DISTRIBUTION CONNECTORS
|
|
|
- Oswald Small
- 6 years ago
- Views:
Transcription
1 SECTION ANDERSON VERSA-CRIMP BATTERY POWERED ACSR CUTTING Model VCACSRCCBP is used to cut ACSR, aluminum, and copper conductors up to 1.50". Cuts standard guy wire and ground rod sizes up to 5/8". This power cutter is ideal for aerial bucket and trench work and is made for one-handed operations. Simply remove the pin latch, place cable into jaw, reinsert the pin and press the trigger to cut. A built in by-pass will pop off if the material is beyond cutter s capacity. It is not recommended to cut hardened steel, EHS guy wire, or wire rope which can damage the blades. Weight: 14 pounds Size: 17" x 12" x 3" High impact plastic carrying and shipping case 2 Batteries (Smart Monitor; Standard available AC charger - 20 minute recharge Shoulder strap Cutting Specifications: ACSR, aluminum, and copper conductor up to 1.50 Soft steel bolts-5/8" Standard guy wire-5/8" Ground rod up to 5/8" VCACSRCCBP NEW ALSO: Mid-Range VCACSR95BPSB now available. (max. 477 MCM), w/standard batteries). Consult factory. VC6350BP VERSA-CRIMP HYDRAULIC COMPRESSION TYPE VC6350BP Crimps wide range of connectors (10,000 psi system) Light in weight-only 9.5 lb Front opening VERSA-CRIMP compression tool allows direct access of the tool to the connector. Crimps H frame tap connectors using O and D nib/nests, up to 250 MCM 180 head rotation Single hand operation Patented head design 7 Type VC6350BP Conductor Range #8 350 MCM Al # ACSR #4 4/0 ACSR (Full Tension) O Die 3/0 & 4/0 #8 300 MCM Cu. Approx. Wt. Each 9.5 lbs. (4.3 kg). 2 Smart Monitor batteries AC charger 20 minute recharge. Shoulder strap 3-year warranty (1-year on batteries) O and D nib/nest -7
2 SECTION VC6500BP DISTRIBUTION CONNECTORS ANDERSON VERSA-CRIMP HYDRAULIC COMPRESSION TYPE VC6500BP Snub-nose design for tight spaces, or panels. Lighter in weight-only 9.4 lbs. Front opening VERSA-CRIMP compression tool allows direct access of the tool to the connector. 180 head rotation.. AC charger - 20 minute recharge.. Type VC6500BP Conductor Range- #8 Str.-500 MCM Bare Al #8 Sol.-500 MCM Bare Cu Approx. Wt. Each- 9.4 lbs. (4.3kg.) (10,000 psi operating pressure) VERSA-CRIMP POWER CUTTER TYPE VCCCBP 8 Rechargeable 14.4V Battery. The flip-top cutter blade provides clear and easy positioning on cable. Heavy duty cable cutter for non-ferrous cables up to two inches O.D. Aluminum and 1000 MCM Bare Copper. Cuts heavy URD Copper and Aluminum cables in limited space; VCCCBP does not cut steel or ACSR cable. Gear reduction motor Battery. AC Charger - 20 minute recharge. Carrying Case. 3-Year warranty (1 year on batteries). VCCCBP * NEW ALSO: Small ACSR Cutter VCCARBP (max. 636 ACSR) available for ACSR cable (not for guy wires or ground rods -- see VCACSR series) Type VCCCBP* Conductor Range-up to 2 O.D. Aluminum 1000 MCM Bare Copper Approx. Wt. Each-6 lbs. (2.7 kg) -8
