Fiber Blowing Machines

Size: px

Start display at page:

Download "Fiber Blowing Machines"

Caroline McBride
5 years ago
Views:

1 Fiber Blowing Machines Designed for Control. Powered to Perform.

High Performance Fiber Blowing FTTx - Access Network - Backbone Compared to traditional cable pulling techniques, fiber blowing provides a safer, more effcient installation and reduced risk of costly

For over two decades, Fremco has developed extensive industry knowledge and expertise through collaboration with Installation Technicians, Duct Manufacturers and Fiber/Cable Manufacturers.

Proven performance in the toughest environments Designed for exceptional reliability with minimal replacement parts Covers broad range of inside and outside applications Long-distance installation

2 High Performance Fiber Blowing FTTx - Access Network - Backbone Compared to traditional cable pulling techniques, fiber blowing provides a safer, more effcient installation and reduced risk of costly damage to fiber and cable. Jameson has partnered with Fremco A/S, an innovative Danish company specializing in the development and production of advanced fiber blowing equipment. For over two decades, Fremco has developed extensive industry knowledge and expertise through collaboration with Installation Technicians, Duct Manufacturers and Fiber/Cable Manufacturers. Jameson is proud to offer these high-performance fiber blowing machines to the North American market. Proven performance in the toughest environments Designed for exceptional reliability with minimal replacement parts Covers broad range of inside and outside applications Long-distance installation utilizing air-flow or water-flow Hydraulic powered units provide superior pushing force Advanced protection technology prevents damage to fiber or cable Responsive customer service with domestic maintenance/repair operations Backed By The BEST Factory Warranty In The Business! 1451 Old North Main Street - Clover, South Carolina customerservice@jamesonllc.com

Overview Jameson Fiber Blowing Machines NanoFlow MicroFlow MiniFlow Rapid PowerFlow MultiFlow Part Number J101-160601800 J101-10051 J101-10031 J101-10001 J101-10021 Application Inside Inside Outside

0 mm 4-12 mm 8-25 mm 8-32 mm Duct OD 3-10 mm 5-16 mm 7-20 mm 18-70 mm 18-70 mm Drive Power 24V Battery 110/230VAC Hydraulic Hydraulic Hydraulic Install Speed (Up To) 490 ft/min (150 m/min) 295 ft/min

3 Overview Jameson Fiber Blowing Machines NanoFlow MicroFlow MiniFlow Rapid PowerFlow MultiFlow Part Number J J J J J Application Inside Inside Outside Outside Outside Fiber Cable OD mm mm 4-12 mm 8-25 mm 8-32 mm Duct OD 3-10 mm 5-16 mm 7-20 mm mm mm Drive Power 24V Battery 110/230VAC Hydraulic Hydraulic Hydraulic Install Speed (Up To) 490 ft/min (150 m/min) 295 ft/min (90 m/min) Pushing Force - - Blowing Distance (Max.) Recommended Air Flow Recommended Air Pressure Dimensions L x W x H Weight Features 3,940 ft (1200 m) cfm (0-500 l/min.) psi (0-10 bar) 8.0 x 4.0 x 5.5 in (212 x 104 x 139 mm) 7.6 lb (3.4 kg) With Battery Fully Automatic Double Fiber Protection No Tools Needed Easy Load & Remove Pre-Connected Products One person installation Adjustable Torque & Speed Multi-Position 8,200 ft (2500 m) cfm ( l/min.) psi (8-16 bar) Machine: 9.9 x 5.9 x 8.5 in (250 x 150 x 220 mm) Control Unit: 7.8 x 5.9 x 3.2 in (200 x 150 x 80 mm) Machine: 21.0 lb (9.7 kg) Control Unit: 4.2 lb (1.9 kg) Preset Automatic Stop Auto-Buckle Detection Air Pressure/Flow Regulation Speed, Torque & Distance Display Adjustable Torque, Distance & Speed 325 ft/min (100 m/min) 0-88 lb (0-40 kg) 11,485 ft (3500 m) 35.3 cfm (1000 l/min.) psi (8-16 bar) 25.6 x 8.9 x 8.3 in (650 x 225 x 210 mm) 53.0 lb (24 kg) Use with Air or Water Push Force Monitor Quickly Adapts to Various Cable & Duct Sizes Adjustable Torque, Distance & Speed 260 ft/min (80 m/min) lb (0-125 kg) 32,810 ft (10000 m*) cfm ( l/min.) psi (8-12 bar) 25.6 x 9.0 x 13.8 in (650 x 230 x 350 mm) 83.8 lb (38 kg) Use with Air or Water Single Cable Only Quickly Adapts to Various Cable & Duct Sizes Adjustable Torque, Distance & Speed Multi-Position * Blowing Distance and Speed Depend on Type of Duct and Cable Used 260 ft/min 80 m/min lb kg 32,810 ft m* cfm l/min psi (8-12 bar) 27.5 x 9.0 x 13.8 in (700 x 230 x 350 mm) 88.2 lb (40 kg) Use with Air or Water Relining or Single Cable Quickly Adapts To Various Duct & Cable Sizes Adjustable Torque, Distance & Speed Multi-Position Made in Denmark 3

Fiber Blowing Machine For FTTH Fibers (EPFU) and Cables Extreme Portability & Cable Protection PLUS Battery Powered Convenience Part Number: J101-160601800 Effcient and automatic

Compatible with pre-connected cable; load/unload without cutting Fully automatic with unique double fiber protection Battery-powered (24V Li-Ion) Quickly load fiber and duct no tools

Synchronous drive wheels interrupt fiber installation due to incorrect torque selection. The machine also stops automatically if installation exceeds preset torque load on fiber.

Once the fiber reaches customer, the system immediately stops installation without damage to fiber.

with or without air Anodized aluminum construction is lightweight and durable Included: Plastic storage case protects NanoFlow and organizes accessories Two (2) long-lasting 24V 2.

4 Fiber Blowing Machine For FTTH Fibers (EPFU) and Cables Extreme Portability & Cable Protection PLUS Battery Powered Convenience Part Number: J Effcient and automatic FTTH installation. Fast, easy one-person set-up and operation using six adjustable speed settings and torque settings. Compatible with pre-connected cable; load/unload without cutting Fully automatic with unique double fiber protection Battery-powered (24V Li-Ion) Quickly load fiber and duct no tools needed One-person set-up and operation Advanced fiber protection technology stops installation to prevent fiber damage. Synchronous drive wheels interrupt fiber installation due to incorrect torque selection. The machine also stops automatically if installation exceeds preset torque load on fiber. These features, combined with an end-of-line Fiberstop attachment, allow effcient one-person FTTH installation. Once the fiber reaches customer, the system immediately stops installation without damage to fiber. Bright LED display shows Speed, Distance, Fiber Protection and Low-Battery Portable, compact design allows multiple blowing positions Integral air fitting allows fiber installation with or without air Anodized aluminum construction is lightweight and durable Included: Plastic storage case protects NanoFlow and organizes accessories Two (2) long-lasting 24V 2.0Ah Lithium-ion batteries and quick charger (up to 12-hour battery-life under normal usage) Two (2) adapter plate sets: 1.1 to 1.2mm and 1.4 to 1.6mm EPFU (2f to 12f) fiber. Other size adapters available. Five (5) Duct adapters for 3, 5, 7, 8, and 10mm duct Accessories (not included) Tripod with quick-attach adaptor, adjustable shoulder strap, reel holder bracket for pre-connected fiber, high-capacity 24V 4.0 Ah lithium-ion battery Application Fiber/Cable (OD) Duct Size (OD) Drive Power Install Speed (Max.) Blowing Distance (Max.) Recommended Air Flow Recommended Air Pressure Dimensions L x W x H Specifications Inside mm 3-10 mm 24V Battery 490 ft/min (150 m/min) 3,940 ft (1200 m) cfm (0-500 l/min.) psi (0-10 bar) 8.0 x 4.0 x 5.5 in (212 x 104 x 139 mm) Weight 7.6 lb (3.4 kg ) 4

Fiber Blowing Machine For FTTH Fibers (EPFU) and Cables AC Powered With Cable Protection PLUS Air Or Water Install Option MicroFlow incorporates unique fiber protection technology to automatically

Exceeding the preset motor torque limit also interrupts installation process. In either case, the machine automatically protects fiber from possible damage.

Part Number: J101-10051 Fiber Protection Technology Control Unit The MicroFlow control unit features a user-friendly touchscreen display for easy set-up and control of entire blowing process.

information during the blowing process: Actual Motor Torque, Actual Motor Speed and Distance Counter Application Fiber/Cable (OD) Microduct Diameter (OD) Drive Power Install Speed1 (Max.

