Safety... Sometimes it can t be dependent on reflectivity alone. ATSSA s Proud Recipient

Transcription

1 Safety... Sometimes it can t be dependent on reflectivity alone. ATSSA s Proud Recipient

2 The Problem Traffic Control professionals have long recognized that certain sign situations are more critically important than others. Some signs simply cannot be ignored. There has been a growing need in the industry for a simple and affordable way to retrofit existing signs with additional levels of warning for those situations that demand them and to do this in such a way that the additional alert system can be motion activated to conserve power and extend the life of the LEDs. A field retrofit Sign Enhancement system that is simple, affordable,and designed for hassle-free installation. The Solution - SignAlert LED Enhancement System LED Rings field retrofits onto almost any existing sign Very affordable 255 Levels - Auto-Dimming at night Solar or AC power options Motion activation and data collection options High Intensity LEDs visible day or night (visible up to 2 miles at night). Hassle-free installation. (No dirt moved means less permits, and streamlined implementation) LED Flashers face mount on existing signs with permanent bonding tape and/or mechanical fasteners. (5) Year COMPLETE SYSTEM Warranty Create a Visible STOP Sign Easy retrofit onto new or existing STOP Signs. Minimal wire management Fits: 24, 30, 36 & 48 STOP Signs Almost any existing sign can be field retrofitted with a SignAlert Enhancement System. Solar or AC power is available. LED Flasher Ring E Seltice Way Post Falls, Idaho sales@trafficalm.com

3 Available Controller Options Create a Visible School Zone Basic System Selectable Outputs Unison Single Alternating Selectable Flash Patterns Standard Flash Rapid Multi-Flash Bright Pop Flash System Consists of 3 basic components: Pulse Flash Potted and Sealed Battery / Controller Face Mounted Flashers 20W Solar Panel 5 Year Warranty AC or Solar power options Emergency Flash Advanced System Radar Detected Approach to activate Flash Sequence. Optional Radar Required. Flashing will remain ON based on a pre-programmed time limit System consists of 3 basic components: Face Mounted Flashers 20W Solar Panel Potted and Sealed Battery / Controller Quick installation to minimize worker exposure Selectable Outputs Unison Single Alternating Selectable Flash Patterns Standard Flash Rapid Multi-Flash Bright Pop Flash AC or Solar power options 5 Year Warranty Pulse Flash FLASHING Emergency Flash Advanced System - Available Options Mesh-Net Communications Fire Station Fob Activate TC Connect provides the user a direct connect for all enabled browser devices ISO 9001 TraffiCalm Systems 5676 E. Seltice Way, Post Falls, ID sales@trafficalm.com Copyright TraffiCalm Systems, 2015 All Rights Reserved Product descriptions and specifications are subject to change without notice

4 Push 2 Cross TraffiCalm s Alternative to RRFB s SignAlert now provides for Push Button Activation! Pedestrians have piece of mind with a safer crossing through the simple push of a button. And Drivers? It s Quite Clear! Push 2 Cross is perfect for Safe Routes to School, Complete Streets or for Mid-Block Pedestrian Crossing applications. SignAlert and Push 2 Cross utilize TC Connect WiFi, a WiFi connection platform developed by TraffiCalm that requires NO Internet Connection! With any browser enabled device, the user can select from multiple options and settings including Flash Frequency, Flash Patterns, LED Brightness and Flashing Durations. Each LED-enabled Pedestrian Crossing Sign that is within a 1000 line of site from each other, can be configured as a single network. This completed network will allow for triggering of multiple sign LEDs by a single Push to Cross activation via our standard, on-board Mesh-Net Radio. Multiple Push Buttons may be used for one configured network. Build YOUR Push 2 Cross Network 20W Solar Kit / 10Ah Lithium Battery or AC Power Supply BDSP-014 BullDog III Push Button PBF9X12-X 9 x12 Push Button Frame 9X12 Push Button To Turn On Warning Lights Sign 30 or 36 LED Flasher Ring for Warning and Pentagon Signs 24 x12 W16-7 (L-R) ARROW Sign 30 or 36 W11-2 Ped Crossing Sign (Yellow or FLYG) 30 or 36 S1-1 School Crossing Sign FLYG MUTCD Compliant * Post/s not Provided NOTE: Illustration depicts an optional back-to-back sign installation (855) TraffiCalm.com Sales@trafficalm.com

5 BDSP-014 BullDog III - ADA Compliant Push Button and Frame Weight with Battery Detection/Activation Unit - SOLAR Power Requirements Voltage Charger Communications Battery Reserve Isolation Required Panel Supplied Outputs 12 lbs. 11VDC to 15VDC (VBATT) MPPT solar charger 14.6VDC, 30W temperature protected Wireless Meshnet integration (device 2 device, +1,000ft range, repeatable signal, 4 channels available, configurable network ID, AES-128 Encryption security, DSSS transmissions on selectable channels) 28 standard load (standard load = 25% activations per day with a single flasher ring) with no sunlight 2 hours of good sunlight each standard load 20W, 17.2V MPPV, 21.6V open circuit Ring 15W Max. Enclosure Rating NEMA 4 Pole mount adapter Flush Mounted LED Flasher Rings Size 30 or 36 (square or pentagon) X.625 LEDs Power Flash Patterns Dimming Components Battery Outdoor rated Tape and provisions for optional self drilling / tapping screws. Amber (590nM): 30 degree cone of view; Rated 100,000 hours; 2.4K CDA/ M^2, Auto Dimming Employed 10V to 18V System Operating Temperature Range 0W standby or OFF (No power required) flashes per minute; 50% Duty Cycle. Additional alternative flash patterns available and are user programmable 255 levels as determined by solar panel illumination -40 C to +74 C -40 C to +50 C TraffiCalm product descriptions and specifications are subject to change without notice. All Rights Reserved

6 Sequential Chevrons Sequential Chevron - Radar Our Sequential Chevron System is designed to give drivers a higher level of visual guidance when approaching curves. TraffiCalm s Sequential Chevrons are ideal for use on todays highways that have the potential for accidental vehicle lane departures. The sign itself has a high visibility display that outlines the Chevron legend with between 30 and 36 Hi Intensity Amber LEDs. Multiple Chevrons in a single location are configured as a single network and flash sequentially in the direction of traffic. This network can either be triggered to flash by our Radar Detectable Advance System or flash 24/7 by our Basic System Available Options Sequential with Radar Sequential NO Radar Non-Sequential - 24/7 TC Connect WiFi provides: Multiple Flash Patterns Speed Triggered Flash Patterns Dimming Control Connectivity with all Browser Enabled Devices Connectivity to ALL Sequential or Non-Sequential Chevrons Connectivity without the need for an Internet Connection 25 MUTCD Compliant 25

7 Weight with Battery Detection/Activation Unit - SOLAR Power Requirements Voltage Charger Communications Battery Reserve Isolation Required Panel Supplied Outputs 12 lbs. 11VDC to 15VDC (VBATT) MPPT solar charger 14.6VDC, 30W temperature protected Wireless Meshnet integration (device 2 device, +1,000ft range, repeatable signal, 4 channels available, configurable network ID, AES-128 Encryption security, DSSS transmissions on selectable channels) 28 standard load (standard load = 25% activations per day with a single flasher ring) with no sunlight 2 hours of good sunlight each standard load 20W, 17.2V MPPV, 21.6V open circuit Ring 15W Max. Enclosure Rating NEMA 4 Size LEDs Power Flash Patterns Dimming Components Battery Pole mount adapter Flush Mounted LED Flasher Rings Various X.625 ; Shape of Led Ring determined by SHSM Sign Details for 18x24 and 24x30 W1-8 Chevron Signs Outdoor rated Tape and provisions for optional self drilling / tapping screws. Amber (590nM): 30 degree cone of view; Rated 100,000 hours; 2.4K CDA/ M^2, Auto Dimming Employed 10V to 18V System Operating Temperature Range 0W standby or OFF (No power required) flashes per minute; 50% Duty Cycle. Additional alternative flash patterns available and are user programmable 255 levels as determined by solar panel illumination -40 C to +74 C -40 C to +50 C TraffiCalm product descriptions and specifications are subject to change without notice. All Rights Reserved

8 SignAlert TM - Enhancement System -- Basic System Specifications Detection/Activation Unit - SOLAR POWER Weight with Battery 12 lbs. Power Requirements Voltage 11VDC to 15VDC (VBATT) Charger MPPT solar charger 14.6VDC, 30W temperature protected Battery LiFePO4 10Ah standard. Autonomy Infinite with 20W panel exposed to low light conditions Panel Supplied 20W, 17.2V MPPV, 21.6V open circuit Outputs Ring 15W Max. Pole mount adapter Flush Mounted LED Flasher Rings Size Various X.625 available Outdoor rated Tape and provisions for optional self drilling / tapping screws. LEDs Red (626nM); 30 degree cone of view; Rated 100,000 hours; 20K CDA/ M^2, Auto Dimming Employed Amber (590nM): 30 degree cone of view; Rated 100,000 hours; 20K CDA/ M^2, Auto Dimming Employed White (Cool White): 30 degree cone of view; Rated 100,000 hours; 25K CDA/ M^2, Auto Dimming Employed Blue (470nM): 30 degree cone of view; Rated 100,000 hours; 9K CDA/ M^2, Auto Dimming Employed Power 10V to 18V 0W standby or OFF (No power required) Flash Patterns flashes per minute; 50% Duty Cycle. Additional alternative flash patterns available and are user programmable Dimming 255 levels as determined by solar panel illumination System Operating Temperature Range System -40 C to +74 C Advanced System - Specifications Detection/Activation Unit - SOLAR POWER Weight with Battery 13 lbs. with 20Ah Battery Power Requirements Voltage 11VDC to 15VDC (VBATT), 240mW in Standby (scanning), 1.8W avg in activated mode (varies by flasher model) Charger MPPT solar charger 14.6 VDC, 30W temperature protected Battery LiFeP04 10Ah Standard Autonomy Infinite with 20W panel exposed to low light conditions Panel Supplied 20W, 17.2V MPPV, 21.6V open circuit standard. Optional 60W panels available. Enclosure Rating NEMA 4 Face Mounted LED Flasher Rings Size Various X.625 available LEDs Reference Basic 24-7 System Specifications above. Power 10V to 18V Flash Patterns flashes per minute; 50% Duty Cycle. Additional alternative flash patterns available and are user programmable Dimming 255 levels as determined by solar panel illumination System Operating Temperature Range System -40 Degree C to 74 degree C TraffiCalm product descriptions and specifications are subject to change without notice. All Rights Reserved Distributed by: