Years. ... made by FORK-LIFT TRUCK ATTACHMENTS ENVIRONMENT-STORAGE HAZARDOUS MATERIALS CONTAINERS RECYCLING BANKS

Transcription

1 40 Years INNOVATION - CONSTRUCTION - PRODUCTION FORK-LIFT TRUCK ATTACHMENTS ENVIRONMENT-STORAGE HAZARDOUS MATERIALS CONTAINERS RECYCLING BANKS... made by

2 WHO ARE WE? WHO ARE WE? The Management (from the left) Heinz Dieter Bauer, Patrick Bauer (Executive Managing Directors) Harald Szudrowicz (Director Sales) Thomas Schmidt (Director Administration) WHO In 1966 the company was established by Heinz Dieter Bauer, Executive Managing Director, starting off as a one-man business. It is under his leadership that Bauer GmbH has developed into one of the most important manufacturers with more than 200 employees. ARE The company originally had a production floorage area of m 2 and has today m 2 in total; of which at present m 2 are under cover. Initially Bauer manufactured mostly transport equipment, specializing in attachments for the fork-lift truck as of In 1985 the first products for the environmental protection sector were manufactured. WE? In answer to the high demand for Bauer products a second production site was opened in Halberstadt (Sachsen-Anhalt) in The beginning of 2001 saw the inauguration of another paint shop and the Logistic Centre, both important markers pointing to the future. 2

3 INDEX INDEX INDEX FORK-LIFT TRUCK ATTACHMENTS ENVIRONMENT-STORAGE HAZARDOUS MATERIALS CONTAINERS Tilting Containers 13-23, 28 Retention Basins 69-87, Special Waste Containers , Containers with Drop Away Base 24-27, 28 Drum Shelves Used Battery Containers 121 Barrow Tipper 29 Shelves for Small Cans 93 Transport Pallet 121 Swarf Containers Gas Cylinder Containers Fluorescent Tube Box 122 Silo Containers Protection Container ZERO-Box 101 Duo Container 127 Filling Hoppers 35 Shelving Basins 102 Tank Container 128 Collecting System 36 Pallet Shelves 103 Collecting Container 129 Tippers 37 Heating Chambers 104 MobiCont Broom / Weather Protection 38 Depot Containers 105 Mobile Filling Stations Shovels Shelf Containers Individual Constructions 138 Snow Clearing Equipment Access Safety Platforms Extensible Crane Arms 46 Crane Hooks 47 Tipping Equipment Transport Equipment Useful Equipment Fork Extensions 54 Battery Charging Station 55 Drum Handling Equipment Castors 66 Shelf Container Installations Safety Cubicles 110 F90 Fire-Protection Containers Collecting Points Individual Constructions 116 RECYCLING BANKS SECOMAT Glass Containers Paper Containers Used Clothes Containers Collecting Containers GeoTainer Comfort GeoTainer Underground Underground Location for Waste Bins Mini-Container System If you would like to get information about these products, please contact us. 3 We reserve the right to make technical amendments

4 THE COMPANY Administration Section THE THE COMPANY COMPANY Main Site in Südlohn The Bauer GmbH has been successful in several sectors - attachments for the fork-lift truck, products for the environmental protection sector and storage systems - for a considerable number of years. Bauer s activities include both development and manufacture of these products and of course sales on a world-wide scale. Close observation of the market and high standards where quality is concerned these are two of the factors that have helped Bauer become one of the leading manufacturers in this field. In 1993 the company was certified for the first time according to DIN EN ISO 9001:2000; the implementation of this quality assurance management system guarantees high standards. In addition the company is a registered specialist company according to the German Wasserhaushaltsgesetz 19 I - the law governing the protection of ground water. Bauer products are only manufactured in Südlohn, where the main administration section is or in Halberstadt. The high standard achieved this incidentally refers to the level of safety as well as the quality of the products can only be maintained with the help of qualified personnel and by using the most modern manufacturing technology available. Our standard is made to measure and innovative in the name of the environment are two mottos that reflect the Bauer philosophy in day-to-day business. Ideas and special requests from customers are processed by an in-house construction department using the most advanced CAD-systems; this means ideas can be put into practice at short notice. Numerous licences show the innovative power generated by Bauer GmbH. Manufacturing is extremely efficient and thanks to the Logistic Centre lead times can be kept short. 4

5 INNOVATION CONSTRUCTION PRODUCTION FOR YEARS Werner Beyer, Managing Director in Halberstadt 5

6 THE MANUFACTURING PROCESS THE MANUFACTURING PROCESS MANUFACTURING PROCESS Bauer GmbH proves that the common idea i.e. that modernisation in production destroys jobs, is wrong. Attractive jobs can be secured and or indeed created for this location if modern technology is integrated sensibly in manufacturing processes. Bearing in mind the level of competition on the international market today, it is imperative to be able to guarantee a high standard and short lead times in order even to exist. These two targets can only be reached with the help of a polished manufacturing process. The first step is taken by qualified employees using computer-operated presses and laser-cutting machinery for the manufacture of highly accurate components. This is a must in order for the ensuing automation process to be effective. The parameters for the welding robots must be clearly defined in order to guarantee an optimized function; this of course means all preparations must be made with great care and precision. Whether we are talking about components or finished products, standard specification or individual construction in steel, stainless or aluminium, the manufacturing process at Bauer GmbH is highly effective and flexible. Technical inspections are carried out at regular intervals by the German TÜV. 6

7 THE PRODUCT RANGE THE PRODUCT RANGE THE PRODUCT RANGE DIBt BAM Attachments for the Fork-Lift Truck This range covers a variety of products that can be picked up using the forks of a fork-lift truck e.g. tilting containers, shovels, snow clearing equipment, access safety platforms, drum lifters etc. to name but a few. The basic idea behind this range of products is to be able to use the fork-lift truck for as many different purposes as possible. Products for the Environmental Protection Sector This range of products has developed at an incredible pace during the course of the last few years; one reason for this development is the everincreasing demand for more stringent regulations to protect our environment. In the course of globalization this demand will continue to gain importance. The products range from retention basins to special waste containers suitable for the international transport of hazardous materials either as a solid, paste-like substance or as a liquid. Storage Systems for the Protection of the Environment This range covers products (in accordance with the relevant legislation) which can be used for the safe storage of materials that pose a threat to the environment this applies to both indoor and outdoor storage. A good example for this product range is an F90 fireproof container. As the name indicates this type of container is fireproof from inside and outside for a period of 90 minutes, shelving cabinets, heating chambers, safety cupboards, so-called collection points, shelving basins etc. 7

8 INNOVATION INNOVATION INNOVATION Innovations are treated as a top priority at Bauer GmbH. The development of new products is an on-going process to meet the demands of the client and the existing market and of course to create new markets. One factor that plays an extremely important role from the technical point of view is the consideration of national and international legislation relating to the protection of the environment and health and safety at work. Feasibility studies are carried out to establish whether these requirements can be met. Prototypes are made in order to physically test those functions which cannot be tested on the computer screen. Numerous products still have to pass an independent authority or official body before being approved for use. Production can only begin once these hurdles have been cleared. The implementation of innovative techniques is important for the employees in both manufacturing and in the sales section; the potential of a particular product must be recognized and put into practice without delay. 8

9 MARKETING & SALES MARKETING & SALES MARKETING & SALLES The Logistic Centre has a floorage area of 4600 m 2 and has helped not only to optimize logistic processes but also to meet the increasing demand for more flexible lead times now it is possible to sell some products directly from the warehouse. Interest in Bauer products is not restricted to a particular business sector this is due to both the nature of the products and their diversification. Effective marketing activities and sales operations are a must if the various target groups are to be reached and well looked after. There are sales consultants with internal and external duties so the customer is never really far away. This proximity means that any situation the customer may have to deal with can be analysed and a suitable solution for this application can be offered. There is a special project team for the range Storage Systems since this is an extremely complex issue. The importance of being close to the customer is reflected in the way in which Bauer GmbH structures international sales; Bauer Nederland B.V. takes care of the needs of our neighbours in the Netherlands whilst company representatives operate in Switzerland and Austria. Other international activities include cooperation with various companies who sell Bauer products. Of course Bauer GmbH is on the internet; the homepage is set up in different languages as are the printed catalogues. 9

10 CUSTOMER SERVICE Bauer GmbH does not consider itself to be just a manufacturer of innovative products. One of the main aims of the company is to offer solutions to problems relating to the use of a fork-lift truck and to the environmental protection sector. Years of experience, qualified personnel and a high level of technology are three important factors that make Bauer a competent partner. CUSTOMER SERVICE CUSTOMER SERVICE We are waiting for you to challenge us. If you require our assistance, please contact us so we can arrange an appointment with one of our sales consultants, alternatively come and visit us in Südlohn! Together we can find a solution for your situation and you can see for yourself that Bauer GmbH is a good choice. Our standard is made to measure 10

11 FA CINATING SOLUTIONS... Tilting Containers 13-23, 28 Containers with Drop Away Base 24-27, 28 Barrow Tipper 29 Swarf Containers Silo Containers Filling Hoppers 35 Collecting System 36 Tippers 37 Broom / Weather Protection 38 Shovels Snow Clearing Equipment Access Safety Platforms Extensible Crane Arms 46 Crane Hooks 47 Tipping Equipment Transport Equipment Useful Equipment Fork Extensions 54 Battery Charging Station 55 Drum Handling Equipment Castors 66 FORK-LIFT TRUCK ATTACHMENTS 11

12 AROUND THE FORK-LIFT TRUCK AROUND THE FORK-LIFT TRUCK Fork-Lift Truck Attachments - Standard in mechanical or hydraulic executions - Steel and stainless steel - Individual constructions We ve sold more than fork-lift truck attachments around the world UVV SUVA TÜV WIEN PRODUCT FINISHES We only use environmental friendly paints, i.e. lead- and chromate-free. Made to measure This catalogue shows just a part of our diversified manufacturing programme. A good deal of our products are actually individual constructions. 12 Our standard colours are: red RAL 3000 green RAL 6011 grey RAL 7005 The above colour samples are only for orientation and cannot present the exact RAL colours. hot-dip galvanized in compliance with EN ISO 1461 Also available on request: sand blasted coatings / linings Whatever requirements you may have concerning design and construction - just ask us! Our standard is made to measure

13 TILTING CONTAINER TYPE GU Volume 0,3-1,5 m 3 Type GU The Original with low structural height and an ideal dumping angle can be emptied at any height by cable operated from the driver s seat body wall with reinforced edging sturdy frame with fork sleeves can be secured to prevent slipping wheels can be fitted later red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized in compliance with standard EN ISO 1461 TILTING CONTAINER Type GU in emptying position Type GU galvanized with wheels 2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake - construction height 220 mm and handle galvanized hinged 2-part lid, can be opened from both sides suitable for crane, lever trolley, pallet truck or bale gripper trailer and towing bar welding, oil- and watertight adjustable dumping brake This accessory helps to control the tilting process, reduces noise and is easy on the fork-lift. It can be mounted later if required (kit form available), for GU 500 size upwards. hydraulic tilting aid Individual construction on request e. g. stainless steel Type GU with lid Adjustable dumping brake Type Volume Dimensions Load capacity Weight (approx.) in m 3 in mm (l x w x h) in kg painted in kg GU 300 0, x 680 x GU 500 0, x 780 x GU 750 0, x 1280 x GU , x 1280 x GU , x 1280 x Fork sleeve inside dimensions in mm Other dimensions possible Type A B C GU GU GU

14 TILTING CONTAINER TILTING CONTAINER TYPE BK Type BK Volume 0,3-2,0 m 3 The Original with rolling mechanism ideally situated loading centre of gravity can be emptied at any height by cable operated from the driver s seat body wall with reinforced edging sturdy frame with fork sleeves can be secured to prevent slipping and unintentional emptying wheels can be fitted later red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized in compliance with standard EN ISO Type BK with lid Type BK galvanized Type BK in tilting position Type Volume Dimensions Load capacity Weight (approx.) in m 3 in mm (l x w x h) in kg painted in kg BK 30 0, x 850 x BK 50 0, x 850 x BK 60 0, x 950 x BK 70 0, x 1050 x BK 80 0, x 1150 x BK 90 0, x 1250 x BK 100 1, x 1400 x BK 110 1, x 1550 x BK 120 1, x 1650 x BK 130 1, x 1750 x BK 140 1, x 1850 x BK 150 1, x 1950 x BK 160 1, x 2050 x BK 170 1, x 2150 x BK 180 1, x 2250 x BK 190 1, x 2350 x BK 200 2, x 2150 x swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake - construction height 220 mm and handle galvanized hinged 2-part lid, can be opened from both sides suitable for crane, lever trolley or bale gripper trailer and towing bar welding, oil- and watertight Individual construction on request e. g. stainless steel Fork sleeve inside dimensions in mm Other dimensions possible Type A B C BK BK

15 TILTING CONTAINER TYPE NK Type NK Volume 0,3-1,0 m 3 Low structural height and scissor tilting mechanism ideally situated loading centre of gravity can be emptied at any height by cable operated from the driver s seat body wall with reinforced edging sturdy frame with fork sleeves can be secured to prevent slipping and unintentional emptying wheels can be fitted later red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized in compliance with standard EN ISO 1461 TILTING CONTAINER Type NK in emptying position 2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake - construction height 220 mm and handle galvanized hinged 2-part lid, can be opened from both sides suitable for crane, lever trolley or pallet truck welding, oil- and watertight Individual construction on request e. g. stainless steel Fork sleeve inside dimensions in mm Type NK with wheels Type NK with lid Type Volume Dimensions Load capacity Weight (approx.) in m 3 in mm (l x w x h) in kg painted in kg NK 30 0, x 840 x NK 50 0, x 840 x NK 75 0, x 1080 x NK 100 1, x 1430 x Other dimensions possible Type A B C NK NK NK NK Did you know that... All products can be manufactured in stainless steel 15

16 TILTING CONTAINER TYPE AK Volume 0,5-1,0 m 3 Tilting Container with rolling mechanism TILTING CONTAINER ideally situated loading centre of gravity can be emptied at any height by cable operated from the driver s seat body wall with reinforced edging sturdy frame with fork sleeves can be transported with pallet truck can be secured to prevent slipping and unintentional emptying wheels can be fitted later red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized in compliance with standard EN ISO 1461 Type AK galvanized hinged 2-part lid, can be opened from both sides 2 swivel + 2 fixed polyamide, castors Ø 180 mm, one swivel castor with brake - construction height 220 mm welding, oil- and watertight Fork sleeve inside dimensions in mm Typ AK with lid Type AK with wheels 16 Type Volume Dimensions Load capacity Weight (approx.) in m 3 in mm (l x w x h) in kg painted in kg AK 50 0, x 1008 x AK 75 0, x 1190 x AK 100 1, x 1560 x Type A B C AK

17 TILTING CONTAINER TYPE BKC Volume 3,0-5,0 m 3 Type BKC red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized in compliance with standard EN ISO 1461 Large volume skip with side pivot basic size 3,0 m 3 with extensible frame (screwed) to increase volume to 4-5 m 3 can be emptied at any height by cable operated from the driver s seat body wall with reinforced edging sturdy frame with fork sleeves can be secured to prevent slipping with restorer hydraulic tipping aid adjustable dumping brake 2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake, contruction height 220 mm galvanized hinged 2-part lid, can be opened from both sides oil- and watertight TILTING CONTAINER Type BKC in emptying position Individual construction on request e. g. stainless steel Type BKC galvanized, with lid Type BKC galvanized, with hydraulic tipping aid Fork sleeve inside dimensions in mm Other dimensions possible Type BKC with hydraulic tipping aid in individual construction Type Volume Dimensions Load capacity Weight (approx.) in m 3 in mm (l x w x h) in kg painted in kg BKC 300 3, x 2230 x BKC 400 4, x 2230 x BKC 500 5, x 2230 x Type A B C BKC Did you know that... We only use environmental friendly paints, i. e. lead- and chromate-free 17

18 TILTING CONTAINER TYPE BKM Volume 0,3-2,0 m 3 TILTING CONTAINER Type BKM A well proven tilting container with rolling mechanism ideally situated loading centre of gravity can be emptied at any height by cable operated from the driver s seat body wall with reinforced edging sturdy frame with fork sleeves can be secured to prevent slipping and unintentional emptying wheels can be fitted later red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized in compliance with standard EN ISO swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake - construction height 220 mm and handle suitable for crane or lever trolley welding, oil- and watertight galvanized hinged 2-part lid, can be opened from both sides Individual construction on request e. g. stainless steel Type BKM with wheels, pole and trailer coupling Fork sleeve inside dimensions in mm 18 Type BKM in emptying position Type BKM with lid Type Volume Dimensions Load capacity Weight (approx.) in m 3 in mm (l x w x h) in kg painted in kg BKM 30 0, x 820 x BKM 50 0, x 820 x BKM 75 0, x 820 x BKM 100 1, x 1060 x BKM 150 1, x 1560 x BKM 200 2, x 1560 x Other dimensions possible Type A B C BKM BKM BKM Did you know that... We take care of everything technical advice, planning, manufacture

19 TILTING CONTAINER TYPE EXPO Type EXPO Volume 0,3-2,1 m 3 The compact one with rolling mechanism ideally situated loading centre of gravity can be emptied at any height by cable body wall with reinforced edging sturdy frame with fork sleeves can be secured to prevent slipping wheels can be fitted later red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized in compliance with standard EN ISO swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake - construction height 220 mm and handle welding, oil- and watertight TILTING CONTAINER Type EXPO in emptying position Fork sleeve inside dimensions in mm Type EXPO galvanized Type EXPO with wheels Type A B C EXPO EXPO Type Volume Dimensions Load capacity Weight (approx.) in m 3 in mm (l x w x h) in kg painted in kg EXPO 300 0, x 770 x EXPO 600 0, x 1070 x EXPO 900 0, x 1570 x EXPO , x 1070 x EXPO , x 1570 x EXPO , x 1870 x Did you know that... We ve sold more than 350,000 fork-lift truck attachments around the world 19

20 TILTING CONTAINER TYPE DUO/TRIO Volume 2 x 0,9 m 3 or 3 x 0,6 m 3 For economical collection of materials to be recycled or waste products sturdy frame with fork sleeves body wall with reinforced edging arranged for being tipped and tipped back separately can be secured to prevent slipping and unintentional emptying TILTING CONTAINER Type TRIO frame DUO container red RAL 3000 TRIO container orange RAL 3000 red RAL 3000 other colours are available on request Type DUO 2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake galvanized hinged 2-part lid, can be opened from both sides lettering Individual construction on request Fork sleeve inside dimensions in mm Type DUO with lid Type A B C DUO TRIO Type TRIO in emptying position lid can be fixed Type Volume Dimensions Load capacity Weight (approx.) in m 3 in mm (l x w x h) in kg in kg DUO 2 x 0, x 1610 x TRIO 3 x 0, x 1610 x Did you know... We manufacture according to ISO 9001:2000 and use the most modern processing equipment

21 TILTING CONTAINER TYPE RD Volume 0,75 m 3-1,0 m 3 Tilting Container with rounded lid spring-loaded,watertight, galvanized rounded lid with 2 handles body wall with reinforced edging sturdy frame can be emptied at any height by cable operated from the driver s seat can be secured to prevent slipping and unintentional emptying wheels can be fitted later red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized in compliance with standard EN ISO 1461 galvanized lid TILTING CONTAINER Type RD 2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake welding, oil- and watertight adjustable dumping brake for RD 1000 (see page 13) Fork sleeve inside dimensions in mm Type A B C RD RD Type RD, lid stop during emptying Type Volume Dimensions Load capacity Weight (approx.) in m 3 in mm (l x w x h) in kg painted in kg RD 750 0, x 775 x RD , x 975 x Type RD, in action 21

22 STACKING TIPPER TYPE BSK Volume 0,3-2,0 m 3 The Stacking Tipper made of distortionproof steel sheeting for heavy duty use can be stacked when full (3 units) is emptied by cable operated from the driver s seat using the traverse STACKING TIPPER red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized in compliance with standard EN ISO 1461 hinged 2-part lid (stacking NOT possible) castors (stacking NOT possible) welding, oil- and watertight Type BSK with fork-lift traverse type BST removable perforated base sieve and 1 drain-cock crane lifting eyes fork-lift traverse, type BST fork-lift and crane traverse, type BKT hydraulic traverse, type BST-H fork-lift traverse, type BST-U traverse stand Type BST fork-lift traverse Type BKT fork-lift and crane traverse Type BST-H hydraulic traverse Individual construction on request e. g. stainless steel Type BST-U fork-lift traverse Type BSK used to separate waste 22 Type Volume Dimensions Load capacity Weight (approx.) in m 3 in mm (l x w*x h) in kg painted in kg BSK 30 0, x 600 x BSK 55 0, x 800 x BSK 70 0, x 800 x BSK 90 0, x 1000 x BSK 150 1, x 1500 x BSK 200 2, x 2000 x *width not including pick-up cones Type BSK galvanized, with lid

23 UNIVERSAL-CONTAINER TYPE UC Type UC with hydraulic traverse type UCT Volume 0,5 m 3-1,0 m 3 Ideal for collection, transport of bulk goods, production waste and material to be recycled conical construction can be stacked in another (4 units) economical logistics grace to space-saving transport thorough and controlled emptying suitable for pick-up by pallet-, fork-lift truck or crane red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized in compliance with standard EN ISO 1461 UNIVERSAL-CONTAINER Type UC with galvanized lid hydraulic traverse type UCT galvanized lid 2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake - construction height 220 mm Fork sleeve inside dimensions in mm emptying by using a rotator can be stacked in another (4 units) Type A B C UC UCT Type UC using a crane various sizes available Type Volume Dimensions Load capacity Weight (approx.) in m 3 in mm (l x w x h) in kg painted in kg UC 500 0, x 1000 x UC 750 0, x 1000 x UC , x 1000 x UCT 800 x 1365 x

24 CONTAINER WITH DROP AWAY BASE TYPE FB Volume 0,5-2,0 m 3 CONTAINER WITH DROP AWAY BASE Ideal for collecting, storing and transferring of recyclable material sturdy steel construction with plain inner wall cable operated trap door release rubber-suspension damps the impact of the trap door when emptying the container trap door closes automatically can be secured to prevent slipping and unintentional emptying suitable for fork-lift truck and crane 100 mm ground leeway, suitable for pallet truck with 4 crane eyes Ø 40 mm can be stacked (4 units) Type FB with guiding plates and opened trap door red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized in compliance with standard EN ISO 1461 Type FB galvanized Type FB 2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake - construction height 220 mm trap door with guiding plates for precise emptying galvanized hinged 2-part lid, can be opened from both sides Type FB with wheels Type FB with galvanized lid 24 Type Volume Dimensions Load capacity Weight (approx.) in m 3 (l x w x h) in mm in kg painted in kg FB 500 0, x 1200 x FB 750 0, x 1200 x FB , x 1200 x FB , x 1800 x FB , x 1800 x Fork sleeve inside dimensions in mm min. length of forks 1100 mm Type A B C FB FB

25 CONTAINER WITH DROP AWAY BASE TYPE BKB Volume 0,5-1,0 m 3 The economical solution with emptying through trap door conical construction Type BKB being emptied can be stacked in another cable-operated door release trap door closes automatically when skip touches the ground, 90 opening angle sturdy construction with reinforced edging, wall thickness 3 mm, trap-door thickness 4 mm suitable for fork-lift truck and crane 100 mm ground leeway, suitable for pallet truck can be secured to prevent slipping and unintentional emptying CONTAINER WITH DROP AWAY BASE Using a lever trolley Using a crane red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized in compliance with standard EN ISO swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake - construction height 220 mm Fork sleeve inside dimensions in mm min. length of forks 1100 mm Type A B C BKB can be stacked in another Type BKB with wheels Type Volume Dimensions Load capacity Weight (approx.) in m 3 in mm (l x w x h) in kg painted in kg BKB 500 0, x 1040 x BKB 700 0, x 1040 x BKB , x 1040 x Did you know that... We ve sold more than 350,000 fork-lift truck attachments around the world! 25

26 HINGED BOTTOM SKIP TYPE SB Volume 0,5-2,0 m 3 The economical way to collect waste or to commission solids using a minimum of space HINGED BOTTOM SKIP sturdy construction, trap door with reinforcement trap door closes automatically when skip touches the ground suitable for fork-lift and crane guiding plates for trap door cable-operated door release can be secured to prevent slipping and unintentional trap door operation can be stacked (3 units) red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized in compliance with standard EN ISO 1461 Type SB galvanized hinged 2-part lid 2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake - construction height 220 mm Individual construction on request e. g. stainless steel Emptying by crane Emptying by fork-lift 26 Type Volume Dimensions Load capacity Weight (approx.) in m 3 in mm (l x w x h) in kg painted in kg SB 500 0, x 1304 x SB 750 0, x 1304 x SB , x 1304 x SB , x 1904 x SB , x 1904 x Fork sleeve inside dimensions in mm min. length of forks 1100 mm Type A B C SB

27 BUILDING MATERIALS CONTAINER TYPE BC Volume 0,5-1,0 m 3 Typ BC The best way to provide economic logistical support for building sites sturdy construction for heavy duty use emptied using trap door reinforced floor with 2 locking devices cable operated door release suitable for pallet truck, fork-lift or crane special reinforced edging for mason s gripping unit can be stacked red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized in compliance with standard EN ISO 1461 BUILDING MATERIALS CONTAINER Type BC with mason s gripping unit Type BC for fork-lift or heavy duty loading vehicle galvanized hinged 2-part lid, can be opened from both sides 2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake - construction height 220 mm door release operated by mason s gripping unit Individual construction on request e.g. stainless steel Bulk loads and single items can be combined in one tour! Fork sleeve inside dimensions in mm Type BC, gripping unit release Type BC stacked Type Volume Dimensions Load capacity Weight (approx.) in m 3 in mm (l x w x h) in kg painted in kg BC 500 0, x 1304 x BC , x 1304 x min. length of forks 1100 mm Type A B C BC

28 LATTICE CONTAINERS Tiltable containers for light goods, e.g. paper, plastics, wood and green wastes LATTICE CONTAINERS Type BSK-G 90 Emptying by using a taverse (Fork-lift traverse type BST or crane- and fork-lift traverse type BKT) floor made of steel sheet walls from screens, mesh size 25 x 25 mm can be emptied at any height by cable operated from the driver s seat can be secured to prevent slipping and unintentional emptying green RAL 6009 hot-dip galvanized in compliance with standard EN ISO swivel + 2 fixed polyamide castors Fork sleeve inside dimensions in mm Type SB-G 1000 Emptying by trap door Type A B C BST/BKT GU-G Fork sleeve inside dimensions in mm min. length of forks 1100 mm Type A B C SB-G Type GU-G 1000 with low structual height Type Volume Dimensions Load capacity Weight (approx.) in m 3 in mm (l x w x h) in kg painted in kg BSK-G 90 0, x 1000 x SB-G , x 1304 x GU-G , x 1280 x Fork-lift traverse type BST 90 Fork-lift and crane traverse type BKT 90 Did you know that... Further information about the standard versions of these products: Tilting Container type GU page 13 Barrow Tipper type BSK page 22 Hinged Bottom Skip type SB page 26

29 BARROW TIPPER TYPE KW Type KW with fork sleeves Type KW in emptying position Type KW without fork sleeves Volume l For all kinds of bulk goods; is emptied at ground level sturdy steel sheeting construction with reinforced edging frame made of steel tubing welding, oil- and watertight spring safety fastening 2 wheels + 1 swivel castor (as of KW 600 upwards + 2 swivel castors) made of solid rubber, Ø 250 mm x 60 mm, one swivel castor with brake handle load capacity 300 kg red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized in compliance with standard EN ISO 1461 fork sleeves can be secured to prevent slipping and unintentional emptying perforated base sieve for metal shavings perforation Ø 3 mm, separation 6 mm and 1 drain-cock galvanized hinged 2-part lid BARROW TIPPER Safety chain and spring safety fastening Perforated base sieve 1" drain-cock Type KW with fork sleeves and lid Available in different colours Fork sleeve inside dimensions in mm Type Volume Dimensions Height dumping edge Weight in kg (approx.) in l (l x w x h) in mm without sleeves in mm (without/with sleeves) KW x 820 x KW x 900 x KW x 1070 x KW x 1340 x Other dimensions possible Type A B C KW

30 SWARF CONTAINER TYPE SGU Volume 0,3-1,5 m 3 Specially designed to separate liquids from solids and collect them SWARF CONTAINER perforated intermediate floor 100 mm above the floor, perforation Ø 3 mm, separation 6 mm 1 drain-cock for drainage of liquids can be emptied at any height by cable operated from the driver s seat body wall with reinforced edging sturdy frame with fork sleeves can be secured to prevent slipping and unintentional emptying welding, oil- and watertight Type SGU with wheels red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized in compliance with standard EN ISO 1461 Type SGU in emptying position Type SGU galvanized with wheels 2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake - construction height 220 mm and handle supporting feet for use with a pallet truck Individual construction on request e. g. stainless steel Fork sleeve inside dimensions in mm Other dimensions possible 30 Type SGU with supporting feet for use with a pallet truck Type Volume Dimensions Load capacity Weight approx. in m 3 in mm (l x w x h) in kg painted in kg SGU 30 0, x 680 x SGU 50 0, x 780 x SGU 75 0, x 1280 x SGU 100 1, x 1280 x SGU 150 1, x 1280 x Type A B C SGU SGU SGU Did you know that... Our specialists will be happy to advise you

31 SWARF CONTAINER TYPE SKM Volume 0,3-0,75 m 3 Specially designed to separate liquids from solids and collect them perforated sieve perforation Ø 3 mm, separation 6 mm 1 drain-cock for drainage of liquids ideally situated loading centre of gravity can be emptied at any height by cable from the driver s seat body wall with reinforced edging sturdy frame with fork sleeves can be secured to prevent slipping and unintentional emptying welding, oil- and watertight with castors and handle SWARF CONTAINER Type SKM red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized in compliance with standard EN ISO 1461 Individual construction on request e. g. stainless steel Type SKM in emptying position Type SKM Fork sleeve inside dimensions in mm Type SKM perforated sieve 1" drain-cock Type Volume Dimensions Load capacity Weight (approx.) in m 3 in mm (l x w x h) in kg painted in kg SKM 30 0, x 820 x SKM 50 0, x 1280 x SKM 75 0, x 1180 x Other dimensions possible Type A B C SKM SKM SKM

32 SILO CONTAINERS SILO CONTAINERS Type SR 375 Volume 375 and 600 l The solution for controlled emptying special manually operated scissor lock 300 x 300 mm frame made of steel tubing hopper made of steel plating with reinforced edging Types available Typ SR Typ SG Typ SRE 2 swivel + 2 fixed polyamide castors Ø 180 mm, 1 swivel castor with brake - construction height 220 mm and handle fork sleeves 175 x 65 mm plus stacking corners 2 swivel + 2 fixed polyamide castors Ø 180 mm, 1 swivel castor with brake - construction height 220 mm plus handle and fork sleeves 175 x 65 mm red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized in compliance with standard EN ISO 1461 Type SG 375 galvanized lid Individual construction on request Type SG Type SRE Type Volume Outer dimensions Hopper Weight (approx.) in l in mm(l x w x h) in mm (l x w x h) painted in kg SR x 780 x x 780 x SRE x 780 x x 780 x SG x 860 x x 780 x SR x 780 x x 780 x SRE x 780 x x 780 x SG x 860 x x 780 x Did you know that... We manufacture for the environmental sector: From retention basins to storage facilities.

33 SILO CONTAINERS Volume 375 and 600 l The solution for controlled emptying bolt with a special seal on the hopper floor, manual use, opening 300 x 300 mm frame made of steel tubing hopper made of steel plating with reinforced edging Type SR-D 2 swivel + 2 fixed polyamide castors Ø 180 mm, 1 swivel castor with brake - construction height 220 mm and handle SILO CONTAINERS Type SG-D fork sleeves 175 x 65 mm and stacking corners Typ SRE-D 2 swivel + 2 fixed polyamide castors Ø 180 mm, 1 swivel castor with brake - construction height 220 mm plus handle and fork sleeves 175 x 65 mm Type SR-D with crane eyes red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized in compliance with standard EN ISO 1461 crane eyes galvanized lid Type SG-D galvanized with crane eyes Type SRE-D with crane eyes Type Volume Outer dimensions Hopper Weight (approx.) in l in mm (l x w x h) in mm (l x w x h) painted in kg SR-D x 780 x x 780 x SRE-D x 780 x x 780 x SG-D x 860 x x 780 x SR-D x 780 x x 780 x SRE-D x 780 x x 780 x SG-D x 860 x x 780 x Individual construction on request e. g. stainless steel 33

34 SILO CONTAINERS SILO CONTAINERS Type SGK with flap open Type SGK For separated storage and commissioning of bulk materials hopper made of steel sheeting with reinforced edging angle of inclination (floor) 30 basic frame with fork sleeves can be secured to prevent slipping and unintentional emptying suitable for use with fork-lift truck or crane can be moved using a pallet truck can be stacked (3 units) Constructions available TYPE SGK with front flap that is opened by pulling the operating cable from the driver s seat opening: 1050x650 mm TYPE SGS with a sliding door that can be locked in position, manually operated opening: 250x250 mm Type SGK when stacked Type SGS with sliding door open Type SGS on a pallet truck red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized in compliance with standard EN ISO Type Volume Dimensions Load capacity Weight (approx.) in m 3 in mm (l x w x h) in kg painted in kg SGK 50 0, x 1000 x SGK 75 0, x 1000 x SGK 100 1, x 1000 x SGS 50 0, x 1000 x SGS 75 0, x 1000 x SGS 100 1, x 1000 x Fork sleeve inside dimensions in mm Type A B C SGK, SGS

35 FILLING HOPPER For the easy filling of e.g. BIG BAGs and containers hopper made of reinforced steel sturdy frame with fork sleeves can be secured to prevent slipping alternatively, however with standing construction, prepared for attachment at the ground FILLING HOPPER Attachment for the fork-lift truck for the filling of BIG BAGs Standing construction for the filling of containers with building material The filling hopper can be delivered in various dimensions. Please contact us! Standing construction for the filling of BIG BAGs 35

36 COLLECTING SYSTEM TYP SBS Volume 0,5-2,0 m 3 Collection and transport system for separated waste COLLECTING SYSTEM Type SBS sturdy steel sheeting construction for use with a fork-lift truck or crane even different sizes can be stacked (max. 3 high) optimized stacking dimensions mean the whole loading surface of the truck can be used - stacking supports 600 mm apart, height 850 mm red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized in compliance with standard EN ISO 1461 Type SBS, when stacked : trolley with wheels can be used for example to collect panes of glass optimized use of the whole loading surface Fork sleeve inside dimensions in mm 36 Type Volume Length Width Height Load capacity Weight in m 3 in mm in mm in mm in kg painted in kg SBS 500 0, SBS , SBS , Type A B C SBS

37 TIPPER Type LK with castors... Type LK, can be taken on 4 sides with fork sleeves TIPPING CART TYPE KJ A transport cart with a tipping pan that can be used anywhere and everywhere Type KJ in emptying position with pneumatic tyres...can be emptied to both sides Inside dimensions of fork sleeves in mm Type A B C LK / LK / sturdy construction welding, oil- and watertight double-folded top rim with reinforced corners with 3 crane eyes tipping pan empties forwards steel tubing frame with supporting feet automatic pan locking mechanism choice of tyres Ø 400 mm solid rubber or pneumatic hub with wheel-bearing Type Volume Outer dimensions Height dumping edge Weight in l in mm (l x w x h) in mm (approx.) in kg LK x 920 x LK x 920 x KJ x 840 x KJ x 840 x MUK 140 Typ WS x 900 x MUK x 900 x Volume 300 and 600 litres LOREN-TIPPER TYPE LK Container that can be emptied to both sides which can be taken from 4 sides with forks sturdy construction load capacity: 300 kg can be taken from 4 sides with forks trough that can be emptied to both sides easy unlocking can be secured to prevent slipping and unintentional emptying red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized (EN ISO 1461) 2 swivel + 2 fixed polyamide castors Ø 125 mm, 1 swivel castor with brake - construction height 160 mm ROCKING TIPPER TYPE MUK construction as type KJ, however the tipper can be emptied over the blades Type MUK with solid rubber tyres in emptying position TIPPER 37

38 BROOM / WEATHER PROTECTION BROOM / WEATHER PROTECTION Type SKB in basic position BROOM FOR FORK-LIFT TRUCK TYPE SKB Easy and economic sweeping of parkings, accesses, ways, storing places, halls, courtyards etc. sturdy steel construction fork sleeves can be secured to prevent slipping suitable for fork-lift trucks and other vehicles with forks durable brush elements, individually exchangeable adjustable in two positions, to the right and to the left red RAL 3000 Individual construction on request e.g. hydraulic adjustment attachment to wheel-loader shovel Type SKB in left position... in right position Fork sleeve inside dimensions in mm Type Dimensions Weight in mm (l x w x h) in kg SKB x 1000 x SKB x 1500 x SKB x 2000 x Type WS Type A B C SKB WEATHER PROTECTION TYPE WS For the dry transportation of materials sensible against corrosion and weather on company premises simple pick-up using forks fork sleeves suitable for forks measuring 150 x 50 mm roof made of steel sheeting spray painted finished red RAL 3000, or hot-dip galvanized in compliance with standard EN ISO 1461 Fork sleeve inside dimensions in mm 38 Type Dimensions Usage Height Weight in mm (l x w x h) in mm painted in kg WS x 1530 x WS x 1530 x WS x 1530 x Type A B C WS

39 SHOVELS TYPE BS Volume 0,5-2,5 m 3 The Original BAUER Shovel for loading and transporting bulk material successful more than 30 years simple pick-up using forks can be emptied at any height by cable operated from the driver s seat wall with reinforced edging steel alloy blade trim sturdy frame and release mechanism can be secured to prevent slipping Type BSE SHOVELS Type BSE in emptying position Type BSE Types available Type BSE mechanical Type BSE-H hydraulic Type BSM mechanical, with trough opening Type BSM-H hydraulic, with trough opening Type BSM Type BSM-H Type BSM, BSM-H and Type BSE, BSE-H Type BSE without trough openings Volume Inside- Inside- Height Weight max. cross distance max. cross distance approx. width depth BSM BSE section forks between forks section forks between forks in m 3 in mm in mm in mm in kg in mm in mm B+C in mm A in mm 0, x , x , x , x , x , x , x , x , x , x , x , x , x , x , x Type BSM with trough openings Please indicate when ordering Our standard is made to measeure 39

40 SHOVEL TYPE DGS Volume 0,5-1,2 m 3 Hydraulic shovel with double joint sturdy frame and shovel with shield trim made of special steel ideally situated loading centre of gravity with double joint controlled movement (backwards and forwards) hydraulic tilting simple pick-up using forks can be secured to prevent slipping SHOVEL Type DGS Type DGS in transport position Fork sleeve inside dimensions in mm Type A B C DGS DGS DGS 950, Type DGS in emptying position 40 Type Volume Dimensions Load capacity Weight (approx.) in m 3 in mm (l x w x h) in kg in kg DGS 500 0, x 1050 x 720* DGS 700 0, x 1210 x 720* DGS 950 0, x 1610 x 720* DGS * Schaufelhöhe 1200 (ohne Hydraulik-Zylinder) 1, x 2010 x 720* *height of shovel (without hydraulic cylinder) Did you know that... We are one of the leading manufacturers for environmental equipment.

41 SHOVEL TYPE HVR Volume 0,5-1,5 m 3 Hydraulic shovel with 2 cylinders for controlled emptying controlled movement (backwards and forwards) sturdy frame and body; steel alloy trim on front wall suitable for any fork-lift truck no preparation necessary; just pick up the unit using the forks can be secured to prevent slipping SHOVEL Type HVR ready for transport Type HVR in emptying position Type HVR in use at an agricultural trader s Fork sleeve inside dimensions in mm Type Volume Outside dimensions Weight (approx.) in m 3 in mm (l x w x h) in kg HVR 50 0, x 1230 x HVR 75 0, x 1630 x HVR 80 L 0, x 1030 x HVR 100 1, x 1830 x HVR 150 1, x 2030 x Did you know that... For current information please see: Other dimensions possible Type A B C HVR L HVR

42 SNOWDOZERS TYPE SCH Shield width 1,5-2,4 m These sturdy snowdozers are available in 4 types simple pick-up using forks can be secured to prevent slipping adjustable shield; 2 positions, to the right or left edge trim screwed to the shield; quick change possible SNOWDOZERS Type SCH-G with rubber shield trim Types available Type SCH-S with steel shield trim Type SCH-G with rubber shield trim Type SCH-V with vulkolan shield trim Type SCH-F with spring-loaded shield trim Type SRS-G with rubber shield trim Type SCH-F with spring-loaded shield trim 42 Type Shield Clearing width Shield Cross section Distance Weight width (adjustable) height forks between forks in mm in mm in mm in mm in mm in kg SCH-S /1300/ x SCH-S /1600/ x SCH-S /1800/ x SCH-S /2100/ x SCH-G /1300/ x SCH-G /1600/ x SCH-G /1800/ x SCH-G /2100/ x SCH-V /1300/ x SCH-V /1600/ x SCH-V /1800/ x SCH-V /2100/ x SCH-F /1300/ x SCH-F /1600/ x SCH-F /1800/ x SCH-F /2100/ x SRS-G (1100*) 1500/ x SRS-G (1200*) 1800/ x SRS-G (1600*) 2100/ x SRS-G (1800*) 2400/ x SRS-G (2000*) 2700/ x Type SCH-V with vulkolan shield trim SNOW CLEARING SET TYPE SRS The ideal combination a snowdozer with a snow shovel the snowdozer can easily be mounted onto the shovel - no tools necessary angle of the shield can be varied using the bolt * width of shovel

43 SNOW PLOUGH TYPE SCH-P Shield width 1,5-2,1 m Type SCH-P Type Shield- Height Cross Distance Weight width section forks between forks in mm in mm in mm (inside)in mm in kg SCH-P x SCH-P x SCH-P x This sturdy snow plough automatically compensates uneven surfaces pendulum suspension shock absorbers uneven surfaces are no problem easy on the mast variable ground leeway thanks to adjustable runners adjustable shield; 2 positions, to the right and to the left SNOWPLOUGH / SPREADER Type STW with tarpaulin SPREADER TYPE STW suitable for salt, sand can be towed by a fork-lift truck or small traction engine etc. with solid rubber tyres wheel motion activates spread with lever to adjust spreading width can be adjusted for a narrow or wide spread path and to the left or to the right, spreading range from 1-6 meters spray painted red RAL 3000 GRITTER TYPE SH For sand, salt and grit driven by fork-lift hydraulic system variable gritting range; can be adjusted by varying height and angle of inclination of mast stirring mechanism protective grid as cover fork sleeves for pick-up by a fork-lift spray painted, tarpaulin (on request) Type SCH-G in combination with Type STW Technical data Type SH Type STW max. gritting range (m) 9 6 funnel volume (l) fork sleeves (mm) 200 x 70 weight (kg) total permitted weight 450 load capacity 135 min. oil consumption (l/m) 15 max. output (l7m) 80 Type SH 43

44 ACCESS SAFETY PLATFOMRS ACCESS SAFETY PLATFORMS TYPE MB Type MB-A, certif. by TÜV Austria Certified access safety platforms for fork-lifts enable repair work or maintenance to be carried out safely number of persons permitted: 2 permissible total weight: 300 kg with galvanized tool deposit measuring 745 x 150 x 110 mm fork sleeves with safety mechanism to prevent slipping only MB-NL: two-hand acception switch, flash, cable support, 8 m cable Type MB-D according to UVV Type MB-CH Type MB-NL 2 swivel + 2 fixed polyamide castors Ø 180 mm, 1 swivel castor with brake construction height 220 mm Type MB-D/L, according to UVV Type MB-CH 44 Type Dimensions Floor area Weight Fork sleeve inside dimensions in mm in mm (l x w x h) in mm in kg A B C MB-D 1115 x 1200 x x MB-D/L 1290 x 800 x x MB-CH 1115 x 1200 x x MB-CH/L 1290 x 1000 x x MB-A 1115 x 1200 x x MB-NL 1115 x 1200 x x Fork sleeve inside dimensions in mm

45 ACCESS SAFETY PLATFORMS TYPE MB TYPE MB-F With few handles work, the platform is operational folding construction number of persons permitted: 2 with permissible total weight: 300 kg fork sleeves with safety mechanism to prevent slipping protection grid mesh size: 20 x 20 mm TÜV-verified in compliance with UVV ACCESS SAFETY PLATFORMS Type MB-F in compliance with UVV TYPE MB-K Certified access safety platform for cranes enables repair work or maintenance to be carried out safely number of persons permitted: 2 permissible total weight: 300 kg fork sleeves with safety mechanism to prevent slipping including 4-leg chain : (MB-F and MB-K) 2 swivel + 2 fixed polyamide castors (one swivel castor with brake) Ø 180 mm, construction height 220 mm galvanized tool deposit: 600 x 200 x 80 mm (MB-F) galvanized tool deposit: 745 x 150 x 110 mm (MB-K) Fork sleeve inside dimensions in mm Type MB-K IV in action, in compliance with UVV with 4-leg chain Type Dimensions Suitable for Floor area Weight in mm (l x w x h) in mm in kg MB-F 1090 x 1200 x 1890 fork-lift 1000 x MB-K IV 800 x 1200 x 2250 fork-lift + crane 800 x

46 EXTENSIBLE CRANE ARM EXTENSIBLE CRANE ARM TYPE KT-KTH Type KTH The extensible crane arm increases the reach of the fork-lift truck steel construction basic length 2200 mm extension arm is positioned inside the shell and can be extended in 8 steps to reach full length secured by chain to prevent slipping 2 rotating hooks with safety catch the KTH has a variable working height and can be fixed in each of the 3 positions using the pin provided hot-dip galvanized in compliance with standard EN ISO 1461 Type KTH in basic position Type KTH extended and height adjusted Type KTH extended Type Position Weight Distance (mm) in kg KTH 2,5 Max.load(kg) KTH 5,0 Max.load(kg) Remember to check the load capacity of the fork-lift in question! Fork sleeve inside dimensions in mm Type A B C KTH 2, KTH 5, KT 2, Type KT 2,5 Type Position Weight Distance (mm) (kg) KT 2,5 Max.load(kg) Remember to check the load capacity of the fork-lift in question! Did you know that... Our specialists will be happy to advise you on site

47 CRANE HOOKS / LOADING FORKS CRANE HOOK TYPE LH I with rotating hook with safety catch max. load: 1 metric ton weight: 10 kg cross section forks 160 x 60 mm Type LH-I galvanized Type LH-I hot-dip galvanized in compliance with standard EN ISO 1461 CRANE HOOK TYPE LH II with rotating hook with safety catch max. load: 2,5 or 5 metric tons weight: 24 or 35 kg other capacities on request CRANE HOOKS / LOADING FORKS Type LH-II LOADING FORK TYPE M/A Loading forks are essential for handling of pallets, containers and grating-boxes. hot-dip galvanized in compliance with standard EN ISO 1461 with manual or automatic load counter-balancing system adjustable forks adjustable usage height Individual constructions on request forks: black Type M with manual load counter-balancing system Type A with automatic load counter-balancing system Please supply the following information: Type M (with manual) or Type A (with automatic load counter-balancing system) load capacity required 1000/1500/2000 or 3000 kg Type Load capacity Usage height Length of forks Cross section forks Distance between forks Weight in kg in mm min / max in mm in mm (w x h) in mm outside-outside min / max in kg M/A / x / / 117 M/A / x / / 120 M/A / x / / 220 M/A / x / /

48 TIPPING EQUIPMENT TIPPING EQUIPMENT Type KGH Type Dimensions Load Weight capacity in mm (l x w x h) in kg painted in kg KGH 2420 x 1220 x Type KGM Type Dimensions Load Weight capacity in mm (l x w x h) in kg painted in kg KGM Construction with individual indications TYPE KGH hydraulic Thorough and controlled emptying; unit operated from the driver s seat suitable for any fork-lift truck with a third control valve suitable for containers, cases and pallets made of metal, wood or plastic the container in question can be completely emptied thanks to the 130 range of rotation (directed to the left hand side) Stirrups for a fork-lift are necessary; if not available, they can be included in the scope of supply TYPE KGM Individual constructions on request mechanical Easy to use with any fork-lift can be emptied at any height by cable operated from the driver s seat no preparations of the fork-lift necessary can be secured to prevent slipping from the forks Types available According to the given container specification. WHEELIE BIN TIPPER TYPE MK Fork sleeve dimensions in mm Inside dimensions 150 x 70 In-between 490 Turning fork dimensions 1200 x 120 x 60 Adjustment range AK -AK max To pick up, empty and clean 80, 120 or 240 litre wheelie bins sturdy steel construction fork sleeves for pick-up using forks suitable for fork-lift trucks, front loaders and other vehicles with forks can be secured to prevent slipping and unintentional emptying Type MK Fork sleeve inside dimensions in mm self-locking hooks hold the wheelie bin securely in place during emptying load capacity: 250 kg 48 Type MK in emptying position Type Dimensions Weight in mm (l x w x h) in kg MK x 930 x /73 MK x 1020 x /76 Type A B C MK MK hot-dip galvanized in compliance with standard EN ISO 1461

49 KIPPOMAT TYPE KM An ideal product for the transport, emptying and cleaning of large wheelie bins (770 l and 1100 l with 4 castors) in compliance with DIN EN Type KM sturdy frame with fork sleeves and tilting device can be secured to prevent slipping and unintentional emptying 2 locking bolts (for steel containers) or 2 hinged tool holders (for plastic containers) secure the container during emptying steel cable secures the opened cover tilting procedure is made by forklift truck hydraulics, minimum operating pressure: 130 bar tiltable and back tiltable the speed when tilting is steplessly adjustable over throttle vales with receiving hooks for hydraulic hoses, steel cable and safeguard chain KIPPOMAT hot-dip galvanized in compliance with standard EN ISO 1461 TYPE KG The ideal product for the transport, emptying and cleaning of euro-lattice boxes in compliance with DIN like type KM, however, the lattice box is secured by a holding device during emptying Fork sleeve inside dimensions in mm Type KG Type Outer dimensions Tilting angle max. Load capacity Weight in mm in degrees in kg in kg KM 1850 x 1390 x KG 1850 x 1270 x Type A B C KM / KG

50 FORK-LIFT TENDER-SYSTEM FORK-LIFT TENDER-SYSTEM TYPE STS The STS is ready for use after driving the fork-lift truck into the fork sleeves and lifting the platform Optimizes transportation logistics with the fork-lift truck - shorter ways and less costs sturdy frame made of steel tubing loading platform made of resinous wood (30 mm thickness) rotary ring with fork sleeves and a safety device to prevent slipping 2 stands 2 special castors Ø 300 x 100 mm for heavy loads finish: spray painted red RAL 3000 Individual construction on request e.g. with a pluggable second platform, stanchions, swing-tree, shelves, retention basins Additional loading capacity by a pluggable platform Transport of goods with large lengths; small turning circle Commissioning of manufacturing parts max. Rotary ring with fork sleeves Fork sleeve inside dimensions in mm 50 Type Outer dimensions Loading platform max. load capacity Weight in mm (l x w x h) in mm (l x h) in kg in kg STS 2, x 2000 x x STS 5, x 2000 x x Individual dimensions and individual load capacities are available Type A B C STS

51 TRANSPORT EQUIPMENT TYPE RGP Platform for collection and transport of chipboards, metal plates, etc. sturdy platform with fork sleeves constructed in 5 mm steel sheeting tilting from any height by cable can be secured to prevent slipping and unintentional emptying Type RGP red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized in compliance with standard EN ISO 1461 TRANSPORT EQUIPMENT TYPE LGK Container for collection and transport of strips, boards, plastic profiles, bars etc. Type RGP in emptying position tilting from any height by cable bottom, tilting and back wall reinforced by U-profiles without side walls can be secured to prevent slipping and unintentional emptying 2 swivel + 2 fixed polyamide castors (one swivel castor with brake) Ø 180 mm, construction height 220 mm red RAL 3000 green RAL 6011 grey RAL 7005 Type LGK Type RGP-1 RGP-2 RGP-3 LGK Typ WS Dimensions in mm (l x w x h) 2500 x 1540 x x 1790 x x 1790 x x 1500 x 780 Load capacity in kg Other dimensions on request Weight painted in kg hot-dip galvanized in compliance with standard EN ISO 1461 Fork sleeve inside dimensions in mm Type A B C RGP LGK

52 GAS BOTTLE PALLET TYPE SFP For the safe and economical transport of 1 to 8 steel cylinders with less effort GAS BOTTLE PALLET sturdy basic frame with insert pockets with safety chains to secure gas bottles seperately lateral tilting limitation with receiving hooks for hoses and closing caps hot-dip galvanized in compliance with standard EN ISO 1461 Fork sleeve inside dimensions in mm Type SFP 4 Type A B C SFP SFP Type SFP 4 Type SFP 8 Type SFP 8 52 Type Storage area Dimensions Load capacity Weight (max. number of cylinders) in mm (l x w x h) in kg in kg SFP 4 4 x Ø 250 mm 600 x 860 x SFP 8 8 x Ø 250 mm 1200 x 860 x Did you know that... You can contact us also by info@bauer-suedlohn.de

53 SHUNTING-AID / TYRE FITTING EQUIPMENT Type RH with fork-lift truck and up-trailer SHUNTING-AID TYPE RH Shunting-aid to facilitate the handling of up-trailers on company premises etc. sturdy fork sleeves for the forks with coupling-head and safety device to prevent slipping easy coupling from the driver s seat red RAL 3000 other colours on request hot-dip galvanized in compliance with standard EN ISO 1461 SHUNTING-AID / TYRE FITTING EQUIPMENT Fork sleeve inside dimensions in mm Easy coupling from the driver s seat Type A B C RH TYRE FITTING EQUIPMENT TYPE RM Easy tyre fitting for trucks, buses and fork-lifts enormous time reduction verified by the German TÜV adjustable rotating pick-up no damage to wheel nuts adjustable length of the handle Type RM Type RH RM Outer dimensions in mm (l x w x h) 400 x 700 x 170 Weight painted in kg Type RM 53

54 FORK EXTENSIONS / LOADING FORKS FORK EXTENSIONS / LOADING FORKS EXCHANGE STATION TYPE WSG Type WSG FORK LIFTER TYPE GZH Easy mounting of the forks load capacity: 150 kg max. cross section forks: type A: 125 x 65 mm, type B: 150 x 65 mm red RAL 3000 Other colours available on request! for open fork extensions time saving: no more searching for fork extensions improved safety: no risk of injury as operation is made by machine improved ergonomics: no manual operations necessary low transport volume as screwed construction is delivered dismantled on an EURO pallet for max. 2 pairs of fork extensions with a width of < 210 mm per extension adjustable platform fork extension stop adjustable to max mm prepared for attachment at the ground red RAL 3000 other colours on demand galvanized in compliance with standard EN ISO 1461 Type Transport measures Dimensions Weight in mm (l x w) in mm painted in kg WSG 1200 x to 1400 x 1200 x FORK EXTENSIONS TYPE GO/GG Fork extensions made according to your measurements Please indicate the following measures: desired total length, length of forks, cross section forks Please note: The length of the existing forks must be at least 60 % of the total required length (otherwise unstable).. Other colours available on request! Type GG closed construction (case profile) secured by bolt 54 Type GZH Type GO open construction (channel profile) secured by shackle

55 BATTERY CHARGING STATION TYPE BL How to charge batteries of vehicles used in the material handling industry according to the German guidelines relevant ot the prevention of damage: GroLa BG Batteries for vehicles used in the materials handling industry (Union for wholesalers and warehouses) VdS -Information Sheet No (Association of insurers of property) Type BL Battery Charging Station consists of: sturdy construction, height of frame can be adjusted prepared for anchorage to a wall or to the floor folding table for small battery chargers warning signs eye wash shelf for gloves and safety goggles safety feature to avoid an overload < = 300 ma 2 safety sockets 16 A 230 V fixture for charging cable Ceeform socket 16 A 400 V Ceeform socket 32 A 400 V 6 kg fire extinguisher incl. fixture fixture for water receptacle BATTERY CHARGING STATION Type BL with fire extinguisher, with Ceeform socket 400 V charging the battery of an electric fork-lift truck Type Dimensions Weight in mm (l x w x h) (approx.) in kg BL 1000 x 450 x

56 DRUM LIFTERS DRUM LIFTERS TYPE RS Type RS-II/M, transporting bung-hole drums Type RS-II/91, transporting L-ring drums ex -zone constructions in compliance with ATEX 95 available for the following products: -drum lifter type RS page 56/57 -drum tipper type Flex page 59 -Liftomat type L page 61 -drum jack roller type FHR page 62 TYPE RS Safe and fast handling of drums (200 litre steel and plastic drums) sturdy construction for a long life clear line of vision for the driver standard galvanized gripping head; easy to change rubber guards as a standard feature to prevent damaging of drums gripping mechanism screwed to frame incredible gripping strength can be secured to prevent slipping wide drum rim edge (RS/91) hot-dip galvanized in compliance with standard EN ISO 1461 extended fork sleeves hydraulic gripping aid supporting feet for straddle stackers Individual construction on request e.g. stainless steel for ex -zones in compliance with ATEX 95 available Type RS-I/M Type RS-I/M for straddle stacker 56 Type No. of drums Load capacity Dimensions Distance between forks Cross section forks Weight in kg in mm (l x w x h) in mm in mm in kg RS-I/ x 585 x x RS-I/M x 585 x x RS-I/D x 585 x x RS-II/ x 960 x x RS-II/M x 960 x x RS-II/D x 960 x x RS 60-I x 405 x x RS 60-II x 645 x x Type RS-II/M galvanized, transporting tension ring drums with lid, unit for mounting directly on carriage

57 DRUM LIFTERS TYPE RS Type RS-I/D 91 with conical drum TYPE RS/D 91 For transporting 120, 150 and 220 litre plastic drums e.g. drums with lid, square drums, conical drums with lid adjustable drum rest to fit various sized drums frame construction identical to RS-/MK can be secured to prevent slipping hot-dip galvanized in compliance with standard EN ISO 1461 DRUM LIFTERS Type RS-I/D 91 with 220-litre drum with lid Type RS 60 l, available for drums with a height of min. 500 mm with upper edge Individual construction on request e.g. stainless steel for ex -zones in compliance with ATEX 95 available TYPE RS 60 For transporting 60 litre steel and plastic drums sturdy construction for a long life clear line of vision for the driver standard galvanized gripping head; easy to change rubber guards as a standard feature to prevent damaging of the drum gripping mechanism screwed to frame incredible gripping strength can be secured to prevent slipping hot-dip galvanized in compliance with standard EN ISO 1461 extended fork sleeves feet for straddle stacker Also special constructions available: e.g. for 30 / 50 litre beer drums Individual construction on request e.g. stainless steel for ex -zones in compliance with ATEX 95 available 57

58 DRUM GRIPPERS DRUM GRIPPERS Type BF-II/MK Type FK-II TYPE BF for transporting metal and plastic L-Ring drums in an upright position height of gripping head can be adjusted opens automatically when set down can be secured to prevent slipping rubber guards as a standard feature to prevent damaging of the drum can be secured to prevent slipping hot-dip galvanized Type No. Load Dimensions Distance Cross sect. Weight of capacity betw. forks forks drums in kg in mm (l x w x h) in mm in mm in kg BF-I/MK x 585 x x65 95 BF-II/MK x 960 x x BF-III/MK x 1560 x x TYPE FK for 200 litre drums with rolling hoops or flanges available for 1 or 2 drums opens automatically when set down hot-dip galvanized Type No. Load Dimensions Distance Cross sect. Weight of capacity betw. forks forks drums in kg in mm (l x w x h) in mm in mm in kg FK-I x 620 x x65 67 FK-II x 1230 x x65 99 TYPE 3 P The safe way to handle steel and plastic drums of various sizes using a crane or a fork-lift truck span range: diametre mm safe 3-point pick-up automatic eccentric lock ideal for charging over- or salvage drums adjustable positioning feature hot-dip galvanized 58 Type 3 P with LH-I Load capacity in kg 400 Span range (Ø mm) Weight painted in kg 17 For the types BF, FK and 3P, individual constructions are available e.g. stainless steel

59 DRUM TIPPER TYPE FLEX Transporting, thorough and controlled emptying and turning of steel and plastic drums ( l) and waste bins (120/240 l) sturdy frame with fork sleeves Prisma with tenter-belt and special self-braking gear box with crank handle or loop chain can be secured to prevent slipping load capacity: 300 kg range of rotation: 360 suitable for fork-lift truck and crane Type FLEX-HK hot-dip galvanized in compliance with standard EN ISO 1461 DRUM TIPPER Individual construction on request e.g. stainless steel for ex -zones in compliance with ATEX 95 available The ideal combination for picking up drums in upright position and to store them horizontally in shelves: Drum Tipper + Shelf Drum Pallet Type FLEX-HK, emptying of 240 l waste bin Type FLEX-K with loop chain on crane Laying down on shelf drum pallet type RP Picking up by fork-lift truck Shelf drum pallet type RP, galvanized Type Dimensions Load Range of Tipping Distance Cross Weight (l x w x h) capacity rotation process betw.forks sect.forks in mm in kg in degree by in mm in mm painted in kg FLEX-HK 1000 x 1000 x crank handle x FLEX-K 1000 x 1000 x loop chain x RP 1114 x 580 x x Did you know that... All products can be supplied for ex -zones in compliance with ATEX 95 59

60 DRUM TIPPER TYPE FD Ideal for picking up, transporting and emptying steel drums with rolling hoops sturdy frame self-braking gear box drum cradle with eccentric lock can be secured to prevent slipping DRUM TIPPER Type FD/K with loop chain Type FD/HK with crank handle Type FD/H hydraulic Type FD/SK hot-dip galvanized (EN ISO 1461) 60 Type FD/L-HK with crank handle Type Drum Load Range of Tipping Distance Cross Weight diameter capacity rotation process betw. forks sect. forks in mm in kg in degree by in mm in mm painted in kg FD/K loop chain x FD/HK crank handle x FD/H hydraulic x FD/SK loop chain x FD/L-HK crank handle x FD/L-K chain x TYPE FD/L With adjustment feature to accommodate steel and plastic drums of different sizes Our standard is made to measure!

61 LIFTOMAT TYPE L Controlled drum emptying range of rotation up to 270 suitable for 200 l steel and plastic drums, e.g. rolling hoop and tension ring drums, plastic drums with a lid, L-ring drums etc. 2 swivel + 2 fixed solid rubber castors, both swivel castors with brake safe pick-up guaranteed; drum is held by the tension band at the front and spindle at the top available with crank handle or loop chain and self-braking gear box Types available Type L/E electric-hydraulic version with maintenance-free battery 12V/88Ah and charger for 230 V main connection LIFTOMAT Type L/M hydraulic version with hand pump Type L/M 1300 hot-dip galvanized in compliance with standard EN ISO 1461 Individual construction on request e.g. stainless steel for ex -zones in compliance with ATEX 95 available * * * Type L/E Type L/E in stainless steel construction Type L/M 600* L/M 1300 L/E 1300 Version hydraulic hydraulic electro-hydraulic Load capacity in kg Stroke height in mm Total stroke height in mm Emptying height in mm Range of rotation in degree Wheels with bearings in mm swivel Ø 175 fixed Ø 200 swivel Ø 175 fixed Ø 200 swivel Ø 175 fixed Ø 200 Weight in kg

62 DRUM JACK ROLLER DRUM JACK ROLLER TYPE FHR Pick up drums and transport them safely suitable for almost all types of metal and plastic drums (regardless of height, diameter and whether with or without lid) suitable for charging retention basins, depots for hazardous materials, drum stacking pallets etc. fitted with rubber guards to avoid damaging the drum swivel castors Ø 180 mm, fixed castors Ø 80 mm hot-dip galvanized in compliance with standard EN 1461 Individual construction on request e.g. stainless steel for ex -zones in compliance with ATEX 95 available Type FHR 600 G Type FHR 600 G, placing a drum on a retention basin Type FHR 600 K, with gripping brackets for 200 l drums 62 Type Width of Load Length Width Height Stroke Weight pallet capacity outside inside height in mm in kg in mm in mm in mm in mm painted in kg FHR 600 G FHR 600 K Type FHR 600 G placing a drum on a pallet

63 DRUM HANDLING EQUIPMENT DRUM JACK TYPE FH Ideal for handling plastic drums for plastic drums (bung-hole or with a lid) the gripping brackets guarantee safety during transport can be used to stack plastic tension ring drums without pallets Type FH-II hot-dip galvanized Type No. of Load Dimensions Distance Cross Weight drums capacity (l x w x h) betw.forks sect.forks painted in kg in mm in mm in mm in kg FH-I 1/ x 505 x x FH-I 1/ x 600 x x FH-II 2/ x 980 x x FH-II 2/ x 1160 x x DRUM TURNER TYPE FW To upright drums from a horizontal position or to store them lying down ideal for transporting drums suitable for charging drum shelves etc. available for 1 or 2 drums distance between forks: 290 mm cross section forks: 150x60 mm DRUM HANDLING EQUIPMENT Type FW hot-dip galvanized (EN ISO 1461) DRUM GRIPPER TYPE LF The safe way to pick up and transport drums in a horizontal position DRUM TIPPING JACK TYPE For 200 litre flange or rolling hoop drums for 200 litre rolling hoop drums in a horizontal position load capacity: 300 kg outer dimensions (l x w x h): 980 x 710 x 150 mm distance between forks: 390 mm cross section forks: 150 x 50 mm weight: 28 kg Type LF Type FKB Did you know that... Precision is a standard in our manufacturing process 63

64 DRUM HANDLING EQUIPMENT DRUM HANDLING EQUIPMENT DRUM TROLLEY WITH SUSPENSED AXLE TYPE FP Less physical strength needed stands up by itself; hardly any space needed for storage ideal weight distribution safe and easy for (un)loading pallets available with either pneumatic or solid rubber tyres Type FP-V Type Drum for Type of Load Dimensions Weight contents tyres capacity (l x w x h) in l in kg in mm in kg FP-V 200 metal drum solid rubber x 750 x FP-L 200 metal drum pneumatic x 750 x galvanized DRUM HAND CAR TYPE FHC The ideal transport unit for 200 litre rolling hoop drums less effort needed: even drums weighting up to 250 kg can easily be lifted reduced accident risk: the drum is raised and lowered in a controlled manner easy on the drum: the drum is gripped from the side; neither the base nor the tension ring (in the case of a drum with lid) can be damaged : spray painted: Did you know that We manufacture for the environmental sector; from retention basins to storage facilities

65 DRUM HANDLING EQUIPMENT DRUM TRAVERSE TYPE FT DRUM CLAMP TYPE FKL SCISSOR GRIPPER TYPE LG load capacity: 300 kg weight: 5 kg galvanized finish Type FT/MK for metal and plastic L-ring drums load capacity: 350 kg weight: 10 kg automatically secured spray painted finish load capacity: 360 kg weight: 10 kg for 60/200 litre steel drums galvanized finish DRUM HANDLING EQUIPMENT Type FT/M for metal drums CRANE HOOK TYPE LH-II CRANE HOOK TYPE LH-I Type LH-II with rotating hook with safety catch max. load: 2,5 or 5 metric tons weight: 24 or 35 kg hot-dip galvanized finish other load capacities on request Type LH-I DRUM PALLET TYPE FP Store or stack drums safely using a minimum of space and with minimal expense standard feature hot-dip galvanized finish (EN ISO 1461) with rotating hook with safety catch max. load: 1,0 metric ton weight: 10 kg cross section forks: 160 x 60 mm hot-dip galvanized finish Type FP-3 Type FP-2 Type No. of Dimensions Load Weight No.of units max. fork drums capacity poss.to stack width in mm (l x w x h) in kg in kg in mm FP x 750 x FP x 775 x Did you know that... You can find us in the web. Just contact: 65

66 CASTORS Polyamide castors Natural-coloured polyamide, mounted on roller bearings, temperature-resistant from -40 C to + 90 C. Sheet steel housing, high-gloss galvanized, with double-ball bearing mounting in fork head, screwed wheel axle, brake with double stop Fixed castor Swivel castor Swivel castor with brake Wheel Art. no. (mm) (mm) (mm) (mm) (mm) (mm) (kg) CASTORS Fixed castor x x Swivel castor x x Swivel castor with brake x x Wheel Fixed castor x x Swivel castor x x Swivel castor with brake x x Wheel Fixed castor x x Swivel castor x x Swivel castor with brake x x Wheel Polyamide heavy-duty castors Natural-coloured polyamide, mounted on roller bearings, temperature-resistant from -40 C to + 90 C. Sheet steel housing, high-gloss galvanized, with double-ball bearing mounting in fork head, screwed wheel axle, brake with double stop Fixed castor Swivel castor Swivel castor with brake Wheel Art. no Fixed castor x x 80 8, Swivel castor x x 80 8, Swivel castor with brake x x 80 8, Wheel Fixed castor x x Swivel castor x x Swivel castor with brake x x Wheel Polyurethan heavy-duty castors Special cast wheel body with polyurethane tread, sheet steel housing, high-gloss galvanized finish with doubleball bearing mounting in fork head, screwed wheel axle, brake with double stop Fixed castor Swivel castor Swivel castor with brake Wheel Art.no Fixed castor x x Swivel castor x x Swivel castor with brake x x Wheel Solid rubber castors Sheet steel wheel body, high-gloss galvanized finish, mounted on roller bearings, solid rubber tyres, sheet steel housing, double ball bearing mounting in fork head, screwed wheel axle, brake with double stop Fixed castor Swivel castor Swivel castor with brake Wheel 66 Art. no Fixed castor x x Swivel castor x x Swivel castor with brake x x Wheel Securing material for 1 set of swivel and fixed castors resp., suitable for all above-mentioned types Other types or stainless steel castors on request

67 FA CINATING SOLUTIONS... Retention Basins 69-87, Drum Shelves Shelves for small cans 93 Gas-Cylinder Container Protective Container 101 Shelving Basins 102 Pallet Shelves 103 Heating Chambers 104 Depot Containers 105 Shelf Containers Shelf-Container Installations Safety Cubicles 110 F90 Fire Protection Containers Collection Points Individual Constructions 116 ENVIRONMENT-STORAGE 67

68 HOW TO DEAL WITH HAZARDOUS GOODS For the storage of hazardous goods, the following German laws, guidelines and regulations are to be observed among others. WHG Stawa-R ÜHP DIBt WGK law governing water household technical requirements regarding retention basins made of steel with a volume up to 1000 litres Certification of the manufacturer after verification of the product by an acknowledged examination board German Institute for technical construction water endangering classes Classes grading system/pollution threat to ground water 1 slightly dangerous 2 dangerous 3 extremely dangerous As we are a German company, German rules and guidelines influence the construction and design of our products. Where storage is concerned we can therefore only refer to the German regulations. Of course each country has its own stipulations and these should be adhered to. Our products comply with the said regional and/or national requirements. If your region makes any special demands, for example concerning minimum retention volume etc., please let us know and we shall be glad to take these points into consideration when dealing with your enquiries. To the left you will find explanations for the German abbreviations used in this catalogue. Even if not specific to your country, we know that German regulations are renown for being stringent and are therefore widely respected and recognized. VAwS TRbF TRGS TRG LöRüRL VbF BetrSichV GefstoffV regulations for plants dealing with materials posing a potential threat to ground water technical rules regarding flammable liquids technical rules regarding dangerous goods technical rules regarding pression gas regulations regarding retention of extinguishing water regulation for flammable liquids (cancelled) regulations regarding working safety regulations regarding hazardous goods 68 The VbF classes are replaced by a new classification 4 according to the regulations regarding hazardous goods. old new acc. to VbF acc. to GefstoffV Symbol R regulation A I extremely flammable F+ R 12 A I / B lightly flammable F R 11, R 15, R 17 A II flammable R 10 A III Explanation of the R regulations R regulation Criteria R 12 liquids, flashpoint < 0 C, boiling point max. 35 C R 11, R 15, R 17 liquids, flashpoint > 0 and < 21 C R 10 liquids, flashpoint 21 to 55 C PRODUCT FINISHES We only use environmental friendly paints, i.e. lead- and chromate-free. Our standard colours are: red RAL 3000 green RAL 6011 grey RAL 7005 The demonstrated colours are only for orientation and cannot reflect the exact RAL colours. hot-dip galvanized in compliance with standard EN ISO 1461 Also available on demand: sand blasted coatings/linings

69 RETENTION BASINS TYPE AM Use storage of 1-4 x 200 litre drums Type AM-2 Type AM-1 Type AM-4/A conical construction can be stacked in one another strengthened by reinforced edging on both sides galvanized grid stirrups, 100 mm ground leeway for use with a pallet- or fork-lift truck red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized (EN ISO 1461) PE inlay foil sheeting fibreglass coating stainless steel grid synthetic grid drum stand, type FA for 60 or 200 litre drums RETENTION BASINS All retention basins can be equipped with a coating resistant to aggressive media, i.e. acids or alkalies, e.g. foil sheeting, PE- inlay, glassfibre coating etc. Individual construction on request Type AM-4/B Type AM-4/B galvanized, with drum stand type FA 60-3 Type No. of Dimensions Retention capacity Weight drums in mm (l x w x h) in l painted in kg AM x 800 x AM x 800 x AM-4/A x 1200 x AM-4/B x 800 x for flammable liquids carrying the symbols F / F+ liquids classified as 1-3 WGK 69

70 RETENTION BASINS TYPE AO Use storage of small drums and cans RETENTION BASINS Type AO-2 galvanized conical construction can be stacked in one another strengthened by reinforced edging on both sides grid can be fitted later stirrups, 100 mm ground leeway for use with a pallet- or fork-lift truck red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized (EN ISO 1461) Type AO-1 Type AO-2 galvanized, with PE inlay galvanized grid PE inlay foil sheeting Individual construction on request Type AO-4/B Type AO-4/A 70 Type Dimensions Retention capacity Weight in mm (l x w x h) in l painted in kg AO x 800 x AO x 800 x AO-4/A 1200 x 1200 x AO-4/B 800 x 2400 x for flammable liquids carrying the symbols F / F+ liquids classified as 1-3 WGK

71 RETENTION BASINS TYPE WM/WO Use storage of 1-4 x 200 litre drums or small drums and cans 3 mm steel sheeting Type WM = with grid Type WO = without grid with feet, ground leeway 100 mm for use with a pallet- or fork-lift truck hot-dip galvanized (EN ISO 1461) RETENTION BASINS Type WM-2/200 Type WO-2/200 Type WM-4/200 Type WO-4/200 Type No. of Dimensions Retention capacity Weight drums in mm (l x w x h) in l in kg WM-2/ x 800 x WM-4/ x 1200 x WO-2/ x 800 x WO-4/ x 1200 x for flammable liquids carrying the symbols F / F+ liquids classified as 1-3 WGK 71

72 RETENTION BASINS TYPE SERIES 2000 : spray painted red RAL 3000 or hot-dip galvanized (EN ISO 1461) Grid: hot-dip galvanized Mobile: 2 swivel- and 2 fixed polyamide castors Ø 125 mm, one swivel castor with brake - construction height 155 mm drum supports are galvanized RETENTION BASINS Volume 228 l Volume 228 l Volume 228 l Type Dimensions in mm (l x w x h) 2000 spray painted 800 x 800 x galvanized Type Dimensions in mm (l x w x h) 2002 spray painted 800 x 800 x galvanized Type Dimensions in mm (l x w x h) 2004 spray painted 800 x 800 x galvanized Volume 228 l Volume 243 l Volume 243 l Type Dimensions in mm (l x w x h) 2006 spray painted 800 x 800 x galvanized Type Dimensions in mm (l x w x h) 2008 spray painted 1200 x 800 x galvanized Type Dimensions in mm (l x w x h) 2010 spray painted 1200 x 800 x galvanized Volume 243 l Type Dimensions in mm (l x w x h) 2016 spray painted 1200 x 800 x galvanized Volume 258 l Volume 258 l Volume 243 l Type Dimensions in mm (l x w x h) 2036 spray painted 1200 x 1200 x galvanized Type Dimensions in mm (l x w x h) 2038 spray painted 1200 x 1200 x galvanized 72 Type Dimensions in mm (l x w x h) 2018 spray painted 1200 x 800 x galvanized

73 RETENTION BASINS TYPE SERIES 2000 for flammable liquids carrying the symbols F / F+ liquids classified as 1-3 WGK Volume 243 l Volume 243 l Volume 243 l Type Dimensions in mm (l x w x h) 2020 spray painted 1200 x 800 x galvanized Type Dimensions in mm (l x w x h) 2022 spray painted 1200 x 800 x galvanized Type Dimensions in mm (l x w x h) 2024 spray painted 1200 x 800 x galvanized RETENTION BASINS : Clip-on rotation support Volume 258 l Type Dimensions in mm (l x w x h) 2026 spray painted 1200 x 1200 x galvanized Volume 258 l Type Dimensions in mm (l x w x h) 2030 spray painted 1200 x 1200 x galvanized Volume 258 l Volume 258 l Volume 258 l Type Dimensions in mm (l x w x h) Type Dimensions in mm (l x w x h) Type Dimensions in mm (l x w x h) 2028 spray painted 2029 galvanized 1200 x 1200 x spray painted 2033 galvanized 1200 x 1200 x spray painted 2035 galvanized 1200 x 1200 x 285 Volume 279 l Type Dimensions in mm (l x w x h) 2040 spray painted 2041 galvanized 2400 x 800 x 250 clip-on rotation support Type l drums l drums Volume 279 l Type Dimensions in mm (l x w x h) 2042 spray painted 2400 x 800 x galvanized Volume 279 l Type Dimensions in mm (l x w x h) 2044 spray painted 2400 x 800 x galvanized 73

74 RETENTION BASINS TYPE AW Use storage of drums or containers (IBC) made of 3 mm steel sheeting hot-dip galvanized grid stirrups, 100 mm ground leeway RETENTION BASINS Type AW , for 2 x 1000 litre IBCs red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized (EN ISO 1461) PE inlay raised platform with grid Individual construction on request e.g. stainless steel Type AWA 1000, for 1 x 1000 litre IBC Type AW 1000, for 1 x 1000 litre IBC Type AW 800, for 4 x 200 litre drums Type AWA , for 2 x 1000 litre IBCs 74 Type Dimensions Retention capacity Load capacity Weight in mm (l x w x h) in l in kg painted in kg AW x 1460 x AW x 1460 x AW x 1460 x AW x 1300 x AWA x 1460 x AWA x 1460 x for flammable liquids carrying the symbols F / F+ liquids classified as 1-3 WGK

75 RETENTION BASINS TYPE AW Use storage of 8-12 x 200 litre drums 3 mm steel sheeting 3-part galvanized grid stirrups, 100 mm ground leeway Type AW-8 galvanized red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized (EN ISO 1461) RETENTION BASINS Type AW-10 drum stand type FA drum stand type FA clip-on rotating support type RA Type AW-12 Type FA Type FA Type RA 200 Type No. of Dimensions Retention capacity Weight drums in mm (l x w x h) in l painted in kg AW x 1300 x AW x 1300 x AW x 1300 x for flammable liquids carrying the symbols F / F+ liquids classified as 1-3 WGK 75

76 RETENTION BASINS TYPE AS Use storage and filling of 200 litre drums RETENTION BASINS conical construction 2-part galvanized grid stirrups, 100 mm ground leeway galvanized sloping drum stand (5 ) for thorough emptying; with brackets to prevent slipping red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized (EN ISO 1461) Type AS-2 clip-on rotating support, type RA for positioning drums can shelf, type GR Charging using scissor gripper type LG Individual construction on request e.g. stainless steel Type AS-1 with support type RA Type AS-G 2 galvanized 76 Clip-on rotating support type RA Can shelf type GR-C Type No. of Dimensions Retention capacity Weight drums in mm (l x w x h) in l painted in kg AS x 800 x AS x 1200 x AS-G x 1410 x AS-G x 1410 x for flammable liquids carrying the symbols F / F+ Type AS-G for liquids with a flashpoint > 55 C liquids classified as 1-3 WGK

77 RETENTION BASINS TYPE AST Use mobile filling station reinforced edging as ledge for grid 2-part galvanized grid galvanized sloping drum stand (5 ) 2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake; construction height 220 mm handle red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized (EN ISO 1461) clip-on rotating support type RA for positioning drums RETENTION BASINS for flammable liquids carrying the symbols F / F+ for liquids classified as 1-3 WGK Type AST Type AW-F 1 TYPE AW-F Use mobile retention basins for 1-2 x 200 litre drums reinforced edging as ledge for grid galvanized grid 2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake; construction height 220 mm handle red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized (EN ISO 1461) fixture and belt for flammable liquids carrying the symbols F / F+ liquids classified as 1-3 WGK Type AW-F 2 with fixture and belt Type No. of Dimensions Retention capacity Weight drums in mm (l x w x h) in l painted in kg AW-F x 800 x AW-F x 800 x AST x 800 x Did you know that... All products are available in your desired colour on request. 77

78 RETENTION BASINS WITH PE INLAY Use storage of drums and containers (IBC) containing aggressive products RETENTION BASINS Type AW-2/PE retention basin made of steel sheeting PE inlay fixing frame with hot-dip galvanized grid Type No. of Dimensions Retention capacity Weight 200 I drums/1000 l IBC in mm (l x w x h) in l painted in kg AW-1/PE 1 / x 812 x AW-2/PE 2 / x 812 x AW-4/A/PE 4 / x 1212 x AW-4/B/PE 4 / x 812 x AW 1000/PE - / x 1472 x AW /PE - / x 1312 x hot-dip galvanized (EN ISO 1461) MADE OF STAINLESS STEEL TYPE VAW Use storage of drums containing aggressive products for non-flammable and flammable liquids carrying danger symbol F or F+ 2 mm stainless steel (material code X6CrNiMoTi 17-2), V4A 100 mm ground leeway Type VAW-2 with stainless steel grid (optional) stainless steel or galvanized grid Type No. of Dimensions Retention capacity Weight 200 I drums in mm (l x w x h) in mm painted in kg 78 VAW x 800 x VAW x 800 x VAW-4/A x 1200 x VAW-4/B x 800 x Type VAW-1

79 RETENTION BASINS CORNER BASINS TYPE EW Use storage of 1-5 x 200 litre drums Type EW-3 with splash protection wall type SW-3 for optimized use of space low structural height 100 mm ground leeway hot-dip galvanized grid hot-dip galvanized (EN ISO 1461) RETENTION BASINS splash protection wall type SW drum stand type FA can shelf type GR Type EW-5 with splash protection wall type SW 5 and drum support type FA FA Type No. of Dimensions Retention capacity Weight 200 I drums (l x w x h) (mm) (l) spray painted (kg) EW x 700 x EW x 700 x Type MR Use for flammable liquids carrying the symbols F / F+ liquids classified as 1-3 WGK EMPTYING DEVICE FOR DRUM RESIDUES TYPE MR complete emptying of steel drums safety device for 60 / 200 l steel drums manually tiltable max. 30 kg pluggable retention basin incl. 3/4" drain cook retention basin, 220 l volume with Certification (ÜHP) according to StawaR Type MR emptying of residues 200 I drum drum key Type Transport dimensions Installed dimensions Weight (l x w x h) (mm) (l x w x h) (mm) (kg) MR 842 x 800 x x 800 x drum key in stainless steel for 3/4" and 2" hole cover galvanized retention basin spray painted blue RAL 5012 or hot-dip galvanized (EN ISO 1461) 79

80 RETENTION BASINS WITH SPLASH PROTECTION WALL Use The safe way to handle materials that pose a threat to ground water, i.e. when filling (from) IBCs, drums and other outers or when cleaning oily parts RETENTION BASINS Type AW SW steel retention basin with galvanized grid splash protection wall made of galvanized steel sheeting, material strength 1.5 mm, height 1000 mm Type AW SW, with FA 200-2, with FA 60-3 Type 2032 SW, with FA 200-1, with GR-B red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized (EN ISO 1461) Type No. of Dimensions Retention capacity Weight 200 I drums/1000 l IBCs (l x w x h) (mm) (l) painted (kg) 2002/2003 SW 1 / x 800 x /2019 SW 2 / x 800 x /2033 SW 4 / x 1200 x /2043 SW 4 / x 800 x AW 1000 SW - / x 1460 x AW SW - / x 1300 x SMALL CAN TRAY TYPE KGW drum supports type FA 200-1, FA 200-2, FA 60-1, FA 60-2, FA 60-3 can shelves type GR-A, GR-B, GR-C rotating support type RA for flammable liquids carrying the symbols F / F+ liquids classified as 1-3 WGK Use especially for the storage of small cans Type KGW on a work bench Type KGW construction made of galvanized steel sheeting retention capacity litres 80 Type KGW 1 KGW 2 KGW 3 KGW 4 KGW 5 Dimensions in mm (l x w x h) 940 x 370 x x 470 x x 600 x x 600 x x 600 x 60 Retention capacity in l Weight in kg for flammable liquids carrying the symbols F / F+ liquids classified as 1-3 WGK

81 RETENTION BASINS TYPE AW 60 Use storage and filling of 60 l drums and small cans steel sheeting construction retention capacity 60 l type AW 60/M = with galvanized grid type AW 60 = without grid with feet Type AW 60-3/M red RAL 3000 green RAL 6011 grey RAL 7005 hot-dip galvanized (EN ISO 1461) RETENTION BASINS Type AW 60-1 Type AW 60-1/M with wheels Type AW 60-2/M Type FA 60-1 Type AW 60-1/M AW 60-2/M AW-60-3/M AW 60-1 AW 60-2 AW 60-3 No. of drums Type FA 60-3 Dimensions in mm (l x w x h) 800 x 500 x x 900 x x 1300 x x 500 x x 900 x x 1300 x 135 Type FA 60-2 with clip-on rotating support Weight painted in kg galvanized drum supports for the horizontal storage and filling of 60 l drums. For upright positioning on retention basins with grid. For 1-3 drums clip-on rotating support for rotating the drums 2 swivel + 2 fixed polyamide castors Ø 100 mm, one swivel with brake, construction height 125 mm for flammable liquids carrying the symbols F / F+ liquids classified as 1-3 WGK 81

82 DRUM STACKING PALLET TYPE FSP Use storage of drums and small cans; can be stacked and transferred using a pallet- or fork-lift truck or by crane DRUM STACKING PALLET storage space for 1-4 x 200 litre drums retention basin with galvanized grid stacking corners with crane eyes can be stacked (3 units) stirrups for pick-up by fork lift safety chain splash protection wall on 3 sides (FSP-G) walls made of mesh (FSP-D) Type FSP-2 spray finish hot-dip galvanized (EN ISO 1461) Type FSP-4 Type FSP-2 and FSP-2 D stacked Type FSP-2 G Type FSP-2 D galvanized 82 Type No. of Dimensions Retention capacity Weight drums in mm (l x w x h) in l painted in kg FSP x 760 x FSP x 1410 x FSP x 1410 x FSP-1 D x 760 x FSP-2 D x 1410 x FSP-4 D x 1410 x FSP-1 G x 760 x FSP-2 G x 1410 x FSP-4 G x 1410 x Construction Approval for flammable liquids carrying the symbols F / F+ (FSP 1-4, FSP 1-4 D) liquids with a flashpoint > 55 C (FSP 1-4 G) liquids classified as 1-3 WGK

83 CONTAINER BASIN TYPE CW Use storage of depositing containers filled with waste which are soiled with e.g. emulsions, lubricants, press oils or brake fluids for depositing containers according to DIN up to 10 cbm indoors or under roof sturdy steel construction closed basin 4 suction openings, protected by a removable grid, may also be used as level indicator with lengthwise runners, so the container rests in an angle of 5 suitable for fork-lift truck crane eyes for use with crane easy to clean CONTAINER BASIN red RAL 3000 green RAL 6011 grey RAL 7005 Type CW e.g. for roll-off containers according to DIN Suction opening and level indicator Type CW Construction Approval Type Dimensions in mm (l x w x h) CW 1 CW 2 CW 3 Typ WS 2300 x 2027 x x 2027 x x 2027 x 560 Retention capacity in l Other dimensions on demand! Surface load in kg Weight in kg flammable liquids with a flashpoint > 55 C liquids classified as 1-3 WGK 83

84 GROUND PROTECTION BASINS TYPE BSW GROUND PROTECTION BASINS Basin connecting piece, type WV Ground protection basin, type BSW Cross-shaped connecting piece, type KV Use to provide a surface that can be driven on 84 Access ramp, type AR Access corner piece, type AE edge clip Type Dimensions Retention capacity Weight in mm (l x w x h) in l in kg Ground protection basin type BSW x 1350 x Ground protection basin type BSW x 1350 x Ground protection basin type BSW x 1350 x Ground protection basin type BSW x 1900 x Access ramp type AR x 500 x Access ramp type AR x 500 x Access ramp type AR x 500 x Access ramp type AR x 500 x 78-6 Cross-shaped connect. piece type KV 24 Ø 120 / h 20-0,5 Basin connecting piece type WV x 55 x 30-2 Basin connecting piece type WV x 55 x 30-3 Basin connecting piece type WV x 55 x 30-4 Other dimensions and surface load capacities on demand! galvanized grid galvanized basin connecting piece, type WV galvanized cross-shaped connecting piece, type KV access ramp, type AR protective galvanized walls surface load capacity: 5000 kg/m 2 wheel load capacity: 500 kg can be driven on by either palletor fork-lift truck galvanized Construction Approval for flammable liquids carrying the symbols F / F+ liquids classified as 1-3 WGK

85 GROUND PROTECTION BASINS TYPE BSW Use to provide a surface which protects the ground from machine oil welded on location with/without galvanized grid galvanized GROUND PROTECTION BASINS galvanized basin connecting piece, type WV galvanized cross-shaped connecting piece, type KV access ramp, type AR galvanized protective walls Construction Approval for flammable liquids carrying the symbols F / F+ liquids classified as 1-3 WGK 85

86 DIESEL FILLING POINT TYPE TAW Use diesel filling station for usage on company premises according to VAwS in connection with 19 h WHG indoors or under roof DIESEL FILLING POINT Type TAW sturdy steel construction secured to the ground traversible threshold oil- and watertightness tested individual dimensions available RAL colours at choice funneling plate for wall closure splash protection wall collision protection Construction Approval Diesel fuel according to DIN TYPE KPS as type TAW, however with splash protection wall made of galvanized sheet, height 1000 mm, must be installed by customer traversible threshold (on 3 sides) spray painted platin grey RAL Type KPS Type Retention capacity (l) Dimensions (l x w x h) (mm) Weight (kg) KPS x 2000 x KPS x 2500 x Construction Approval Diesel fuel according to DIN 51601

87 DIESEL FILLING POINT TYPE KPM DIESEL FILLING POINT Diesel filling point in modular design easy installation of the modules basic module KPM 1 end module KPM 3 Construction Approval Diesel fuel according to DIN expansion module KPM 2 pending threshold Use for private filling stations according to VAwS in conjunction with 19 h WHG leaking diesel will be retained indoors or outside under roof sturdy steel construction easy expansion grace to modular design easy transport grace to mobile construction the separate modules are interlocked slip resistant surface that can be walked on prepared for attachment at the ground traversible threshold suspected threshold end threshold spray painted platin grey RAL 7036 Type Retention capacity Dimensions Weight in l in mm (l x w x h) in kg KPM x 2500 x KPM x 2500 x KPM x 2500 x

88 FILLING STATION TYPE FAS FILLING STATION Type FAS-4 with 2 drum pallets type FP-2 and can rest type KH Type FP-2 Use storage of and filling from drums retention basin with supporting feet and carrying beams for drum pallets 2 or 4 x 200 litre drums in a horizontal position clip-on building kit system low transport volume 88 Type FAS-2 Type No. of Retention capacity Dimensions Weight Load capacity drums in l in mm (l x w x h) in kg in kg FAS x 1550 x FAS x 2900 x FP x 750 x KH x 485 x galvanized drum pallets type FP-2 galvanized can rest type KH for flammable liquids carrying the symbols F / F+ liquids classified as 1-3 WGK

89 DRUM SHELVES TYPE FR Use storage of drums in a horizontal position shelving system screwed together shelf for 200 litre drums or shelf for 60 litre drums can be stacked stacking corners with crane eyes shelf: hot-dip galvanized (EN ISO 1461) retention basin: spray painted hot-dip galvanized (EN ISO 1461) DRUM SHELVES Type FRA-2 + FR-2 clip-on rotating support type RA can stand type GS intermediate galvanized grid ZB galvanized grid for type FRA for flammable liquids carrying the symbols F / F+ liquids classified as 1-3 WGK Type FRA FR-1 Type FRA-2 + FR-2 + FR-3 Type No. of Capacity Dimensions Weight (kg) Load cap. drums (l) (l x w x h) (mm) painted / galv. (kg) Drum shelf FR-1 1x200 l 980 x 580 x Retention basin FRA x 800 x Drum shelf FR-2 2x200 l 1380 x 580 x Retention basin FRA x 1200 x Drum shelf FR-3 3x60 l 1380 x 580 x Retention basin FRA x 1200 x Can shelf GS 9 Rot. support 60 l drum RA-1 4 Rot. support 200 l drum RA-2 4 Type FRA FR-2 with can stand Type GS Type FRA shelves with intermediate grid clip-on rotating support type RA 89

90 FILLING POINT TYPE AFS Use storage of 50/60 litre drums in a horizontal position retention basin, 60 l volume shelving system for 1-3 drums can be stacked (max. 3 units) FILLING POINT retention basin: spray painted hot-dip galvanized (EN ISO 1461) shelving system: hot-dip galvanized (EN ISO 1461) Type AW GR AG FA 60 galvanized drum stand type FA 60 clip-on rotation support type RA 60 2 swivel and 2 fixed polyamide castors Ø 100 mm, one swivel castor with brake galvanized grid for flammable liquids carrying the symbols F / F+ liquids classified as 1-3 WGK Type AW GR AG FA 60 + castors Type AW AG FA Type No. of Dimensions Weight in kg drums in mm (l x w x h) painted / galvanized Retention basin AW x 500 x Grid galv. GR x 420 x 30-6 Shelving system galv. AG x 515 x Retention basin AW x 900 x Grid galv. GR x 820 x Shelving system galv. AG x 915 x Retention basin AW x 1300 x Grid galv. GR x 1220 x Shelving system galv. AG x 1315 x Drum support galv. FA x 270 x 60-2 Rotation support galv. RA x 270 x 80-4 drum stand type FA 60 rotating support type RA 60

91 FILLING POINT FOR CANISTERS TYPE KAS Use storage of and filling from canisters retention basin, 60 l volume shelving system can be stacked (max. 3 units) retention basin: spray painted galvanized (EN ISO 1461) shelving system: galvanized (EN ISO 1461) FILLING POINT FOR CANISTEERS Type AW GR AG AB galvanized and movable canister stand type AB (2 pieces per canister) galvanized grid for flammable liquids carrying the symbols F / F+ liquids classified as 1-3 WGK Type AW GR AG AB Type AW GR AG AB Type Dimensions Weight in kg in mm (l x w x h) painted / galvanized Retention basin AW x 900 x Grid galv. GR x 820 x Shelving system galv. AG x 915 x Retention basin AW x 1300 x Grid galv. GR x 1220 x Shelving system galv. AG x 1315 x Canister stand galv. AB 510 x 100 x Canister stands type AB (2 pieces/canister) 91

92 DRUM SHELVES inside storage length 1400 mm frame width 850 mm 200 l volume frame plastic coated capri blue RAL 5019 rail plastic coated pure orange RAL 2004 retention basins hot-dip galvanized drum stands hot-dip galvanized DRUM SHELVES 4 x 200 litre drums (horizontal) frame height 2000 mm retention basin 1380x1000x280 mm without grid 6 x 200 litre drums (horizontal) frame height 2500 mm retention basin 1380x1000x280 mm without grid 9 x 50/60 litre drums horizontal frame height 2000 mm retention basin 1380x1000x280 mm without grid Basic shelf item-no Basic shelf item-no Basic shelf item-no Expansion shelf item-no Expansion shelf item-no Expansion shelf item-no x 50/60 litre drums (horizontal) frame height 2500 mm retention basin 1380x1000x280 mm without grid Basic shelf item-no x200 l horizontal / 4x200 l vertical frame height 2000 mm retention basin 1380x1000x280 mm with grid Basic shelf item-no x200 l horizontal/4x200 l vertical frame height 2500 mm retention basin 1380x1200x255 mm with grid Basic shelf item-no Expansion shelf item-no Expansion shelf item-no Expansion shelf item-no Example for a combination Basic and expansion shelf clip-on rotation support 50/60 l item-no l item-no safety device to prevent pushing through item-no for flammable liquids carrying the symbols F / F+ 92 can stand item-no collision protection item-no for liquids classified as 1-3 WGK

93 SHELVES FOR SMALL CANS plug-in system l x w x h = 2000 x 1000 x 600 mm 5 levels, load capacity per level 150 kg with uniformly distributed load galvanized construction all retention basins with certification (ÜHP) in compliance with StawaR 4 galvanized grids 1 galvanized retention basin capacity 30 litres Basic shelf item-no Expansion shelf item-no galvanized retention basins capacity 30 litres Basic shelf item-no Expansion shelf item-no SHELVES FOR SMALL CANS 5 galvanized grids 1 galvanized retention basin 1200 x 800 x 360 mm capacity 200 litres item-no galvanized level panels 1 galvanized retention basin 1200 x 800 x 360 mm capacity 200 litres item-no basic and expansion shelf 2 x 5 galvanized grids 1 galvanized retention basin 2400 x 800 x 250 mm capacity 200 litres item-no basic and expansion shelf 2 x 5 galvanized level panels 1 galvanized retention basin 2400 x 800 x 250 mm capacity 200 litres item-no

94 DRUM CONTAINER TYPE FC Use storage of drums indoor and outdoor DRUM CONTAINER 100% retention volume lockable lid can be stacked (3 units) crane eyes suitable for pick-up by palletor fork-lift truck for metal bung-hole and L-Ring drums document pocket type FC-II with glassfibre hood as casing for drum pump hot-dip galvanized (EN ISO 1461) Type FC-I galvanized castors ambossed company name drum traverse type FT for flammable liquids carrying the symbols F / F+ for liquids classified as 1-3 WGK Type FC-I and drum traverse type FT Type FC-II galvanized Type FC-I for pick-up by crane 94 Type Dimensions Inner dim. Load cap. Retention cap. can be Weight in mm (l x w x h) in mm in kg in l stacked painted in kg FC-I 680 x 680 x 1170 Ø 620 / H units 84 FC-II 680 x 680 x 1480 Ø 620 / H Did you know that... We ve taken on apprentices since 1972

95 HAZARDOUS MATERIALS CABINETS TYPE GS Storage of drums, small cans or containers (IBC) retention basin with galvanized grid and feet, 100 mm ground leeway retention capacity litres fully closed construction made of galvanized steel sheeting with 1 or 2 lockable doors allows storage of both drums and pumps or funnels inside the cabinet load capacity 1000 kg/m 2 HAZARDOUS MATERIALS CABINETS Type GS-2 with an intermediate shelf retention basin spray painted: hot-dip galvanized (EN ISO 1461) Type GS-1 intermediate shelf for storing of small cans Type GS-4 Type GS-1 GS-2 GS-3 GS-4 Retention capacity in l Dimensions in mm (l x w x h) 840 x 690 x x 690 x x 1460 x x 1460 x 2465 No. of doors Weight painted in kg Construction Approval liquids with a flashpoint > 55 C for liquids classified as 1-3 WGK 95

96 HAZARDOUS MATERIALS DEPOTS HAZARDOUS MATERIALS DEPOT TYPE GD Type GD-B + GD-C spray painted finish Use storage of drums or other packing outers retention basin with galvanized grid stirrups, 100 mm ground leeway Type GD-A (indoor) splash protection walls safety chain Typ GD-B (outdoor) splash protection walls all weather glassfibre hood with gas compression springs barrel block Typ GD-C (indoor) lattice structured walls and hood to allow natural air circulation barrel lock hot-dip galvanized (EN ISO 1461) (images on p. 97) can shelf type GR drum stand type FA 60/200 intermediate galvanized grid type ZB rotating support type RA Type GD-A with can shelf type GR-C Type GD-C with can shelf type GR-B Small details are of great importance! Concave grip mould and barrel lock Construction Approval for liquids with a flashpoint > 55 C (GD-B) for liquids classified as 1-3 WGK 96 Type GD-B during charging using drum lifter type RS-II Type GD-B with drum stand type FA 60-3 Type Dimensions Retention capacity Weight in mm (l x w x h) in l painted in kg GD-A 1420 x 800 x GD-B 1455 x 830 x GD-C 1450 x 815 x for liquids with a flashpoint > 55 C (GD-A) for flammable liquids carrying the symbols F / F+ (GD-C) for liquids classified as 1-3 WGK 86-87

97 HAZARDOUS MATERIALS DEPOT TYPE GD-N Use storage of barrels and small cans indoor and outdoor can shelf GR-A can shelf GR-B natural air circulation made of galvanized steel sheeting storage of 2-4 x 200 litre drums retention basin with galvanized grid roof with gas compression springs can be locked GD-N: 2 hinged doors and stirrups for pick-up by a fork-lift GD-N/R: hinged front door, made of aluminium, can be used as access ramp HAZARDOUS MATERIALS DEPOT Type GD-N 2 galvanized, with intermediate grid galvanized spray painted finish (outside only) can shelf GR-C (see table below) intermediate grid ZB drum stand FA drum stand FA 60-3, ZB Type GD-N 2, spray painted finish drum stand FA Type No. of Retention capacity Dimensions Weight drums in l in mm (l x w x h) in kg GD-N x 1015 x GD-N x 1500 x GD-N/R x 1015 x GD-N/R x 1500 x in mm (l x w x h) GR-A can shelt 608 x 698 x levels 23 GR-B can shelf 608 x 698 x drum rest 60 l drum + 1 level 22 GR-C can shelt 608 x 698 x drum rests 60 l drum 22 FA drum stand 825 x 530 x drum 200 l 16 FA drum stand 825 x 1150 x drums x 200 l 28 FA 60-3 drum stand 595 x 1150 x drums x 60 l 24 ZB intermediate grid 1385 x unit with fixture 14 RA rotating support Type GD-N/R 4 galvanized Construction Approval for flammable liquids carrying the symbols F / F+ for liquids classified as 1-3 WGK 97

98 GAS CYLINDER CONTAINER TYPE GFC-M Use outdoor storage of gas cylinders GAS CYLINDER CONTAINER Type GFC-M without roof sturdy frame construction lockable wing doors in compliance with TRG 280 prepared for attachment at the ground component system with assembly instructions hot-dip galvanized (EN ISO 1461) Frame for small gas cylinders type GFG, stacked Type GFC-M with roof and 2 hinged doors support frame for small gas cylinders type GFG galvanized. For the space-saving storage of gas cylinders up to 11 kg, can be stacked (2 units) gas cylinder trolley type GFW for easy and secure transport of gas cylinders Ø 220 mm. With rubber wheels, spray painted red RAL 3000 Gas cylinder trolley type GFW galvanized floor grid support for the secure storage of gas cylinders Ø 220 in an upright position, with securing chain. 98 Type GFC-M 0 GFC-M 1 GFC-M 2 GFC-M 3 GFC-M 4 GFC-M 5 Dimensions in mm (l x w x h) without/with roof 1085 x 1085 x 2060 (only with roof) 2100 x 1085 x 2060/ x 1500 x 2060/ x 1500 x 2060/ x 1500 x 2060/ x 2100 x 2060/2180 max. capacity (gas cylinder Ø 220 mm) Weight in kg without/with roof / / / / /280 galvanized floor grid, suitable in case of uneven surface lockable 2-hinged door, suitable for the handling with gas-cylinder pallets

99 GAS CYLINDER CONTAINER TYPE GFC Use outdoor storage of gas cylinders according to TRG 280 Type GFC with access ramp sturdy frame construction roof and back wall made of steel sheeting lockable wing door door and side walls made of wire-grate prepared for attachment at the ground with/without floor grid gas cylinders are secured by chains GAS CYLINDER CONTAINER access ramp type AR gas cylinder trolley type GFW Individual construction on request Type Dimensions max. capacity in mm (l x w x h) (Ø 250 mm cylinders) GFC 3050 x 1300 x single cylinders or 2 pallets with 12 cylinders or 1 pallet with 12 cylinders + 24 single cylinders Individual construction of type GFC 99

100 GAS CYLINDER DEPOTS TYPE GFD MOBILE DEPOT Use storage of gas cylinders in compliance with TRG 280 particularly useful when gas cylinders must be available on various locations GAS CYLINDER DEPOTS sturdy construction made of steel with a roof and intermediate level with 2 carrying arms and 2 wheels door and walls made of wire-grate available for 2 or 4 x 11 kg bottles door can be locked using a padlock (not included) hot-dip galvanized (EN ISO 1461) Type GFD-R STATIONARY DEPOT Use for indoor and outdoor storage of gas bottles in compliance with TRG Type GFD-L Type GFD-G Type Dimensions No. and type Capacity Weight in mm (l x w x h) of doors (11 kg bottles) painted/galv. in kg GFD-R2 520 x 500 x / wire-grate 2 48 / 52 GFD-R4 860 x 500 x / wire-grate 4 62 / 66 GFD-L/1 840 x 690 x / with holes 10 - / 75 GFD-L/ x 690 x / with holes 20 - / 150 GFD-G/1 840 x 690 x / closed 10 - / 91 GFD-G/ x 690 x / closed 20 - / 182 galvanized steel sheeting a choice of a closed construction or a construction with natural air circulation, i.e. with holes in the door and side walls with rear wall, floor and intermediate level with barrel lock kit-form - easy to assemble

101 PROTECTIVE CONTAINER ZERO-Box Use reduces the risk of internal or external fire when hazardous materials such as dirty cleaning rags are stored in plastic containers; fitted with a pressure release feature in accordance with laws and regulations on avoiding and/or dealing with such hazards e.g. - act laying down industrial health and safety standards - act covering place of work - act covering safety aspects at - the place of work - chemical law - act covering hazardous materials sturdy construction made of steel sheeting door closes automatically throw-in lid closes automatically fits all kind of plastic containers available in two sizes inclusive warning stickers and/or marking powder coated red RAL 3000 other RAL colours available on request PROTECTIVE CONTAINER ZERO-BOX Type Z 750 Did you know that... Type Z 500 Type Z 750 Type Dimensions Weight Doorway Diameter of in mm (l x w x h) approx. in kg in mm (w x h) Throw-in in mm Z x 585 x x Z x 850 x x in the case of an accident involving plastic containers used in conjunction with hazardous materials, the Wussten person Sie respon- schon... sible is fully liable according to both criminal and civil law. 101

102 SHELVING BASINS TYPE RW Use storage of environmentally hazardous materials retrofitting in existing shelf installations as floor or suspended trough SHELVING BASINS collecting volume according to the statutory requirements variable shelf widths, shelf loads, number of shelf levels can be extended infinitely variable in all dimensions and material wall thickness different trough designs according to graphic representation with or without bottom driving legs hot-dip galvanized (EN ISO 1461) Pallet shelf with shelf troughs type RW shelving basins variable inserts drum storage blocks for filling safety device to prevent pushing through insertion angle collision protection splash protection walls Individual construction on request e.g. stainless steel View of a shelf field with floor trough Construction Approval for flammable liquids carrying the symbols F / F+ for liquids classified as 1-3 WGK grid grid grid 102 Suspended trough type EHW Type RW without grid shelf, on beams support Type RW with feet and grid shelf

103 PALLET SHELVES TYPE PR Use storage retrofitting in existing shelf installations variable shelf width, shelf loads, number of shelf levels can be extended infinitely variable in all dimensions and material wall thickness complete pallet shelf installations with planning spray painted in RAL colours at choice hot-dip galvanized (EN ISO 1461) PALLET SHELVES Pallet shelf with collision protection and shelving basins type RW with grounding/potential compensation floor or suspended trough shelf troughs with variable inserts grid shelves drum storage blocks for filling safety device to prevent pushing through insertion angle collision protection fire extinguishing installations fire alarm lockable design through wing or sliding doors grounding/potential compensation Construction Approval for flammable liquids carrying the symbols F / F+ for liquids classified as 1-3 WGK Pallet shelves with shelving basins type RW Did you know that... We plan and design according to on-site conditions 103

104 HEATING CHAMBERS TYPE WK Use for heating up materials for production preparation storage of temperature-sensitive construction parts constant storage temperatures for indoor and outdoor areas HEATING CHAMBERS Type WK standard or explosion-proof design doors with cremorne bolts electric, steam or hot water heating system white RAL 9002 special paint types on request Type WK for the heating of activators for production temperature sensors for media lighting venting inspection window galvanized interior lining Construction Approval for flammable liquids carrying the symbols F / F+ for liquids classified as 1-3 WGK 104 Type WK for the storage of condensers Type WK with weather protection of the heating pipes

105 DEPOT CONTAINERS TYPE CR Type CR (isolated construction) Type CR interior equipment for drums and cans in horizontal and vertical position Type CR with suction extraction at work place Use room for refilling or storage in indoor or outdoor areas or as building site container natural or technical venting wing or sliding doors movable with or without insulation for walking or driving inside collecting basins with different inserts, e.g. PE etc. rugged steel construction with 5 mm trough plates collecting volume according to the statutory requirements, up to 100% of the storage volume in water protection areas white RAL 9002 special paint types on request heating / air conditioning drum storage block for filling reposing drums grid shelves / pallet shelves lighting (also in explosion-proof design) fire-extinguishing installations explosion-proof venting device for suction extraction of trough contents suction extraction at work place galvanized lattice grid shelves, stainless steel or plastic emergency shower / emergency cubicle adjustable feet gas warning device grounding / potential compensation Construction Approval for flammable liquids carrying the symbols F / F+ for liquids classified as 1-3 WGK DEPOT CONTAINERS 105

106 SHELF CONTAINERS TYPE CE Use for the safe storage of environmentally hazardous materials indoor and outdoor premises in connection with different roofing of passages also suitable as large storage facility SHELF CONTAINERS Type CE number and height of the storage levels according to requirements natural or technical venting isolated and heating (e.g. to prevent freezing) retention basins with grid retention basins with variable inserts, e.g. PE etc. sturdy steel construction with 5 mm trough plates retention capacity in accordance with the statutory standards, up to 100% of the storage volume in water protection areas spray painted in RAL colours at choice Type CEH isolated and heating Type CE 106 Type CE Type CE Type CEH, with 100% of the storage volume

107 SHELF CONTAINERS TYPE CE Type CEN with natural venting for flammable liquids wing and sliding doors, sliding canvas manual / electric rolling door heating / air conditioning drum storage blocks for filling lying drums shelves lighting (optional explosion-proof design) fire extinguishing installations tailor-made to requirements explosion-proof fan for suctionextraction of trough contents galvanized lattice grid shelves, stainless steel or plastic emergency shower / emergency cubicle adjustable feet gas warning device grounding / potential compensation SHELF CONTAINERS Type CE with rolling door Type CEN with natural venting for flammable liquids Type CE Type CE Type CEH isolated and heating Length from 2000 mm to 8300 mm Width from 850 mm to 3000 mm Height from 1000 mm to 7400 mm Storage levels from 1 to 4 Retention volume from 10% to 100% of the storage volume Construction Approval for flammable liquids carrying the symbols F / F+ for liquids classified as 1-3 WGK 107

108 SHELF CONTAINER INSTALLATIONS Use for the safe storage of environmentally hazardous materials (inflammable/poisonous/fire promoting agents as well as acids and lyes) according to statutory regulations SHELF CONTAINER INSTALLATIONS mobile, can be extended roofed area for loading and unloading insulated to prevent frost with fire protection partitions with integrated filling spaces roofing with trapezoidal plates, light bands etc. various retention-basin installations for fire-extinguishing water trough parking spaces variations of retention basins: - steel / stainless steel - PE inserts - coatings steel / concrete design according to local and economical circumstances Completely from one source economical planning discussions with competent authorities / approvals supply and assembly 108

109 SHELF CONTAINER INSTALLATIONS SHELF CONTAINER INSTALLATIONS floor insulation of aisles closing of the aisles with integrated doors heating / air conditioning aisle lighting (optionally in explosionproof design) fire extinguishing installations tailormade to requirements / fire alarm installations emergency shower / emergency cubicle fire extinguishing water barriers gas warning installation other safety installations according to requirements grounding / potential compensation white RAL 9002 special paint types on request Construction Approval for flammable liquids 109 carrying the symbols F / F+ for liquids classified as 1-3 WGK 109

110 SAFETY CUBICLE TYPE FWF 90 Use storage of flammable dangerous materials according to DIN EN and TRbF 22 in working rooms Fire-resistant from inside and outside for 90 minutes SAFETY CUBICLE outside housing made of steel sheet high-quality inside paneling door stop with heat monitoring; the doors are closed in case of fire venting in every cabinet level floor retention basin 3 height-adjustable insert floors adjustable feet for aligning the cubicle suitable for pallet truck GS / CE-certificate fire protection examination by independent institute Type FWF 90 outside housing powder-coated grey RAL 7035 and yellow RAL 1018 (doors) or outside walls and doors in grey RAL 7035 indoor area grey RAL 7035 TYPE SIW Use for the safe storage of environmentally hazardous materials according to statutory regulations WGK 1-3 and storage of flammable liquids with a flashpoint > 55 C sturdy steel sheeting construction 4 galvanized shelves, height 60 mm, adjustable at 30 mm increments, retention capacity per basin 20 l, with certification (ÜHP) in compliance with StawaR reinforced hinged doors with 3-point closing mechanism with a lockable necessed cylinder handle housing powder-coated grey RAL 7035 doors powder-coated blue RAL Type Dimensions Weight Retention capacity in mm (l x w x h) in kg in l FWF 90/6 595 x 595 x FWF 90/ x 595 x SIW x 400 x SIW x 400 x Type SIW

111 F90 FIRE PROTECTION CONTAINER TYPE CB Use storage and handling of inflammable liquids with the symbols F /F+, poisonous and fire promoting agents use in indoor and outdoor areas Fire-resistant from inside and outside for 90 minutes mobile fire section no fire extinguishing installation necessary self-closing venting holes T30/T90 sliding or wing doors doors with magnetic stops and smoke closing device exhaust device with explosionproof fan FIRE PROTECTION CONTAINER Construction Approval for flammable liquids carrying the symbols F / F+ for liquids classified as 1-3 WGK 111

112 ACCESSORIES FIRE PROTECTION CONTAINER ACCESSORIES FIRE PROTECTION CONTAINER Switch cubicle with function push buttons Door adhesion magnet, door closing device, flash lamp device Advantages variable dimensions for indoor and outdoor areas no additional fire protection installations movable flexible implementation light weight high degree of heat insulation minimum assembly expenditure red RAL 3000 white RAL 9002 other RAL-colours on request explosion-proof fan Smoke detector for explosion endangered areas variable retention inlays fire alarm and fire extinguishing heating / air conditioning lighting, switch and plug sockets for explosion endangered area pallet shelves, grid shelves optical and acoustic alarm gas alarm system job exhaust fire protection lattice foam extinguishing nozzle Our standard is made to measure! connection for foam fire extinguishing system can shelf Did you know that The maximum storage capacity of our F90 container is 144 drums at 200 l each.

113 FIRE PROTECTION CONTAINER TYPE MCB Use storage and handling of inflammable liquids with the symbols F /F+, poisonous and fire promoting agents use in indoor and outdoor areas Fire-resistant from inside and outside for 90 minutes Type MCB/4 during charging using drum lifter type RS Retention basin made of 5 mm steel sheeting 100 mm ground leeway safety device to prevent pushing through grounding no fire extinguishing installation necessary mechanically, self-closing T 90 door exhaust air fan with a protective switchgear of an engine for the necessary air condition, exhaust air system is attached at the side FIRE PROTECTION CONTAINER red RAL 3000 white RAL 9002 other RAL colours on request Type MCB/IBC variable retention inlays fire alarm and fire extinguishing heating for explosion endangered areas lighting, switch and plug sockets for explosion endangered area grid shelves optical and acoustic alarm Type MCB/2 Type Capacity 200 l drum/ibc Retention capacity in l Dimensions in mm (lxwxh) MCB/1 1 / x 1060 x 2390 MCB/2 2 / x 1260 x 2190 MCB/4 4 / x 1660 x 2150 MCB/IBC - / x 1660 x 2690 Type MCB/1 Load capacity (KN/m 2 ) Weight in kg Construction Approval for flammable liquids carrying the symbols F / F+ for liquids classified as 1-3 WGK 113

114 COLLECTING POINTS ACCORDING TO TRGS 520 COLLECTING POINTS Mobile collecting point Use collection according to regulations for dangerous materials from households in compliance with TRGS 520 variable sizes of the reception and working areas can be extended infinitely equipment adapted to special requirements reception area insulated, working area not insulated exterior walls fire resistant for 90 minutes in cases where safety distances cannot be realized collecting volume according to statutory and local requirements Stationary collecting point Completely from one source economical planning discussions with competent authorities / approvals white RAL 9002 special paint types on request 114 supply and assembly

115 COLLECTING POINTS ACCORDING TO TRGS 520 Collecting point in modular design office fittings in the working area window with shutters movable reception table working place suction extraction emergency / eye shower grid shelves / pallet shelves explosion-proof heating / air condition electric equipment such as lighting, switches, plug sockets, etc. in explosion-proof design emergency cubicle washing basin safety cubicle roofed reception area COLLECTING POINTS Working place suction extraction Emergency shower and sanitary area Table suction extraction Special steel table, mobile Safety cubicle F90 partitions and doublewing doors IBC containers Chemical pallet Euro pallets Roofing Refilling table and writing desk RECEPTION AREA INTERMEDIARY STORAGE / WORKING AREA Emergency exit Doublewing door Construction Approval Writing desk Office chair Wardrobe Shower Washing basin Fluorescent tube box Grid shelf for cans for flammable liquids carrying the symbols F / F+ for liquids classified as 1-3 WGK 115

116 EXAMPLES OF INDIVIDUAL CONSTRUCTIONS INDIVIDUAL CONSTRUCTIONS Our standard is made to measure! 116

117 FA CINATING SOLUTIONS... Special Waste Containers , Used Battery Containers 121 Transport Pallet 121 Fluorescent Tube Box 122 Duo Container 127 Tank Container 128 Collecting Container 129 MobiCont Mobile Filling Stations Individual Constructions 138 HAZARDOUS MATERIALS CONTAINERS 117

118 HOW TO DEAL WITH HAZARDOUS GOODS For transport of environmental hazardous goods, the following laws, guidelines and regulations are to be observed among others: ADR European agreement governing international transport of hazardous goods by road RID International agreement governing transport of hazardous goods by rail IMDG-Code International Maritime code for Dangerous Goods GGVS Decree ROAD for hazardous goods GGVE Decree RAIL for hazardous goods GGVS Decree MARITIME for hazardous goods Construction Code Packing Group Danger Grade X I extremely dangerous Y II dangerous Z III slightly dangerous BAM DIBt IBC DIBt Intermediate Bulk Container (bulk packaging) German Institute for Technical Construction We have sold more than Hazardous Materials Containers throughout Europe 118 PRODUCT FINISHES We only use environmental friendly paints, i.e. lead- and chromate-free. Our standard colours are: red RAL 3000 green RAL 6011 grey RAL 7005 The demonstrated colours are only for orientation and cannot reflect the exact RAL colours. hot-dip galvanized in compliance with EN ISO 1461 Also available on request: sand blasted coatings/linings CERTIFIED QUALITY One of our main aims since the founding of the company has been and indeed still is to provide safe products. The development of foreign markets European and throughout the world have led to a continuous review of the implementation and documentation of the quality assurance system applied. In 1993, an audit was carried out by the TÜV-Zertifizierungsgemeinschaft e.v., the company was tested and issued with a certificate to document approval.

119 SPECIAL WASTE CONTAINER TYPE SAP-1 Volume 450 / 600 / 800 litres Use for the international transport of solids and paste-like substances according to the ADR/RID/IMDG codes, packing groups I, II and III Type SAP IBC according to standard DIN sturdy construction patented reinforced edging max. density 1,5 kg/l walls 2 mm, floor 2,5 mm through fork sleeves suitable for pick-up by pallet-, forklift truck or crane document pocket robust stacking corners with crane eyes can be stacked (3 units) 2 lid fasteners, lockable spring-assisted lid automatic lid lock in 270 position lid support in 70 position SPECIAL WASTE CONTAINER hot-dip galvanized in compliance with standard EN ISO 1461 PE foil bag PE inlay embossed company name Lid support in 70 position Type Volume Dimensions Weight Total permitted weight in l in mm (l x w x h) in kg in kg SAP x 1000 x SAP x 1000 x SAP x 1000 x Through fork sleeves UN-HOMOLOGATION 11 A/X/D/BAUER/ A/X/D/BAUER/

120 SPECIAL WASTE CONTAINER TYPE SAP Volume 450 / 600 / 800 litres Use for the international transport of solids and paste-like substances according to the ADR/RID/IMDG codes, packing groups I, II and III SPECIAL WASTE CONTAINER Type SAP 800 IBC according to standard DIN sturdy construction patented reinforced edging max. density 1,5 kg/l walls and floor 3 mm through fork sleeves suitable for pick-up by pallet-, forklift truck or crane 4 lid fasteners spring-assisted lid automatic lid lock in 270 position lid support in 70 position robust stacking corners with crane eyes lid seal document pocket lockable hot-dip galvanized in compliance with standard EN ISO 1461 PE foil bag PE inlay embossed company name lid support in 70 position automatic lid lock in 270 position UN-HOMOLOGATION 11 A/X/D/BAUER/ A1/X/D/BAUER/ Type SAP 800 with PE inlay Type Volume Dimensions Weight stackable Total permitted in l in mm (l x w x h) in kg weight in kg SAP x 1000 x units 838 SAP x 1000 x units 1175 SAP x 1000 x units 1430 PE-Foil bag, 100 pieces per roll UN-APPROVAL Did you know that... We have sold more than Hazardous Materials Containers throughout Europe.

121 USED BATTERY CONTAINERS TYPE SAP 600 K Use for the international transport of used batteries Type SAP 600 K Type SAP 601 K TYPE SAP 601 K IBC according to DIN sturdy construction made of 3 mm steel sheeting lockable spring-assisted lid and support in 70 position lid locks automatically in 270 position changeable PE-inner with edging to fit over container rim, resistant to sulphuric acid; robust and hard-wearing inner side of lid coated can be stacked (3 units) suitable for pick-up by pallet-, fork-lift truck or crane document pocket hot-dip galvanized (EN ISO 1461) The correct way to collect and store batteries sturdy construction made of 3 mm steel sheeting changeable PE-inner with edging to fit over container rim, resistant to sulphuric acid; robust and hard-wearing lid support in 70 position can be stacked (3 units) suitable for pick-up by pallet- or fork-lift truck, or hot-dip galvanized EN ISO 1461 UN-HOMOLOGATION 11 A/Y/D/BAUER/0348 TRANSPORT PALLET TYPE TP For the efficient and secure transport of e.g. plastic drums etc. USED BATTERY CONTAINERS Type TP stacked on Type SAP 800 Type TP frame of the SAP with balustrade on 3 sides and a double-wing door that can be locked can be stacked on hazardous materials containers with a frame measuring 1200 x 1000 mm Type Volume Dimensions Weight in kg stackable Total permitted in l in mm (l x w x h) painted / galvanized weight in kg SAP 600 K x 1000 x units 1224 SAP 601 K x 960 x units 1224 TP 1200 x 1000 x hot-dip galvanized (EN ISO 1461) 121

122 FLUORESCENT TUBE BOX TYPE SL FLUORESCENT TUBE BOX Type SL 200 galvanized, Type SL-D 150 spray painted 122 Inlays for Type SL-D galvanized Type SL-D Type Dimensions stackable Weight in mm (l x w x h) painted in kg SL x 770 x units 148 SL-D x 770 x units 139 SL x 770 x units 177 SL-D x 770 x units 165 Capacity approx strips Ø 25 mm approx. 500 strips Ø 37 mm Use collection and transport of used fluorescent strips sturdy construction made of steel sheeting 100 mm ground leeway for pick-up by pallet- or fork-lift truck stacking corners with crane eyes can be stacked lockable Type SL with galvanized door Type SL-D with galvanized door and lid hot-dip galvanized (EN ISO 1461) removable inlay for type SL-D for separate collection of batteries, energy-saving lamps etc.

123 SPECIAL WASTE CONTAINERS TYPE SP Use Volume 100 / 240 litres for the international transport of hazardous solids and paste-like substances according to the ADR/RID/IMDG code, packing groups II and III lower frame suitable for pick-up by pallet- or fork-lift truck upper frame with stacking corners can be stacked lid with seal and fastenings document pocket lockable hot-dip galvanized (EN ISO 1461) SPECIAL WASTE CONTAINERS Type SP 240 Type Volume Dimensions Weight Total permitted (l) (l x w x h) (mm) (kg) weight (kg) SP x 550 x SP x 730 x Individual constructions e.g. stainless steel UN-HOMOLOGATION 1A2/Y/D/BAUER/ TYPE SF Volume 100 / 240 litres Use for the international transport of hazardous liquids according to the ADR/RID/IMDG code, packing groups II and III lower frame suitable for pick-up by pallet- or fork-lift truck upper frame with stacking corners and crane eyes dome-shaped lid Ø 300 (SF 100) Ø 400 mm (SF 400) can be stacked document pocket Type SF 240 Type Volume Dimensions Weight Filling inlet Max.density Max.density stackable in l in mm (l x w x h) in kg in mm kg/litre packing kg/litre packing group II group III SF x 550 x Ø 300 1,4 1,92 4 units SF x 730 x Ø 400 1,2 1,80 3 units UN-HOMOLOGATION 1A2/Y/D/BAUER/

124 HAZARDOUS MATERIALS CONTAINER HAZARDOUS MATERIALS CONTAINER TYPE SC Type SC type SC 285 Volume 240 / 285 litres Use for the international transport of hazardous liquids, solids or pastelike substances cylindrical construction with square lower and stacking frames filling inlet Ø 610 mm low filling height sturdy construction made of 3 mm steel sheeting dome-shaped lid with 8 butterfly bolts, can be locked in 90 position lockable can be stacked (3 units) suitable for pick-up by pallet-, forklift truck or crane ideal dimensions for transport (800 x 800 mm) document pocket easy to clean hot-dip galvanized (EN ISO 1461) 124 Type SC funnel with filling pipe and sieve Drum traverse type FT/M for type SC uses in one for liquids for solids for collecting F+ materials as a salvage drum (type SC 285) Type Volume Dimensions Filling height Weight Total permitted in l in mm (l x w x h) in mm in kg weight in kg SC x 800 x SC x 800 x drum traverse type FT/M for type SC 285 funnel with filling pipe and sieve in accordance with TRbF 60 for the collection of F+ materials in connection with a retention basin see page 74 embossed company name UN-HOMOLOGATION TYPE SC 240 1A2/X/D/BAUER/1.7/250 1A2/X/D/BAUER/534S UN-HOMOLOGATION TYPE SC 285 1A2/X/D/BAUER/1.4/250 1A2/X/D/BAUER/542S MAX. DENSITY Type Packing Group I II III SC 240 1,7 kg/l 2,6 kg/l 3,9 kg/l SC 285 1,4 kg/l 2,2 kg/l 3,3 kg/l CONSTRUCTION APPROVAL for flammable liquids carrying the symbols F / F+ liquids classified as 1-3 WGK

125 HAZARDOUS MATERIALS CONTAINER TYPE SCD Volume 240 / 285 litres Type SCD 240 Use for the international transport of hazardous liquids according to the ADR/RID codes, packing groups II and III as well as collection and storage in accordance with TRbF 60 outer container (with frame) serves as a retention basin inner tank (incl. stacking frame) and dome-shaped lid for indoor and outdoor use filling inlet Ø 610 mm funnel with filling pipe and sieve in accordance with TRbF 60 for the collection of F+ materials low filling height sturdy construction made of 3 mm steel sheeting dome-shaped lid with 8 butterfly bolts, can be locked in 90 position lockable can be stacked (3 units) suitable for pick-up by pallet-, forklift truck or crane ideal dimensions for transport (800 x 800 mm) document pocket easy to clean with dipstick to register any leakage max. density 1,8 kg/litre HAZARDOUS MATERIALS CONTAINER hot-dip galvanized (EN ISO 1461) embossed company name UN-HOMOLOGATION 31 A/Y/D/BAUER/ Fixture for padlock Type SCD 240, funnel with filling pipe and sieve Type Volume Dimensions Filling height Weight Total permitted in l in mm (l x w x h) in mm in kg Weight in kg SCD x 800 x SCD x 800 x CONSTRUCTION APPROVAL for flammable liquids carrying the symbols F / F+ liquids classified as 1-3 WGK 125

126 SPECIAL WASTE CONTAINER TYPE SAF Volume 450 / 600 / 1000 litres Use for the international transport of hazardous liquids according to the ADR/RID/IMDG code, packing groups II and III SPECIAL WASTE CONTAINER according to standard DIN sturdy construction made of 3 mm steel sheeting filling inlet Ø 457 mm with lockable dome-shaped lid pressure relief valve 3/4", 0,5 bar 2" coupling with plug max. density 1,5 kg/litres suitable for pick-up by pallet-, forklift truck or crane can be stacked document pocket hot-dip galvanized (EN ISO 1461) Type SAF 1000 with staggered dome-shaped lid (SAF 1000) funnel with stainless-steel sieve snap fastenings embossed company name Individual constructions on request e.g. stainless steel UN-HOMOLOGATION 31 A/Y/D/BAUER/0151 storage of liquids with a flash point > 55 C, 1-3 WGK only with retention basin, see page Type SAF 1000 with staggered dome-shaped lid Type Volume Dimensions Weight stackable Total permitted in l in mm (l x w x h) in kg weight in kg SAF x 1000 x units 848 SAF x 1000 x units 1092 SAF x 1000 x units 1759 Type SAF 450

127 DUO CONTAINER TYPE DC Volume 450 / 1000 litres Use for the international transport of hazardous liquids according to the ADR/RID/IMDG code, packing groups II and III according to standard DIN consists of outer and inner containers no retention basin necessary filling inlet Ø 457 mm with lockable dome-shaped lid pressure relief valve 3/4", 0,5 bar 2 x 2 coupling with plug max. density 1,8 kg/l can be stacked (3 units) folding step suitable for pick-up by pallet-, forklift truck or crane dipstick to register any leakage document pocket DUO-CONTAINER hot-dip galvanized (EN ISO 1461) funnel with stainless steel sieve embossed company name Type DC 1000 Individual constructions on request e.g. stainless steel UN-HOMOLOGATION 31 A/Y/D/BAUER/ collection and storage indoors and outdoors Type DC 450 = flammable liquids carrying the symbols F / F+ * Type DC 1000 = liquids with a flash point > 55 C liquids classified as 1-3 WGK *When fitted with a funnel and sieve (accessories), the DUO-CONTAINER type DC 450 can also be used as a container for collecting combustible liquids of classes F / F+ in accordance with TRbF 60. Type DC 450 Filling inlet with funnel and sieve Type Volume Dimensions Weight stackable Total permitted in l in mm (l x w x h) in kg weight in kg DC x 1000 x units 1100 DC x 1000 x units 2230 Your competent partner for over 40 years 127

128 TANK CONTAINER TYPE TCB Volume 1000 l Use for the international transport of hazardous liquids according to the ADR/RID/IMDG code, packing group II and III TANK CONTAINER 2" drain-cock in floor according to standard DIN sturdy construction made of 3 mm steel sheeting filling inlet Ø 457 mm with lockable dome-shaped lid pressure relief valve 3/4", 0,5 bar 2 x 2" coupling with plug max. density 1,5 kg/litres suitable for pick-up by pallet-, fork-lift truck or crane can be stacked (3 units) document pocket folding step hot-dip galvanized (EN ISO 1461) embossed company name Type TCB 1000 UN-HOMOLOGATION 31 A/Y/D/BAUER/135 storage of liquids with a flash point > 55 C and liquids classified as 1-3 WGK conical drain in floor with 2" cock folding step 128 Type Volume Dimensions Weight stackable Total permitted in l in mm (l x w x h) in kg weight in kg TCB x 1000 x units 1780

129 COLLECTING CONTAINER TYPE ASB Volume 250 / 450 litres Use IBC for the international transport of hazardous liquids according to ADR/RID collection and storage of flammable liquids of classes F / F+ according to TRbF 60 outer container serves as a retention basin with lid inner tank (screwed to outer) filling inlet Ø 400 mm funnel and stainless steel sieve lockable lid with gas compression springs can be stacked (3 units) suitable for pick-up by pallet-, fork-lift truck or crane for indoor and outdoor use max. density 1,8 kg/litre document pocket dipstick to register any leakage COLLECTING CONTAINER Type ASB 450 I inner tank outer tank 4 mm 2 mm 1. hot-dip galvanized hot-dip galvanized 2. stainless steel hot-dip galvanized 3. stainless steel stainless steel hot-dip galvanized: EN ISO 1461 stainless steel: mat. no filling or suction pipe with 2" coupling, threaded coupling and cap inner tank with sump under suction pipe 1" threaded coupling with plug embossed company name Type ASB 250 Type ASB 450 II Type No.of Volume Dimensions Weight inner tanks in l in mm (l x w x h) in kg ASB x 250 l x 815 x ASB 450-I 1 x 450 l x 885 x ASB 450-II 2 x 225 l x 885 x UN-HOMOLOGATION 31 A/Y/D/BAUER/ in line with building construction list A issued by DIBt 129

130 MobiCont TYPE M 800 Volume 800 litres Use storage of flammable liquids with a flash point > 55 C and 1-3 WGK international transport of hazardous liquids according to ADR/RID/IMDG code, packing groups II and III MobiCont sturdy, conical outer container made of 3 mm steel sheet as collision protection and as retention basin with 100 % retention volume, inclusive dipstick for leakage control sturdy, replaceable PE inner tank suitable for pallet truck, fork-lift truck and crane can be stacked (3 units) easy to clean Type M 800 spray painted red RAL 3000 other RAL colours available hot-dip galvanized (EN ISO 1461) stationary oil supply of machines Type M 800 with galvanized lid 2-part galvanized lid, with stacking corners and locking device square or cylinder lock filling/extraction lid with 3 x 2" and 1 x 3/4" thread swivel and fixed castors manual or electric pumps level indicator funnel for easy filling additional accessories on request square lock UN-HOMOLOGATION 31 HA1/Y/D/BAUER/ mobile oil supply of machines M 800 galvanized, stacked filling/extraction lid Type Volume Dimensions Weight in l in mm (l x w x h) painted in kg M x 1000 x CONSTRUCTION APPROVAL liquids with a flash point > 55 C liquids classified as 1-3 WGK

131 MobiCont TYPE MO 800 Volume 800 l Use for the mobile, internal oil supply approval for storage and transport sturdy, conical outer container made of steel sheet, as collision protection and as retention basin with 100 % retention volume, inclusive dipstick for leakage control sturdy, replaceable PE inner tank with screw-on lid Ø 215 mm spill basin suitable for pallet truck, fork-lift truck and straddle stacker MobiCont red RAL 3000 other RAL colours available hot-dip galvanized (EN ISO 1461) Type MO 800 mobile oil supply in a garage Equipment electric pump, 230 V, 5 m cable with plug, inclusive suction hose (2) closed hose reel (1) (inclusive 8 m hose DN 13) and flow counter (5) filling device 2" (4) venting valve 1" (6) shut-off valve 1" (7) level indicator (3) for storage 2 swivel + 2 fixed polyamide castors Ø 180 mm UN-HOMOLOGATION 31 A/Y/D/BAUER/5477 Type MO 800 in the detail Type Volume Dimensions Weight in l in mm (l x w x h) painted in kg MO x 1000 x 1045 / CONSTRUCTION APPROVAL liquids with a flash point > 55 C for liquids classified as 1-3 WGK 131

132 MobiCont TYPE MW 800 Volume 800 l Use fuel oil suplly for heaters, for indoor and outdoor areas MobiCont sturdy, conical outer container made of steel sheet, as collision protection and as retention basin with 100 % retention volume, inclusive dipstick for leakage control sturdy, replaceable PE inner tank filling/extraction lid with 3 x 2" and 1 x 3/4" thread suitable for pallet truck, fork-lift truck and crane can be stacked (3 units) galvanized lid with locking device, stacking corners and lid supports square or cylinder lock Type MW 800 supplying a heater with oil hot-dip galvanized (EN ISO 1461) tank heater ( TÜV -certified) filling/extraction lid with armatures e.g. filling device Euroflex 2 or 3 Anti-Heberventil (protection against leaking hose) venting valve level indicator level rod swivel and fixed castors Type MW as communicating system filling/extraction lid with one possible combination of armatures 1 filling device 2 tank heater 3 Euroflex 3 - tank armature 4 Anti-Heberventil 5 venting valve 6 level indicator Individual construction communicating system heaters are supplied with oil by 2 tanks so that in case of disregard of the level indication at one tank the supply is assured UN-HOMOLOGATION 31 HA1/Y/D/BAUER/5477 CONSTRUCTION APPROVAL 132 Type Volume Dimensions Weight in l in mm (l x w x h) in kg MW x 1020 x liquids with a flash point > 55 C for liquids classified as 1-3 WGK

133 MobiCont TYPE MD 800 Volume 800 l Use mobile diesel supply of building site vehicles, equipment etc. for the international transport of hazardous liquids of packing groups II and III according to ADR/RID/IMDG code sturdy, conical outer container made of steel sheet, as collision protection and as retention basin with 100% volume, inclusive dipstick for leakage control sturdy, replaceable PE inner tank MobiCont filling/extraction lid with 2" threaded nipple, venting valve, suction hose, ball valve for pump connecting, screwable level rod lockable hood with gas compression springs Type MD 800 Diesel supply of lawnmowers to the maintenance of e.g. football fields and golf courses red RAL 3000 other RAL colours available hot-dip galvanized (EN ISO 1461) manual or electric pumps swivel and fixed castors level indicator limit value transmitter further accessories on request Type Volume Dimensions Weight in l in mm (l x w x h) painted in kg MD x 1025 x suitable for pallet truck, fork-lift truck and crane UN-HOMOLOGATION 31 HA1/Y/D/BAUER/5477 CONSTRUCTION APPROVAL liquids with a flash point > 55 C for liquids classified as 1-3 WGK 133

134 FUEL CONTAINER FUEL CONTAINER TYPE MT Type MT Volume 450 / 600 / 1000 litres galvanized outer container serves as a retention basin with 100 % retention volume inclusive dipstick to register leakage galvanized inner tank (screwed to outer container and thus can be renewed) with opening for cleaning lockable sprung lid with runners for pick-up by pallet- or fork-lift truck swivel eyes for crane handling and securing loads approved for diesel or heating fuel coupling, stop-cock pressure relief and airing valve Type MT 450, fits all pick-ups Type MT 600 on open-back truck manual pump with hose 1,5 m / 3 m / 4 m electric pump 12 V / 24 V / 230 V, with 4 m hose and tapping nozzle with automatic shut-off, 4 m cable convertable electric pump (12 V to 24 V), with or without counter electric flow counter level indicator marginal safety valve galvanized loading traverse UN-HOMOLOGATION 31 A/Y/D/BAUER/7336 Type Volume in l Floor area in mm (l x w) Dimensions in mm (l x w x h) Weight (empty) without pump in kg Total permitted weight in kg CONSTRUCTION APPROVAL 134 MT 450 MT 600 MT x x x x 880 x x 880 x x 880 x liquids with a flash point > 55 C for liquids classified as 1-3 WGK

135 MINI TANK TYPE MT Volume 235 l Use suitable for filling building site vehicles, equipment etc. for the international transport of hazardous liquids of packing groups II and III for storage of flammable liquids classified as F / F+ Type MT 235 with manual pump outer container (inclusive frame) serves as a retention basin with 100 % retention volume inner tank (screwed to outer container) with stacking frame, dome-shaped lid and connections dipstick to register any leakage 2" coupling for pump threaded nipple with coupling airing valve lockable can be stacked suitable for pick-up by pallet-, fork-lift truck or crane for indoor and outdoor use MINI TANK hot-dip galvanized (EN ISO 1461) manual and electric pumps level indicator flow counter UN-HOMOLOGATION 31 A/Y/D/BAUER/031 manual pump, threaded nipple, level indicator, airing valve Type MT 235 All connections are located under the lid and thus protected from unauthorized access CONSTRUCTION APPROVAL flammable liquids carrying the symbols F / F+ for liquids classified as 1-3 WGK Type Volume Dimensions Weight Total permitted in l in mm (l x w x h) in kg Weight kg MT x 800 x Did you know that... Our Hazardous Materials Containers have a 5 year guarantee 135

136 DIESEL TANK TYPE DT Volume 450 / 600 / 1000 l Use suitable for filling building site vehicles, equipment etc. for the international transport of hazardous liquids of packing groups II and III for storage of flammable liquids carrying the symbols F / F+ (type DT 450) liquids with a flash point > 55 C (type DT 600 and 1000) DIESEL TANK outer container (inclusive frame) serves as a retention basin with 100 % retention volume inner tank (closed construction) filling inlet Ø 457 mm with lockable dome-shaped lid barrel lock for equipment casing airing valve 2" coupling with plug dipstick to register any leakage suitable for pick-up by pallet-, fork-lift truck or crane folding step for indoor and outdoor use Type DT 1000 with electric pump hot-dip galvanized (EN ISO 1461) manual pumps electric pumps level indicator (type DT 450) flow counter UN-HOMOLOGATION 31 A/Y/D/BAUER/092 Type DT 450 Type DT Type Volume Dimensions Weight Total permitted in l in mm (l x w x h) in kg weight in kg DT x 1000 x DT x 1000 x DT x 1000 x

137 TANK CONTAINER TYPE TC TANK CONTAINER Type TC 1000 with tank armatures Volume litres Use mobile oil and fuel oil supply of building site vehicles, equipment etc. tank armatures at the height of the loading area, thus easily attainable for the international transport of diesel and fuel oil Type TC 1000 UN-HOMOLOGATION 31 A/Y/A/BAUER/PA-06-W128 CONSTRUCTION APPROVAL liquids with a flash point > 55 C for liquids classified as 1-3 WGK flow counter electric pump 12 V / 24 V / 230 V inclusive 4 m hose with automatically closing tapping valve charge safety device fork sleeves for fork-lift truck suitable for crane retention basin dome-shaped lid NW x 2" couplings emptying device at the floor of the container with 2" ball valve for connection of pumps venting valve hot-dip galvanized (EN ISO 1461) Type Volume Dimensions Weight (kg) Total permitted (l) (l x w x h) (mm) (without pump) weight (kg) TC x 1350 x

138 EXAMPLES INDIVIDUAL CONSTRUCTIONS INDIVIDUAL CONSTRUCTIONS 138

139 FA CINATING SOLUTIONS... SECOMAT Glass Containers Paper Containers Used Clothes Containers Collecting Containers GeoTainer Comfort GeoTainer Underground Underground Location for Waste Bins Mini-Container System If you would like to get information about these products, please contact us. RECYCLING BANKS 139

140 SECOMAT MODEL S 1100 A product suitable for various applications - it protects the bin from vandalism and theft and access is limited to authorized persons only. Approved appearance on location. SECOMAT sturdy construction, screwed together, available in kit form or pre-assembled the hood has a moulded grip and can be locked gas compression springs support the hood making it easy to open or close prepared for anchorage to the ground standard SECOMAT design red RAL 3000 grey RAL 9007 other colours available on request rear and side panels, galvanized steel sheeting, spray painted grey RAL 9007 doors: galvanized steel sheeting, spray painted grey RAL 9007 floor: galvanized steel sheeting with rear and side panels plus doors......e.g. for the safe storage of deliveries. with three outside panels as a collecting point with rear and side panels, doors and a floor for collecting plastic bin-bags 140 Model Dimensions in mm Weight in kg (l x w x h) S x 1350 x 1650 mm 93

141 SECOMAT MODEL S 120 / S 240 A surround for 120 or 240 litre wheelie bins. Approved appearance on location. Efficient emptying using standard refuse collection trucks. attractive design sturdy construction made of galvanized steel sheeting, screwed together made of galvanized steel sheeting with floor prepared for anchorage to the ground powder coated RAL-colours as required SECOMAT S 120-D / S 240-D for the public sector covered throw-in door can be locked cigarette stubber : marking Model S 120-D Model S 240-K Model S 120-K Model Dimensions Weight in mm (l x w x h) in kg S 120-D 630 x 675 x S 240-D 735 x 750 x S 120-K 630 x 675 x S 240-K 735 x 750 x Model S 120-D and 120 litres wheelie bin S 120-K / S 240-K for the private sector throw-in with moulded grip, can be locked gas compression springs make it easy to open or close door can be locked 141

142 40 Years INNOVATION - CONSTRUCTION - PRODUCTION FORK-LIFT TRUCK ATTACHMENTS ENVIRONMENT-STORAGE HAZARDOUS MATERIALS CONTAINERS RECYCLING BANKS... made by