ezspan ADSS Short Span All-Dielectric Self-Support Loose Tube Cable
|
|
|
- Rolf Jenkins
- 5 years ago
- Views:
Transcription
1 ezspan ADSS Short Span All-Dielectric Self-Support Loose Tube Cable Water Blocking Binders... Ripcord Optical Fibers Flexible Buffer Tube Jacket (polyethylene) (3.0 mm) Aramid Strength Yarns Draka Optical Cable Water Blocking Binders... Jacket (polyethylene) Ripcord Ripcord Optical Fibers Flexible Buffer Tube (3.0 mm)... Aramid Strength Yarns... Jacket (polyethylene) Draka Optical Cable Product Snapshot Applications Self-Supporting Aerial Deployment for Communications & Transmission Space Constructions All-Dielectric Round - Typical Span Lengths up to 1,200 (305m), Single & Dual Jacket Fiber Count 2 to 144 fibers in color coded buffer tubes Fiber Types Single-mode (ESMF, BendBright, BendBright-XS, NZDSF-LA, Teralight ) / Multimode / Hybrid Options Single or Dual Jackets / Matching Pole Attachment Hardware Standards IEEE 1222, ANSI / ICEA 640, IEC, RUS 7 CFR 1755 (RUS LISTED), Telecordia GR-20 All-Dielectric Self-Support (ADSS) easy entry fiber cable for up to 1200 (365m) spans typical in distribution. Draka s ezspan ADSS Short Span version provides reliable self-support performance for up to 1200 feet (305 meters). Each ezspan ADSS cable is custom engineered for each application based on its full weather load, ensuring safe, reliable lifetime performance. Flexible buffer tubes enable ease of mid-entry, preparation and routing in splice closures. These cables uniquely combine flexible buffer tubes, swellable water-blocking, and exclusive ColorLock fiber coating to make ezspan the easiest ADSS cables to access and prep. Features & Benefits Content may be subject to change without notification RUS Listed Easy Cable Entry & Preparation 12 fibers per tube construction up to 144 fiber designs allow easy termination and mid-span fiber access Flexible buffer tubes and single jacket option enhance mid-entry Ripcord speeds cable entry & outer jacket removal Swellable binders speed cable preparation Flexible Routing & Termination Flexible buffer tubes simplify routing, storage & prep Available in BendBright & BendBright-XS bend-tolerant single-mode fiber (Continued on next page)
2 Features & Benefits (cont.) Versatile Installation & Use Tailored designs span distances up to 1200 (305m) without interrupting power Easy mid-entry ideal for FTTx distribution applications Matching pole attachment hardware (dead-ends, suspension clamps) Reliable Lifetime Performance Exclusive ColorLock fiber coating (single-mode) for permanent embedded color & long-term performance Custom engineered for operation under full load Guaranteed standards-based performance Minimum Bend Radius with load: 20x cable diameter no load: 10x cable diameter Temperature Range Shipping and Storage -40 o F to +167 o F (-40 o C to +75 o C) Installation -22 o F to +140 o F (-30 o C to +60 o C) Operation -40 o F to +158 o F (-40 o C to +70 o C) PLP Attachment Hardware - Dead ends indicated are limited and medium tension designed for a maximum long-term tension of 1000 lbs and short-term tension of 2500 lbs for limited tension and 2000 and 4000 lbs. for medium tension. Limited tension dead ends are limited to a maximum span length of 600 feet. - C1E1 designates thimble clevis and extension link (recommended). - Aluminum Suspension is designed for in-line support with a maximum angle change of 20 and a maximum span of 600 feet. Span of > 600 to 1200 feet require reinforcing rods (SSR). - The "S" designates anchor shackle and eye-nut (recommended). - Aluminum Support is designed for in-line support with a maximum angle change of 20 and a maximum span of 600 feet.
