DICHTOMATIK. Bonded Seals US/USS
|
|
|
- Jocelyn Wiggins
- 5 years ago
- Views:
Transcription
1 DICHTOMATIK Bonded Seals US/USS
2 US/USS Bonded seals (US, USS) are metal washers with a trapezoidal elastomer sealing lip vulcanised to their inner diameter. Description Product group Type Sealing material Colour Washer Bonded seal US with inner vulcanised elastomer sealing lip USS with inner vulcanised elastomer sealing lip and additional centring Elastomer sealing lip NBR, NB Elastomer sealing lip FKM, FP NBR 70, black FKM 70, brown Carbon steel SAE 1008 (1.0330) Stainless steel AISI 304 (1.4301) Surface protection Zinc plated washer carbon (Cr VI free) steel Colour Silver-grey Operational application limits Temperature NBR: -30 C to +100 C Temperature FKM: -15 C to +200 C The maximum operating pressure is dependent on the design of the seal, the material, the dimensions, the counter surface and the tightening torque. Bonded seals are suitable for up to 25 Mpa pressure without counterbores in the counter surfaces. Counter surface Surface finish Rmax 15 µm Ra 3.2 µm Function By tightening the screws the elastomer sealing lip is compressed, thereby producing the sealing effect on the surfaces to be sealed. It stops the medium from leaking to the outside, thus preventing loss of pressure. In addition, it provides protection against dirt from the outside. The centring feature of the USS type ensures that the bonded seal is fixed in the correct position for mounting and when tightening the screws, thereby guaranteeing captive mounting. Application area Bonded seals are used as static seals for screw connections and flange seals, for example in machine building and container and apparatus construction. 2 ød G
3 Benefits of bonded seals Simple, captive assembly Secure sealing Reusable Fixation due to inner centring Cost-effective solution Controlled compression due to washer Available in different metal finishes Stocked for almost all European thread sizes Media suitability of elastomer sealing lip NBR Good chemical resistance to mineral oils and greases, hydraulic oils H, HL, HLP, flame-resistant hydraulic fluids HFA, HFB, HFC up to approx. +50 C and water up to max. +80 C. FKM Good chemical resistance to mineral oils and greases, synthetic oils and greases, engine, transmission and ATF oils up to approx C, fuels, flame-resistant hydraulic fluids HFD, aliphatic, aromatic and chlorinated hydrocarbons, water up to max. +80 C, excellent resistance to weather, ozone and ageing, very low gas permeability (therefore suitable for vacuum applications), broad chemical resistance. Remarks Further special types such as bonded seals with elastomer sealing lip vulcanised to the outside (UA type) or according to customers' drawings are available on request. Further elastomer materials such as EPDM, HNBR and FVMQ are available on request. We can also provide the metal washer in different special steels such as AISI 316 (1.4401) or AISI 316Ti (1.4571) on request in order to guarantee improved corrosion and acid resistance. Any Seal. Any Time All the articles in our standard range can be ordered direct from our warehouse. You can check availability at Other dimensions can be manufactured or tools are already in place. General information Height tolerance (S) 1 ± ± ± ± ± ± ± ± ± 0.15 S ød ød ød G 3
4 US No. metric Sizes 301 M US NBR 301 M US FKM M US NBR M US FKM M US NBR ød ød S M US FKM 201 M US NBR 201 M US FKM 202 M US NBR 202 M US FKM 302 M US NBR 302 M US FKM M US NBR M US FKM 303 M US NBR 303 M US FKM 204 M US NBR 204 M US FKM 203 M US NBR 203 M US FKM M US NBR M US FKM M US NBR M US FKM 205 M US NBR 205 M US FKM 304 M US NBR 304 M US FKM 208 M US NBR 208 M US FKM 207 M US NBR 207 M US FKM 206 M US NBR 206 M US FKM 305 M US NBR 305 M US FKM 306 M US NBR 306 M US FKM 209 M US NBR 209 M US FKM 210 M US NBR 210 M US FKM US NBR US FKM 211 M US NBR 211 M US FKM 307 M US NBR 307 M US FKM 214 M US NBR 214 M US FKM M US NBR 213 M US FKM 212 M US NBR 212 M US FKM 215 M US NBR
5 US No. metric Sizes 215 M US FKM 216 M US NBR 216 M US FKM 310 M US NBR 310 M US FKM 218 M US NBR 218 M US FKM 217 M US NBR 217 M US FKM 219 M US NBR 219 M US FKM 312 M US NBR 312 M US FKM 221 M US NBR 221 M US FKM 220 M US NBR 220 M US FKM 313 M US NBR 313 M US FKM 223 M US NBR 223 M US FKM 222 M US NBR 222 M US FKM M US NBR M US FKM 225 M US NBR 225 M US FKM 224 M US NBR 224 M US FKM 315 M US NBR 315 M US FKM 226 M US NBR 226 M US FKM 316 M US NBR 316 M US FKM 227 M US NBR 227 M US FKM 228 M US NBR 228 M US FKM 317 M US NBR 317 M US FKM 229 M US NBR 229 M US FKM 319 M US NBR 319 M US FKM 318 M US NBR 318 M US FKM 230 M US NBR 230 M US FKM 231 M US NBR 231 M US FKM 320 M US NBR 320 M US FKM 232 M US NBR 232 M US FKM 5
6 US No. metric Sizes M US NBR M US FKM 321 M US NBR 321 M US FKM 233 M US NBR ød ød S 233 M US FKM 234 M US NBR 234 M US FKM 323 M US NBR 323 M US FKM 235 M US NBR 235 M US FKM 324 M US NBR 324 M US FKM 237 M US NBR 237 M US FKM 236 M US NBR 236 M US FKM 325 M US NBR 325 M US FKM 326 M US NBR 326 M US FKM 238 M US NBR 238 M US FKM 239 M US NBR 239 M US FKM 327 M US NBR 327 M US FKM 240 M US NBR 240 M US FKM M US NBR M US FKM 328 M US NBR 328 M US FKM 329 M US NBR 329 M US FKM 241 M US NBR 241 M US FKM 330 M US NBR 330 M US FKM 331 M US NBR 331 M US FKM 242 M US NBR 242 M US FKM 243 M US NBR 243 M US FKM 244 M US NBR 244 M US FKM 245 M US NBR 245 M US FKM M US NBR 333 M US FKM 246 M US NBR 246 M US FKM 247 M US NBR
7 US No. metric Sizes 247 M US FKM 335 M US NBR 335 M US FKM 336 M US NBR 336 M US FKM 248 M US NBR 248 M US FKM 337 M US NBR 337 M US FKM 249 M US NBR 249 M US FKM 250 M US NBR 250 M US FKM 251 M US NBR 251 M US FKM 252 M US NBR 252 M US FKM 253 M US NBR 253 M US FKM 254 M US NBR 254 M US FKM 255 M US NBR 255 M US FKM No. imperial BSP 001 6BA US NBR 001 6BA US FKM 002 4BA US NBR 002 4BA US FKM 003 2BA US NBR 003 2BA US FKM 004 1/ US NBR 004 1/ US FKM 005 1/ US NBR 005 1/ US FKM 006 5/ US NBR 006 5/ US FKM 007 5/ US NBR 007 5/ US FKM US NBR US FKM 009 7/ US NBR 009 7/ US FKM 010 9/ US NBR 010 9// US FKM 011 5/ US NBR 011 5/ US FKM / US NBR / US FKM / US NBR 7
8 US No. imperial BSP Sizes / US FKM / US NBR / US FKM / US NBR / US FKM ød ød S / US NBR / US FKM / US NBR / US FKM / US NBR / US FKM US NBR US FKM 020 3/8 1/ US NBR 020 3/8 1/ US FKM 021 1/2 1/ US NBR 021 1/2 1/ US FKM US NBR US FKM 023 3/ US NBR 023 3/ US FKM 024 3/ US NBR 024 3/ US FKM /16 1/ US NBR /16 1/ US FKM 026 7/8 5/ US NBR 026 7/8 5/ US FKM / US NBR / US FKM / US NBR / US FKM /16 7/ US NBR /16 7/ US FKM / US NBR / US FKM / US NBR / US FKM /8 1 1/ US NBR /8 1 1/ US FKM /8 1 1/ US NBR /8 1 1/ US FKM /8 1 3/ US NBR /8 1 3/ US FKM / US NBR / US FKM US NBR US FKM / US NBR / US FKM / US NBR / US FKM / US NBR / US FKM 8
9 US No. imperial BSP Sizes 519 1/ US NBR 519 1/ US FKM 510 1/ US NBR 510 1/ US FKM 511 1/ US NBR 511 1/ US FKM 512 3/ US NBR 512 3/ US FKM 513 1/ US NBR 513 1/ US FKM 514 3/ US NBR 514 3/ US FKM US NBR US FKM / US NBR / US FKM / US NBR / US FKM US NBR US FKM Sizes stainless steel No. metric 201 M US NBR 202 M US NBR 203 M US NBR 204 M US NBR 205 M US NBR 304 M US NBR 206 M US NBR 207 M US NBR 210 M US NBR 211 M US NBR 212 M US NBR 213 M US NBR 217 M US NBR 218 M US NBR 222 M US NBR 225 M US NBR 224 M US NBR 227 M US NBR 228 M US NBR 229 M US NBR 230 M US NBR 232 M US NBR 235 M US NBR 236 M US NBR 238 M US NBR 239 M US NBR 241 M US NBR 243 M US NBR 244 M US NBR 247 M US NBR 248 M US NBR 9
10 US No. imperial BSP Abmessungen ød ød S 001 6BA US NBR 003 2BA US NBR 004 1/ US NBR 006 5/ US NBR 007 5/ US NBR 020 3/8 1/ US NBR 021 1/2 1/ US NBR 011 5/ US NBR 023 3/ US NBR / US NBR /16 1/ US NBR 026 7/8 5/ US NBR / US NBR /16 7/ US NBR / US NBR / US NBR /8 1 1/ US NBR /8 1 1/ US NBR 10
11 USS No. metric Abmessungen ød ød S 004 M US NBR 004 M US FKM M US NBR M US FKM M US NBR M US FKM M US NBR M US NBR 006 M US NBR 006 M US FKM M US NBR M US FKM M US NBR M US NBR US NBR US FKM M US NBR M US FKM M US NBR M US FKM 866 M US NBR 866 M US FKM 708 M US NBR 708 M US FKM M US NBR M US FKM 012 M US NBR 012 M US FKM 867 M US NBR 867 M US FKM M US NBR M US FKM M US NBR M US FKM 868 M US NBR 868 M US FKM 870 M US NBR 870 M US FKM M US NBR M US FKM 872 M US NBR 872 M US FKM 873 M US NBR 873 M US FKM 010 M US NBR 010 M US FKM 874 M US NBR 874 M US FKM 875 M US NBR 875 M US FKM M US NBR M US FKM M US NBR M US FKM M US NBR 11
12 USS No. metric Abmessungen M US FKM M US NBR M US FKM 043 M US NBR 043 M US FKM ød ød S No. imperial BSP 820 3/8 1/ US NBR 820 3/8 1/ US FKM 821 1/2 1/ US NBR 821 1/2 1/ US FKM 869 5/ US NBR 869 5/ US FKM 823 3/ US NBR 823 3/ US FKM / US NBR / US FKM /16 1/ US NBR /16 1/ US FKM 826 7/8 5/ US NBR 826 7/8 5/ US FKM / US NBR / US FKM /16 7/ US NBR /16 7/ US FKM 1 5/ US NBR / US NBR / US FKM 1 1/ US NBR 1 1/ US FKM /8 1 1/ US NBR /8 1 1/ US FKM /8 1 1/ US NBR /8 1 1/ US FKM /8 1 3/ US NBR /8 1 3/ US FKM US NBR US FKM / US NBR / US FKM / US NBR / US FKM US NBR US FKM 12
13 USS No. imperial BSP Abmessungen Edelstahl/rost- und säurebeständig 820 3/8 1/ US NBR 820 3/8 1/ US FKM 821 1/2 1/ US NBR 821 1/2 1/ US FKM 869 5/ US NBR 869 5/ US FKM 823 3/ US NBR 823 3/ US FKM / US NBR / US FKM /16 1/ US NBR /16 1/ US FKM 826 7/8 5/ US NBR 826 7/8 5/ US FKM / US NBR / US FKM /16 7/ US NBR /16 7/ US FKM / US NBR / US FKM 1 1/ US NBR 1 1/ US FKM /8 1 1/ US NBR /8 1 1/ US FKM /8 1 1/ US NBR /8 1 3/ US NBR US NBR 13
14 The technical details in this catalogue are based on experience and standart tests repeated in quality assurance and are to be seen as general and nonbinding approximate values which may well vary up or down. We therefore recommend that you consult our technical department for concrete cases in which limits may be reached. The catalogue details may be altered without notice. Upon the publication of a new catalogue, previous editions cease to be valid. Reproduction in any form requires the express consent of Dichtomatik GmbH
15 Germany DICHTOMATIK GMBH Albert-Schweitzer-Ring 1 D Hamburg P.O.Box D Hamburg Phone +49/40/ Fax +49/40/ mail@dichtomatik.de The Netherlands DICHTOMATIK B.V. Benjamin Franklinstraat 6 NL-8013 NC Zwolle Postbus NL-8004 DC Zwolle Phone 038/ Fax 038/ mail@dichtomatik.nl Great Britain DICHTOMATIK LIMITED Donington House Riverside Road Pride Park GB-Derby DE24 8HX Phone 01332/ Fax 01332/ mail@dichtomatik.co.uk Austria DICHTOMATIK HANDELSGES. MBH Rautenweg 17 A-1220 Wien Phone 01/ Fax 01/ mail@dichtomatik.co.at France DICHTOMATIK S.A.S. Espace Entreprises Mâcon Loché TGV F Loché Phone 03/ Fax 03/ mail@dichtomatik.fr Hungary DICHTOMATIK KFT. Vegyész utca H-1116 Budapest Phone 01/ Fax 01/ mail@dichtomatik.hu USA DICHTOMATIK North America 1087 Park Place USA-Shakopee, Minnesota Phone Fax sales@dichtomatik.us Canada DICHTOMATIK Canada 950 Denison Steet Unit 21 CDN-Markham, Ontario L3R3K5 Phone 905/ Fax 905/ sales@dichtomatik.ca Sweden DICHTOMATIK AB Hjalmar Brantings Väg 25 S Landskrona Box 142 S Landskrona Phone 0418/ Fax 0418/ mail@dichtomatik.se Italy DICHTOMATIK S.R.L. Via Delle Fabbriche 6 I Genova-Voltri Phone 010/ Fax 010/ mail@dichtomatik.it
DICHTOMATIK. Cover seals
DICHTOMATIK Cover seals Cover seals Types Cover seal with a smooth elastomer outer coating and a metal partlycoated stiffening ring. Cover seal, semi-shoulder design with a smooth partly rubber-coated
Shaft repair sleeves WSH R
DICHTOMATIK Shaft repair sleeves WSH R WSH R Standard stock range Description Product group Design Material Mounting sleeve material WSH Shaft repair sleeve R Repair stainless steel 1.4301 (AISI 304) carbon
SHAFT SEALS WITH PTFE COATING TCJ
SHAFT SEALS WITH PTFE COATING TCJ DESCRIPTION The TCJ profile is a shaft seal composed of a single metal cage with a rubber coating, PTFE-coated double sealing lip and integrated spring. ADVANTAGES Very
STANDARD SHAFT SEALS VC
STANDARD SHAFT SEALS VC DESCRIPTION The VC profile is a shaft seal composed of a single metal cage with a rubber coating and a primary sealing lip without a spring. ADVANTAGES Very good static sealing
STANDARD SHAFT SEALS SC
STANDARD SHAFT SEALS SC DESCRIPTION The SC profile is a shaft seal composed of a single metal cage with a rubber coating and a primary lip with integrated spring. ADVANTAGES Very good static sealing Very
STANDARD SHAFT SEALS VB
STANDARD SHAFT SEALS VB DESCRIPTION The VB profile is a shaft seal composed of a single external metal cage with an internal rubber coating and a primary sealing lip without a spring. ADVANTAGES Good radial
Description Product group Rod seal
Description Product group Rod seal Design N symmetrical u-ring (05) NI asymmetrical u-ring with inner main sealing lip (07) Profile no. 05/07 Specification E suitable for onesided pressure load Model STI
Operating conditions. * Surface roughness of the sliding surface to suit the sealing component used.
Merkel Wiper P 6 Merkel Wiper P 6 Material Wiper lip Material Code Hardness Nitrile rubber NBR 85 NBR B247 85 Shore A Fluoro rubber FKM 85 FKM K664 85 Shore A Operating conditions Fig. 1 Merkel Wiper P
Merkel U-Ring NI 300. Hydraulics Rod Seals Merkel U-Ring NI 300. Merkel U-Ring NI 300. Material. Operating conditions. Product description
Merkel U-Ring NI 300 Merkel U-Ring NI 300 Asymmetrical sealing lips PUR profile ring Sealing edge Material Material Code Hardness Polyurethane 94 AU 925 94 Shore A Operating conditions Material 94 AU 925
Operating conditions. Surface roughness R a R max
Merkel U-Ring NI 300 Merkel U-Ring NI 300 Asymmetrical sealing lips PUR profile ring Sealing edge Material Material Code Hardness Polyurethane 94 AU 925 94 Shore A Operating conditions Material 94 AU 925
Merkel Compact Seal S 8
Merkel Compact Seal S 8 Merkel Compact Seal S 8 Material Rubber head Fabric part Material Code Hardness Nitrile rubber NBR 70 NBR B209 70 Shore A Operating conditions Fig. 1 Merkel Compact Seal S 8 Product
SHAFT-EZE SHAFT SLEEVES
We Are Seals SHAFT SLEEVES SHAFT SLEEVES Vendor Number 131610 WE ARE seals. Better seals. Better Support. It s not marketing speak or something we aspire to be. Seals are in our DNA. Everything we do is
ClaronPolyseal Single Acting Rod Seal PVM & PV
M & Metric tyle and M is a acting rod or piston seal for medium to heavy duty applications. The assembly consists of a male and female header and a series of 'V'. The number of 'V' may be varied to alter
Merkel U-Ring Seal Set 0216
Merkel U-Ring Seal Set 0216 Merkel U-Ring Seal Set 0216 NBR U-ring Backring Fabric U-ring NBR Cotton fabric Code 80 NBR B246 BI-NBR B4 B248 Back-up ring Fig. 1 Merkel U-Ring Seal Set 0216 Product description
DICHTOMATIK. Hydraulic seals
Titel Hydraulik 2008 GB:Titel 2008 10.09.2008 17:08 Uhr Seite 2 DICHTOMATIK Hydraulic seals DICHTOMATIK Hydraulic seals Albert-Schweitzer-Ring 1 D-22045 Hamburg P.O. Box 70 04 80 D-22004 Hamburg Phone
Merkel Double Wiper PT 2
Merkel Double Wiper PT 2 Merkel Double Wiper PT 2 Material O-rings Profile ring Profile ring Material PTFE bronze compound Code PTFE B602 Fig. 1 Merkel Double Wiper PT 2 O-ring Material Code Hardness Nitrile
< INTRODUCE BONDED SEALS >
< INTRODUCE BONDED SEALS > ORIGINAL TYPE: The bonded seal was originally designed to replace copper type washers in higher pressure systems. Simple in construction the gasket comprises a metal annulus,
Intermot Hydraulic Motors. Drum Brakes RC Series
Intermot Hydraulic Motors Drum Brakes RC Series TECHNICAL CATALOGUE INDEX General information Pag. 10 Technical data Pag. 14 Dimensional drawings Pag. 15 Ordering instructions Pag. 17 9 Hydraulic fluids
Diaphragm/piston pressure switches 250 V
0186/ 0187 Diaphragm/piston pressure switches 250 V www.suco.de Stainless steel (1.4305) body With changeover switch and silver contacts Max. voltage 250 V, overpressure safe to 300/600 bar *) See page
O-Rings & Circlips Catalogue
O-Rings & Circlips Catalogue 1 2 Contents O-Rings Table of Groove Dimensions for Dynamic & Static Sealing... 4 Resistance Properties of Various Elastomers... 5 Temperature Requirements... 6 Imperial: Guide
NC or NO, maximum operating voltage up to 42 V. Large selection of electrical plug-in types for quick attachment and reliable connection
M.1 Pressure switches hex 24 with integrated connector Large selection of electrical plug-in types for quick attachment and reliable connection High protection class (to IP67 or IP6K9K) Compact and rugged
P r e s s u r e i S w i t c h e s V a c u u m i S w i t c h e s PressureiTransmitters
P r e s s u r e i M o n i t o r i n g P r e s s u r e i S w i t c h e s V a c u u m i S w i t c h e s PressureiTransmitters TRADITION AND INNOVATION From a mechanical workshop to an international industrial
V-Rings around the clock... around the clock...
Description V-rings are rotary seals that can perform numerous jobs in their function of sealing rotating shafts: sealing against the penetration of dirt, dust, water or watery pollutants, combination
GENERAL INFORMATION HYDRAULIC MOTORS ITALY
GENERAL INFORMATION INTERMOT produces RADIAL PISTON since 1985: our yearly production is more than 13.000 units which we sell all over the world through our agents and authorized sellers. Our motor range
Piston Accumulators High pressure
Piston Accumulators High pressure 1. DESCRIPTION 1.1. FUNCTION Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas is utilised in hydraulic accumulators
Piston Accumulators High pressure
Piston Accumulators High pressure 1. DESCRIPTION 1.1. FUNCTION Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas is utilised in hydraulic accumulators
0110 / 0112 / 0114 / 0116 / 0118 / 0122
00 / 02 / 04 / 06 / 08 / 022 Diaphragm pressure switches with integrated connector M. Setting ranges to up to 725 psi (50 bar) (higher settings refer to page 26) NC or NO, maximum voltage 42 V Zinc-plated
O-RINGS AND STATIC SEALS
O-RINGS AND STATIC SEALS TECHNICAL PRINCIPLES ISC O-Rings 550 Static Sealing 552 Dynamic Sealing 558 Further Technical Notes 565 PRODUCTS Products 572 Design Types 573 Technical Principles O-Rings and
PRODUCT OVERVIEW SEALS AND SERVICES TAILOR-MADE SEALS AND SERVICE PORTFOLIO
PRODUCT OVERVIEW SEALS AND SERVICES TAILOR-MADE SEALS AND SERVICE PORTFOLIO SEALING AND SERVICE COMPETENCY FROM A SINGLE SOURCE WHEREVER YOU ARE WE ARE NEARBY With its 14 locations worldwide, DICHTOMATIK
Merkel PRW 1 Double Wiper with Integrated Pressure Relieve. Product Information Merkel Hydraulics
Merkel PRW 1 Double Wiper with Integrated Pressure Relieve Product Information Merkel Hydraulics Simrit, Your Global Technology Specialist for Seals and Vibration Control Simrit, Your Global Technology
W SERIES TECHNICAL CATALOGUE
WHEEL MOTOR W SERIES TECHNICAL CATALOGUE W 05 INDEX GENERAL INFORMATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Pag. 2 W 05 G100 (Fixed displacement) (SIZE AND TECHNICAL DATA) -
Static SealS
Static seals www.hubata-seals.com Static Seals Contents 2 O-rings 3 Dimensions and Tolerances 4 Materials 5 Standard elastomers 7 Special elastomers 9 Installation housings and design recommendations 25
Turcon Glyd Ring. Double Acting Rubber Energized Plastic Faced Seal Material: Turcon, Zurcon and Elastomer
Turcon Glyd Ring Double Acting Rubber Energized Plastic Faced Seal Material: Turcon, Zurcon and Elastomer 15 Turcon Glyd Ring 16 Turcon Glyd Ring Turcon Glyd Ring Description Successfully used for decades,
Hydraulic Piston Accumulators
1. DESCRIPTION 1.1. FUNCTION Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas (nitrogen) is utilised in hydropneumatic accumulators for storing
Shaft seals around the clock... around the clock... The structure of a shaft seal is characterised by:
Description Shaft seals are rotary seals. They are used to seal rotating or swivelling machine elements (mainly shafts). The areas of application are diverse and can be found in all areas of mechanical
In case the operating parameters are requested at maximum level, these values may not be achieved.
All information contained in our catalogue is released only for general usage and not valid for special applications. Given parameters such as maximum pressure, temperature, sliding speed, surface contact
P r e s s u r e i S w i t c h e s V a c u u m i S w i t c h e s PressureiTransmitters
P r e s s u r e i M o n i t o r i n g P r e s s u r e i S w i t c h e s V a c u u m i S w i t c h e s PressureiTransmitters TRADITION AND INNOVATION From a mechanical workshop to an international industrial
Guarantee for O-rings? Factors influencing their service life.
Guarantee for O-rings? Factors influencing their service life. Guarantee for O-rings? How long will the O-ring last, and can you guarantee that? WE OFFER YOU NO MATTER HOW YOU USE THEM A 5 YEAR GUARANTEE
PRESSURE MONITORING.
MONITORING PRESSURE MONITORING PRESSURE Pressure-control systems overview Technical explanations From page 8 Selection matrix Support for selection of suitable pressure switch Page 10 Pressure switches
Check valve. Type S. Contents. Features. RE Edition: Replaces:
Check valve Type S RE Edition: - Replaces: - Sizes Maximum operating pressure bar Maximum flow l/min R8_ Features For threaded connection (screw-in thread) Leakage-free blocking in one direction Various
Intermot Hydraulic Motors. Brakes
Intermot Hydraulic Motors Brakes TECHNICAL CATALOGUE INDEX DISK BRAKES Pag. 2 DRUM BRAKES Pag. 9 1 Intermot Hydraulic Motors Disk Brakes F Series TECHNICAL CATALOGUE INDEX F21R F21DR Pag. 3 F80 F80S Pag.
Datasheets - General Purpose Elastomers
Datasheets - General Purpose Elastomers Natural Rubber (NR) Market introduction 1840 Price indication, volume index compound 1,0 Service temperature, min C -50 Service temperature, max C +80 Mechanical
Pressure control valves type AGIR, AGIS, AGIU two stage, subplate mounting, ISO 5781 sizes 10, 20 and 32
Table C0701/E Pressure control valves type AGIR, AGIS, AGIU two stage, subplate mounting, ISO 5781 sizes 10, 20 and 32 AGIRR20/***/V AGIU10/11...E Two stage pressure control valves with balanced poppet
Made of zinc-plated steel (CrVI-free) M3 screw terminal Overpressure safety up to 4,350 psi (300 bar) 1) Male thread
M.3 0166 Diaphragm pressure switches with M3 screw terminal Made of zinc-plated steel (CrVI-free) M3 screw terminal Overpressure safety up to 4,350 psi (300 bar) Adjustment range tolerance at room temperature
Diaphragm pressure switches up to 42 V with brass housing. Brass housing M3 screw terminal Overpressure safety up to 500 psi (35 bar) 1) Male thread
0167 Diaphragm pressure switches with brass housing Brass housing M3 screw terminal Overpressure safety up to 500 psi (35 bar) Adjustment range tolerance at room temperature Male thread NO : NC : 36 Screw
HYDRAULIC-MOTORS. Radial Piston Motors with fixed displacement RM...X series V g = 250 cm 3 /rev cm 3 /rev
s with fixed displacement RM...X series V g = 250 cm 3 /rev - 900 cm 3 /rev HYDRAULIC-MOTORS Catalogue No. HM1-015E RM 250X - RM 900X Page 2 Features: many displacements for all applications very high
Accumulator shut-off block. Type ABZSS. Contents. RE Edition: Replaces: 05.13
Accumulator shut-off block Type ABZSS RE 011 Edition: 2016-07 Replaces: 0.1 Nominal diameter DN08; DN10; DN20; DN0 Component series X Maximum operating pressure 0 bar [07 psi] HAD8066 Contents Features
Pressure Switches 30 A/F
CE Marking Directives of the European Council Machinery Directive EMC Directive Low Voltage Directive Pressure Switches 30 A/F Changeover switch Equipment that falls under these directives must have a
Ø range <500 mm. Ø range >500 mm. Operating conditions. Surface quality. Surface roughness R a R max
Hyraulics Ro Seals Merkel U-Ring T 20 Merkel U-Ring T 20 Merkel U-Ring T 20 PUR profile ring Material range
KANTSEAL. -Axial sealing - -Elastomers-
KANTSEAL -Axial sealing - -Elastomers- 61 62 n Description The Kantseal is agood alternative to the O Ring as an axial static seal in cases where particular demands are made. The application and handling
DICHTOMATIK. Rotary seals
Rotary DICHTOMATIK Rotary Albert-chweitzer-Ring 1 D-22045 Hamburg P.O.Box 70 04 80 D-22004 Hamburg Phone +49/40/66 98 90 Fax +49/40/66989101 mail@dichtomatik.de DIN EN IO 9001:2008 Contents Dichtomatik
Pressure switches hex 24
Pressure switches Normally open or normally closed, maximum voltage 42 V Low-cost solution for mechanical pressure monitoring. Stable switching point even after long use and high load. Switching point
1. Inele - O. 2. Șnur Cauciuc RS. 3. Trusă Inele-O. 4. Inele - X. 5. Șaibe Cauciuc Metal US
1. Inele - O 2. Șnur Cauciuc RS 3. Trusă Inele-O 4. Inele - X 5. Șaibe Cauciuc Metal US Flupec SRL Sibiu www.flupec.ro office@flupec.ro +40 269 206 138 DICHTOMATIK O-Rings DICHTOMATIK O-Rings Albert-Schweitzer-Ring
Pressure relief valve, direct operated. Type DBD..K. Contents. Features. RE Edition:
Pressure relief valve, direct operated Type DBD..K RE 25715 Edition: 2015-06 Size 2 Component series 2X Maximum operating pressure 420 bar Maximum flow 2 l/min H8070 Features Screw-in cartridge valve 6
Gear Pumps/Motors Series PGP/PGM 500
Gear Pumps/Motors Series PGP/PGM 500 Express Delivery Program Note This document and other information from Parker Hannifin GmbH, its subsidiaries, sales offices and authorized distributors provide product
SÜDMO NEW SP SERIES - HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD & BEVERAGE INDUSTRY FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC CENTRIFUGAL PUMPS
SÜDMO SP SERIES - NEW HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD & BEVERAGE INDUSTRY FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC CENTRIFUGAL PUMPS SÜDMO SP SERIES - HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD
GSR - your partner for valve technology. Welcome to the world of valve technology. Your GSR Team
Welcome to the world of valve technology GSR - your partner for valve technology This is the world of solenoid valves, with and without explosion protection, of external medium-controlled valves and motorised
Installation and commissioning of Settima screw pumps. Type GR** SMT** 3-screw screw pumps. a. Medium:
Settima screw a. Medium: HL oil conforming to DIN 51524 Parts 2 and 3 Special media such as: HFA min 5% oil HFB min 40% oil HFC max. 35-55% water HFDR high-viscosity lubricants SKYDROL, MIL-H may also
SEALING SOLUTIONS FOR YOUR DRIVES
Intelligent Drivesystems, Worldwide Services SEALING SOLUTIONS FOR YOUR DRIVES EN SEALING SYSTEMS FOR NORD GEAR UNITS AND GEARED MOTORS SEALING SYSTEMS FOR NORD GEAR UNITS AND GEARED MOTORS NORD DRIVESYSTEM
INDUSTRIAL HOSES - compensators
Working parameters of rubber expansion joints The parameters of rubber compensators given in the tables (, temperature and displacement) are the maximum values and they must not occur simultaneously. The
Reservoir oil filler/breather
Reservoir oil filler/breather RE 50070/10.05 Replaces: 01.03 1/10 Types ELF, BF and BL R 7802_2 Reservoir oil filler/breather with sieve type ELF 3... H_S_95 Reservoir breather type BF 7...K... Overview
ÍNDICE FICHAS TÉCNICAS
S BBES ÍNDICE S TÉCNICAS AFLAS-B85 EPDM-B85 EPDM-85-KTW EPDM-W85-FDA FPM-B85 FPM-B85-GD FPM-B85 FPM-B85-FDA HNB-B85 HNB-B85-GD HNB-B85-GD-LT NB-B85 NB-W85-FDA SILICONE-B85-FDA SILICONE-85-FDA 3 4 5 6 7
Knife gate valve TV. Data is only for informational purpose. All specifications are subject to change without notice issue 9
Knife gate valve TV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-08 issue 9 Knife gate valve TV Stafsjö s knife gate valve TV can be used an
Solenoid directional valves type DPHI and DPHE two stage, ISO 4401 size 10, 16, 25 and 32
www.atos.com Table E0857/E Solenoid directional valves type DPHI and DPHE two stage, ISO 4401 size 10, 16, 25 and 32 DPHE471*/H Spool type, two stage directional valves with solenoids certified according
Head office : Les Petites Roches TREPT (Lyon) - France Tel : +33 (0) Fax : +33 (0)
Head office : Les Petites Roches - 38 460 TREPT (Lyon) - France Tel : +33 (0)4 74 92 92 63 - Fax : +33 (0)4 74 92 92 64 - e-mail : evco@evco.fr - web sites : http://www.evco.fr - http://www.dynalast.net
1/4 BSPP. 500 psi / 35 bar) psi / 35 bar) 8 018X XXX 03 X XXX
0186 / 0187 Diaphragm / piston pressure switches up to 250 V with stainless steel housing M.4 Stainless steel housing (AISI 303 / 1.4305) Snap action with silver contacts Overpressure safety up to 4,350
MK508UBS Series. Back Pressure Regulator MK508UBS. Threaded or Flanged Connections Carbon Steel, Stainless Steel & Alloy Construction.
MK508UBS Series Threaded or Flanged Connections Carbon Steel, Stainless Steel & Alloy Construction The MK508UBS Series are spring loaded, direct-operated, pressure relief valves used downstream of pressure
Stafsjö s ATEX solutions for category 1 D (Zone 20)
Stafsjö s ATEX solutions for category 1 D (Zone 20) Data is only for informational purpose. All specifications are subject to change without notice. 1 2017-02-2 issue 1 ATEX solutions for category 1 D
Inline filter. Features RE 51401/ Types 40 FLEN 0160 to 1000; 40 FLE 0045, 0055, 0120 to 0270
Inline filter RE 5101/08.08 1/10 Types 0 FLEN 0160 to 1000; 0 FLE 005, 0055, 010 to 070 Nominal size according to DIN 550: 0160 to 1000 Nominal size according to BRFS: 005, 0055, 010 to 070 Nominal pressure
Electronic Pressure Switches
96 Pressure Switches Electronic Pressure Switches Electronic Electronic pressure switches, series, Very attractively priced electronic pressure switches, particularly for high volume deployment High overpressure
Hydraulic cylinders type CC - round heads with counterflanges to ISO nominal pressure 25 MPa (250 bar) - max 32 MPa (320 bar)
www.atos.com Table B-/E Hydraulic cylinders type CC - round heads with counterflanges to ISO 60 - nominal pressure MPa (0 bar) - max MPa (0 bar) SWC Cylinders Designer Software for assisted selection of
The Cleanest Design. SRC Sanitary Remote-Controlled Valve PD US
The Cleanest Design SRC Sanitary Remote-Controlled Valve PD 60019 US8 2001-10 Application SRC is an air-operated seat valve with a sanitary and flexible design giving a wide field of application, e.g.
STAUFF STAUFF. Local solutions for individual customers worldwide. Return Line Filters RTF FILTRATION TECHNOLOGY. Ordering Code # :SFT A - UK
STAUFF THIS IS STAUFF RESPONSE AND FLEXIBILITY COMPETENT SERVICE PROMPT DELIVERY ENSURED QUALITY FRIENDLY SERVICE PROVEN IN PRACTICE Australia Stauff Corporation (Pty.) Ltd. P.O.Box 227, Unanderra Wollongong,
Piston Pumps Series P2 / P3 Variable Displacement
Piston Pumps Series P2 / P3 Variable Displacement Catalogue HY11-2600/UK July 2003 Contents Series P2/P3 Description Technical information 3 Ordering code 4 Control options LA and LB 6 Control options
The Original Seat Valve
.1 The Original Seat Valve SRC Sanitary Remote-Controlled Valve Application SRC is an air-operated seat valve in a sanitary and flexible design giving a wide field of application, e.g. as a stop valve
Gear Pumps. Series PGP Fixed Displacement Pumps, Cast-Iron Designs
Gear Pumps Series PGP Fixed Displacement Pumps, Cast-Iron Designs aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Table
SCRAPERS. Busak+ Shamban
SCRAPERS 1 2 Scrapers Contents Choice of Scraper Element... 4 Turcon R Excluder R 2... 7 Turcon R Excluder R 5... 15 Turcon R Excluder R 500... 23 Scraper DA17... 29 Scraper DA22 and RSW... 35 Scraper
PETSEALS. Material TENSILE STRENGTH (KG/CM 2 ) ELONGATION(%) TEMPERATURE RANGE( ) MATERIAL %MAX HRSX NITRILE 70 (NBR 70) ~100 70H x
Ver:201.0. INDEX 1 2 PHYSICAL AND CHEMICAL PROPERTIES OF THE MOST IMPORTANT ELASTOMERS 3 GLAND DIMENSIONS 4 SURFACE IMPERFECTIONS 5 DIMENSIONAL TOLERANCES 6 O-RING PAGE O-RING AS-568 SERIES 01-06 O-RING
Type 400LDN0040 to 1000; 400LD0130, 0150
Duplex filter with filter element according to DIN 24550 Type 400LDN0040 to 1000; 400LD0130, 0150 RE 51429 Edition: 2012-07 Replaces: 02.11 Size according to DIN 24550: 0040 to 1000 Additional sizes: 0130,
Technical explanations for mechanical pressure switches
Technical explanations for mechanical pressure switches 7 6 5 4 7 5 6 4 Diaphragm pressure switch NO Piston pressure switch NC Change over 3 2a 1 3 2b 10 9 What is a mechanical pressure switch? Mechanical
PS-SEAL PTFE based high-performance seals
Garlock PS-SEAL PTFE based high-performance seals PS-SEAL Contents Introduction and advantages.............. 2 Technical data............................ 3 + 4 PS Standard/PS Non Standard.............
TURCON STEPSEAL 2K. - Single Acting - Rubber Energised Plastic Faced Seal - Material - TurconR and ZurconR - Busak+ Shamban
contents (catalogue) main menu product range fullscreen/variable R R TURCON STEPSEAL 2K - Single Acting - Rubber Energised Plastic Faced Seal - Material - TurconR and ZurconR - 19 20 Turcon R Stepseal
High-pressure inline filter, flangeable
High-pressure inline filter, flangeable RE 51405/08.08 1/1 Types FEN 0040 to 1000; FE 0003, 0015, 0018 Nominal size according to DIN 4550: 0040 to 1000 Nominal size according to BRFS: 0003, 0015, 0018
SERIES SF2-250 SUCTION FILTER. Flow rate to 45 gpm
SERIES SF2-250 SUCTION FILTER Flow rate to 45 gpm D e s c r i p t i o n 250 The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows
Air breather filter Pi 0201
Air breather filter Pi 0201 1. Features Filter for ventilating and bleeding mobile and stationary hydraulic tanks The air breather filter Pi 0201 with preloaded valves are used for tanks which are under
Polon Piston sealing set
The double-acting piston sealing set profile consists of a PTFE piston sealing ring and an elastomer O-Ring as a preloading element. Profile is particularly suitable for double-acting pistons in control
AKG 2009 (changes and errors expected) HC- series. Classic
AKG 2009 (changes and errors expected) Classic performance hc @ 1750 RPM FAN SPEED HEAT REJECTION Horsepower Removed @ 100-F ETD 640 320 160 80 40 20 10 HC26 @ 3450 RPM HC14 @ 3450 RPM HC66 HC48 HC32 HC240
5. STRAUB-FLEX / STRAUB-REP
5. STRAUB-FLEX / 5.1 STRAUB-FLEX For gas and water supply, sewage treatment, industrial plants, power plants and shipbuilding: STRAUB- FLEX is the optimal pipe joint. Suitable for suction or pressure lines,
Technical explanations for mechanical pressure switches
Technical explanations for mechanical pressure switches 7 6 5 4 7 5 6 4 Diaphragm pressure switch NO Piston pressure switch NC Change over 3 2a 1 3 2b 10 9 What is a mechanical pressure switch? Mechanical
Electronic Pressure Switches
96 Pressure Switches Electronic Pressure Switches Electronic E. Electronic pressure switches, series, Very competitively priced electronic pressure switches High overpressure protection (up to x) Small,
FILTERS. PUMP CARE - Suction filters TECHNICAL DATA ORDERING AND OPTIONS CHART CLOGGING INDICATORS. PRESSURE DROP ( p) CURVES CROSS FUNCTIONAL VIEW
FILTERS HYDRAULIC DIVISION - Suction filters SD TECHNICAL DATA ORDERING AND OPTIONS CHART CLOGGING INDICATORS PRESSURE DROP ( p) CURVES CROSS FUNCTIONAL VIEW SPARE PARTS ORDERING INFORMATION DINSIONS OF
Turcon RotoGlydRing. Latest information available at Edition August
Turcon RotoGlydRing 241 242 Turcon Roto Glyd Ring n TURCON ROTARY SEALS - ELASTOMER ENERGIZED n Turcon Roto Glyd Ring Description The Turcon Roto Glyd Ring is used to seal rods, shafts, axles, bores, rotary
DMRTM. SHAFT SEALS
TM www.daemar.com SHAFT SEALS For over 30 years Daemar Inc. has remained focused on partnering with our customers to deliver fluid sealing solutions that meet their business challenges. Whether the application
MOTORS M HYDRAULIC MOTORS
MOTORS M HYDRAULIC MOTORS T E C H N I C A L C A T A L O G Fixed displaced axial piston motors POCLAIN HYDRAULICS Displacement cm³/rev [in³/rev.] M0 M1 M2 M3 From 7,07 [0.43] to 17,84 [1.09] From 9,08 [0.55]
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-05 (Rev. 08/2015)
General Description The FKB Knife-gate valves model VGU-05 brings cost-effective solution to block the flow of abrasive fluids. These are strong equipments to be installed between flanges, which has Wafer
DUAL DISPLACEMENT HYDRAULIC MOTOR
R8 C O 2DISPLACEMENT U PL E ITALY DUAL DISPLACEMENT HYDRAULIC MOTOR R8C SERIES TECHNICAL CATALOGUE The data specified into the catalogue are for product description purpose only and must not be interpreted
Explosion-Protected Pressure Switches
Explosion-Protected Pressure Switches To new ATEX Standard TECHNICAL DATA 0165 0340 0341 Degree of protection: IP 65 ATEX protection zone: 1 22 22 Switching power: 1 A / 250 VAC 0.25 A / 250 VDC 2 A /
Chibro Press Fit Stainless Steel Pipe and Fittings. Data Sheet
Chibro Press Fit Stainless Steel Pipe and Fittings General Information Data Sheet The Chibro Press Fit Pipe system permits the installation of a metal piping system in a reliable and economic way. The
GLOBAL STANDARD COOLER
COOLER RUGGED ENVIRONMENT COOLING SYSTEMS PRODUCT INFORMATION AKG CooL-Line is a standard line of products from the market leader in high performance aluminum cooling systems. AKG is best known for its
Pressure: Max working 8 bar (116 psi) (acc. to NFPA T ) Burst 16 bar (232 psi) (acc. to NFPA T )
HYDRAULIC FILTRATION Tank top return filters Technical Information Pressure: Max working 8 bar (116 psi) (acc. to NFPA T 3.1..1) Burst 16 bar (232 psi) (acc. to NFPA T 3.1..1) Housing Connection Ports: