Actuator ID10. Product Data Sheet Feature

Transcription

1 Product Data Sheet Actuator ID1 ID1 features its heavy load capability and high speed design, which is suitable for various industrial applications requiring quick movement, such as agricultural and construction machine. The adjustable limit cam is equipped for users to fine-tune the stroke based on their needs. Ball Screw or ACME spindle is available for users to choose. Feature - Main applications: Industrial - Input voltage: 2V DC / 12V DC - Max. rated load 3,5N (ACME) / 7,N (Ball Screw) - Max. static load,5n (ACME) / 13,6N (Ball Screw) - Max. speed 67.1 no load - Stroke: 12 ~ 61 mm - IP Protection level: IP5 - Overload protection by clutch - Extension tube material Iron (ACME) or stainless steel (Ball Screw) - Color Black - Power cord length 25 mm (with tinned wires) - Duty cycle: 25%, max. 2 min. continuous operation in min. - Ambient operation temperature: -25 C ~ +65 C - Certified CE marking, EMC Directive 21/3/EU 1

2 Option - Positioning signal feedback with Hall effect sensor x 1 - Analog positioning feedback with Potentiometer (POT) - Adjustable limit switches (not applicable to IP65 option, refer to User Guide) - IP65 Protection level - Manual drive connector (MD, can be driven by hand with a mm hex bit screwdriver or electric screwdriver) - Thermal protection Compatibility Product Model ID1 spec Control box CI1 CIS3-2V motor - Without positioning sensor feedback - 2V motor - With potentiometer 2

3 Performance Data Model No. Spindle type Gear ratio Push / Pull Max. (N) Typical Speed (mm/s) No load Full load Typical Current (A) No load Full load 12V 2V 12V 2V ID1-XX-1-A-XXX ACME 1: ID1-XX-2-A-XXX ACME ID1-XX--A-XXX ACME : ID1-XX-5-B-XXX Ball Screw 5: ID1-XX-1-B-XXX Ball Screw 1: ID1-XX-2-B-XXX Ball Screw 2: ID1-XX-3-B-XXX Ball Screw 3: ID1-XX--B-XXX Ball Screw : Speed vs. Load 2V DC Current vs. Load 12V DC A 1 2 Speed (mm/s) A -A Current (A) 6 1-A 2-A -A Load (N) Load (N) Speed vs. Load 2V DC Current vs. Load 12V DC DC B Speed (mm/s) B 1-B Current (A) B 2-B 3-B -B B 3-B -B Load (N) Load (N) 3

4 Dimensions ID1 ACME - Standard (without Limit switch nor Potentiometer) A S Ø26 Ø5. Ø2.6 Ø With Potentiometer (POT) or Limit switches (LT) A S Ø Ø26 Ø5. Ø2.6 Ø Installation Dimension Stroke (S) Option 12 ( ) 153 (6 ) 23 ( ) 25 (1 ) 35 (12 ) 57 (1 ) 61 (2 ) Retracted length (A)* Standard POT LT (Tolerance: ±5mm)

5 ID1 Ball Screw - Standard (without Limit switch nor Potentiometer) A S Ø26 Ø5. Ø63.5 Ø With Potentiometer (POT) or Limit switches (LT) A S Ø Ø26 Ø5. Ø2.6 Ø Installation Dimension Stroke (S) Option 12 ( ) 153 (6 ) 23 ( ) 25 (1 ) 35 (12 ) 57 (1 ) 61 (2 ) Retracted length (A)* Standard POT LT (Tolerance: ±5mm) 5

6 Front connector Solid type, steel Rear connector Solid type, steel Pivot orientation of rear connector C3 3 C2 3 C1 3 Standard 3 3 C C5 Manual drive connector (MD) - Compatible with IP5 and Gear ratio 5:1 1:1 or 2:1 - Not applicable to IP65, limit switches, nor potentiometer options. - Please refer to ID1 User Guide for operation steps. User needs mm hex bit screwdriver (or electric screwdriver) to drive the motor 6

7 W Y Wiring Standard Gear ratio 5:1, 1:1, 2:1 3:1, :1 Power Red Black M+ M- M- M+ With limit switches Power Red Black M+ M- With Hall effect sensor x 1 - Resolution, 2ppi, 1.27mm/pulse (.77 pulses/mm) Power Red Black M+ M- Signal White Yellow Blue VCC Data GND With potentiometer (POT) The resistance between blue and white wires increased when the actuator extends, and decreased when it retracts. Power Signal Red Black White Yellow Blue M+ M- GND VCC Data B Stroke (mm) Resistance (tolerance: ±.3KΩ) 12.3 ~.1K ~.7K 23.3 ~ 9.2K B W Y 25.3 ~ 7.K 35.3 ~.K 57.3 ~ 9.K Actuator extends 61.3 ~ 9.K Remarks: Connect Red (M+) to + & Black (M-) to - of DC power, the actuator will extend. 7

8 Ordering Key ID A POT - LT - Input voltage 12: 12V DC 2: 2V DC Gear ratio 5: 5:1 (Ball Screw only) 1: 1:1 2: 2:1 3: 3:1 (Ball Screw only) : :1 Spindle type A ACME B Ball screw Stroke 12: 12 mm 153: 153 mm 23: 23 mm 25: 25 mm 35: 35 mm 57: 57 mm 61: 61 mm Positioning feedback (alternative) POT: Potentiometer HS: Hall effect sensor x 1 (option LT is recommended) Option (multiple choice is allowed) LT Adjustable limit switches IP65 IP65 (not compatible with LT and MD) MD Manual drive connector (alternative condition please refer to page 6) TP: Thermal protection (not compatible with 12V DC / gear ratio 5:1) Pivot orientation of Rear connector Blank (standard) C1: 3 counter-clockwise C2 6 counter-clockwise C3 9 counter-clockwise C 3 clockwise C5: 6 clockwise (Please refer to page 6) More information about usage is provided in ID1 User Guide, which can be downloaded from Moteck website. Terms of Use The user is responsible for application suitability of Moteck products. As ongoing improvement process continues, products listed on the Moteck website are subject to change without prior notice. Moteck reserves the right to terminate the sales or remove any product displayed on the website, or listed in its catalogues. 21 Apr. MOTECK. MO-IND-T-2 Version: 2.1