20/138SL Technical Specifications
|
|
- Jody Hancock
- 5 years ago
- Views:
Transcription
1 Manual # /138SL Technical Specifications Revision Date IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA Tel: FAX: Website: Copyright 2012 Iowa Mold Tooling Co., Inc. All rights reserved No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written permission of Iowa Mold Tooling Co., Inc. Iowa Mold Tooling Co., Inc. is an Oshkosh Corporation company. Printed on 12 September, 2012
2
3 i Contents Revisions... ii Technical Data and Charts 3 20/138SL Technical Specifications /138SL Pressure Settings /138SL Pressure Settings with Remote Control...6 Winch Technical Data /138SL Lifting Capacities /138SL K2 Capacity Chart /138SL K3 Capacity Chart /138SL K4 Capacity Chart /138SL K5 Capacity Chart /138SL K6 Capacity Chart /138SL K7 Capacity Chart /138SL K8 Capacity Chart /138SL Geometric Configuration...16 Stabilizer Dimensions, Fixed Legs, 18 tm up...17 Stabilizer Dimensions, Swing-up, 18 tm up...18 Stowed Dimensions...19 Mounting Dimensions /138SL Swing Clearance...21 Hydraulic Schematics 23 Hydraulic Diagram - 20/138SL Danfoss 6-Function Radio...24 Hydraulic Diagram - 20/138SL Danfoss 7-Function Radio...25 Hydraulic Diagram - 20/138SL Hydrocontrol 6-Function Manual...26 Hydraulic Diagram - 20/138SL Hydrocontrol 6-Function Radio...27
4 ii Contents Revisions DATE LOCATION DESCRIPTION Added swing clearance dimensions Geometric Added stabilizer length and extension, stabilizer drawings. configuration Specs, ECN Updated stabilizer wording. Stabilizer drawings Specifications Updated crane weight to include mounting kit, tank Drawings Added stowed dimensions, mounting dimensions, and winch settings drawings.
5 3 C HAPTER 1 Technical Data and Charts In This Chapter 20/138SL Technical Specifications /138SL Pressure Settings /138SL Pressure Settings with Remote Control...5 Winch Technical Data /138SL Lifting Capacities /138SL K2 Capacity Chart /138SL K3 Capacity Chart /138SL K4 Capacity Chart /138SL K5 Capacity Chart /138SL K6 Capacity Chart /138SL K7 Capacity Chart /138SL K8 Capacity Chart /138SL Geometric Configuration...16 Stabilizer Dimensions, Fixed Legs, 18 tm up...17 Stabilizer Dimensions, Swing-up, 18 tm up...18 Stowed Dimensions...19 Mounting Dimensions /138SL Swing Clearance...21
6 4 20/138SL Technical Specifications Manual # /138SL Technical Specifications 20/138SL HYDRAULIC HYDRAULIC HYDRAULIC HYDRAULIC HYDRAULIC HYDRAULIC HYDRAULIC Crane Rating* 133,085 ft lb (18.4 tm) 129,470 ft lb (17.9 tm) 126,580 ft lb (17.5 tm) 122,960 ft lb (17 tm) 120,070 ft lb (16.6 tm) 116,450 ft lb (16.1 tm) 114,280 ft lb (15.8 tm) Maximum Horizontal Reach 27' 3" (8.3 m) 33' 10" (10.3 m) 41' 0" (12.5 m) 48' 7" (14.8 m) 56' 5" (17.2 m) 63' 8" (19.4 m) 71' 2" (21.7 m) Maximum Vertical Reach 35' 1" (10.7 m) 42' 0" (12.8 m) 49' 3" (15.0 m) 56' 5" (17.2 m) 64' 4" (19.6 m) 71' 10" (21.9 m) 79' 1" (24.1 m) Maximum Capacity 15,345 lb (6960 kg) 14,505 lb (6580 kg) 13,715 lb (6220 kg) 12,985 lb (5890 kg) 12,745 lb (5780 kg) 12,080 lb (5480 kg) 11,550 lb (5240 kg) Max Max Reach 4870 lb ( 2210 kg) 3640 lb (1650 kg) 2710 lb (1230 kg) 2030 lb (920 kg) 1500 lb (680 kg) 1080 lb (490 kg) 815 lb (370 kg) Crane Weight ** 4145 lb (1880 kg) 4485 lb (2035 kg) 4830 lb (2190 kg) 5135 lb (2330 kg) 5410 lb (2455 kg) 5645 lb (2560 kg) 5830 lb (2645 kg) Hook Approach Vertical 7' 3" (2.21 m) 7' 6" (2.29 m) 7' 10" (2.38 m) 8' 1" (2.47 m) 8' 5" (2.56 m) 8' 8" (2.65 m) 9' 0" (2.74 m) Horizontal 2' 3" (0.69 m) 2' 5" (0.74 m) 2' 7" (0.79 m) 2' 9" (0.84 m) 2' 11" (0.89 3' 1" (0.94 m) 3' 3" (1.0 m) m) Center of Gravity - Stored Vertical 2' 6" (770 mm) 2' 8" (820 mm) 2' 8" (815 mm) 2' 9" (835 mm) 2' 10" (855 mm) 2' 10" (875 mm) 2' 11" (890 mm) Horizontal (C/L RotTo Bridge) 13.4" (340 mm) 12.4" (315 mm) 12.2" (310 mm) 11.8" (300 mm) 11.2" (285 mm) 10.6" (270 mm) 10.4" (265 mm) * Crane rating (ft-lb) is the rated load (lb) multiplied by the respective distance (ft) from centerline of rotation with all extensions retracted and the inner and outer booms in a horizontal position, per ANSI B ** Crane weight is for standard crane with tank & 4-bolt mounting kit. Does not include stabilizers, oil. 20/138SL TECHNICAL SPECIFICATIONS Stabilizer Pad Diameter 7" (175 mm) Crane Storage Height 7' 6" (2295 mm) Mounting Space *** 2' 11" (880 mm) Rotational Torque 17,555 ft lb (2.4 tm) Rotation 400 Optimum Pump Performance 14.5 gpm (55 L/min) System Pressure 4,785 psi (330 Bar) Oil Reservoir Capacity 23.8 gal (90 L) Stabilizer Extension Span Standard (manual out / hydraulic down) 18' 3" (5575 mm) Weight 605 lb (275 kg) Option (hydraulic out / hydraulic down) 21' 2" (6455 mm) Weight 785 lb (355 kg) *** Maximum swing clearance radius required is 25" (635 mm) at 8' (2430 mm) from top of chassis frame. MINIMUM CHASSIS SPECIFICATIONS Front Axle Rating (GAWR) Rear Axle Rating (GAWR) Resistance To Bending Moment 14,000 lb (6350 kg) 40,000 lb (18,145 kg) 2,000,000 in-lb (230,425 kg-m)
7 Chapter 1 Technical Data and Charts 5 20/138SL Pressure Settings WORKING PRESSURE ON MAIN-RELIEF VALVES & PORT RELIEF VALVES Function Direction Port Pressure Setting Main-relief valve 4785 psi (330 bar) Rotation system Right A P Left B P Boom cylinder Down A 1450 psi (100 bar) Up B 4930 psi (340 bar) Jib cylinder Up A 4930 psi (340 bar) Down B 2900 psi (200 bar) Extension cylinders Extend A P Retract B P Rotator Right A 2900 psi (200 bar) Left B 2900 psi (200 bar) Grab Open A 2900 psi (200 bar) Close B 2900 psi (200 bar) Separate stabilizer valve All 2175 psi (150 bar) WORKING PRESSURE ON LOAD-HOLDING VALVES Function Direction Port Opening Pressure Boom cylinder 5075 psi (350 bar) Jib cylinder 5075 psi (350 bar) Rotation system 2685 psi (185 bar) Extension cylinders Extend A 3045 psi (210 bar) Retract B 6235 psi (430 bar) PRESSURE SETTING FOR LOAD-MOMENT LIMITATION (LMB) Load moment limitation (LMB) 4640 psi (320 bar) HDL 4205 psi (290 bar) MAXIMUM PUMP PERFORMANCE Pump performance 14.5 gal/min (55 l/min)
8 6 20/138SL Technical Specifications Manual # /138SL Pressure Settings with Remote Control WORKING PRESSURE ON MAIN-RELIEF VALVES & PORT RELIEF VALVES Function Direction Port Port-Relief Valve Pressure Setting Load-Sense Pressure Adjustment Main-relief valve 4785 psi (330 bar) 4785 psi (330 bar) Rotation system Right A P 2610 psi (180 bar) Left B P 2610 psi (180 bar) Boom cylinder Down A 1815 psi (125 bar) 1450 psi (100 bar) Up B 5075 psi (350 bar) 5075 psi (350 bar) Jib cylinder Up A 5075 psi (350 bar) 5075 psi (350 bar) Down B 2755 psi (190 bar) 2320 psi (160 bar) Extension cylinders Extend A P - Retract B P - Rotator Right A P psi ( bar) Left B P psi ( bar) Grab Open A P psi ( bar) Close B P psi ( bar) Winch (1.5 metric T) Lift A P 2320 psi (160 bar) Lower B P 2320 psi (160 bar) Winch (2.5 metric T) Lift A P 2685 psi (185 bar) Lower B P 2685 psi (185 bar) Separate stabilizer valve All 2175 psi (150 bar) WORKING PRESSURE ON LOAD-HOLDING VALVES Function Direction Opening Pressure Rotation System Right 2685 psi (185 bar) Left 2685 psi (185 bar) Boom cylinder Up 5075 psi (350 bar) Down - Jib cylinder Up 5075 psi (350 bar) Down 3045 psi (210 bar) Extension cylinders Extend 3045 psi (210 bar) Retract 6235 psi (430 bar) PRESSURE SETTINGS FOR LOAD-MOMENT LIMITATION (LMB) Load moment limitation 4570 psi (315 bar) (LMB) HDL 4135 psi (285 bar) MAXIMUM PUMP PERFORMANCE Pump performance 18.5 gal/min (70 l/min)
9 Chapter 1 Technical Data and Charts 7 Winch Technical Data 1.5 T Winch (P9) (3305 lb / 1500 kg) 2.5 T Winch (P15) (5510 lb / 2500 kg) PERFORMANCE (at 2175 psi (150 bar)) Maximum wire pull - 1st layer 3305 lb (1500 kg) 5510 lb (2500 kg) Maximum wire pull - 2nd layer 3020 lb (1370 kg) 5070 lb (2300 kg) Maximum wire pull - 3rd layer 2278 lb (1260 kg) 4630 lb (2100 kg) Maximum wire pull - 4th layer 2580 lb (1170 kg) 4300 lb (1950 kg) WIRE SPEED (at 10.5 gpm (40 l/min)) Maximum wire speed - 1st layer 72 ft/min (22 m/min) 79 ft/min (24 m/min) Maximum wire speed - 2nd layer 79 ft/min (24 m/min) 85 ft/min (26 m/min) Maximum wire speed - 3rd layer 85 ft/min (26 m/min) 92 ft/min (28 m/min) Maximum wire speed - 4th layer 92 ft/min (28 m/min) 98 ft/min (30 m/min) WEIGHTS Tare weight, winch 143 lb (65 kg) 198 lb (90 kg) Fixed parts (valve section, brackets, 110 lb (50 kg) 110 lb (50 kg) hoses, etc.) Wire 10 mm dia x 50 m 66 lb (30 kg) 66 lb (30 kg) Spare parts, single snatch block 66 lb (30 kg) 66 lb (30 kg) Spare parts, double snatch block 88 lb (40 kg) 88 lb (40 kg)
10 8 20/138SL Technical Specifications Manual # /138SL Lifting Capacities 20/138SL - 2 Hydraulic 9370 lb 4250 kg 14'-1" 4.3 m 20/138SL - 3 Hydraulic 6435 lb 2920 kg 20'-4" 6.2 m 4870 lb 2210 kg 26'-11" 8.2 m 8975 lb 4070 kg 14'-5" 4.4 m 20/138SL - 4 Hydraulic 6105 lb 2770 kg 20'-8" 6.3 m 4540 lb 2060 kg 26'-11" 8.2 m 3640 lb 1650 kg 33'-6" 10.2 m 8600 lb 3900 kg 14'-9" 4.5 m 20/138SL - 5 Hydraulic 5755 lb 2610 kg 21'-0" 6.4 m 4210 lb 1910 kg 27'-3" 8.3 m 3305 lb 1500 kg 33'-10" 10.3 m 2710 lb 1230 kg 40'-8" 12.4 m 8225 lb 3730 kg 15'-1" 4.6 m 20/138SL - 6 Hydraulic 5445 lb 2470 kg 21'-0" 6.4 m 3925 lb 1780 kg 27'-7" 8.4 m 3020 lb 1370 kg 34'-1" 10.4 m 2425 lb 1100 kg 41'-0" 12.5 m 2030 lb 920 kg 48'-3" 14.7 m 7895 lb 3580 kg 15'-1" 4.6 m 20/138SL - 7 Hydraulic 5160 lb 2340 kg 21'-4" 6.5 m 3660 lb 1660 kg 27'-11" 8.5 m 2755 lb 1250 kg 34'-5" 10.5 m 2160 lb 980 kg 41'-4" 12.6 m 1765 lb 800 kg 48'-7" 14.8 m 1500 lb 680 kg 56'-1" 17.1 m 7540 lb 3420 kg 15'-5" 4.7 m 4850 lb 2200 kg 21'-8" 6.6 m 3375 lb 1530 kg 27'-11" 8.5 m 2470 lb 1120 kg 34'-5" 10.5 m 1895 lb 860 kg 41'-4" 12.6 m 1500 lb 680 kg 48'-7" 14.8 m 1235 lb 560 kg 56'-1" 17.1 m 1080 lb 490 kg 63'-4" 19.3 m 20/138SL - 8 Hydraulic 7295 lb 3310 kg 15'-9" 4.8 m 4675 lb 2120 kg 22'-0" 6.7 m 3195 lb 1450 kg 28'-3" 8.6 m 2315 lb 1050 kg 34'-9" 10.6 m 1740 lb 790 kg 41'-8" 12.7 m 1345 lb 610 kg 48'-11" 14.9 m 1080 lb 490 kg 56'-5" 17.2 m 925 lb 420 kg 63'-8" 19.4 m 815 lb 370 kg 70'-10" 21.6 m
11 Chapter 1 Technical Data and Charts 9 20/138SL K2 Capacity Chart IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 20/138SL K2 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulaci ón de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. 33' (10.06m) LB KG 30' (9.14m) 27' (8.23m) 24' (7.32m) 21' (6.40m) 18' (5.49m) 15' (4.57m) 12' (3.66m) 9' (2.74m) 6' (1.83m) ' (0.91m) 0 MOUNTING SURFACE 0 CENTERLINE 3' (0.91m) 6' (1.83m) 9' (2.74m) 12' (3.66m) 15' (4.57m) 18' (5.49m) 21' (6.40m) 24' (7.32m) 27' (8.23m)
12 10 20/138SL Technical Specifications Manual # /138SL K3 Capacity Chart IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 20/138SL K3 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulaci ón de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. LB KG 42' (12.80m) 36' (10.97m) 30' (9.14m) 24' (7.32m) 18' (5.49m) 12' (3.66m) ' (1.83m) 0 MOUNTING SURFACE 0 CENTERLINE ' (0.91m) 6' (1.83m) 9' (2.74m) 12' (3.66m) 15' (4.57m) 18' (5.49m) 21' (6.40m) 24' (7.32m) 27' (8.23m) 30' (9.14m) 33' (10.06m)