5 Fiber Blowing Machine For FTTH Fibers (EPFU) and Cables AC Powered With Cable Protection PLUS Air Or Water Install Option MicroFlow incorporates unique fiber protection technology to automatically stops the machine and prevent costly damage to fiber optic cable during installation. As cable encounters an obstruction, it bends slightly in machine, triggering an integral stop sensor. Exceeding the preset motor torque limit also interrupts installation process. In either case, the machine automatically protects fiber from possible damage. After fiber protection technology stops machine, MicroFlow will attempt installation two more times before completely disengaging the machine. Part Number: J Fiber Protection Technology Control Unit The MicroFlow control unit features a user-friendly touchscreen display for easy set-up and control of entire blowing process. Easily adjust maximum motor torque and speed Preset specific fiber blowing distance Control Acceleration (start to maximum speed) and Deceleration (maximum speed to stop) Displays critical information during the blowing process: Actual Motor Torque, Actual Motor Speed and Distance Counter Application Fiber/Cable (OD) Microduct Diameter (OD) Drive Power Install Speed1 (Max.) Specifications Inside mm 5-16 mm 110/230VAC 295 ft/min (90 m/min) Blowing Distance1 (Max.) 8,200 ft (2500 m) Recommended Air Flow2 Recommended Air Pressure2 Machines Dimensions L x W x H Machine Weight cfm ( l/min.) psi (8-16 bar) 9.9 x 5.9 x 8.5 in (250 x 150 x 220 mm) Control Unit:: 7.8 x 5.9 x 3.2 in (200 x 150 x 80 mm) 21.0 lb (9.7 kg) Control Unit: 4.2 lb (1.9 kg) 1 Depending on type of microduct and cable. 2 Cooled and dried air. 5

RAPID Fiber Blowing Machine For Access Network and Backbone Part Number: J101-10031 Rugged, Compact Machine Design PLUS Integral Force Gauge Application Fiber/Cable (OD)1 Duct Diameter (OD) Drive

) 11,485 ft (3500 m) Recommended Air Flow3 Recommended Pressure3 Dimensions L x W x H 35.3 cfm (1000 l/min.) 120-230 psi (8-16 bar air) 25.6 x 8.9 x 8.

6 RAPID Fiber Blowing Machine For Access Network and Backbone Part Number: J Rugged, Compact Machine Design PLUS Integral Force Gauge Application Fiber/Cable (OD)1 Duct Diameter (OD) Drive Power Install Speed2 (Max.) Pushing Force Specifications Outside 4-12 mm 7-20 mm Hydraulic 325 ft/min (100 m/min) 0-88 lb (0-40 kg) Blowing Distance2 (Max.) 11,485 ft (3500 m) Recommended Air Flow3 Recommended Pressure3 Dimensions L x W x H 35.3 cfm (1000 l/min.) psi (8-16 bar air) 25.6 x 8.9 x 8.3 in (650 x 225 x 210 mm) MiniFlow Rapid features user friendly controls and intuitive machine operation. In addition, the machine is capable of installing cable at speeds up to 100m/min. Straightforward design provides ease of operation Built-In digital footage counter and tachometer Machine quickly adapts to different size cable and duct Robust construction utilizing stainless steel and anodized aluminum Cable Damage Prevention Miniflow Rapid features an integral force gauge that continually monitors cable pushing force; allowing operator to adjust settings or stop installation before damaging cable. Pushing Force Indicator Kilograms Weight 53.0 lb (24 kg) 1 Two sets of chains needed (3-8 mm / 4-12 mm). 2 Depending on type of microduct and cable. 3 Cooled and dried air. Additional Equipment Needed To Run Machine: Hydraulic Power Pack & Control Valve High Pressure Air Compressor Cable Seal Kit Kits contains a variety of cable seals to make blowing chamber as tight as possible, 6

Fiber Blowing Machine For Backbone and Access Network Part Number: J101-10001 Long Run Power and Simplicity Install With Air Or Water Application Fiber/Cable (OD)1 Duct Diameter (OD) Drive Power

) Up To 32,810 ft (10000 m) Recommended Air Flow3 Recommended Air Pressure3 Dimensions L x W x H Weight 282.5-423.8 cfm (8000-12000 l/min.) 120-170 psi (8-12 bar air) 25.6 x 9.0 x 13.

Easy to operate, the PowerFlow uses air or water to install fiber optic cable at a distance over six miles at speeds up to 260 ft./min.

7 Fiber Blowing Machine For Backbone and Access Network Part Number: J Long Run Power and Simplicity Install With Air Or Water Application Fiber/Cable (OD)1 Duct Diameter (OD) Drive Power Install Speed2 (Max.) Pushing Force Specifications Outside 8-25 mm mm Hydraulic Up To 260 ft/min (80 m/min) lb (0-125 kg) Blowing Distance2 (Max.) Up To 32,810 ft (10000 m) Recommended Air Flow3 Recommended Air Pressure3 Dimensions L x W x H Weight cfm ( l/min.) psi (8-12 bar air) 25.6 x 9.0 x 13.8 in (650 x 230 x 350 mm) 83.8 lb (38 kg) 1 Two sets of chains needed (5.5-8 mm / 8-25 mm). 2 Depending on type of microduct and cable. 3 Cooled and dried air. Easy to operate, the PowerFlow uses air or water to install fiber optic cable at a distance over six miles at speeds up to 260 ft./min. Robust design constructed for reliable performance in tough environments Simple setup and user-friendly machine operation Forward/ Reverse drive modes Water assisted blowing provides higher pressures suitable for larger cable or longer runs Easily adapts to various cable and duct sizes common to backbone installation Adjustable base tilts to accommodate duct entrance angle Cable Seal Kit Kits contains a variety of cable seals to make blowing chamber as tight as possible, Additional Equipment Needed To Run Machine: Hydraulic Power Pack & Control Valve High Pressure Air Compressor 7

8 Fiber Blowing Machine For Backbone and Access Network Part Number: J Maximum Power & Versatility! Single Cable Installation or Microduct Relining Specifications Application Fiber/Cable (OD) Duct Diameter (OD)1 Drive Power Outside 8-32 mm mm Hydraulic Designed for maximum performance and functionality, the MultiFlow easily converts from single cable installs to microduct relining applications. Rugged machine design constructed for reliable performance in tough environments Robust hydraulic drive provides increased power for larger cable sizes or multiple microducts Install Speed2 (Max.) Pushing Force 260 ft/min (80 m/min) lb (0-200 kg) Blowing Distance2 (Max.) 32,810 ft (10000 m) Recommended Air Flow3 Recommended Air Pressure3 Dimensions L x W x H Weight cfm ( l/min.) psi (8-12 bar air) 27.5 x 9.0 x 13.8 in (700 x 230 x 350 mm) 88.2 lb (40 kg) 1 Two sets of chains needed (5.5-8 mm / 8-32 mm) 2 Depending on type of microduct and cable 3 Cooled and dried air Simple setup and user-friendly machine operation Forward/Reverse drive modes Water assisted blowing provides higher pressures suitable for larger cable or longer runs Easily adapts to various cable and duct sizes common to backbone installation Adjustable base tilts to accommodate duct entrance angle Cable Seal Kit Kits contains a variety of cable seals to make blowing chamber as tight as possible, Additional Equipment Needed To Run Machine: Hydraulic Power Pack & Control Valve High Pressure Air Compressor 8

ACCESSORIES Hydraulic MultiPower Pack Powerful, Compact Versatility The Hyrdraulic PowerPack from

fluid filtering (with bypass) uses 25 micron filter element Reduced noise levels do not exceed LPA 88

5HP Honda gasoline engine provides superior reliability and high-output performance 196 cc 4-stroke

system effciency Dimensions (LxWxH): 25 x 21 x 20 in.

(54 kg) Hydraulic Control Unit Flexible Control for MiniFlow, Power Flow and MultiFlow Manual control

control of installation speed Integral pressure gauge monitors system hydraulic pressure

5 GPM (17 LPM) Pressure Gauge: 0-2320 psi (0-160 bar) Inlet and outlet hose length: 59 in.

9 ACCESSORIES Hydraulic MultiPower Pack Powerful, Compact Versatility The Hyrdraulic PowerPack from Jameson is the optimal power source for MiniFlow, PowerFlow, and MultiFlow Fiber Blowing Machines. High-flow output provides maximum 4.8 GPM (18 LPM) at 3300 RPM Delivers 1,450 psi (100 bar) nominal working pressure Integrated hydraulic fluid filtering (with bypass) uses 25 micron filter element Reduced noise levels do not exceed LPA 88 1 m / LWA 100 db(a) 5.5HP Honda gasoline engine provides superior reliability and high-output performance 196 cc 4-stroke OHV design offers fuel-effcient operation Air forced ring cooler ensures maximum cooling and improved system effciency Dimensions (LxWxH): 25 x 21 x 20 in. (630 x 530 x 510 mm) Weight (w/o Hydraulic Oil): 119 lbs. (54 kg) Hydraulic Control Unit Flexible Control for MiniFlow, Power Flow and MultiFlow Manual control lever provides instant forward and reverse cable direction Adjustable flow rate delivers precise control of installation speed Integral pressure gauge monitors system hydraulic pressure Specifications: Hydraulic control valve: psi (0-125 bar) and 4.5 GPM (17 LPM) Pressure Gauge: psi (0-160 bar) Inlet and outlet hose length: 59 in. (1500 mm) / each Control unit (L x W x H): 10 x 10 x 12 in. (250 x 250 x 310 mm) Total weight: 11 lbs. (5 kg) Cable Drum Rack Features a hand-operated mechanical lifting system with five height positions. Detachable frame. Drum diameter up to 1800 mm and 3,525 lbs (1600 kg.) max Trolley Transports MiniFlow, PowerFlow or MultiFlow. Ideal work station with mount for hydraulic control valve. 9

10 ACCESSORIES Y-Block Use to add a cable to existing duct with one cable installed X-Block Use to add a cable to existing duct with two cables installed Duct Joining Block For joining ducts in virtually any combination between 14mm to 1-1/2 ducts. Mini Blowing Block To straighten cable when blowing in opposite directions or to provide air-assisted manual installations over short distances. Uses the same cable seals as MiniFlow. 10

Fiberstop For use with NanoFlow and MicroFlow. The machine s fiber protection system safely stops the fiber when it reaches the Fiberstop, allowing fast effcient one-person installation.

Available for 5, 8, 10, and 12 mm microduct. Air Filter / Water Separator The use of an Air Filter/Water Separator with NanoFlow and MicroFlow helps ensure optimal performance and machine reliability.

FlowLub Fiber blowing lubricant greatly reduces friction and improves fiber cable installation.

FlowLUB 2000 is a special lubricant for fiber cable and microduct installation for use with the PowerFlow and MultiFlow. FlowLUB 5000 is for mini and micro cable to use with MicroFlow and MiniFlow.

11 Fiberstop For use with NanoFlow and MicroFlow. The machine s fiber protection system safely stops the fiber when it reaches the Fiberstop, allowing fast effcient one-person installation. Available for 5, 8, 10, and 12 mm microduct. ACCESSORIES Return Valve Mount return valve at end of duct run and apply compressed air to easily assist in removing faulty/damaged cable. Available for 5, 8, 10, and 12 mm microduct. Air Filter / Water Separator The use of an Air Filter/Water Separator with NanoFlow and MicroFlow helps ensure optimal performance and machine reliability. Relining Components Jameson offers a comprehensive range of components such as plugs, valves, seals and adaptors allowing effcient relining of microducts within existing sub-ducts. FlowLub Fiber blowing lubricant greatly reduces friction and improves fiber cable installation. Water-based lubricant from Jameson spreads evenly on inner wall of duct and cable surface leaving a thin film that dries with no residue. FlowLUB 2000 is a special lubricant for fiber cable and microduct installation for use with the PowerFlow and MultiFlow. FlowLUB 5000 is for mini and micro cable to use with MicroFlow and MiniFlow. Pneumatic/Hydraulic Hoses High quality hoses and couplers offered by Jameson are approved for use with the Hydraulic PowerPack as well as high-flow air compressors. Calibration Probe Use with Power Flow and MultiFlow to help determine condition (sharp curves, fractures, debris, etc.) of the duct prior to fiber cable installation. The integral 33KHz transmitter allows the probe to be located at the obstruction in the buried cable. The probe can also be mounted on a duct rod for manual distance location and ease of removal from duct. Cable Mouse Use with PowerFlow and MultiFlow. Cable mouse attaches to a single fiber cable (14 mm max.) and helps improve blowing distance. Available for 1, 1-1/4 and 1-1/2 duct sizes. 11

12 PD /2018

welcome to your best fiber blowing solution

FIBER BLOWING MACHINES welcome to your best fiber blowing solution - Backed by the B E S T factory warranty in the business! Company Profile Compared to the traditional pulling technique, fiber blowing