G3-MS20 G3-MS40 G3-MS24 G3-MS51 G3-MS52 G3-MS53 G3-MS50 G3-MS80 AURA SERIES

Transcription

1 AURA SERIES G3-MS G3-MS5 G3-MS5 G3-MS53 G3-MS0 G3-MS0 G3-MS50 G3-MS80

2

3 IMPORTANT SAFETY INFORMATION It is the sole responsibility of the purchaser of MATRIX products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment. It is recommended that all users of MATRIX exercise equipment be informed of the following information prior to its use. Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that MATRIX equipment be used properly to avoid injury. INSTALLATION. STABLE AND LEVEL SURFACE: MATRIX exercise equipment must be installed on a stable base and properly leveled.. SECURING EQUIPMENT: Manufacturer recommends that all stationary MATRIX strength equipment be secured to the floor to stabilize equipment and eliminate rocking or tipping over. This must be performed by a licensed contractor. All anchor points must be able to withstand 750 lbs. (3.3 kn) pull-out force. MAINTENANCE. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by your country s local MATRIX dealer.. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important information. If unreadable or missing, contact your MATRIX dealer for a replacement. 3. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your liability to a minimum. Equipment needs to be inspected at regular intervals.. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. MATRIX dealers will provide service and maintenance training at our corporate facility upon request. ADDITIONAL NOTES This equipment should only be used in supervised areas where access and control is specifically regulated by the owner. It is up to the owner to determine who is allowed access to this training equipment. The owner should consider a user s: degree of reliability, age, experience, etc. This training equipment meets industry standards for stability when used for its intended purpose in accordance with the instructions provided by the manufacturer. This training equipment is in compliance with EN 957- and the relevant portions of EN 957- and EN WARNING NOT a stand-alone unit. MUST be connected to other units in a Matrix-approved configuration for added stability. WARNING DEATH OR SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. FOLLOW THESE PRECAUTIONS TO AVOID INJURY!. Keep children under the age of away from this strength training equipment. Teenagers must be supervised at all times while using this equipment.. This equipment is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the equipment by a person responsible for their safety. 3. All warnings and instructions should be read and proper instruction obtained prior to use. Use this equipment for its intended purpose ONLY.. Inspect the machine before use. DO NOT use machine if it appears damaged or inoperable. 5. Do not exceed weight capacity of this equipment. 6. Check to see that the selector pin is completely inserted into the weight stack. 7. NEVER use the machine with the weight stack pinned in an elevated position. 8. NEVER use dumbbells or other means to incrementally increase the weight resistance. Only use the means provided directly from the manufacturer. 9. Injuries to health may result from incorrect or excessive training. Cease exercise if you feel faint or dizzy. Obtain a medical exam before beginning an exercise program. 0. Keep body, clothing, hair, and fitness accessories free and clear of all moving parts.. Adjustable stops, where provided, must be used at all times.. When adjusting any adjustable mechanism (stop position, seat position, pad location, range of motion limiter, pulley carriage, or any other type), make certain that the adjustable mechanism is fully engaged prior to use to prevent unintended motion. 3. Manufacturer recommends that this equipment be secured to the floor to stabilize and eliminate rocking or tipping over. Use a licensed contractor.. If equipment is NOT secured to floor: NEVER allow resistance straps, ropes or other means to be attached to this equipment, as this may result in serious injury. NEVER use this equipment for support during stretching, as this may result in serious injury. 5. DO NOT REMOVE THIS LABEL. REPLACE IF DAMAGED OR ILLEGIBLE. General Selectorized 3

4 PROPER USAGE. Do not exceed weight limits of the exercise device.. If applicable, set safety stops to appropriate height. 3. If applicable, adjust seat pads, leg pads, foot pads, range of motion adjustment, or any other type of adjustment mechanisms to a comfortable start position. Make certain that the adjusting mechanism is fully engaged to prevent unintentional movement and to avoid injury.. Sit on bench (if applicable) and get into appropriate position for exercise. 5. Exercise using no more weight than you can safely lift and control. 6. In a controlled manner, perform exercise. 7. Return weight to its fully-supported start position. WARRANTY For North America, please visit for warranty information along with warranty exclusions and limitations. MAINTENANCE CHECKLIST ACTION Clean Upholstery * Inspect Cables Clean Guide Rods Inspect Hardware Inspect Frame Clean Machine Clean Grips * Lubricate Guide Rods FREQUENCY Daily Daily Monthly Monthly Bi-Annually As Needed As Needed As Needed * Upholstery & Grips should be cleaned with a mild soap and water or a nonammonia based cleaner. Guide rods should be lubricated with Teflon based lubricant. Apply the lubricant to a cotton cloth and then apply up and down the guide rods. PRODUCT SPECIFICATIONS G3-MS Adjustable Pulley G3-MS5 Lat Pulldown G3-MS5 Triceps Pressdown G3-MS53 Low Row G3-MS0 Adjustable Cable Crossover G3-MS0 -Stack Multi-station G3-MS50 5-Stack Multi-station G3-MS80 8-Stack Multi-station Max User Weight 36 kg / 300 lbs. Product Weight 90 kg / 98.5 lbs. 8 kg / 6 lbs kg / 77.5 lbs. 6 kg / 78 lbs. 399 kg / 880 lbs. 998 kg / 00 lbs. 97 kg / 60 lbs. 996 kg / 00 lbs. Overall Dimensions (L x W x H)* 68 x 70 x 0 cm / 7 x 8 x x 0 x 5 cm / 50 x 7.5 x x 59 x 0 cm / 33.5 x 3.5 x x 7 x 0 cm / 9 x 8 x x 90 x 39.6 cm / 56.5 x 35. x x x 5 cm / 66. x 5.6 x x x 5.7 cm / 89.6 x 5.6 x x 5.6 x 5.7 cm / x 57.3 x 99. Weight Stack 9 kg / 00 lbs. 3 kg / 95 lbs. 9 kg / 00 lbs. 3 kg / 95 lbs. x 9 kg / x 00 lbs. x 9 kg, x 3 kg / x 00 lbs., x 95 lbs. 3 x 9 kg, x 3 kg / 3 x 00 lbs., x 95 lbs. x 9 kg, x 3 kg / x 00 lbs., x 95 lbs. * Ensure a minimum clearance width of 0.6 meters ( ) for access to and passage around MATRIX strength equipment. Please note, 0.9 meters (36 ) is the ADA recommended clearance width for individuals in wheelchairs.

5 UNPACKING Thank you for purchasing a MATRIX Fitness product. It is inspected before it is packaged. It is shipped in multiple pieces to facilitate the compact packaging of the machine. Prior to assembly, confirm all the components by matching them with the exploded diagrams. Carefully unpack the unit from this box and dispose of the packing materials in accordance with your local laws. CAUTION To avoid injury to yourself and prevent damage to the frame components, be sure to have proper assistance removing the frame pieces from this box. Please be sure to install the equipment on a stable base, and properly level the machine. Ensure a minimum clearance width of 0.6 meters ( ) for access to and passage around MATRIX strength equipment. Please note, 0.9 meters (36 ) is the ADA recommended clearance width for individuals in wheelchairs. TOOLS REQUIRED FOR ASSEMBLY (not included) 3MM L-Shaped Allen Wrench 0MM L-Shaped Allen Wrench MM L-Shaped Allen Wrench Phillips Screwdriver 5MM L-Shaped Allen Wrench 8MM Open-End Wrench 6MM L-Shaped Allen Wrench 7MM Open-End Wrench 8MM L-Shaped Allen Wrench Guide Rod Lubrication If any items are missing please contact your country s local MATRIX dealer for assistance. 0 mm

6 G3-MS TECH SPECS Maximum Training Weight Product Weight 9 kg / 00 lbs. 90 kg / 99 lbs. Overall Dimensions (L x W x H)* 68 x 70 x 0 cm / 7 x 8 x 9.5 * Ensure a minimum clearance width of 9 mm / 36 for access to and passage around MATRIX strength equipment. MS DIMENSIONS 0.68 M 0.70 M (7 IN 8 IN) Triceps Adjustable Pulley TRAINING AREA 3. M (0.5 FT) Biceps FREE AREA 0.6 M ( FT) WIDE PATH 6

7 G3-MS F05 Z05 Z06 F0 Z0x8 Zx8 Z0x8 F0 Z0x F03 B5 F0 F0 F03 K9x Zx Zx K9x8 F0 F0 F03 Item Description Z0 Z0 Z0 Z05 Z06 Z Z Z3 B5 V03 F0 F0 F03 F0 F05 Z0 Z K9 Screw, Oval-Hex Socket (M0x00L) Arc-flat Washer Nylon Nut (M0) Screw, Oval-Hex Socket (Mx5L) Flat Washer (M) Screw, Oval-Hex Socket (M6x5L) Nylon Nut (M6) Rubber Stack Cushions Screw, Oval-Hex Socket (M8x30L) Sticker, Weight Stack Plate Pulley (5mm) Pulley (90 mm) Bolt, hex-head Nylon Nut (M0) Cable Rubber Tip Weight Shield Bolt Rubber Shield Screw, Oval-Hex Socket (M6x5L) Qty F0x F0x F03x Z0x V03 F0 F0 NOTE: Before attaching weight plate decals, be sure to verify the head plate is positioned on the weight stack so that the bolt attaching the pull pin to the head plate is positioned behind the chrome adjustment tube. Z05 Z06 F0 F03 Z3x F0 F03 7

8 G3-MS5 TECH SPECS Maximum Training Weight Product Weight 3 kg / 95 lbs. 8 kg / 6 lbs. Overall Dimensions (L x W x H)* 6 x 0 x 5 cm / 50 x 7.5 x 99.5 * Ensure a minimum clearance width of 9 mm / 36 for access to and passage around MATRIX strength equipment. MS5 TRAINING AREA Lat Pulldown.6 M (50 ). M (7.5 ) FREE AREA 0.6 M ( FT) WIDE PATH 8

9 G3-MS5 Z Z3 F3 F06 F F3 K9 F06 F F08 Z0 Z Z F3 F06 F Z0 Z0 Z8 Z8 Z07 F F06 F3 Item Description Z0 Z0 Z05 Z07 Z08 Z7 Z8 Z0 Z Z Z3 Z Z5 Z6 V03 F06 F08 F F3 K9 Screw, Round-Hex Socket (M8x30L) Screw, Round-Hex Socket (M0x00L) Flat Washer (M0) Nylon Nut (M0) Screw, Round-Hex Socket (M0x80L) Screw, Round-Hex Socket (M0x5L) Arc-flat Washer Screw, Round-Hex Socket (Mx5L) Flat Washer (M) Lock Washer (M) Screw, Round-Hex Socket (M6x5L) Nylon Nut (M6) Screw, Oval-Hex Socket (M0x35L) Rubber Stack Cushions Sticker, Weight Stack Plate Pulley Cable Bolt, hex-head Nylon Nut (M0) Screw, Round-Hex Socket (M6x5L) Qty Z7 Z8 Z08 Z8 Z0 V03 Z6 Z5 Z05 Z07 9

10 G3-MS5 TECH SPECS Maximum Training Weight Product Weight 9 kg / 00 lbs kg / 78 lbs. Overall Dimensions (L x W x H)* 85 x 59 x 0 cm / 33.5 x 3.5 x 9.5 * Ensure a minimum clearance width of 9 mm / 36 for access to and passage around MATRIX strength equipment. MS5 TRAINING AREA 0.85 M (33.5 ) FREE AREA 0.6 M ( FT) WIDE PATH Triceps Pressdown 0.59 M (3.5 ) 0

11 G3-MS5 F3 F06 F Z06 Z05 K9 Z0 Z09 Z07 Z07 F3 F06 F Z0 Guide Sleeve Item Description Qty Z0 Z0 Z05 Z06 Z07 Z09 Z0 Z V0 F06 F08 F F3 K9 Screw, Oval-Hex Socket (M8x30L) Screw, Oval-Hex Socket (M0x35L) Screw, Oval-Hex Socket (M6x5L) Nylon Nut (M0) Arc-flat Washer Screw, Oval-Hex Socket (M0x90L) Nylon Nut (M0) Rubber Stack Cushions Sticker, Weight Stack Plate Pulley Cable Bolt, hex-head Nylon Nut (M0) Screw, Oval-Hex Socket (M6x5L) F08 Z0 V0 Z

12 G3-MS53 TECH SPECS Maximum Training Weight Product Weight 3 kg / 95 lbs. 6 kg / 78 lbs. Overall Dimensions (L x W x H)* 30 x 7 x 0 cm / 9 x 8 x 9.5 * Ensure a minimum clearance width of 9 mm / 36 for access to and passage around MATRIX strength equipment. MS53 TRAINING AREA Low Row.9 M (5 ) FREE AREA 0.6 M ( FT) WIDE PATH 0.7 M (8 )

13 G3-MS53 Z06 Handlebar Holder Hooker F07 Z08 K8 Z07 Z0 F3 F05F F F3 F05F F05 Z05 F3 K9 Item Description Z0 Z0 Z05 Z06 Z07 Z08 Z09 Z0 Z Z3 Z Z6 V03 F05 F07 F F3 K8 K9 Screw, Oval-Hex Socket (M8x30L) Screw, Oval-Hex Socket (M0x35L) Screw, Oval-Hex Socket (M6x5L) Nylon Nut (M6) Screw, Oval-Hex Socket (M8x70L) Nylon Nut (M8) Nylon Nut (M0) Screw, Oval-Hex Socket (M0x5L) Flat Washer (M0) Screw, Oval-Hex Socket (M0x80L) Rubber Stack Cushions Arc-flat Washer Sticker, Weight Stack Plate Pulley Cable Bolt, hex-headv Nylon Nut (M0) Flat Washer (M8) Screw, Oval-Hex Socket (M6x5L) Qty F3 F05 F Z3 Z0 Z6 Z Z Z09 V03 F3 F05 F Z0 3

14 G3-MS0 Stack Sample Configuration Z6 Z0 Z6 Z0 Lat Pull G3-MS5 Adjustable Pulley G3-MS Tricep G3-MS5 Low Row G3-MS53 Frame Detail Item Description Qty Z0 Flat Washer (M8) Z6 Screw, Round-HS(M8x30L)

15 5 Stack - Step of 3 Sample Configuration G3-MS50 Z6 Z0 Z6 Z0 Lat Pull G3-MS5 Adjustable Pulley G3-MS Tricep G3-MS5 Low Row G3-MS53 Frame Detail Item Description Qty Z0 Flat Washer (M8) Z6 Screw, Round-HS(M8x30L) 5

16 G3-MS50 5 Stack - Step of 3 Sample Configuration Z Z Z Z0 Frame Detail Z Z5 Adjustabel Pulley Right G3-MS Item Description Qty Z0 Z09 Z0 Z Z Z5 Z6 Z Flat Washer (M8) Screw, Oval-HS(M0x00L) Nylon Nut (M0) Flat Washer (M0) Screw, Round-HS(M0x80L) Screw, Round-HS(M0x5L) Screw, Oval-HS(M8x5L) Arc Washer 8 8 Z0 Z Z09 Z Z0 Z6 6

17 5 Stack - Step 3 of 3 Sample Configuration G3-MS50 Z Z0 Inner shrouds present outside of North America only. Z Z0 Z0 Z Accessory Detail Item Description Qty Z0 Rubber Tip Weight Shield Bolt Z Rubber Shield 7

18 G3-MS80 8 Stack - Step of 3 Sample Configuration Z6 Z0 Z6 Z0 Lat Pull G3-MS5 Adjustable Pulley G3-MS Tricep G3-MS5 Low Row G3-MS53 Frame Detail Item Description Qty Z0 Flat Washer (M8) Z6 Screw, Round-HS(M8x30L) 8

19 8 Stack - Step of 3 Sample Configuration Z G3-MS80 Z Z Z0 Z Z5 Frame Detail Item Z0 Z Z Z5 Z Description Nylon Nut (M0) Flat Washer (M0) Screw, Round-HS (M0x80L) Screw, Round-HS (M0x5L) Arc-flat Washer Qty 8 9

20 G3-MS80 8 Stack - Step 3 of 3 Sample Configuration Inner shrouds present outside of North America only. Z0 Z0 Z Accessory Detail Item Description Qty Z0 Rubber Tip Weight Shield Bolt 6 Z Rubber Shield 6 0

21

22

23

24 G3-MS / G3-MS5 / G3-MS5 / G3-MS53 / G3-MS0 / G3-MS0 / G3-MS50 / G3-MS80 05 Johnson Health Tech Part # XXXXXXXXXX Rev.3