out of fine-grained steel S 355 MC and steel scraping plate of 500 HB telescopic- and with platereception and slight hookreception (up to 50 kg)

Size: px

Start display at page:

Download "out of fine-grained steel S 355 MC and steel scraping plate of 500 HB telescopic- and with platereception and slight hookreception (up to 50 kg)"

Jared Hudson
5 years ago
Views:

Equipment for telescopic- and wheel type loaders out of fine-grained steel S 355 MC and of 500 HB

(up to 50 kg) Examples: Weidemann, Schäffer wheel type loaders with slight hook-reception (up to

(as of 121 kg) Examples: Ahlmann, Hanomag, Zettelmeyer n Fork with welded conical sleeves All

Number of teeth heavy duty teeth 1000 mm 002357 1800 8 280 002361 2000 9 300 002366 2200 10 325

500 mm + 2 teeth set enlargement 1000 mm + 4 teeth set enlargement 2000 mm + 8 teeth set 014230

2 Equipment for telescopic- and wheel type loaders out of fine-grained steel S 355 MC and of 500 HB Loader categories farmyard loaders telescopic- and with platereception and slight hookreception (up to 50 kg) Examples: Weidemann, Schäffer wheel type loaders with slight hook-reception (up to 120 kg) Examples: Kramer, JCB, Manitou, Merlo, Schäffer heavy hookreception and 4-point-reception (as of 121 kg) Examples: Ahlmann, Hanomag, Zettelmeyer n Fork with welded conical sleeves All declarations of weight are without admission. Number of teeth heavy duty teeth 1000 mm n Green forage fork 3000 Heavy duty teeth 1400 mm, lg./ M 28 x 1, enlargement 500 mm + 2 teeth set enlargement 1000 mm + 4 teeth set enlargement 2000 mm + 8 teeth set Teeth protection n Green forage fork 5000 hydraulic foldable, with plug-in coupling L 15 3/8 incl. pressure-limiting valve Heavy duty teeth 1400 mm, lg./ M 28 x 1, Teeth protection 2

Equipment for telescopic- and wheel type loaders out of fine-grained steel S 355 MC and of 500 HB All declarations of weight are without admission.

1,55 630 005028 2800/8 (2) 940 1050 1,7 730 007701 2800/8 (2)* 1150 1500 3,1 940 009509 2980/8 (2) 940 1050 1,85 760 005244 2980/8 (2)* 1150 1500 3,3 1000 for wheel type loaders:

(1) with one reinforcement (2) with two reinforcements * incl.

1500 2,7 650 002610 2600/5 (2) 1150 1500 2,9 680 004867 2800/6 (2) 1150 1500 3,1 830 007895 2980/6 (2) 1150 1500 3,3 860 for wheel type loaders: strengthened/throughout pressure plate 000973 wearing

3 Equipment for telescopic- and wheel type loaders out of fine-grained steel S 355 MC and of 500 HB All declarations of weight are without admission / , /6 (1) , /6 (1) , /6 (2) , /6 (2) , /6 (2) , /8 (2) , /8 (2)* , /8 (2) , /8 (2)* , for wheel type loaders: strengthened/throughout pressure plate wearing mild steel 500HB in sub-construction 100 x gravel teeth (in welded sleeve) Heavy duty shovel n with high wear resistant 200 x HB (1) with one reinforcement (2) with two reinforcements * incl. strengthened/throughout pressure plate / , / , /5 (1) , /5 (2) , /5 (2) , /5 (2) , /6 (2) , /6 (2) ,3 860 for wheel type loaders: strengthened/throughout pressure plate wearing mild steel 500 HB in sub-construction 100 x15 cutting turn blade 150 x HB Shovel with round strengthened for bulk material up to 2600 mm width (without reinforcement) + 10% extra costs, Other shovels depths are also available Light duty shovel n with high wear resistant 200 x HB (1) with one reinforcement (2) with two reinforcements (2) max. outer width , (2) , (2) , (2) with continuous pressure plate , shovel n with high wear resistant 300 x HB 3

