ASI. Blinking or Steady Light Modules
|
|
|
- Isaac Wilcox
- 5 years ago
- Views:
Transcription
1 Signal beacons Ø6mm / Ø.44 Steady light modules. BA5d fitting. Bulb not included. LB6 EL Orange LB6 EL3 Green LB6 EL4 Red LB6 EL5 Yellow LB6 EL6 Blu LB6 EL White Blinking or steady light modules. BA5d fitting. Bulb not included. LB6 GL B Orange, -4VAC/DC LB6 GL B3 Green, -4VAC/DC LB6 GL B4 Red, -4VAC/DC LB6 GL B5 Yellow, -4VAC/DC LB6 GL B6 Blue, -4VAC/DC LB6 GL B White, -4VAC/DC LB6 GL M Orange, 4-30VAC LB6 GL M3 Green, 4-30VAC LB6 GL M4 Red, 4-30VAC LB6 GL M5 Yellow, 4-30VAC LB6 GL M6 Blue, 4-30VAC LB6 GL M White, 4-30VAC Sound-light pulsed or continuous modules. Bulb included. LB6 S B Orange, 4VAC/DC (0dB) LB6 S B3 Green, 4VAC/DC (0dB) LB6 S B4 Red, 4VAC/DC (0dB) LB6 S B5 Yellow, 4VAC/DC (0dB) LB6 S B6 Blue, 4VAC/DC (0dB) LB6 S B White, 4VAC/DC (0dB) Signal beacons are fundamental elements in manufacturing processes for the visual and audible signalling of the system status. Technical characteristics Maximum operational voltage: 50VAC/DC Consumption of sound modules LB6 S...: 50mA Material: Polycarbonate Connections: Screw clamp terminals, maximum.5mm /6 AWG conductor section Tightening torque: 0.5Nm/4.5lbin Operating temperature: C Degree of protection IEC/EN: IP54; IP30 if used with LB6 BP 04, LB6 BP 06 or LB6 BP 0. Reference standards Compliant with standards: IEC/EN , IEC/EN Combinations Light and sound modules LB6 EL - LB6 GL - LB6 S B Fixing base and extension tubes LB6 BP 03 LB6 BP 05 LB6 BP 07 LB6 BP 04 ❶ LB6 BP 06 ❶ LB6 BP 0 ❶ LT7 ALB (incandescent bulb) LT7 TP000 LT7 ALL (LED Bulb) ❶ Only for sound-light modules. (plastic) LT7 BP 0 (plastic) LB6 EL LB6 GL LB6 S... Visual code Red Yellow Orange Blue Green White Meaning Danger. Warning and Mandatory Normal No specific Emergency. Caution. command. situation. meaning. Abnormal Regular situation. operation. Sound Fast modulated Continuous Alternating Constant and Other sounds. repetition or short sound. sound at. prolonged high-pitch constant tone sound pulsing. after an alarm. Correlated Immediate Control Intervention No specific Depending on actions intervention intervention needed for action. the situation. to deal with required. mandatory dangerous action. situation. Interpretation of light and sound signals for signal towers and beacons Light and sound signals are a fundamental element for the safety of a system. To avoid incorrect interpretations, a European standard has been introduced defining an equivocal meaning to visual or audible signalling devices. Each colour or sound alarm corresponds to a specific state of operation of the connected system and various levels of warning, as given in the following table, according to EN 9-IEC/EN standards. The white coloured module does not have a specific meaning so it can be used as one may need.. P.O. Box 340, Mechanicsburg, PA 7055 Phone: (77) or (77)
2 parts for signal towers and beacons LT7 BP 0 LT7 ALB LT7 ALL Fixing bases. Horizontal surface mount, with 00mm/3.94 extension LT7 BP 0 Vertical wall mount, 0.07 Extension tube for plastic base, stackable sections. LT7 TP mm/3.94, 0.09 Incandescent bulb, 5W, BA5d fitting. LT7 ALB A VAC/DC LT7 ALB B 4VAC/DC LT7 ALB E 30VAC/DC LT7 ALB M 60VAC/DC LED bulb, BA5d fitting. LT7 ALL A4 Red, VAC/DC 0,00 LT7 ALL A White, VAC/DC 0,00 LT7 ALL B3 Green, 4VAC/DC 0.00 LT7 ALL B4 Red, 4VAC/DC 0.00 LT7 ALL B5❶ Yellow/Orange, 4VAC/DC 0.00 LT7 ALL B6 Blue, 4VAC/DC 0.00 LT7 ALL B White, 4VAC/DC 0.00 LT7 ALL E3 Green, 0-0VAC 0.00 LT7 ALL E4 Red, 0-0VAC 0.00 LT7 ALL E5❶ Yellow/Orange, 0-0VAC 0.00 LT7 ALL E6 Blue, 0-0VAC 0.00 LT7 ALL E White, 0-0VAC 0.00 LT7 ALL M3 Green, 30-40VAC 0.00 LT7 ALL M4 Red, 30-40VAC 0.00 LT7 ALL M5❶ Yellow/Orange, 30-40VAC 0.00 LT7 ALL M6 Blue, 30-40VAC 0.00 LT7 ALL M White, 30-40VAC 0.00 ❶ Used with yellow or orange light modules. The assembly operation of the signal towers is simple and fast and does not require the use of any tools. The fixing of each element on top of the other is obtained by the bayonet insert joint, with slight pressure and simple rotating movement. There are specific white inscriptions to indicate the correct alignment. Technical characteristics Consumption of bulb fitted on light modules: LT7 ALB A: 40mA LT7 ALB B: 0mA LT7 ALB E: 43mA LT7 ALB M: ma LT7 ALL A...: <60mA LT7 ALL B...: <30mA LT7 ALL E...: <0mA LT7 ALL M...: <0mA. Reference standards Compliant with standards: IEC/EN , IEC/EN , UL50, CSA C. n 4. parts for signal towers Ø70mm / Ø.75 only LT7 BM 0 Fixing bases. LT7 BM 0 Horizontal surface mount, metal, black finish LT7 BM 0 Vertical wall mount, 0.4 metal Extension tubes for metal base, anodised aluminium, fixed non-stackable sections. LT7 TM mm / LT7 TM mm / LT7 TM mm / LT7 TM mm / LT7 TM mm / LT7 TM mm / LT7 BM 0 LT7 TM. P.O. Box 340, Mechanicsburg, PA 7055 Phone: (77) or (77)
3 parts for signal beacons Ø6mm / Ø.44 LB6 BP03 LB6 BP05 Fixing bases for light modules. LB6 BP 03 Horizontal surface mount, plastic, black colour LB6 BP 05 For Ømm / Ø hole type, LB6 BP 07 For extension 0.00 connection, plastic, black colour. Use with fixing bases and LT7 BP 0 Fixing bases for sound modules. LB6 BP 04 Horizontal surface mount, plastic, black colour LB6 BP 06 For Ømm / Ø hole type, LB6 BP 0 For extension 0.00 connection, plastic, black colour. Use with fixing bases and LT7 BP 0 The assembly operation of the signal beacons is simple and fast and does not require the use of any tools. There are specific white marks to indicate the correct alignment. LB6 BP07 LB6 BP04 LB6 BP06 LB6 BP0. P.O. Box 340, Mechanicsburg, PA 7055 Phone: (77) or (77)
4 SIGNAL TOWERS Ø70mm / Ø.75 LT7 S0 B LT7 EL... LT7 GL... LT7 FL... LT7 S... LT7 S... Light modules LT7 EL... LT7 GL... LT7 FL (.0 ) 3 (0.5) Ø60 (.36 ) Sound modules LT7 S0 B 9 (3.6 ) LT7 S... LT7 S... 7 (.3 ) Connection modules LT7 CM 0 LT7 CP 0 6 (0.63 ) 45.5 (.79 ) 3 (0.5 ) Ø60 (.36 ) 0.5 (4.00 ) 57.5 (6.0 ) 3.5 (.40 ) 69.5 (0.6 ) 35.5 (. ) 3.5 (5.0 ) (.64 ) (7.7 ) LT7 CM 0 - LT7 CP 0 7 (0.7 ) 4 (.65 ) 4 (.9 ) SIGNAL BEACONS Ø6mm / Ø.44 LB6 EL... LB6 GL... LB6 S... with base LB6 BP 03 and LB6 BP 04 ❶ with base LB6 BP 05 and LB6 BP 06 ❶ with base LB6 BP 07 and LB6 BP 0 ❶ 3.5 (0.9 ) 3 (. ) 37 (.46 ) 7 (0.67 ) Ø6 (.44 ) (3.35 ) Ø (0.7 ) Ø6 (.44 ) Ø6 (.44 ) 65 (.56 ) 3.5 (. ) 56.3 (.7 ).3 (0. ) (+0.4,-0 / +0.0, -0 ) ❶ With slits for sound light modules LB6 S ( ). P.O. Box 340, Mechanicsburg, PA 7055 Phone: (77) or (77)
5 ACCESSORIES - Extensions and bases LT7 BP 0 LT7 BM 0 LT7 BM 0 (4.0 ) Ø5 (0.9 ) (0.7 ) 4.5 (0.57 ) Ø5 (0.9 ) 3 (.50 ) Ø67 (.64 ) 5 (.0 ) 05 (4.3 ) (0.7 ) 64.5 (.54 ) (0.3 ) (0.3 ) Ø30 (. ) 70 (.75 ) (0.43 ) 9 (0.35 ) (0.3 ) LT7 TP 000 Ø5 (0.9 ) (0.7 ) (4.0 ) LT7 TM (39.37 ) max 70 (.75 ) 7 (.79 ) 0 09 (4.9 ) Wiring diagrams SIGNAL TOWERS Ø 70mm LT7... SIGNAL BEACONS Ø 6mm LT7 CM 0 - LT7 CP 0 X BULB BULB C X L N Connect terminals C and as indicated to power the first module. If other modules are fitted, the respective terminals must be connected accordingly.. P.O. Box 340, Mechanicsburg, PA 7055 Phone: (77) or (77)
Switches Unlimited Contact: Phone: * Fax:
Phone: 00-221-047 * Fax: 71-672-6370 Page -2 Page -3 SIGNAL TOWERS Signal towers Ø70mm Steady, blinking light or flash modules Pulsed or continuous sound modules Incandescent and LED bulbs. SIGNAL BEACONS
SIGNAL BEACONS Signal beacons Ø62mm Blinking or steady light modules Sound-light pulsed or continuous modules Incandescent and LED bulbs.
Page -2 Page -3 SIGNAL TOWERS Signal towers Ø70mm Steady, blinking light or flash modules Pulsed or continuous sound modules Incandescent and LED bulbs. SIGNAL BEACONS Signal beacons Ø62mm Blinking or
Page 8-3. MULTICOLOURED SIGNAL TOWERS Ø70mm/2.75. Modular signal towers Ø70mm/2.75
Page -2 SIGNAL TOWERS Ø45mm/1.77 Signal towers supplied already assembled Ø45mm/1.77 Steady light modules Pulsed or continuous sound modules Built-in LED circuit. Page -3 MULTICOLOURED SIGNAL TOWERS Ø70mm/2.75
Signal towers and beacons
Signal towers 5mm/1.77 Supplied already assembled Steady light and pulsed or continuous sound modules Multicoloured signal towers Ø70mm/2.75 Modular and combinations up to 5 modules Steady light and pulsed
Eco-Modul 60 Signal tower
37 60 Signal tower Ø 60 mm modular signal tower series Complete range of high-luminosity LED light modules with steady/flashing/strobe beacon functions, 6 different lens colours High-performance steady
Signal Tower K 70 Signal Beacons K SB. New in the ABB Pilot devices assortment
Signal Tower K 70 Signal Beacons K SB New in the ABB Pilot devices assortment New in the ABB Pilot devices assortment Signal Tower K 70 - Fast mounting of signal elements using bayonet fixing - Easy changing
S 370 MODULAR STACK LIGHTS FEATURES. Multifunctional Lamp. 1 lamp, 3 different kinds of lights. Steady, flashing and rotating.
MODULAR STACK LIGHTS S 370 FEATURES Multifunctional Lamp An easy and functional accessory. Simplifies the un-mounting of the stack light Remount fast and flawlessly Light lamp 1 lamp, 3 different kinds
Enclosure and Panel Solutions. View Industrial Products Brochure
View Industrial Products Brochure 54 55 Cable Glands, Cord Grips, Strain Relief Fittings Nylon Cable Glands Material: Polyamide PA6.6 Temp Range: -20 C to +90 C Sealing Ring: Neoprene 50 sh A Protection
Signaling solutions. Monolithic indicator banks Harmony type XVC. Dimensions: page 12
Presentation Presentation The monolithic indicator banks in the Harmony XVC range are designed for long distance indication of the operating states or sequences of a machine or installation, either visually
The modular structure makes it possible to build at least 5 configurations for each visual lens unit
180 SERIES Modular visual and audible indicators A simple bayonet system simplifies the mounting and maintenance, which can be performed in complete safety The wiring unit can be easily reached and extracted,
PRODUCT SPECIFICATION. Stack Lights. Series.
PRODUCT SPECIFICATION Stack Lights Series www.wernerelektrik.com Light Color Significance... Specifications... Functional Specification... Model Number Structure - Stack Lights... Model Number Selection...
7. 4 th Stack Lens Color
Industrial Tower Lamps Ø56mm; Bulb Type with Buzzer TBK Model Number Legend 1 2 1. Series TBK 2. Type www.inno.sg/tbk 3 4 5 6 7 8 9 B: Direct Mount (no pole) P: Direct Mount S: Panel Mount 3. Indication
SUPER-BRIGHT MULTI-CHIP LED SIGNAL LAMPS
SUPER-BRIGHT MULTI-CHIP LED SIGNAL LAMPS T-1-3/4 6V, 12V, 28V, 36V, 48V & 60V Multi-Chip LED Lamp Data Sheet : SEL-MCL-001-HB T-1-3/4 Midget Flanged Based T-1-3/4 Midget T-1-3/4 Bi-Pin T-1-3/4 Midget Grooved
Quality touch! Pushbuttons and selector switches. Ø22mm QUICK AND EASY ACTUATOR INSTALLATION. Click! Click!
Pushbuttons and selector switches Ø22mm Quality touch! QUICK AND EASY ACTUATOR INSTALLATION Click! Click! - Actuator fixing on the mounting surface, through a Ø22mm drilled hole, is obtained using its
Product Application Guide- 30mm Stacklights. 30 mm Stacklight- Light Only
Product Application Guide- 30mm Stacklights 30 mm Stacklight- Light Only Part Number Structure JR 28 - RYG - 4 Series: JR = 30mm Round Stacklight Maximum Voltage: 16 = 9 to 16 Vdc; 28 = 20 to 28 Vac/dc
General_technical_data Series
Emergency-stop Switching system The double-break switching system can be supplied for the following switching functions: 1 Normally closed, 2 Normally closed, 1 Normally closed + 1 Normally open. The Normally
Q SERIES Ø16mm (.630") Panel Mount LED Indicators Distinctive features and specification
Distinctive features and specification VOYC1603R1US Features 16mm panel mounting LED indicator 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs Plated brass bezel finished in bright
FACTORY ASSEMBLED TOWERLITES
FACTORY ASSEMBLED S HOW TO ORDER: example... LX2 V X C- A 453 W Towerlite Diameter & Watt LX1=1.7 (45mm) LX2= 2.5 (65mm) LX3= 3.5 (90mm) LX4= 5.4 (136mm) Mounting Type V= Vertical Flat Base H= Horizontal
Stack Light- Light Only. Stack Light with Sound
Stack Light- Light Only Part Number Structure JT 028 - RYGBC - C D Series: JT = Triangle Shaped Stack Light Maximum Voltage: 028 = 20 28 Vac/dc; 120 = 90 120 Vac Only Stack Colors: R = Red; Y = Yellow/Amber;
L1 = Solder terminal 2.8 x 0.5 mm Ø Behind panel
Raised design Emergency-stop switch, foolproof EN IEC 60947-5-5, IP 65 Equipment consisting of (schematic overview) L1 35.6 6 max. 59.5 41 18x24 Actuator Product can differ from the current configuration.
Q22 series. Ø22 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING
IND-Q22-17-07 DISTINCTIVE FEATURES 16.75 mm colored diffused epoxy lens or 16.75 mm super bright LEDs Secret until lit polycarbonate decals or custom engraving (2.8 x 0.8) solder lug/faston terminals,
LED Signal Towers. Pre-assembled and pre-cabled in different aperture to highlight the processes. Features/Unique selling proposition
Pre-assembled and pre-cabled in different aperture to highlight the processes LED Signal Towers Modular and monolithic design are available. Patlite s extensive product range cover highly advanced LED
HERZ Motorised Actuator
HERZ Motorised Actuator Data sheet for HVACT Issue 1017 Dimensions Models HVACT24-01 HVACT230-01 HERZ Motor Valve Drive, Floating 3-point, M28 x 1.5, 24 V, 50 Hz actuating force 140 N, operating voltage
Ex UPS standard Series 8265
> Guard battery monitoring according to IEC/EN 60079 et seq. > Adjustable buffer time > Battery function test > Potential-free signal outputs > Maximum efficiency > Increased for reliable triggering of
Switches- and Indicators
Switches- and Indicators Contents Description... 3 Product Assembly... 4 Mounting instruction... 6 Devices raised mounting... 7 Devices flush mounting... 17 Accessories... 22 Technical Data... 25 Typical
General_technical_data Series
Indicator Lens Actuator Cable 2-poles with plug-in connection 2.8 x 0.8 mm Flat plug-in housing rectangular, AMP No. 626 057-0 Receptacle housing AMP No. 626 0-0 Receptacle socket AMP No. 160 655-2 Wire
Page 12-2 Page Page Page DC FUSES FOR PHOTOVOLTAIC APPLICATIONS 10x38mm, IEC class gpv Rated current: 20A Rated voltage: 1000VDC.
Page -2 Page -2 AC FUSE HOLDERS Version without indicator: 1P, 1P+N, 2P, 3P, 3P+N Version with indicator: 1P For fuses x38, 14x51 and 22x58mm IEC class gg or am. IEC rated current: 32A, 50A, 0A IEC rated
Sola/Hevi-Duty S3K Series Mini-Tower UPS
Sola/Hevi-Duty S3K Series Mini-Tower UPS GUIDE SPECIFICATIONS 700VA to 1600VA 120V models Single - Phase Uninterruptible Power Supply Systems 1.1 SUMMARY 1.0 GENERAL This specification defines the electrical
Data sheet... OMNIMATE Signal - series LM LM 5.00/04/90 3.5SN OR BX
PCB terminal with proven clamping yoke connection at 5.00 and 5.08 mm pitch. Conductor outlet direction 90, 135 and 180. Suitable for conductor cross-sections up to 2.5 mm². 0.13-2.50 mm² (IEC) / 26-14
12 Watt LED Signal Light - Colored LED Warning Light - NEMA 4X - Audible Horn
12 Watt LED Signal Light - Colored LED Warning Light - NEMA 4X - Audible Horn Part #: WAL-TL-1X12W-C-PA Made in the USA The WAL-TL-1X12W-C-PA LED Signal Light with Audible Horn from Larson Electronics
Red Housing Red Housing. for combinations of multi-tone sounders A and/or beacons Q.
Visual Signaling Beacons LED Steady Flashing Beacons Q ➊ Type 4/4X/13 QDS LED Steady-/Flashing beacon size 1-94mm 24 V AC/DC 48 V AC/DC 110/120 V AC 230/240 V AC Red Housing 874 16 405 874 16 408 874 16
Q16 series. Ø16 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING
IND-Q16-17-07 LED INDICATORS DISTINCTIVE FEATURES Secret until lit polycarbonate decals or custom engraving 10 mm colored diffused epoxy lens or 10 mm water clear super bright LEDs (2.8 x 0.8) solder lug/faston
Visual+Audible Signaling
Visual+Audible Signaling Combination Beacons Q + Sounders A Beacons Q Multi-Tone Sounders A Combination Sounders and Beacons Multi-Tone Sounders can be combined with Beacon Q for Visual + Audible Signaling.
Ø64 LOAD BREAK SWITCHES Ø4.5 Ø12 Ø48. Panel Door
Ø64 LOAD BREAK SWITCHES Ø4.5 Ø12 O I II Ø4 Panel Door on to the best GEERAL Contents General IDEX Page o. Technical Data 1 ing Programmes 2 Front 3 Rear 5 Plastic Enclosure Metal Enclosure Accessories
Fuse holders and fuses
Modular size for 10x38, 14x51 and 22x58mm fuses Finger safe - IEC IP20 degree of protection against accidental contact with live parts and with sealable cover for operators safety Version with status indicator
We have a large stock of
We have a large stock of XENON STROBE LIGHTS ROTATING LIGHTS WORK LIGHTS REVERSE LIGHTS LIGHTING KITS DRIVING LIGHTS LIGHT RAILS INDICATOR LIGHTS LIGHTING ACCESSORIES SIGNALS, LIGHTING & BULBS For special
Sola 3000 Guide Specifications
Sola 3000 Guide Specifications CSI 16610 - Static Uninterruptible Power Supply Systems - Sola 3000 Guide Specifications for a 700 to 2200 VA Single - Phase Uninterruptible Power Supply System 1.0 GENERAL
Q SERIES Ø19mm (.748") Panel Mount LED Indicators Distinctive features and specification
Distinctive features and specification Q19_VOY1603R1US Features 19mm panel mounting LED indicator 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs Plated brass bezel finished in bright
Motor Controllers AC Semiconductor Motor Controller Type RSHP Flexy
Controllers AC Semiconductor Controller Type Soft starting and stopping of -phase induction squirrel cage motors Low inrush and reduced vibration during starting User-selected ramping profiles Integral
58kHz AM Deactivator DB104 Instruction Manual V1.0
58kHz AM Deactivator DB104 Instruction Manual V1.0 Copyright 2016, Hangzhou Century Co., Ltd. All rights reserved. Table of Contents 1 System Overview...3 2 Precautions... 4 2.1 Input Voltage...4 2.2 Safety
Industrial Controls. 8WN Signaling Columns.
s Industrial Controls 8WN Signaling Columns www.siemens.co.in 8WN signaling columns 8WN44 Signaling columns, 70mm diameter, modular Selection and ordering data Buzzer elements Version Rated voltage Color
Printview: 2-conductor ground terminal block - Item No.:
2-conductor ground terminal block Item No: 282-07 2-conductor ground terminal block Marking Business data Supplier WAGO Item no 282-07 GTIN / EAN 4044408423 Content Order amount 0 Customer item number
Series AV. Pushbutton Switches NUT O-RING HOW TO ORDER
Pushbutton Switches SPECIFICATIS: BUSHING: 22mm. CTACT RATING: 2A @ 48VDC or 125VAC. ELECTRICAL LIFE: 10,000cycles at full load. CTACT RESISTANCE: 10m-ohms max. initial @2-4VDC. INSULATI RESISTANCE: 1,000M-ohms
Hour Meter Series HM36
Robust design with high degree of Accuracy and Compact size Frequency independent for AC applications Indicates operating time in hours and tenths with running indicators Totally sealed from Dust and Moisture
Climatic proofing Damp heat, constant, to IEC Damp heat, cyclic, to IEC mm
DATASHEET - M22-L-W Delivery program Indicator light, flush, white Part no. M22-L-W Catalog No. 216771 Eaton Catalog No. M22-L-WQ EL-Nummer 4355332 (Norway) Product range RMQ-Titan Basic function Indicator
EMUJC Series. Electronic actuator. Technical Data Sheet. WattsIndustries.com
EMUJC Series Electronic actuator Technical Data Sheet WattsIndustries.com Description Watts Water Technologies, Inc. The actuator EMUJC Series is an electronic device with 3-point or proportional control
Clearwater Tech - Phone: Fax: Web: -
Accessories Bus cables PROFIBUS-PA cables Straight version PROFIBUS-PA Ex i cables Straight version TM-I marker sleeve TM-I marker sleeve Designation Type Order No. Industrial zone PROFIBUS-PA cable One
SAFE & SECURE ACTUATOR PRODUCT MANUAL
INDELAC CONTROLS SAFE & SECURE ACTUATOR PRODUCT MANUAL Product Description: The Safe & Secure Series Actuator is a quarter turn Open/Close Actuator with Battery Backup Power ALL IN ONE! No more mounting
Rated load current (resistive load) SRP. Min. 0.9 (max. 25 of difference between voltage phase and current phase)
SRPH1 Series Single Phase, Analog Input Type SSR Features Power control/ Cycle control/phase control (fixed cycle/ variable cycle) are available with 4-mA analog input Superior dielectric strength : 4,000VAC
SLIM LINE FUME HOOD MONITOR
SLIM LINE FUME HOOD MONITOR Phoenix Controls FHM420 Fume Hood Monitor is sized to fit any fume hood and includes icons for simple and universal operation. The FHM420 slim line monitor works in conjunction
Series IZS31. RoHS compliant
Ionizer 3 types of the sensors are available. Autobalance sensor [High-precision type] Adjusts ion balance near the workpiece to reduce any interference! New Autobalance sensor [Body-mounting type] Rapid
SOLID STATE BUZZER ABSOLUTE CONTROL
TM TEKMEC SOLID STATE BUZZER ABSOLUTE CONTROL TEKMEC TM PERFECTION C O M M I T M E N T PCMS M3111204IN (AN ISO 9001:2008 CERTIFIED COMPANY) CONTROLLING DEVICES SIGNALLING DEVICES Ø22.5MM CONTROL & SIGNALLING
Uninterruptible Power Supplies
SDU Series, Direct Current Uninterruptible Power Supply (DC UPS) System The SDU DIN Rail DC UPS is an advanced uninterruptible power system that combines an industry leading design with a wide operational
HMI Components. Series. LED-Indicator. Machinery and Automation Panel building Laboratory and measuring equipment. Raised design
Edition 07 / 2016 HMI Components 17 Series Characteristics The Series 17 indicator range comprises 6 mm to 22.5 mm components which are especially suited for: Raised design The large variety of front designs
LB LOAD BANK MANUAL CONTAINS OPERATING INSTRUCTIONS PARTS LIST WIRING DIAGRAMS SERVICE INSTRUCTIONS
LB-60-30 LOAD BANK MANUAL CONTAINS OPERATING INSTRUCTIONS PARTS LIST WIRING DIAGRAMS SERVICE INSTRUCTIONS 4031 W Kiehnau Ave Milwaukee, WI 53209 CAUTION THIS LOAD BANK IS DESIGNED FOR THE TESTING AND SERVICING
IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary
IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Distinctive features and specifications UG1410A Momentary pushbutton (NO) 5 million cycles Low behind-panel depth Standard and high
Think Automation and beyond... Focused brightness and visibility. IDEC LD6A LED Signalight Towers
Think Automation and beyond... Focused brightness and visibility IDEC LD6A LED Signalight Towers LD6A Signalight Towers Ergonomically designed for instant visual & audible recognition LD6A SignaLights
ABL Series. Relay Terminal Block (Screwless Type) Features
ABL Series Relay Terminal Block (Screwless Type) Features Input (NPN, PNP common) and Output (Independent, Common) Selection with Jumper Bars Allows switching between NPN common and PNP common inputs by
Signaling Lights LD6A. LD6A LED SignaLight Towers Assembled Products. Unique Striped Design Improves Visibility
Unique Striped Design Improves Visibility Key features of the LD6A LED SignaLight Towers include: The striped design with non-illuminated area between the lenses makes the illuminated color very visible.
DIN Rail UPS Model: DIN-UPS Installation/Operation Manual
DIN Rail UPS Model: DIN-UPS 24-10 Installation/Operation Manual Table of Contents Section Page Section Page Quick Start 2 1) General Information 4 Materials Provided 4 Optional Equipment 4 2) Safety Information
celpac Solid State Relays & Contactors SAL/SAM Accessories for celpac A large range of heatsinks The 22,5mm pitch SSR solution!
All technical charateristics are subject to change without previous notice - PLAQCELPAC2UK - eptember 2014 Accessories for A A8 : Designed for most types of loads witching voltage (for A and U ranges)
sensors SA1C-F High-speed Fiber Optic: SA1C-F
High-speed Fiber Optic: Key features: Ideal for remote sensing applications Featuring quick-connect cable and easy-insert fiber optic units for simple installation Through-beam and reflected-light sensing
S 470. ASSEMBLED STACK LIGHTS Ø 70mm
S 470 ASSEMBLED STACK LIGHTS Ø 70mm stack light compact and assembled the right solution for warehouse management and facilitate orders available pre-assembled with wires or connector M12, a great advantage
Series ZSE30/ISE30. High Precision, 2-color Display Digital Pressure Switch. With One-touch fittings are newly introduced. PSE
High Precision, 2-color Display Digital Pressure Switch Series SE30/ISE30 SE ISE PSE I SE3 PS I SE 1 2 SP ISA2 IS SM PF2 IF Data With One-touch fittings are newly introduced. Straight type Elbow type 16-2-1
Control & Signalling Devices 22.5 mm. RoHS. Compliant
Control & Signalling Devices 22.5 mm RoHS Compliant Contents Characteristics General Characteristics Products Push Buttons, Selector Switches, Latching Mushroom Head Push Buttons, Pilot Lights & Illuminated
HMI Components. Series. Indicator Illuminated pushbutton Mushroom-head pushbutton Key lock switch
Edition 10/2016 HMI Components Series Characteristics The compact Series is especially suited for: Flush design The large rectangular design (24x36mm) features a large illuminated area. Functions The Series
Q19 series. Ø19 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING
IND-Q19-17-07 LED INDICATORS DISTINCTIVE FEATURES 10 mm colored diffused epoxy lens or 10 mm water clear super bright LEDs Prominent and flush bezel styles (2.8 x 0.8) solder lug/faston terminals, pins
Datasheet. BL/SL 5.08 series BLF 5.08/02/180 SN OR BX
Just as reliable as the tried-and-tested original, with innovation in detail: the BLF 5.08 the PUSH-IN version of the BLZ 5.08 female header features a new connection system and a more compact design.
POWER SUPPLIES. Control Transformers p8-1 Modular Power Supplies p8-2 Switching Power Supplies p8-3 Automatic Battery Chargers p PAGE
8 POWER SUPPLIES Control Transformers p8-1 Modular Power Supplies p8-2 Switching Power Supplies p8-3 Automatic Battery Chargers p8-10 Perth (08) 9248 0410 Sydney (02) 9676 1671 Melbourne (03) 9706 4599
APEM. LPI series. Tactile pushbutton switches with large actuator. Ø 35 mm actuator
APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator Distinctive features and applications Common features
RE48AML12MW time delay relay 2 functions s..300 h V AC - 2 OC
Characteristics time delay relay 2 functions - 0.02 s..300 h - 24..240 V AC - 2 OC Complementary Product front plate size Control type Housing material Main Range of product Product or component type Electrical
Sealed Enclosures. Contact Blocks. Multiple Actuators
Contact Blocks Both N/O & N/C contact blocks and combinations of each are available for the Standard and Heavy Duty ranges of Emergency Stop Switches. Sealed Enclosures All Standard and Heavy Duty range
Indicators reveal the sort of an abnormal condition. Emitter Emitting Controller Power indicator
AREA SENSOR SERIES mm Beam Pitch NA1-5 NA2 SF1-F NA40 SF1-N SF1-A Slim Body Fail-safe esign For General Use Supreme Fail-safe esign The system always check there is no internal circuit, no cable breakage,
2: A, B 3: A, B, Z 4: A, A _, B, B _ 6: A, A _, B, B _, Z, Z _
Diameter mm Shaft Type/Hollow Type/Built-In Type Incremental Rotary Encoder Features Diameter mm flange type Suitable for measuring angle, position, revolution, speed, acceleration and distance Power supply:
XL/127-PLAST-SL - VERTICAL LEVEL GAUGES 5 WITH MIN LEVEL ELECTRICAL SIGNAL
XL/127-PLAST-SL - VERTICAL LEVEL GAUGES 5 WITH MIN LEVEL ELECTRICAL SIGNAL -Thermoplastic level gauges made of transparent polyamide with good mechanical resistance, are compatible with mineral oil, gasoline,
1. INTRODUCTION SYSTEM DESCRIPTION Front Panel CONNECTION AND OPERATION TROUBLESHOOTING...8
Contents : 1. INTRODUCTION...1 2. IMPORTANT SAFETY INSTRUCTIONS...2 3. SYSTEM DESCRIPTION...4 3.1 Front Panel...4 4. CONNECTION AND OPERATION...6 5. TROUBLESHOOTING...8 6. MAINTENANCE...9 6.1 Operation...9
Protistor size 14x51 ar 690VAC (IEC) / 700VAC (UL)
690VAC (IEC) / VAC (UL) Protistor size 14x51 ar 690VAC (IEC) / VAC (UL) SEMICONDUCTOR PROTECTION FUSES IEC HIGH-SPEED CYLINDRICAL FUSE-LINKS AC PROTECTION FEATURES & BENEFITS Low l²t for improved semiconductor
Cooling Fans MU Series 119 mm 38 mm Thick ( 4.69 in. 1. in. Thick) Ambient Temperature: 1 + C (+14 +14 F) Operating Voltage Range: ±1% Materials Frame: Die Cast Aluminum Blades: Polycarbonate (Flammability
Emergency stops Award winning design
Emergency stops Award winning design Emergency stops Choosing the right emergency stop device is vital in order to increase the safety for your personnel and equipment. ABB has a very wide range of emergency
Table of Contents. 22mm Push Buttons. 30mm Metal Push Buttons. 22mm Plastic Enclosures, Control Boxes & Installation Instructions 30-35
Altech Corporation Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced staff
DIN Rail UPS DC UPS/Battery Detection System Model: BDS-DIN-UPS Installation/Operation Manual
DIN Rail UPS DC UPS/Battery Detection System Model: BDS-DIN-UPS 24-10 Installation/Operation Manual Table of Contents Section Page Section Page Quick Start 2 1) General Information 4 Materials Provided
韩国 Autonics 进口固态继电器型号模拟固态继电器 SRPH1 SRPH1 Series SSR 比例控制继电器选型说明书 pdf Single phase, Analog input type SSR Features Power control/ Cycle control/phase c
Series Single phase, Analog input type SSR Features Power control/ Cycle control/phase control (fixed cycle/ variable cycle) are available with 4-mA analog input Superior dielectric strength : 4,000VAC
CP-8301-xxx Series. Application. Features. Applicable Literature. 1 to 15 Vdc Input Electronic Actuator Drive General Instructions
CP-80-xxx Series to 5 Vdc Input Electronic General Instructions Application The CP-80-xxx Series electronic actuator drive is designed to process a variable to 5 Vdc signal from a controller to provide
TABLE OF CONTENTS. Push Button and Rocker Switches Pag. 4. Signal Lights and Lenses Pag. 14. Pressure Switches Pag. 24
1 TABLE OF CONTENTS Push Button and Rocker Switches Pag. 4 Signal Lights and Lenses Pag. 14 Pressure Switches Pag. 24 2 Push button and Rocker Switches 3 Switches Push button SERIES L4 L4 Bowl L4 Rubber
IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Overview IHS SERIES Actuator shapes Electrical function Operating force Termi
IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Distinctive features and specifications Momentary pushbutton (NO) 5 million cycles Low behind-panel depth Standard and high actuator
EcoSystem Dimming Power Module for 3-wire Lutron Dimming Ballasts. EcoSystem One-Line. EcoSystem C5-BMJ-16A. EcoSystem Dimming Module
Dimming Power Module for 3-wire Lutron Dimming Ballasts The Lutron dimming power module allows integration of Lutron 3-wire phase controlled dimming ballasts into Lutron bus supplies (Eco-10 and Hi-lume
1SVC F SVC F 0607 R100.20/30 R100.45
SIGMASWITCH Content Solid state relays Description, certificates, approvals... 163 Ordering details... 164 Technical data R111, R12x... 167 Technical data R100... 168 Technical data HDS R2... 169 Selection
Datasheet. System pitch mm (0.400 inch) - SU/BU BUZ 10.16HP/02/180F AG BK BX
High-performance female connector with the tried-and-tested, guaranteed zero-maintenance, Weidmüller steel clamping yoke. Side-by-side mounting without losing any poles or with patented multifunction flange
Safety Products. Safety Products. HS5E Series. HS5E Series Miniature Solenoid Locking Switch
HS5E Series HS5E Series Miniature Solenoid Locking Switch HS5E Key features include: World s smallest 4 contact solenoid interlock switch. (35 40 46 mm.) Four contacts. Gold-plated contacts. Spring lock
Suppression Technology Valve Suppressors - special function
Energy reducer, design A (18 mm), PUR cable Energy reduction approx. 50 %, protection device, LED status indication 0 180 field installation, open cable end Energy reducer Length of connecting lead (M)
Choose the future Choose
Choose the future Choose PEDCALL AND AUDIO TACTILE SYSTEM Robust design Auto pedestrian detection Vandal resistant Proven field performance Safe The BRAUMS Pedestrian (Push Button) Detector (PEDCALL) and
FLASHERS & TOWER LIGHTING CONTROLS
FLASHERS & TOWER LIGHTING CONTROLS Flashers for incandescent or LED lighting used with both alternating and non-alternating applications in the signaling, communications, and advertising industries. FAA
BS EN Natural. (Orange for Non-sheathed) (Red & Black) or (Brown & Blue) (Red, Yellow, Blue) or (Brown, Black, Grey)
LOW SMOKE HALOGEN FREE (LSHF) FIRE RESISTANT CABLES Voltage Rating (Uo/U) : /0V, /7V or 00/00V Standards Complied Main Specification Fire Tests Flame Retardant Test Test on Acid Gas Evolved Smoke Density
For Info: Phone: Fax:
Page -2 TWO POLES IEC rated current Ith: 20A (AC1) IEC operational power: 1.3kW (AC3 230V) Ideal for domestic applications. Page -2 THREE AND FOUR POLES IEC rated current Ith: 25A, 40A and 63A (AC1) IEC
HS5E Series Miniature Solenoid Locking Switches
HS5E Series Miniature Solenoid Locking Switches AS-Interface Safety at Work Barriers Enabling Switches Door Interlock Switches X Series E-Stops Overview HS5E features: World s smallest 4 contact solenoid
Indicator Lights (Neon, LED and Filament Lamp)
Indicator ights (Neon, ED and Filament amp) Colours and voltages: Neon Red, Amber, Green, Clear 100/130V (marked 110V), 200/250V (marked 230V) ED Red, Yellow, Green /2.2V Resistors for other voltages available
Power Supplies. SDN-C Compact DIN Rail Series
SDN-C Compact DIN Rail Series The SDN-C DIN rail power supplies are the next generation of the popular SDN series. These models combine high effi ciency and compact size with new visual diagnostic LEDs
4000 Series Buccaneer
Sealed to IP66 IP6 and IP69K when mated IP6 rating tested at 1.054kg/sq cm (15lb/sq in) m depth for 2 weeks, & pole configuration Power ratings up to 1A, 600V Cable range from to 7mm Diameter over coupling
LD6A. LED SignaLight Towers. Clear, audible alarm sound. Warning/caution indicated by flashing light. Complies with IEC Standards (IEC60073)
LD6A LED SignaLight Towers Steady/Flashing/Alarm Warning/caution indicated by flashing light Complies with IEC Standards (IEC073) Clear, audible alarm sound 3.3 khz 70 to 90 db 2 3 4 5 LD6A LED SignaLight
Indicator body single with two independent lamp bases, raised, rectangular, black plastic, screw terminals, without bezel. Part No
Series 03. mm x 4. mm IP40/IP65 0 A 400 VAC Choose one component from each of the coloured sections to assemble a complete switch. For other options or further information please contact your local sales