13 Chapter 1 Technical Data and Charts 11 20/138SL K4 Capacity Chart IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 20/138SL K4 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulaci ón de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. LB KG 48' (14.63m) 42' (12.80m) 36' (10.97m) 30' (9.14m) 24' (7.32m) 18' (5.49m) 12' (3.66m) ' (1.83m) 0 CENTERLINE ' 6' 9' 12' 15' 18' 21' 24' 27' 30' 33' (0.91m) (2.74m) (4.57m) (6.40m) (8.23m) (10.06m) 36' (1.83m) (3.66m) (5.49m) (7.32m) (9.14m) (10.97m) 39' (11.89m) 0 MOUNTING SURFACE
14 12 20/138SL Technical Specifications Manual # /138SL K5 Capacity Chart IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 20/138SL K5 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulaci ón de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. LB KG 54' (16.46m) 48' (14.63m) 42' (12.80m) 36' (10.97m) 30' (9.14m) 24' (7.32m) 18' (5.49m) 12' (3.66m) 0 CENTERLINE ' ' 9' 12' ' 18' ' 24' ' 30' ' (0.91m) (2.74m) (4.57m) (6.40m) (8.23m) (10.06m) 36' (1.83m) (3.66m) (5.49m) (7.32m) (9.14m) (10.97m) ' (11.89m) 42' (12.80m) 45' ' (14.63m) (13.72m) 6' (1.83m) 0 MOUNTING SURFACE
15 Chapter 1 Technical Data and Charts 13 20/138SL K6 Capacity Chart IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 20/138SL K6 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulaci ón de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal LB KG 60' (18.29m) 54' (16.46m) 48' (14.63m) 42' (12.80m) 36' (10.97m) 30' (9.14m) 24' (7.32m) 18' (5.49m) 12' (3.66m) 0 CENTERLINE ' ' 9' ' 15' 18' ' 24' ' 30' ' (0.91m) (2.74m) (4.57m) (6.40m) (8.23m) (10.06m) 36' (1.83m) (3.66m) (5.49m) (7.32m) (9.14m) (10.97m) (12.80m) 39' ' 48' (14.63m) 45' ' (16.46m) 51' (11.89m) (13.72m) (15.54m) ' (1.83m) 0 MOUNTING SURFACE
16 14 20/138SL Technical Specifications Manual # /138SL K7 Capacity Chart IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 20/138SL K7 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulaci ón de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal LB KG 66' (20.12m) 60' (18.29m) 54' (16.46m) 48' (14.63m) 42' (12.80m) 36' (10.97m) 30' (9.14m) 24' (7.32m) 18' (5.49m) 12' (3.66m) 0 CENTERLINE ' ' 9' 12' ' 18' ' 24' ' 30' (1.83m) (3.66m) (5.49m) (7.32m) (9.14m) (10.97m)(12.80m)(14.63m)(16.46m)(18.29m) 33' (0.91m) (2.74m) (4.57m) (6.40m) (8.23m) (10.06m)(11.89m)(13.72m)(15.54m)(17.37m)(19.20m) 36' 39' ' 45' ' 51' ' 57' 60' ' 6' (1.83m) 0 MOUNTING SURFACE
17 Chapter 1 Technical Data and Charts 15 20/138SL K8 Capacity Chart IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 20/138SL K8 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulaci ón de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. LB KG 78' (23.77m) 72' (21.95m) 66' (20.12m) ' (18.29m) 54' (16.46m) 48' (14.63m) 42' (12.80m) 36' (10.97m) 30' (9.14m) ' (7.32m) 18' (5.49m) 12' (3.66m) 6' (1.83m) 0 MOUNTING SURFACE 0 6' 12' 18' 24' 30' 36' 42' 48' 54' 60' 66' CENTERLINE (1.83m) (3.66m) (5.49m) (7.32m) (9.14m) (10.97m) (12.80m) (14.63m) (16.46m) (18.29m) (20.12m) 3' 9' 15' 21' 27' 33' 39' 45' 51' 57' 63' 69' (0.91m) (2.74m) (4.57m) (6.40m) (8.23m) (10.06m) (11.89m) (13.72m) (15.54m) (17.37m) (19.20m) (20.03m)
18 16 20/138SL Technical Specifications Manual # /138SL Geometric Configuration A A TOP CHASSIS A-A 2.9" (73 mm) 15' 6" (4731 mm) TOP CHASSIS TOP CHASSIS 11.4" (290 mm) 4' 1" (1250 mm) CL CHASSIS 7' 8" (2325 mm) 8' 2" (2500 mm) Standard:18' 3" (5575 mm) Option: 21' 2" (6455 mm) 2' 11" (880 mm) 3' 3" (1000 mm) 1' 4" (403 mm)
19 Chapter 1 Technical Data and Charts 17 Stabilizer Dimensions, Fixed Legs, 18 tm up 11.4" (290 mm) CL CHASSIS TOP CHASSIS STANDARD (Hydraulic Out / Hydraulic Down) 5' 4" (1625 mm) 7' 8" (2325 mm) 18' 3" (5575 mm) 5' 4" (1625 mm) 6' 9" (2065 mm) CL CHASSIS 11.4" (290 mm) 7' 8" (2325 mm) 21' 2" (6455 mm) TOP CHASSIS 6' 9" (2065 mm) OPTION 1 (Extra Wide Hydraulic Out / Hydraulic Down) A 2' 3" 2' 6" 2' 11" 3' 2" (677 mm) (777 mm) (877 mm) (977 mm) B 1' 5" 1' 8" 1' 8" 1' 8" (440 mm) (515 mm) (515 mm) (515 mm) Stabilizer Cylinder 26.6" (675) TOP CHASSIS 17" (435) 18' 3" (5575) / 21' 2" (6455 mm) 14.6" (372) 14.9" (378) 12.1" (308) 8.2" (208)
20 18 20/138SL Technical Specifications Manual # Stabilizer Dimensions, Swing-up, 18 tm up TOP CHASSIS 2.5" (63 mm) 1.7" (44 mm) 2.5" (64 mm) 16" (412 mm) 5' 4" (1625 mm) CLCHASSIS 11.4" (290 mm) TOP CHASSIS 16" (412 mm) 7' 7" (2320 mm) 5' 4" (1625 mm) 18' 3" (5570 mm) SWING UP STABILIZERS (EXTRA WIDE) 16" (412 mm) CL CHASSIS 11.4" (290 mm) 16" (412 mm) TOP CHASSIS 6' 9" (2065 mm) 7' 7" (2320 mm) 21' 2" (6450 mm) 6' 9" (2065 mm) SWING UP OPTION 1 STABILIZERS (EXTRA WIDE) A B 35" (879 mm) 30.5" (777 mm) 39" (979 mm) 42.5" (1079 mm) 34.4" (877 mm) 38.4" (977 mm)
21 Chapter 1 Technical Data and Charts 19 Stowed Dimensions 7' 10" (2379) TOP CHASSIS 15 8' 2" (2499) TOP CHASSIS 4' 5" (1356) 7' 2" (2175)
22 20 20/138SL Technical Specifications Manual # Mounting Dimensions MOUNTING KIT 8 x M24x2 BOLTS 5.5" (140) CLCHASSIS 2'-6" (750) 1'-3" (378) Min.22.9" (582) Max. 41.7" (1060) 2 ø1" (26) 7.3" (185) 3.1" (80) Max.6.3" (160) Max.1.25" (32) Max.1.25" (32) " (40) MOUNTING KIT 3 x M33x2 BOLTS + 1 M30x2 BOLT M30x2 2'-6" (750) 1'-3" (378) (1.6") (42) 1 (1.6") (42) Min. 35.5" (900) / Max. 41" (1040) NOTES (SEE REFERENCE NUMBER IN BOX): 1 VALUES DICTATED BY STRENGTH CONSIDERATIONS. 2 DRILL HOLE WHEN ASSEMBLING. 3 SEE INSTALLATION MANUAL # REGARDING INSTALLATION. 4 MOUNTING KIT AND REPLACEMENT PART NUMBERS ARE IN THE CRANE PARTS MANUALS.
23 Chapter 1 Technical Data and Charts 21 20/138SL Swing Clearance R - 25" (635 mm) R " (475 mm) R " (400 mm) 11 R - 16" (405 mm) TOP CHASSIS
24
25 23 C HAPTER 2 Hydraulic Schematics In This Chapter Hydraulic Diagram - 20/138SL Danfoss 6-Function Radio...24 Hydraulic Diagram - 20/138SL Danfoss 7-Function Radio...25 Hydraulic Diagram - 20/138SL Hydrocontrol 6-Function Manual...26 Hydraulic Diagram - 20/138SL Hydrocontrol 6-Function Radio...27
26 24 20/138SL Technical Specifications Manual # Hydraulic Diagram - 20/138SL Danfoss 6- Function Radio This diagram applies to a 20/138SL crane with a single-circuit fixed pump, and 6-function Danfoss radio controls. X1 C2 C1 X2 X3 M1 C2 M2 M C1 X4 V2 V1 V2 V1 M3 B1 M2 B P st P HPCO PVSK M1 A1 A B6 A B5 A B4 A4 B3 A3 B2 A2 B1 A B A1 Option T st P PVP T LS M 63093/63302/63304/63319 A1 B1
27 Chapter 2 Hydraulic Schematics 25 Hydraulic Diagram - 20/138SL Danfoss 7- Function Radio This diagram applies to a 20/138SL crane with a single-circuit fixed pump, and 7-function Danfoss radio controls. C2 C1 C2 C1 M1 C2 M2 M C1 V2 V1 V2 V1 V2 V1 V1 V2 D X1 X2 X3 X4 C2 C4 C2 C4 C1 C3 C1 C3 P PVSK P1 P2 P1 P2 P st M1 C2 M2 M C1 Fly-jib EXV: X3 X B7 A7 B6 V2 V1 X1 X2 A6 B5 M3 M2 M1 A1 B1 B A A5 B4 A4 B3 A B2 A2 B1 A B A1 Option T st P T PVP LS M / A1 B1
28 26 20/138SL Technical Specifications Manual # Hydraulic Diagram - 20/138SL Hydrocontrol 6- Function Manual This diagram applies to a 20/138SL crane with a single-circuit fixed pump, and 6-function Hydrocontrol manual controls. X1 C2 C1 X2 X3 M1 C2 M2 M C1 X4 V2 V1 V2 V1 M3 M2 B1 B M1 A1 A Pst HPCO B6 A6 B5 A B4 A4 A1 B1 B3 A3 A B B2 A2 T st B1 A1 Option T P Q-MODUL M1 M V M / / / / / / / / P T
29 Chapter 2 Hydraulic Schematics 27 Hydraulic Diagram - 20/138SL Hydrocontrol 6- Function Radio This diagram applies to a 20/138SL crane with a single-circuit fixed pump, and 6-function Hydrocontrol radio controls. X1 C2 C1 X2 X3 M1 C2 M2 M C1 X4 V2 V1 V2 V1 M3 B1 M2 B Pst HPCO M1 A1 A B6 A B5 A B4 A4 A1 B1 B3 A3 A B B2 A2 T st B1 A1 T Q-MODUL P T P Option M / / M1 M V P T Max 3 bar
10/72 Technical Specifications
Manual # 99905403 10/72 Technical Specifications Revision Date 20120202 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX: 641-923-2424 Website: http://www.imt.com Copyright
More information47/326 Technical Specifications
Manual # 9994953 47/326 Technical Specifications Revision Date 2111214 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 5438 Tel: 641-923-3711 FAX: 641-923-2424 Website: http://www.imt.com Copyright 211
More information810k / 910k Technical Specifications
IOWA MOLD TOOLING CO., INC. P.O. Box 189 Garner, IA 50438 Tel: 641.923.3711 Fax: 641.923.2424 www.imt.com Manual # 99906164 810k / 910k Technical Specifications Revised: March 14, 2017 Copyright 2017 Iowa
More informationMATERIAL HANDLING SYSTEMS CRANE SPECIFICATIONS & OPERATION MANUAL
OPERATION : 99903422: 20120920 PAGE - 1 MATERIAL HANDLING SYSTEMS CRANE SPECIFICATIONS & OPERATION MANUAL MODELS 0.5/4, 1.5/10, 2.0/15T, 2.6/19T IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189
More information17/117. Articulating Crane. Courtesy of Crane.Market
17/117 rticulating Crane 17/117 rticulating Crane Standard Features Specifications IMT 17/117 articulating cranes provide premium performance on the job site. With a max lifting capacity of 12,785 (58
More informationModel 7/51. Instruction Manual
99903276: IM-7/51: 20111201 PAGE 1 Model 7/51 Instruction Manual NOTE Read and understand this manual, the IMT Operators Crane Safety Manual and Safety Manual Supplement before operating or maintaining
More informationModel 3.1/22 Crane. Manual # Revision Date
Manual # 99903549 Model 3.1/22 Crane Revision Date 20030601 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX: 641-923-2424 Website: http://www.imt.com Copyright 2003 Iowa Mold
More informationModel 9/63. Instruction Manual
99903278 : IM-9/63: PAGE 1: 20111201 Model 9/63 Instruction Manual NOTE Read and understand this manual, the IMT Operators Crane Safety Manual and Safety Manual Supplement before operating or maintaining
More informationModel 5/35. Instruction Manual
99903044: IM-5/35: PAGE 1: 20111201 Model 5/35 Instruction Manual NOTE Read and understand this manual, the IMT Operators Crane Safety Manual and Safety Manual Supplement before operating or maintaining
More informationRefuse Container with Loader Manual
Part # 99904934 Refuse Container with Loader Manual Operation, Safety, Spare Parts From S/N Refuse3101055 (Revised 20120105) IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX:
More informationBT 3063 BOOM TRUCK CRANE DATASHEET - IMPERIAL. Features
BOOM TRUCK CRANE DATASHEET - IMPERIAL Features 15 t @ 5 ft capacity at rated distance from center of rotation 63 ft maximum boom length 73 ft maximum sheave height 24/40 ft optional jib 113 ft maximum
More informationModel 11/76. Instruction Manual
99903048: IM-11/76: PAGE 1: 20111201 Model 11/76 Instruction Manual NOTE Read and understand this manual, the IMT Operators Crane Safety Manual and Safety Manual Supplement before operating or maintaining
More informationHydraulic Loaders , and Courtesy of Crane.Market
Hydraulic Loaders, 24562 and 28562 Hydraulic Loaders When your application demands precise handling and placement of palletized material even in tight places look to the IMT family of hydraulic loaders.