3 NESC Light Loading ezspan Single Jacket 6-30 Fiber (6 fiber tube) F-ADES ES-XXX C1E S up to F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S up to F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S up to F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S
4 NESC Medium Loading ezspan Single Jacket 6-30 Fiber (6 fiber tube) F-ADES ES-XXX TE S up to F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S up to F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S up to F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S
5 NESC Heavy Loading ezspan Single Jacket 6-30 Fiber (6 fiber tube) F-ADES ES-XXX TE S up to F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S up to F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S up to F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S F-ADES ES-XXX C1E S S
6 NESC Light Loading ezspan Double Jacket up to F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S up to F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S up to F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S
7 NESC Medium Loading ezspan Double Jacket up to F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S up to F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S up to F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S
8 NESC Heavy Loading ezspan Double Jacket up to F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S up to F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S up to F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S F-ADED ES-XXX C1E S S
9 Ordering Check List For Ordering or More Information Contact Us at or Installation Location: City State 2 Cable Length: (ft or m) 3 # of Jackets: Single Jacket Dual Jacket 4 Number of Fibers: 5 Fiber Type & Grade: 6 Max. Span Length: (ft or m) 7 Installation Sag: 1.5% Other (Please Specify) 8 NESC Loading Condition: Light Medium Heavy Other (Define Ice & Wind Load) 9 Line Voltage: None Distribution Line Transmission Line Phase to Phase (kv) Phase to Ground Ordering Guide A Specific cable part number will be provided at time of quotation to meet the specified application requirements. Please contact your Draka cable customer care representative for other maximum span distances. Cable Reference LENGTH MARKINGS PRODUCT FAMILY CONSTRUCTION LOAD RATING FIBER GROUPING FIBER TYPE FIBER COUNT X ADE S XXXX 12 XX XXX FIBER GRADE Span Short Span S=single jacket Maximum Rated 12=12 fibers per tube See Table fibers See Table 2 F = Feet ADSS D=double jacket Cable Load (lbs.) M = Meters XX Table 2 - Fiber Information Fiber Description Fiber Wavelength (nm) Attenuation Bandwidth 1 GbE 10 GbE 6 8 Type Grade (db/km) (MHz km) Distance Distance (meters) (meters) Singlemode ES Enhanced Single-Mode E1 1310/1383/ /0.4/0.3 (ITU G.652.C & D) E3 1310/1383/ /0.35/0.25 BB BendBright E3 1310/1383/ /0.35/0.25 (ITU G.657.A1 & G.652) BX BendBright-XS E3 1310/1383/ /0.35/0.25 (ITU G.657.B2 & A2 & G.652.D) TU TeraLight Ultra NA 1310/ /0.25 LA NZDSF-LA N Multimode 6S OM1 (62.5μm) M2 850/ / / /550 33/ _ 5E MaxCap-BB-OM2+ (50μm) M3 850/ / / / / _ 5F MaxCap-BB-OM3 (50μm) M3 850/ / / / / _ 5G MaxCap-BB-OM4 (50μm) M3 850/ / / / / _ Other cable constructions and fiber performance grades available on request.
ezspan ADSS All-dielectric self-supporting loose tube cable
All-dielectric self-supporting loose tube cable MANUFACTURED IN Aramid Strength Yarns Inner Jacket Polyethylene (optional) Central Strength Member Water Blocking Material Gel-Filled Buffer Tube Containing
Long Span ADSS All-dielectric self-supporting loose tube cable
Long ADSS l-dielectric self-supporting loose tube cable MANUFACTURED IN HDPE Outer Jacket Aramid Strength Yarns Inner Jacket Polyethylene (optional) Central Strength Member Water Blocking Tube Gel-Filled
ezprep Gel-Free Loose Tube Gel-Free Loose Tube Cable (2.5mm)
...... ezprep Gel-Free Loose Tube Gel-Free Loose Tube Cable (2.5mm) Optical Fibers Water Blocking Binders... Ripcord Jacket (polyethylene) Draka Optical Cable... Central Strength Member Flexible Buffer
ExpressLT Dry Dry Loose Tube Cable (2.5 mm)
MANUFACTURED IN A versatile, multi-purpose fiber cable designed for ease of use and Buffer Tube Mid-Span Storage applications Overview Prysmian s popular ExpressLT cable combines buffer tubes with enhanced
OPGW and ADSS Fiber Cable. For Overhead Transmission Lines
OPGW and ADSS Fiber Cable For Overhead Transmission Lines PRYSMIAN GROUP VISION, MISSION, VALUES Vision The Prysmian Group believes in the effective, efficient and sustainable supply of Energy and Information
Mini-Span ADSS Cable
AFL Mini-Span All-Dielectric Self-Supporting (ADSS) cable is designed for outside plant aerial and duct applications in local and campus network loop architectures. From poleto-build to town-town installations,
fiber optic cable Outdoor Cables
fiber optic cable Outdoor Outdoor Cables CST Armored cables for direct-buried applications Product specifications Outdoor Cables OC 1 CST & FRP Armor Applications Ideal for installation where direct-burial
Construction 2-24 tightly buffered fibres 900 m 50 m. colour code 1 Red 13 Yellow w/mark every 70 mm 2 Green 14 White w/mark every 70 mm 3 Blue 15 Gre
Universal indoor/outdoor distribution or mini breakout cable with ES9 tight buffer, 2 24 fibres and black FireBur sheath, VDE: U-V(ZN)H Application and Installation This distribution or mini-break-out
Mining and Petrochemical Tray-Rated Fiber Optic Cables
Features and Benefits Loose tube construction Stable and highly reliable transmission parameters Waterblocking technology Allows efficient and craft-friendly cable preparation Extra tough double jackets
Construction 2-24 tightly buffered fibres 900 m 50 m. colour code 1 Red 13 Yellow w/mark every 70 mm 2 Green 14 White w/mark every 70 mm 3 Blue 15 Gre
Universal indoor/outdoor distribution or mini breakout cable with ES9 tight buffer, 2 24 fibres and black FireBur sheath, VDE: U-V(ZN)H Application and Installation This distribution or mini-break-out
Basic design adapted to Telcordia GR409-CORE / TIA/EIA 568B.3 / ICEA-S
ADDISON Flame Retardant Tight Buffered Distribution Optic cables MTA-B-C-D-Y Tight Buffer Coating Glass Yarn Ripcord(optional) PVC Outer Sheath APPLICATION This cables are used for interconnection of distribution
Datasheet Outside Plant Cable
Outside Plant Cable Direct Buried Cable Direct buried cable can be buried directly into the ground in a trench or using a vibratory plow. Except for with great water-blocking and moisture-proof performance,
Construction 2-24 tightly buffered fibres 900 m 50 m. colour code 1 Red 13 Yellow w/mark every 70 mm 2 Green 14 White w/mark every 70 mm 3 Blue 15 Gre
Universal indoor/outdoor distribution or mini breakout cable with ES9 tight buffer, 2 24 fibres and black FireBur sheath, VDE: U-V(ZN)H Application and Installation This distribution or mini-break-out
Caledonian Fire Resistant Optic Fiber Cables
Fire Resistant Optic Cables Fire resistant Central Loose Optic cables Application These cables are characterized by light weight and small diameter, suitable for both aerial and duct installation. They
Outside Plant All Dielectric
Berk-Tek s Outside Plant Loose Tube ber optic cables are designed for installation in harsh enviroments such as direct burial, aerial lashing, conduit and pathways that are subjected to wide temperature
Fiber Optic, Breakout cable, tight buffered, 900 microns
Fiber Optic, Breakout cable, tight buffered, 900 microns Features and benefits Fiber-count 2-144 fibers 900 microns buffered design for easy termination Tight buffered construction Plenum (OFNP / FT6),
OSP Fiber Optic Cable
OSP Fiber Optic Cable Installation and Handling Guidelines for Underground and Aerial Applications Howard Kemp Member of Technical Staff OFS Customer Support Engineering Outline Cable & Fiber Description
Volition. Fiber Optic Cable. 3Innovation
Volition Fiber Optic Cable Tough enough to take it. Easy to handle. Tough enough to take it. Easy to handle. The Volition Network Solution from 3M includes horizontal and backbone cable with 62.5/125 µm
MIC Plenum Cables, 2-24 Fibers
Features and Benefits 900 µm Buffered Fibers Easy, consistent stripping All-dielectric cable construction Requires no grounding or bonding Flame-retardant jacket Rugged and durable Standards Listings National
ENTERPRISE FIBER OPTIC CABLE. Interconnect Indoor Indoor/Outdoor Outdoor ADSS MicroCore
ENTERPRISE FIBER OPTIC CABLE Interconnect Indoor Indoor/Outdoor Outdoor ADSS MicroCore Founded in 1984, AFL is a global leader providing fiber optic products, equipment, and engineering services to the
MIC Unitized Plenum Cables, Fibers
MIC Unitized Plenum Cables, 36-144 s Features and Benefits Six- or 12-fiber jacketed subunits Quick and easy identification 900 µm TBII Buffered s Easy, consistent stripping All-dielectric cable construction
Indoor/Outdoor Cables Single-Armored, Plenum, Tight Buffered Distribution Indoor/Outdoor Cable
Indoor/Outdoor Cables Single-Armored, Plenum, Tight Buffered Distribution Indoor/Outdoor Cable Single-Armored Tight Buffered Tight buffered fibers are positioned in a flexible metal tube, which is filled
Interconnect Cable Simplex and Duplex
10.3 Interconnect Cable Simplex and Duplex Tight Buffer & Plenum Rated Patch panels Workstation equipment connections Horizontal distribution in open office environments Interconnect Cables are designed
Application Specification. Optical Fiber. Aramid Yarns. 2mm Subunit Jacket. Strength Rods. Outer Jacket
Application Specification 402-1012 February 28, 2017 Rev B Fiber Optic Breakout Cables Optical Fiber Aramid Yarns 2mm Subunit Jacket Strength Rods 2 Fiber Cable Outer Jacket 12 Fiber Cable Description:
P R O D U C T C AT A L O G T ALOG
2 0 0 2 2002 PRODUCT CATALOG Need More Information? Visit our Web site at Instruction Sheets Cut Sheets White Papers Data Sheets Product/Part Number Searches AMP NETCONNECT Sales Engineer Contacts Authorized
ENTERPRISE FIBER OPTIC CABLE. Interconnect Indoor Indoor/Outdoor Outdoor ADSS MicroCore
ENTERPRISE FIBER OPTIC CABLE Interconnect Indoor Indoor/Outdoor Outdoor ADSS MicroCore Founded in 1984, AFL is a global leader providing fiber optic products, equipment, and engineering services to the
O P T I C A L F I B R E C A B L E S CONTRIBUTING TO DIGITAL INDIA
O P T I C A L F I B R E C A B L E S CONTRIBUTING TO DIGITAL INDIA CONTENTS Single Tube Unarmoured Cable Multi - Tube Single Sheath Unarmoured Cable 2 Multi - Tube Ribbon Type Unarmoured Cable 3 Single
S Ingle Mode Fiber Patch Cord and Pigtail (SC/APC, LC/APC)
S Ingle Mode Fiber Patch Cord and Pigtail (SC/APC, LC/APC) 1. General : 1.1 This specification covers the requirements of the standard patch cord and pigtail to be supplied to TOT Public Company Limited
Optical Fibre Fibre Cables
Optical Fibre Fibre Cables Table of content Nexans 3 Nexans UK 4 Symbols 5 Fibre Cables 6 Optical cable speci cations 7 LANmark-OF Tight Buffer Indoor 10 LANmark-OF Tight Buffer Universal 13 LANmark-OF
Micro Fibre Indoor Cable Multi-core (Up to 96 Fibres) Applications. Features
Micro Fibre Indoor Cable Multi-core (Up to 96 Fibres) 2 to 96 Micro fibre indoor cable, 12 fibre stranded sub units, 250µm coloured fibre around an fibre reinforced plastic (FRP) central non-metallic strength
Introduction to Fiber Cable Assemblies FiberDeep and Cable Assemblies
Introduction to Fiber Cable Assemblies FiberDeep and Cable Assemblies Combining 40+ years of experience from its founding members, Clearfield designs and manufactures fiber optic cable assemblies for virtually
Section 6 FIBERLIGN Hardware for ADSS
FIBERLIGN Hardware for ADSS: Section 6 Section 6 FIBERLIGN Hardware for ADSS Table of Contents Page Fiber Optic Product Layout for ADSS...6-2 FIBERLIGN Lite Tension Dead-end for ADSS...6-3 FIBERLIGN Dielectric
2001 PRODUCT CA T ALOG
2001 PRODUCT CATALOG 2001 Need More Information? Visit our Web site at Instruction Sheets Cut Sheets White Papers Data Sheets Product/Part Number Searches AMP NETCONNECT Sales Engineer Contacts Authorized
Plug & Play AnyLAN Systems
features and benefits Factory-terminated cables Watertight components with compact, rugged design Multi-fiber quick connect Factory tested Modular SPECIFICATION SHEET LAN-731-EN PAGE 1 Install with no
Volition Fiber Optic Cable
Volition Fiber Optic Cable The Volition Network Solution from 3M includes horizontal and backbone cable with 62.5/125 µm and 50/125 µm multimode fiber, and 9/125 µm single-mode fiber. The horizontal cable
DNV-GL HH CE RoHS-II conform
Armour: Extremely bending- and torsion-stable aramid braid Armour: Extremely bending- and torsion-stable aramid wrapping Outer jacket: Pressure extruded PUR mixture Fibre: FOC-fibre made out of glass Subcable
Mini Breakout Distribution Cable Multi-core ( Fibres)
Mini Breakout Distribution Cable Multi-core (12-144 Fibres) 12 to 144 fibre mini breakout multi-core distribution cable, consists of 4 to 8 individually coloured, 12 fibre stranded sub units around an
Annexure B (1)- Engineering Instructions for Installation of Aerial OFC
Annexure B (1)- Engineering Instructions for Installation of Aerial OFC INSTALLATION PRACTICE OF SELF SUPPORTING METAL FREE AERIAL OPTICAL FIBER CABLE 1. SCOPE: This Engineering Instruction (EI) deals
Instructions for Wire Mesh Pulling Grips on Outside Plant and Indoor/Outdoor Fiber Optic Cable Best Practices
Instructions for Wire Mesh Pulling Grips on Outside Plant and Indoor/Outdoor Fiber Optic Cable Best Practices Panduit Corp. 2007 BEST PRACTICES Table of Contents 1.0 General Information... 3 2.0 Preparation
OPTICAL GROUND WIRE & A CCESSORIES. Traditional High Fiber Count Hardware & Accessories
OPTICAL GROUND WIRE & A CCESSORIES Traditional High Fiber Count Hardware & Accessories AFL Optical Ground Wire has set the standard through product innovation and engineering excellence, which is reinforced
Chengdu Qianhong Communication Co., Ltd. Fiber Optic Splice Closure. GJS03-M8AX-JX-144D-Mechnical Sealing Way.
Fiber Optic Splice Closure GJS03-M8AX-JX-144D-Mechnical Sealing Way Specification GJS03-M8AX Catalogue General Introduction GJS03-M8AX-JX-144D dome Fiber Optic Splice Closure (FOSC) are mechanical sealing
USB3.0 for Active Optical Cable
USB3.0 for Active Optical Cable 1. Description 1. Basics: USB3.0 Active Optical Cable (AOC) speed up to 5 Gbps 2. Dimension of USB3.0 Type A male plug conforming requirements (Size: 56.1 x 8 x 16 mm).
Fiber Solutions for Access and Transport Networks
PRODUCT CATALOGUE Fiber Solutions for Access and Transport Networks Rev. 2017-A HEXATRONIC.COM 1 B D A C A Long Term Investment The passive infrastructure in any fiber optic network is a long-term investment.
Avionics Optical Cables
Your Optical Fiber Solutions Partner Avionics Optical Cables for Commercial and Defense Aircraft FlightLink Cables FlightGuide Cables Avioptics Cable www.specialtyphotonics.com OFS Your Optical Fiber Solutions
MTP Loose Tube Trunk Assemblies. Features. Applications.
Loose Tube Trunk Assemblies Up to 144 fibre loose tube optical cable assemblies designed and manufactured for high density applications that require interface. They are available in singlemode (G.652.D,
Laser Optimized Multimode
Solution Laser Optimized Multimode 1 Fiber optic LIU/489 FIU 2 Racks and cabinets 3 Equipment room: -600 G2 modular shelf and panel shelf -1000 G2 modular shelf and panel shelf 4 Telecom closet: -600 G2
3000SC Fiber Optic Splice Closure
3000SC Fiber Optic Splice Closure Protect All Of Your Fiber Optic Splices From Harsh Outside Plant Environments Product Description Our 3000SC Fiber Optic Splice Closure is a sealed, reinforced thermoplastic
50µm µlinx Avionics Cable
Summary of Results Supplemental Information for Qualified OFS Customer Use 50µm µlinx Avionics Cable p/n C26490 µlinx Optical Fiber Cable is a new reduced diameter product with an outer diameter of 0.8mm,
FTTH simplex indoor cables with semi-tight tube
FTTH simplex indoor cables with semi-tight tube Design Cable design Strain relief Jacket material Jacket colour 1 semi-tight tube Aramide yarn LSFH white Properties Metal free indoor cable Strain relief
Features: Use the selection chart below to choose the Splice Case and splice tray organizer which meet the requirements for your application.
FIBERLIGN Organizers For s (Protected and ) and Mechanical s FIBERLIGN Fiber Optic Organizers are designed to help organize, secure, support and protect delicate optical fibers before, during and after
Table of Contents. Optical Ground Wire Hardware. Tools. Assemblies. ADSS Mini-Span Hardware. ADSS Hardware. Installation Instructions
Table of Contents Optical Ground Wire Hardware Bolted Dead End..................................... 3 Dead End Link Plate.... 6 Comealong......................................... 7 HIBUS OPGW Suspension...
Proposed Short circuit test: The attenuation coefficient to max allowed increased 0.05 db/km from the point of strike.
Proposed Short circuit test: The attenuation coefficient to max allowed increased 0.05 db/km from the point of strike. Test 1 2 3 Short-circuit current 6kA 9kA 20kA Duration 1.0Sec 0.5Sec 0.1Sec 46 Proposed
USB3.0 For Active Optical Cable SPECIFICATIONS
USB3.0 For Active Optical Cable SPECIFICATIONS MODEL Comoss PART NUMBER Custom PART NUMBER PRELIMINARY Ver.. 1.0 OFFICIAL Release Date: 2015-01-26 CUSTOMER BY PREPARED BY APPROVAL CHECK BY DESIGN BY Victor
Section 3 FIBERLIGN Closure Series
FIBERLIGN Closure Series: Section 3 Section 3 FIBERLIGN Closure Series Table of Contents Page FIBERLIGN s...3-2 FIBERLIGN Organizers...3-3 FIBERLIGN UNI-CLOSURE...3-8 FIBERLIGN Fiber Safe...3-11 FIBERLIGN
MPO MicroCable Trunk Assembly
Product updated on June 04, 2018 Trunk Assembly Trunks facilitate rapid deployment of high density backbone cabling in data centers or other high fiber density environments reducing network installation
STFOC Optical Cable. Non-Kink Crush Proof
STFOC Optical Cable Non-Kink Crush Proof Linden Photonics, Inc. Optical packaging S T F O C Linden s fiber optic cables are available for a variety of underwater uses from munitions tethers to ROV controls
USB3.0 For Active Optical Cable SPECIFICATIONS
USB3.0 For Active Optical Cable SPECIFICATIONS PLUG, STD A USB 3.0 PLUG, STD A USB 3.0 MODEL COMOSS PART NUMBER USB3AOC-A/1-A/1-(X)M-XXX USB3AOC-A/1-AF/1-(X)M-XXX Custom PART NUMBER X PRELIMINARY Ver:
Opti-Guard Splice Enclosure
Opti-Guard Splice Enclosure The Opti-Guard Splice Enclosure from AFL offers an impressive spectrum of features which makes it the best selection for your splice protection needs. Its unique and flexible
Mini-OTE 400. Mini-OTE 400. Content 1 General 1.1 General product information 1.2 Cable types 1.3 Symbols in this guide.
Mini-OTE 400 INSTALLATION INSTRUCTION TC-1335-IP Rev C, March 2017 www.commscope.com Mini-OTE 400 Content 1 General 1.1 General product information 1.2 Cable types 1.3 Symbols in this guide 2 Tools Required
THE SB01 SPLICE ENCLOSURE NOW INCLUDES A LID GASKET THAT DOES NOT REQUIRE RTV APPLICATION.
THE SB01 SPLICE ENCLOSURE NOW INCLUDES A LID GASKET THAT DOES NOT REQUIRE RTV APPLICATION. DO NOT APPLY RTV TO THE GASKET WHEN SEALING THE SB01 SPLICE ENCLOSURE. SEE SECTION 10 FOR UPDATED INSTRUCTIONS.
Industrial Optical Cables
Your Optical Fiber Solutions Partner HCS and GiHCS Industrial Optical Cables now including a full line of greener Low Smoke Zero Halogen options SUBWAY TRAIN TUNNEL FACTORY CONTROL SYSTEMS Indoor Industrial
OFFSHORE WIND FEASIBILITY STUDY APPENDICES Appendix C.2 Subsea Cable Data Sheets
OFFSHORE WIND FEASIBILITY STUDY APPENDICES 10-7 10.3.2 Appendix C.2 Subsea Cable Data Sheets Design data for TFVA 36 kv 3x1x240 mm 2 KQ Metallic Laying up Inner sheath Bedding Armor Diameter of conductor
Splice Trays. features and benefits. specifications. A LANscape. Solutions Product. Splice Capacity
features and benefits Metal trays powder coated Clear plastic covers Fiber loop retention Positive holding action specifications SPECIFICATION SHEET LAN-331-EN PAGE 1 Ruggedness and durability Fiber visibility
LightLink Fiber Optic Splice Trays
LightLink Fiber Optic Splice Trays AFL s LightLink series of Fiber Optic Splice Trays offers a variety of unique and flexible splice and storage possibilities. They are available in industry standard config
SUSPENSION 04 CLAMPS
SUSPENSION CLAMPS 04 4 SUSPENSION CLAMPS 57 Contents General... 58 Suspension clamp trunnion type, forged,... 63 Suspension clamp trunnion type, forged, with bigger angle of deflection, for aluminium based
The reinforcing rods are incorporated in this assembly to ensure the optical fibres within the OPGW Range
OPGW Suspension Assemblies Optical Fibre Cable Same lay as OPGW outer stranding H Reinforcing rods opposite lay to OPGW outer stranding S L Application Heliformed suspension assemblies designed for use
FIBERLIGN Suspension for OPGW
IERLIN Suspension for OPW NOMENCLTURE 1. olt 6. Housing 2. Lock washer 7. Strap 3. Lock nut 8. Structural Reinforcing Rods 4. Outer Rods 9. Current Transfer Tab 5. Insert (for OPW only) iberlign Suspension
COYOTE LCC (Low Count Closure)
PLP Feature Focus 2009 Preformed Line Products OCTOBER 2012 Film available at www.preformed.com COYOTE LCC (Low Count Closure) Be sure to read and completely understand this procedure before applying product.
UNSHIELDED MULTI CONDUCTOR
PLTC 300 VOLT PVC Insulation 105 C, 300 Volts UNSHIELDED MULTI CONDUCTOR For use as instrumentation cable inside or outside in control applications. Suitable for installation in trays, troughs, channels,
Polymer Insulators A Better Solution
Polymer Insulators A Better Solution October 2016 LET S CONNECT POLYMER INSULATORS Design derived from PLP s many years of worldwide experience and tested to adhere to ANSI C29.5 and ANSI 29.6 insulator
COYOTE 28" GLC (Ground Level Closure) Complete Assembly Installation
NOVEMBER 2016 COYOTE 28" GLC (Ground Level Closure) Complete Assembly Installation Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED
MATERIAL FOR FIBRE OPTIC LINES. General C-bracket HSU trunnion type, forged, for aluminium based OPGW conductors...
153 Contents General.................................................................................................. 154 C-bracket.................................................................................................
INDEX PRODUCT RANGE TRATOSFLEX- NSHTÖU-JZ TRATOSFLEX- NSHTÖU-JZK TRATOSFLEX - NSHTÖU-J TRATOSFLEX- NSHTÖU-JK TRATOSFLEX-OCS NEW TRATOSFLEX-ES *
october 2004 TRATOSFLEX 2 Selection of type of cable in relation to use Recommended Bending Radius INDEX Current carrying capacities for continuos operation Current carrying capacities for intermittent
COYOTE 9.5" x 19" (292 mm x 509 mm) Cross-Connect Dome Closure
AUGUST 2013 COYOTE 9.5" x 19" (292 mm x 509 mm) Cross-Connect Dome Closure Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED TM product
FiberExpress Distribution Cables Tight Buffer Indoor Riser & Plenum Rated
Express Distribution Cables Tight Buffer Indoor Riser & Plenum Rated Fast installation, easy termination. Sub-unitized cables provide easy routing and tight-buffered fiber supporter fast and robust field-termination.
Fiber Cables & Hardware
Fiber Cables & Hardware Quiktron has been the premier manufacturer of high performance fiber optic cables since 1994. Whether you are looking for standard or custom fiber cables, Quiktron can provide the
MARCH COYOTE 9.5 x 19 (292 mm x 509 mm) Terminal Dome Closure Kits
MARCH 2012 COYOTE 9.5 x 19 (292 mm x 509 mm) Terminal Dome Closure Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before
Section 5 Fiber Optics: FIBERLIGN Hardware for OPGW
FIBERLIGN Hardware for OPGW: Section Section Fiber Optics: FIBERLIGN Hardware for OPGW Table of Contents Page Fiber Optic Product Layout for OPGW...-2 FIBERLIGN ead-end for OPGW...-3 FIBERLIGN Formed Wire
Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
5 NOVEMBER 2010 COYOTE Dome 9.5 x 28 Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application. 1. 7. 2. 4. 10.
Company Profile. ZTT Cable was established in 1992, and now becomes a public high-tech enterprise with 33 subsidiaries, and about 7,000 employees.
Company Profile ZTT Cable was established in 1992, and now becomes a public high-tech enterprise with 33 subsidiaries, and about 7,000 employees. We provide products such as electrical fittings, optical
SPECIALTY AND HARSH ENVIRONMENT FIBER OPTIC CABLE. Downhole Subsea Transit Mining Military
SPECIALTY AND HARSH ENVIRONMENT FIBER OPTIC CABLE Downhole Subsea Transit Mining Military Founded in 1984, AFL is an international manufacturer providing end-to-end solutions to the energy, service provider,
COYOTE. Retrofit Closure. Refinement of the Breed. COYOTE Retrofit Closure. The ideal Closure for replacement or expansion 1-29
COYOTE Retrofit Closure COYOTE Closure Series: Section 1 Refinement of the Breed The ideal Closure for replacement or expansion The COYOTE Retrofi t Closure contains a ver sa tile Fiber Management System
Helical dead-ends are installed on ADSS cables over medium spans (100 to 250 meters).
Helical dead-ends are installed on ADSS cables over medium spans (100 to 250 meters). They consist of 4 armour rods installed as a direct protection on the cable and a spiral dead-end used as an anchor
LC Cable Assemblies. Fiber Optic Products Catalog. Product Facts. LC Cable Assembly. Hybrid LC-SC Cable Assembly
LC Cable Assemblies Product Facts For high performance applications/high density 125 µm Ceramic Ferrule Technology Small size 1/2 size of standard SC and FC products Singlemode and multimode Tuned singlemode
SPEC No.: ZP REVISION: 1.1 ZP ELECTRON CO.,INC. Designer. Division. Approver
TECHNICAL SPECIFICATION FOR Optical Fiber Overhead Ground Wire (OPGW) Designer Approver SPEC No.: ZP10-15389 REVISION: 1.1 Technical Supporter ZP Int ternational Division Chief Technical Engineer ZP Int
Mechanical Suspensions Single and Double
Mechanical Suspensions Single and Double Supporting spans of Optical Ground Wire cable through a wide range of line angle changes, the unique design of the lightweight AFL Mechanical Suspension installs
E R C. R E R C ; ; W T E C
WTEC and its affiliates is an engineering, manufacturing, procurement and construction company dedicated to the alternative energy market. It designs and produces products to move energy from the generation
Enhanced Management Frame (EMF)
features and benefits Individual 12-fiber modules Integrated splice capability Modules extend/retract independently Top and rear strain-relief Reduced fiber routing density Improved density Maximize scalability
THE SB01 SPLICE ENCLOSURE NOW INCLUDES A LID GASKET THAT DOES NOT REQUIRE RTV APPLICATION.
THE SB01 SPLICE ENCLOSURE NOW INCLUDES A LID GASKET THAT DOES NOT REQUIRE RTV APPLICATION. DO NOT APPLY RTV TO THE GASKET WHEN SEALING THE SB01 SPLICE ENCLOSURE. SEE SECTION 18 FOR UPDATED INSTRUCTIONS.
OPTOFIT CATALOGUE. FITTINGS FOR METALFREE (ADSS CABLES) and METAL ARMOURED (OPGW & OPPW) AERIAL CABLES WITH INTEGRATED OPTICAL FIBRES.
OPTOFIT CATALOGUE FITTINGS FOR METALFREE (ADSS CABLES) and METAL ARMOURED (OPGW & OPPW) AERIAL CABLES WITH INTEGRATED OPTICAL FIBRES. EXCLUSIVE AUSTRALIAN DISTRIBUTORS B8/8 Introduction Metalfree (ADSS
Section 1 COYOTE Closure Series
COYOTE Closure Series: Section Section COYOTE Closure Series Table of Contents Page COYOTE Closure Overview...-2 COYOTE Splice Tray & Closure Capacity Charts...-4 COYOTE Closure...-7 COYOTE PUP Closure...-9
COYOTE Terminal Dome Closure 6.5" x 22"
FEBRUARY 2015 COYOTE Terminal Dome Closure 6.5" x 22" Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
TADP 548 Transmission Line Design- Electrical Aspects
TADP 548 Transmission Line Design- Electrical Aspects Presentation 3.3 Electrical Design Clearances Part 6 Transmission & Distribution Program Parvez Rashid & Dr. Prasad Yenumula Electrical Design Clearances
FTTH ACCESS SOLUTION
QUICKDR@W FTTH ACCESS SOLUTION QUICKDR@W The fastest, easiest solution for customer network connection Creating a network that can manage future demands and take rollout problems in its stride can be a
Article number: Sheath marking ACE - TKF LTC-S RP 12x SM G.657.A1 (2x6) A-DQ(ZN)B2Y {Batch} {Year} {Length}
Description 12x SM G.657.A1 (2x6) The Loose Tube Cable Slim Rodent-Protected () is a non-metallic, loose tube outdoor duct cable, rodent protected, longitudinal water-protected, with high pulling force.
Customer Owned Copper Outside Plant Guidelines
Customer Owned Copper Outside Plant Guidelines December 2017 Introduction CommScope offers several products to extend high performance copper connectivity to the outdoor environment where cabling may be
COYOTE Closure. Origin of the Species. Key Features: PATENTED 1-14
COYOTE Closure Origin of the Species Size L (cm) W (cm) H (cm) 6.0" x 22" 22" (56) 8½" (22) 7" (18) 8.5" x 22" 22" (56) 10-3/4" (27) 9¼" (24) PATENTED Setting the bar against which all other fi ber closures
Solid PE Insulated & LAP Sheathed Air Core/Jelly Filled Cables to DIN VDE 0816
Solid PE Insulated & LAP Sheathed Air Core/Jelly Filled Cables to DIN VDE 0816 APPLICATION The cables are designed for use as connection between central fices. The cables are suitable for installation
SPIRAL VIBRATION DAMPERS FOR AAC, AAAC, ACSR, COPPER, SC/AC & SC/GZ CONDUCTORS. Part Number
SPIRAL VIBRATION DAMPERS FOR AAC, AAAC, ACSR, COPPER, SC/AC & SC/GZ CONDUCTORS Made from high impact, UV resistant, polyvinyl chloride (PVC), they are non-corrosive and do not abrade the conductor or require
COYOTE Splice Case. Value conscious and benefit-packed: The COYOTE Splice. 2-2 (440)
COYOTE Splice Case Value conscious and benefit-packed: The COYOTE Splice The combines the field-proven performance of the PREFORMED Splice Case (stainless steel) with the high capacity and craft-friendly