3 SECTION ANDERSON VERSA-CRIMP HYDRAULIC COMPRESSION TYPE VC63BP The original notched-top VERSA-CRIMP compression tool allows direct access of the tool to the connector. VC63BP High impact plastic carrying and shipping case NOTE: Add suffix D to catalog number for neoprenecovered head. Type VC63BP Conductor Range- #10 Str.-500 MCM Bare Al #10 Str.-500 MCM Bare Cu Approx. Wt. Each lbs. (5.2kg.) (10,000 psi operating system) VERSA-CRIMP HYDRAULIC COMPRESSION TYPE VC6FTBP VC6FTBP 9 Type VC6FTBP Conductor Range- #10 Str.-750 MCM Al/Cu Approx. Wt. Each- 12 lbs. (5.44kg.) (10,000 psi operating system) -9
4 SECTION DISTRIBUTION CONNECTORS ANDERSON VERSA-CRIMP HYDRAULIC COMPRESSION TYPE VC8CBP & VC8UBP VC8CBP Rechargeable 14.4 V Battery Type VC8C Conductor Range MCM Al MCM Cu 250 Str AAC (Full Tension) VC8UBP /ACSR 10 Rechargeable 14.4 V Battery Type VC8U Conductor Range - 3/0 Str MCM Al 3/0 Str (54/7) ACSR 500 Str MCM Cu / /7 ACSR (Full Tension) -10
5 SECTION ANDERSON VERSA-CRIMP BATTERY CHARGER 12V DC TYPE VCDCC Charges VCBPSM in approximately 90 minutes. Plugs into standard 12V cigarette lighter/outlet. ACCESSORIES VCDCC Output Input Charging time Dimensions Weight 4.4V DC 1.5 Amps 12V DC 20 minutes 19OL x 89H x 95W mm 7.5L x 3.5W x 3.75H in 2.2 lbs. (1kg.) ANDERSON VERSA-CRIMP BATTERY CARTRIE 14.4V DC SIGNAL BATTERY TYPE VCBPSM and VCBP ACCESSORIES VCBPSM 1 Year warranty. LED display indicates % power remaining. LED display also indicates number of recharges and percent of charge. Battery life approx recharges NOTE: Standard battery VCBP also available (no LED monitor). Type of Battery Ni CD enclosed cylinder type Output 14.4 V DC Capacity 1.2 AH Charging time 20 minutes + Dimensions 90L x 70W x 135 H mm 3.5L x 2.75W x 5.3H in Weight 1.6 lbs. (.73 kg.) 11-11
Phone: Fax:
REC-Line 20 Fax: 800-345-3767 REC-558U ROBO*CRIMP TM 6 Ton Compression Tool with 1.8 Jaw Opening Accepts W, O and X Type Dies See Page 64 for Available Huskie Dies 6 Ton 8 lbs. with Battery 13 L x 12 H
Battery Operated Compression Tool
ECO-50 Battery Operated Compression Tool Ram stroke : 15 mm Applicable Hex Compression : Max. 150mm2 Cu Lugs 52 kn 397 (L) x 79 (H) x 70 (W) mm 2.3kg (less battery) 3.1kg (with battery) ECO-50 The ECO-50
Battery Powered In-Line Cutting Tool
Battery Powered In-Line Cutting Tool BCTR 18 V, 5.0 Ah Milwaukee Li-ion battery, 3 year warranty 350 tool head rotation Right or left hand ergonomic non-slip cushioned grip LED work light LED battery charge
Cutting & Crimping Tools
Cutting & Crimping Tools Page 1 Table of Contents Code Product Page K3 Ratchet Cutter Cu/AL up to 300mm2 4 K4 Ratchet Cutter Cu/AL up to 500mm2 4 C2 Copper Aluminium Parrot Beak Ratchet Cutter C2 5 K325
OLS U T I L I T Y S E G M E N T
BURNDY TOOLS UTILITY SEGMENT BURNDY Tools exemplify both reliability and engineering knowledge unsurpassed in the industry. BURNDY.COM 3 BURNDY TOOL SERVICE GETS IT DONE! GET IT FIXED Tools repaired at
DISTRIBUTION PRODUCTS
DISTRIBUTION PRODUTS INDEX Section DG distribution tools SERIES DESRIPTION PAGE ONNETOR WRENHES GP... WRENHES / LINEMAN S WRENHES...DG-1/DG-2 RATHET WRENH GP3458... LINEMAN S NUT RUNNER... DG-3 VERSA-RIMP
CUTTERS REL-3000SA REL-2000SA & REL-58RH SINGLE ACTING HYDRAULIC CUTTING HEAD H/P SINGLE ACTING HYDRAULIC SINGLE ACTING HYDRAULIC CUTTING TOOL
QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION Head opens for cable insertion along the line Head opens for cable insertion along the line CUTTERS REL-3000SA REL-2000SA ACSR REL-58RH REL-3000SA SINGLE
Lithium-Ion Battery-Powered Tools
Lithium-Ion Battery-Powered Tools Thomas & Betts. Your best connection for innovative solutions. Wire & Cable Management Cable Protection Systems Power Connection & Control S a f e t y Te c h n o l o g
Distributor Announcement
Date: 1/12/18 USA/INT L New Battery-Operated Tools Cutters, Crimpers and Impact Wrench Klein Tools brings over 160 years of quality, durability and expertise in hand tools to battery-operated tools. This
Accepts BEKU type dies Up to 150 mm 2 Cu lug. The EP-50H was designed to accept dies for BEKU type mechanical tool widely used in European countries.
EP-50H Accepts BEKU type dies Up to 150 mm 2 Cu lug Ram stroke : 15 mm Oil volume required : 18 cc Force at die face : 52 kn 250 (L) mm 1.6 kg Steel carrying case with die tray EP-50H Example of dies The
Non-insulated terminals : 8, 14, 22, 38, 60, 70, 80, 100, 150, 180, 200, 325 mm 2
12A Non-insulated terminals : 8, 14, 22, 38, 60, 70, 80, 100, 150, 180, 200, 325 mm 2 Maximum input pressure: 700 bar Oil volume required : 90 cc Output force : 226 kn 280 (L) mm 7.5 kg Steel carrying
DISTRIBUTION TOOLS SERIES GP FARGO CONNECTOR WRENCHES
DISTRIBUTION S SERIES GP FARGO ONNETOR WRENHES S GP WRENHES Design optimized for lineman use handle separates both ends. (GP201-204 & GP216 are 1 piece style see note) Specially constructed for proper
11
SL-Line www.huskietools.com 11 Battery Operated Tools Huskie Tools Booth ICUEE 2011 SL-ND Pg. 13 ECO-EZ Pg. 18 SL-CB Pg. 16 SL-S20 Pg. 17 Compression Tools-REC Line Pgs. 21-33 Cutting Tools-REC Line Pgs.
Meets requirements of Safety for Handheld, Motor-Operated Electric Tools (UL , CSA C22.2 No )
Meets OSHA Mandated Electrical and Mechanical Product Safety Requirements Certified by CSA, an OSHA accredited NRTL (nationally recognized test lab) to meet mandatory OSHA requirements Meets requirements
HUSKIE TOOLS SPARTACOGROUP.COM 1
HUSKIE TOOLS SPARTACOGROUP.COM 1 INTRODUCING SERIES 7 PRO-LINE TOOLS Huskie Tools has provided the electrical industry with rugged reliable hydraulic cutting & compression tools for over forty years. We
Jumpers & Load Pickup Tools
Jumpers & Load Pickup Tools Catalog 2300 May 2016 Jumpers & Load Pickup Tools 2300 May 2016 Page 2301 All Chance Insulated Jumpers meet ASTM F 2321 Standard Specification. G4758 15kV 5 5 / 8 " G4765 25kV
DISTRIBUTION CONNECTORS SECTION DF COMPRESSION TERMINALS. Aluminum Compression Lugs Aluminum Bi-Metal Pin Terminals Copper Compression Lugs
DISTRIBUTION CONNECTORS COMPRESSION TERMINALS Aluminum Compression Lugs Aluminum Bi-Metal Pin Terminals Copper Compression Lugs SECTION VERSAtile ALUMINUM COMPRESSION TERMINAL TYPE VCEL For use with either
12-Ton Crimper. High-Torque Impact Wrenches. Gear-Driven Cable Cutters. 7-Ton Combination Cable Cutter/Crimpers
K 12-Ton Crimper BAT20-12T1651 Crimper, C-Style Head (includes case, batteries & charger) BAT20-12T165 Crimper, C-style head (includes a case) MCM MCM MCM W O P S C N V A I L M D FO High-Torque Impact
INDEX A. CABLE CRIMPING.
INDEX A. CABLE CRIMPING 4 41 BATTERY CRIMPER 12 TONNE IZUMI 4 BATTERY CRIMPER 12T IN-LINE IZUMI 5 BATTERY MULTI TOOL 12 TONNE IZUMI 6 BATTERY CRIMPER 15 TONNE IZUMI 8 TOOL ACCESSORIES BATTERY IZUMI 10
Category # 1 - Overhead, Primary, & Secondary Conductors
City of Alexandria Bid Proposal # 2214 Open Date - November 27, 2018 Page BF1of BF7 Category # 1 - Overhead, Primary, & Secondary Conductors 1. 2801602110 17,100 LB. CABLE, 477 MCM AAC CONDUCTOR, $ - $
INDEX B. CABLE CUTTING.
INDEX B. CABLE CUTTING 46 75 RATCHET CUTTERS BATTERY IZUMI 46 RATCHET SCISSOR CUTTERS BATTERY 47 SCISSOR CUTTERS BATTERY IZUMI 48 GUILLOTINE CUTTERS BATTERY IZUMI 49 IN-LINE CUTTERS BATTERY IZUMI 50 BOLT/SEAL
Huskie Tools Quality Advantage
Huskie Tools Quality Advantage VERSATILE Small, portable Huskie Tools hydraulic cutters and compression tools eliminate the cost and labor time required for cartage and set up of cumbersome equipment.
CATEGORY YEAR. Hydraulic Tools
Crimp, HAMMER, cut, dig, DRIVE, Saw, tamp, PUMP, drill, Tighten, YOUR WAY THROUGH THE DAY. Electric Utility Tools CATEGORY HYDRAULIC POWER TOOLS YEAR 09-10 FORMAT PRODUCT CATALOG Hydraulic Tools Hydraulic
Huskie Tools Quality Advantage
Huskie Tools Quality Advantage VERSATILE Small, portable Huskie Tools hydraulic cutters and compression tools eliminate the cost and labor time required for cartage and set up of cumbersome equipment.
INDEX A. CABLE CRIMPING.
INDEX A. CABLE CRIMPING 4 41 BATTERY CRIMPER 12 TONNE IZUMI 4 BATTERY CRIMPER 12T IN-LINE IZUMI 6 BATTERY CRIMPER 15 TONNE IZUMI 7 BATTERY MULTI TOOL 12 TONNE IZUMI 8 TOOL ACCESSORIES BATTERY IZUMI 10
HI-LINE UTILITY SUPPLY CO. Phone: Fax: WEJTAP TOOLS WEJTAP HOT STICK ACCESSORY KIT
53 WTK Wejtap Kit (includes all of the below items) WTB Power Unit WTF-Y Large Frame - Yellow WTF-RB Small Frame - Red/Blue WTR-Y Large Removal Clip - Yellow WTR-RB Small Removal Clip - Red Blue WTCK Cleaning
GATOR Battery-powered In-line Cutters
OPERATION MANUAL Serialnummer (ES20L shown) GATOR Battery-powered In-line Cutters Read and understand all of the instructions and safety information in this manual before operating or servicing this tool.
Insulated Street and Highway Lighting Mechanical Connectors Insulated connectors for above-ground applications.
