SOL RBEAM. A MEMBER OF THE MSAT GROUP est Solar Lights Brochure

Transcription

1 SOL RBEAM A MEMBER OF THE MSAT GROUP est.1978 Solar Lights Brochure

2 Solar Panel Panel Bracket Lamp Housing Lamp Source Solar Cells Module LED Lighting Pole Inspection Box Anchor Boat Controller Ground HYB Intelligence Controller Pole Foundation Battery Battery Room Computer or remote controlled Deep cycle battery

3 b b PV Panel Sub-system - Panel 35W-295W Designed for Solarbeam Solar Lighting System; PV Panel sub-system include panel and connectors; Solar Panel utilizes poly-crystalline and mono-crystalline silicon solar cells that combines high Wp (Watts Peak) output, affordability and efficiency. Features Robust quality managed by SolarBeam quality discipline, supplied by world class manufacturers Customization available Plug and play design for easy connection and installation a c t a c b Slot 8*6.5 x4 For mounting b Slot 8*6.5 x6 For mounting 2 MC4 connector (DC-) (30W~165W) MC4 connector (DC+) MC4 connector (DC-) (280W~295W) MC4 connector (DC+) PV Panel sub-system - Connectors Features, advantages & benefits With excellent aging resistance and UV endurance, it can be used in harsh environment. High current Environmentally sealed to IP67 Ambient temperature range: C Field serviceable contact removal system Simple crimp-and-poke application Tactile and audible mating feedback

4 PV Cable Sub-sytem - PV Cable sytem PV cable sub-system is for connecting PV panel and Charge Controller, Plug and Play connector ensures the easy wiring, IP67 protection.

5 Battery Sub-system (In-ground without CC) -VRLA battery Valve Regulated Lead Acid (VRLA) Battery integrates Gel electrolyte technology with long service life, high performance in deep discharging; it can be used in wide range of ambient temperature and keep good performance of constant power input. Gelatin electrolyte, 12 years lifespan in float service without acidification at 77 F (25 C) owes to a good recycle capability Low density electrolyte decelerates grid corrosion and guarantees long lifespan Germany fumeless silica electrolyte with stable performance European PVC-Si02 separator specialized for gel battery with low inner resistance and high porosity resulting in long service life Flooded electrolyte design with extra electrolyte ensures good thermal conduction and emission Patented radial grid design pasting with active substances improves current carrying capacity and performance, resulting a long life service High recovery ability, time and energy-saving Thick ABS (flame-retardant) container and cover, robust anti-vibration design, less leakage and bulge during transportation and operation, safe and reliable Water-proof Battery box housing IP68, against from water or humidity underground; 0.6m water-resistant underwater; housing of plastic ensures good performance of stability with non-chapping at -20 C Ex-proof ventilation pipe from box and lighting pole antrum, to keep balance of air pressure inside box. The pipe is made of low temperature resistant nylon, stable quality without distortion at -40 C

6 Battery Sub-system (In-ground without CC) Features & advantages Water-proof Battery box housing IP68, against from water or humidity underground; 0.6m water-resistant by 1 week underwater; housing of plastic ensures good performance of stability with non-chapping at -20 C. Conform to requirements of lead-acid utilization ventilation pipe from box and lighting pole antrum, to keep balance of air pressure inside box. The pipe is made of low temperature resistant nylon, stable quality without distortion at -40 C. Easy installation Tug for easy moving and construction; all plug and play connection.

7 Battery Sub-system(In-ground without CC) -VRLA battery

8 Battery Sub-system (In-ground without CC) Features, advantages & bene ts MC4 KB1 IP67 protection Integrated device ensure connection sealed and terminal positioning Large current Plug and play design for easy wiring Tactile and audible mating feedback Solar O -grid Control Unit (OCU) Gen 3.0 Charge Controller with Maximum Power Point Tracking -OCU Gen 3.0 MPPT CC Eco SolarBeam Solar O -grid Control Unit (OCU) Gen 3.0 Charge Controller with Maximum Power Point Tracking (OCU Gen 3.0 MPPT CC) is an advanced battery charger for o -grid photo-voltaic lighting system. The controller features a leading and smart tracking algorithm that maximizes the energy harvest from the PV and provides load control to prevent over discharge of the battery. The OCU Gen 3.0 MPPT CC is dedicatedly designed for professional PV applications in standalone solar lighting system. The battery temperature sensor adhered to it and its charging process has been optimized for long battery life and improved system performance. The product is polyurethane encapsulated for environment protection and preventing against invasion (IP67), could be commissionable and accessible by users via a personal computer.

9 Typical application Standalone o -grid solar lighting system Features and advantages Maximizes energy harvest Peak efficiency of over 97% (+20% efficiency higher than PWM charge controller), MPPT efficiency certified by DEKRA Almost no power losses to support system withstanding long period of no-day-light time and decrease maintenance cost Recognition of multiple power peaks during shading Good performance at low sun irradiation levels Dedicated design for solar lighting system Enables output of standard voltage (17.5V and 35V) for off-grid battery charging. Lower system initial cost Less expensive than other controllers and is affordable in smaller PV systems up to 380Wp. Enables system costs to be reduced by down-sizing the PV panel configuration. Multiple working modes to applications General purpose (all-time on) Dusk to dawn (default) Pre-set timing (enables users to pre-set working hours after dusk) Evening-morning working mode (lighting system operation triggered once dusk and working hours last before dawn) (enables users to pre-set working hours after dusk and before dawn*) *intelligent self-learning mode Slim size and fool-proof connectors Compact dimension makes it easier to install in equipment enclosures. Certified IP67 connectors Highly reliable Efficient electronics, a conservative thermal design and tropicalized result in high reliability and long life. Self-recovery ability It enables system to wake up from hibernate mode without manual interference due to long black-out days Automatic lighting control Enables lighting systems to work automatically according to pre-setting and sun irradiation intensity. Fully commissionable and accessible Enables user to commission and access charge controller and system via RS485 port to PC, make configuration upgradable after installation Extensive electronic protections

10 Fully protected against most system errors and faults Enhanced Surge protection to grow reliability, It is specially designed to withstand 2KV/4KV surge voltage, which is far beyond normal MPPT charge controller [typ. 500/1KV]. Longer battery life and compatible with both lead acid and Li-ion battery Efficient temperature compensation and 4-stage charging prolong battery life LED indicators make it visible to users with system operation status. Data* logging Records of key operating parameters of the solar lighting system and max 8 weeks of data logging *(panel VI, battery VIT, loads VI and daily harvest energy and power consumption) Easy visibility

11 Solar Off -grid Control Unit (OCU) Gen 3.0 Charge Controller with Maximum Power Point Tracking --OCU Gen 3.0 MPPT CC Pro SolarBeam Solar O -grid Control Unit (OCU) Gen 3.0 Charge Controller with Maximum Power Point Tracking (OCU Gen 3.0 MPPT CC) is a most leading solution in battery charger for o -grid solar lighting system. The controller features smart tracking algorithm that maximizes the energy harvest from the PV and provides load control to prevent over discharge of the battery. OCU Gen 3.0 MPPT CC Pro is able to work with Remote Monitoring Unit (RMU), the standalone solar lighting systems are networked and enable users to get system operation data remotely and further help predict systems heathy. The OCU Gen 3.0 MPPT CC is dedicated designed for professional PV applications in standalone solar lighting system. The battery temperature sensor adhered to it and its charging process has been optimized for long battery life and improved system performance. The product is polyurethane encapsulated for environment protection and preventing against invasion (IP67), could be commissionable and accessible by users via a personal computer. Typical application Standalone off-grid solar lighting system Features and advantages Maximizes energy harvest World class MPPT efficiency up to 99% (+20% efficiency higher than PWM charge controller) and electronics efficiency up to 97% to maximize solar energy harvest, efficiency certified by DEKRA Extremely low power losses (max 25mA for 12V system and max 15mA for 24V system) to grow durability at no-day-light time and decrease battery replacement cost Better performance at low sun irradiation levels Dedicated design for solar lighting system Enables output of standard voltage (17.5V and 35V) for off-grid battery charging. Lower system initial cost Less expensive and affordable for smaller PV (up to 380Wp). Cut down system initial cost by down-sizing the PV panel in configuration. Multiple working modes to applications General Purpose (all-time on, on/off controlled by manual switch button) Evening/Morning working mode (allow users to pre-set working hours after dusk and hours before dawn*) *intelligent self-learning mode Evening (enables users to pre-set working hours after dusk) Real Time working mode(on/off by real time) DynaDim Mode (Dimming time based on midnight) Evening/Morning (Dimming time based on dusk and dawn) Self-recovery ability It enables system to wake up from hibernate

12 mode without manual interference due to long black-out days Automatic lighting control Enables lighting systems to work automatically according to pre-setting and sun irradiation intensity. Fully commissionable and accessible Enables user to commission and access charge controller and system via RS485 port to PC, make configuration upgradable after installation Fully and remotely interactive communication RS485 port enables users to commissioning and access charge controller via PC, making configuration upgradable after installation. RS485 port allows users to connect charge controller to Remote Monitoring Unit (RMU), owing to RMU, users can get system real-time operation data and predict system healthy. Be able to communicate driver in luminaire via analog signal (1-10V interface) and work as Running Time Extension (RTE) to prolong lighting. Enhanced electronic protections Full protection against most system errors and faults. Enhanced Surge protection to grow reliability, specially designed to withstand 2KV/4KV surge voltage, which is far beyond normal MPPT charge controller [typ. 500V/1KV]. Longer battery life and compatible with both lead acid and Li-ion battery Efficient temperature compensation (-4.2 mv/k per cell). 4-stage charging (pre-charge, MPPT, equalization, float) prolongs battery life. Slim size and fool-proof connectors Compact dimension makes it easier to install in equipment enclosures. Certified IP67 connectors Highly reliable Efficient electronics, a conservative thermal design and tropicalization result in high reliability and long life. Easy visibility LED indicators make it visible to users with system operation status. Data* logging Records of key operating parameters of the solar lighting system and max 8 weeks of data logging *(panel VI, battery VIT, loads VI and daily harvest energy and power consumption) Self-recovery ability It enables system waken up from hibernate mode without manual interference due to long black-out days Automatic lighting control Enables lighting systems work automatically according to pre-setting and sun irradiation intensity.

13

14 Fool-proof connectors Installed inside of pole Features Water-proof & dust-proof, system IP65 (terminal to AC mainsfool-proof connectorsm (excluded) Fool-proof and Plug and Play connectors Battery temperature compensation Slim design and easily installed inside of pole Intelligent lighting control with dusk/dawn detection and timer Wide working temperature range Good safety protection Multiple load work mode selection Settable priority on AC mains mode or battery mode External RS485 communication port, easy setting and remote control

15 Dimension (mm) To load MX150L single row female harness plug, Red + Blue- To Panel MX150L single row female harness plug, Red + Blue M12 x 1.5 gore vent Thermal sensor To battery Red+ MC4, male Blue - KB1, female

16 Hybrid Control Unit Gen 2 (HCU 150B) Fool-proof connectors Installed inside of pole Features Water-proof & dust-proof, system IP66 (terminal to AC mains excluded) Fool-proof and Plug and Play connectors Battery temperature compensation Slim design and easily installed inside of pole Automatically switches to AC mode once battery capacity is insufficient Intelligent lighting control with dusk/dawn detection and timer Wide working temperature range Higher surge protection level, up to 10KV AC mains could support load independently even without battery; Load on/off time smart synchronization with AC mains signal; Good safety protection; Multiple load work mode selection; Settable priority on AC mains mode or battery mode; External RS485 communication port, easy setting and remote control;

17 Dimension (mm) To load MX150L single row female harness plug, Red + Blue- To Panel MX150L single row female harness plug, Red + Blue M12 x 1.5 gore vent Thermal sensor To battery Red+ MC4, male AC input Brown Blue Yellowgreen Blue - KB1, female

18 Solar LED Road Light BRP210 (12V DC powered) The new developed low power solar LED road lighting is dedicated for the lane in city and town, residential and village road, etc. Smart and slim designed housing creates a melodious and elegant appearance for roads. Higher efficacy luminaire in solar lighting system could save more size of PV panel and battery with less initiate price. It cares your light, safety and your investment. Features Optimized lens design, improved e cacy to lower down power consumption. Able to reduce of solar panel and battery initial investment 50Khrs lifetime 500hrs salt spray anti-corrosion High class PC material with super anti-uv and antiyellowing performance High pressure die-cast housing, to ensure mechanical strength and good thermal performance IP66 without glue Technical Parameters 12V DC NW: 2300lm, 2800lm, 3400lm CW: 2300lm,2800lm,3400lm 121lm/W - 128lm/W 75 ± K(NW),5700K(CW) DW3 MP1 Housing: Die-cast aluminium; Gasket: Heat resistant silicone rubber Frame: Grey Paint RAL7040; -40 C< Ta< 55 C 50,000 hours(70% lumen Ta = 35 C) Ø40-60mm pole, side entry

19

20 GreenVision Xceed (Solar) Lighting up streets and roads enhances the comfort, security and overall safety of our rapidly growing urban environments. Solarbeam Solar Green Vision Xceed makes an affordable solar LED road lighting solution that delivers sufficient light on your roads. It is designed to achieve better light uniformity and maximum spacing between poles for both pedestrian and vehicle road applications, and higher e ciency to save panel size and battery capacity in solar lighting system. With its diecast aluminium housing and Solarbeam LED platform, it is easy to maintain, has a long lifetime and a consistency you can count on. It also offers 3 housing sizes and a range of beam optics to fully cater to different road configurations and conditions. Owing to the Solarbeam latest hybrid charge controller, it still could work on AC grid. Green- Vision Xceed offers 30% of cost savings compared to outdated solar lighting, making it the perfect sustainable lighting solution for any emerging metropolis. Maximized energy savings Maximized energy saving with full compliance to road lighting safety standards due to the dedicated lens with accurate design Superior W/m2 performance delivered through different optics for greater flexibility to t different road applications Reliable and future proof Solid die-cast housing design with high ingress protection (IP66) and excellent thermal management ensure long life time for Fixture World class, fully approbated quality components (LED s/drivers/etc.) Tool-less opening of the housing and plug play design bring easy maintenance Safety and comfort Complies fully with M1 to M5 safety and road lighting standards in terms of luminance, uniformity and glare control High quality neutral white light with high colour consistency Applications City main road and high road Minor road Industrial park road Residential road

21 W 318 L 855 Type LWH=AxBxC(mm) 1. Small version 422x318x Middle version 522x318x136

22 Road-Flair (Solar) Designed for main roads, street and path, Solarbeam Solar Road Flair is a new and exciting product set to brighten your streets beyond imagination. Smartly-designed system can bring free energy to rural areas and cities the nice and safe environment. Super high lumen efficiency makes the cost of whole solar system significant lower than before. Solarbeam solar system coupled with Road- Flair, improves a country s sustainability drive and matches clean energy strategy. With the help of application expert will create the best environment for your municipality, benefitting local communities and boosting tourism and business. Application Roads Street Highways Parking Benefits High lumen efficiency 140 to 160 lumen per watt much higher than currently available solutions. Unique functional design Sleek, light-weight and well-designed luminaire. Control and dimming ready Supports stand-alone dimming functions Value for money / most competitive product in its segment Perfect for renovation, upgrading projects. Best in class LED lighting technology at an unmatched, competitive price.

23

24 Cash in on the sun SolarBeam (Pty) Ltd Head Office: 256 Kent Avenue Randburg. Johannesburg, 2125 Factory: 480 Chris Hani Road Briardene, Durban 4015 OFFICE: WEBSITE: