Motors Automation Energy Transmission & Distribution Coatings. Synchronous Alternators AN10 Line. New

Transcription

1 Motors Automation Energy Transmission & Distribution Coatings Synchronous Alternators AN10 Line New

2 Synchronous Alternators AN10 Line AN10 alternators were developed to be used in generator sets for the Marine and Oil & Gas industries. Designed with mechanical characteristics and specific features for machinery rooms with limited space in oil rigs and vessels, in compliance with the requirements established by the main marine classification societies, such as: ABS, DNV and Lloyd s. Technical Data Outputs: 1,100 to 3,000 kva Frames: 450 to 560 (IEC) Voltages: 440, 690 and 4,160 V Number of poles: 4 Frequency: 60 Hz Protection degrees: IP23 to IP55W Mountings: IM1001 and IM1101 Cooling systems: self-ventilated (IC01) and air-water heat exchanger TEWAC (IC81W) Other features on request. Attributes Special painting plan for harsh environments Electrical fectures for marine Mechanical fectures for marine Compact design Flexibility Optimized for operation Benefits Greater resistance and durability of the coatings, protecting components and windings against environments with oil moisture, salt, high humidity and high temperatures High efficiency, reactances according to application requirements and low harmonic distortion level Durability, reliability and mechanical resistance Ideal for applications with severe space restrictions Projects adapted to various applications and requirements Low maintenance cost and easy access to alternator components 2

3 Local Content Marine and Oil & Gas industries demands higher local content rate at equipment to be installed in oil rigs and offshore support vessels. Looking in this direction, WEG support the customers to achieve the requested local content rate by supplying products with high level of nationalization. Using a completely national workforce and with the main component parts of these alternators manufactured at WEG, the AN10 line of alternators reaches high levels of local content. LOCAL CONTENT Application Alternators with optimized performance, specially designed to operate at offshore support vessels and oil rigs. Used in main diesel generator sets, shaft generators, port or standby alternators. 3

4 Output per Frame - 60 Hz - 4 Poles Outputs in kva Frame V 690 V 1,550 1,550 4,160 V 1,550 1,900 1,900 1,850 2,125 2,125 2,125 2,250 2,250 2,250 2,500 2,500 2,500 2,700 2,700 2, ,000 Accessories Standard Accessories Temperature sensor on the stator winding Temperature sensor on the bearings Hot and cold air temperature sensor (IC81W) Temperature sensor at the water inlet and outlet (IC81W) Water leakage detector Space heater Optional Accessories Current transformer for droop Current transformer for differential protection Potential transformer for voltage regulator feedback Field contactor Automatic Voltage Regulator (AVR) Other accessories on request. 4 Special Features Height from the shaft center line to the alternator foot (dimension h) according to the customer s specification Footprint according to the customer s specification

5 Mounting Features Bearings Grease-lubricated rolling bearings (NDE bearing electrically insulated and shaft grounding brush on the DE) Expected lifetime L10h of 80,000h Terminal Box Mounted on top of the machine with availability for connection on the right, left and top Modularity Mechanical flexibility in order to meet the height from the diesel engine shaft to the baseframe Possibility of reversing the connection side of the radiator without changing the project Cooling Possibility of using single or double tubes radiators, with water inlet temperature according to the customer s specification Coils Form wound coils (rectangular wire) impregnated with the VPI system (Vacuum Pressure Impregnation), able to operate in bad weather, marine environment and with fundamentally switched loads Excitation Auxiliary exciter with permanent magnets (PMG) for powering the power circuit of the AVR 5

6 Technical Assistance WEG counts on a network of authorized technical assistance, including at the main marine industry areas in Brazil, fully trained and qualified to provide prompt high quality service. This network structure has the expertise to offer emergency service, provide technical support on the field, including checking s, commissioning of machines, among other services. Besides this network of authorized technical assistance, WEG counts on an office-based team consisting of technicians and engineers duly qualified and trained to provide remote and prompt field service support. With the application of state-of-the-art equipment, this technical team is available 24 hours, 7 days a week to support our customers so as to minimize the downtime of the operating vessels. Service WEG is market leader in motors and generators and also offers services of inspection, restoration and repowering of medium and large electrical machines, performed in the factory or in the field, including other brands, as follows: DC generators and motors J J Three-phase induction motors (squirrel cage or slip ring, low, medium and high voltage) J J Synchronous motors (with or without brushes, low, medium and high voltage) Turbogenerators Hydrogenerators Authorized Service Center 6

7 WEG Original Parts and Pieces After years in operation, in addition to the periodic checkups described in the maintenance plan, the alternators need restoration in order to keep working properly. For this restoration, we recommend that you use original spare parts supplied by the manufacturer. WEG team is available to promptly assist you in the correct identification of the component parts. 7

8 WEG Worldwide Operations ARGENTINA WEG EQUIPAMIENTOS ELECTRICOS San Francisco - Cordoba Phone: info-ar@weg.net WEG PINTURAS - Pulverlux Buenos Aires Phone: tintas@weg.net AUSTRALIA WEG AUSTRALIA Victoria Phone: info-au@weg.net AUSTRIA WATT DRIVE - WEG Group Markt Piesting - Vienna Phone: watt@wattdrive.com BELGIUM WEG BENELUX Nivelles - Belgium Phone: info-be@weg.net BRAZIL WEG EQUIPAMENTOS ELÉTRICOS Jaraguá do Sul - Santa Catarina Phone: info-br@weg.net CHILE WEG CHILE Santiago Phone: info-cl@weg.net CHINA WEG NANTONG Nantong - Jiangsu Phone: info-cn@weg.net COLOMBIA WEG COLOMBIA Bogotá Phone: info-co@weg.net FRANCE WEG FRANCE Saint Quentin Fallavier - Lyon Phone: info-fr@weg.net GERMANY WEG GERMANY Kerpen - North Rhine Westphalia Phone: info-de@weg.net GHANA ZEST ELECTRIC GHANA WEG Group Accra Phone: info@zestghana.com.gh INDIA WEG Electric India Bangalore - Karnataka Phone: info-in@weg.net WEG INDUSTRIES INDIA Hosur - Tamil Nadu Phone: info-in@weg.net ITALY WEG ITALIA Cinisello Balsamo - Milano Phone: info-it@weg.net JAPAN WEG ELECTRIC MOTORS JAPAN Yokohama City - Kanagawa Phone: info-jp@weg.net MALAYSIA WATT EURO-DRIVE - WEG Group Shah Alam, Selangor Phone: info@wattdrive.com.my MEXICO WEG MEXICO Huehuetoca Phone: info-mx@weg.net VOLTRAN - WEG Group Tizayuca - Hidalgo Phone: NETHERLANDS WEG NETHERLANDS Oldenzaal - Overijssel Phone: info-nl@weg.net PERU WEG PERU Lima Phone: info-pe@weg.net PORTUGAL WEG EURO Maia - Porto Phone: info-pt@weg.net RUSSIA and CIS WEG ELECTRIC CIS Saint Petersburg Phone: info-ru@weg.net SOUTH AFRICA ZEST ELECTRIC MOTORS WEG Group Johannesburg Phone: info@zest.co.za SPAIN WEG IBERIA Madrid Phone: info-es@weg.net SINGAPORE WEG SINGAPORE Singapore Phone: info-sg@weg.net SCANDINAVIA WEG SCANDINAVIA Kungsbacka - Sweden Phone: info-se@weg.net UK WEG ELECTRIC MOTORS U.K. Redditch - Worcestershire Phone: info-uk@weg.net UNITED ARAB EMIRATES WEG MIDDLE EAST Dubai Phone: info-ae@weg.net USA WEG ELECTRIC Duluth - Georgia Phone: info-us@weg.net ELECTRIC MACHINERY WEG Group Minneapolis - Minnesota Phone: VENEZUELA WEG INDUSTRIAS VENEZUELA Valencia - Carabobo Phone: info-ve@weg.net For those countries where there is not a WEG own operation, find our local distributor at WEG Group - Energy Business Unit Jaraguá do Sul - SC - Brazil Phone: energia@weg.net Cod: Rev: 00 Date (m/y): 12/2013 The values shown are subject to change without prior notice.