Equipment for telescopic- and wheel type loaders out of fine-grained steel S 355 MC and of 500 HB n Wheel loader shovel with high wear resistant 150x16 500HB All

83 360 007997 2400/6 850 705 0,9 380 008564 2500/6 850 705 0,97 400 n Tip-up shovel for wheel type loaders with high wear resistant 300 x30 500HB, with plug-in coupling

pressing-limiting valve 011881 2400 1370 1500 2,9 1700 011880 2500 1370 1500 3,2 1750 011879 2600 1370 1500 3,45 1800 011847 2800 1370 1500 3,75 1850 011878 2980 1370

plug-in coupling pressinglimiting valve 013909 2600 1000 1300 3,0 2.300 013821 2800 1000 1300 3,3 2.450 013910 2980 1000 1300 3,6 2.

4 Equipment for telescopic- and wheel type loaders out of fine-grained steel S 355 MC and of 500 HB n Wheel loader shovel with high wear resistant 150x16 500HB All declarations of weight are without admission / , / , / / , / , n Tip-up shovel for wheel type loaders with high wear resistant 300 x30 500HB, with plug-in coupling L 15 3/8, incl. pressing-limiting valve , , , , , wearing mild steel 500 HB in sub-construction 100x20 n Tip-up grap-shovel for wheel type loaders with high wear resistant 300x30 500HB, with plug-in coupling L 15 3/8, incl. pressinglimiting valve , , , n Multipurpose shovel with high wear resistant steel scraping plate 150x HB, mit Steckkupplung Standard L12 3/ gravel teeth (in welded sleeve) road protection This picture shows the model with gravel teeth, which are extra costs 4

Equipment for telescopic- and wheel type loaders out of fine-grained steel S 355 MC and of 500 HB All

Fork teeth Loading capacity in kg/paar (LSP 500 mm) Ground clearance 002576 1200 100x45x1100 2500 152

310 Mehrpreis Pallet fork n with quality teeth made of 30MN 5VS/ISO 002637 Available with larger fork

frame up to 3,5 to (without teeth) FEM 3 008512 Pallet fork frame up to 4,5 to (without teeth) FEM 3

FEM2 with holder 000927 Great bale heavy teeth - summit 1100 mm lg.

and round bales, with plug-in coupling L 12 3/8 000945 000946 * special design Pressure limiting valve

vehicle type: Bobcat, Dieci, Merlo, MF, New Holland etc.) Item- No. Heavy duty teeth 1000 mm lg.

100mm enlargement per 100mm 004412 Cat. L light hook admission Executions 004413 Cat.

5 Equipment for telescopic- and wheel type loaders out of fine-grained steel S 355 MC and of 500 HB All declarations of weight are without admission. Item- No. Fork teeth Loading capacity in kg/paar (LSP 500 mm) Ground clearance x45x (FEM 2B) x50x (FEM 3B) x50x (FEM 3B) 310 Mehrpreis Pallet fork n with quality teeth made of 30MN 5VS/ISO Available with larger fork carriages / per 100 mm Pallet fork frame up to 2,5 to (without teeth) FEM Pallet fork frame up to 3,5 to (without teeth) FEM Pallet fork frame up to 4,5 to (without teeth) FEM Great bale heavy teeth - summit 1100 mm lg. FEM2 with holder Great bale heavy teeth - summit 1100 mm lg. FEM3 with holder closed open * Bale claw n for square and round bales, with plug-in coupling L 12 3/ * special design Pressure limiting valve of 210 bar is necessary (depending on vehicle type) Pressure retention valve is necessary (depending on vehicle type: Bobcat, Dieci, Merlo, MF, New Holland etc.) Item- No. Heavy duty teeth 1000 mm lg. M Bale skewer n enlargement per 100mm enlargement per 100mm Cat. L light hook admission Executions Cat. M medium hook admission (up to 120 kg) Cat. S heavy hook admission (as of 121 kg) and 4-point-admission from telescopic loader to telescopic loader (only Claas, JCB, Manitou, Merlo) Adapter n for wheel type loaders / telescopic loaders on rapid change frame Euronorm 5

Equipment for telescopic- and wheel type loaders out of fine-grained steel S 355 MC and of 500 HB n Working platform incl.