Lighting Mechanical Connectors Insulated Lighting Mechanical Connectors Insulated connectors for above-ground applications. Rubber Insulation Ensures an insulated connection. Models with Street Light Connectors
B. CABLE CUTTING B1 B34
INDEX B. CABLE CUTTING B1 B34 BATTERY CUTTER RATCHET IZUMI B1+ BATTERY CUTTER SCISSOR IZUMI B3+ BATTERY CUTTER BOLT/SEAL GREENLEE B6 BATTERY CUTTER GUILLOTINE IZUMI B7+ BATTERY MULTI TOOL 12T IZUMI B11+
INDEX B. CABLE CUTTING.
INDEX B. CABLE CUTTING 46 75 RATCHET CUTTERS BATTERY IZUMI 46 RATCHET SCISSOR CUTTERS BATTERY 47 SCISSOR CUTTERS BATTERY IZUMI 48 IN-LINE CUTTERS BATTERY IZUMI 49 GUILLOTINE CUTTERS BATTERY IZUMI 50 BATTERY
Number Tube I.P.S. Rod Size or O.D. Range Cable H J W
TYPE GAR D-28 FENCE POST GROUNDING CONNECTOR For Parallel or 90 Copper Cable Connection To Rod or Pipe with the Same Connector High copper alloy ground connector for joining a range of cable, parallel
Jumper Terminals and Tee Taps. delivery
Jumper Terminals and Tee Taps delivery November 017 November 017 Jumper Terminals & Tee Taps Index Compression/Aluminum JTS... Straight Pad for AAC, AAAC, ACAR & ACSR Conductor... -1 JTF... 15 Degree Pad
Item Code Description Unit Qty Total
UNDP ELECTRICITY SECTOR NORTHERN GOVERNORATES Phase XI Item Code Description Unit Qty Total 04-02-00001 Service Pole - 6m, 75mm dia GS Pipe 11250 04-02-00002 9m Tubular Steel Poles complete with all Accessories
PSC Terminations. Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables.
Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables. Sizes are available for all shielded cables in voltage classes from 15kV through 46kV.
REC-54M OPERATION MANUAL. REC-54M: Gear-Driven Cable Cutter
OPERATION MANUAL REC-54M REC-54M: Gear-Driven Cable Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. 195 Internationale
SUBMERSIBLE SECONDARY CONNECTORS SSBC350-4LI. Cond. Range H W L
SUBMERSIBLE SECONDARY CONNECTORS -1- Index TYPE SSBC350-L (Wide-Port Spacing) Rubber Insulated Secondary Connectors SURE-SEAL RUS Approved User friendly wide-port spacing (50% more room for cable training).
CONSOLIDATED EDISON COMPANY OF NEW YORK, INC. 4 IRVING PLACE NEW YORK, NY DISTRIBUTION ENGINEERING NON-NETWORK SYSTEMS
CONSOLIDATED EDISON COMPANY OF NEW YORK, INC. 4 IRVING PLACE NEW YORK, NY 10003 DISTRIBUTION ENGINEERING DEPARTMENT NON-NETWORK SYSTEMS SPECIFICATION EO-100186 REVISION #10 MAY 2007 EFFECTIVE DATE MAY
Kcmil. Mass kg/each. Tel:
Catalog Number Conductor Size Kcmil Conductor Strand Alu Dead End Alu Jumper Steel Dead End Approximative Mass kg/each Cicame Alu Die Cicame Steel Die CSA Alu Die CSA Steel Die TD6N TD7N TD8N TD9N TDN
CP 600V Cable Protectors
Protecrs Mersen CP Protecrs are special purpose limiters which are crimped or bolted cables or terminals clear and isolate faults quickly, increasing the reliability of service entrance and distribution
Wire Mesh Grip Families
Wire Mesh Grip Families Complete offering of wire mesh grips built tough for industrial applications Arrow Hart supplies a broad selection of strain relief, pulling and support grips in a wide range of
DEALS DEALS DEALS. +FREE 20V MAX* CORDLESS RECIPROCATING SAW SPM: Stroke Length: 1-1/8" Bare Tool Only ONLY WHILE SUPPLIES LAST!
