SOLID STATE BUZZER ABSOLUTE CONTROL

Transcription

1 TM TEKMEC SOLID STATE BUZZER ABSOLUTE CONTROL TEKMEC TM PERFECTION C O M M I T M E N T PCMS M IN (AN ISO 9001:2008 CERTIFIED COMPANY) CONTROLLING DEVICES SIGNALLING DEVICES Ø22.5MM CONTROL & SIGNALLING DEVICES

2 INTRODUCTION TEKMEC make Push Button Switches, Selector Switches and Pilot Lamps are normally suitable for Control & Auxiliary Circuits, A.C. or D.C. backed by years of proven performance in the field.these devices have contact reliability, increased operational safety, compactness and reduced labour input. The availability of two separate models of contact blocks-rear wire connection type for panel mounting application and front wire connection type for base mounted and other features make them an ideal choice for panels, control desks, control stations, machine tools etc. These devices generally comply with the requirement of IS/IEC : (2003). SALIENT FEATURES Very good flame resistance. Interchangeable blocks provide multiple contact configurations at site. Tekmec s traditional hall mark for precision & exacting quality and assurance for consistency & reliability. Safe in operation, locking device unaffected by vibration. Self wiping contacts ensure trouble free operation. State-of-the-art workmanship aesthetic elegance. Tekmec s more than two decades of trust and confidence. Protection against electrical shock (Unit Earthed). Push Buttons & Selector Switches are available in Chrome Plated Metallic body & Bezel as well as in Glass filled thermoplastic body & bezel and are functionally interchangeable. The elements are interchangeable and can be stacked without additional hardware, 1 to 4 element ( or ) can be used with Push Buttons and Selector Switches. For illuminated Push Buttons 1 or 2 element ( or ) may be used. The Pilot Lights and illuminated switches are suitable for direct supply or supply through series resistor, using bayonet cap filament bulb type BA-9S for both AC/DC supply from 6V to 230V. Indicating Lights with switching device and integral LED modules can be directly mounted on panel and rated voltage can be directly applied to the module input. These are available in Standard and barrel type enclosure in Thermoset (DMC) and Thermoplastic housing for AC/DC and AC or DC supply. SIGUT TERMINATION This unique feature is highly safety oriented. It increases safety to the user by preventing accidental contact by the user with live terminals. COMPACT 22.5mm DIAMETER The smaller mounting diameter reduces mounting space by 30% as compared to conventional 30.5mm design. Ø22.5mm E ENERGY SAVER Ø22.5mm devices require lamp with 2/2.6W instead of 7 to10 Watt Lamps used inø30.5mm devices. This results in energy saving. 40 MOUNTING Screw driver is required for fixing these devices on to panelhaving thickness of 1 to 6mm in any position. The whole assembly is locked into position with the help of two M4 pointed screw on the bracket. These screws also ensure the earthing.we recommend fixing centres as per standard. The Screws should be tightened simultaneously to an extent as to pierce through the paint on the panel from inside. 30 E = thickness of mounting panel 1 to 6mm MOUNTING MATRIX

3 TECHNICAL SPECIFICATIONS Conforming to Standards IS / IEC Rated Thermal Current Rated Insulation Voltage Degree of Protection Conforming to IEC 529 Mechanical Life Short Circuit Protection Rated Power Ambient Temperature Vibration Resistance Shock Resistance Contact Operation ResistanceacrossTerminals Operating Force 0 10AconformingtoIS/ IEC , UL508, CSAC22-2n 14, VDE VDC conforming to IS/IEC , 600V conforming to UL 508 and CSA C 22-2 n 14. IP 65 : Flush and Projecting, illuminated Push Buttons (mounted). IP 66 : Booted and Mushroom Head Pushbuttons, Selector Switches, Pilot Lights. Double headed push buttons. Without pilot light : IP 40 or IP 65. With pilot light : IP 40 (IP 65 with boot). 1 million operations (latching mushroom head push buttons : operations). 10A cartridge fuses type g1 or N conforming to IS/IEC , utilization categories AC15 and DC13. Operating rate : 3600 operations/hour. Load factor : Operation : -25 C to +40 C. Storage : -40 C to + 70 C. 60mm mushroom head pushbuttons : 8g. Other pushbuttons : 15g. (40 Hz < frequency < 500 Hz) Pushbuttons : 70g. Mushroom Head Pushbuttons : 15g. Selector Switches : 200g. Conforming to IEC Slow break N/C or N/O. <25 m W conforming to NF C method A or IEC category 3. Flush and Projecting Pushbuttons-with 1 N/O Contact: 1daN-with 1 N/C Contact: 0.8 dan. Additional Contacts - N/O:+0,5 dan - N/C:+0,3 dan. ACCESSORIES AND SPARES Adoptor Ring Bulb Extractor Filament Bulb Pilot Light Lens Pilot Light Lens Assy. Illuminated Push Button Lens Assy. Protective Boot Pad Lock Legend Plate Standard Inscription Available For assembly of Ø22.5mm in Ø30.5mm hole. CAT No. 9XTADP. To remove or fit the bulb from front. CAT No. 9XTBPE. Filament Bulbs type BA-9S with OAL 28mm max. CAT No. 9XTBLB. Unbreakable Polycarbonate Lens CAT No. 9XTILP. VOLTAGE WATTS Lens Holder assembly with Polycarbonate Lens CAT No.9XTIL-CP Lens Holder assembly with polycarbonate Lens & Ring CAT No. 9XTILST-CP. For Booted Actuator, oil and water tight seal for IP 65 CAT No. 9XTABB. For Mushroom Actuator CAT No. 9XTAM-PD and for Projecting Actuator CAT No. 9XTAP-PD. Standard inscription available CAT No. 9XT-IP. IH SLOW ON FAST OFF FORWARD OPEN REVERSE CLOSE START UP STOP DOWN RESET Legend Plate 60mm yellow with black characters for Emergency Stop.

4 SELECTION CHART PRODUCT TYPE DESCRIPTION COLOUR REFEREE FLUSH BUTTON 9XTAF-1 9XTAF-2 9XTAF-3 9XTAF-4 9XTAF-6 9XTAF-8 DIMENSION (In mm) PROJECTING BUTTON 9XTAP-2 9XTAP-3 9XTAP-4 9XTAP-6 9XTAP-8 PROJECTING BUTTON Push to On Push to Off 9XTAPPN-3 9XTAPPN-4 9XTAPPN-2 BOOTED BUTTON For Flush Actuator 9XTAB-2 9XTAB-3 9XTAB-4 9XTAB-6 9XTAB-8 MUSHROOM BUTTON (HEAD Ø40mm) WITH PADLOCKING DEVICE 9XTAM-2 9XTAM-3 9XTAM-4 9XTAM-PD MUSHROOM STAYPUT BUTTON (HEAD Ø40mm) Press to Lock & Turn to Reset WITH PADLOCKING DEVICE STAYPUT (HEAD Ø30mm) 9XTAPR-3 9XTAPR-4 9XTAPR-PD 9XTAPR-S TWIN BUTTON with Green Knob marked I & Red Knob marked O 9XTADB-3 9XTADB-4 LUMIUSTWIN BUTTON SPRING RETURN With Green Knob markedi& RedKnob markedowith Lamp Holderwith BA9Sbulb 2.6W & with ClusterLED 9XTADBLSTR-3 9XTADBLSTR-4 9XTADBLST-3 9XTADBLST-4 RELAY RESET BUTTON Projecting Button Flush Button 9XTAP-RR 9XTAF-RR MUSHROOM HEAD KEY LOCKABLE ACTUATOR KEY REMOVABLE IN : Pressed (Actuated) Position Unpressed (Unactuated) Position Pressed & Unpressed Position Press to Lock, Key to Reset 9XTAK-1L 9XTAK-2L 9XTAK-3L 9XTAK-PL

5 SELECTION CHART PRODUCT TYPE DESCRIPTION COLOUR REFEREE DIMENSION (In mm) SELECTOR MAINTAINED Two Position Three Position 9XTA-2S 9XTA-3S KEY SELECTOR TWO POSITION MAINTAINED KEY REMOVABLE IN : Right Position Left Position Right & Left Position 9XTA1-2CL 9XTA2-2CL 9XTA3-2CL KEY SELECTOR THREE POSITION MAINTAINED KEY REMOVABLE IN : Right & Left Position Center Off Left, Center and Right Position Center Position Only 9XTA4-3CL 9XTA5-3CL 9XTA6-3CL TWO POSITION Left to right without Lock Left to Right With Lock, Key removable in Right Position 9XTAS-1 9XTAS-1A TWO POSITION Right to Left Without Lock Right to Left With Lock, Key removable in Left Position 9XTAS-2 9XTAS-2A THREE POSITION Left to Center maintained on Right All Contacts open in Center position Without Lock, With Lock Key removable in Center position 9XVAS-3 9XVAS-3A THREE POSITION Right to Center Maintained on Left All Contacts open in Center position Without Lock, With Lock Key removable in Center position 9XTAS-4 9XTAS-4A THREE POSITION Left to Center & Right to Center All Contacts open in Center position Without Lock, With Lock Key removable in Center position 9XTAS-5 9XTAS-5A LUMIUS BUTTON SPRING RETURN with Lamp Holder with Bulb BA9S 2.6W with polycarbonate Lense, but without Contact Element 9XTALSTR 9XTALST LUMIUS 2/3 POS. SELECTOR with Lamp Holder, TWO POSITION with polycarbonate lense, with Bulb, but without Contact Element THREE POSITION CLEAR 9XTA2SILR 9XTA2SIL 9XTA3SILR 9XTA3SIL

6 SELECTION CHART PRODUCT TYPE DESCRIPTION COLOUR REFEREE DIMENSION (In mm) -- PILOT LIGHT Lamp Holder with Bulb BA9S 2.6W With Series Resistance For direct connection upto 130V supply CLEAR 9XTILR 9XTIL LED STANDARD INDICATING LIGHT -- WITH CLUSTER/CHIP LED AND INTEGRAL CIRCUIT suitable for 220V,110V,48V, 24V,12V AC/DC supply 9XTLDIL-S LED MULTI VOLTAGE INDICATING LIGHT- IN STANDARD/BARREL HOUSING WITH CLUSTER/CHIP LED suitable for 24V To 220V AC/DC supply 9XTLDIL-U 9XTLDIL-BN-U LED BARREL INDICATING LIGHT WITH CLUSTER/CHIP LED AND INTEGRAL CIRCUIT suitable for 220V,110V,48V, 24V, 12V AC/DC supply 9XTLDIL-BN BLOCKS REAR CONNECTION Normally Open () Normally Closed () T1 T2 BLOCKS FRONT CONNECTION Normally Open () Normally Closed () T3 T4 LUMIUS 2/3 POS. SELECTOR in Thermoplastic Housing and Polycarbonate lense with CLUSTER/CHIP LED and integral circuit suitable for 220V,110V,48V, 24V AC/DC supply CLEAR 9XTLD2SL 9XTLD3SL LUMIUS BUTTON SPRING RETURN suitable for 220V,110V,48V, 24VAC/DC supply 9XTLDLST TEKMEC TM The widest range Tekmec Switchgear & Controls (AN ISO 9001:2008 CERTIFIED COMPANY ) 483, Oberoi Compound, Dilshad Garden Indl. Area G. T. Road Delhi India. PH : , sales@tekmec.co.in Website :