002565 guard rail bolted up to 2 m 007573 tool deposit 007572 forklift attachment wider working platform on request produced according to 2006/42/EG and LSV-Information T01 n Silage

two reinforcements 005058 1500 (1) 750 810 0,83 490 004717 1650 (1) 750 810 0,9 540 005946 1800 (2) 750 810 1 580 006295 2000 (2) 750 810 1,1 620 012155 2200 (2) 750 810 1,2 640 012130

(depending on vehicle type (Bobcat, Dieci, Merlo, MF, New Holland etc.

500HB, with plug-in coupling L 12 3/8, maximum operating pressure P max = 210 bar 007707 1800 750 810 1 490 004992 2000 750 810 1,1 515 004706 2200 750 810 1,2 545 004773 2400 750 810

6 Equipment for telescopic- and wheel type loaders out of fine-grained steel S 355 MC and of 500 HB n Working platform incl. wooden rail and slip-proof step grid inside inside All declarations of weight are without admission guard rail bolted up to 2 m tool deposit forklift attachment wider working platform on request produced according to 2006/42/EG and LSV-Information T01 n Silage grip shovel with high wear resistant 150x16 500HB, with plug-in coupling L 12 3/8, maximum operating pressure P max = 210 bar in reinforced version, (1) with one reinforcement (2) with two reinforcements (1) , (1) , (2) (2) , (2) , (2) , x HB je 100 mm Pressure limiting valve of 210 bar is necessary (depending on vehicle type) Pressure retention valve is necessary (depending on vehicle type (Bobcat, Dieci, Merlo, MF, New Holland etc.) hydraulic connection plug flat sealing L 12 3/8 piece hydraulic connection socket flat sealing L 12 3/8 piece n Disposal grip shovel with high wear resistant 150x16 500HB, with plug-in coupling L 12 3/8, maximum operating pressure P max = 210 bar , , , x HB je 100 mm lock plate per device side plates (incl. screws) per device Pressure limiting valve of 210 bar is necessary depending on vehicle type Pressure retention valve is necessary (depending on vehicle type: Bobcat, Dieci, Merlo, MF, New Holland etc.) hydraulic connection plug flat sealing L 12 3/8 piece hydraulic connection socket flat sealing L 12 3/8 piece 6

pressure limiting valve, maximum operating pressure P(max) = 210 bar 000946 Pressure retention valve is necessary (depending on vehicle type: Bobcat, Dieci, Merlo, MF, New Holland etc.

1060 2,0 1000 012010 2600 940 1060 2,2 1060 Silage grip shovel XL n with high wear resistant 200x25 500HB, with plug-in coupling L 15 3/8, incl.

7 Equipment for telescopic- and wheel type loaders out of fine-grained steel S 355 MC and of 500 HB All declarations of weight are without admission , , x HB je 100 mm Silage grip shovel n mit 4 cylinder with high wear resistant 150x16 500HB, with plug-in coupling L 15 3/8, incl. pressure limiting valve, maximum operating pressure P(max) = 210 bar Pressure retention valve is necessary (depending on vehicle type: Bobcat, Dieci, Merlo, MF, New Holland etc.) hydraulic connection plug flat sealing L 15 3/8 piece hydraulic connection socket flat sealing L 15 3/8 piece , , , , Silage grip shovel XL n with high wear resistant 200x25 500HB, with plug-in coupling L 15 3/8, incl. pressure limiting valve, maximum operating pressure P(max) = 210 bar Pressure retention valve is necessary (depending on vehicle type: Bobcat, Dieci, Merlo, MF, New Holland etc.) cutting turn blade 150x HB per meter side lock plate edged incl. screws / piece hydraulic connection plug flat sealing L 15 3/8 piece hydraulic connection socket flat sealing L 15 3/8 piece , , , Pressure retention valve is necessary (depending on vehicle type: Bobcat, Dieci, Merlo, MF, New Holland etc.) side lock plate edged incl. screws / piece cutting turn blade 150x HB per meter hydraulic connection plug flat sealing L 15 3/8 piece hydraulic connection socket flat sealing L 15 3/8 piece hydraulic connection plug flat sealing L 15 1/2 piece hydraulic connection socket flat sealing L 15 1/2 piece Silage grip shovel XXL n with high wear resistant 200x25 500HB, with plug-in coupling L 15 3/8, incl. pressure limiting valve, maximum operating pressure P (max) = 210 bar 7

Equipment for telescopic- and wheel type loaders out of fine-grained steel S 355 MC and of 500 HB n Multipurpose fork with plug-in coupling L 15 3/8, with welded conical sleeves Heavy duty teeth 1000

8 Equipment for telescopic- and wheel type loaders out of fine-grained steel S 355 MC and of 500 HB n Multipurpose fork with plug-in coupling L 15 3/8, with welded conical sleeves Heavy duty teeth 1000 mm , , , , , , ,2 720 All declarations of weight are without admission Pressure limiting valve of 210 bar is necessary (depending on vehicle type) Pressure retention valve is necessary (depending on vehicle type: Bobcat, Dieci, Merlo, MF, New Holland etc.) hydraulic connection plug flat sealing L 12 3/8 piece hydraulic connection socket flat sealing L 12 3/8 piece n Pushing blade fixed, with 150 x HB for polyurethan-scraping plate (150x20 mm) / per 1000 mm grain blade on request n Silage basset with admission for loader Number of teeth Extension with admission for loader* Lenght ca. ca. ca * extensions also suitable for grain slider. Attention! and width vary depending on loader typ 8

Equipment for rapid change frame Euronorm out of fine-grained steel S 355 MC and of 500 HB 002509 1500 (1) 750 810 0,83 420 002510 1650 (1) 750 810 0,90 478 004402 1800 750 810 1,00 512 004788 2000

(max) = 210 bar (1) just for central locking (2) in strengthened version for rapid change frame as of 100 kw (136 PS) 002635 Strengthened version for rapid change frame from 100 kw (136 PS):

(depending on vehicle type) 010546 side lock plate edged incl.

9 Equipment for rapid change frame Euronorm out of fine-grained steel S 355 MC and of 500 HB (1) , (1) , , , , (2) , Silage grip shovel n with high wear resistant 150x16 500HB, with plug-in coupling L 12 3/8, maximum operating pressure P (max) = 210 bar (1) just for central locking (2) in strengthened version for rapid change frame as of 100 kw (136 PS) Strengthened version for rapid change frame from 100 kw (136 PS): additional bearing of the gripper, additional reinforcement, thicker and wider pressure plate, stronger upper gripper 200x HB per 100 mm Pressure limiting valve of 210 bar is necessary (depending on vehicle type) side lock plate edged incl. screws / piece , , , , cutting turn blade 150x HB per meter side lock plate edged incl. screws / piece Silage grip shovel XL n with high wear resistant 200x25 500HB, with plug-in coupling L 15 3/8, incl. pressure limiting valve, maximum operating pressure P max = 210 bar , , , , Disposal grip shovel n with high wear resistant 150x16 500HB, with plug-in coupling L 12 3/ Lock plate per device Side part (incl. screws) per device Steel scraping plate 200 x HB per 100 mm 9

Multipurpose fork with plug-in coupling L 15 3/8

1650 7 1,3 480 006589 1800 8 1,4 520 002537 2000 9

n Multi task gripper with welded conical sleeves with

length 002529 1220 0,7 7 900 285 002532 1380 0,8 8

900 383 n Bale claw for square and round bales with

1750 700 240 002518 1000 2000 700 245 * special

M22 002515 1200 1100 2 119 008515 1200 1100 3 127

10 Equipment for rapid change frame Euronorm out of fine-grained steel S 355 MC and of 500 HB n Multipurpose fork with plug-in coupling L 15 3/8 Heavy duty teeth 1000 mm , , , , , ,0 670 n Multi task gripper with welded conical sleeves with plug-in coupling L 12 3/8 Number of teeth teeth length , , , , n Bale claw for square and round bales with plug-in coupling L 12 3/8 closed open * * special design n Bale skewer Manure teeth 1100 mm lg. M Heavy duty teeth 1000mm lg. M28 enlargement per 100mm enlargement per 100mm 10

Equipment for rapid change frame Euronorm out of fine-grained steel S 355 MC and of 500 HB inside inside 005589

wooden rail and slip-proof step grid 002565 guard rail bolted up to 2 m 007573 tool deposit 007572 forklift

Gewicht 002569 1200 80x40x800 2000 76 145 002570 1200 80x40x1000 2000 76 155 002573 1200 80x40x1200 2000 76 165

teeth) 002636 Available with larger fork carriages / per 100 mm 000967 big bale heavy duty tooth 1000 lg.

polyurethan-scraping plate 002579 (150x20 mm) / per 1000 mm grain blade on request Pushing blade n fixed, with

11 Equipment for rapid change frame Euronorm out of fine-grained steel S 355 MC and of 500 HB inside inside Working platform AP I n incl. wooden rail and slip-proof step grid guard rail bolted up to 2 m tool deposit forklift attachment wider working platform on request Fork teeth Loading capacity in kg/pair (LSP 500 mm) Ground clearance Gewicht x40x x40x x40x Mehrpreis Pallet fork n with quality teeth made of 30MN 5VS/ISO Pallet fork frame up to 2,0 to (without teeth) Available with larger fork carriages / per 100 mm big bale heavy duty tooth 1000 lg. FEM 2 with attachment for polyurethan-scraping plate (150x20 mm) / per 1000 mm grain blade on request Pushing blade n fixed, with 150 x HB (fixed) (fixed) Green forage pushing blade n for tractor, with three point admission, telescopic, with 150 x HB 11

1500 670 680 430 465 002542 1800 670 680 520 520 002545 2000 670 680 580 555 002546 2200

sleeve) This picture shows the model with gravel teeth, which are extra costs n Manure

700 7 800 110 002355 1370 700 8 800 124 002359 1550 700 9 800 138 002364 1730 700 10 800

150x16 500 HB (1) with one reinforcement Gewicht 002408 1250/3 700 830 0,50 144 002411

12 Equipment for rapid change frame Euronorm out of fine-grained steel S 355 MC and of 500 HB n Multipurpose shovel 4 in 1 with high wear resistant 150x HB in Liter Mehrpreis gravel teeth (in welded sleeve) This picture shows the model with gravel teeth, which are extra costs n Manure fork with welded conical sleeves Number of teeth Number of lenght Gewicht Manure forks with 900 mm or 1100 mm length of teeth: on request! n Shovel light duty version for bulk cargo up to 800 kg/m 3 with high wear resistant 150x HB (1) with one reinforcement Gewicht / , / , / , / , / , /3 (1) , /3 (1) ,

Equipment for rapid change frame Euronorm out of fine-grained steel S 355 MC and of 500 HB Art.-Nr.

2400/5 (1) 700 830 0,96 314 Schaufel n heavy duty version for bulk cargo up to 1300 kg/m 3 with high wear resistant 150x16 500 HB (1) with one reinforcement Art.-Nr.

shovel side parts and reinforcement on request. Schaufel XL n heavy duty version for bulk cargo up to 800 kg/m 3 with high wear resistant 150x16 500 HB (1) with one reinforcement Art.-Nr.

13 Equipment for rapid change frame Euronorm out of fine-grained steel S 355 MC and of 500 HB Art.-Nr / , / , / , / , / , /5 (1) , /5 (1) , Schaufel n heavy duty version for bulk cargo up to 1300 kg/m 3 with high wear resistant 150x HB (1) with one reinforcement Art.-Nr / , / , / , /3 (1) , /3 (1) , Edge protector (for potatoes) for shovel side parts and reinforcement on request. Schaufel XL n heavy duty version for bulk cargo up to 800 kg/m 3 with high wear resistant 150x HB (1) with one reinforcement Art.-Nr / , / , / , /5 (1) , /5 (1) , /5 (2) ,3 385 Edge protector (for potatoes) for shovel side parts and reinforcement on request. Schaufel XL n heavy duty versiong for bulk cargo up to 1300 kg/m 3 with high wear resistant 150x HB (1) with one reinforcement (2) with two reinforcements 13

Equipment for rapid change frame Euronorm out of fine-grained steel S 355 MC and of 500 HB n

150x16 500 HB (1) with one reinforcement 002421 1800/3 1040 1230 1,20 300 002426 2000/3 1040

Schaufel XXL heavy duty version for bulk cargo up to 1300 kg/m 3 with high wear resistant

1,20 355 002451 2000/5 1040 1230 1,30 390 002447 2200/5 (1) 1040 1230 1,40 425 002470 2400/5

14 Equipment for rapid change frame Euronorm out of fine-grained steel S 355 MC and of 500 HB n Schaufel XXL light duty version for bulk cargo up to 800 kg/m 3 with high wear resistant 150x HB (1) with one reinforcement / , / , /3 (1) , /3 (1) , n Schaufel XXL heavy duty version for bulk cargo up to 1300 kg/m 3 with high wear resistant 150x HB (1) with one reinforcement (2) with two reinforcements / , / , /5 (1) , /5 (1) , /5 (2) , n Kock Rapid change frame

Equipment for farmyard loaders out of fine-grained

1010/5 800 900 0,48 155 007435 1100/5 800 900 0,52

800 900 0,64 190 002405 1500/5 800 900 0,71 205

admission or light hook admission (up to 50 kg)

900 0,57 175 006626 1350/5 800 900 0,64 190 for

Shovel n Number of teeth Teeth length 002628 880

700 7 800 105 Manure fork n with welded conical

length 002354 1220 600 7 800 80 004760 1370 600 8

15 Equipment for farmyard loaders out of fine-grained steel S 355 MC / , / , / , / , / , / , / , Shovel n with plate admission or light hook admission (up to 50 kg) / , / , / , for farmyard loaders with rapid change frame Euronorm Shovel n Number of teeth Teeth length Manure fork n with welded conical sleeves» For communal tractor Number of teeth Teeth length Manure fork n with welded conical sleeves 15

800 kg lifting power with welded conical sleeves with plug-in

0,40 108 008714 1010 6 800 0,45 112 008715 1100 6 800 0,50 120

with welded conical sleeves with plug-in coupling L 12 3/8

1010 6 800 0,58 165 006297 1100 6 800 0,63 176 006515 1250 7 800

wear resistant 150x16 500HB, with plug-in coupling L 12 3/8

16 Equipment for farmyard loaders out of fine-grained steel S 355 MC n Kroko single cylinder with holding down clamp up to ca. 800 kg lifting power with welded conical sleeves with plug-in coupling L 12 3/8 Number of teeth Teeth length , , , , n Multi task gripper single cylinder with welded conical sleeves with plug-in coupling L 12 3/8 Number of teeth Teeth length , , , , n Pelican shovel with screwed side parts, with high wear resistant 150x16 500HB, with plug-in coupling L 12 3/ , , ,

Equipment for farmyard loaders out of fine-grained steel S 355 MC 002507 1200 750

1650 750 810 0,90 480 Silage grip shovel n with plate admission or light hook

L up to 50 kg) with high wear resistant steel scraping plate 150x16 500HB, with

Loading capacity in kg/pair (LSP 500 mm) Loading capacity (FEM 2A) 008466 1080

1500 76 110 Palett fork n (light version) with quality teeth made of 30MN

Loading capacity (FEM 2A) 002588 1200 80x40x1000 1500 76 122 Pallet fork n with

500 mm) Loading capacity (FEM 2A) 007578 1200 80x40x800 2000 76 131 007499 1200

17 Equipment for farmyard loaders out of fine-grained steel S 355 MC , , , , Silage grip shovel n with plate admission or light hook admission (Cat. L up to 50 kg) with high wear resistant steel scraping plate 150x16 500HB, with plug-in coupling L 12, maximum operating pressure P (max) = 210 bar Fork teeth Loading capacity in kg/pair (LSP 500 mm) Loading capacity (FEM 2A) x40x x40x x40x Palett fork n (light version) with quality teeth made of 30MN 5VS/ISO» For communal tractor Fork teeth Loading capacity in kg/pair (LSP 500 mm) Loading capacity (FEM 2A) x40x Pallet fork n with quality teeth made of 30MN 5VS/ISO Fork teeth Loading capacity in kg/pair (LSP 500 mm) Loading capacity (FEM 2A) x40x x40x x40x Pallet fork n with quality teeth made of 30MN 5VS/ISO Shovels n Have a lock at Equipment for rapid change frame Euronorm 17

Equipment for clip loaders out of fine-grained steel S 355 MC n Manure fork with welded conical sleeves Number

II 1590 9 800 115 002379 Gr. III 1010 6 800 83 002387 Gr. III 1370 8 800 110 002394 Gr.

III 2090 12 800 140 Manure forks with 900 mm or 1100 mm length of teeth: on request! n Shovels 002406 Gr.

II and III light duty version with excess width for bulk cargo up to 800 kg/m 3 with high wear resistant 150x16

18 Equipment for clip loaders out of fine-grained steel S 355 MC n Manure fork with welded conical sleeves Number of teeth Teeth length Gr. II Gr. II Gr. II Gr. III Gr. III Gr. III Gr. III Manure forks with 900 mm or 1100 mm length of teeth: on request! n Shovels Gr. II 850 0, Gr. III , n Shovel Gr. II and III light duty version with excess width for bulk cargo up to 800 kg/m 3 with high wear resistant 150x HB , , , , n Shovel Gr. II and III heavy duty version with excess width for bulk cargo up to 1300 kg/m 3 with high wear resistant 150x HB , , , ,

Head office Kock & Sohn Höfener Straße 1+3 48496 Hopsten-Schale wheel and tool systems We make wheels completely!

de Field service midfield /southwest Markus Held Mobil 01 73 / 7 28 63 21 held@kock-sohn.de Field service south Thomas Beer Mobil 01 73 / 7 28 63 24 beer@kock-sohn.

19 Head office Kock & Sohn Höfener Straße Hopsten-Schale wheel and tool systems We make wheels completely! Field service north / northwest Wilfried Hagen Mobil / hagen@kock-sohn.de Head office Field service east Sven Grauwinkel Mobil / grauwinkel@kock-sohn.de Field service midfield /southwest Markus Held Mobil / held@kock-sohn.de Field service south Thomas Beer Mobil / beer@kock-sohn.de Business hours: Monday - Thursday Friday Contact persons o clock o clock Sales manager Holger Lohmeyer / lohmeyer@kock-sohn.de Sales department Tyres / wheels Andre Bresch / bresch@kock-sohn.de Natalia Pauls / pauls@kock-sohn.de Wheels / twin systems Jörg Dresselhaus / dresselhaus@kock-sohn.de Working equipment Bettina Freye / freye@kock-sohn.de Fax / Distribution / export Christine Giese / giese@kock-sohn.de Robert Brinkmann / brinkmann@kock-sohn.de Account staff Linda-Jasmin Motz / motz@kock-sohn.de General office Telefon / Fax /

wheel and tool systems Kock & Sohn Räder GmbH Höfener Straße 1+3 D - 48496

20 wheel and tool systems Kock & Sohn Räder GmbH Höfener Straße 1+3 D Hopsten-Schale Fon + 49 (0) / Fax + 49 (0) / info@kock-sohn.de

ATTACH 0217 EN. merlo attachments E.U. version

ATTACH 0217 EN. merlo attachments E.U. version ATTACH 0217 EN merlo attachments 2017 E.U. version merlo carriages ZM2 carriage CARRIAGE MODEL Width HEIGHT Max. ZM2 1190 381 2500/4500 ZM3 - ZM3 3TL* carriage CARRIAGE MODEL Width HEIGHT Max. *Triple