Recommended Price List. SPARE PARTS for Submersible Motors and Accessories
|
|
- Kimberly Blair
- 6 years ago
- Views:
Transcription
1 Recommended Price List SPARE PARTS for Submersible Motors and Accessories Effective: 5 January 2009 Issue A Replaces Price List: 28 July 2008 ENCAPSULATED REWINDABLE 304SS 316SS 904LSS The Company You Trust Deep Down
2
3 Franklin Electric (Australia) Pty Ltd HOW TO CONTACT US Effective: 5 Jan 2009 Replaces: Jul 08 Page i For more motor or product technical information and our network of Franklin Authorised Motor Service shops, there are many ways to contact us: Call us... Local National International (61) Fax us... Local National International (61) Write us. PO Box 4023 Dandenong South Victoria, Australia, 3164 Visit us Micro Circuit Dandenong South Victoria, Australia, us... feaustralia@fele.com Visit our web site Franklin Electric Australia Pty Ltd ABN: NZ IRD:
4 TERMS AND CONDITIONS OF SALE Page ii, 5 Jan 09 A CONTROLLING TERMS AND CONDITIONS 1. The following terms and conditions ( the Terms ) shall be incorporated into every contract for the sale and/or delivery of products by Franklin Electric (Australia) Pty Ltd. ( Franklin Electric (Australia) ) to a purchaser ( Purchaser ). Any terms or conditions put forward by Purchaser whether in a purchase order or otherwise which purport to amend, annul or augment the Terms shall not be binding on Franklin Electric (Australia) unless agreed to in writing by Franklin Electric (Australia). The Terms together with the confirmation of order, in a form acceptable to Franklin Electric (Australia), and Franklin Electric (Australia s) standard of custom product specifications (if applicable) shall constitute the entire agreement between Franklin Electric (Australia) and Purchaser. 2 The Terms and the Contract may be amended or altered only if agreed to in writing, signed by the party against which any such amendment or alteration is asserted. B THE PRICE 1. All prices and discounts are subject to change by Franklin Electric (Australia) without prior notice, effective upon Franklin Electric (Australia s) publication of its revised price list or discount schedule applicable thereto, or, in lieu thereof, written notification by Franklin Electric (Australia) to Purchaser. Prices and discounts applicable to undelivered quantities of existing orders, as well as to new orders, shall be those in effect at the time of despatch. 2. A representation by Purchaser of facts, upon which Franklin Electric (Australia) relies in basing any applicable discount or terms of sale, shall be taken as a representation that such facts are true; and Franklin Electric (Australia) shall have the right to revise any price of discount, including in relation to products already despatched, invoiced, or paid, should such representations be shown to be untrue. 3. All products are supplied FOB Franklin Electric (Australia s) Melbourne premises and are not of, and do not include, any federal, state or local income, property, sales, use, excise, value added, or other taxes, freight or other delivery charges, insurance costs or other expenses or duties payable in respect of goods sold and/or delivered by Franklin Electric (Australia) which amounts shall be payable by Purchaser. Purchaser should consult Franklin Electric (Australia s) current multiplier discount or net price catalogue pages for its policy regarding freight. C TERMS OF PAYMENT 1. The due date of payment shall be measured from the despatch date specified in the invoice issued by Franklin Electric (Australia) except that the due date shall be measured from any prior scheduled despatch date in the event that Purchaser has requested that delivery be delayed. 2. If the Purchaser fails to make payment in full by the due date Franklin Electric (Australia) shall be entitled to charge interest on the sum owing calculated on a daily basis from the due date until the date of receipt of payment at the rate of 3% above the base rate of the National Australia Bank from time to time in force. D DELIVERY 1. Delivery shall be arranged by Franklin Electric (Australia), unless otherwise provided herein. Special arrangements for delivery must be specifically requested by Purchaser and, if agreed to in writing by Franklin Electric (Australia), will be arranged at Purchaser s expense. 2 Stated times for delivery of products shall be estimates only. Franklin Electric (Australia) shall not be liable for any loss, cost, expense, delay, damage, or inconvenience or failure (however caused) to meet any specific delivery date, or for any delay, loss, or damage in transit, or due to the unavailability of sufficient products to fill any order. Franklin Electric (Australia) reserves the right to allocate available inventories among its customers, including Purchaser, on a pro rata basis, in the event that such inventories are inadequate to meet demand. 3. Deliveries of products shall be subject to quantity variations, more or less, of 10% on orders of units, 5% on orders of units, 4% on orders of units and 3% on orders in excess of 2000 units. Purchaser will only be billed for actual quantities despatched. 4. All risk of damage, loss or delay in relation to the despatched products shall pass to Purchaser when Franklin Electric (Australia) delivers such goods to the carrier for delivery to Purchaser. Franklin Electric (Australia) shall promptly, after despatch, notify Purchaser that the products have been delivered to the carrier and shall furnish Purchaser with all documents, if any be required, to enable Purchaser to obtain possession of the products when delivered. 5. Franklin Electric (Australia) shall retain title to all products despatched until receipt of payment in full from Purchaser of any sums due in respect of such products. Purchaser shall store products belonging to Franklin Electric (Australia) in such a way as to be identifiable as belonging to Franklin Electric (Australia). Subject to the following, Purchaser shall not, prior to payment in full, deal in any way with such products nor part with possession nor act in any way inconsistent with Franklin Electric (Australia s) ownership of the products. If Purchaser incorporates such products into composite goods, title to the composite goods shall vest in Franklin Electric (Australia) until payment in full is received. If, prior to payment in full, Purchaser sells or otherwise disposes of the products or composite goods, the proceeds of sale or other disposition shall belong to Franklin Electric (Australia) to the extent of all sums due. Franklin Electric (Australia s) right to retain title shall not affect its rights as unpaid seller. E WARRANTIES/FRANKLIN ELECTRIC DEFAULT/LIMITATION OF LIABILITY 1. Franklin Electric (Australia) warrants that its products will be free from defects in workmanship and materials, will perform consistently with samples previously supplied and will conform to applicable specifications published or agreed to between Purchaser and Franklin Electric (Australia) for a period of one (1) year from the date of installation (but in no event beyond two (2) years from the date of manufacture) ( Warranty Period ). 2. Any Franklin Electric (Australia) product found to be defective within the Warranty Period shall be repaired, replaced or taken back for credit by Franklin Electric (Australia) at Franklin Electric (Australia s) sole election. No allegedly defective product shall be returned to Franklin Electric (Australia), however, without Franklin (Australia s) prior written authorisation and delivery instructions. 3. Franklin Electric (Australia) makes no warranty, expressed or implied, with respect to the products sold to Purchaser under this contract except as set forth in this contract. Franklin Electric (Australia) shall not be liable whether as a result of any breach of warranty or of the Terms otherwise for any of Purchase s incidental expenses (including costs of inspection, testing, storage, or transportation), any other charges, costs, or expenses, or consequential damages incurred by Purchaser or by any third party (including lost profits, liability to third parties requirements), regardless of whether Franklin Electric (Australia) is shown to be at fault, and regardless of whether there is shown to have been a defect in materials or workmanship, negligence in manufacture or design, or failure to warn. Notwithstanding paragraph 2 above, in the event that Franklin Electric (Australia) is liable in any way as a result of any breach of warranty or of the Terms or otherwise, Franklin Electric (Australia s) liability shall not exceed the amounts paid by the Purchaser for the products under this contract. 4. The Terms that exclude or limit Franklin Electric (Australia s) liability shall apply to the extent permitted by law. The parties acknowledge that provisions of the Trade Practises Act 1974 (as amended) and other statutes from time to time in force in Australia may imply warranties or conditions or impose obligations upon Franklin Electric (Australia) which cannot be excluded, restricted or modified except to a limited extent. This contract shall be read and construed to any statutory provisions. If any such statuary provisions apply, then to the extent to which Franklin Electric (Australia) is entitled do so, its liability under those statutory provisions shall be limited at its opinion to: a) in the case of the supply of products: (i) the replacement of products or the supply of equivalent products; or (ii) the payment of the cost of replacing the products, or of acquiring equivalent products or (iii) the payment of the cost of having the products repaired or (iv) the repair of the products b) in the case of services: (i) the performance of the services again or (ii) the payment of the cost of having the services performed again. F PURCHASER S DEFAULT 1. In addition to and not withstanding any other remedy to which Franklin Electric (Australia) may be entitled by law or right hereunder, in the event of Purchaser s breach of its obligations hereunder including, but not limited to, Purchaser cancelling its order for products or this contract in whole or part, or refusing to accept the products despatched hereunder, or wrongfully revoking its acceptance of products that conform to the contract, Franklin Electric (Australia) shall be entitled to specific damages by reason of any special engineering, design, tooling, manufacturing, storage, or transportation costs incurred in connection with this contract. 2. In the event Purchaser breaches its obligations hereunder or if Purchaser becomes insolvent or enters into scheme of arrangement with its creditors or goes into liquidation or has a receiver or receiver and manager appointed to the whole or part of its assets, Franklin Electric (Australia) shall have the right to withhold deliveries of ordered products to purchaser and to terminate this contract and retain any payments already made by Purchaser. Such termination shall be without prejudice to Franklin Electric (Australia s) rights to recover payment from Purchaser for products delivered prior to termination and Franklin Electric (Australia) shall have the right to enter Purchaser s premises and to retake possession of products in respect of which title remains with Franklin Electric (Australia). G INFRINGEMENT 1. With respect to standard designs and specifications of, or speciality products engineered and designed by, Franklin Electric (Australia) or Franklin Electric Co. Inc., Franklin Electric (Australia) shall defend, indemnify and hold Purchaser harmless from and against any loss, damage, costs or expenses arising out of any claim by a third party of patent, design, copyright or claim and gives Franklin Electric (Australia) such authority, information and assistance as it may request in connection with the defence thereof. 2. Purchaser shall defend, indemnify and hold Franklin Electric (Australia) and/or Franklin Electric Co. Inc. harmless from and against any loss, damage, costs or expenses arising out of any claim of patent, design, copyright or trade mark infringement or other intellectual property right infringement relating to products manufactured by Franklin Electric (Australia) or Franklin Electric Co. Inc. according to designs or specifications furnished by Purchaser. H SPECIAL TOOLING Any special tools, dies, jigs, moulds or other equipment manufactured or purchased by Franklin Electric (Australia) for this contract, regardless of whether included as part of Franklin Electric (Australia s) prices for products, shall remain Franklin Electric (Australia s) exclusive property, unless otherwise provided herein. I APPLICABLE LAW This contract shall be governed by the laws of the State of Victoria and the parties hereby submit to the non-exclusive jurisdiction of the courts of Victoria. J FAILURE TO ENFORCE The failure of Franklin Electric (Australia) to enforce at any time or for any period of time any of these Terms shall not affect its right thereafter to enforce the same. 029.term Issue C 08/04
5 GENERAL NOTES about this Price List and Conditions of Sale. Page iii, 5 Jan 09 To be read and complied too with regard to Terms and Conditions of Sale. A PRICES Prices set out or referred to herein are recommended only and there is no obligation to comply with the recommendations. All prices listed are in Australian dollars and exclude all taxes. List Prices shown exclude; GST, VAT, Sales Taxes. Any taxes in force at time of invoice will be charged at applicable rates. B FRANKLIN SUBMERSIBLE CUSTOMERS The sale of Franklin submersible motors and associated products is limited to recognised global and domestic Original Equipment Manufacturers (OEMs) distributors, importers and dealers of submersible pumps, water system pumps, water system end users and to Class A Franklin Authorised Motor Service shops having operational facilities within Australia and/or New Zealand. C TERMS AND CONDITIONS OF SALE Every effort has been made to ensure accurate pricing, technical data, weights and dimensions. Any errors or omissions are subject to revision. All products are supplied and sold subject to Franklin Electric (Australia) Pty Ltd Terms and Conditions of Sale, February 1993, a copy of which is provided on the Page ii of this Price List. A copy is also available separately on request. Placement of orders accepts these Terms and Conditions including notes within this Price List. D SHIPPING AND FREIGHT All products are supplied Free On Board (FOB truck) from a Franklin Electric stocking facility. Stocking facilities are located at Franklin Electric, Dandenong South, Victoria, Australia and regional warehouses in Brisbane, Perth and Christchurch, New Zealand. All product dispatches will be at the OEMs or FAMS account, with prior notice of Freight carrier, type of service and account number. Franklin Electric can co ordinate freight carrier pickup booking only. Dispatches will not be charged to third party account numbers. All products are imported by sea freight. Should special indent products be required imported by air freight, this will be at set rates chargeable to the purchasers account. Franklin Electric and U.S. law forbid export or re export of Franklin products, directly or indirectly, to any country to which export is prohibited by U.S. government export regulations. Drop Shipments Drop shipments or shipments made to locations other than OEMs, their bona fide operations or FAMS is not allowed, however due to the size of Australia and shipping times, minimal drops are allowed providing all freight charges are to the purchasers (OEM-FAMS) freight account. No third party accounts. Customer Pick-Ups Customers wishing to pick-up motors from Franklin Electric or it s warehouses may do so providing such pick-ups are scheduled in advance and made during normal Franklin Electric working hours. Mail and Air Couriers Franklin offers prepaid air courier satchels and mail for dispatch of small parts, leads etc. All costs will be charged at preset rates to the purchasers account. E RETURN OF PRODUCTS Any products requested to be returned for credit must have prior written approval via a Return Material Authorisation (RMA) before return. A copy of the RMA should be returned with the goods. ALL returns are subject to restocking and administration fee; 7.5% up to 14 days, 15% up to 30 days and 35% over 31 days after date of invoice. Freight to be prepaid by sender. Products dispatched and held by purchaser over 30 days may only be returned at Franklin s discretion and with prior approval. Products that have been used in any way, connected electrically, connected to a pump and tested, submerged are considered used and are not returnable. All products returned are subject to inspection of packaging and product at Franklin Electric prior to being accepted. Damage to returned product and boxes/crates are subject to rejection and returned to the purchaser at their expense. F SPECIAL LEADS Leads of special length or construction are manufactured and built to order to customer requirements and are a non stocked item and therefore not returnable for credit or exchange. G 60 HERTZ MOTORS Franklin Electric Australia stocks 50 hertz products suitable for use within Australia and New Zealand. 60 hertz single and three phase products are available ex factory USA or Europe and are sold in US dollars only. 4, 6, 8 and 10 three phase motors offered in Australia are dual voltage/frequency motors: 460/ V, 60/50Hz and are excluded from this clause. H PRODUCT SPECIFICATIONS Franklin Electric is committed to provide its customers with defect free products through its program of continuous improvement. Product specifications and identification are subject to change without notice. Submersible motors comply with the following Standards and/or approvals, NEMA, UL, CSA,, EN, IEC 34-1, AS/NZ , IEC 85, AS/NZ 2768, IEC and IEC , AS/NZ , IEC , AS/NZ IEC/CSIPR 14, (EN5008, AS/NZ1044), ISO Standards subject to change. Details available on request. K CAUTIONS and WARNINGS Serious or fatal electric shock may result from failure to connect the motor control enclosure, metal plumbing, and all other metal near the motor or cable, to the power supply ground terminal using wire no smaller than the motor cable wires. To reduce risk of electrical shock, disconnect power before working on or around the water system. Do not use in swimming areas. This equipment is intended for installation by technically qualified personnel. Failure to install it in compliance with National and local electrical codes, and Franklin Electric recommendations, may result in electrical shock or fire hazard, unsatisfactory performance and equipment failure. Franklin Electric installation information is available from pump manufacturers and distributors, and directly from Franklin Electric.
6 Page iv, 5 Jan 09 This page has been left blank intentionally
7 4" 3 wire PSC Spare Parts 304SS 1 phase Page 1 A to 0.55kw Thrust kit A to 1.5kw Thrust kit A3 2.2kw Thrust kit Kit B Seal kit Kit C Screw kit to 0.55kw Upper end bell to 2.2kw Upper end bell to 0.55kw Lower end bell to 1.5kw Lower end bell kw Lower end bell to 0.55kw Upthrust washer to 2.2kw Upthrust washer 1.40 A to 0.55kw Thrust kit 4" 2 wire Spare Parts 1phase A to 0.55kw Thrust kit A to 1.1kw Thrust kit Kit B Seal kit Kit C Screw kit to 1.1kw Upper end bell to 0.55kw Lower end bell to 1.5kw Lower end bell to 0.55kw Upthrust washer to 1.1kw Upthrust washer 1.40 ALL BIAC Switch ALL O Ring for BIAC Switch " 3 wire 304SS Spare Parts 1 phase A to 0.55kw Thrust kit A to 1.5kw Thrust kit A3 2.2kw Thrust kit Kit B Seal Kit Kit C Screw Kit to 0.55kw Lower End Bell to 0.55kw Upper End Bell to 2.2kw Upper End Bell to 0.55kw Upthrust washer to 2.2kw Upthrust washer 1.40
8 4" 3 wire 304SS Spare Parts 3 phase Page 2 A to 0.75kw Thrust kit A2 1.1 to 1.5kw Thrust kit A3 2.2 to 3kw Thrust kit Kit B Seal Kit Kit C Screw Kit to 0.75kw Lower End Bell to 1.5kw Lower End Bell to 3kw Lower End Bell to 0.75kw Upper End Bell to 3kw Upper End Bell to 0.75kw Upthrust washer to 3kw Upthrust washer " 3 wire 316SS Spare Parts 1 phase A to 0.55kw Thrust kit A to 1.5kw Thrust kit A3 2.2kw Thrust kit Kit B Seal kit Kit C Slinger kit Kit D Screw kit to 2.2kw Upper end bell to 0.55kw Lower end bell to 1.5kw Lower end bell kw Lower end bell to 2.2kw Upthrust washer " 316SS Spare Parts 3 phase A to 0.75kw Thrust kit A2 1.1 to 1.5kw Thrust kit A3 2.2 to 3kw Thrust kit Kit B Seal Kit Kit C Slinger Kit Kit D Screw Kit to 0.75kw Lower End Bell to 1.5kw Lower End Bell to 3kw Lower End Bell to 3kw Upper End Bell to 3kw Upthrust washer 2.80
9 Page 3 4" 3 wire 304SS High Thrust Spare Parts 1 phase A 2.2 to 3.7kw Thrust kit B 2.2 to 3.7kw Seal kit C 2.2 to 3.7kw Screw kit D1 2.2 to 3.7kw Upper end bell to 3.7kw Lower end bell to 3.7kw Upthrust washer " 3 wire 316SS High Thrust Spare Parts 1 phase A 2.2 to 3.7kw Thrust kit B 2.2 to 3.7kw Seal kit C 2.2 to 3.7kw Slinger kit to 3.7kw Upper end bell to 3.7kw Lower end bell D 2.2 to 3.7kw Screw kit to 3.7kw Upthrust washer " 304SS High Thrust Spare Parts 3 phase A 2.2 to 7.5kw Thrust kit B 2.2 to 7.5kw Seal kit C 2.2 to 7.5kw Screw kit D1 2.2 to 3.7kw Upper end bell D2 4 to 7.5kw Upper end bell to 3.7kw Lower end bell to 7.5kw Lower end bell to 3.7kw Upthrust washer to 7.5kw Upthrust washer " 316SS High Thrust Spare Parts 3 phase A 2.2 to 7.5kw Thrust kit B 2.2 to 7.5kw Seal kit C 2.2 to 7.5kw Slinger kit D 2.2 to 7.5kw Screw kit to 7.5kw Upper end bell to 7.5kw Lower end bell to 7.5kw Upthrust washer 2.80
10 6" 304SS Encapsulated Spare Parts 3 phase Page 4 A2 4 to 22kw Thrust kit A3 30 to 45kw Thrust kit B3 4 to 30kw Seal Kit ( Sand fighter) B4 37 to 45kw Seal Kit ( Sand fighter) C 4 to 45kw Slinger kit D 4 to 45kw Screw kit Sleeve Bearing to 45kw C.I. upper end bell to 45kw Y.D. upper end bell to 45kw Lower end bell to 45kw Thrust Housing to 45kw Upthrust washer to 45kw Diaphragm cover to 45kw Sleeve Journal Lower to 45kw Sleeve Journal Upper to 45kw Filter Assy kw Woodruff Key to 45kw Adjusting Screw to 45kw Spring to 45kw Ground Screw to 45kw Lockwasher Ground to 45kw Square Washer " 316SS Encapsulated Spare Parts 3 phase A2 4 to 22kw Thrust kit A3 30 to 45kw Thrust kit B1 4 to 30kw Seal Kit ( Sand fighter) B2 37 to 45kw Seal Kit ( Sand fighter) C 4 to 45kw Slinger kit D 4 to 45kw Screw kit Sleeve Bearing to 45kw ss upper end bell to 45kw Y.D. upper end bell to 45kw Lower end bell to 45kw Thrust Housing to 45kw Upthrust washer to 45kw Diaphragm cover kW Screw Plug kW Screw Plug to 45kw Sleeve Journal Lower to 45kw Sleeve Journal Upper kw Woodruff Key to 45kw Adjusting Screw to 45kw Cup Spring to 45kw Ground Screw to 45kw Lockwasher Ground to 45kw Square Washer 9.15
11 8" 304SS Encapsulated Spare Parts 3 phase Page 5 Kit A1 30 to 75kw Thrust kit Kit A2 93 to 150kw Thrust kit Kit B1 30 to 75kw Seal kit Kit B2 93kw Seal kit Kit B3 110 to 150kw Seal kit Kit C1 30 to 75kw Screw kit Kit C2 93 to 150kw Screw kit Kit D1 93 to 150kw Radial bearings ALL Sleeve Journals Kit D2 30 to 75kw Sleeve bearings upper Sleeve bearings lower to 45kw C.I. Upper end bell to 75kw C.I. Upper end bell kw C.I. Upper end bell to 150kw C.I. Upper end bell to 75kw Lower end bell to 150kw Lower end bell to 75kw C.I. Thrust housing to 150kw C.I. Thrust housing to 75kw Diaphragm cover to 150kw Diaphragm cover to 75kw Upthrust washer to 150kw Upthrust washer to 150 kw Square Washer to 150 kw Screw Ground to 150 kw Lockwasher Ground 12.25
12 Page 6 8" 316SS Encapsulated Spare Parts 3 phase Kit A1 30 to 75kw Thrust kit Kit A2 93 to 150kw Thrust kit Kit B1 30 to 75kw Seal kit Kit B2 93kw Seal kit Kit B3 110 to 150kw Seal kit Kit C1 30 to 75kw Screw kit Kit C2 93 to 150kw Screw kit Kit D1 93 to 150kw Radial bearings Sleeve Journals Kit D2 30 to 75kw Sleeve bearings upper ALL Sleeve bearings lower to 45kw ss Upper end bell to 75kw ss Upper end bell kw ss Upper end bell to 150kw ss Upper end bell to 75kw Lower end bell to 150kw Lower end bell to 75kw ss Thrust housing to 150kw ss Thrust housing to 75kw ss Diaphragm cover to 150kw ss Diaphragm cover to 75kw Upthrust washer to 150kw Upthrust washer to 150 kw Square Washer to 150 kw Screw Ground to 150 kw Lockwasher Ground 12.25
13 TOOLS, FILL KIT, STATORS and ROTOR Spare Parts Page 7 Model Number Description List RK-6-2 TOOL RK-6-10 TOOL RK-8-3 TOOL RK-8-13A TOOL RK-8-14 TOOL RK-10-2 TOOL RK-10-8 TOOL 6 HEIGHT GAUGE GMG DET1 8 HEIGHT GAUGE GMG DET2 8 HEIGHT GAUGE RK 12-1S TOOL FILLING KIT Encapsulated motor STATORS ALL Sizes and models POA Provide motor model number, rating size and/or existing stator part number Encapsulated motor ROTORS ALL Sizes and models POA Provide motor model number and rating size
14 6" 304SS Rewindable Spare Parts 3 phase Page 8 Kit1 4 to 26kw Thrust kit Kit1 30 to 37kw Thrust kit Kit2 4 to 26kw Radial bearing kit Kit2 30 to 37kw Radial bearing kit Kit3 4 to 37kw Seal kit ( Sand fighter) Kit4 4 to 37kw Screw kit Kit5 4 to 37kw Valve kit to 13kw Lead seal kit 304 ss to 22kw Lead seal kit 304 ss to 30kw Lead seal kit 304 ss kw Lead seal kit 304 ss to 26kw CI Upper end bell to 37kw CI Upper end bell to 26kw Bearing body lower to 37kw Bearing body lower to 37kw Thrust Housing to 37kw Spring to 37kw Diaphragm cover to 37kw Threaded plug Pt ss to 37kw Spring plate to 37kw Winding housing top to 37kw Support Ring " 316SS Rewindable Spare Parts 3 phase Kit1 4 to 26kw Thrust kit Kit1 30 to 37kw Thrust kit Kit2 4 to 26kw Radial bearing kit Kit2 30 to 37kw Radial bearing kit Kit3 4 to 37kw Seal kit ( Sand fighter) Kit4 4 to 37kw Screw kit Kit5 4 to 37kw Valve kit to 13kw Lead seal kit 316 ss to 22kw Lead seal kit 316 ss to 30kw Lead seal kit 316 ss kw Lead seal kit 316 ss to 26kw Upper end bell 316ss to 37kw Upper end bell 316ss to 26kw Bearing body lower to 37kw Bearing body lower to 37kw Thrust Housing to 37kw Spring to 37kw Diaphragm cover to 37kw Threaded plug Pt ss to 37kw Spring plate to 37kw Support Ring 4.65
15 6" 904L Rewindable Spare Parts 3 phase Page 9 Kit1 4 to 26kw Thrust kit Kit1 30 to 37kw Thrust kit Kit2 4 to 26kw Radial bearing kit Kit2 30 to 37kw Radial bearing kit Kit3 4 to 37kw Seal kit ( 904L) Kit4 4 to 37kw Screw kit Kit5 4 to 37kw Valve kit to 13kw Lead seal kit 904L to 22kw Lead seal kit 904L to 30kw Lead seal kit 904L kw Lead seal kit 904L to 26kw Upper end bell 904L to 37kw Upper end bell 904L to 26kw Bearing body lower to 37kw Bearing body lower to 37kw Thrust Housing 904L to 37kw Spring to 37kw Diaphragm cover to 37kw Threaded plug Pt ss to 37kw Spring plate to 37kw Support Ring Filling kit to 13kw x 4m Lead to 22kw x 4m Lead to 30kw x 4m Lead kw x 4m Lead
16 8" 304/316 SS Rewindable Spare Parts 3 phase D.O.L. Page 10 Kit1 30 to 93kw Thrust bearing kit Kit2 30 to 93kw Radial bearing kit Kit3 30 to 93kw Seal kit Kit4 30 to 93kw Upthrust kit Kit5 30 to 93kw Screw kit to 93kw Upper end bell (adaptor 304ss) to 93kw Upper end bell (adaptor 316ss) to 93kw Bearing body upper to 93kw Bearing body lower to 93kw Thrust housing 304ss to 93kw Thrust housing 316ss to 93kw Ring to 93kw Diaphragm cover to 93kw Protection plug to 93kw Thrust support to 93kw Threaded plug G1/2" 316ss to 93kw Pressure relief valve to 93kw Threaded plug Pt ss to 45kw Lead seal kit to 60kw Lead seal kit to 93kw Lead seal kit to 45kw x 6m lead to 60kw x 6m lead to 93kw x 6m lead
17 10" 304/316 SS Rewindable Spare Parts 3 phase D.O.L. Page 11 Kit1 85 to 185kw Thrust bearing kit Kit2 85 to 185kw Radial bearing kit Kit3 85 to 185kw Seal kit Kit4 85 to 185kw Upthrust kit Kit5 85 to 185kw Screw kit to 185kw Upper end bell (adaptor 304ss) to 185kw Upper end bell (adaptor 316ss) to 185kw Bearing body upper to 185kw Auxiliary impeller to 185kw Bearing body lower to 185kw Thrust support to 185kw Thrust housing 304ss to 185kw Thrust housing 316ss to 185kw Protection plug to 185kw Supporting ring diaphragm to 185kw Diaphragm cover to 185kw Threaded plug G1/2" 316ss to 185kw Pressure relief valve to 185kw Threaded plug Pt ss to 130kw Lead seal kit to 130kw Y.D Lead seal kit to 185kw Y.D Lead seal kit to 130kw x 6m lead to 130kw Y.D x 6m leads to 185kw Y.D x 6m leads to 185kw x 8m lead Above spare parts for Gen 1 10 REW. For Gen 2 Redesign contact Franklin Electric on 1300 FRANKLIN Model number and serial number will be required to identify correct design. These can be obtained from the data panel etched onto the stator shell.
18 6, 8 and 10" REWIND KITS Page 12 6 RW 5.5 kw Rewind Kit PVC RW 7.5 kw Rewind Kit PVC RW 9.3 kw Rewind Kit PVC RW 11kW Rewind Kit PVC RW 13kW Rewind Kit PVC RW 15 kw Rewind Kit PVC RW 18.5 kw Rewind Kit PVC RW 22 kw Rewind Kit PVC RW 26 kw Rewind Kit PVC RW 30 kw Rewind Kit PVC RW 37 kw Rewind Kit PE RW 30 kw Rewind Kit PVC RW 37 kw Rewind Kit PVC RW 45 kw Rewind Kit PVC RW 52 kw Rewind Kit PVC RW 55 kw Rewind Kit PVC RW 60 kw Rewind Kit PVC RW 67 kw Rewind Kit PVC RW 75 kw Rewind Kit PVC RW 83 kw Rewind Kit PVC RW 93 kw Rewind Kit PVC RW 85 kw Rewind Kit PVC RW 110 kw Rewind Kit PVC RW 130 kw Rewind Kit PVC RW 150 kw Rewind Kit PVC RW 185 kw Rewind Kit PVC PE2 High temperature windings are available on request. POA
19 CONTROL BOX Spare Parts Page 13 Kit Number Model Number Description List 1.5 kw PSC CAPACITOR START/RUN 50mfd 440V OVERLOAD, Built into 1.5 kw PSC motor 0.75 kw CSIR CAPACITOR/OVERLOAD mfd 220V kw CSCR CAPACITOR RUN 10mfd 370V kw CSCR CAPACITOR START mfd 220V kw CSCR OVERLOAD kw CSCR CAPACITOR RUN 20mfd 370V kw CSCR* *CAPACITOR START mfd 220V kw CSCR* *OVERLOAD START kw CSCR OVERLOAD RUN kW CSCR CAPACITOR RUN 35mfd 370V kw CSCR CAPACITOR START mfd 330V kw CSCR OVERLOAD RUN KW CSCR OVERLOAD START kW CSCR CAPACITOR RUN 30mfd 370V kW CSCR CAPACITOR RUN 45mfd 370V kw CSCR* *CAPACITOR START mfd 220V kw CSCR OVERLOAD RUN kw CSCR* *OVERLOAD START * Used in more than one model CB All CB RELAY KIT 50Hz 64.75
20 Control Box Parts; Old - New Comparisons Page 14 Model Prefix kw HP QTY Component New Part No Old Part No CSIR 1 Relay Capacitor mfd 220v O/L in case CSCR 1 Relay Start Capacitor mfd. 220v Run Capacitor 10mfd.370v Overload CRG71LB CSCR 1 Relay Start Capacitor mfd. 220v Run Capacitor 20mfd.370v Start Overload CRG 70 EB Run Overload CRJ 31HB CSCR 1 Relay Start Capacitor mfd. 220v Run Capacitor 35mfd.370v Start Overload CRG67JB Run Overload BHR29HB CSCR 1 Relay Start Capacitor mfd. 220v Run Capacitor 30mfd.370v Run Capacitor 45mfd.370v Start Overload CRJ31HB Run Overload BRHOOHD PSC 1 Start/ Run Capacitor 50 mfd.440v (O/L is in the matching motor) Updated: 13 Dec 1999
RSPO PalmTrace - Book and Claim Terms and Conditions
1. Introduction 1.1 The Roundtable on Sustainable Palm Oil ( RSPO ), a non-profit association registered in Switzerland under Swiss law, supports the following supply chain models for the uptake of certified
More informationWARRANTY POLICY. Grid-Tied Photovoltaic Inverters. Revision D. 2014, Solectria Renewables, LLC DOCIN
WARRANTY POLICY Revision D 2014, Solectria Renewables, LLC DOCIN-070360 1 Product Warranty & RMA Policy 1. Warranty Policy Warranty Registration: It is important to have updated information about the inverter
More information"Buyer" or "you" means the person, firm or corporation to whom the order is addressed.
1. Definitions "Australian Consumer Law" means the Australian Consumer Law set out in Schedule 2 to the Competition and Consumer Act 2010 (Cth) as given effect under Part XI of the Competition and Consumer
More informationTERMS AND CONDITIONS OF SUPPLY
TERMS AND CONDITIONS OF SUPPLY 1.0 Interpretation 1.1 In these terms and conditions, these meanings apply unless the contrary intention appears: "Australian Consumer Law" means the Australian Consumer
More informationSANTA CLARA CITY RENEWABLE NET METERING & INTERCONNECTION AGREEMENT
SANTA CLARA CITY RENEWABLE NET METERING & INTERCONNECTION AGREEMENT This Net Metering and Interconnection Agreement ( Agreement ) is made and entered into as of this day of, 2018, by the City of Santa
More informationSGS Galson Laboratories, Inc. Equipment Rental, FreePumpLoan & FreeSamplingBadges (3-in-1) Agreement
SGS Galson Laboratories, Inc. Equipment Rental, FreePumpLoan & FreeSamplingBadges (3-in-1) Agreement This Equipment Rental, FreePumpLoan & FreeSamplingBadges (3-in-1) Agreement (the Agreement ) is entered
More informationCalifornia Independent System Operator Corporation Fifth Replacement Electronic Tariff
Table of Contents 41. Procurement Of RMR Generation... 2 41.1 Procurement Of Reliability Must-Run Generation By The CAISO... 2 41.2 Designation Of Generating Unit As Reliability Must-Run Unit... 2 41.3
More informationINTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS
INTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS PRICE SCHEDULE #101016 EFFECTIVE: OCTOBER 1, 2016 MADE IN BRAZIL, UNLESS NOTED 117 Gulick Street, Blossburg, PA 16912 www.wardmfg.com (800) 248-1027
More informationPVI 60KW, PVI 82KW, PVI 95KW
PVI 60KW PVI 82KW PVI 95KW WARRANTY MANUAL Commercial, Grid-Tied Photovoltaic Inverters 2008, Solectria Renewables LLC Subject to Change DOC-020099 rev 024 1 1 Product Warranty & RMA Policy Warranty Policy
More information7.3L POWERSTROKE BANJO BOLT KIT Fits L Powerstroke Diesel. Installation Guide
7.3L POWERSTROKE BANJO BOLT KIT Fits 94-03 7.3L Powerstroke Diesel Installation Guide INSPECT CONTENTS OF THIS KIT THOROUGHLY BEFORE STARTING THE INSTALLATION PROCESS! IF YOU FIND A PROBLEM WITH YOUR PACKAGE:
More informationTERMS AND CONDITIONS OF PARKING AT PALMERSTON NORTH AIRPORT
TERMS AND CONDITIONS OF PARKING AT PALMERSTON NORTH AIRPORT 14 December 2017 Palmerston North Airport Limited ( PNAL ) provides travellers and other members of the public with multiple car parking options
More informationLondon Hydro Connection Checklist
London Hydro Connection Checklist Applicants should be aware not to incur expenses prior to London Hydro approving the connection of the facility to the grid. Payment of Connection Fee: $1000 plus HST
More informationRig Master Power by Mobile Thermo Systems Inc.
RigMaster Power Dealer Warranty Policy The Limited Warranty This limited warranty applies to the RigMaster Auxiliary Power Unit (RigMaster APU) which consists of the following components: 1. The generator
More informationSOLAR PHOTOVOLTAIC DISTRIBUTED GENERATION CUSTOMER GUIDELINES, APPLICATION & INTERCONNECTION AGREEMENT
SOLAR PHOTOVOLTAIC DISTRIBUTED GENERATION CUSTOMER GUIDELINES, APPLICATION & INTERCONNECTION AGREEMENT INTERCONNECTION AGREEMENT FOR SOLAR PHOTOVOLTAIC DISTRIBUTED GENERATION THIS AGREEMENT MUST ACCOMPANY
More informationDual Phase Extraction Inlet. Patent No Installation Manual. P/N Rev
Patent No. 6520259 Installation Manual P/N 95232 Rev 6-16-11 Table of Contents ing Extraction Inlets track changing water levels to maintain optimum performance 1.Component Identification Page 1 2. How
More informationK877. Fitting Kit. Fitting Instructions for Basic Carrier. x 1 x 1 x 1 x 1. x 2 x 2 x 1 x 1. x 1 x 1. Revision No: 3C 1
Fitting Instructions for Basic Carrier x 1 x 1 x 1 x 1 x 2 x 2 x 1 x 1 x 1 x 1 Revision No: 3C 1 MAX kgs (lbs) W/P WHD Subaru Impreza, 4dr Sedan 12-+ NZ 75 kgs (165 lbs) 75 kgs (165 lbs) Impreza, 4dr Sedan
More informationPVI 1800/PVI Residential/Commercial Grid-Tied Photovoltaic Inverter WARRANTY MANUAL. Subject to Change REV , Solectria Renewables
PVI 1800/PVI 2500 WARRANTY MANUAL Residential/Commercial Grid-Tied Photovoltaic Inverter 2009, Solectria Renewables Subject to Change REV 10.09 1 Product Warranty & RMA Policy 1.1 Warranty Policy The Solectria
More informationTERMS OF USE TERMS AND CONDITIONS. Plumbing and Heating Products (PL-WR)
TERMS OF USE 1. Watts pricing and product data is subject to change without notice and such changes supersede all previous versions. 2. Watts data is to be used as provided. Watts is not responsible for
More informationPRO STEER Block Hydraulic Installation. New Holland TR Series Combine Harvester
PRO STEER Block Hydraulic Installation New Holland TR Series Combine Harvester Part Number A2364 Rev. 4.0 Copyright Topcon Precision Agriculture July, 2008 All contents in this manual are copyrighted by
More informationFREQUENTLY ASKED QUESTION SERIES. BANJO BOLTS WHY THE BAD RAP? 6.0L Powerstroke Diesel. Last Updated: 7/2/2018 Page 1 of 3 S Diesel, LLC
FREQUENTLY ASKED QUESTION SERIES BANJO BOLTS WHY THE BAD RAP? 6.0L Powerstroke Diesel Last Updated: 7/2/2018 Page 1 of 3 S Diesel, LLC Ihave been getting a bunch more comments and questions from customers
More informationDEALER REGISTRATION PACKAGE
DEALER REGISTRATION PACKAGE. Please return this completed paperwork by mail, fax or email: Sunflower Auto Auction P.O. Box 19087 Topeka, Kansas 66619 PHONE 785-862-2900 FAX 785-862-2902 Email:info@SunflowerautoAuction.com
More informationHeber Light & Power Electric Service Rule No. 14 NET METERING SERVICE
Heber Light & Power Electric Service Rule No. 14 NET METERING SERVICE 1. Overview The Company offers Residential and Small General Service Customers net metering service that allows the Customer to use
More informationPublic Access Electric Vehicle Charging Station Rebate Program Agreement
Public Access Electric Vehicle Charging Station Rebate Program Agreement The City of Anaheim (City) is offering rebates to commercial, industrial, institutional, and municipal customers who install Level
More information900 SERIES SPLIT CASE FIRE PUMP REPAIR PARTS INDEX
900 SERIES SPLIT CASE FIRE PUMP REPAIR PARTS INDEX Read and understand the pump and motor instructions before attempting to install, disassemble or repair the pump. Part # AF-03-326 2015 Pentair Ltd. 01/30/15
More informationK131. Fitting Kit. Fitting Instructions for Basic Carrier. x 1 x 4 x 4 x 2. x 2 x 4. Revision No: 2C 1
Fitting Instructions for Basic Carrier x 1 x 4 x 4 x 2 x 2 x 4 Revision No: 2C 1 MAX kgs (lbs) W/P WHD Toyota Estima, 5dr MPV 00-Apr 06 NZ 50 kgs (110 lbs) 50 kgs (110 lbs) Estima, 5dr MPV 00-Apr 06 NZ
More informationINDUSTRIAL HAUL AGREEMENT
INDUSTRIAL HAUL AGREEMENT PUBLIC WORKS MEMORANDUM OF AGREEMENT entered into this day of, A.D., 20(yr). BETWEEN: PARKLAND COUNTY a County incorporated under the laws of the Province of Alberta, (hereinafter
More informationK681. Fitting Kit. Fitting Instructions for Basic Carrier. x 4 x 2 x 2 x 2. x 2. Revision No: 4D 1
Fitting Kit Fitting Instructions for Basic Carrier x 4 x 2 x 2 x 2 x 2 Revision No: 4D 1 MAX kgs (lbs) W/P WHD Mitsubishi Mirage Space Star, 5dr Hatch 13-15 CN 75 kgs (165 lbs) 75 kgs (165 lbs) Mirage,
More informationKAUAI ISLAND UTILITY COOPERATIVE KIUC Tariff No. 1 RULE NO. 17 NET ENERGY METERING
Third Revised Sheet 55a Cancels Second Revised Sheet 55a A. ELIGIBLE CUSTOMER-GENERATOR RULE NO. 17 NET ENERGY METERING Net energy metering is available to eligible customer-generators, defined as, permanent
More informationVertabelo Academy. Terms of Service PLEASE READ ALL OF THE FOLLOWING TERMS OF SERVICE BEFORE USING THIS WEBSITE A. General Terms
Vertabelo Academy Terms of Service PLEASE READ ALL OF THE FOLLOWING TERMS OF SERVICE BEFORE USING THIS WEBSITE A. General Terms 1. These Terms of Service ("ToS") govern users access to and use of the Vertabelo
More informationDealer Registration. Please provide the following:
Dealer Registration Please provide the following: A copy of your Dealer s License A copy of your Sales Tax Certificate A copy of the Driver s License for all representatives A copy of your Master Tag Receipt
More informationRing Mount Floodgates
Ring Mount Floodgates 100-900 2 x 600 ring mount, Coombabah Creek, Gold Coast FLOODGATE DIMENSION CHART (RING MOUNT) 100-900 NB RC/VC PIPE PVC PIPE DI PIPE FRC PIPE HEAD TO OPEN A B C A B C A B C A B C
More informationK708. Fitting Kit. Fitting Instructions for Basic Carrier. x 2 x 2 x 4 x 4. x 4. Revision No: 1A 1
Fitting Kit Fitting Instructions for Basic Carrier x 2 x 2 x 4 x 4 x 4 Revision No: 1A 1 MAX kgs (lbs) W/P WHD Skoda Octavia III, 5dr Liftback 09-12 NZ 35 kgs (77 lbs) 35 kgs (77 lbs) Octavia, 5dr Hatch
More informationK381W. Fitting Kit. Fitting Instructions for Basic Carrier. x 2 x 2 x 2 x 2. x 4. Revision No: 4C 1
Fitting Kit Fitting Instructions for Basic Carrier x 2 x 2 x 2 x 2 x 4 Revision No: 4C 1 MAX kgs (lbs) W/P WHD Skoda Octavia II, 4dr Liftback 04-09 NZ 75 kgs (165 lbs) 75 kgs (165 lbs) Octavia II, 4dr
More informationFemale Plug. connecting to Fuel Quantity
**Ag Diesel Solutions recommends replacing the Transorb/Suppressor Diode before the installation of this module*** Red wire = 12V Constant power. Male Plug connecting to Fuel Quantity Valve Black wire
More informationREVISED 8/1/2018 SOLAR PHOTOVOLTAIC DISTRIBUTED GENERATION CUSTOMER GUIDELINES, APPLICATION & WGC INTERCONNECTION AGREEMENT
REVISED 8/1/2018 SOLAR PHOTOVOLTAIC DISTRIBUTED GENERATION CUSTOMER GUIDELINES, APPLICATION & WGC INTERCONNECTION AGREEMENT INTRODUCTION Lathrop Irrigation District has created a policy to allow safe connection
More informationK440. Fitting Kit. Fitting Instructions for Basic Carrier. x 4 x 4 x 4 x 4. x 1 x 1 x 4 x 1. Revision No: 10J 1
Fitting Kit Fitting Instructions for Basic Carrier x 4 x 4 x 4 x 4 x 1 x 1 x 4 x 1 Revision No: 10J 1 MAX kgs (lbs) W/P WHD Volkswagen Caddy Maxi, 5dr Van 08-14 ZA 75 kgs (165 lbs) 100 kgs (220 lbs) Caddy
More informationMetroPrime 22MPC Self-Priming Centrifugal Pump
Page 1 of 6 prevent priming or reduce pump capacity. OPERATION The 22 MPC-Metropolitan Pump is a self-priming centrifugal pump and only requires priming prior to its initial start. The pump will retain
More informationSTC E-Series Electrically Actuated Ball Valves 316 Stainless Steel, 2-Way or 3-Way
STC E-Series Electrically Actuated Ball Valves 316 Stainless Steel, 2-Way or 3-Way Ordering Part No. = (e.g., E 1/2-3-S) Indicator / Control E 1/2 - - - 3-S Model Name Electric Actuated Valves E Port Size
More informationK309. Fitting Kit. Fitting Instructions for Basic Carrier. x 1 x 2 x 2 x 4. x 1 x 2 x 1. Revision No: 7C 1
Fitting Instructions for Basic Carrier x 1 x 2 x 2 x 4 x 1 x 2 x 1 Revision No: 7C 1 MAX kgs (lbs) W/P WHD Toyota Emina Lucida, 4dr MPV 92-99 EU 75 kgs (165 lbs) 75 kgs (165 lbs) Emina Lucida, 4dr MPV
More informationK163. Fitting Kit. Fitting Instructions for Basic Carrier. x 4. Revision No: 2C 1
Fitting Kit Fitting Instructions for Basic Carrier x 4 Revision No: 2C 1 Nissan MAX kgs (lbs) W/P WHD Elgrande, 4dr MPV 97-02 NZ 50 kgs (110 lbs) 50 kgs (110 lbs) Elgrande, 4dr MPV 97-02 AU 50 kgs (110
More informationDCLI GENSET INTERCHANGE AGREEMENT
DCLI GENSET INTERCHANGE AGREEMENT THIS GENSET INTERCHANGE AGREEMENT (this Agreement ), dated, is by and between Direct ChassisLink, Inc. ( DCLI ) and ( Motor Carrier ). 1. Scope of Agreement. DCLI hereby
More informationBYD B-Box Limited Warranty Letter
BYD B-Box Limited Warranty Letter Applicable Country: Australia Effective date: 01 st, Jul., 2017 BYD B-Box System Applicable product types: B-Box H 6.4 / B-Box H 7.7 / B-Box H 9.0 / B-Box H 10.2 / B-Box
More informationSTC 2L Series Solenoid Valves
STC 2L170-500 Series Solenoid Valves 2L170-500 Series Solenoid Valve Specifications Valve Model 2L170-3/8 2L170-1/2 2L170-3/4 2L200-1 2L300-1 1/2 2L500-2 Valve Type Action 2 Way, Normally Closed (NC) Pilot
More informationGC-1. Roof and Gutter De-Icing Control Installation and Operating Instructions FOR EXTERIOR INSTALLATION ONLY
GC-1 Roof and Gutter De-Icing Control Installation and Operating Instructions FOR EXTERIOR INSTALLATION ONLY GENERAL INFORMATION The GC-1 heating cable controller has been designed and manufactured for
More information10 Year Limited Warranty
Power. On Your Terms. 10 Year Limited Warranty PHI 2.7 TM PHI 3.5 TM 60A SIMPLIPHI POWER, INC. REV020618 10 Year Limited Warranty: PHI 2.7 TM PHI 3.5 TM 60A 24V 48V Limited Pro-Rated Warranty Coverage
More informationOPERATION MANUAL Variable Speed Pump Controller Dated: 06/04/2013 Pump Down Application. Document No.: LMSII_V100_OM Page 1 of 8 Model-V100 LMS II
Document No.: LMSII_V100_OM Page 1 of 8 LMS II Document No.: LMSII_V100_OM Page 2 of 8 1. Operation: When the wet well level rises above the on level set point, the lead pump will start after an adjustable
More informationPART NUMBER: F-706RLSS REVOLUTION LIFT: SLING-SEAT OPTION
PART NUMBER: F-706RLSS REVOLUTION LIFT: SLING-SEAT OPTION 500 LB. [227 kg] MAXIMUM CAPACITY MANDATORY LEAVE THIS MANUAL WITH LIFT OWNER - WARNING- IMPORTANT SAFETY INSTRUCTIONS 1. READ AND FOLLOW ALL INSTRUCTIONS.
More informationAir Chain Hoist. Follow all instructions and warnings for. Capacities. 250 lbs (113 kg) 300 lbs (136 kg) 500 lbs (226 kg) 600 lbs (272 kg)
Air Chain Hoist Operating, Maintenance & Parts Manual Follow all instructions and warnings for inspecting, maintaining and operating this hoist. The use of any hoist presents some risk of personal injury
More information20250 Module Installation Guide
20250 Module Installation Guide 2013.5-2017 RAM 6.7L Cummins Up to 90HP Gain 1-3 MPG Fuel Savings AgDieselSolutions.com Adjustable switch connector Power +12 volts (Red wire) & Ground (Black wire) Injector
More informationK682. Fitting Kit. Fitting Instructions for Basic Carrier. x 4 x 4 x 4 x 8. x 4 x 2 x 2 x 4. x 4 x 4 x 4. Revision No: 1A 1
Fitting Instructions for Basic Carrier x 4 x 4 x 4 x 8 x 4 x 2 x 2 x 4 x 4 x 4 x 4 Revision No: 1A 1 MAX kgs (lbs) W/P WHD Holden Colorado 7, 5dr SUV 13-+ NZ 75 kgs (165 lbs) 100 kgs (220 lbs) Colorado
More informationApplication for Operation of & Net Metering for Member-Owned Generation Name: Mailing Address: City: County: State: Zip Code: _
Application for Operation of & Net Metering for Member-Owned Generation -------------- OWNER/APPLICANT INFORMATION Name: Mailing Address: City: County: State: Zip Code: _ Phone Number: Email Address:.Representative:
More informationK500. Fitting Kit. Fitting Instructions for Basic Carrier. x 1 x 4 x 4 x 4. Revision No: 14N 1
Fitting Kit Fitting Instructions for Basic Carrier x 1 x 4 x 4 x 4 Revision No: 14N 1 MAX kgs (lbs) W/P WHD Mazda 5, 5dr MPV 06-10 EU 75 kgs (165 lbs) 75 kgs (165 lbs) 5, 5dr MPV 06-10 US 75 kgs (165 lbs)
More informationHydraulic Fittings. Design, Manufacture, Distribution
Hydraulic Fittings Design, Manufacture, Distribution Hydraulic Fittings are exclusively distributed by Beaumanor Engineering Ltd of Leicester and manufactured by Balu Auto Components of Chennai India,
More informationVERTICAL AND HORIZONTAL SPLIT CASE FIRE PUMPS
480 MODELS VERTICAL AND HORIZONTAL SPLIT CASE FIRE PUMPS REPAIR PARTS INDEX NOTE! Read and understand the pump and driver instructions before attempting to install, disassemble or repair the pump. Part
More informationDAP-625S and DAP-875S
AIR CHAMP PRODUCTS DAP-625S and DAP-875S (i) FORM NO. L-20078-B-0501 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject
More informationENTERTAINMENT. BGV-D8+ Supplement to Manual # Tonne to 1.3 Tonne 250 kg to 1300 kg (REV. AA) E627NH
ENTERTAINMENT BGV-D8+ Supplement to Manual #00000999.25 Tonne to 1.3 Tonne 250 kg to 1300 kg Columbus McKinnon Corporation CM Entertainment 140 John James Audubon Parkway Amherst, New York 14228-1197 1-800-888-0985
More informationCardinal DETECTO. PORTABLE PLATFORM SCALES Digital Type Series 850F Owner s Manual
Cardinal DETECTO PORTABLE PLATFORM SCALES Digital Type Series 850F Owner s Manual CARDINAL SCALE MFG. CO. PO BOX 151, WEBB CITY, MO 64870 0066-M176-O1 Rev H 10/06 417-673-4631 www.cardinalscale.com Printed
More informationK1013 K1013. Fitting Instructions for Basic Carrier. x 4 x 4 x 1 x 8. x 4 x 1 x 4 x 1. x 4 x 1 x 1 x 2. Revision No: 1A 1
Fitting Instructions for Basic Carrier x 4 x 4 x 1 x 8 x 4 x 1 x 4 x 1 x 4 x 1 x 1 x 2 Revision No: 1A 1 MAX kgs (lbs) W/P WHD Holden Spark, 5dr Hatch 16-+ AU 50 kgs (110 lbs) 50 kgs (110 lbs) Spark, 5dr
More information3V SERIES SOLENOID VALVE
3V110-410 SERIES SOLENOID VALVE Valve Model 3V110-1/8 3V210-1/4 3V310-3/8 3V410-1/2 Port & Mounting Action & Motion Operating Pressure Body Ported Air Pilot, Spool Design, Response Time
More informationOWNERS MANUAL JANUARY 2007 ISO
Manufacturer of Dimensions TM Inverters 4467 White Bear Parkway St. Paul, MN 55110 Phone: 651-653-7000 Fax: 651-653-7600 E-mail: inverterinfo@sensata.com Web: www.dimensions.sensata.com 121231B OWNERS
More informationK683. Fitting Kit. Fitting Instructions for Basic Carrier. x 4 x 4 x 8 x 2. x 2 x 4 x 4 x 4. x 4. Revision No: 3C 1
Fitting Kit Fitting Instructions for Basic Carrier x 4 x 4 x 8 x 2 x 2 x 4 x 4 x 4 x 4 Revision No: 3C 1 MAX kgs (lbs) W/P WHD Mitsubishi Outlander GX3, 5dr SUV 13-15 CN 75 kgs (165 lbs) 75 kgs (165 lbs)
More informationTONS. Before each shift: Before operating: Before initial operation of hoist:
LEVER HOIST 0.25 9 TONS Manual Notice It is the responsibility of the owner/user to install, inspect, test, maintain, and operate these lever hoists in accordance with ASME B30.21, Safety Standard for
More informationINTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS
INTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS PRICE SCHEDULE #100217 EFFECTIVE: FEBRUARY 6, 2017 REV. 1 MADE IN BRAZIL, UNLESS NOTED 117 Gulick Street, Blossburg, PA 16912 (800) 248-1027 Sheet #100217,
More informationOWNERS MANUAL JANUARY 2007 ISO
Manufacturer of Dimensions TM Inverters 4467 White Bear Parkway St. Paul, MN 55110 Phone: 651-653-7000 Fax: 651-653-7600 E-mail: inverterinfo@sensata.com Web: www.dimensions.sensata.com OWNERS MANUAL JANUARY
More informationMontana-Dakota Utilities Co. A Division of MDU Resources Group, Inc. 400 N 4 th Street Bismarck, ND 58501
Original Sheet No. 72 Page 1 of 7 AVAILABILITY: Available to any customer that owns and operates a solar, wind or hydroelectric generating facility with a capacity of not more than 25 Kw that is located
More informationq u i e t price list march 2018
q u i e t price list march 201 quiet terms and conditions Sales and Service Policy uidelines detailing the operating policies and procedures of Bernhardt Design are provided in the Sales and Service Policy
More informationBC Brake Caliper. (i) MEX (55) QRO (442) MTY (81) DIST. AUTORIZADO
MEX (55) 5 6 QRO (44) 95 7 60 MTY () 54 0 BC Brake Caliper (i) FORM NO. L-0066-B-040 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this
More informationS8JX-N/S8JX-G Series Replacement Brackets
Original model mounting method Bottom mounting Front mounting Side mounting Original model: S8JX-N/S8JX-G Replacement model: S8FS-G Replacement bracket Model scheduled to be discontinued Recommended replacement
More informationParts List 885 Series
Parts List Effective: October 15, 2001 Supersedes: P410-885 Dated September 2000 WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN
More informationStormPro BCV400 Sewage Ejector Pump
Page 1 of 8 Marks & Meanings DANGER: Keep the pump equipment out of the reach of children! Warns that the failure to follow the directions given could cause serious risk to individuals or objects. WARNING:
More informationTelhio Credit Union Account to Account (A2A) Transfer Service User Agreement
Telhio Credit Union Account to Account (A2A) Transfer Service User Agreement IMPORTANT: TO ENROLL IN THE A2A TRANSFER SERVICE YOU MUST CONSENT TO RECEIVE NOTICES AND INFORMATION ABOUT THE SERVICE ELECTRONICALLY.
More informationQ20. Track System. Fitting Instructions for Basic Carrier. x 2 x 2 x 2 x 1. x 1 x 1 x 4 x 4. Revision No: 1A 1
Track System Fitting Instructions for Basic Carrier x 2 x 2 x 2 x 1 x 1 x 1 x 4 x 4 Revision No: 1A 1 x 4 x 1 x 20 x 20 x 20 2 First Time Installation Remove parts from inside the package and check. Contact
More informationIon Technologies SHR-HR Submersible Sewage Pump Single Seal, Single Phase, & Three Phase Power
Page 1 of 8 equipment and follow handling procedures per OSHA 29 CFR 1910.1030 when handling equipment after waste water source has been connected to system. WARNING: Risk of Asphyxiation. Installer(s)
More informationSTEEL PIPE NIPPLES - WELDED Price Sheet PNW-7.18 Effective: July 16, 2018 Cancels Price Sheet PNW-3.18 of March 5, 2018
STEEL PIPE NIPPLES - WELDED Price Sheet PNW-7.18 Effective: July 16, 2018 Cancels Price Sheet PNW-3.18 of March 5, 2018 FOR THE MOST CURRENT PRODUCT/PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT
More informationSTC 2W Series Solenoid Valves
STC 2W160-500 Series Solenoid Valves 2W160-500 Series Solenoid Valve Specifications Valve Model 2W160-3/8 2W160-1/2 2W200-3/4 2W250-1 2W350-1 1/4 2W400-1 1/2 2W500-2 Valve Type Action 2 Way, Normally Closed
More information4V130P-430P SERIES AIR PILOT VALVE
4V130P-430P SERIES AIR PILOT VALVE Valve Model 4V130P-1/8 4V230P-1/4 4V330P-3/8 4V430P-1/2 Port & Mounting Action & Motion Operating Pressure Body Ported Double Solenoid, Spool Design, 3 Position, Pressure
More informationSTC 2DS Series Anti-Hammering Slow Closing Pilot Solenoid Valves
STC 2DS500-2000 Series Anti-Hammering Slow Closing Pilot Solenoid Valves 2DS500-2000 Series Solenoid Valve Specifications Valve Model 2DS400F 2DS500F 2DS650F 2DS800F 2DS1000F 2DS1250F 2DS1500F 2DS2000F
More informationTOWNSHIP OF RARITAN COUNTY OF HUNTERDON, NEW JERSEY ORDINANCE #16-06 REVISED
TOWNSHIP OF RARITAN COUNTY OF HUNTERDON, NEW JERSEY ORDINANCE #16-06 REVISED AN ORDINANCE AMENDING CHAPTER 2.56 ENTITLED POLICE DEPARTMENT OF TITLE 2 ENTITLED ADMINISTRATION AND PERSONNEL OF THE REVISED
More informationDC to AC Power Inverters
Manufacturer of Dimensions TM Inverters 4467 White Bear Parkway St. Paul, MN 55110 Phone: 651-653-7000 Fax: 651-653-7600 E-mail: inverterinfo@sensata.com Web: www.dimensions.sensata.com ISO 9001:2000 Certified
More information650mA Phase Dimmable LED Driver
Installation Guide DGLC650C18PD PATENT PENDING REGISTERED DESIGN Designed in Australia to meet Australian Standards and installation conditions DIGINET.NET.AU Diginet Control Systems Pty Ltd ABN 89 095
More information6A-1773 Q ISO-2944
6A-1773 Q1-2801 ISO-2944 Lowery Well Heads, Inc. Quality is #1 We are happy to announce that as of 9-11-15 we are now API Q1 and ISO 9001 certified. Lowery Well Heads, Inc. is committed to its customer
More informationStormPro BA Series Sump Pump
Page 1 of 8 Marks & Meanings DANGER: Keep the pump equipment out of the reach of children! Warns that the failure to follow the directions given could cause serious risk to individuals or objects. WARNING:
More information30100 Module Installation Guide L
30100 Module Installation Guide 1997-2006 12.0L Mack Engines Up to 30% HP Gain 10-20% Fuel Savings AgDieselSolutions.com 1997-2006 Mack 12.0L Engine Module +12 volts red wire. Ground black wire Injector
More informationBRITISH COLUMBIA USED OIL MANAGEMENT ASSOCIATION
BRITISH COLUMBIA USED OIL MANAGEMENT ASSOCIATION PROGRAM MANUAL RETURN COLLECTION FACILITY (RCF) OPERATORS January 2017 Page 1 1 DEFINITIONS 1.1 Antifreeze means all automotive antifreeze. 1.2 Antifreeze
More informationColumbia Water & Light Interconnection & Net Metering Agreement Electrical Facility
Processed Date Columbia Water & Light Interconnection & Net Metering Agreement Electrical Facility Customer s Printed Name Installation Street Address Account Number Please note: Columbia Water & Light
More informationCHOCTAWHATCHEE ELECTRIC COOPERATIVE, INC RESIDENTIAL SERVICE--NET METERING RIDER
RS-N SECOND REVISED SHEET NO. 8.2.1 CANCELLING FIRST SHEET NO. 8.2.1 NAME OF UTILITY CHOCTAWHATCHEE ELECTRIC COOPERATIVE, INC RESIDENTIAL SERVICE--NET METERING RIDER DEFINITION Net Metering means calculating
More informationBY AND BETWEEN AND. The Franchisor and Franchisee are hereinafter collectively referred to as Parties and individually referred to as Party.
FRANCHISE AGREEMENT This Franchise Agreement is accepted on today. BY AND BETWEEN Afflatus Creative Solutions Private Limited, a private limited company, incorporated under the Indian Companies Act, 2013,
More informationPVC Gasketed Fittings for PVC IPS Pressure Pipe ENGINEERED FOR DURABILITY
For the most up-to-date version of this price list, EFFECTIVE MARCH 4, 2019 ENGINEERED FOR DURABILITY HARRINGTON CORPORATION P.O. BOX 10335 LYNCHBURG, VIRGINIA 24506-0335 For the most up-to-date version
More informationMercedes MBE 906/ L & 7.2L Engine Module. Part # Installation Instructions
1999-2006 Mercedes MBE 906/926 6.4L & 7.2L Engine Module Part # 15000 Installation Instructions 15000_revC 1999-2006 Mercedes 6.4L & 7.2L Engine Module +12 volts red wire. Ground black wire Injector Terminals
More informationGWC Valve International
GWC Valve International PROVEN TECHNOLOGY FOR INDIVIDUAL VALVE SOLUTIONS WORLDWIDE API 6D SWING CHECK VALVES Pressure Class: ASME 150-2500 Size Range: 2-36 CATALOG NUMBER SC-1001 G W C V A L V E I N T
More informationOwner s Manual. Features
Owner s Manual Pumptec is a microcomputer based pump protection device that continuously monitors motor load and power line conditions to provide protection against dry well conditions, waterlogged tanks,
More informationSOARER TT BLOW-OFF VALVE ADAPTOR INSTRUCTIONS
IMPORTANT NOTES ON FITTING YOUR BOV SOARER TWIN TURBO ADAPTOR Turbosmart recommends that your Blow Off Valve (BOV) and Adaptor kit is fitted by an appropriately qualified technician. ADAPTOR KIT CONTENTS
More information1. In these Terms and Conditions and unless the context otherwise requires:
DEFINITIONS 1. In these Terms and Conditions and unless the context otherwise requires: 1.1 Account Holder means the Principal Cardmember or Corporate Cardmember in whose name a Card Account has been opened
More informationDimensions 12/800N 12/1200N D. DC to AC Power Inverters. OWNERS MANUAL for Models: OWNERS MANUAL April ISO 9001:2000 Certified Company
Manufacturer of Dimensions Inverters 4467 White Bear Parkway St. Paul, MN 55110 Phone: 651-653-7000 Fax: 651-653-7600 E-mail: inverterinfo@sensata.com Web: www.dimensions.sensata.com OWNERS MANUAL April
More informationMotorized Control Valves
Motorized Control Valves Gland Connector Sold as Option. See page XX. Reference coil option chart for additional electrical coil offerings. AC control systems industrial boilers water and purification
More information60 PSI Boost Gauge. For Product Numbers: MT-DV01_60, MT-WDV01_60
60 PSI Boost Gauge For Product Numbers: MT-DV01_60, MT-WDV01_60 Red: 12v Constant (un-switched) Source (+) Orange: 12v Dimmer (switched) Source (+) (optional) White: 12v Ignition (switched) Source (+)
More informationModel C230 Pump Controller
MANUAL Model C230 Earthsafe Systems, Inc. 7553 S. Madison Willowbrook, IL 60527 T: (630) 794-5100 F: (630) 794-5106 info@earthsafe.com www.earthsafe.com March 1, 2010 The information contained herein is
More informationSingle-Position Detent Clutch DC Series. (i) MTY (81) MEX (55) QRO (442)
Single-Position Detent Clutch DC Series (i) FORM NO. L-2017-A-001 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject
More informationLevel Alert Model Multi-Switch Liquid Level Sensor. Assembly and Installation Instructions
Level Alert Model 2000 Multi-Switch Liquid Level Sensor Assembly and Installation Instructions Kit Form Each unit is provided in kit form with step-by-step instructions, making it extremely easy to custom
More informationADI-125/750 ADI-125/1500 ADI-125/2500
Manufacturer of Dimensions TM Inverters 4467 White Bear Parkway St. Paul, MN 55110 Phone: 651-653-7000 Fax: 651-653-7600 E-mail: inverterinfo@sensata.com Web: www.dimensions.sensata.com 121094B OWNERS
More information