Liftall Slings Rated Capacities in Lbs

Size: px

Start display at page:

Download "Liftall Slings Rated Capacities in Lbs"

Eleanore Conley
6 years ago
Views:

NYLON SLINGS Steel Chokers also available upon request Common types available are listed below.

Select Length and Width ( Most slings at Staff are 2 width) additional widths available per special request.

Select Capacity: Note that One ply and Two ply slings are available. Capacity is also dependent on how it is used in lifting.

Basket Part # Eyes each End (EE) One ply (2 width) 3,200 1,250 6,400 EE1-802 Two ply (2 width) 6,400 5,000 12,800 EE2-802 Endless (EN) One ply (2

1 NYLON SLINGS Steel Chokers also available upon request Common types available are listed below. Other unique types and sizes may be available- call the shop to inquire. Selection of slings: 1. Select Type: Endless (EN) or Eyes on each End (EE) 2. Select Length and Width ( Most slings at Staff are 2 width) additional widths available per special request. 2 x 3 long 2 x 10 long 2 x 18 long 2 x 4 long 2 x 12 long 2 x 20 long 2 x 6 long 2 x 14 long 2 x 8 long 2 x 16 long 3. Select Capacity: Note that One ply and Two ply slings are available. Capacity is also dependent on how it is used in lifting. Liftall Slings Rated Capacities in Lbs Vertical Choker V. Basket Part # Eyes each End (EE) One ply (2 width) 3,200 1,250 6,400 EE1-802 Two ply (2 width) 6,400 5,000 12,800 EE2-802 Endless (EN) One ply (2 width) 6,400 5,000 12,800 EN1-802 Two ply (2 width) 12,200 9,800 24,400 EN2-802 Wear Flex Slings Rated Capacities in Lbs Vertical Choker V. Basket Part 90º Eyes each End (EE) One ply (2 width) EE1-0902SE Two ply (2 width) ,400 EE2-0902SE Endless (EN) One ply (2 width) ,400 EN1-0902SE Two ply (2 width) 12,500 10,000 25,000 EN2-0902SE 25

2 26

3 27

SECTION 1 WIRE PULLING - FEEDERS CABLE PULLING LUBRICATION SYSTEM GREENLEE ULTRA GLIDER (UG5) 2 4 (2, 2 ½, 3, 3 ½, 4 ) diameter slip in applicators 2 4 diameter threaded applicators for upward feeds

4 SECTION 1 WIRE PULLING - FEEDERS CABLE PULLING LUBRICATION SYSTEM GREENLEE ULTRA GLIDER (UG5) 2 4 (2, 2 ½, 3, 3 ½, 4 ) diameter slip in applicators 2 4 diameter threaded applicators for upward feeds Additional applicators available: ¾, 1, 1-1/4, 1-1/2 threaded Additional applicators available: 1-1/2, 5, 6 slip-in Three pump speeds to match pulling speed 10 foot hose- 20 ft hose optional / BENEFITS More efficient pull coats wire evenly Reduce amount of lube by 20% Reduce pulling force less likely for a failure in systems, rope break, wire grips pull off Reduce pulling force reduces wear and tear on puller Reduce slip and fall or mess on floor Positions worker further away from pinch point where wire enters conduit. Especially important for vertical feeds from bottom Works well in limited space areas can apply lube at elevations on scissors lift. Great for lubing underground PVC. COST JUSTIFICATION Labor savings For some applications, 1 person can lube and feed wire into conduit instead of two people. Estimated labor savings of $90 per pull. Saves on lube used and wear on puller equipment Pays for itself after 30 pulls 28

MAXIS SAFETY TRIGGERS (TR01) SECTION 1 WIRE PULLING - FEEDERS Foot switches (Dead man switch) for both cable puller and feeder operation Master switch plugs into cable puller Remote switch at feeder

Will communicate up to 1,500 ft between walls and 1.

5 MAXIS SAFETY TRIGGERS (TR01) SECTION 1 WIRE PULLING - FEEDERS Foot switches (Dead man switch) for both cable puller and feeder operation Master switch plugs into cable puller Remote switch at feeder uses RF technology to communicate with master switch Both foot switches must be energized for the puller to operate. Any time either foot pedal is released, the puller stops. Will communicate up to 1,500 ft between walls and 1.5 miles line of sight Equipped with digital meter indicating pounds of force during pull Works with Greenlee wire puller / BENEFITS Reduce / eliminate radio miscommunication. Particularly useful in areas with poor radio reception Person feeding wire can also stop pull to reduce hazards of hands caught in wire or pipe Reduce risk of wire feeding mishaps that can damage cable Contact the Safety Director for this specialty safety device. 29

SECTION 2 WIRE CARTS BRANCH CIRCUITS GREENLEE WIRE DISPENSER #910 Base has 2 fixed and 2 swivel locking heavy duty casters.

Fits through a 36" (915 mm) opening. Capacity: 10 spools up to 18 in diameter. Weight: 213 lbs GREENLEE WIRE CART #911 Large capacity, excellent for storing, transporting or feeding wire.

Rugged 8" wheels. Built-in wire guide for horizontal dispensing. Will pass through a 28" (711.2 mm) opening. Capacity: Six 2,500 spools up to 16 Dia. Fifteen 500 spolls up to 8 Dia.

6 SECTION 2 WIRE CARTS BRANCH CIRCUITS GREENLEE WIRE DISPENSER #910 Base has 2 fixed and 2 swivel locking heavy duty casters. The spool rack consists of 10 spindles and an adjustable guide loop, and can be turned 360 independent of the base. Spindles are angled to contain reels and act as a brake while paying out wire. Fits through a 36" (915 mm) opening. Capacity: 10 spools up to 18 in diameter. Weight: 213 lbs GREENLEE WIRE CART #911 Large capacity, excellent for storing, transporting or feeding wire. Save space, use and store vertically or horizontally. 5 strong reel axles with spring clip retainers plus 2 positions for axle storage allows you to configure for large reels with no loose parts. Rugged 8" wheels. Built-in wire guide for horizontal dispensing. Will pass through a 28" (711.2 mm) opening. Capacity: Six 2,500 spools up to 16 Dia. Fifteen 500 spolls up to 8 Dia. Weight: 62 lbs GREENLEE 10-REEL CADDY #9516 Holds up to ten 2,500' (767 m) spools of 10 gauge wire. Folds down for easy storage. 2 fixed and 2 locking swivel casters for easy portability. Pinless design eliminates loose parts. Maximum Spool Diameter: 15 Maximum Spool Width: Weight: 98 lbs 30

SECTION 2 WIRE CARTS BRANCH CIRCUITS GREENLEE CABLE REEL TRANSPORTER #916 Handle folds to save space when

Size: 63 long x 297/8 wide x 26 ¾ High Capacity: Reels of cable or BX up to 20 W and 40 in dia.

#37202 Dispense one coil of armored cable, flexible conduit, Greenfield or NM-B cable Without twists or

Transport up to 3 coils Capacity: one 250 coil of 14/2, 14/3, 12/2, 12/3 armored cable or romex.

screw, slide reels on spindle, insert spindle in second support frame, tighten thumb screw and you re ready

7 SECTION 2 WIRE CARTS BRANCH CIRCUITS GREENLEE CABLE REEL TRANSPORTER #916 Handle folds to save space when using as a dispenser. Size: 63 long x 297/8 wide x 26 ¾ High Capacity: Reels of cable or BX up to 20 W and 40 in dia. Maximum Total Reel Weight: 300 lbs Weight : 110 lbs GREENLEE BX-ARMORED COILED CABLE DISPENSER & TRANSPORTER #37202 Dispense one coil of armored cable, flexible conduit, Greenfield or NM-B cable Without twists or tangles Base with adjustable tension control rotates to dispense cable Large pulling eye rotates freely Transport up to 3 coils Capacity: one 250 coil of 14/2, 14/3, 12/2, 12/3 armored cable or romex. Weight: 45 lbs GREENLEE WIRE REEL SUPPORT FRAME #914 Insert spindle in one 914 support frame, tighten locking screw, slide reels on spindle, insert spindle in second support frame, tighten thumb screw and you re ready to go. Capacity: 1 rigid conduit for spindle holds 500 to 2500 spools up to 18 in diameter. GREENLEE AND CADDY #9502 Holds four 500 spools of #10 AWG Holds eight 500 spools of #12 AWG Maximum Spool Diameter: 9 Maximum Spool Width:

SECTION 3 BENDING PIPE GREENLEE TABLE BENDER 881 2 ½ - 4 EMT, IMC and Rigid Bends a 90º elbow in 4 rigid in 95 seconds Fast and easy setup.

adjusts table to horizontal and vertical positions Allows multiple bends put close together on same length of pipe MINI EEGOR BENDER 1-2 EMT, IMC

8 SECTION 3 BENDING PIPE GREENLEE TABLE BENDER ½ - 4 EMT, IMC and Rigid Bends a 90º elbow in 4 rigid in 95 seconds Fast and easy setup. Works great for large projects DIS Need plenty of floor space EEGOR BENDER WITH TABLE Bends 2 ½ to 4 EMT, IMC and Rigid Hydraulic pivot jack adjusts table to horizontal and vertical positions Allows multiple bends put close together on same length of pipe MINI EEGOR BENDER 1-2 EMT, IMC and Rigid Mobility- great for small projects HYDRAULIC TW BENDER- HAND PUMP Use for EMT only Mobility- great for small projects No Electrical power needed 32

SECTION 3 BENDING PIPE ENERPAC GB CYCLONE BENDER B2000 ½

same degree Horizontal and vertical positions allow unit

GREENLEE 555 & & 853 & 855 ½ - 2 EMT, IMC and Rigid

rigid conduit bender Bends one shot 90ºs The 885 bends 5.

Rigid Bypass ratchet for fast direct bending on smaller

9 SECTION 3 BENDING PIPE ENERPAC GB CYCLONE BENDER B2000 ½ - 2 EMT, IMC and Rigid Ability to make repeated bends at same degree Horizontal and vertical positions allow unit to create accurate offset bends Mobility- 4 wheels GREENLEE 555 & & 853 & 855 ½ - 2 EMT, IMC and Rigid Excellent mobility GREENLEE ONE SHOT 884 & ¼ -4 rigid conduit bender Bends one shot 90ºs The 885 bends 5. GREENLEE RACHET BENDER 1818 ¾ 2 EMT, ½ 1¼, IMC ½ -1½ Rigid Bypass ratchet for fast direct bending on smaller sizes Easy to move Good for projects when power is not available 33

SECTION 4 THREADING PIPE AND VISES RIGID THREADING MACHINE #1224, 1215 (Tabletop) Threads ¼ -2 pipe at 36 RPM and 2 ½ 4

4-6 with 161 geared threaders ½ HP Foot switch and stand Speed of cutting DIS Not portable RIGID 600 & TOLEDO PORTA-PONY

10 SECTION 4 THREADING PIPE AND VISES RIGID THREADING MACHINE #1224, 1215 (Tabletop) Threads ¼ -2 pipe at 36 RPM and 2 ½ 4 at 12 RPM Threads a wide range of pipe including black, galvanized and PVC pipe, together with stainless steel, IMC and heavy wall conduit. Great for large projects Portable DIS Difficult to thread on bent piece of pipe RIGID #300 ½ 2 Pipe, 2 ¼ - 4 with 141 and 4-6 with 161 geared threaders ½ HP Foot switch and stand Speed of cutting DIS Not portable RIGID 600 & TOLEDO PORTA-PONY THREADING MACHINE ¼ 1¼ Pipe. 32 RPM at no load Hand held and portable RIGID STOCK & DIE Pipe. Also 5-6 available Threaded hub Use portapony drive when have a bend DON T FORGET TO ORDER THE OLIER (#318) AND CUTTING OIL 34

11 THREE LEGGED VISE Chain and clamp styles PIPE SUPPORT/STAND WORKBENCH WITH 5 OR 6 VISE 35

SECTION 5 CUTTING PIPE FLOOR BAND SAW Great for big projects

0Ah Ni-MH battery- fully charged in 45 minutes 1/8 to 113/16 cut

replacement DIS Noisy tool Limitations with larger pipe and

5 Use 18V NiCd battery Works for larger pipe and unistrut PORTA

(6225) and deep cut (6230) options for Milwaukee Electric models

12 SECTION 5 CUTTING PIPE FLOOR BAND SAW Great for big projects CIRCULAR SAW (BATTERY) PANASONIC EY3530, EY Volt with 3.0Ah Ni-MH battery- fully charged in 45 minutes 1/8 to 113/16 cut depth Electric brake and shaft lock adjustment for blade replacement DIS Noisy tool Limitations with larger pipe and unistrut PORTA BAND (BATTERY) Stout STX-250 Cuts up to 2.5 Use 18V NiCd battery Works for larger pipe and unistrut PORTA BAND- (ELECTRIC) Milwaukee Electric & Porter Cable Normal cut (6225) and deep cut (6230) options for Milwaukee Electric models RIGID RATCHET REAMER ½ 2 Self Feeding spiral design for extra fast and easy hand reaming 36

SECTION 6 INSTALLING & FASTENING PIPE HILTI GAS OPERATED FASTENING TOOL -GX 120 Drives 750 fasteners with single can of gas Magazine holds 40 fasteners LED gas gauge

with this tool DIS Can t get to hard to reach areas HILTI POWDERED ACTUATED DX350, DX351, DX451, DX460 Fastens up to 700 nails per hour- increased productivity Easy drop

Requires certification FASTENAL SETTING TOOL Tool for setting concrete anchors with a hammer drill instead of by hand with a hammer.

13 SECTION 6 INSTALLING & FASTENING PIPE HILTI GAS OPERATED FASTENING TOOL -GX 120 Drives 750 fasteners with single can of gas Magazine holds 40 fasteners LED gas gauge helps you avoid running out of gas Quieter than powder actuated tool No training certification required Faster, lighter weight, less noisy Use Hilti straps and washers with this tool DIS Can t get to hard to reach areas HILTI POWDERED ACTUATED DX350, DX351, DX451, DX460 Fastens up to 700 nails per hour- increased productivity Easy drop in magazine for one-handed operation Light weight and low recoil Booster power regulator for accurate nail driving Extension Pole tool available for overhead work DIS Requires certification FASTENAL SETTING TOOL Tool for setting concrete anchors with a hammer drill instead of by hand with a hammer. Fastenal Part # : Reduce stress on shoulder from awkward hammering positions. HAMMERDRILL WITH DUST COLLECTION SYSTEM- For example Hilti TE 5/6 36 Volt rotary drill Uses NiCad battery 3/16 ¾ drilling range 37

DRILL PRESS- Milwaukee #4203 120 Volt, 12.

14 SECTION 6 INSTALLING & FASTENING PIPE PIPE WRENCHES SIZES AVAILABLE: Belt/Strap: assorted lengths- small and large sizes Chain: 16, 18, 36, 48 Straight Pipe: 14, 18, 24, 36, 48 DRILL PRESSES MAGNETIC DRILL PRESS- Milwaukee # Volt, 12.5 amp max 11 inch drill travel Adjustable base Weight 49 lbs Drill stands also available- mount a portable hand drill. Floor stand drill presses also available 38

½ H Weight: 113 lbs LARGE YOKE PIPE CART

15 SECTION 7 PIPE STORAGE GREENLEE CONDUIT AND PIPE STORAGE RACK # 668 Seven individual bins for storage Capacity: 1000 lbs Dimensions: 58 ½ L x 34 W x 63 ½ H Weight: 113 lbs LARGE YOKE PIPE CART FOR MASTER BUNDLES FOUR POSTED CARTS AVAILABLE 39

SECTION 8 TERMINATING FEEDERS GREENLEE CABLE CUTTER- BATTERY ESC8511 Corded Models available too.

to start cut Blades open automatically when a cut is complete Cutting head rotates 360º for making cuts in tight locations Side

enhances operator control Faster than ratchet cutters Great for tight areas i.e. not enough room for large scissors type cable cutter

16 SECTION 8 TERMINATING FEEDERS GREENLEE CABLE CUTTER- BATTERY ESC8511 Corded Models available too. Capacity- 3 3/8 diameter Cu and AL cables Battery- 12V- 1 hr charge time Also 120V available Two speed pump advances the ram quickly to start cut Blades open automatically when a cut is complete Cutting head rotates 360º for making cuts in tight locations Side handles enhances operator control Faster than ratchet cutters Great for tight areas i.e. not enough room for large scissors type cable cutter IDEAL CABLE CUTTER # Use with battery drill 12V minimum Cuts up to 750 MCM Works with the drill you already have 2 HAND RATCHETT CABLE CUTTER #774 and #45206 Model 774( 19 handles) Use up to 500MCM frequently Max use 750 MCM Model 773 (15 handles) Use up to 350 MM frequently Max use 500 MCM 40

SECTION 8 TERMINATING FEEDERS GREENLEE HYDRAULIC CABLE BENDER

cable Compact design bends in tight places Unit with foot pump

BENDER #796 Up through 500 MCM 10 ratchet extension available

drive 1,056 in-lbs torque 14.4 volt Weight- 2.

material 12 Ton CRIMPER Greenlee CK124011 120V Corded or

rotates 360º Ram automatically retracts when crimp cycle is

17 SECTION 8 TERMINATING FEEDERS GREENLEE HYDRAULIC CABLE BENDER #800 One shot bends up to 90º MCM Automatically unloads cable Compact design bends in tight places Unit with foot pump keeps both hands free to hold cable GREENLEE RATCHETT CABLE BENDER #796 Up through 500 MCM 10 ratchet extension available IMPACT WRENCH ( Milw Electric 9082 or Makita 6909D) 3/8 Sq. drive 1,056 in-lbs torque 14.4 volt Weight- 2.4 lbs Works great when using self tapping screws into heavy material 12 Ton CRIMPER Greenlee CK V Corded or uncorded Two speed pump to reduce cycle time Crimping head rotates 360º Ram automatically retracts when crimp cycle is complete Burndy Battery (18V) Crimper- PAT750 and 750XT 12 tons crimping force Weight 16.5 lbs Charges in 45 minutes 41

SECTION 8 TERMINATING FEEDERS HAND HYDRAULIC CRIMPER

shaped dies Weight: 13 lbs (Y35) and 16 lbs for (Y750)

crimping force Swivel head rotates 180º Capacity #4

18 SECTION 8 TERMINATING FEEDERS HAND HYDRAULIC CRIMPER WITH DIES Burndy Y35 & Y ton crimping force U shaped dies Weight: 13 lbs (Y35) and 16 lbs for (Y750) HAND HYDRAULIC CRIMPER - DIELESS Greenlee ton crimping force Swivel head rotates 180º Capacity #4 1000MCM Weight 16.5 lbs Burndy Y ton crimping force Weight 15 lbs 42

SECTION 9 SPECIALTY LADDERS & SCAFFOLDING LITTLE GIANT ULTRA

uneven surfaces like stairs and curbs Fiberglass FOLDING

6-11 Storage Height 6 7 Aluminum Fiberglass unavailable in this

ALUMINUM SCAFFOLD PLANKS WITH GUARDRAILS Length: 24 Width: 20

19 SECTION 9 SPECIALTY LADDERS & SCAFFOLDING LITTLE GIANT ULTRA STEP STEPLADDER Adjustable legs Rated 300 lbs Can be used on uneven surfaces like stairs and curbs Fiberglass FOLDING STEPLADDER (#MT26) Extension Height: Stepladder Height 6-11 Storage Height 6 7 Aluminum Fiberglass unavailable in this size DANGER Do not use for energized work! ALUMINUM SCAFFOLD PLANKS WITH GUARDRAILS Length: 24 Width: 20 Depth: 6 Rated 500 lbs 2 person ALUMINUM EXTENSION PLANK Rated 250 lbs 1 person Opens 8 13 length Width: 14 43

SECTION 9 SPECIALTY LADDERS & SCAFFOLDING BAKER (ROLLING) SCAFFOLDING One Section High Platform Height: 6 ft Overall Height (w/guardrails): 9 6 Width: 30 Two Sections High Platform

20 SECTION 9 SPECIALTY LADDERS & SCAFFOLDING BAKER (ROLLING) SCAFFOLDING One Section High Platform Height: 6 ft Overall Height (w/guardrails): 9 6 Width: 30 Two Sections High Platform Height: 11 6 Overall Height (w/guardrails): 15 Width: 66 (includes outriggers) Order scaffolding through the shop. Bird Ladder is the preferred vendor for your scaffolding needs. 44

21 45

22 46

SECTION 10 MOVING HEAVY EQUIPMENT SWITCHGEAR & TRANSFORMERS Genie Tinners Lift Genie Superlift

working ht 1000 lbs at 18 load center 1000 lbs at 24 load center 1000 lbs at 32 load center Rol A

lbs Width: 24 inches Lifting height: 6 inches Wheel Dia: 6 inches Machinery Rollers Rollers

at 1,500 lbs Machinery Jacks Jacks available from Milwaukee & Madison shops - Tool # 246001-246012

23 SECTION 10 MOVING HEAVY EQUIPMENT SWITCHGEAR & TRANSFORMERS Genie Tinners Lift Genie Superlift Model SL1 650 lbs at 18 ft 500 lbs at 24 ft Genie Superlift Advantage Model SLA foot maximum working ht 1000 lbs at 18 load center 1000 lbs at 24 load center 1000 lbs at 32 load center Rol A Lifts Model # M10 Four lifts available from Milwaukee shop- Tool # Capacity: 6000 lbs Width: 24 inches Lifting height: 6 inches Wheel Dia: 6 inches Machinery Rollers Rollers available from Milwaukee & Madison shops - Tool # Capacity: Various sizes starting at 1,500 lbs Machinery Jacks Jacks available from Milwaukee & Madison shops - Tool # Capacity: 5 ton with 10 inch lift Capacity: 10 ton with 13 inch lift Johnson Bar Pinch Bars beveled crowbar 47

24 SECTION 11 MANUFACTURER S REPRESENTATIVES BIRD LADDER Heinz Kahmann heinz_birdladder@earthlink.net GREENLEE Brent Henke bhenke@greenlee.textron.com HILTI Bill O Sullivan bill.osullivan@hilti.com ELECTROTECH (Wire stripping tools) Tom Banghart Cell tom.banghart@electrotech-inc.com AERIAL LIFTS AERIAL WORK PLATFORMS (AWP) Russ Wittig MILWAUKEE HIGH LIFT Jim Juneau jim_juneau@yahoo.com NES Rentals Jeff Murawski jmurawski@nesrentals.com United Rentals unitedrentals.com Adam Forstner CONTACT DAVE MUELLER FOR ALL EQUIPMENT RENTAL NEEDS. 48

Specialty Tools & Ergonomic Equipment Catalog

Specialty Tools & Ergonomic Equipment Catalog Staff Electric Co., Inc. November 2009 Volume 1, Issue 1 Table of Contents Task Page WIRE PULLING FEEDERS Section 1 3 Through 29 Equipment Checklist Wire Pullers