CERTIFICATE. Continental Automotive Group. with the organizational units/sites as listed in the annex

CERTIFICATE. Continental Automotive Group

CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Environmental Management System. : Engineering, Manufacturing and Sales of

CERTIFICATE. Through an audit, documented in a report, it was verified that the management system fulfills the requirements of the following standard:

CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Energy Management System. : parts, strainers, cylinderhead- and oil pan semi

Facts & Figures Powertrain

Facts & Figures 2018 Powertrain 2 Powertrain Division 3 Powertrain. Energy for Your Drive. Safe, eco-friendly driving with your own vehicle arrive relaxed at your destination. Few things fascinate people

CERTIFICATE. with the organizational units/sites as listed in the annex

CERTIFICATE This is to certify that DURA Holding GmbH with the organizational units/sites as listed in the annex has implemented and maintains an Energy Management System. Scope: Design, Development, Engineering,

CERTIFICATE. Freudenberg Sealing Technologies GmbH & Co. KG. with the organizational units/sites as listed in the annex

CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Occupational Health and Safety Management System. : Development, production

CERTIFICATE. WIKA Alexander Wiegand SE & Co. KG. with the organizational units/sites as listed in the annex

CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System. : Development, production, calibration and sale

CERTIFICATE. Dura Automotive Systems Group. with the organizational units/sites as listed in the annex

CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Energy Management System. : Design, development, engineering, marketing,

CERTIFICATE. Dura Automotive Systems Group. with the organizational units/sites as listed in the annex

CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Environmental Management System. : Design, Development, Engineering, Marketing,

CERTIFICATE. with the organizational units/sites as listed in the annex. has implemented and maintains a Quality and Environmental Management System.

CERTIFICATE This is to certify that Kennedyplatz 1 with the organizational units/sites as listed in the annex has implemented and maintains a Quality and Environmental Management System. Scope: General

GERTIFICATE. tl.,(" tru(,h. ISO 9001 i 2015 LENZE SE. ( DAKKS Deutsche Akkreditierungsstelle D-ZM t5. DQS GmbH. This is to certify that

GERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System : Design, production, sales and service of electronic

CERTIFICATE. IQNet and DQS GmbH Deutsche Gesellschaft zur Zertifizierung von Managementsystemen hereby certify that the company

CERTIFICATE IQNet and DQS GmbH Deutsche Gesellschaft zur Zertifizierung von Managementsystemen hereby certify that the company with the organizational units/sites as listed in the annex has implemented

CERTIFICATE. Webasto Roof & Components SE Kraillinger Straße Stockdorf, Germany

CERTIFICATE The Certification Body of TÜV SÜD Management Service GmbH certifies that Kraillinger Straße 5 82131 Stockdorf, Friedrichshafener Straße 9 82205 Gilching, including the sites and scope of application

Predictive Energy Management on Powertrain

Bitte decken Sie die schraffierte Fläche mit einem Bild ab. Please cover the shaded area with a picture. (24,4 x 7,6 cm) Predictive Energy Management on Powertrain Thomas Knorr, Energy Saxony Summit, September

CERTIFICATE. WIKA Alexander Wiegand SE & Co. KG. with the organizational units/sites as listed in the annex

CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System. : Development, production, calibration and sale

CERTIFICATE. DQS Holding GmbH has issued an IQNet recognized certificate that the organization. ebm-papst Mulfingen GmbH & Co. KG

CERTIFICATE DQS Holding GmbH has issued an IQNet recognized certificate that the organization with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management

CERTIFICATE. with the organizational units/sites as listed in the annex. Scope: Development, Production and Marketing & Sales of Specialty Chemicals

CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Energy Management System. Scope: Development, Production and Marketing &

CERTIFICATE. ElringKlinger AG

CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Environmental Management System. : Development and manufacturing of gaskets,

CERTIFICATE. LEDVANCE GmbH Business Campus Garching Parkring Garching Germany ISO 14001:2015

CERTIFICATE The Certification Body of TÜV SÜD Management Service GmbH certifies that Business Campus Garching Parkring 29-33 85748 Garching including the sites and scope of application see enclosure has

(~k~~!~~:e'"ngsstelle

~ (~k~~!~~:e'"ngsstelle Deutsche GmbH German Accreditation Body Entrusted according to Section 8 subsection1 AkkStelleG in connection with Section 1 subsection 1 AkkStelleGBV Signatory to the Multilateral

CERTIFICATE. Siemens AG Siemens Certification Authority. has implemented the specification listed below for the following certification services.

CERTIFICATE This is to certify that Werner-von-Siemens-Straße 1 80333 München has implemented the specification listed below for the following certification services. Scope: / Trust Service Provider (TSP)

DOUBLE OCTOMILL TM PRODUCT RANGE

DOUBLE OCTOMILL TM PRODUCT RANGE Double Octomill insert selection and cutting data recommendations, see page 6. complete insert programme, see page 7. Tool angles: Jo = -11q Jp = - 8q Jf = - 8q Pitch

-Shape the Future with Manufacturing Technology

-Shape the Future with Manufacturing Technology GmbH & Co. KG Wilhelm-Harting-Straße 1 D-32339 Espelkamp Tel. 05772/47-97500 Fax 05772/47-537 Internet: www.--.com E-Mail:.applied@.com P. 1 / 18 in Germany

Are you auto-motivated? Welcome!

Are you auto-motivated? Welcome! Last updated: 18.11.2011 Scholarship Program HR Presentation www.romania.careers-continental.com Continental Corporation 194 Production and R&D Locations in 38 Countries

Company presentation Continental Automotive Systems Sibiu 2014

Bitte decken Sie die schraffierte Fläche mit einem Bild ab. Please cover the shaded area with a picture. (24,4 x 18,0 cm) Company presentation 2014 www.continental-corporation.com Agenda 1. Continental

BPW AFTERMARKET GROUP

BPW AFTERMARKET GROUP PARTNER FOR YOUR TOUGH BUSINESS. HOW DO YOU RECOGNISE A GOOD DEALER? HE KNOWS WHAT YOU REALLY NEED. The BPW Aftermarket Group: tailored to the needs of your business. Successful workshops

ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO

P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min

INSTALLATION GUIDE. Safe Parking. Innovative Vehicle Solutions

INSTALLATION GUIDE Safe Parking Innovative Vehicle Solutions TEM Safe Parking Installation Table of contents Use 3 Method of Operation 3 Fitting guidelines 4 Maintenance 4 Technical data 5 Versions 5 Check

SIMPLY SAFE GCE Safety Campaign

SIMPLY SAFE GCE Safety Campaign SECURITY IN ACTION GCE PROVEN QUALITY FOR BEST SAFETY PERFORMANCE GCE Group is one of the world s leading producers of equipment for oxygen/ fuel cutting and welding processes.

PREVIEW. Fieldbus System for Distributed I/O NEW PRODUCTS

NEW PRODUCTS PREVIEW Fieldbus System for Distributed I/O! Dual Port EtherNet/IP TM Gateway controls up to 8 Valve Manifolds and 8 Input blocks Controls up to 128 Inputs and 128 Outputs Supports QuickConnect

STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS

STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions

replacement parts 6.1 General 6.2 Ordering

6.0 Replacement Parts 6.1 General Always provide the serial number of the unit on which the parts will be used. The serial number is stamped on the unit nameplate. 6.2 Ordering To ensure proper operation,

STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS

STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions and services.

Installation instructions

www.somfy.com Sonesse 0 DCT Installation instructions Ref :505080A Please read installation instructions and programming instructions completely prior to proceeding with installation and programming. Failure

ESAB Welding & Cutting Products Attn: Customer Service Dept. P.O. Box , 411 S. Ebenezer Road Florence, SC

6.0 General Replacement Parts are illustrated on the following figures. When ordering replacement parts, order by part number and part name, as illustrated on the figure. Always provide the series or serial

BREXIT AND THE AUTO INDUSTRY: FACTS AND FIGURES

BREXIT AND THE AUTO INDUSTRY: FACTS AND FIGURES GLOBAL TRADE European Union EU vehicle imports: Total value: 45,693 million Quantity: 3,395,419 units EU vehicle exports: Total value: 135,398 million Quantity:

Facts and figures INTEGRALPICKER V.

Facts and figures INTEGRALPICKER V www.arburg.com INTEGRALPICKER V Technical data Stroke, X-axis F Stroke, Y axis Clamping surface fixed mould platen A H K D C B 135 G P Ejection chute B-axis M N L 2 Technical

BREXIT AND THE AUTO INDUSTRY: FACTS AND FIGURES

BREXIT AND THE AUTO INDUSTRY: FACTS AND FIGURES GLOBAL TRADE European Union EU vehicle imports: Total value: 48,019 million Quantity: 3,640,975 units EU vehicle exports: Total value: 138,536 million Quantity:

Effects of E-Mobility on Urban Transport in Europe A View from Industry

Effects of E-Mobility on Urban Transport in Europe A View from Industry 3/23/11 Josef Affenzeller AVL List GmbH Wien 23. März 2011 Contents Social Challenges / Boundary Conditions Why AVL is active Joint

WORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018

QUARTERS 2017-2018 June 14, 2018 CONTENTS BASEPROTOTAL BASEPROCARS BASEPROLCV BASEPROHCV BASEPROBC Summation of cars, LCVs, HCVs, heavy buses Cars LCVs HCVs Heavy buses Note: The production of cars and

PARTS/CROSS-REFERENCE INFORMATION

PARTS/CROSS-REFERENCE INFORMATION AA1 and S-ABA Brake Adjusters Innovative Vehicle Solutions Important Notice The products described within this literature, including without limitation, product features,

Butterfly and Knife Gates Valves Made for your Application

Butterfly and Knife Gates Valves Made for your Application Seit mehr als 40 Jahren die Spezialisten rund um die Klappe Butterfly Valve Experts since more than 40 years Traditionelle Schieberqualität aus

Vacuum Potting. Product Information EN Entry-Level Systems. Large Vacuum Chambers. Metering and Dispensing Technology

Product Information EN 05 17 (The page references refer to the general catalogue.) Entry-Level Systems Large Vacuum Chambers Metering and Dispensing Technology 74 75 Systems Our Entry-Level Systems Introducing

Certificate. Standard ISO 9001:2015. Certificate Registr. No /07. Wuppermann Austria GmbH Gußstahlwerkstr Judenburg Austria

Certificate /07 Certificate Holder: Wuppermann GmbH Gußstahlwerkstr. 23 8750 Judenburg Scope: Development, production and sales of pickled, galvanised hot-rolled strip (slitted), cold-rerolled, pickled

The World s Most Specified and Trusted Automatic Brake Adjuster

The World s Most Specified and Trusted Automatic Brake Adjuster Automatic Brake Adjusters Innovative Vehicle Solutions Automatic Brake Adjusters Haldex ABAs are designed and built better than any other

Pumps and Flow Measurement for the Polyurethanes Industry

Pumps and Flow Measurement for the Polyurethanes Industry 2 Pumps and flow measurement for the polyurethanes industry Content 3 Company 5 Gear Pumps for the Polyurethanes Industry 6 Pressure Relief Valves

Global Medium & Heavy Commercial Vehicle Model Level Production Forecast Report. From 2001 to 2021

Global Medium & Heavy Commercial Vehicle Model Level Production Forecast Report From 2001 to 2021 Global CV Markets Covered Industry Production Data Truck & Bus Model Production Forecast Engine Production

About LM Lift Material GmbH, Germany

About LM Lift Material GmbH, Germany Who we are Sematic Group is a leading supplier in the world of elevator components. Our activities include the production and distribution of standard and special automatic

Knorr-Bremse Z-300 Condition Based Maintenance. Applications For Retrofit to All Passenger Rail Vehicles

Efficient. Technology. Efficient. Technology. Worldwide. Worldwide. Knorr-Bremse Z-300 Condition Based Maintenance Applications For Retrofit to All Passenger Rail Vehicles Efficient. Technology. Efficient.

1. General company data

Self disclosure 1. General company data 1.1. Company address Company: Address: Zip-Code: City: Country: Telephone: Fax: Email: Internet: Established: Affiliation: Ownership: Legal form: CC Reg no: VAT:

Session 5: CORSIA Calculation of Offsetting Requirements

ICAO Regional Seminar on CORSIA Session 5: CORSIA Calculation of Offsetting Requirements ICAO Secretariat 1 ICAO 2018 Objectives A reminder from the previous presentations MRV system is a key component

PRODUCT INFORMATION. Haldex solutions for tractors and agricultural trailers. Innovative Vehicle Solutions

PRODUCT INFORMATION Haldex solutions for tractors and agricultural trailers Innovative Vehicle Solutions Coupling head Protect-O Red coupling head with filter Protect-O Yellow coupling head with filter

AGREEMENT. (Revision 2, including the amendments entered into force on 16 October 1995) Addendum 102: Regulation No. 103

21 March 1997 AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR

Quick reference guide Tyre Control

www.fleet.vdo.com Quick reference guide Tyre Control Dear Customer, This manual describes how to enable the Tyre Control service on the DriverLinc in cab device. About Tyre Control Tyre Control is a service

1. INTERNATIONAL OVERVIEW. 1.0 Area and population. population (1,000) area

1.0 Area and population area population (1,000) km 2 2000 2010 2018 1 inhabitants per km 2 Belgium 30,530 10,251 10,920 11,443 375 Germany 357,380 82,212 81,777 82,952 232 Estonia 45,230 1,397 1,331 1,315

JHS Series Spherical Roller Bearings

JHS Series Spherical Roller Bearings Ultrahigh functionality bearings for revolutionizing industrial machinery and equipment. This is the JHS Series. Aiming to ensure extremely high performance, we utilize

Facts and figures MULTILIFT SELECT 6

Facts and figures MULTILIFT SELECT 6 www.arburg.com MULTILIFT SELECT 6 Technical data Stroke X-axis min. 100 Stroke Z-axis Clamping face, fixed mould platen 190 A D K Stroke Y axis 156 B 2) C 123 P G L

4CKNYC[A2 A2 AKPFGZ GRU AXLE RAIL / 02

P641G RAILWAY INDEX Mitsubishi Materials is constantly engaging ultra modern technologies in the research and development of cutting tools. Results of the research provide solutions for the ever increasing

PARTS MANUAL EMP 285ic 1ph & EMP 285ic 3ph

PARTS MANUAL EMP 285ic 1ph & EMP 285ic 3ph Valid for: serial nos. 745-xxx-xxxx, 747-xxx-xxxx Rights reserved to alter specifications without notice. PART # 0463 619 001 ESAB AB 2018 i Ordering number Product

Continental AG: Strategy & Future Trends

Continental AG: Strategy & Future Trends Manfred Wennemer, Chairman of the ANE Congress Prague June 27, 2007 Continental Corporation 2006 Sales EBIT* Net income attributable to the shareholders of the

Installation Guide ELECTRONIC HEIGHT SENSOR.

Installation Guide ELECTRONIC HEIGHT SENSOR www.haldex.com Electronic Height Sensor Introduction Electronic Height Sensor Electronic height sensor enables the EBS to be available for mechanical suspension

Roll Up WireFree IR. Installation instructions

www.somfy.com TM Roll Up WireFree IR Installation instructions Ref :5059844 Safety This Somfy product must be installed by a professional motorization and home automation installer, for whom these instructions

www.martinsprocket.com AK Single Groove FHP Sheaves Bored-To-Size Martin Datum Pitch L Weight Part A(4L) 3L Stock Finished Bores Thru Lbs. Number OD Belts Belts Type Includes Keyway and Setscrew F E Bore

MWA /MWB Roundline Cylinders

MWA /MWB For working pressures up to and bar Catalogue HY7-/UK June Catalogue HY7-/UK Introduction Standard MW Cylinders Parker's MW range of cylinders is designed for medium and heavy duty industrial

How to notify a waste shipment.

How to notify a waste shipment. Outline of Presentation What do I have to notify? How do I go about this? Problem areas Sources of guidance Contact details Which wastes do I have to notify? Re-cap Notification

EMS215ic, EMP215ic, EM215ic

EMS215ic, EMP215ic, EM215ic Spare parts list 0463 412 001 GB 20170126 Valid for: serial no. 552, 615-xxx-xxxx Ordering number Product Notes 0558 102 239 EMS 215ic Bobbin Ø4-8" (100-200 mm). CSA/Bayonet

Components for test stands

Components for test stands Dr.-Ing. S. Haußmann Industrieelektronik The Company Dr.-Ing. S. Haußmann Industrie elektronik was founded by Dr.-Ing. Siegfried Haußmann in Nürtingen, a small city close to

EXPERIENCE A HIGHER LEVEL

JLG STOCKPICKER s REACHING OUT It s time to put your ladders away. In stores, warehouses and distribution facilities, they ve been replaced by a safer, more productive alternative JLG Stock Pickers. Whether

Please find attached a copy of JAR-VLR Amendment 2 dated February 2007.

oint Aviation Authorities Postal Address: P.O. Box 3000 2130 KA Hoofddorp Visiting Address: Saturnusstraat 50 The Netherlands Tel.: 31 (0)23-5679700 Fax: 31 (0)23-5621714 Our reference number: 01606evd

Centering Unit. Alignment and positioning of transferred workpieces. MACM Series. Table. Max. allowable load weight: 2205 lbs (1000 kg) (MACM10)

Centering Unit Alignment and positioning of transferred workpieces Contributes to space saving on conveyor lines Heavy workpieces can now be aligned and positioned with small cylinders, resulting in compact

BMW ConnectedDrive Services - Information

BMW ConnectedDrive Services - Information 1. General information BMW Vertriebs GmbH, a company founded pursuant to Austrian law, with its registered seat at Siegfried-Marcus-Strasse 24, 5021, Salzburg,

Parts and Cross Reference Guide

Parts and Cross Reference Guide L00090 Rev. 7/07 AA1 and S-ABA Brake Adjusters www.haldex.com Table Of Contents Features Haldex ABA (AA1)............................... 1 Haldex S-ABA...................................

Facts and figures MULTILIFT V 6

Facts and figures MULTILIFT V 6 www.arburg.com MULTILIFT V 6 Technical data F Stroke X-axis 3) Stroke Z-axis 1) Clamping face fixed mould platen E A K 4) Stroke Y axis 2) D 2) 156 B 4) C 2)4) 123 P 1)

New York Air Brake (NYAB) A Subsidiary Of The Knorr-Bremse Group. National Academy Of Science (NAS) October 14 th, Knorr-Bremse Group

New York Air Brake (NYAB) A Subsidiary Of The National Academy Of Science (NAS) October 14 th, 2016 Making mobility safe Knorr-Bremse s daily mission Knorr-Bremse is the world's leading manufacturer of

UGM 4. Water Lubricated Submersible Motors

UGM 4 Water Lubricated Submersible Motors Approvals CERTIFICATE IQNet and SQS hereby certify that the organisation Swiss Pump Company AG 3645 Thun-Gwatt Switzerland Certi ed area Whole company Field of

O-KS COMPACT CAM UNIT. The premium model for highest precision and performance. voestalpine Wire Camtec Technology GmbH

O-KS COMPACT CAM UNIT The premium model for highest precision and performance voestalpine Wire Camtec Technology GmbH www.voestalpine.com/wire www.voestalpine.com/camtec voestalpine Camtec Your innovative

ISO Standard Pneumatic Cylinders SCW Series

ISO Standard Pneumatic Cylinders SCW Series Universal Pneumatic Cylinders with compact switch CKD (Shanghai) Corporation ISO Compliant Pneumatic Cylinders Newly developed SCW Series pneumatic cylinders

ALLROUNDER 520 A. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.

Facts and figures ALLROUNDER 52 A Distance between tie bars: 2.47 x 2.47 (52 x 52 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz www.arburg.com 52 A Machine dimensions 78.8 53.7 33.44

BATTERY TECHNOLOGY. Batteries Customized battery packs Manufacturing and production in Germany and Asia Implementation of all relevant certifications

BATTERY TECHNOLOGY Batteries Customized battery packs Manufacturing and production in Germany and Asia Implementation of all relevant certifications KOMPLETT-LÖSUNGEN COMPLETE SOLUTIONS FÜR FOR IHR BATTERIESYSTEM

BENTELER. Internationalization of the company. International Trade Environment. Klára Třmínková Veronika Ženatá Adriana Šilarová

BENTELER Internationalization of the company International Trade Environment Klára Třmínková Veronika Ženatá Adriana Šilarová Content Profile of Benteler Corporate Products History Regions Internal components

ALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200

Facts and figures ALLROUNDER 72 H Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit (according to EUROMAP): 13, 21, 32 www.arburg.com 72 H Machine dimensions 858 2198 max. 385

Portable Oxygen Concentrator. Give your patients more freedom with mobile oxygen on demand

Portable Oxygen Concentrator Give your patients more freedom with mobile oxygen on demand SIMPLE. PORTABLE. DEPENDABLE. MAXIMISE YOUR PATIENTS INDEPENDENCE AND PEACE OF MIND You can help many of your oxygen

SAMPLE: Wipers intelligence service. Generated: July 11, 2016

SAMPLE: Wipers intelligence service Generated: July 11, 2016 Table of contents Table of contents Introduction... Companies... Denso Corporation... Federal Mogul Corporation... Products... Hella KGaA Hueck

Portable Oxygen Concentrator. Give your patients more freedom with mobile oxygen on demand

Portable Oxygen Concentrator Give your patients more freedom with mobile oxygen on demand SIMPLE. PORTABLE. DEPENDABLE. MAXIMISE YOUR PATIENTS INDEPENDENCE AND PEACE OF MIND You can help many of your oxygen

KRACHT Singapore Marine Products

KRACHT Singapore sales@kracht.com.sg +65 65630544 Marine Products 2 Marine Products Content 3 Company 4 5 Pumps and Valves for Marine Engineering 6 8 Flow Measurement in Maritime Applications 9 Quality

UAE draft regulation for Electric Vehicle

UAE draft regulation for Electric Vehicle Emirates Authority for Standardization and Metrology Eng. Khaled Ali Abdullmajeed Contents - Introduction of ESMA. - Introduction of EV Regulation in UAE - The

UCCU COMPACT CAM UNIT. Best in class. voestalpine Wire Camtec Technology GmbH

UCCU COMPACT CAM UNIT Best in class voestalpine Wire Camtec Technology GmbH www.voestalpine.com/wire www.voestalpine.com/camtec voestalpine Camtec Your innovative and reliable partner voestalpine Camtec

OECD unemployment rate down to 6.4% in March 2016

OECD unemployment rate down to 6.4% in March 2016 The OECD unemployment rate fell by 0.1 percentage point to 6.4% in March 2016, 1.7 percentage point below the January 2013 peak. Across the OECD area,

Installation Guide L /07. AQ15457 ABS Weld-On Sensor Block Axle Hardware Kit

Installation Guide L31235 7/07 AQ15457 ABS Weld-On Sensor Block Axle Hardware Kit Installation Instructions Weld-On Sensor Block Used with AQ960514 or AQ960515 - Haldex Trailer ABS 2S/1M (When replacing

THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY

THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY COMMUNICATION CONCERNING THE GRANTING OF A COMPONENT TYPE-APPROVAL CERTIFICATE IN RESPECT OF A NON-ORIGINAL EXHAUST SYSTEM FOR A TYPE OF MOTORCYCLE PURSUANT

ACEA Report. Vehicles in use Europe 2018

ACEA Report Vehicles in use Europe 2018 TABLE OF CONTENTS Summary... 2 Vehicles in use in Europe... 3 Passenger cars... 3 Light commercial vehicles... 4 Medium and heavy commercial vehicles... 5 Buses...

Certificate of Approval

Certificate of Approval This is to certify that the Management System of: Tesomankatu 31, 33310 Tampere, Finland has been approved by LRQA to the following standards: ISO 14001:2015 David Derrick - Area

Turbo Systems Reduced emissions More driving pleasure

Turbo Systems Reduced emissions More driving pleasure We don t just supply parts and components. We provide a competitive advantage. Futuristic ideas What can you do to significantly reduce the emissions

ALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.

Facts and figures ALLROUNDER 63 H Distance between tie bars: 63 x 63 mm Clamping force: 25 kn Injection unit (acc. to EUROMAP): 8, 13, 21 www.arburg.com 63 H Machine dimensions 858 438 1468 2198 max. 395

ALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290.

Facts and figures ALLROUNDER 37 E Distance between tie bars: 37 x 37 mm Clamping force: 6 kn Injection unit (acc. to EUROMAP): 17, 29 www.arburg.com 37 E Machine dimensions 215 122 85 12 33 435 192 245

ALLROUNDER 520 E. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800.

Facts and figures ALLROUNDER 52 E Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit (acc. to EUROMAP): 29, 4, www.arburg.com 52 E Machine dimensions 2 135 85 12 33 4 13 625 4885

News from IEC Standardization of Environmental Conditions and Tests

Conditions and Tests Technical Advisory Board Meeting Climatic and Atmospheric Pollution Effects on Materials and Equipment Rue des Petits Carmes, 20 1000 Brusssels Hermann Ruoss 12. February 2009 Seite:

Electric Lowering & Raising System 20kg PRODUCT TYPE. Max. weight of light fitting Lowering distance. 4. Lamp circuits. No. of circuit No.

Electric Lowering & Raising System The cost effective maintenance solution for luminaires FEATURES Designed for use of heavier weight light fittings. TYPICAL APPLICATIONS Workshops, Factories, Warehouses

ALLROUNDER 320 C GOLDEN EDITION

Facts and figures ALLROUNDER 32 C GOLDEN EDITION Distance between tie bars: 12.6 x 12.6 (32 x 32 mm) Clamping force: 55 tons Injection unit: 2.3 oz, 3.7 oz www.arburg.com 32 C GOLDEN EDITION Machine dimensions

High Accuracy Wire Electrical Discharge Machines

Equipment and Construction Work for Machine Installation 1. Floor area and foundation work 4. Electrical work W32FB W53FB 2. Factory air-conditioning equipment Recommended optimal temperature 20 1 Heat

E/ECE/324/Rev.2/Add.102/Rev.1 E/ECE/TRANS/505/Rev.2/Add.102/Rev.1

30 August 2011 Agreement Concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions for