Warning: Review Before Submittal

Transcription

1 Smartrise Engineering, Inc 60 air Oaks Blvd. Sacramento, CA 9586 Phone: ax: Warning: eview Before Submittal TACTION DC Engineering Data orm Page 6070 ailure to Provide Accurate and Complete Information could result in the following: Delayed Controller Shipment, Price Change, and Incurred Engineering Charges. If a job specification is included you must complete the Build to Job Specification section on page. All ixtures must be VDC/6 Watts Max. If a category is not completed, the default option will be assumed. TACTION DC - Table of Contents by Page. Job Information. Shipping & Pre-Wire. General Controller Information. Motor/Encoder, and Brake Data 6. ixtures 7. Car Door Data 8. Landings and Openings 9. Elevator(s) Physical Layout 5. eatures & unctions This document can be edited, saved, and submitted electronically using Adobe eader. Job Details Job Name: PO #: Market Segment: ederal Health Care inancial esidential Job Location (City & State) Education Hospitality Purchasers Information: (If packager fill in End User Info on right) End User Information: (for packager use only) Name: Name: Title: Title: Company: Company: Phone: ax: Phone: ax: Cell: Cell: Engineering Contact Information: (If different than above) Name: Phone: ax: Cell: Date illed Out Notes and Special Instructions

2 Shipping and Pre-Wire TACTION DC - Engineering Data orm Page Shipping Information Contact Name: Phone: Contact ax/ Smartrise Call Prior to Shipping: Yes No Carrier Call for Delivery Appointment: Yes No Lift Gate equired: Yes No reight Terms Customer s Carrier Name: Use Smartrise Carrier: Yes No Carrier s Account Number: Collect Third Party Will Call Third Party Billing (Duties & Taxes) Pre-paid Ship to Name/Company: Bill To Address: Shipping Address: Shipping Schedule Controller(s) Desired Ship Date from Smartrise Controller(s) Desired Ship Date from Smartrise Note: Desired ship date from Smartrise is not an arrival date. Additional Shipping Instructions Pre-wire ixtures (Must be VDC/6 Watt Max) Not equired Pre-wire COP Boards: Pre-wire Hall Boards: Yes Yes No No ixture Manufacturer Company Name: Innovation ECC Ship to Address: Monitor MAD PTL Otis SL Car Calls SL Hall Calls Job eference: Contact Person at Mfg.

3 General Controller Information TACTION DC - Engineering Data orm Page Electrical Main Line and Transformer Specification Main Line Specification: Main Line Volts (Transformer required if motor volts are 0% greater than main line) Three Phase Single Phase Hz (Main Line is 60Hz unless stated otherwise) Main Line Transformer (If Customer equires) Provided by Smartrise Provided By Customer (custom to provide drawing) Environmental Considerations Secondary Voltage kva Data Plate Copy Included Not equired Configuration Simplex Group # Cars Group edundancy # Cars in Group Selective Collective ( buttons/floor, multiple calls) # of Hall isers/group Swing iser, Car # Non-Selective Collective ( button/floor, multiple calls) Non-Selective Non-collective ( button/floor, call at a time) Build to Job Specifications Not equired We will review the spec and will provide a list of exceptions when necessary. Job needs to be built to meet Engineering Specifications in Document provided EXCEPT those listed below (Provide Page/Section & Description of exceptions) Controller Cabinet Air-pressure cooled (add Vortex) (Customer to provide Air Compressor) Controller Cabinet Air conditioned cooled (add A/C Unit) Controller Cabinet orced Air cooled (add an and ilter) Arc lash Protection Special attention to hoist-way shaft (provide details in notes below) Outdoor or Hostile (Industrial Environment) NEMA ating for Machine oom Controller Cabinet (if required, default NEMA ) NEMA ating for Top of Car Enclosure (if required, default NEMA ) NEMA or Landing System (if required, default NEMA ) ASME 7. Elevator Safety Code Compliance Connection Package SmartConnect Package - ecommended (Pre-Wired Car Top Inspection Box Included) Car Operating Panel Single Panel Additional Local Code NYC (Appendix K) No ire Service MASSACHUSETTS Dual Panels Notes and Special Instructions emote Panel Controller Layout Preference Standard (M, CT, and COP) No Cartop No COP Custom: We will notify you if the preference chosen cannot be honored

4 Traction eatures, Motor/Encoder, and Brake Data TACTION DC - Engineering Data orm Page Traction eatures ( Car Contract Speed eatures for all cars is the same as car ) ailure to provide data will result in delay of controller shipment Capacity Encoder Provided By Smartrise None Customer (Include info in notes) Smartrise None Customer (Include info in notes) Smartrise None Customer (Include info in notes) Smartrise None Customer (Include info in notes) Customer Supplied Encoder Info Make Model Additional Motor Data for DC Motors ( Data for all cars is the same as car ) Car ield Values - ailure to provide data will result in delay of controller shipment orcing Voltage ull Speed Voltage Standing Voltage ipple ilter Coil Config. Series Parallel Series Parallel ield esistance esistance Value Acquired rom Datasheet Measured Datasheet Measured esistance Value While Coil Is... Cold Hot Cold Hot Below values measured at what Car Speed: Up at Contract Speed (VDC) Armature Values (at Contract Speed) ailure to provide data will result in delay of controller shipment Down at Contract Speed (VDC) Up at ull Capacity (amps) Down at ull Capacity (amps) Series Parallel Datasheet Measured Cold Hot Series Parallel Datasheet Measured Cold Hot Motor/Encoder Data ( Data for all cars is the same as car ) ailure to provide data will result in delay of controller shipment Motor Car Machine Brand/Model Volts LA HP PM Machine Type Geared Gearless Geared Gearless Geared Gearless Geared Gearless Location Overhead Basement Overhead Basement Overhead Basement Overhead Basement ope atio Sheave Dia. Gear atio Encodr PP Enc Cbl Length Enc Shaft Dia Brake Data ( Car DC DC DC DC Data for all cars is the same as car ) ailure to provide data will result in delay of controller shipment DC/AC AC ( Phase) AC ( Phase) AC ( Phase) AC ( Phase) AC ( Phase) AC ( Phase) AC ( Phase) AC ( Phase) Pick Volts (DC or AC) Hold Volts (DC Only) Coil esistance Coil Amperage Emergency ( nd ) Brake 0vac Hollister-Whitney ope Gripper Draka ope Brake (* below) 0vac Hollister-Whitney ope Gripper Draka ope Brake (* below) 0vac Hollister-Whitney ope Gripper Draka ope Brake (* below) 0vac Hollister-Whitney ope Gripper Draka ope Brake (* below) Independent ( nd ) Brake Data Hold Pick VDC Coil Ω Coil Amp VDC Independent nd DC Brake on Motor Independent nd DC Brake on Motor Independent nd DC Brake on Motor Independent nd DC Brake on Motor Hollister-Whitney ope Gripper if NOT 0vac. Specify Voltage: * or Draka 650 ope Brake (If Supplied by Smartrise) ope Spread ope Diameter Motor Control Preference Magnetek DSD Magnetek Quattro DC (regen included) We will notify you if the preference chosen cannot be honored Line eactor EMI/I iler Harmonic ilter ilters Notes and Special Instructions

5 eatures & unctions TACTION DC - Engineering Data orm Page 5 Special eatures Not equired Car Call Security (specify floors on page 9) Not equired emote ( nd ) ire Keyswitch & Lamp Earthquake (Includes Buzzer and Lamp) Car-to-Lobby Keyswitch an and Light Auto Shutoff Circuit (CT only) Machine oom Cabinet Light Machine oom Cabinet Power Plug Shunt-Trip lood Sensor S Button Using COP loor Buttons as Code Entry Using Dry Contacts from Card eaders and/or Keyswitches Input in Car Station Input in Machine oom Override Security When on Independent Service or Attendant Service Provide a Car Call Security Override Input Input in Car Station Input in Machine oom Door Open Button unctions on Secured Landings Considerations Mechanical Normal Limits (Mechanical Switches not provided by Smartrise) Special Modes of Operation Not equired Independent Service Hoistway Access Yes No In-Car Inspection Switch (uses top/bottom car calls) CT Inspection requires an In Car Inspection (Hoist-way or IC) Non-standard Medical Emergency Service (provide floor(s) on page 8) Building is a Hospital with keys at every floor In Car Buzzer, In Car Lamp, and Hallway Lamp at each loor are included Non-hospital Phase key at main level only In Car Buzzer and In Car Lamp are included Hall Call Security Provide Enable/Disable all Hall Calls Input (simplex) Provide a Hall Call Security Override Input (per floor) Dry Contacts in Hall ixtures Considerations Signals in Machine oom Not equired Sabbath (attach spec) Attendant Service Not equired Attendant Service (Is NOT Independent Service) In Car Buzzer In Car Lamp Choose : Hall Call Above/Below Lamps Non-directional (all hall call lamps) : Controller Monitoring System Not equired Designed and Manufactured by Smartrise Engineering SmartView.0 Monitoring Quantity Number of 7 Inch Viewing Devices Number of Inch Viewing Devices Emergency Power (if generator cannot run all cars) Not equired E.P. Contact from Generator is Normally Open Normally Closed Power Pre-Transfer Contact from Generator is Normally Open Normally Closed Not Present Emergency Power Car Selector Switch Single Car Selection Multiple Car Selection (provide details below) Number of cars the generator can operate simultaneously. (default value is car) Generator powers other Simplex/Groups. Access outside of Machine oom Designed and Manufactured by Integrated Display Systems Lift-Net (interface only) Designed and Manufactured by Kings III of America OM (interface only) Number of 9 Inch Viewing Devices Outside machine room requires cloud subscription through Smartrise and internet access. Inside the machine room requires Wii on PC or tablet.

6 Cables and ixtures TACTION DC - Engineering Data orm Page 6 Custom Traveler and Hoist-way Cable (Purchase from Smartrise) Not equired Traveler Cable Traveler Cable: Part # TCSXS our AWG Twenty 8 AWG our 0 AWG Shielded Jacketed Pairs One G 6/U Coaxial Cable Steel Core Textile Braid and PVC Jacket Kellum Support Grip Pair Length of Cable(s) Per car (in feet) Car Car Car 5 Car 6 Hoistway Cable Hoistway Cable, Part #HC8S Twenty-one 8 AWG Insulated Conductors All ixtures must be VDC/6 Watts Max. In Car Position Indicator Not equired In Hall Position Indicator Not equired CE Micro Com Discrete Signals (one line per floor) CE Micro Com Discrete Signals (one line per floor) Discrete Signals (binary) Discrete Signals (binary) DL-0 (interface only) SL : EX-5/EX (interface only) SL In Car Arrival Lantern Not equired # of loors with Hall Position Indicators : CE Micro Com Discrete Signals In Hall Arrival Lanterns Not equired Bulb/Chime wattage (if Discrete): SL : irst loor Only (Discrete) All loors (Smartrise Hall Boards) CE Micro Com Lanterns (Type: SA0M eq.) In Car Passing Chime Not equired EX-5/EX (interface only) SL CE Micro Com Discrete Signal SL If Lamps/Gongs are not VDC/6 Watt. (explain below) Bulb/Chime wattage (if Discrete): In Car Voice Annunciator Not equired CE Micro Com Speaker is emote Lobby Panel Not equired SL Door Open Lamp In Use Lamp Provided By: Smartrise Customer (must be CE or Emotive wire) On Independent Svc. Lamp In Service Lamp : Emergency Power Lamp Load Weighing Load Weigher Provided By Not equired Overload Lamp equirements Smartrise (EMCO) Customer Anti-Nuisance # opes ope Diameter : oping : oping

7 Car Door TACTION DC - Engineering Data orm Page 7 Door Type Use this door for all cars, or specify which cars use it All Car Car Door Type Use this door for all cars, or specify which cars use it All Car Car Hall Door Type Hall Door Type Auto Passenger Powered reight (see * below) Manual Auto Passenger Powered reight (see * below) Manual Select Door Operator Abell ATS 0090 ield EZ GAL MODCTL vdc interface relays GAL MOD L, G, or X GAL MOV 0vac input voltage Kone Mac 0 or 05D interface board Kone PMSSC 0 or 05D interface board Otis AT-00 0 AC/0 VDC Interface Select Door Operator Abell ATS 0090 ield EZ GAL MODCTL vdc interface relays GAL MOD L, G, or X GAL MOV 0vac input voltage Kone Mac 0 or 05D interface board Kone PMSSC 0 or 05D interface board Otis AT-00 0 AC/0 VDC Interface Otis AT-00/Glide P Multi-Drop Otis AT-00/Glide P Multi-Drop TKE Dover HD-0 equires IO Card: 600TX (0vac) TKE Dover HD-7 Type D/IVO TKE Dover HD-9 DC Motor TKE HDLM equires UIT_I/O Card None Peelle Courion EMS Wireless ILearn Manual Car Gate *Input reight/door information at bottom TKE Dover HD-0 equires IO Card: 600TX (0vac) TKE Dover HD-7 Type D/IVO TKE Dover HD-9 DC Motor TKE HDLM equires UIT_I/O Card ermator VVV5 Linear Door Operator ermator VVV5 Linear Door Operator None Peelle Courion EMS Wireless ILearn Manual Car Gate *Input reight/door information at bottom *Input door information at bottom *Input door information at bottom Door Protection Photo Eye/Light Curtain Mechanical Safety Edge Door Hold Button Door Protection Photo Eye/Light Curtain Mechanical Safety Edge Door Hold Button Cam Mechanical DC AC ( Phase) AC (Single Phase) Volts Amps Cam Mechanical DC AC ( Phase) AC (Single Phase) Volts Amps Gate elease DC AC ( Phase) AC (Single Phase) Volts Amps Gate elease DC AC ( Phase) AC (Single Phase) Volts Amps Door Considerations Door Considerations * reight/ Door Operator Info Notes and Special Instructions: Manufacturer Model eference # s Job Prints from Door Manufacturer are equired

8 Landings and Openings TACTION DC - Engineering Data orm Page 8 loor Information loor Label Overhead -> loor Openings loor Height (default ft) Car Call Security Hall Call Security Hosp Car Car Car Car Car Car We will default to the lobby landing and the landing above for main and alternate fire floor respectively Default PI Labels Pit -> Pit Pit Pit Pit (default ft) All cars same as Car All walk-through Main ire/lobby loor Alt ire loor EMT/lood loor All front Number of floors: All cars same as Car All walk-through All front Number of floors: All cars same as Car All walk-through All front Number of floors: If mixed / please select boxes above. Total Hoistway Height (ft) Car Car Include Hall Network Cat5 package Controller (M) to Hall Network (Hoist-way) Cat5 Cable Length Walkthrough Only: Top Location of Hoist-way Up/Dn Switch Car #s Walkthrough Only: Bottom Location of Hoist-way Up/Dn Switch Car #s All cars same as Car 5 ft 50 ft Hoist-Way Considerations Ambient Light Present in Hoist Way Notes and Special Instructions: Overlay with Existing Equipment Cross Cancellation System Cross egistration System When you choose one of the above a Smartrise engineer will contact you to gather details about the existing elevator controllers. Important: Provide Physical Layout on Sheet 9 00 ft

9 Elevator(s) Physical Layout TACTION DC - Engineering Data orm Page 9 Example Door Opening ( or ) No Opening Car Car Wall/Barrier Draw a topographical map of elevator(s) location on grid provided. * Accurately label each car by number/letter * Mark openings: (front) or (rear) * Label risers as: G = Group iser I = Inconspicuous iser H = Hospital Service iser * Draw in walls/barriers (heavy line) Notes/Special Considerations G G Car Label Group Hall iser