More informationGIUFFRE.1 BT 3870 GIUFFRE BROS CRANES INC. BT To learn more about this model, call or visit giuffre.com today!
19 US t Lifting Capacity Boom Truck Cranes Datasheet Imperial Features: 19 US t @ ft capacity at rated distance from center of rotation 70 ft maximum boom length 80 ft maximum tip height Optional single
More informationRefuse Container with Loader Manual
Part # 99904801 Refuse Container with Loader Manual Operation, Safety, Spare Parts Revised 20111207 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX: 641-923-2424 Website:
More informationLINK-BELT LARGE TELESCOPIC BOOM CRANE SWING CAB (TLL)
LOAD CHARTS for Use in CCO Written Examinations LINK-BELT LARGE TELESCOPIC BOOM CRANE SWING CAB (TLL) This load chart has been adapted from the original manufacturer s load chart for use in CCO written
More informationCM170 TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Load Chart: Main Boom & Jib...6 LMI Codes...7
More informationCourtesy of Crane.Market
CM19 TELESCOPIC CRANE PRELIMINARY CONTENTS / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Crane Features...4 Boom Diagram...5 Load
More informationPRELIMINARY CONTENTS CM190 TELESCOPIC CRANE
CM190 TELESCOPIC CRANE PRELIMINARY CONTENTS /////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Load Chart: Main Boom & Jib...6 LMI Codes...7 Reeving Diagram...7
More informationPRELIMINARY CROSSOVER T capacity class Boom Truck Crane Datasheet imperial. View thousands of Crane Specifications on FreeCraneSpecs.
80T capacity class Boom Truck Crane Datasheet imperial PRELIMINARY Features 80 ton rated capacity @ 10 ft from center of rotation 126 ft maximum boom length 135 ft maximum tip height 33/57 ft optional
More informationCROSSOVER 8000 CROSSOVER T capacity class Boom Truck Crane Datasheet imperial. Features
80T capacity class Boom Truck Crane Datasheet imperial PRE AR N I M LI Y Features 80 ton rated capacity @ 10 ft from center of rotation 126 ft maximum boom length 135 ft maximum tip height 33/57 ft optional
More informationwide in travel mode 31 ft Tip Height 37 ft with Jib Wireless Radio Remote Control 5,800 lbs Capacity
24 wide in travel mode Wireless Radio Remote Control 31 ft Tip Height 37 ft with Jib 5,800 lbs Capacity URW205 in Action LOAD CHART Lifting capacity varies depending on outrigger configuration and boom
More informationRTH5.18. Maximum lifting height: 17,56 m Maximum reach: 14,26 m Engine: Mercedes 95 KW
Maximum lifting height: 7,56 m Maximum reach: 4,26 m Engine: Mercedes 95 KW Maximum lifting height: 57.6 ft Maximum reach: 46.8 ft Engine: Mercedes 29 HP Electronically controlled hydrostatic transmission
More informationBT 4792 RM 4792 RM US t Lifting Capacity Boom Truck Cranes Datasheet Imperial. Features:
BT 4792 RM 4792 23.5 US t Lifting Capacity Boom Truck Cranes Datasheet Imperial BT 4792 RM 4792 Model: BT 4792 Features: 23.5 US t @ 5 ft capacity at rated distance from center of rotation 92 ft maximum
More informationBT 4792 RM 4792 BT 4792 RM US t Lifting Capacity Boom Truck Cranes Datasheet Imperial. Features:
BT 4792 RM 4792 23.5 US t Lifting Capacity Boom Truck Cranes Datasheet Imperial BT 4792 RM 4792 Model: BT 4792 Features: 23.5 US t @ 5 ft capacity at rated distance from center of rotation 92 ft maximum
More informationCONTENTS TC700 SERIES TELESCOPIC CRANE
TC700 SERIES TELESCOPIC CRANE CONTENTS //////////////////////////////////////////////////////////////////// Crane Features... 4 Range Diagram... 5 Load Chart: Main Boom... 6 Load Chart: Main Boom... 7
More informationModel 20/141 Instruction Manual
99903216: IM-20/141: PAGE 1: 20120305 Model 20/141 Instruction Manual NOTE Read and understand this manual, the IMT Operators Crane Safety Manual and Safety Manual Supplement before operating or maintaining
More informationBT 3870 BOOM TRUCK CRANE BT Features:
BOOM TRUCK CRANE Data Sheet - Imperial Features: Capacity at rated distance from center of rotation: 19 T @ 5 ft Maximum boom length: 70 ft Maximum tip height: 80 ft Optional Single Stage 24 ft or 24-40
More informationCONTENTS TC500 SERIES TELESCOPIC CRANE
TC500 SERIES TELESCOPIC CRANE CONTENTS /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 5096S Chassis Data - S Models...
More informationCONTENTS TM200 TELESCOPIC CRANE
TM200 TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Chart: Main Boom & Jib...6 LMI Codes...7 Reeving
More informationRepair Parts Model 0.5/4 Crane
MODEL 0.5/4 : 99903420: 20111129 PAGE - 1 MATERIAL HANDLING SYSTEMS Repair Parts Model 0.5/4 Crane IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711 MANUAL PART NO: 99903420 Iowa
More informationTo learn more about this model, call or visit giuffre.com today! GIUFFRE.COM
TC300 SERIES TELESCOPIC CRANE 2 CONTENTS //////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Chassis Data... 5 Outrigger Extension... 6 Sub Frame...6
More informationbt USt Lifting Capacity Boom Truck Cranes Datasheet Imperial View thousands of Crane Specifications on FreeCraneSpecs.
28 USt Lifting Capacity Boom Truck Cranes Datasheet Imperial bt 28106 Features 28 USt @ 6 ft capacity at rated distance from center of rotation 106 ft maximum boom length 115 ft maximum tip height 30/47
More informationCROSSOVER 4500L. 45T capacity class Boom Truck Crane Datasheet imperial. View thousands of Crane Specifications on FreeCraneSpecs.com.
45T capacity class Boom Truck Crane Datasheet imperial Features 45 ton rated capacity @ 9 ft from center of rotation 129 ft maximum boom length 136 ft maximum tip height 32/49 ft optional jib 183 ft maximum
More informationBT 3870 BT US t Lifting Capacity Boom Truck Cranes Datasheet Imperial. Features:
19 US t Liing Capacity Boom Truck Cranes Datasheet Imperial S model Features: 19 US t @ capacity at rated distance from center of rotation maximum boom length 0 maximum tip height Optional single stage
More informationCONTENTS CM300.1 SERIES TELESCOPIC CRANE
CM300.1 SERIES TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features... 4 3051T Chassis... 5 30100C Chassis... 6 Outrigger Extension...
More informationPSC 8629 HYDRAULIC SERVICE CRANE SUPERIOR LIFTING SYSTEM LIFETIME EXCELLENCE. DISCLOSURE: Image does not show the standard shipping package.
PSC 8629 HYDRAULIC SERVICE CRANE LIFETIME EXCELLENCE SUPERIOR LIFTING SYSTEM DISCLOSURE: Image does not show the standard shipping package. STANDARD FEATURES WINCH Planetary winch for speed and durability.
More informationRTH5.21. Maximum lifting height: 20,70 m Maximum reach: 17,20 m Engine: Mercedes 95 KW
Maximum lifting height: 20,70 m Maximum reach: 17,20 m Engine: Mercedes 95 KW Maximum lifting height: 67.9 ft Maximum reach: 56.43 ft Engine: Mercedes 129 HP Electronically controlled hydrostatic transmission
More informationCROSSOVER T capacity class Boom truck crane Datasheet imperial
80T capacity class Boom truck crane Datasheet imperial Features 80 ton rated capacity @ 10 ft from center of rotation 126 ft maximum boom length 135 ft maximum tip height 33/57 ft optional jib 190 ft maximum
More informationCONTENTS TC500 SERIES TELESCOPIC CRANE
TC500 SERIES TELESCOPIC CRANE CONTENTS /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 5096S Chassis Data - S Models...
More informationManufacture. Discount to be applied to Price List 0% Installation of service crane -complete install cost $426.30
Vendor Name: Crysteel Truck Equipment Contact Person: Bob Brandenburg Street Address: 1130 73rd Ave. NE P.O. Box: City, State, Zip 55432 Phone #: 763-571-1902 Toll Free #: 800-795-1280 Fax #: 763-571-5091
More informationSpecifications & Parts Model 2.0/15 Crane
2.0/15T: 99904797: 20111213 PARTS-1 Specifications & Parts Model 2.0/15 Crane IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711 TECHNICAL SUPPORT FAX: 641-923-2424 MANUAL PART NUMBER:
More informationRT230XL RT 230 XL. Rough Terrain Crane Datasheet imperial. Features: Rated capacity: ft working radius. Maximum boom length: 100 ft
Rough Terrain Crane Datasheet imperial RT230XL Features: Rated capacity: 30 ton @ 10 ft working radius Maximum boom length: 100 ft Maximum tip height: 140 ft CONTENTS Key............................................................................................
More informationNational Crane Series 800H
National Crane Series 8H Data Sheet Features 3,48 m (1 ft) four-section boom 2,86 t (23 USt) rating Self-lubricating Easy Glide wear pads Dimensions 85 mm (31.69") 247 mm (94.") Maximum transport width
More informationTo learn more about this model, call or visit giuffre.com today! GIUFFRE.COM. 34,000 Ib ( kg) maximum lifting capacity
Boom Truck Crane TRUCK CRANE FEATURES 34,000 Ib (13 607 kg) maximum lifting capacity 80 (24.38 m) maximum sheave height 120 (36.57 m) maximum sheave height with 24-40 (7.31-12.19 m) jib 27-70 (82.30-21.34
More informationUPTime is the Manitex commitment to complete support of thousands of units working every day.
UPTime is the Manitex commitment to complete support of thousands of units working every day. MANITEX 3000 South Austin Avenue Georgetown, Texas 78626 1-877-314-3390 www.manitex.com MTX CM50 1 PC-EN-V1-1113
More informationRTH5.30. Maximum lifting height: 29,9 m Maximum reach: 25,85 m Engine: Mercedes 150 KW
Maximum liing height: 29,9 m Maximum reach: 25,85 m Engine: Mercedes 150 KW Maximum liing height: 98.1 Maximum reach: 84.81 Engine: Mercedes 204 HP Electronically controlled hydrostatic transmission Automatic
More informationCrane Installed on Cab & Chassis
Price quote for: Crane Installed on Cab & Chassis Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Aspen Equipment Company Mark Lundeen
More informationKEY. Hook block. Operator aids. Distance from hook to head sheave pin. Cab. Hook and ball. Heating / Air conditioning. Hydraulics.
KEY /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Operator aids Hook block Cab Distance from hook to head sheave pin Heating / Air conditioning
More informationBT 2047 BT US t Lifting Capacity Boom Truck Cranes Datasheet Imperial. Features: BT Features: BT 2047
BT 2047 BT 2057 10 US t Lifting Capacity Boom Truck Cranes Datasheet Imperial BT 2047 BT 2057 Model: BT 2047 Features: BT 2047 10 US t @ 5 ft capacity at rated distance from center of rotation 47 ft maximum
More informationBT 2047 BT 2057 BOOM TRUCK CRANE BT 2047 BT 2057 DATASHEET - IMPERIAL. Features: BT Features: BT 2057
BOOM TRUCK CRANE BT 2057 DATASHEET - IMPERIAL BT 2057 Model: Features: 10 t @ 5 ft capacity at rated distance from center of rotation 47 ft maximum boom length 56 ft 5 in maximum tip height 18 30 ft optional
More informationRT 345 XL. 45 USt Lifting Capacity Rough Terrain Crane Datasheet Imperial. Features:
USt Lifting Capacity Rough Terrain Crane Datasheet Imperial Features: Rated capacity: USt @ 9 ft working radius Maximum boom length: 5 ft Maximum tip height: 147 ft 1 CONTENTS Page: Key...3 Dimensions
More informationCROSSOVER Datasheet imperial. Boom Truck Crane 60T capacity class. Features
Boom Truck Crane T capacity class Datasheet imperial Features tons @ 10 capacity at rated distance from center of rotation 110 maximum boom length 115 maximum tip height 32/57 optional jib 1 maximum sheave
More informationCrane Installed on Cab & Chassis
Price quote for: Crane Installed on Cab & Chassis Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Aspen Equipment Company Mark Lundeen
More informationCROSSOVER T capacity class Boom truck crane Datasheet imperial
CROSSOVER 00 T capacity class Boom truck crane Datasheet imperial CROSSOVER 00 Features tons @ 10 capacity at rated distance from center of rotation 110 maximum boom length 118 maximum tip height 32/57
More informationTM 3851 TM USt Lifting Capacity Boom Truck Crane Datasheet Imperial. Features
19 USt Lifting Capacity Boom Truck Crane Datasheet Imperial Features 19 USt @ 5 ft capacity at rated distance from center of rotation 51 ft maximum boom length 61 ft maximum tip height 18/29 ft optional
More informationRT 670 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:
ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 70 ton @ 9 ft working radius Maximum boom length: 111 ft Maximum tip height: 170 ft CONTENTS Page: Key............................................................................................
More informationRT XL RT XL. 45 USt Lifting Capacity Rough Terrain Crane Datasheet Imperial. Features:
USt Lifting Capacity Rough Terrain Crane Datasheet Imperial Features: Rated capacity: USt @ 9 ft working radius Maximum boom length: 5 ft Maximum tip height: 147 ft 1 CONTENTS Page: Key............................................................................................
More information16000SIII Automatic Grease System
Manual # 99905495 16000SIII Automatic Grease System Effective 20120716 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX: 641-923-2424 Website: http://www.imt.com Copyright
More informationCONTENTS TC500 SERIES TELESCOPIC CRANE
TC500 SERIES TELESCOPIC CRANE CONTENTS /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 5096S Chassis Data - S Models...
More informationTADANO MODEL TM TON CAPACITY
LIFTING CHARTS - Trucks TADANO MODEL TM-35100-35 TON CAPACITY WORKING RANGE 25 45 5 160ʼ 150ʼ 140ʼ 79.5 7 6 100ft + 28.2ʼ jib 100ft + 50.0ʼ jib 5 45 4 35 3 86.2ft 100ft 130ʼ 120ʼ 110ʼ 100ʼ 90ʼ 80ʼ 70ʼ
More informationPSC 4025 ELECTRIC HYDRAULIC SERVICE CRANE SUPERIOR LIFTING SYSTEM LIFETIME EXCELLENCE. DISCLOSURE: Image does not show the standard shipping package.
PSC 4025 ELECTRIC HYDRAULIC SERVICE CRANE LIFETIME EXCELLENCE SUPERIOR LIFTING SYSTEM DISCLOSURE: Image does not show the standard shipping package. STANDARD FEATURES WINCH Planetary winch for speed and
More informationRT ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:
ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 55 ton @ ft working radius Maximum boom length: 1 ft Maximum tip height: 1 ft CONTENTS Page: Key............................................................................................
More information47,000 Ib ( kg) maximum lifting capacity. 101 (30.78 m) maximum sheave height. 144 (43.89 m) maximum sheave height with (
Boom Truck Crane TRUCK CRANE FEATURES 47,000 Ib (21 319 kg) maximum lifting capacity 101 (30.78 m) maximum sheave height 144 (43.89 m) maximum sheave height with 26-44 (7.92-13.41 m) jib 29-92 (8.84-28.04
More information600H Product Guide. Features. ASME B30.5 Imperial 85% Standard RCL System. 18,1 t (20 USt) rating
6H Product Guide ASME B3.5 Imperial 85% Features 18,1 t (2 USt) rating Five boom options available from 15 m (49 ft) to 27,42 m (9 ft) Multiple outrigger positions Standard RCL System Internal anti-two
More informationPSC 3216 SUPERIOR LIFTING SYSTEM ELECTRIC HYDRAULIC SERVICE CRANE LIFETIME EXCELLENCE. DISCLOSURE: Image does not show the standard shipping package.
PSC 3216 ELECTRIC HYDRAULIC SERVICE CRANE LIFETIME EXCELLENCE SUPERIOR LIFTING SYSTEM DISCLOSURE: Image does not show the standard shipping package. STANDARD FEATURES WINCH Planetary winch for speed and
More informationTo learn more about this model, call or visit giuffre.com today! GIUFFRE.COM
TC500 SERIES TELESCOPIC CRANE CONTENTS 2 /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 5096S Chassis Data - S Models...
More informationLifting Capacities Telescopic Boom All Terrain Crane ATC ton (118 metric ton) Link Belt
Lifting Capacities Telescopic Boom All Terrain Crane ATC 3130 130 ton (118 metric ton) Boom and fly capacities for this machine are listed by the following sections: Fully Extended Outriggers Working Range
More informationLIFTING CHARTS - Conventional Truck Cranes AMERICAN MODEL TON CAPACITY
LIFTING CHARTS - Conventional Truck Cranes AMERICAN MODEL - 125 TON CAPACITY 1 LIFT RATINGS With Tubular Hammerhead and "K-F-L-M" Counterweight (34,000 lbs.) Min 11 82.8-91090 250000 250000 47 10 12 81.3-87730
More informationHC 50. Hydraulic Crawler Crane. simple, available and cost effective FEATURES
HC 50 Hydraulic Crawler Crane FEATURES 50 tons (45.4 mt) max lift capacity 160 ft. (48.8 m) max lift crane boom length 130+40 ft. (39.6+12.2 m) max lift crane boom & jib length Power up/down and freefall
More informationRT USt Lifting Capacity Rough Terrain Crane Datasheet Imperial. Features:
55 USt Lifting Capacity Rough Terrain Crane Datasheet Imperial www.terexcranes.com Features: Rated capacity: 55 USt @ ft working radius Maximum boom length: 1 ft Maximum tip height: 1 ft 1 CONTENTS Page:
More informationLINK-BELT (Rough Terrain) LOAD CHART
For Use in CCO Written Examinations LINK-BELT (Rough Terrain) LOAD CHART TELESCOPIC BOOM CRANE SWING CAB (TLL) These charts have been adapted from the original manufacturer s charts for use in CCO Written
More informationCrane Safety Manual. Supplement
99903054: SM-MHS: PAGE 1: 20131212 Crane Safety Manual Supplement This manual is provided as a supplement to the IMT Operators Crane Safety Manual and is applicable to the following material handling crane
More informationLINK-BELT MODEL HTC TON CAPACITY RANGE DIAGRAM. LIFTING CHARTS - Hydraulic Truck Cranes
LIFTING CHARTS - Hydraulic Truck Cranes LINK-BELT MODEL HTC-840-40 TON CAPACITY RANGE DIAGRAM NOTE: and fly and jib geometry shown are for unloaded condition and machine standing level on firm supporting
More informationGIUFFRE.COM. National Crane 500E2 Series GIUFFRE BROS CRANES INC. Product Guide
National Crane 5E2 Series Product Guide Features 16,3 t (18 USt) rating 21,6 m (71 ft) three-section boom Self-lubricating Easy Glide wear pads Internal anti-two block Features National Crane Series 5E2
More informationIMT Bead Breaker 1000
Manual Part Number 99903638 IMT Bead Breaker 000 Revised 2050423 Copyright 204 Iowa Mold Tooling Co., Inc. All rights reserved IOWA MOLD TOOLING CO., INC. PO Box 89 Garner, IA 50438 Tel: 64-923-37 FAX:
More informationRT US t Lifting Capacity Rough Terrain Cranes Datasheet Imperial. View thousands of Crane Specifications on FreeCraneSpecs.com.
