Perhaps the most successful product Litelab has introduced in the last 20 years, BusRun has been adopted worldwide thanks to the following features:
|
|
- Lynne Knight
- 6 years ago
- Views:
Transcription
1
2 Perhaps the most successful product Litelab has introduced in the last 20 years, BusRun has been adopted worldwide thanks to the following features: Electrical code variants for bus combined with its far greater current capacity greatly reduce installation cost with no compromise on your design. BusRun s structural integrity allows for unique features when suspended or recessed. Litelab innovations have allowed BusRun to do double duty, including HVAC integration, supporting hanging obects, or becoming part of a ceiling structure allowing the designer much greater flexibility at much lower cost. The next time you have a need for a linear power source let Litelab s application engineers assist in allowing your design to reach its full potential take the Bus and leave the driving to us. North Carolina Museum of Art Raleigh, NC Photo: Scott Frances Architect: Thomas Phifer and Partners Lighting Design: Fisher Marantz Stone Front/Back Cover: Philadelphia Museum of Art Perelman Building Philadelphia, PA Photo: Kevin Opp Architect: Gluckman Mayner Architects Lighting Design: George Sexton and Associates 2 BUSRUN BUSWAY LITELAB.COM 3
3 Contents Features and Benefits 06 Hanging 09 Surface 13 Recessed 17 BusRun Design Ideas 20 Extrusion Profile Details 30 Support Details 31 Illustrated Feed Guide 32 BusRun Current Limiter 33 BusRun Accessories 34 4 BUSRUN BUSWAY Salvador Dali Museum St. Petersburg, FL Photo: Moris Moreno Architect: HOK Lighting Design: George Sexton Associates LITELAB.COM 5
4 FEATURES + BENEFITS BusRun requires fewer feeds resulting in fewer home runs and lower installation cost. Supports up to 100lbs [45kg] static load between hanging points. BusRun with integral Unistrut compatible channel for supporting heavier obects. Designed and engineered to power loads from 1.0 amp to 60 amps. Can be miter cut for special shapes or specified with welded L, T or X connectors for grids or custom configurations. Architectural grade bus system for hanging, surface and recessed applications. Installed worldwide. Available for 12, 100, 120, 240 or 277 volts. SignHangers TM plug into BusRun and support up to 40lb [18kg] static load. Control energy consumption and ensure compliance with load requirements with optional built-in current limiters. Fitters recess completely into the BusRun providing a clean ceiling plane. PowerDown TM boxes provide power to other electrical devices. Support and provide power to fixtures from other manufacturers. Can be specified in 1 to 4 circuit configurations. 6 BUSRUN BUSWAY LITELAB.COM 7
5 Hanging Because BusRun Busway is structurally selfsupporting,there s no need for extra stabilizing elements BusRun can hang independently from mounting points up to 10 feet apart. Not so with structurally flimsy track. Track requires more frequently spaced pendants and often long runs are mounted to a sturdier element for support. Couple this with the number of extra costly feeds required for track by electrical codes. With BusRun you have a lighting system that is both clean and beautiful compared to standard track. Georgia Sports Hall of Fame Macon, GA Photo: Shaun Smith Exhibit and Lighting Design: Gallagher and Associates 8 BUSRUN BUSWAY LITELAB.COM 9
6 HANGING F E E D O P T I O N S S U P P O R T O P T I O N S BUS-08H Surface Mount/Suspended 1 circuit/2 circuit 1 neutral Pendant Feed Top Conduit Cable Feed Splice Box Feed Support Pendant Field Cuttable Canopy LevelGlide TM Support Pendant Turnbuckle (rod/bracket by others) Eyebolt for Cable (cable by others) BUS-09H Surface Mount/Suspended 2 circuit 2 neutral BUS-20H Loadmatic Bus/ Surface Mount/Suspended 1 circuit/2 circuit 1 neutral Bus08 Profile Available in 4 [1.2m], 6 [1.8m], 8 [2.4m] and 10 [3.0m] lengths. Sleeve Reinforces the hanging BusRun at connection points. BUS-37H Loadmatic Bus/ Surface Mount/Suspended 2 circuit 2 neutral Joiner Kit Includes copper busbars to maintain the electrical connection and a protective vinyl cover. End Cap Installs at each end of the run. 10 BUSRUN BUSWAY LITELAB.COM 1 1
7 Surface Because of its virtually seamless design, lengths of Surface-Mount BusRun meet neatly end-to-end, with all necessary hardware concealed internally. The long runs allowed for BusRun Busway by electrical codes result in fewer feeds for less clutter and significant savings. BusRun fitters recess completely into the BusRun Busway, rather than hanging below it, to further minimize visual distraction above the connected load. GM Experience Exhibit at NAIA Show Detroit, MI Photo: Shaun Smith Design: HB Stubbs GM Creative Services Lighting Design: Light Source, Inc. 12 BUSRUN BUSWAY LITELAB.COM 1 3
8 SURFACE F E E D O P T I O N S S U P P O R T O P T I O N S In addition to these options, BusRun can also mount to a large variety of drop ceiling extrusions consult the factory to learn more about this application. BUS-08S Surface Mount/Suspended 1 circuit/2 circuit 1 neutral 6 Round Canopy Feed 5 Square Canopy Feed Splice Box Feed Surface Mount Clip Vertical Wall-Mount Bar Horizontal Wall-Mount Bar Bus08 Profile BUS-09S Surface Mount/Suspended 2 circuit 2 neutral Available in 4 [1.2m], 6 [1.8m], 8 [2.4m] and 10 [3.0m] lengths..375 [10] BUS-20S Loadmatic Bus/ Surface Mount/Suspended 1 circuit/2 circuit 1 neutral Joiner Kit BUS-37S Loadmatic Bus/ Surface Mount/Suspended 2 circuit 2 neutral Surface mount clips leave a.375 [10mm] gap between the finished ceiling and top of the BusRun. Includes copper busbars and a grounding bar to maintain the electrical connection and a protective vinyl cover. End Cap Installs at each end of the run. 14 BUSRUN BUSWAY LITELAB.COM 1 5
9 Recessed Recessed BusRun fully integrates with the structural environment and blends seamlessly into the ceiling. Unlike recessed track housings, which install separately from the track, recessed BusRun has integrated flanges. And, because a single feed can power up to 260 feet of BusRun, it s easier to provide fewer feed connections than would be necessary for track. Steuben Glass New York, NY Photo: Shaun Smith Design: Ralph Applebaum Associates 16 BUSRUN BUSWAY Lighting Design: Johnson Schwinghammer Lighting, LLC LITELAB.COM 1 7
10 RECESSED S U P P O R T O P T I O N S Attach BusRun to structure with threaded Bus13 Profile rod or other rigid connectors. BUS11 Flanged loadmatic recessed for panel ceiling systems 1circuit/2 circuit 1 neutral Available in 4 [1.2m], 6 [1.8m], 8 [2.4m] and 10 [3.0m] lengths. Framing Threaded Rod BUS12 Flanged loadmatic recessed for panel ceiling systems 2 circuit 2 neutral By others Framing 5/8 plaster ceiling BUS13 Flangeless recessed for gypsum ceiling systems 1 circuit/2 circuit 1 neutral. Skim coat of durabond Plastic cover (removed after ceiling is painted.) BUS22 Flangeless recessed for gypsum ceiling systems 2 circuit 2 neutral Recessed BusRun is available for both trimless and trimmed applications. (Trimless shown) View from below ceiling. BUS14 Flanged loadmatic recessed for gypsum ceiling systems 1 circuit/2 circuit 1 neutral F E E D O P T I O N S Top End/Center Feed Side End/Center Feed Top/Center Splice Box Trimless BusRun installed in a finished ceiling. Joiner Kit Includes copper busbars and two grounding bars to maintain the electrical connection and a protective vinyl cover. End Cap Installs at each end of the run. 18 BUSRUN BUSWAY LITELAB.COM 1 9
11 DESIGNING WITH BUSRUN Many of our best design solutions are customer inspired. The following pages highlight ust a few of the most popular ideas. We welcome new concepts and will do our best to incorporate your design into this very flexible product. 20 BUSRUN BUSWAY LITELAB.COM 2 1
12 DESIGN IDEAS A snap-in cover plate attaches to the mounting channel - providing a finished appearance for the sprinkler head. Air flows around the BusRun extrusion and through a knockout in the mounting channel and into an HVAC duct (installed by others). Sprinkler Heads.. No Problem! LiteLab specializes in recessed bus systems that multitask, performing as part of an air handling system, providing extra circuits for emergency power, smoke alarms and security systems, and incorporating some of the most advanced technologies, like occupancy sensors and fiber optic communications. We also provide systems with interrupted power and extrusion penetrations for sprinklers, and other requirements. Walker Art Center Minneapolis, MN Architect: Herzog & de Meuron Lighting Design: Arnold Chan Mounting brackets are angled 90 outward of the mounting channel allowing HVAC ducts to attach to the top of the channel. The BusRun system is designed to integrate other building systems, such as sprinkler heads or emergency strobes, allowing for clean linear ceiling lighting. 22 BUSRUN BUSWAY LITELAB.COM 2 3
13 DESIGN IDEAS 2-0 [610mm] typical each side Maximum 10-0 [3048mm] between hang points (Not shown to scale) Maximum 100lb [45kg] static load between hang points 120 ground alignment bars preloaded before corners are welded. BusRun Hanger Kits are preloaded before corners are welded. Top Conduit Feed BusRun Hang it from the Bus... BusRun has the unique weight bearing capacity of accepting a load of up to 100lbs/45kg between hanging points ßimagine the possibilities: monitors, merchandise, works of art the potential is almost endless. BusRun provides flexible solutions to give your proect the added advantage. Bus20 extrusion was designed to accept Unistrut hardware. Miter Cut BusRun Does your installation require unique shapes? BusRun can be cut and welded into a variety of geometries, and is capable of accommodating both horizontal and vertical orientations. Its unique structural strength also lets it be supported in unique ways allowing it to become an integral aspect of your unique architectural aesthetic. National Gallery of Australia Canberra Architect: PTW Architects Lighting Design: George Sexton and Associates 24 BUSRUN BUSWAY LITELAB.COM 2 5
14 DESIGN IDEAS Recessed in Panel Ceilings... Busrun Busway can also function as the main runner of support in most panel ceiling systems. Its unique structural strength will support ceiling loads, and it can tie into most paneled ceiling support grids. Just another feature that allows BusRun to multitask for you. Recessed in Wood Ceilings... Busrun Busway provides many unique mounting techniques that allow it to be incorporated into wood ceiling systems for a aesthetically pleasing solution. Consult our application engineers. 26 BUSRUN BUSWAY LITELAB.COM 2 7
15 DESIGN IDEAS Primary circuits are daisy-chained and wired independently of the emergency circuits. Emergency circuits (highlighted in yellow) can be integrated within runs of BusRun and daisy-chained reducing the numbers of feeds required. Integrated Emergency Circuits... It is no longer necessary for egress systems to be unsightly. With BusRun, emergency circuits can be incorporated directly into the busway system with matching fixtures and tamper resistant fitters. All connections can be made within the BusRun extrusion and covered with a splice plate. This eliminates the need for a separate unction box or long built-in wire whips. Toledo Art Museum Toledo, OH Architect: Kazuyo Seima + Ryue Nishizawa/SANAA Lighting Design: ARUP 28 BUSRUN BUSWAY LITELAB.COM 2 9
16 EXTRUSION PROFILE DETAILS SUPPORT DETAILS Bus 08* HANGING/SURFACE Bus 09** HANGING/SURFACE Bus 20* HANGING/SURFACE LevelGlide TM gripper cable with closed eyeloop Canopy LevelGlide TM gripper, cable, and canopy Turnbuckle for threaded rod Eyebolt for cable Support Pendant HOT 2.38 [61] 2.38 [61] 2.44 [61] NEUTRAL 1.06 [27] 2.06 [53] 1.63 [41] Bus 37** HANGING/SURFACE 2.44 [61] Bus 11* RECESSED 2.38 [61] Bus 12* RECESSED 2.38 [61] Cable with thimbled, crimped loop at the top, self-locking gripper and mounting bar at the bottom, provide instant and precise height adustability. B-HCO [1525] B-HCO [3050] B-HCO [4525] Cable with swivel coupler at the top, self-locking gripper and mounting bar at the bottom, provide instant and precise height adustability. 5 diameter canopy mounts to ceiling. B-HCO-060-C 5 [1525] B-HCO-120-C 10 [3050] B-HCO-180-C 15 [4525] Steel counter-rotating barrelnut and mounting bar enable attachment and leveling of BusRun fastened to threaded rod (by others). B-HHO-TR250 for 1/4-20rod B-HHO-TR375 for 3/8-16rod Steel adaptor for cable (with eyebolt) B-HHO-CK canopy, stem and hex nut. Mounting bar supplied. Provides 18 height between bottom of Bus and ceiling. B-HPOD [457] Bus 13** 3.16 [80] RECESSED Bus 22* 3.13 [79] RECESSED Bus 14** 4.63 [117] RECESSED Field Adustable Support Pendant Surface Mount Clip Wall Mount Bar Offset Wall Mount Bar.38 [10] 2.38 [61] 2.38 [61] 2.38 [61] (Front View) BusRun Options: 3.56 [90] 4.56 [116] 3.5 [89] To properly specify BusRun, decisions need to be made in regards to circuiting, support, voltage, amperage and finish. For additional information refer to our website, or call *Circuit Options: l 1-circuit (shown) l 2-circuit **Circuit Options: l 2-circuit (shown) l 4-circuit Support Options: refer to support details Voltage Options: l 120 volt l 12 volt l 277 volt l 240 volt Amperage Options: l 16 amp l 20 amp l 30 amp l 60 amp Finish Options: l White l Black l Brushed Aluminum l Custom Paint 5.75 canopy, stem and hex nut. Mounting bar supplied. Stem is field cuttable and secured with set screw at canopy. B-HPO-24-FC 24 [600] B-HPO-48-FC 48 [1200] Stainless steel-spring clip with mounting hole and washer to protect finished ceiling as clip is rotated into BusRun mounting channel. (Included) B-HS3 (dozen) Aluminum bracket attaches to BusRun top channel. Maximum spacing 3-0 [915]. Ordered separately [70] 1 channel [90] 2 channel Aluminum bracket attaches to BusRun top channel. Maximum spacing 3-0 [915]. Ordered separately [70] wall-mount, 1 channel, surface [90] wall-mount, 2 channel, surface on page 31. C 30 BUSRUN BUSWAY LITELAB.COM 3 1
17 ILLUSTRATED FEED GUIDE BUSRUN CURRENT LIMITER Hanging: Feed Options Surface: Feed Options Recessed: Feed Options PEF PENDANT END FEED TEB TOP END FEED SPLICE BOX STYLE CEF 6.75 ROUND CANOPY END FEED EEF END/END FEED WHIP STYLE TEF TOP END FEED WHIP STYLE l PCF PENDANT CENTER FEED TCB TOP CENTER FEED SPLICE BOX STYLE CCF 6.75 ROUND CANOPY CENTER FEED SEF SIDE/END FEED WHIP STYLE TCF TOP CENTER FEED WHIP STYLE l k TEF** TOP END FEED CABLE STYLE CEF* 5 SQUARE CANOPY END FEED EEB END/END FEED SPLICE BOX STYLE SEF SIDE END FEED WHIP STYLE l TCF** TOP CENTER FEED CABLE STYLE CCF* 5 SQUARE CANOPY CENTER FEED SCF SIDE CENTER FEED WHIP STYLE k k k TEF TOP END FEED TOP CONDUIT WHIP STYLE TEB l TOP END FEED SPLICE BOX STYLE TCF TOP CENTER FEED TOP CONDUIT WHIP STYLE BusRun Busway Feeds TCB TOP CENTER FEED SPLICE BOX STYLE BusRun has the unique capability of being powered from 1 amp to 60 amps, and anywhere in between in 12, 120, 240 and 277 volt configurations. Designers can achieve the cleaner aesthetic with factory installed electrical feed wires (whips) or splice box feeds. Other more traditional methods are also available. All feeds are available with a selection of wire entry points to suit any application. l BusRun Current Limiter Designed to help you meet the most stringent energy codes, these units are offered in various stock sizes and can be used in all BusRun extrusions. Custom sizes are available upon request. This unit is designed to give the customer a low cost, visually appealing solution to this ever present issue. TEC- Top End Conduit 2.39 [61] 1.07 [27] EEC- End End Conduit Side View Plan View TEC-08 Top End Current Limiter Housing Extrusion Minimum Length 10 [254] Conduit Coupling Thermal Circuit Breaker* Model # Available Amperage TEC- 1.5A 3.0A 4.0A 8.0A EEC- 1.5A 3.0A 4.0A 8.0A * ETA Series 3130 rating varies from fractional to 14 amps mx. Recognized supplementary protector QVNU2, UL File E NOTES: Max Load: 60 amp at 12V, 120V, 240V, 277V k Max Load: 20 amp at 120V or 16 amp at 240V l Max Load: 30 amp at 120V or 16 amp at 240V *Specify 5 square canopy **Specify cable feed C 32 BUSRUN BUSWAY LITELAB.COM 3 3
18 ACCESSORIES BusRun Bridges Bridges are portable, plug-in cross-pieces for use between permanent BusRun lengths. BusRun SignHanger Can be plugged into BusRun lengths, Struts, Bridges or BusPoints to support up to 40lb [18kg] static, vertical load. signhanger SALE BusRun PowerTaps Field-attached to approved lighting fixture, for power only (support by other device). Fitting at one end of woven stainless steelenclosed cable, leads at opposite end. field-installed factory-installed BusRun BusPoints A flexible alternative to fixed position, canopy-mount fixtures in areas where long busway runs are not needed. Rated at 20 amps (max) two standard lengths accommodate one or two lighting fixtures or other devices with a BusRun fitter. A Double BusPoint is available with 3 conductors for two separate circuits. Supplied with rectangular backbox for connections, BusPoints install fully recessed. BusRun PowerDown Boxes PowerDown Boxes are available with breakers up to 30amps or fuses up to 20amps. Breaker style is provided with knockouts, and fused style is provided with 3-prong Edison receptacle, twist lock receptacle or cable clamp. Loadmatic Hanger Litelab s Loadmatic Hangers allows you to suspend loads of up to 100lbs/45kgs from our loadmatic busway models in a fixed and secure manner. breakered fused 34 BUSRUN BUSWAY
19 251 Elm Street Buffalo, New York This document contains both conceptual renderings and products that are subect to change based on design, engineering, and manufacturing review and analysis.
One Circuit Trac System TRAC SECTION, JOINERS & FEEDS T Series
Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low-Profile, single-circuit trac sections for surface or pendant mounting. I-beam cross section provides added strength and
More informationOne Circuit Trac System TRAC SECTION, JOINERS & FEEDS T Series
Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low-Profile, single-circuit trac sections for surface or pendant mounting. I-beam cross section provides added strength and
More informationTwo Circuit Trac System TRAC SECTION, JOINERS & FEEDS
Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low profile, two-circuit trac sections for surface or pendant mounting. Provides two separate 20-amp circuits from a single
More informationSURFACE TRACK (120/250V) SPECIFICATIONS
SURFACE TRACK (120/250V) SPECIFICATIONS GENERAL Lighting Track shall allow fixtures to be located anywhere along the track length. Fixtures shall be easily focused, switched, dimmed, accessorized and removed
More informationMEDIA LED. Pendant Standard Mount Installation ou de montage WARNING:
MEDIA LED Pendant Standard Mount WARNING: Disconnect main power at the source prior to installation! Thread gripper base onto 1 /4 20 stud, or with #8 screw. Depress gripper nozzle to insert aircraft cable.
More informationLSI 20 Series 30A, 120V Surface Busway Components 1
LSI Busway System LSI 20 Series 30A, 120V Surface Busway Components 1 IBEW union made at LSI plant in USA Specification grade heavy duty.075 (1.8mm) extruded aluminum busway 8 foot (2.4m) and 12 foot (3.7m)
More informationJuno Trac-Master Trac Lighting Systems. Comprehensive line and low voltage track systems
Juno Trac-Master Trac Lighting Systems Comprehensive line and low voltage track systems Juno Trac-Master System Safe and simple installation is what you can expect from Juno one-circuit and two-circuit
More informationRECESSED TRACK (120V) SPECIFICATIONS
RECESSED TRACK (120V) SPECIFICATIONS GENERAL Recessed track shall be approved by the NEC for flush-mounting into ceiling or any flat surface. Recessed Track shall allow fixtures to be easily focused, switched,
More informationINTEGRID TRACK (120V) SPECIFICATIONS
INTEGRID TRACK (120V) SPECIFICATIONS GENERAL Integrid Track shall be a combination Track and main runner for mech - anically supporting suspended ceiling systems. Integrid Track shall allow fixtures to
More informationTwo Circuit Trac System TRAC SECTION, JOINERS & FEEDS
Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Low-Profile, two-circuit trac sections for surface or pendant mounting. Provides two separate 20-amp circuits from a single
More informationINSTALLATION INSTRUCTION W Track Recessed 120V Flangeless
W Track Recessed 120V Flangeless WT4-RTL, WT8-RTL, WT12-RTL SAFETY INSTRUCTION Read all of these instructions before installing the track system. Turn off power at main switch before installing or modifying
More informationTRAC-LITES One Circuit Trac System TRAC SECTIONS & SYSTEM COMPONENTS R Series
Project: Fixture Type: Location: Contact/Phone: PRODUCT DESCRIPTION DIMENSIONS Reduced-profile, single-circuit trac sections for surface or pendant mounting. Compatible with a full range of feed, connector
More informationGEMINI HOUSING SPECIFICATIONS
GEMINI HOUSING SPECIFICATIONS GENERAL Gemini Housing shall support Track of six foot intervals. In addition, the extra compartment shall be able to be used for a multitude of elec trical or mechanical
More informationNT-300 Series Single Circuit Track System & Accessories
NT-300 Series Single Circuit Track System & Accessories Type Project Catalog No. Lamp/Wattage PRODUCT DESCRIPTION Low profile, extruded aluminum track with 20-Amp rated flat, solid integral copper conductors.
More informationJEWELERS COLLECTION LIGHTING INSTRUMENTS
JEWELERS COLLECTION LIGHTING INSTRUMENTS 1 Jewelers Collection Lighting Instruments MACHINED RINGS Elegant in detail and exquisitely finished, the Jewelers Collection of fine lighting instruments is available
More informationMOUNTING SYSTEMS SPECIFICATIONS
MOUNTING SYSTEMS SPECIFICATIONS GENERAL Mounting Systems shall allow Track Systems to be fastened to or from various surfaces in a wide range of safe and approved methods. Mounting Systems shall have a
More informationAlphabet By Ledra Brands
700 Track 700 Track 700 Track is a 1 circuit, 20A rated, line voltage track system. Its lightweight, compact elegant design is easy to install saving on overall project costs. The track is a 120v 1-circuit
More informationPut the Power in Your Hands
Put the Power in Your Hands StarlineTrack Busway... STARLINE Track Busway is quickly becoming the industry standard for power distribution systems. Introduced in 1988, this innovative system is a modular,
More informationPDI PowerWave 2 Bus System
1 GENERAL 1.1 Summary This specification covers the electrical characteristics and general requirements for a continuous opening, low voltage, vertical or horizontal power busway distribution system. System
More informationCOMPACT BUSWAY 40 & 60 AMP HOUSING
40 & 60 AMP HOUSING B40 & HOUSING Each Track Busway housing section consists of an extruded aluminum housing with an insulated strip containing copper conductors mounted on the top interior wall. The aluminum
More information2 CIRCUIT TRACK. Notes: INSTALLATION PROFILE SURFACE TRACK COLOR. Page 1/9. Date :12/06/17 Rev.02 WHITE POWDER COAT SILVER ANODIZED
2 CIRCUIT TRACK SURFACE TRACK COLOR INSTALLATION PROFILE WHITE POWDER COAT SILVER ANODIZED PLASTER FLANGE RECESSED VISIBLE FLANGE RECESSED BLACK ANODIZED Page 1/9 SURFACE TRACK SYSTEM : compose your system
More informationThe lever must be placed at the lower position, when the track head is intended to be use in a one-circuit track system.
1-CIRCUIT TRACK Single circuit Extruded aluminum body Insulated solid 12-gauge copper Rated for maximum of 2400 watts Visual polarity groove Compatible with most 3-wire systems ET2 ET4 ET6 ET8 ET12 2 FT.
More informationLIGHTPLANE 1 RECESSED - LP1R
INSTRUCTIONS LIGHTPLANE 1 RECESSED - LP1R Safety & Warnings! When installing or using this recessed fixture basic safety precautions should be followed: 1. Read ALL INSTRUCTIONS before installing 2. This
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS This document explains mounting for pendant, recessed, and wall PENDANT - STEP ONE INSTALL MOUNTING POINTS Non-power feed mounting points may be positioned 1 to 12 or 12 to 18
More informationConduit and Wire. Wire and Cable Whips. Bus Duct, Cable Trays, Overhead or Under Floor Raceways, Strut or Channel Systems
Conduit and Wire Must be scrapped whenever reconfiguration of the electrical layout is needed. Many runs may be needed for applications with a high volume or high density of electrical loads. It is labor
More informationProduct Selection Guide
Selection Guide Selection Guide TABLE OF CONTENTS T1 Series: 40, 50 & 60 Amps...1.1-1.29 T2 Series: 60, 100 Amps...2.1-2.44 T3 Series: 100 & 225 Amps...3.1-3.37 T5 Series: 250, 400 & 800 Amps...4.1-4.51
More informationSURFACE CONTROLTrack SPECIFICATIONS
CONTROLTrack SURFACE CONTROLTrack SPECIFICATIONS GENERAL CONTROLTrack shall allow fixtures to be located anywhere along the track length. Fixtures shall be easily focused, switched, dimmed, accessorized
More informationTrack Accessories. Single Circuit Track. L Connector T Connector X Connector. Mini Connector Floating Canopy End Feed Kit.
Single Circuit Single Circuit Track Live End Connector Flexible Connector Straight Connector Track supplied with dead end and mounting hardware Live end connector used for direct wiring Flexible connector
More informationlight
light ATLAS light CORE STRENGTH A new standard for an essential fixture. Atlas is a family of high performance ambient fixtures combining sophisticated detailing with intelligent functionality. Available
More informationCatalog # Project. Comments. Prepared by. L653 L =12'Nominal Actual length: 140-1/8" [3559mm] W=1 3/8" [3559mm] H =11/16" [17.5mm]
Miniature size, decorator finishes, push-in connectors, economy, all combine to make single-circuit Miniature Trac perfect for residential or commercial use. Polarized connectors and end caps are molded
More informationChoice of mud-in flange or overlap trims and cover profiles for custom appearances. Two-channel design for multiple zone controls
by Recessed Power Track Housing is a revolutionary all-in-one slot power delivery system. Express your creativity by dynamically repositioning every light fixture to personalize your lighting design. FEATURES
More information168 Georgetown Road Canonsburg, PA USA Phone: Toll Free: Fax:
168 Georgetown Road Canonsburg, PA 15317 USA Phone: 724-597-7800 Toll Free: 800-245-6378 Fax: 724-916-2221 www.uecorp.com info@uecorp.com A DIVISION OF Introduction Plug-In Accessories Application Briefs
More informationJuno Trac-Lites System A complete and customizable track system with an array of features
Juno Trac-Lites System A complete and customizable track system with an array of features Juno Trac-Lites System Track sections are constructed of extruded aluminum and offer a low 1/2" profile that unobtrusively
More informationWhen using electrical equipment, basic safety precautions should always be followed including the following:
INDUSTRIAL INSTALLATION INSTRUCTIONS Illumina BS100LED2FT-PLUS EACH MODEL NUMBER CONSISTS OF THE FOLLOWING: SERIES / LENGTH / OPERATION / LUMENS / COLOUR TEMP. / INPUT SERIES: LENGTH: OPERATION: BS100LED2PLUS
More informationThe Tracking Magnet Recessed High-tech LED lighting system for interior architecture
Description The Tracking Magnet system is creative, flexible, reliable and precise. Accent fixtures can be rapidly exchanged and repositioned without tools using the magic of magnets. A variety of accent
More informationElectrical Applications. Metal Framing & Cable Tray Superstrut Metal Framing System. Column A. Design Data: Materials: Column B
Electrical Raceway Series 800 Surface Raceway and Lighting Systems Superstrut channel together with snap-in closure strip is listed by Underwriters Laboratories as a surface metal raceway. Other accessories
More informationFlexible, Customizable Power Solutions for Mission Critical Success
Flexible, Customizable Power Solutions for Mission Critical Success The most critical decision, for mission critical facilities. By their very nature, mission critical and data center facilities are extremely
More informationINTELLIGENT MEDIUM POWERBAR impb
INTELLIGENT MEDIUM POWERBAR impb INTELLIGENT MEDIUM POWERBAR impb E+I Engineering s Intelligent Medium Powerbar (impb) is a 600 Volt encased track busduct. The range is available in two bar configurations
More informationUV8 & UV90 SERIES INSTALLATION INSTRUCTIONS
UV8 & UV90 SERIES INSTALLATION INSTRUCTIONS Important THIS SHEET CONTAINS IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS. Warning This product must be installed in accordance with National Electrical
More informationPlug-In Raceway - Power
Plug-In Raceway - Power End Caps Vertical Elbow Page PR.1 Power Feeds Wall Clip Horizontal Elbows Plug-In Units Joiner Kit Plug-In Raceway - Power HOUSING SECTION Each Plug-In Raceway housing section consists
More informationProject. Comments. Prepared by. 20-1/8" [511mm] 44-1/8" [1121mm] 92-1/8" [2340mm] 140-1/8" [3559mm]
DESCRIPTION Miniature size, decorator finishes, push-in connectors, economy, all combine to make single-circuit Miniature Trac perfect for residential or commercial use. Polarized connectors and end caps
More informationPROJECTOR ACCESSORIES
PROJECTOR *To order select accessories in white or silver, simply add a W for white or an S for silver to the end of the part number. CEILING PLATES CMA100 8" (203 mm) CEILING PLATE WITH ADJUSTABLE 1-1/2"
More informationA B C D E F. Tools Required (supplied by others)
Page 1 of 17 Parts List Below Deck Automatic Retractable Security Cover Kit (1) Tube End Bearing Plate (A) (1) Rope Reel and Cover Drum Motor Assembly (B) (1) Cover Drum (1) Pulley Support Channel (2)
More informationSnake Bus Power Distribution
Snake Bus Power Distribution ELECTRICAL CHARACTERISTICS Rated Current 50 Amps Rated Voltage 208Y/120 or 480Y/277 Volts Frequency 50/60 Hz Conditional Short Circuit Rating (Protection device) 16 KA Conductor
More informationIMPORTANT SAFETY INSTRUCTIONS
INSTALLATION INSTRUCTIONS READ ALL OF THESE INSTALLATION INSTRUCTIONS BEFORE INSTALLING THE TRACK SYSTEM SAVE THESE INSTRUCTIONS AND REFER TO THEM WHEN ADDITIONS TO OR CHANGES IN THE TRACK CONFIGURATION
More informationA B C D E F. b.tools Required (supplied by others) 3/16" Drill Bit 3/8" Wrench Phillips Head Screwdriver
Page 1 of 13 5E.1 Parts List a. Below Deck Automatic Retractable Security Cover Kit (1) Tube End Bearing Plate (A) (1) Rope Reel with Motor Attached (B) (1) Rope Reel Cover (C) (1) Cover Drum (1) Cover
More informationMuseum Alkmaar - Alkmaar, Netherlands
Museum Alkmaar - Alkmaar, Netherlands 270 Lytespan 1 283 Lytebeam 287 Universal Suspensions TRACK 292 Nanotrack 1 267 TRACK Strellson - Moscow, Russia Construction: Total Max Load: Finish: Extruded aluminium
More informationINTELLIGENT MEDIUM POWERBAR
INTELLIGENT MEDIUM POWERBAR POWERBAR INTRODUCTION TECHNICAL FEATURES Intelligent Medium Powerbar is a patented range of busbar trunking that is utilized within Data Centers and various industrial applications
More informationFiberGuide Fibre Management Systems
FiberGuide Fibre Management Systems Table of Contents Introduction...................................................................... 1 Features and Benefits..............................................................
More informationRunning Magnet 2.0 Recessed High-tech LED lighting system for interior architecture
Description Fun with magnets and light. Simultaneously graphic and subtle, the Running Magnet is flexible, precise, and as creative as you. It is track lighting redesigned and elegantly refined. Light
More informationES44-LED SERIES DIRECT OR INDIRECT HIGH EFFICIENCY LED - RECESSED, SURFACE, WALL OR SUSPENDED
ES44-LED SERIES DIRECT OR INDIRECT HIGH EFFICIENCY LED - RECESSED, SURFACE, WALL OR SUSPENDED PERFORMANCE CHARACTERISTICS Optical Efficiency: 90.5% max Lumens per watt: 180 max Lumen output: 2200Lm/ft
More informationProduct Overview. High Power 7W/ft. Fixture Summary (see following pages for more information) Power Level Watts Per Foot
Linea 1.5" Pendant Direct Features Quick-Line Linea 1.5" delivers your design scenario seamlessly and on time, everytime. Streamlined and flexible, these architectural LED pendants provide the freedom
More informationMIRRORLITE RECESSED EMERGENCY LIGHTING
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. MIRRORLITE RECESSED EMERGENCY LIGHTING INSTALLATION AND OPERATING INSTRUCTIONS IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should
More informationLB - LIGHTING BUSWAY 25-40A
16 LB - LIGHTING BUSWAY 25-40A LIGHTING BUSWAY SECTION CONTENTS 18 General features 24 Trunking components: 2 and 4 conductors elements 28 Trunking components: 6 conductors elements 30 Plugs 33 Fixing
More informationlight FULL BLEED APPLICATION SHOT RENDERING
A6 FULL BLEED APPLICATION SHOT RENDERING A6 ANATOMY POWERFUL PERFORMANCE High performance Nichia 80+ CRI LEDs provide an optimal source for tailored ing design. 4.44 3.44 FLEXIBLE SUSPENSION The variety
More informationVIA 2 LED PENDANT DIRECT/INDIRECT W W W. L U M E N W E R X. C O M
Shown with HLO optics ORDER GUIDE Integrated track DESCRIPTION PROJECT: Elegant and flexible, the Via 2 / pendant features the option of our Widespread TYPE: Optics for smooth ceiling brightness. NOTES:
More informationGenerator Fire Safety: Generator assemblies should be located outside the building.
SECTION 33 70 00 - ELECTRICAL DISTRIBUTION PACKAGED GENERATOR ASSEMBLIES Generator Fire Safety: Generator assemblies should be located outside the building. All fuel piping from the outside of the building
More informationNera. detail. fixture information. Unique aesthetic inspired by the visual void design philosophy. Luminaire sizes available in 2 x2, 3 x3 and 4 x4.
LED bottom detail inside lens detail white finish palladium finish 2016 DIMENSIONAL DATA FEATURES Unique aesthetic inspired by the visual void design philosophy. Luminaire sizes available in 2 x2, 3 x3
More informationLAD8 8 LED Architectural Downlight
Catalog # : Project : Prepared By : Date : LAD8 8 inch LED new construction downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even illumination
More informationLAD4 4 LED Architectural Downlight
Catalog # : Project : Prepared By : Date : LAD4 4 inch LED new construction downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even illumination
More informationFlexible, Customizable Power Solutions for Mission Critical Success
Flexible, Customizable Power Solutions for Mission Critical Success The most critical decision, for mission critical facilities. By their very nature, mission critical and data center facilities are extremely
More informationUser s Guide. Includes Mounting, Installation, and Product Registration
User s Guide Includes Mounting, Installation, and Product Registration 500 OutBack Power Systems FLEXware is a system of modular aluminum mounting hardware and installation components designed for convenient
More informationThe 4-Lamp Mega Fixture Built-in Barndoors Removable Reflector, Louver and Lamp Harness Twist-on Locking Center Mount True Match daylight, tungsten
The 8ft and 6ft Mega 4Bank DMX lighting systems are the largest portable soft lights designed by Kino Flo. They give the cinematographer or lighting designer a unique soft light that cannot be easily duplicated
More informationPowerWave Bus System. For More Information Use your QR Reader THE NEXT GENERATION OF FLEXIBLE POWER DISTRIBUTION
PowerWave Bus System tm For More Information Use your QR Reader THE NEXT GENERATION OF FLEXIBLE POWER DISTRIBUTION PDI PowerWave Bus System tm : designed specifically for the Critical Power Market The
More informationLAD6 6 LED Architectural Downlight
Catalog # : Project : Prepared By : Date : LAD6 6 inch LED new construction downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even illumination
More informationU060 LIGHTWAY INDEX GRAZERS WASHERS AMBIENT
Lighting is about creating an environment that uses light as the main medium of expression. It means having one s work blend seamlessly with the architecture, often at the risk of not being seen. It s
More informationDETAIL 'A' INTERIOR INSTALLATION. OVERALL ISOMETRIC VIEW (unless noted otherwise) 300C CARRIER 12 GA HANGER WIRE, BY OTHERS, NOT BY HUNTER DOUGLAS
3 " NOM. 316 G, ER V RO N HA. TYP SEE DETAILS A1.7 THROUGH A1.10 FOR FIXTURE OPENING RECOMMENDATIONS IE ARR XC 12 GA HANGER WIRE, BY OTHERS, NOT BY HUNTER DOUGLAS SEE DETAIL A1.2 A "M 1'-0 300C PANEL SPLICE
More informationeasy duct - an investement in your future
easy duct easy duct - an investement in your future LOWER COST THAN CONVENTIONAL JOINING METHODS Easy Duct clamp-together ducting eliminates rivets, screws, welds and other time-consuming and costly joining
More informationSECTION PANELBOARDS
SECTION 16470 PANELBOARDS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. The general provisions of the contract including General and Special Conditions and General Requirements shall apply to all work under
More informationFlexible, Customizable Power Solutions for Mission Critical Success
Flexible, Customizable Power Solutions for Mission Critical Success The most critical decision, for mission critical facilities. By their very nature, mission critical and data center facilities are extremely
More informationINSTALLATION INSTRUCTIONS HYLYTR WALL GRAZER
HYLYTR WALL GRAZER Page 1 of 11 IMPORTANT SAFETY INSTRUCTIONS When installing or using this recessed fixture basic safety precautions should be followed Read ALL INSTRUCTIONS before installing fixture.
More informationPOWERBUS 225 Busway and Plug-In Units
Busway and Plug-In Units Class 5600 CONTENTS Schneider Electric Brands Description Page Product Descriptions.................................................. 3 POWERBUS 225 Busway System.....................................
More informationSelection and Application Guide. busway system. Cost-effective Power Distribution Compact Design
Selection and Application Guide busway system XJ-L Cost-effective Power Distribution Compact Design Specifications New for 2007..400A XJ-L Busway XJ-L Busway is available up to 400A. First introduced in
More informationDESCRIPTION PROJECT: Via 2 features our Asymmetrical Lens Optic for smooth, comfortable
ORDER GUIDE Shown with ARO2 optics DESCRIPTION PROJECT: Via 2 features our Asymmetrical Lens Optic for smooth, comfortable TYPE: and efficient illumination of vertical NOTES: surfaces. Via 2 Asymmetric
More informationSTUD TM 3 Linear LED luminaire- T-bar Mount
DESCRIPTION The STUD TM is our most popular linear fixture. It is also the most flexible, allowing you to choose between recessed, surface or pendant mounted options with same extrusion. With DIMENSIONS
More informationElegance Electrician s Installation Guide
Elegance Electrician s Installation Guide CentraLite Systems, Inc. 6420 Wall St. Mobile, AL 36695 Phone: 877-466-5483 Fax: 251-607-9119 2003-2005 CentraLite Systems, Inc. Revised 10/20/2005 ELECTRICIAN
More informationLUMINAIRE ID DIRECT OPTICS INDIRECT OPTICS LIGHT SOURCE CRI DIRECT LUMEN PACKAGES. LED - high performance LED
ORDER GUIDE Shown with ARO2 optics DESCRIPTION Via 3 features our Asymmetrical Lens Optic for smooth, comfortable and efficient illumination of vertical surfaces. Via 3 Asymmetric offers a wide range of
More informationBUSWAY Low Voltage (Pow-R-Flex)
BUSWAY LOW VOLTAGE (POW-R-FLEX) PART 1 GENERAL 1.01 1.02 SCOPE The Contractor shall furnish and install the busway system including all necessary fittings, hangers and accessories as specified herein and
More informationLED IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION To reduce the risk of death, personal injury or property damage from fire, electric shock, falling
More informationLuminaire PROFILE-SPOKE 15 UP 85 DN LED (PS1-D) Type. Notes. Performance Summary D OPTIONS 3S A 28 W B 34 W C 44 W D 57 W
T F W 604.549.9379 604.549.9555 fluxwerx.com PROFILE - SPOKE Specification Data Luminaire PROFILE-SPOKE 15 UP 85 DN LED () Type Project Profile Spoke 3 (S3) Product Notes Profile Spoke 4 (S4) Performance
More informationIvalo Finiré 3 LED Recessed Lighting Installation Instructions
IMPORTANT INFORMATION Please Read Before Installing 367-2578e 1 09.20.16 Important Notes IC fixtures must be used for installations containing insulating materials and must be mounted away from heat producing
More informationKM Metering Inc. Product Catalog Smart Meters. EKM-Omnimeter Pulse v.4. EKM-Omnimeter II UL v.3
Product Catalog Smart Meters EKM-Omnimeter Pulse v.4 Our Most Advanced Universal Smart Meter now with the ability to count pulses from three pulse-output devices, and the ability to control two relays.
More informationRunning Magnet 2.0 Suspension Down High-tech LED lighting system for interior architecture
Description Fun with magnets and light. Simultaneously graphic and subtle, the Running Magnet is flexible, precise, and as creative as you. It is track lighting redesigned and elegantly refined. Light
More informationNanoLED NXT Cylinder LNRP3 Pendant
NXT NANOLED PENDANT - NANOLED PENDANT - CONDUIT CUTOUT NANOLED GLOW /cylinders Power and beauty are both in play with our sleek architectural cylinders. Concealing the same powerful LED technology of our
More informationOEM Services Your Partnership with Gripple - Product Support - Private Label Products - Custom Product Variations - Product Development & Prototyping
OEM Services Your Partnership with Gripple - Product Support - Private Label Products - Custom Product Variations - Product Development & Prototyping What are our OEM Services? Private Label Products Custom
More informationFINA SUSPENDED INSTALLATION INSTRUCTIONS
FINA SUSPENDED INSTALLATION INSTRUCTIONS 3 AC Cable Mounting (AC3) Installation... 2-4 AC Cable to Hub Mounting (AH4) Installation... 5-7 Pendant Pipe Mounting Installation... 8-9 Canopy Detail... 10-11
More informationBusway Construction. Bus Bars
Busway Construction Bus Bars A better understanding of what busway is can be gained by examining its construction. A typical Siemens Sentron busway section has three or four formed aluminum or copper bars
More informationPlaster Trim Flange Trim Trimless. for ceilings requiring a flange. Donn Fineline Armstrong Bolt
& VersaLux ARCHITECTURAL LIGHTING SERIES Fluorescent Slot Fluorescent Slot, Flush Lens TM 3.6250" Ceiling/Trim Detail Plaster Trim Flange Trim Trimless Drywall Fellert for ceilings requiring a flange Donn
More information4 ft 8 ft 12 ft. straight factory bent. End Cap for Recessed Track Mount for Bruck s GEO track. Offered in white, matte silver or black.
Fixture : Geo Track Geo Track GEO Track is a 2 circuit line voltage track that is surface mounted or recessed. GEO Track is lightweight, compact elegant design that is easy to install saving on overall
More informationRunning Magnet 2.0 Surface High-tech LED lighting system for interior architecture
RECESSED SURFACE SUSPENSION UP & DOWN Description Fun with magnets and light. Simultaneously graphic and subtle, the Running Magnet is flexible, precise, and as creative as you. It is track lighting redesigned
More informationCurving (S) (L) CHORD (C) (IR) (IR) Example
Showcases Showcase systems offer a wide selection of framing, lighting and door options that allow you to integrate the components of your choice into a custom showcase that meets your exact specifications.
More informationChapter 8 Interior Wiring and Lighting
Chapter 8 Interior Wiring and Lighting Review Questions 1. What tool if any, is used to remove a fuse that is to be replaced? 1. Pliers 2. Screwdriver 3. Fuse puller 4. None 2. OSHA has established specific
More informationThe Tracking Magnet Surface High-tech LED lighting system for interior architecture
Description The Tracking Magnet system is creative, flexible, reliable and precise. Accent fixtures can be rapidly exchanged and repositioned without tools using the magic of magnets. A variety of accent
More informationBLACK BODY DIMMING 800/1300/1500 LUMEN 6 LED NEW CONSTRUCTION/REMODEL
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT Black Body Dimming duplicates halogen dimming, offering a soft, natural, warm glow as light levels are reduced CCT warms from 3000K to K, while staying on the
More informationInstallation Instructions & Users Manual IMPORTANT SAFEGUARDS READ AND FOLLOW ALL SAFETY INSTRUCTIONS
Crystal Recessed Edge- lit LED Exit Signs Series CRRBB & CRRAC Battery Backup & AC Models 01.18.06 Installation Instructions & Users Manual IMPORTANT SAFEGUARDS READ AND FOLLOW ALL SAFETY INSTRUCTIONS
More informationRIM 72" RIM 24" File Name: RIM-ROUND-PENDANT-SPEC Page: 1 / 9
DESCRIPTION Rim Round combines generous ambient illumination with elegant geometry. The 2" high extruded aluminum frame is formed and finished into a seamless ring that can be painted in a wide range of
More informationUnderstanding Electrical Terms
Understanding Electrical Terms Complimentary brochure from Understanding Electrical Terms In today s computer-intensive work environments, a critical issue is clean, reliable power. Powerlite is the industry
More informationRECESSED ASYMMETRIC MOUNT. Project. Type. Notes TECHZONE TM AND LOGIX TM COMPATIBLE
Project Type Notes 5 1/32" PERFORMANCE PER LINEAR FOOT AT 4000K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 750 lm/ft 7.5 W/ft 97 lm/w * Based on a 4 foot luminaire using one driver Please consult factory
More informationPROFILE 50 Up 50 Dn PF1-E. Luminaire PROFILE - 50 UP 50 DN LaED (PF1-E) Type. Project. Product. Notes. Performance Summary
T F W 604.549.9379 604.549.9555 fluxwerx.com PROFILE Specification Data PROFILE - 50 UP 50 DN LaED () Type Project Product Notes 50 Up I 50 Down A B C D Light (lm) 2350 2900 3500 4450 Energy (W) 19 24
More informationFINA F48 48 Direct and Uplight Architectural Round
Project Name Date Type 48 Direct and Uplight Architectural Round 4-1/2 4-7/8 (114.3mm) (123.8mm) 45-15/16 (1166.8mm) Key Features Extruded aluminum housing is rolled and welded for seamless finish with
More information