Applications. Standard Colors. Features. T1P Series LED Street Light (Ver2.0)

Size: px

Start display at page:

Download "Applications. Standard Colors. Features. T1P Series LED Street Light (Ver2.0)"

Adele McKinney
5 years ago
Views:

Applications Roadway lighting (Urban road, residential areas,

lots ) Standard Colors White Black Gray Features Unique patented IP68

lighting distributions available for various roadway applications;

conduction and radiation; Unmatched lighting performance, driver

1 Applications Roadway lighting (Urban road, residential areas, overpasses ) Public areas lighting (Theme parks, squares, parking lots ) Standard Colors White Black Gray Features Unique patented IP68 (highest protection level) LED light engines; Ergonomic and dedicated lighting distributions available for various roadway applications; Whole structure heating dissipation design with best thermal conduction and radiation; Unmatched lighting performance, driver stability and desirable lifespan; Stainless steel latches provide easy, tool-less access. Page1

2 Electrical Characteristics Model Input Voltage (V) Frequency (Hz) Drive Current (ma) Power (W) Efficacy (lm/w) Lumens (lm) Power Factor Power Efficiency LED Brand CCT (K) CRI 600 (9P2S) ±8 4500± (14P2S) ±8 4740± (9P2S) ±8 5800±320 T1P-1 AC / (14P2S) ±8 6120± (9P2S) ±8 6900± % 1000 (14P2S) ±8 7350± (9P2S) ±8 7800± (14P2S) ±8 8400±480 Lumileds (9P2S) ± ± (14P2S) ± ±640 T1P-2 AC / (9P2S) ± ± (14P2S) ± ± % 1200 (9P2S) ± ± (14P2S) ± ±960 Working environment & Packing Model Working Environment Storage Temperature IP Rating Surge Protection LED Life Span (h) Housing Material Pole Diameter (mm) Product Dimensions (mm) Carton Size (mm) N.W (kg) G.W (kg) T1P ~+50, Die-Cast -40 ~+50 IP67 10KV >50, *305*85 595*380*175 10%~90%RH. Aluminum T1P Note: Above data of weight are calculated based on MOSO brand driver, 60W/each module. Warranty 5-year limited warranty is standard on luminaire and components. Page2

3 T2S3106 T1S1107 T2S2105 IESNA Type II Short IESNA Type I Short IESNA Type II Short T2M2109 IESNA Type II Medium Light Distributions Page3

4 Page4

Patent IP68 Connector Mounting Bracket Four-bolt mounting brackets fit 60±3

5 Design Features Die-cast Cover LED Driver With standard 10KV protection, 1-10V dimming is optional. Patent IP68 Connector Mounting Bracket Four-bolt mounting brackets fit 60±3 mm pipe Die-cast Housing Stainless Steel Latches Provide tool-less entry Patented IP68 LED Light Engines With IK10 rated lens Page5

6 T1P Series LED Street Light (Ver2.0) Dimensions T1P 305 Package Drawing Installation Instruction Package Steps Product*1 Foam 1. Put the product into the carton with foam; 2. Put the installation instruction into the carton; 3. Seal the carton with tape. Carton Strapping Carton Tape Page6

7 Installation 1. Pull the two latches at side, open the cover. 2. Loosen the four M10 30 screws on the mounting bracket. 3. Connect the ground wire, neutral wire and live wire to the AC input (make sure it sufficiently grounded) 4. Insert the pole to the lamp after connecting the wire, tighten up the M10 30 screws on the mounting bracket. 5. Close the cover, then press and fasten the latches. Page7

Back View Front View T1P Series LED Street Light

0) Connectors Operation Guide Indicatrix: Female

Indicatrix: Female #4 Male Indicatrix Spin the

When the male indicatrix points between indicatrix

female terminals is extremely small, the

will be risks in its waterproof performance.

8 Back View Front View T1P Series LED Street Light (Ver2.0) Connectors Operation Guide Indicatrix: Female #1 Indicatrix: Female #2 Indicatrix: Female #3 Indicatrix: Female #4 Male Indicatrix Spin the male terminal clockwise. When the male indicatrix points between indicatrix female #2 and #3, and the gap between male and female terminals is extremely small, the connectors are well connected; otherwise, there will be risks in its waterproof performance. When the gap between male and female terminals is extremely small, if any looseness can be sensed, please spin the male terminal clockwise until tight. Page8

9 Maintenance Driver & Electrical Parts 1. Pull the two latches at side, open the cover. 2. Unscrew the screws at ends of the mounting panel. 3. Unscrew the two M4x12 screws on the cable clip. 4. Unscrew the waterproof connector from the driver, remove the mounting panel of driver. 5. Unscrew the screws at ends of the failed driver. 6. Replace the failed driver with a new one, tighten up all the screws and the connector. Maintenance finished. Page9

10 Ordering Information Sample Number: T1P-2-100GY-L IN Luminary Type Luminary Series Module Qty. System Power Housing Color LED Brand T Street light 1P 1P series 1 1 modules 30 30W WH White L Lumileds 2 2 modules 40 40W BK Black 50 50W GY Gray 60 60W 80 80W W W Lens Code CRI CCT Driver Brand 3106 Type II short 7 Ra K MO MOSO 1107 Type I Short 8 Ra K MW MEAN WELL 2105 Type II short 9 Ra K PH PHILIPS 2109 Type II Medium K IN INVENTRONICS AD OTH ADAYO OTHER Version History Change Date Version Description of Change Item From To 2017/05/24 Ver2.0 Datasheets Release Page10

Applications. Standard Colors. Features. T4B Series LED Street Light (Ver.2.1)

Applications. Standard Colors. Features. T4B Series LED Street Light (Ver.2.1) Applications Roadway lighting (Urban roads, residential areas, overpasses ) Public areas lighting (Theme parks, squares, parking lots ) Standard Colors Blue+Gray Gray Features Unique patented IP68 (highest