ROUGH TERRAIN CARRIER

Transcription

1 ROUGH TERRAIN CARRIER 95B, 95B, & 595B TIER FINAL - SPECIFICATIONS The Rough Terrain Carrier (RTC) loader package is the most maneuverable and powerful log loading machine in the Barko lineup, providing increased productivity while maintaining a safe work environment. With a rigid frame design that provides a sharp turning radius and incredible pulling capacity, the RTC is ideal for navigating around log yards, sawmills and other tight jobsites.

2 PROPEL YOUR PRODUCTION The future of log handling has arrived with the Barko -wheel-drive RTC loader package. Featuring an incredibly stable rigid frame that provides -wheel, -wheel and crab steering capabilities, the RTC propels your loading to a whole new level of production. Engineered for maximum dependability and productivity, Barko s 595B, 95B and 95B RTC loader packages offer boom length options of 3, 3, 3 and feet. Tried-and-true Barko technology makes fast work of loading tasks, while the RTC s agility and impressive tractive effort get you around the jobsite quickly to save time and money.

3 SPECIFICATIONS 8 5 BOOM SWEEP 595B WITH 3' BOOM 595B ROUGH TERRAIN CARRIER DIMENSIONS Overall Height ' " (3 cm) Overall Loader Length 5' " (,38 cm) with 3' boom extended & 7, lbs counterweight 3 Ground Penetration 7" (78 mm) Ground Clearance 9" (8 cm) 5 Overall Width 9' " (3 cm) Stabilizer Width 5' " (85 cm) 7 Stabilizer Spread ' " (9 cm) 8 Tail Swing 9' 3" (8 cm) with 7, lbs counterweight 9 Wheel Base ' " (3 cm) Track 8' " (5 cm) Approx. Operating Weight 5, lbs (,8 kg) without attachment SWING SYSTEM Continuous on 5" (,37 mm) internal tooth Rotation/Swing Speed turntable bearing; 9 RPM, power transmitted through dual motors and planetary gearboxes Swing Torque 55, ft-lbf (7,57 Nm); % theoretical Braking Hydrostatic dynamic braking with 73, ft-lbf (98,975 Nm) braking swing torque Swing Brake Spring applied hydraulic release (SAHR); holding brake (optional) MAXIMUM LIFT CAPACITY 3 (. m) straight boom, less attachment. Radius Lift Radius Lift ' (3.7 m) 5,97 lbs (,78 kg) 5 (7. m) 7, lbs (7,89 kg) 5 (. m) 9, lbs (3,7 kg) 5 3 (9. m), lbs (, kg) 3 (. m),78 lbs (9,879 kg) 3 (. m) 7,79 lbs (3,533 kg) FEATURES & OPTIONS STANDARD FEATURES - ROUGH TERRAIN CARRIER Steel line along inside of frame Travel alarm 3/" hitch plate for pintle hitch mount STANDARD FEATURES - LOADERS All Models - Removable service panels Centralized turntable greasing system 595B / 95B - 7, lbs (3,75 kg) cast steel counterweight & oil 3' boom 95B - 3, lbs (,3 kg) cast steel counterweight & oil 3' boom OPTIONS & ACCESSORIES All Models - Bar slasher/delimber hydraulics package Boom lights Log & pulp grapples Grapple saw Detachable heel bar (standard/offset, single/double vee) 3" or " hydraulic tilt cab riser 3", 3", or 8" fixed cab riser Engine block heater Hydraulic tank heater Hydraulic thermal bypass Automatic greasing system -volt hydraulic transfer pump Alternate hand/foot control configurations (consult factory) 595B - 3' or 3' live heel boom 3', 3', or ' straight boom, lbs (,53 kg) counterweight 95B - 3' straight or live heel boom 95B - 3' straight or live heel boom *See complete listing of options at

4 SPECIFICATIONS 8 5 BOOM SWEEP 95B WITH 3' BOOM B ROUGH TERRAIN CARRIER DIMENSIONS Overall Height ' " (3 cm) Overall Loader Length ' " (, cm) with 3 boom extended & 7, lbs counterweight 3 Ground Penetration 7" (78 mm) Ground Clearance 9" (8 cm) 5 Overall Width 9' " (3 cm) Stabilizer Width 5' " (85 cm) 7 Stabilizer Spread ' " (9 cm) 8 Tail Swing 9' 3" (8 cm) with 7, lbs counterweight 9 Wheel Base ' " (3 cm) Track 8' " (5 cm) Approx. Operating Weight 8, lbs (,83 kg) without attachment SWING SYSTEM Continuous on " (,8 mm) internal tooth Rotation/Swing Speed turntable bearing; 9 RPM, power transmitted through dual motors and planetary gearboxes Swing Torque, ft-lbf (59,5 Nm); % theoretical Braking Hydrostatic dynamic braking with 59, ft-lbf (79,993 Nm) braking swing torque Swing Brake Spring applied hydraulic release (SAHR); holding brake (optional) MAXIMUM LIFT CAPACITY 3 (9.8 m) straight boom, less attachment. Radius Lift Radius Lift (3.7 m) 8,7 lbs (3,7 kg) 5 (7. m),99 lbs (5,89 kg) 5 (. m),9 lbs (9,9 kg) 5 3 (9. m) 9,8 lbs (,9 kg) 3 (. m),35 lbs (7, kg) 3 (9.8 m) 5,59 lbs (,535 kg) OPERATOR CAB 38.5" x 55" (978 x,397 mm) forward sloping pressurized cab with sound suppression insulation Heating & air conditioning AM/FM radio, CD player, CB radio Digital display: water temperature, voltage, engine oil pressure, fuel, hour meter, engine RPM, DEF gauge Load sense pressure Tinted windows: roof, sliding side, rear Pantograph windshield wipers, washer, dome light Adjustable suspension seat with armrests Dual joystick controls Dash console with easy access start/ stop controls and accessory switches Warning lights & monitor system Swing control operated by foot pedal Swing-out entry door Front cab guard () -volt DC power points () -volt DC halogen cab lights SAFETY Barko RTC loaders offer safety features that many units in a mill environment do not. Walk-up steps and a solid platform minimize the potential for slip-and-falls when entering the cab. Then while on the job, the RTC provides outstanding stability when loading or maneuvering.

5 SPECIFICATIONS 8 5 BOOM SWEEP 95B WITH 3' BOOM B ROUGH TERRAIN CARRIER DIMENSIONS Overall Height ' " (3 cm) Overall Loader Length 39' (,89 cm) with 3 boom extended & 3, lbs counterweight 3 Ground Penetration " (5 mm) Ground Clearance 9" (8 cm) 5 Overall Width 9' " (3 cm) Stabilizer Width 5' " ( cm) 7 Stabilizer Spread ' 3" (3 cm) 8 Tail Swing 8' " (9 cm) with 3, lbs counterweight 9 Wheel Base ' " (3 cm) Track 8' " (5 cm) Approx. Operating Weight,5 lbs (8,8 kg) without attachment SWING SYSTEM Continuous on 39" (99 mm) internal tooth Rotation/Swing Speed turntable bearing; 8 RPM, power transmitted through dual motors and planetary gearboxes Swing Torque 3, ft-lbf (,7 Nm); % theoretical Braking Hydrostatic dynamic braking with, ft-lbf (5,33 Nm) braking swing torque MAXIMUM LIFT CAPACITY 3 (9. m) straight boom, less attachment. Radius Lift Radius Lift (3. m) 9,9 lbs (9,5 kg) 5 (7. m), lbs (,5 kg) 5 (. m) 7,39 lbs (7,888 kg) 5 3 (9. m) 5, lbs (,58 kg) 3 (. m),9 lbs (5,8 kg) MANEUVERABILITY The RTC offers incredible maneuverability compared to other machines on the market. In fact, using -wheel steer, its 8-foot turning radius is sharper than many half-ton pickup trucks. With all wheels maintaining ground contact to provide proper support, the RTC can easily navigate your yard, swiftly moving from pile to pile to maximize operating efficiency. SPEED With the ability to travel up to miles per hour, the RTC won t drain your productivity every time you have to move across the yard. Additionally, the machine s power shift transmission allows it to shift on the fly. POWER The RTC packs power into every movement. Its extraordinary drawbar pull of approximately, pounds is enough to pull a small log trailer, easily move through mud, and even climb steep grades of up to 5-percent.

6 PERFORMANCE ROUGH TERRAIN CARRIER Maximum Speed. mph (9.3 km/h) high gear, 3. mph (5.5 km/h) low gear Tractive Effort 5, lbf (. kn) low gear,, lbf (7. kn) high gear Gradeability 5.% Brakes Primary: Hydrostatic dynamic braking mechanism; Secondary: Hydraulic disc brakes on all wheels, operated by foot pedal Park: Spring applied hydraulic release (SAHR) Axles Planetary drive axles front and rear; front oscillates (with hydraulic oscillation lock), rear rigid to frame Transmission -speed hydrostatic drive Steering Hydraulic -wheel steer; front axle controlled by joystick axis, rear axle controlled by buttons on joystick Turning Radius -wheel steer: 3' (,97 cm); -wheel steer: 8' (59 cm) Tires. x 5 pneumatic PERFORMANCE LOADERS 595B 95B 95B ENGINE Model/Power 73 HP (9 kw) Cummins QSB.7 Tier Final with SCR aftertreatment DEF Tank gal. (38 L) Fuel Tank gal. (5 L) HYDRAULICS Tank gal. ( L) with return line filter, shut-off valve on pump suction line Pump 9 GPM (5 LPM), variable displacement piston 88 GPM (333 LPM), variable displacement piston Operating Pressure 3, psi (8 bar) main system 3, psi ( bar) main system Features Heavy-wall tubing and multi-wire braided hose; quick disconnect diagnostic ports BOOM Structure All-welded construction with fabricated box type design; aluminum bronze bushings with grease grooves at boom pivot points Horizontal Reach 3 (975 cm) 3' (9 cm) Vertical Reach 38' " (,8 cm) 37' " (,3 cm) Maximum Lift Capacity 38,8 lbs (7,8 kg) 8,7 lbs (3,7 kg),8 lbs (,35 kg) Cylinders Features Hydraulic cylinders with wear rings on pistons and bolt-on glands; heavy-duty steel tubing; induction hardened rods with heavy chrome plating; spherical bearings at all pivots Main Boom 7" x 5" (78 x,95 mm) with " ( mm) rod " x 5" (5 x,95 mm) with 3.5" (89 mm) rod Stick Boom 7" x 35" (78 x 889 mm) with " ( mm) rod " x 35" (5 x 889 mm) with 3.5" (89 mm) rod * Specifications are subject to change. BARKO HYDRAULICS, LLC One Banks Ave. Superior, WI 588 P: info@barko.com WARRANTY WARRANTY Year Full machine Years Powertrain and major hydraulic components 3 Years Machine structure Copyright 7 Barko Hydraulics, LLC All rights reserved. Barko, the Barko B logo, and their related trademark designs and logotypes are trademarks and/or trade names of Barko Hydraulics, LLC. Cummins and its related trademark designs and logotypes are trademarks and/or trade names of the respective company. BR-ML rev. 7/7