord for easy jacket removal No need for cleaning the fibers (jelly free) Tight bending radii Halogen free and non-corrosive fire gases Jacket material according to UL 94V-0 Easy striing Alications Data cable in distribution network FTTH Installation in indoor areas For horizontal and collased backbone cabling Design Cable design Microtube dry with 4 fibers Strain relief aramide yarn Jacket materiallsfh Jacket colour white/grey/yellow According to IEC Ordering information 04-E9A2/MH(ZN)H Please see age HUBER+SUHNER Fiber Otic Cables

65 FTTH Microtube Secification Number of fibers 4 Jacket Ø mm 2.3 Arox. weight kg/km 5.2 Mechanical roerties Tensile strength during installation N 400 IEC E1 in service N 200 Min. bend radius during installation mm 10 IEC E11 in service mm 10 Crush resistance short-term N/dm 1000 IEC E3 long-term N/dm 500 Imact resistance W = 1 J imacts 3 IEC E4 Kink resistance r = 5 mm IEC E10 Thermal roerties Temerature range during installation C 5 to +50 IEC F1 in service C 10 to +60 in storage C 20 to +70 Combustion roerties Fire load MJ/m 0.09 Fire roagation on a vertical single calbe on a vertical calbe bundle IEC IEC Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant (EU) No 305/2011 (CPR) Dca-s1a, d0, a1 EN = assed HUBER+SUHNER Fiber Otic Cables 65

66 FTTH indoor cables with tight tubes 0.6 mm Proerties Metal free indoor and outdoor cable Strain relieved with aramide yarn For direct connector assembly Tight bending radii Halogen free and non-corrosive fire gases Otimized outer-diameter construction Alications Data cable in distribution network FTTH Installation in indoor areas For horizontal and collased backbone cabling Design Cable design 4 tight tubes buffered 0.6 mm, easy striing Strain relief aramide yarn Jacket materiallsfh Jacket colour grey According to IEC Ordering information 04-E9A2/V(ZN)H Please see age HUBER+SUHNER Fiber Otic Cables

67 FTTH indoor cables with tight tubes 0.6 mm Secification Number of fibers mm 4 Jacket Ø 2.8 Tube Ø mm 0.6 easy striing/coloured Arox. weight kg/km 8 Mechanical roerties Tensile strength during installation N 400 IEC E1 in service N 200 Min. bend radius during installation mm 7.5 IEC E11 in service mm 7.5 Crush resistance short-term N/dm 2000 IEC E3 long-term N/dm 1000 Imact resistance W = 1 J imacts 5 IEC E4 Reeated bending r = 30 mm cycles 5000 IEC E6 Kink resistance r = 6 mm cycles IEC E10 Coiling caability length = 100 m/r = 70 mm cycles 3 HUBER+SUHNER Thermal roerties Temerature range during installation C 20 to +70 IEC F1 in service C 40 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m 0.19 Fire roagation on a vertical single cable IEC Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant (EU) No 305/2011 (CPR) Dca-s1a, d0, a1 EN = assed HUBER+SUHNER Fiber Otic Cables 67

68 FTTH indoor cables HOMESTAR Proerties Metal free indoor and outdoor cable Strain relieved with aramide yarn For direct connector assembly Tight bending radii Low smoke, halogenfree and self-extinguishing Alications Data cable in distribution network FTTH Installation in indoor areas For horizontal and collased backbone cabling Design Cable design Strain relief central strength member, non-metallic 1, 2 to 4 tight buffered tubes aramide yarn Jacket materiallsfh Jacket colour grey According to IEC Ordering information 01-E9A.../F(ZN)H E9A.../FSN(ZN)H E9A.../FSN(ZN)H Please see age HUBER+SUHNER Fiber Otic Cables

69 FTTH indoor cables HOMESTAR Secification Number of fibers Jacket Ø mm Tube Ø mm coloured Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Imact resistance W = 2.21 J imacts IEC E4 Reeated bending r = 30 mm cycles IEC E6 Kink resistance r = 7.5 mm IEC E10 Torsion angle = ± 360 / cycles IEC E7 length = 500 mm H+S Crush resistance short-term long-term N/5 mm N/5 mm HUBER+SUHNER Thermal roerties Temerature range during installation C 10 to +50 IEC F1 in service C 25 to +70 in storage C 25 to +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical single cable IEC Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant = assed HUBER+SUHNER Fiber Otic Cables 69

70 Universal cables Cable tye Page Ordering key Weight kg/km Amount of fibers Jelly free dry block multi-fiber loose tube u to 24 fibers /BQ(ZN)H /Q(ZN)H u to 12 u to 24 Jelly free - dry block glass-armoured multi fiber loose tube u to 24 fibers /Q(ZNG)H /Q(ZNG)H /Q(ZNG)H /Q(ZNG)H u to 24 u to 24 u to 24 u to 24 Jelly free - dry block glass-armoured multi fiber loose tube Twintube u to 24 fibers /Q(ZNG)H u to 48 Jelly free - dry block glass-armoured multi fiber loose tube u to 144 fibers /BQSN(ZNG)H /BQSN(ZNG)H /BQSN(ZNG)H /BQSN(ZNG)H /BQSN(ZNG)H u to 24 u to 48 u to 72 u to 96 u to 144 Non-armoured multi-fiber loose tube u to 24 fibers /BW(ZN)H /W(ZNG)H u to 12 u to 24 Glass-armoured multi-fiber loose tube u to 24 fibers /W(ZNG)H /W(ZNG)H /W(ZNG)H u to 24 u to 24 u to 24 Glass-armoured multi-fiber loose tube TWINTUBE u to 24 fibers /W(ZNG)H u to 24 Glass-armoured multi-fiber loose tube u to 144 fibers Steel-armoured multi-fiber loose tube u to 24 fibers /BWSN(ZNG)H /BWSN(ZNG)H /BWSN(ZNG)H /BWSN(ZNG)H /BWSN(ZNG)H u to 24 u to 48 u to 72 u to 96 u to /W(ZN)HAH u to HUBER+SUHNER Fiber Otic Cables

71 Multi-fiber loose tube Jacket Ø mm Jacket material Rodent rotection Tensile strength N Crush resistance N/dm Temerature range (in service) C Fire roagation IEC Fire roagation IEC CPR 2011/305/EU mini standard LSFH LSFH to to +70 standard standard standard standard LSFH LSFH LSFH LSFH to to to to +70 Dca-s1a, d2, a1 Cca-s1a, d0, a1 Dca-s1a, d0, a1 B2ca-s1a, d0, a1 standard 8.8 x 9.4 LSFH to +70 Dca-s1a, d0, a1 mini mini mini mini mini LSFH LSFH LSFH LSFH LSFH to to to to to +70 Dca-s1a, d0, a1 Dca-s1a, d0, a1 Dca-s2, d0, a1 Dca-s2, d0, a1 Eca mini standard LSFH LSFH to to +70 standard standard standard LSFH LSFH LSFH to to to +70 Dca-s2, d1, a1 Dca-s1a, d0, a1 standard LSFH to +70 Dca-s2, d2, a1 mini mini mini mini mini LSFH LSFH LSFH LSFH LSFH to to to to to +70 standard 8.0 LSFH to +70 Dca-s1a, d0, a1 Dca-s1a, d0, a1 HUBER+SUHNER Fiber Otic Cables 71

72 Universal cables Cable tye Page Ordering key Weight kg/km Amount of fibers Steel-armoured multi-fiber loose tube TWINTUBE u to 24 fibers /W(ZNG)HAH u to 24 Steel-armoured multi-fiber loose tube u to 72 fibers /BWSN(ZNG)HAH /BWSN(ZNG)HAH u to 48 u to 72 RADOX multi-fiber loose tube u to 24 fibers /W(ZNG)R u to 24 = assed 72 HUBER+SUHNER Fiber Otic Cables

73 Multi-fiber loose tube Jacket Ø mm Jacket material Rodent rotection Tensile strength N Crush resistance N/dm Temerature range (in service) C Fire roagation IEC Fire roagation IEC CPR 2011/305/EU standard 12.5 LSFH to +70 mini mini LSFH LSFH to to +70 standard 8.5 RADOX to +85 Cca-s1a, d0, a1 HUBER+SUHNER Fiber Otic Cables 73

74 Jellyfree multi-fiber loose tube cables u to 24 fibers Proerties Metal free indoor and outdoor cable Jelly free Strain relief with aramide yarn Ricord for easy jacket removal Low smoke, halogen free and self-extinguishing Low fire load for high safety requirements No need for cleaning the fibers Alications Data cable in distribution networks For vertical alications u to 500 m For installation in cable ducts Design Cable design dry multi-fiber loose tube with 2 u to 24 fibers 1 ricord Strain relief aramide yarn Fiber colour according to colour code Jacket material LSFH Jacket colour E9 yellow G50 - OM2 orange G50 - OM3 turquoise G 50 - OM4 heather violet G50 OM5 lime green G OM1 orange According to IEC Ordering information /BQ(ZN)H /Q(ZN)H- 50 Please see age HUBER+SUHNER Fiber Otic Cables

75 Jellyfree multi-fiber loose tube cables u to 24 fibers Secification Jacket Ø mm Number of fibers 2 to 12 2 to 24 Mulit fiber loose tube mm mini standard Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Thermal roerties Temerature range during installation C 10 to to +50 IEC F1 in service C 25 to to +70 in storage C 25 to to +70 Combustion roerties Fire load MJ/m Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant = assed HUBER+SUHNER Fiber Otic Cables 75

76 Jellyfree glass-armoured multi-fiber loose tube cables u to 24 fibers Proerties Metal free indoor and outdoor cable Jelly free, no need for cleaning the fibers Rodent-rotected, glass-armoured Low smoke, halogen free and self-extinguishing Longitudinal and transversal watertight cable Alications Data cable in distribution networks For vertical alications u to 500 m For installation in cable ducts For high safety requirements in case of fire Design Cable design dry multi-fiber loose tube with u to 24 fibers Strain relief and rodent rotection glass roving Fiber colour according to colour code Jacket material LSFH Jacket colour colour coded According to IEC Ordering information /Q(ZNG)H * /Q(ZNG)H /Q(ZNG)H Please see age 155, 156. Arovals * UL listed acc. OFNR/OFNG/OFN (only with CPR class Dca-s1a, d2, a1) 76 HUBER+SUHNER Fiber Otic Cables

77 Jellyfree glass-armoured multi-fiber loose tube cables u to 24 fibers Secification Jacket Ø mm Number of fibers 2 to 24 2 to 24 2 to 24 Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Imact resistance W = 1 J imacts 100 IEC E4 W = 4.4 J 30 W = 4.5 J 500 Thermal roerties Temerature range during installation C 10 to +50 IEC F1 in service C 40 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical single cable IEC Fire roagation on vertical cable bundle IEC Smoke density IEC Water enetration h = 1 m, 24 h, < 3 m IEC F5B 2011/65/EC (RoHS) comliant (EU) No 305/2011 (CPR) ** *** * EN **** = assed * B2ca-s1a,d0,a1 ** Cca-s1a,d0,a1 *** Dca-s1a,d0,a1 **** Dca-s1a,d2,a1 HUBER+SUHNER Fiber Otic Cables 77

78 Jellyfree glass-armoured multi-fiber loose tube cables TWINTUBE u to 24 fibers Proerties Metal free indoor and outdoor cable Jellyfree, no need for cleaning the fiber Rodent-rotected, glass-armoured Ricord for easy jacket removal Low smoke, halogen free and self-extinguishing Longitudinal and transversal watertight cable Alications For installations directly in the ground and in mechanically unrotected environments As data cable in distribution networks For installation outdoor, in wet cable ducts and ies Ideal for alications involving high safety requirements in case of a fire Design Cable design Strain relief and rodent rotection Jacket material Jacket colour 2 multi-fiber loose tubes, jelly-filled with 2 x 12 fibers 2 ricords glass-roving LSFH colour coded Gemäss IEC Ordering information /Q(ZNG)H Please see age HUBER+SUHNER Fiber Otic Cables

79 Jellyfree glass-armoured multi-fiber loose tube cables TWINTUBE u to 24 fibers Secification Jacket Ø mm Number of fibers 2 12 Arox. weight kg/km 101 Mechanical roerties Tensile strength during installation N 3000 IEC E1 in service N 1500 Min. bend radius during installation mm 150 1) IEC E11 in service mm 100 1) Crush resistance short-term N/dm ) IEC E3 long-term N/dm ) Water enetration h = 1 m, 24 h, < 3 m b IEC F5B Thermal roerties Temerature range during installation C 10 to +50 IEC F1 in service C 20 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m 1.85 Fire roagation on a vertical single cable IEC Fire test with circuit integrity (CI) min. 180 IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant (EU) No 305/2011 (CPR) Dca-s1a, d0, a1 EN = assed 1) refers to the flat side of the cable HUBER+SUHNER Fiber Otic Cables 79

80 Jellyfree glass-armoured multi-fiber loose tube cables u to 144 fibers Proerties Metal free indoor and outdoor cable Jellyfree, no need for cleaning the fiber Rodent rotection, glass-armoured Ricord for easy jacket removal Jacket material according to UL 94V-0 Low smoke, halogen free and self-extinguishing Longitudinal and transversal watertight cable Alications Data cable in distribution networks For alications involving high safety requirements in case of fire Design Cable design Strain relief and rodent rotection Jacket material Jacket colour 4 to 12 multi-fiber loose tube, jelly-free with 2 to 12 fibers strength member 2 ricords glass-roving LSFH colour coded According to IEC Ordering information /BQSN(ZNG)H /BQSN(ZNG)H /BQSN(ZNG)H /BQSN(ZNG)H /BQSN(ZNG)H Please see age HUBER+SUHNER Fiber Otic Cables

81 Jellyfree glass-armoured multi-fiber loose tube cables u to 144 fibers Secification Number of fibers 24/ Jacket Ø mm Number of fibers Mini Mini Mini Mini Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Imact resistance W = 2.21 J imact IEC E4 Water enetration h = 1 m, 24 h, < 3 m IEC F5A Thermal roerties Temerature range during installation C 10 bis +50 IEC F1 in service C 40 bis +70 in storage C 40 bis +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical single cable IEC Fire roagation on vertical cable bundle IEC Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) konform (EU) No 305/2011 (CPR) * ** ** *** EN = assed * Dca-s1a, d0, a1 ** Dca-s2, d0, a1 *** Eca HUBER+SUHNER Fiber Otic Cables 81

82 Non-armoured multi-fiber loose tube cables u to 24 fibers Proerties Metal free indoor and outdoor cable Strain relief with aramide yarn Ricord for easy jacket removal Low smoke, halogen free and self-extinguishing For use in ducts and in unrotected environment Alications Data cable in distribution networks Installation in indoor and outdoor areas For installation in cable ducts Design Cable design multi-fiber loose tube with 2 u to 24 fibers, jelly-filled 1 ricord Strain relief aramide yarn Fiber colour according to colour code Jacket material LSFH Jacket colour black According to IEC Ordering information /BW(ZN)H /W(ZN)H Please see age 157, HUBER+SUHNER Fiber Otic Cables

83 Non-armoured multi-fiber loose tube cables u to 24 fibers Secification Jacket Ø mm Number of fibers 2 to 12 2 to 24 Multi fiber loose tube mini standard Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Imact resistance W = 1.4 J imacts 50 IEC E4 W = 2.21 J 50 Reeated bending r = 35 mm/1 kg cycles 5000 IEC E6 r = 50 mm/1 kg 5000 Thermal roerties Temerature range during installation C 10 to to +50 IEC F1 in service C 40 to to +70 in storage C 40 to to +70 Combustion roerties Fire load MJ/m Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant = assed HUBER+SUHNER Fiber Otic Cables 83

84 Glass-armoured multi-fiber loose tube cables u to 24 fibers Proerties Metal free indoor and outdoor cable Rodent rotection, glass-armoured For high mechanical requirements Low smoke, halogen free and self-extinguishing Low fire load for high safety requirments Longitudinal and transversal watertight cable Alications For installation directly in the ground and in mechanically unrotected environments Data cable in distribution networks For installation outdoor, in wet cable ducts and ies Ideal for high safety requirements in case of a fire Design Cable design Strain relief and rodent rotection Fiber colour Jacket material Jacket colour multi-fiber loose tube u to 24 fibers, jelly-filled glass-roving according to colour code LSFH black According to IEC Ordering information /W(ZNG)H /W(ZNG)H * /W(ZNG)H Please see age 158, 159, 160. Arovals * UL listed acc. OFN/OFNG 84 HUBER+SUHNER Fiber Otic Cables

85 Glass-armoured multi-fiber loose tube cables u to 24 fibers Secification Jacket Ø mm Number of fibers 2 to 24 2 to 24 2 to 24 Multi fiber loose tube standard standard standard Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Imact resistance W = 1.5 J imacts 100 IEC E4 W = 4.41 J 30 W = 4.5 J 500 Reeated bending r = 50 mm/2.5 kg cycles IEC E6 Torsion ± 1440, length 1 m cycles IEC E7 Water enetration h = 1 m, 48 h, < 3 m IEC F5B Thermal roerties Temerature range during installation C 10 to to to +50 IEC F1 in service C 40 to to to +70 in storage C 40 to to to +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical single cable IEC Fire roagation on a vertical cable bundle IEC Fire test with circuit integrity (CI) min IEC Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant (EU) No 305/2011 (CPR) * ** EN = assed * Dca-s2, d1, a1 ** Dca-s1a, d0, a1 HUBER+SUHNER Fiber Otic Cables 85

86 Glass-armoured multi-fiber loose tube cables TWINTUBE u to 24 fibers Proerties Metal free indoor and outdoor cable Rodent-rotected, glass-armoured Ricord for easy jacket removal Low smoke, halogen free and self-extinguishing Longitudinal and transversal watertight cable Alications For installations directly in the ground and in mechanically unrotected environments As data cable in distribution networks For installation outdoor, in wet cable ducts and ies Ideal for alications involving high safety requirements in case of a fire Design Cable design 2 multi-fiber loose tubes, jelly-filled with 2 x 12 fibers 2 ricords Strain relief and rodent rotection glass-roving Jacket material Jacket colour LSFH black According to IEC Ordering information /W(ZNG)H Please see age HUBER+SUHNER Fiber Otic Cables

87 Glass-armoured multi-fiber loose tube cables TWINTUBE u to 24 fibers Secification Jacket Ø mm Number of fibers 2 12 Arox. weight kg/km 101 Mechanical roerties Tensile strength during installation N 3000 IEC E1 in service N 1500 Min. bend radius during installation mm 150 1) IEC E11 in service mm 100 1) Crush resistance short-term N/dm ) IEC E3 long-term N/dm ) Water enetration h = 1 m, 24 h, < 3 m IEC F5B Thermal roerties Temerature range during installation C 10 to +50 IEC F1 in service C 20 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m 1.85 Fire roagation on a vertical single cable IEC Fire test with circuit integrity (CI) min. 180 IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant (EU) No 305/2011 (CPR) Dca-s2, d2, a1 EN = assed 1) refers to the flat side of the cable HUBER+SUHNER Fiber Otic Cables 87

88 Glass-armoured multi-fiber loose tube cables u to 144 fibers Proerties Metal free indoor and outdoor cable Rodent rotection, glass-armoured Ricord for easy jacket removal Jacket material according to UL 94V-0 Low smoke, halogen free and self-extinguishing Longitudinal and transversal watertight cable Alications Data cable in distribution networks For alications involving high safety requirements in case of fire Design Cable design 4 to 12 multi-fiber loose tube, jelly-filled with 2 to 12 fibers strength member 2 ricords Strain relief and rodent rotection glass-roving Jacket material Jacket colour According to IEC LSFH black (otional with 2 orange stries) Ordering information /BWSN(ZNG)H /BWSN(ZNG)H /BWSN(ZNG)H /BWSN(ZNG)H /BWSN(ZNG)H Please see age HUBER+SUHNER Fiber Otic Cables

89 Glass-armoured multi-fiber loose tube cables u to 144 fibers Secification Number of fibers 24/ Jacket Ø mm Multi fiber loose tube mini mini mini mini Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Imact resistance W = 2.21 J imact IEC E4 Water enetration h = 1 m, 24 h, < 3 m IEC F5A Thermal roerties Temerature range during installation C 10 to +50 IEC F1 in service C 40 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical single cable IEC Fire roagation on a vertical cable bundle IEC Fire test with circuit 90min 90min 90min IEC integrity Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant (EU) No 305/2011 (CPR) * EN = assed * Dca-s1a, d0, a1 HUBER+SUHNER Fiber Otic Cables 89

90 Steel-armoured multi-fiber loose tube cables Simlex and TWINTUBE Simlex u to 24 fibers TWINTUBE þ u to 24 fibers Proerties Steel-armoured indoor and outdoor cable Rodent-rotected (steel-armoured) For high mechanical and thermal requirements Low smoke, halogen free and self-extinguishing Low fire load for high safety requirements Alications For outdoor and indoor installations and in mechanically unrotected environments Data cable in distribution networks For installations directly in the ground Design Cable design Strain relief Rodent rotection Jacket material Jacket colour 1 to 2 multi-fiber loose tubes, jelly-filled with 2 to 24 fibers aramid yarn/glass-roving steel-armoured LSFH black According to IEC Ordering information 24- /W(ZN)HAH /W(ZNG)HAH- 125 Please see age HUBER+SUHNER Fiber Otic Cables

91 Steel-armoured multi-fiber loose tube cables Simlex and TWINTUBE Secification Simlex TWINTUBE Jacket Ø mm Number of fibers 2 to 24 2 x 12 Multi-fiber loose tube mm standard standard Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm ) IEC E11 in service mm ) Crush resistance short-term N/dm ) IEC E3 long-term N/dm ) Thermal roerties Temerature range during installation C 10 to to +50 IEC F1 in service C 40 to to +70 in storage C 40 to to +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical single cable IEC Fire roagation on a vertical cable bundle IEC Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC Fire test with circuit integrity (CI) min IEC /65/EC (RoHS) comliant = assed 1) refers to the flat side of the cable HUBER+SUHNER Fiber Otic Cables 91

92 Steel-armoured multi-fiber loose tube cables u to 72 fibers Proerties Steel-armoured indoor and outdoor cable Rodent-rotected (steel-armoured) For use in ducts and unrotected environment For high mechanical requirements Low smoke, halogen free and self-extinguishing Alications For outdoor and indoor installations and in mechanically unrotected environments Data cable in distribution networks For installations directly in the ground Design Cable design 4 to 6 multi-fiber loose tube, jelly-filled with 2 to 12 fibers strength member 2 ricords Strain relief glass-roving Rodent rotection Jacket material Jacket colour steel-armoured LSFH black According to IEC Ordering information 24- /BWSN(ZNG)HAH /BWSN(ZNG)HAH /BWSW(ZNG)HAH- 140 Please see age HUBER+SUHNER Fiber Otic Cables

93 Steel-armoured multi-fiber loose tube cables u to 72 fibers Secification 4 6 Jacket Ø mm Number of fibers 24/48 72 Multi-fiber loose tube mini mini Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Imact resistance W = 2.21 J imacts IEC E4 Thermal roerties Temerature range during installation C 10 to +50 IEC F1 in service C 40 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical single cable IEC Fire roagation on a vertical cable bundle cable IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant = assed HUBER+SUHNER Fiber Otic Cables 93

94 RADOX glass-armoured multi-fiber loose tube cables Proerties Metal free rodent-rotected indoor and outdoor cable High flexibility and form stability UV and ozone resistance High abrasion and soldering iron resistance Halogen free cable with imroved behaviour in case of fire Meets requirements for circuit integrity in case of fire Best oil and fluid resistance Alications Ideal for alications involving safety requirements in case of fire Rolling stock in railway Oil and gas latforms Shis Tunnels Underground train stations Design Cable design multi-fiber loose tube u to 24 fibers, jelly-filled RADOX cable Strain relief glass-roving Jacket material RADOX Jacket colour black According to IEC Ordering information 24- /W(ZNG)R- 85 Please see age HUBER+SUHNER Fiber Otic Cables

95 RADOX glass-armoured multi-fiber loose tube cables Secification Jacket Ø 8.5 Number of fibers 2 to 24 Arox. weight kg/km 88 Mechanical roerties Tensile strength during installation N 3000 IEC E1 in service N 1500 Min. bend radius during installation mm 130 IEC E11 in service mm 80 Crush resistance short-term N/dm IEC E3 long-term N/dm 2500 Imact resistance W = 4.41 J imacts 15 IEC E4 Water enetration h = 1 m, 24 h, < 3 m IEC F5B Thermal roerties Temerature range during installation C 10 to +50 IEC F1 in service C 60 to +85 in storage C 60 to +85 Combustion roerties Fire load MJ/m 1 Fire roagation on a vertical single cable IEC Fire roagation on a vertical bundle cable IEC Fire test with circuit integrity (CI) min. 180 IEC Smoke density IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant (EU) No 305/2011 (CPR) Cca-s1a, d0, a1 EN = assed RADOX Meets LSFH roerties. RADOX jacket material comliant to EM 104 secification of EN for railway rolling stock alication. Fully comliant to CEN/TS for fire safety in railway alications. Meets the increased requirements of SHF2 (SHF Mud) and fulfills flame, fire, oil and mud resistance acc. NEK 606. NEK 606 standard for offshore oil and gas, shi and marine allications. Alication acc. NEK 606: outdoor cable for emergency systems oerational during fire. HUBER+SUHNER Fiber Otic Cables 95

96 Outdoor cables Cable tye Page Ordering key Weight kg/km Amount of fibers Non-armoured multi-fiber loose tube u to 24 fibers /BW(ZN)V /W(ZN)Y u to 12 u to 24 Glass-armoured multi-fiber loose tube u to 24 fibers /W(ZNG)Y /W(ZNG)Y /W(ZNG)Y u to 24 u to 24 u to 24 Glass-armoured multi-fiber loose tube TWINTUBE, u to 24 fibers /W(ZNG)Y u to 24 Glass-armoured multi-fiber loose tube u to 144 fibers Steel-armoured multi-fiber loose tube u to 24 fibers /BWSN(ZNG)V /BWSN(ZNG)V /BWSN(ZNG)V /BWSN(ZNG)V /BWSN(ZNG)V u to 48 u to 48 u to 72 u to 96 u to /W(ZN)YAY u to 24 Steel-armoured multi-fiber loose tube TWINTUBE u to 24 fibers /W(ZNG)YAY u to 24 Steel-armoured multi-fiber loose tube u to 72 fibers /BWSN(ZNG)VAV /BWSN(ZNG)VAV u to 48 u to 72 = assed 96 HUBER+SUHNER Fiber Otic Cables

97 Multi-fiber loose tube Jacket Ø mm Jacket material Rodent rotection Tensile strength N Crush resistance N/dm Temerature range (in service) C mini standard PE PE to to +70 standard standard standard PE PE PE to to to +70 standard PE to +70 mini mini mini mini mini PE PE PE PE PE to to to to to +70 standard 8.0 PE to +70 standard 12.5 PE to +70 mini mini PE PE to to +70 HUBER+SUHNER Fiber Otic Cables 97

98 Non-armoured multi-fiber loose tube cables u to 24 fibers Proerties Metal free outdoor cable Strain relieved with aramide yarn For use in ducts and unrotected environment High chemical resistance against acids and alkalies Halogen free and non-corrosive fire gases Alications Data cable in distribution networks For outdoor installations in humid and wet cable ducts Design Cable design Strain relief Jacket material Jacket colour multi-fiber loose tube with 2 u to 24 fibers, jelly-filled aramide yarn PE black or colour coded According to IEC Ordering information u to /BW(ZN)V u to /W(ZN)Y Please see age HUBER+SUHNER Fiber Otic Cables

99 Non-armoured multi-fiber loose tube cables u to 24 fibers Secification Jacket Ø mm Number of fibers 2 to 12 2 to 24 Multi fiber loose tube mini standard Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Imact resistance W = 1.4 J imacts 50 IEC E4 W = 2.21 J 50 Reeated bending r = 35 mm/1 kg cycles 5000 IEC E6 r = 50 mm/1 kg 5000 Thermal roerties Temerature range during installation C 10 to to +50 IEC F1 in service C 40 to to +70 in storage C 40 to to +70 Combustion roerties Fire load MJ/m /65/EC (RoHS) comliant = assed HUBER+SUHNER Fiber Otic Cables 99

100 Glass-armoured multi-fiber loose tube cables u to 24 fibers Proerties Metal free outdoor cable Rodent rotection, glass-armoured For use in ducts and in unrotected environment High chemical resistance against acids and alkalies For high mechanical and thermal stability Halogen free and non-corrosive fire gases Longitudinal and transversal watertight cable Alications For installation directly in the ground and in mechanically unrotected environments Data cable in distribution networks For installation outdoor, in wet cable ducts and ies Design Cable design Strain relief and rodent rotection Jacket material Jacket colour multi-fiber loose tube with 2 u to 24 fibers, jelly-filled glass-roving PE black According to IEC Ordering information u to /W(ZNG)Y u to /W(ZNG)Y u to /W(ZNG)Y Please see age 162, HUBER+SUHNER Fiber Otic Cables

101 Glass-armoured multi-fiber loose tube cables u to 24 fibers Secification Jacket Ø mm Number of fibers each bundle 2 to 24 2 to 24 2 to 24 Multi fiber loose tube standard standard standard Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Imact resistance W = 4.41 J imacts IEC E4 W = 4.5 J 100 Reeated bending r = 80 mm cycles IEC E6 r = 120 mm 5000 Torsion ± 1440 cycles 3 3 IEC E7 ± Water enetration h = 1 m, 24 h, < 3 m IEC F5B Thermal roerties Temerature range during installation C 10 to to to +50 IEC F1 in service C 40 to to to +70 in storage C 40 to to to +70 Combustion roerties Fire load MJ/m /65/EC (RoHS) comliant = assed HUBER+SUHNER Fiber Otic Cables 101

102 Glass-armoured multi-fiber loose tube cables TWINTUBE u to 24 fibers Proerties Metal free outdoor cable Rodent-rotected, glass-armoured For use in ducts and unrotected environment Ricord for easy jacket removal High chemical resistance against acids and alkalies Halogen free and non-corrosive fire gases Longitudinal and transversal watertight cable Alications For installations directly in the ground and in mechanically unrotected environments Data cable in distribution networks For installation outdoor, in wet cable ducts and ies Design Cable design Strain relief and rodent rotection Jacket material Jacket colour 2 multi-fiber loose tubes, jelly-filled with u to 2 12 fibers 2 ricords glass-roving PE black According to IEC Ordering information u to /W(ZNG)Y Please see age HUBER+SUHNER Fiber Otic Cables

103 Glass-armoured multi-fiber loose tube cables TWINTUBE u to 24 fibers Secification Jacket Ø mm Number of fibers 2 x 12 2 u to 12 fibers Arox. weight kg/km 69 Mechanical roerties Tensile strength during installation N 3000 IEC E1 in service N 1500 Min. bend radius during installation mm 150 1) IEC E11 in service mm 100 1) Crush resistance short-term N/dm ) IEC E3 long-term N/dm ) Reeated bending r = 150 mm, weight = 5 kg cycles ) IEC E6 Water enetration h = 1 m, 24 h, < 3 m IEC F5B Thermal roerties Temerature range during installation C 10 to +50 IEC F1 in service C 20 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m /65/EC (RoHS) comliant = assed 1) refers to the flat side of the cable HUBER+SUHNER Fiber Otic Cables 103

104 Glass-armoured multi-fiber loose tube cables u to 144 fibers Proerties Metal free outdoor cable Rodent rotection, glass-armoured For use in ducts and unrotected environment Ricord for easy jacket removal High chemical resistance against acids and alkalies Halogen free and non-corrosive fire gases Longitudinal and transversal watertight cable Alications For installation directly in the ground and in mechanically unrotected environments Data cable in distribution networks For installation outdoor, in wet cable ducts and ies Design Cable design 4 to 12 multi-fiber loose tube, jelly-filled with 2 to 12 fibers strength member 2 ricords Strain relief and rodent rotection glass-roving Jacket material PE Jacket colour black with 2 orange stries According to IEC Ordering information /BWSN(ZNG)V /BWSN(ZNG)V /BWSN(ZNG)V /BWSN(ZNG)V /BWSN(ZNG)V Please see age HUBER+SUHNER Fiber Otic Cables

105 Glass-armoured multi-fiber loose tube cables u to 144 fibers Secification Fiber u to 24/ Jacket Ø mm Multi fiber loose tube mini mini mini mini Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Imact resistance W = 2.21 J imacts IEC E4 Water enetration h = 1 m, 24 h, < 3 m IEC F5B Thermal roerties Temerature range during installation C 10 to +50 IEC F1 in service C 40 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m /65/EC (RoHS) comliant = assed HUBER+SUHNER Fiber Otic Cables 105

106 Steel-armoured multi-fiber loose tube cables Simlex and TWINTUBE Simlex u to 24 fibers TWINTUBE u to 24 fibers Proerties Steel-armoured outdoor cable Rodent-rotected (steel-armoured) High chemical resistance against acids and alkalies Halogen free and non-corrosive fire gases Alications For outdoor installations and in mechanically unrotected environments Data cable in distribution networks For installations directly in the ground Design Cable design Strain relief Rodent rotection Jacket material Jacket colour 1 to 2 multi-fiber loose tubes, jelly-filled with 2 to 24 fibers aramid yarn/glass-roving steel-armoured PE black According to IEC Ordering information u to 24- /W(ZN)YAY- 80 u to 24- /W(ZNG)YAY- 125 Please see age HUBER+SUHNER Fiber Otic Cables

107 Steel-armoured multi-fiber loose tube cables Simlex and TWINTUBE Secification Simlex TWINTUBE Jacket Ø mm Numbers of fibers Multi-fiber loose tube standard standard Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm * IEC E11 in service mm * Crush resistance short-term N/dm * IEC E3 long-term N/dm * Imact resistance W = 4.41 J imacts 50 IEC E4 W = 15 J imacts 3 Thermal roerties Temerature range during installation C 10 to to +50 IEC F1 in service C 40 to to +70 in storage C 40 to to +70 Combustion roerties Fire load MJ/m /65/EC (RoHS) comliant = assed * refers to the flat side of the cable HUBER+SUHNER Fiber Otic Cables 107

108 Steel-armoured multi-fiber loose tube cables u to 72 fibers Proerties Steel-armoured outdoor cable Rodent-rotected (steel-armoured) For use in ducts and unrotected environment Halogen free and non-corrosive fire gases Alications For outdoor installations and in mechanically unrotected environments Data cable in distribution networks For installation directly in the ground Design Cable design Strain relief Rodent rotection Jacket material Jacket colour 4 to 6 multi-fiber loose tubes, jelly-filled with 2 to 12 fibers strength member 2 ricords glass-roving steel-armoured PE black According to IEC Ordering information /BWSN(ZNG)VAV /BWSN(ZNG)VAV /BWSW(ZNG)VAV Please see age HUBER+SUHNER Fiber Otic Cables

109 Steel-armoured multi-fiber loose tube cables u to 72 fibers Secification 4 6 Jacket Ø mm Fiber quantity u to 24/48 72 Multi-fiber loose tube mini mini Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Imact resistance W = 2.21 J imacts IEC E4 Thermal roerties Temerature range during installation C 10 to +50 IEC F1 in service C 40 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m /65/EC (RoHS) comliant = assed HUBER+SUHNER Fiber Otic Cables 109

110 Secial cables Cable tye Page Ordering key Weight kg/km Amount of fibers Simlex cables with tight tube /FJZ Rugged simlex cables /FJH(ZN)Z Industry Link TWINFLEX and rugged minicord breakout cables /FJ(ZN)Z /...(ZN)Z Industry Link TWINFIX /...(ZNG)H /...(ZNG)R Industry link QUADFIX /FJSN(ZNG)H H200/VJSN(ZNG)H Mobile field cables /FSN(ZN)Z /FSN(ZN)Z /FSN(ZN)Z /FSN(ZN)Z Glass-armoured riser cables 2 tubes /F(ZNG)H /F(ZNG)H /F(ZNG)H Glass-armoured riser cables 4 tubes /FSN(ZNG)H Rugged multi-fiber loose tube u to 24 fibers (dry) /Q(ZNG)Z u to 24 Steel armoured multi fiber loose tube cable, u to 24 fibers /W(ZN)HAR- 82_DNV 24- /W(ZN)HAH /Q(ZN)HAU u to 24 u to 24 u to 24 DNV GL tye aroved multi fiber loose tube cable steel armoured, u to 24 fibers /W(ZN)HAR-...82_DNV 115 u to HUBER+SUHNER Fiber Otic Cables

111 Amount of conductors Tube Ø mm Simlex cable Ø mm Jacket Ø mm Jacket material Direct connector termination Tensile strength N Crush resistance N/dm Temerature range in service C Fire roagation IEC Fire roagation IEC CPR 2011/305/EU TPU to TPU to TPU TPU to to LSFH RADOX to to +75 Dca-s1a, d0, a LSFH to +70 Cca-s1a, d0, a TPU TPU TPU TPU to to to to LSFH LSFH LSFH to to to +75 Dca-s2, d0, a1 Dca-s1a, d0, a1 Dca-s2a, d1, a LSFH to TPU to RADOX LSFH TPU to to to 85 b b b b b 8.2 RADOX to +85 b b HUBER+SUHNER Fiber Otic Cables 111

112 Secial cables Cable tye Page Ordering key Weight kg/km Amount of fibers DNV GL tye aroved multi fiber loose tube /W(ZNG)H u to 24 Drag chain cables /FSN(ZN)YZ u to 12 RADOX drag chain cable /FSN(ZN)YR u to 12 Hybrid cables /CWJSNH C /CWJSNH C /WSN(ZNG)Y C /WSN(ZNG)Y C... u to 4 u to 8 u to 60 u to 96 = assed 112 HUBER+SUHNER Wireless infrastructure

113 Amount of conductors Tube Ø mm Simlex cable Ø mm Jacket Ø mm Jacket material Direct connector termination Tensile strength N Crush resistance N/dm Temerature range in service C Fire roagation IEC Fire roagation IEC CPR 2011/305/EU 12 LSFH to +70 b TPU to RADOX to +85 u to 3 u to 4 u to 4 u to LSFH LSFH PE PE to to to to +70 HUBER+SUHNER Wireless infrastructure 113

114 Simlex cables with tight tube Proerties Metal free indoor and outdoor cable Strain relieved with aramide yarn For direct connector assembly with strain relief Tight bend radii For high mechanical and thermal stability Halogen free and non-corrosive fire gases Alications For outdoor and indoor installations Patch cable in distribution centres Design Tube tight tube 0.9 mm Strain relief aramide yarn Jacket material TPU Jacket colour E9 yellow G50 OM2 orange G50 OM3 turquoise G50 OM4 heather violet G62.5 OM1 orange According to IEC Ordering information /FJZ Please see age HUBER+SUHNER Fiber Otic Cables

115 Simlex cables with tight tube Secification Jacket Ø mm 1.9 Tube Ø mm 0.9 Arox. weight kg/km 3 Mechanical roerties Tensile strength during installation N 180 IEC E1 in service N 90 Min. bend radius 1) during installation mm 50 IEC E11 in service mm 25 Crush resistance short-term N/dm IEC E3 long-term N/dm 2000 Imact resistance W = 0.74 J imacts 30 IEC E4 Reeated bending r = 30 mm, weight = 1 kg cycles 2500 IEC E6 Thermal roerties Temerature range during installation C 10 to +50 IEC F12 in service C 40 to +85 in storage C 40 to +85 Combustion roerties Fire load MJ/m /65/EC (RoHS) comliant 1) Smaller bending radius are ossible with E9/125 LowBend (ITU G.657) and G50/125-OM3/OM4 BendOtimized. HUBER+SUHNER Fiber Otic Cables 115

116 Rugged simlex cables Proerties Metal free indoor and outdoor cable Strain relieved with aramide yarn For direct connector assembly with strain relief High chemical resistance against acids and alkalies For high mechanical and thermal stability Halogen free and non-corrosive fire gases Imroved crash resistance Alications Industry LAN Mobile data cablings in harsh environment Machinery cablings, drag chains Design Cable design 1 single fiber cable with tight tubes Strain relief aramide yarn Jacket material TPU/black Jacket colour E9 yellow G50 OM2 orange G62.5 OM1 orange According to IEC Ordering information /FJH(ZN)Z Please see age HUBER+SUHNER Fiber Otic Cables

117 Rugged simlex cables Secification Jacket Ø mm 6.0 Single fiber cable Ø mm 2.7 Tube Ø mm 0.9 Arox. weight kg/km 40 Mechanical roerties Tensile strength during installation N 4000 IEC E1 in service N 1500 Min. bend radius during installation mm 90 IEC E11 in service mm 60 Crush resistance short-term N/dm IEC E3 long-term N/dm Imact resistance W = 2.25J imacts 150 IEC E4 Reeated bending r = 30 mm, weight = 2.5 kg cycles IEC E6 Flexing r = 77 mm velocity = 2.2 m/s L = 2 m cycles HUBER+SUHNER drag chain test Thermal roerties Temerature range during installation C 10 to +60 IEC F1 in service C 25 to +70 in storage C 40 to +70 Combustion roerties Fire load MJ/m 0.57 Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant = assed HUBER+SUHNER Fiber Otic Cables 117

118 Industry Link TWINFLEX and rugged minicord breakout cables Rugged minicord breakout Industry Link TWINFLEX Proerties Metal free indoor and outdoor cable For direct connector assembly with strain relief Strain relieved with aramide yarn Ricord for easy jacket removal Halogen free and non-corrosive fire gases Imroved crush resistance For high thermal and mechanical stability High chemical resistance against acids and alkalies High abrasive resistance Alications For flexible, moved and fixed use Industrial Ethernet and LAN Machine cabling, drag chains As control or data cable in factory automation Mobile data cabling for harsh environment Connection to outdoor devices Design Cable design Strain relief Jacket material Jacket colour 2 single fiber cables with tight tubes 1 ricord aramide yarn TPU black According to IEC Ordering information Rugged minicord breakout TWINFLEX /FJ(ZN)Z /...(ZN)Z Please see age 166. Conformance TWINFLEX cables with H200 and POF meet PROFINET secification. 118 HUBER+SUHNER Fiber Otic Cables

119 Industry Link TWINFLEX and rugged minicord breakout cables Secification Cable tye rugged minicord breakout Fiber tyes E9, G50, G62 H200 G50, G62 Industry Link TWINFLEX H200 POF980 Jacket Ø mm Single fiber cable Ø mm Tube Ø mm Channel marking on single fiber numbered black and orange with arrows Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Imact resistance W = 1.5 J imacts IEC E4 W = 2.2 J Reeated bending r = 30 mm/10 kg cycles IEC E6 r = 60 mm/1 kg Flexing r = 77 mm cycles HUBER+SUHNER 1) Flexing r = 70 mm IEC E8 r = 80 mm IEC E8 Torsion ± 360 cycles IEC E7 ± Thermal roerties Temerature range during installation C 20 to to to +70 IEC F1 in service C 40 to to to +70 in storage C 40 to to to +70 Combustion roerties Fire load MJ/m /65/EC (RoHS) comliant Conformance PROFINET Secification 2) yes yes 1) Drag chain test 2) Standard with H+S marking. According to PROFINET secification with PROFINET marking (PROFINET Tye C 2K200/230 or PROFINET Tye C 2P980/1000) HUBER+SUHNER Fiber Otic Cables 119

120 Industry Link TWINFIX glass-armoured breakout cables Proerties Metal free indoor and outdoor cable For direct connector assembly with strain relief Rodent-rotected, glass-armoured Easy striing Low smoke, halogen free and self-extinguishing Imroved crush resistance For high thermal and mechanical stability UV rotected, suitable for outdoor use Longitudinal and transversal watertight cable Alications For fixed installation Industrial Ethernet and LAN Machine cabling As control or data cable in factory automation Data cabling for harsh environment Connection to outdoor devices LSFH for alications involving high safety requirements in case of fire Design Cable design 2 single fiber cables with tight tubes Strain relief glass-armoured Jacket materiallsfh Jacket colour black According to IEC Ordering information /...(ZNG)H /...(ZNG)H-...22_UN (otional) Please see age 167. Arovals UL listed acc. OFN/OFNG 120 HUBER+SUHNER Fiber Otic Cables

121 Industry Link TWINFIX glass-armoured breakout cables Secification Cable tye Industry Link TWINFIX Fiber tyes E9. G50, G62 H200 POF980 Jacket Ø mm Single fiber cable Ø mm Tube Ø mm Channel marking on single fiber black and orange with arrows Arox. weight kg/km Mechanical roerties Tensile strength during installation N IEC E1 in service N Min. bend radius during installation mm IEC E11 in service mm Crush resistance short-term N/dm IEC E3 long-term N/dm Imact resistance W = 2.2 J imacts IEC E4 Reeated bending r = 60 mm/1 kg cycles IEC E6 Torsion ± 360 cycles IEC E7 Water enetration h = 1 m, 24 d, < 3 m IEC F5A Thermal roerties Temerature range during installation C 10 to to to +60 IEC F1 in service C 40 to to to +70 in storage C 45 to to to +70 Combustion roerties Fire load MJ/m Fire roagation on a vertical cable bundle IEC Fire test with circuit integrity (CI) min 90 IEC Halogen acid gas jacket material IEC Degree of acidity jacket material IEC /65/EC (RoHS) comliant Conformance PROFINET secification 1) yes yes (EU) No 305/2011 (CPR) Dca-s1a, d0, a1 EN = assed 1) Standard black jacket and with H+S marking. According to PROFINET secification with green jacket and PROFINET marking (PROFINET Tye B 2K200/230 or PROFINET Tye B 2P980/1000) HUBER+SUHNER Fiber Otic Cables 121

122 Industry Link RADOX TWINFIX glass-armoured breakout cables Proerties Metal free indoor and outdoor cable For direct connector assembly with strain relief Rodent-rotected, glass-armoured Easy striing Low smoke, halogen free and self-extinguishing Imroved crush resistance For high thermal and mechanical stability UV-rotected, suitable for outdoor use Longitudinal and transversal watertight cable Alications For fixed installation Industrial Ethernet and LAN Machine cabling As control or data cable in industrial lants Cabling in harsh environment conditions Connection to outdoor devices Design Cable design 2 single fiber cables with tight tubes Strain relief glass-armoured Jacket materialradox Jacket colour black According to IEC Ordering information /...(ZNG)R See age HUBER+SUHNER Wireless infrastructure