Hydraulic Loaders , and Courtesy of Crane.Market

Size: px

Start display at page:

Download "Hydraulic Loaders , and Courtesy of Crane.Market"

Paul Bates
5 years ago
Views:

1 Hydraulic Loaders, and 28562

Hydraulic Loaders When your application demands precise handling and placement of palletized material even in tight places look to the IMT family of hydraulic loaders.

Loaders are available with an optional fully proportional radio remote control for increased productivity.

2 Hydraulic Loaders When your application demands precise handling and placement of palletized material even in tight places look to the IMT family of hydraulic loaders. IMT loaders have excellent lift capacity, extensive reach, precise maneuverability, and exceptional operator visibility. Loaders are available with an optional fully proportional radio remote control for increased productivity. Hydraulic Fork Assembly Top Seat and Hydraulic Fork Assembly A-Frame Stabilizer ( only) Specifications Crane Rating 160,000 ft- (22.1 tm) 131,655 ft- (18.2 tm) 161,490 ft- (22.3 tm) Horizontal Reach 42' (12.8 m) 62' 3" (19 m) 62' 3" (19 m) Vertical Reach* 54' 1" (16.5 m) 71' 4" (21.8 m) 71' 4" (21.8 m) Max. Lift Capacity 5825 (2642 ) 5000 (2270 ) 5700 (2585 ) Lifting Height 54' 3" (16.5 m)** 75' 6" (23 m)*** 75' 6" (23 m)*** Hydraulic Extension 14.5" (4.4 m) 35' 4" (10.6 m) 35' 4" (10.6 m) *From mounting surface. **Based on 40" (101 cm) mounting height. ***Based on 50" (127 cm) mounting height.

3 Capacity Chart 54' 3" (16.53 m) 6' 11" (2108 mm) 47' 1" (14.35 m) 5' 10" (1778 mm) 54' 1" (16,485 mm) ' 11" (12.17 m) 4' 8" (1422 mm) 39' 9" (12,116 mm) 46' 11" (14,300 mm) 3' 4" (1016 mm) 7' 10" (2388 mm) 17' (5182 mm) 1' 7" (483 mm) 11" (279 mm) ' 2' 9" (838 mm) 17' 6" (5334 mm) 11' 7" (3.53 m) 1 6" (5639 mm) 13' 2" (4013 mm) 11' 6" (3505 mm) 40" (1.02 m) FRAME HT. 3' 4" (1016 mm) 0-5' (-1.52 m) 27' 6" (8382 mm) 34' 9" (10,592 mm) 42' (12,802 mm) 0' 4' (1.22 m) 12' (3.66 m) 20' (6.1 m) 24" 27' 6" (8.38 m) 34' 9" (10.59 m) 40' (12.19 m) 42' (12.8 m) Capacity Chart 72' (21.95 m) 3' 4" (1035 mm) SLEW AXIS 27' 6" (8430 mm) ' (19.51 m) 56' (17.07 m) CENTERLINE PARKING CONSOLE 7' 5" (2280 mm) 9' 8" (3000 mm) 6' 3" (1923 mm) 7' 3" (2215 mm) 4 (14.63 m) MOUNTING LEVEL 40' (12.19 m) 2' 1" (655 mm) 1' 8" (555 mm) 3' 6" (1108 mm) 29' 3" (8919 mm) 27' 4" (8366 mm) ' 10" (1210 mm) 7' 9" (2420 mm) 4' 6" (1361 mm) 1' 1" (320 mm) 6.5" (165 mm) -CHASSIS 8.7" (221 mm) ' 10" (6700 mm) 1' (310 mm) 1' 6" (465 mm) 1' 11.7" (310 mm) (297 mm) 0' 4' (1.22 m) 12' (3.66 m) 20' (6.1 m) 24' 2 (8.53 m) 40' 4 56' (12.19 m) (14.63 m) (17.07 m) 44' (13.41 m) 52' (15.85 m) 36' (10.97 m) 60' (18.29 m) 64' (19.51 m) -4' (-1.22 m) 2" (2496 mm) 2' 9" (825 mm) 7' 6" (2276 mm) 2" (2499 mm) 1' 5" 3' 8" (424 mm) (1107 mm) 3' 5" (1052 mm) 1' 9" (526 mm) 6' 1" (1849 mm)

4 28562 Capacity Chart 72' (21.95 m) SLEW AXIS 27' 6" (8430 mm) ' (19.51 m) 56' (17.07 m) CENTERLINE PARKING CONSOLE 7' 5" (2280 mm) 9' 8" (3000 mm) 4 (14.63 m) MOUNTING LEVEL 7' 3" (2215 mm) ' (12.19 m) 1' 8" (555 mm) 3' 6" (1108 mm) 29' 3" (8919 mm) 27' 4" (8366 mm) ' 10" (1210 mm) 7' 9" (2420 mm) 4' 6" (1361 mm) 1' 1" (320 mm) 6.5" (165 mm) -CHASSIS 8.7" (221 mm) MTG. SURFACE 21' 10" (6700 mm) 1' (310 mm) 1' 6" (465 mm) 1' 11.7" (310 mm) (297 mm) 0' 4' (1.22 m) 12' (3.66 m) 20' (6.1 m) 24' 2 (8.53 m) 40' 4 56' (12.19 m) (14.63 m) (17.07 m) 44' (13.41 m) 52' (15.85 m) 36' (10.97 m) 60' (18.29 m) -4' (-1.22 m) 2" (2496 mm) 2' 9" (825 mm) 7' 6" (2276 mm) 2" (2499 mm) 1' 5" 3' 8" (424 mm) (1107 mm) 3' 5" (1052 mm) 1' 9" (526 mm) 6' 1" (1849 mm) Power Source Standard integral-mounted piston hydraulic pump and PTO application Cylinder Holding Valves Integral-mounted counterbalance valves or loadholding check valves Prevention of sudden cylinder collapse in case of hose failure Rotation System 450 degree turntable bearing powered by hydraulic motor Heavy-duty gearbox equipped with a heat-treated pinion and degree rack and pinion Counterbalance valve on each cylinder to stop motion in case of hose failure Continuous oil bath to reduce friction and enhance life Hydraulic System Open-centered system (24562 only) Closed-centered system (28562 only) All functions, excluding stabilizers, are operated by joysticks and foot pedals ( only) All functions are radio remote operated with manual backup (24562 only) Controls are located at the base of the crane for stabilizer operation Standard hydraulic pressure filters Overload System Hydraulic pressure sensor blocks load-increasing functions when full capacity is attained and Electronic rated capacity limitation (RCL) 5300 blocks load-increasing functions when full capacity is attained

Operating Weight 10,500 (4762 ) 12,060 (5470 ) 11,468 (5202 ) Crane Storage Height 13' 2" (4 m) 13' 5" (4.09 m) 13' 5" (4.

8 tm) Rotation 450 420 420 Optimum Pump Capacity 16/16 gpm (60/60 L/min) 16/16 gpm (60/60 L/min) 26 gpm (100 L/min) 28562 Up to 62 (19 m) of horizontal reach Radio remote Oil cooler Oil Reservoir

5 Standard Features Up to 42' (12.8 m) of horizontal reach Top seat control Platform Oil cooler Up to 62 (19 m) of horizontal reach Radio remote Top seat with manual backup controls Oil cooler Specifications Operating Weight 10,500 (4762 ) 12,060 (5470 ) 11,468 (5202 ) Crane Storage Height 13' 2" (4 m) 13' 5" (4.09 m) 13' 5" (4.09 m) Mounting Space 36" (914 mm) 44" (1118 mm) 44" (1118 mm) Rotational Torque 30,910 ft- (4.2 tm) 35,008 ft- (4.8 tm) 35,008 ft- (4.8 tm) Rotation Optimum Pump Capacity 16/16 gpm (60/60 L/min) 16/16 gpm (60/60 L/min) 26 gpm (100 L/min) Up to 62 (19 m) of horizontal reach Radio remote Oil cooler Oil Reservoir Capacity Stabilizer Extension Span 40 gal (90 L) 55 gal (210 L) 55 gal (210 L) 17' 6" (5.3 m) (at ground level) 22' (6.7 mm) (hydraulic out/ hydraulic down) 22' (6.7 mm) (hydraulic out/ hydraulic down) Options only Fully proportional radio remote control High frame base Minimum Chassis Specifications Front Axle Rating (GAWR) 16,000 (7257 ) 18,000 (8165 ) 18,000 (8165 ) Rear Axle Rating (GAWR) 40,000 (18,144 ) 40,000 (18,144 ) 40,000 (18,144 ) Resistance to Bending Moment Minimum 3,300,000 in- (38,021 -m) 3,300,000 in- (38,021 -m) 3,300,000 in- (38,021 -m) A-Frame ( only) Power out and down (24562 and only) Stabilizers A sturdy design for excellent stability is ideal for loading and unloading palletized goods. Top Seat Control Controls operated by pilot operated joysticks and foot pedals from the top seat and platform allow operators to maneuver materials with great operator visibility. An optional radio remote control is available for those that choose to have both controls. ( only)

Powered by TCPDF (www.tcpdf.org) Nothing Says Commitment Like The Diamond.

6 Powered by TCPDF ( Nothing Says Commitment Like The Diamond. IMT has been meeting the needs of our customers for over 50 years and none of it would have been possible without a distributor network that s second to none. IMT distributors offer fast, knowledgeable service and the ability to help customers find the right product for every application. When you re looking for reliable equipment and dependable service, remember IMT. Iowa Mold Tooling Co., Inc. 500 Highway 18 West Garner, Iowa IMT reserves the right to make changes in engineering, design, and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. IMT, the IMT logo and NOTHING SAYS COMMITMENT LIKE THE DIAMOND are registered trademarks or trademarks of Iowa Mold Tooling Co., Inc., Garner, IA, USA Iowa Mold Tooling Co., Inc. All Rights Reserved. 02/14

HYDRAULIC LOADERS , and 42684

HYDRAULIC LOADERS , and 42684 HYDRAULIC LOADERS 16000, 28562 and 42684 2 3 INCREASE YOUR PRODUCTIVITY When your application demands precise handling and placement of palletized material even in tight places look to the IMT family of