70 US t Lifting Capacity Rough Terrain Cranes Datasheet Imperial Features Rated capacity: 70 US t @ 9 ft working radius Maximum boom length: 111 ft Maximum tip height: 170 ft 07/26/12, Round 1 CONTENTS
More informationHC US tons lifting capacity Crawler crane Datasheet imperial
HC 2 HC 2 2 US tons liing capacity Crawler crane Datasheet imperial CONTENTS HC 2 Page: Highlights... 4 Specifications... 5 Dimensions... 67 59HI Offset Tip Boom Range Diagram... 8 Load Charts... 9 Notes
More informationRepair Parts Model 7/48 Crane
7/48: 99904681: 20111213 PARTS-1 Repair Parts Model 7/48 Crane IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711 MANUAL PART NUMBER: 99904681 Iowa Mold Tooling Co., Inc. is an Oshkosh
More informationTo learn more about this model, call or visit giuffre.com today! GIUFFRE.COM
2 TC400 SERIES TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 TC400 Chassis Data - S Models... 5 TC400 Chassis Data
More informationCONTENTS TC400 SERIES TELESCOPIC CRANE
TC400 SERIES TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 TC400 Chassis Data - S Models... 5 TC400 Chassis Data
More informationTELESCOPIC BOOM CRAWLER CRANE 45 TON CAPACITY
TELESCOPIC BOOM CRAWLER CRANE 9010 45 TON CAPACITY VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive steel fabrications with diesel
More informationTECHNICAL SPECIFICATIONS
40142 40142 SIDE VIEW DIAGRAM Maximum Vertical Reach 207'/63,1 m Working Area 360 Degrees Lifting Capacity 80,000 lbs/36 287 kg Boom Length 142 /43,3 m Crane Weight (Standard) 40,300 lbs/18 280 kg Jib
More informationIC-20-J. Tech Spec. Industrial Crane. Features the exclusive rotating boom
Tech Spec IC-20-J Industrial Crane Features the exclusive rotating boom Capacity on Outriggers... 5,000 lbs (2,270 kg) Pick and Carry Capacity... up to 2,500 lbs (1,130 kg) Height... 5 6 (1.66 m) w/o Operator
More information77 Ton Tele-Boom Crawler Crane. mantiscranes.com
15010 77 Ton Tele-Boom Crawler Crane mantiscranes.com VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive steel fabrications with diesel
More informationMT MANUAL # IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA Tel: FAX: Website:
MT MANUAL # IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX: 641-923-2424 Website: http://www.imt.com Copyright 201 Iowa Mold Tooling Co., Inc. All rights reserved. No part
More informationHeavy Duty Crawler Crane SC-50 HD
Heavy Duty Crawler Crane SC-50 HD LIFTING APPLICATION Operating weight (c/w 11 m boom and jib) 49000 kg 258822 lb TECHNICAL DATA SHEET Diesel engine Cummins QSB6.7 Cummins QSB6.7 - Max Rated Power 201
More informationDONGHAE MACHINERY & AVIATION Co., Ltd TECHNICAL SPECIFICATION MODEL SERIES
DONGHAE MACHINERY & AVIATION Co., Ltd TECHNICAL SPECIFICATION MODEL - 433 SERIES Model Series Revision 05 Date May 16, 2012 2 1. Terminology Diagram/L No. Description No. Description 1 Unit (Including
More informationT T XL. T / T XL 40 USt Lifting Capacity Truck Crane Datasheet Imperial. Features: T Features: T XL
T 340-1 / T 340-1 XL 40 USt Liing Capacity Truck Crane Datasheet Imperial T 340-1 T 340-1 XL Features: T 340-1 40 USt maximum liing capacity 94 maximum boom length 99 maximum tip height Engine power 0
More informationCD225 CAB DOWN CRANE CD225 DATASHEET - IMPERIAL. View thousands of Crane Specifications on FreeCraneSpecs.com. Features:
CAB DOWN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 25 ton @ 10 ft working radius Maximum boom length: 72 ft Maximum tip height: 121 ft CONTENTS Key............................................................................................
More informationIMT 3203i Technical Specifications & Parts
Manual # 99904380 IMT 3203i Technical Specifications & Parts Revision Date 2050707 IOWA MOLD TOOLING CO., INC. PO Box 89 Garner, IA 50438 Tel: 64-923-37 FAX: 64-923-2424 Website: http://www.imt.com Copyright
More informationTELESCOPIC BOOM CRAWLER CRANE 30 TON CAPACITY
TELESCOPIC BOOM CRAWLER CRANE 6010 30 TON CAPACITY OPTIONAL EQUIPMENT ACCESS WALKWAYS VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive
More informationCONTENTS TC500 SERIES TELESCOPIC CRANE
CONTENTS /////////////////////////////////////////////////////////////////////////////////////////////////////////////// KEY ///////////////////////////////////////////////////////////////////////////////////////////////////////////////
More informationT 500 SERIES. Truck Cranes. simple, available and cost effective FEATURES
T 500 SERIES Truck Cranes FEATURES 50 ton (45 mt) maximum lifting capacity 110 ft. (33.5 m) maximum boom length 169 ft. (51.5 m) maximum tip height Four-section full power, mechanically synchronized boom
More information400B Product Guide. Features. ASME B30.5 Imperial 85% 9,1 t (10 USt) rating. Multiple mounting configurations. 17,1 m (56 ft) three-section boom
4B Product Guide ASME B3.5 Imperial 85% Features 9,1 t (1 USt) rating 17,1 m (56 ft) three-section boom Multiple mounting configurations Internal anti-two block NATIONAL CRANE 4B The 4B Series delivers
More information14000 Series Crane & Model (Metric Version)
14000/19140:99900943: 19980826 14000 Series Crane & Model 19140 (Metric Version) Volume 2 - PARTS AND SPECIFICATIONS Section 1 SPECIFICATIONS-14000 SERIES Section 1A. SPECIFICATIONS-19140 CRANE Section
More informationXCMG QY60K. Construction machine brochure. Max. total rated lifting load. Full extended boom lifting height + jib. 58m
Construction machine brochure Max. total rated lifting Full- extend boom lifting height Full extended boom lifting height + jib 60t 42m 58m Crane model series: All-terrain Truck crane Crawler crane Next
More informationLINK-BELT. These charts are not to be used for any other purpose. LOAD CHARTS for Use in CCO Written Examinations
LOAD CHARTS for Use in CCO Written Examinations LINK-BELT TELESCOPIC BOOM CRANE SWING CAB (TLL) These charts have been adapted from the original manufacturer s charts for use in NCCCO Written Examinations.
More information10010Mx 50 Ton Telescopic Boom Crawler Crane
GENERAL DATA CRANE CAPACITY BOOM 50 ton at 10 feet (45t at 3.0m) 4-section, 37 6 111 6 (11.4 m 34 m) DIMENSION Overall Length 47 4 (14.43 m) Overall Width (tracks extended) 18 4 (5.59 m) Overall Width
More informationOPERATING RADIUS/LIFTING HEIGHT CHART
LIFTING CHARTS - Rough Terrain Cranes TADANO MODEL - 50 TON CAPACITY OPERATING RADIUS/LIFTING HEIGHT CHART NOTE: Boom and jib geometry shown are for unloaded condition and machine standing level on firm
More information