OFFER EXPIRES 02.28.17 ONLY WHILE SUPPLIES LAST! 2 TOOL COMBO KIT XR 1/4" 3 Speed Impact Driver XR 1/2" Hammerdrill (2) 5.0 Ah Batteries #052555 399 99 100 OFF! DEALS DEALS DEALS XR BRUSHLESS 2 TOOL COMBO
PRODUCTS FOR THE RAIL AND UTILITY INDUSTRY
PRODUCTS FOR THE RAIL AND UTILITY INDUSTRY connectorproducts.com 1300 John Tipton Blvd. Pennsauken, NJ 08110 Phone: 856.829.9190 Fax: 856.829.9195 Catalog IX.1 American Design American Made Our success
Wire Mesh Grip Families
Wire Mesh Grip Families Complete offering of wire mesh grips built tough for industrial applications Arrow Hart supplies a broad selection of strain relief, pulling and support grips in a wide range of
Chapter 1. Connectors & Fittings for Railways
Chapter Connectors & Fittings for Railways Current Carrying Catenary Dropper Component N Messenger Bz Cable length from L Component N 3 Component N 2 Contact Wire SNCF approved This dropper provides a
Cut Off and Deburring
Cut Off and Deburring Cut Off and Deburring Heavy Duty Pipe Cutters Heavy-Duty Pipe Cutters RIDGID Heavy-Duty Pipe Cutters for fast, burr-free cutting of steel pipes up to. Extra-long shank protects adjustment
REC-SB640 OPERATION MANUAL. REC-SB640 8 Ton Battery Powered Cutting Tool
OPERATION MANUAL REC-SB640 REC-SB640 8 Ton Battery Powered Cutting Tool Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. 195 Internationale
Sherman + Reilly Battery-powered In-line Cutters
OPERATION MANUAL Serial Number (SRS78X shown) Sherman + Reilly Battery-powered In-line Cutters Read and understand all of the instructions and safety information in this manual before operating or servicing
HYDRAULIC CRIMPING TOOLS
HYDRAULIC CRIMPING TOOLS HT 51 New design two speed hydraulic tool, lightweight and compact, this tool is ideal for working in confined spaces. Having the benefit of spring loaded handles, the dies can
SUBMERSIBLE SECONDARY CONNECTORS
SUBMERSIBE SECONDARY CONNECTORS TYPE SSBC350- (Wide-Port Spacing) Rubber Insulated Secondary Connectors SURE-SEA RUS Approved User friendly wide-port spacing (50% more room for cable training). Multiple
AMP STACK III Modular connection system
III Modular connection system The AMP STACK MARK III 25 pair are designed to mass terminate communication cables of solid copper or aluminum conductor wires ranging from 0.32 to 0.8 mm of diameter, (28
DEALS! TOUGH. 1,499 NEW! GUARANTEED - $ 75 OFF - $ 100 OFF $ 75 OFF 18V XRP BATTERY 2 PK.
GUARANTEED DEALS! TOUGH. JOBSITE WIFI ACCESS POINT 2 Gigabit Ethernet (RJ-45) Ports 0.6A/120V AC Power Supply IP67 Rating #0746423 NEW! 1,499 18V XRP BATTERY 2 PK. #0560724 119 The Jobsite WiFi system
Crimpers. Burndy Hand Operated Crimping Tool - Composite polymer handle that requires no adjustment for the life of the tool
Crimpers 79MM Greenlee Utility Double Die Head Battery Crimping Tool EK425L - 18V Lithium-Ion Battery; Up to 325 crimps per charge; 4 second cycle time - 6-Ton Crimping Force - Can be used with all industry
BPLT62BSCR and BPLT62500BSCR
BPLT62BSCR and BPLT62500BSCR Battery Operated Hydraulic Crimping Tool Operating Instruction Manual IMPORTANT: Read and understand all of the instructions and safety information in this manual before operating
TOOLING TOOLING. Free Call:
Hand Crimping Tools 90 9 Hydraulic Crimping Tools 9 Battery Crimping Tools 92 Cable Cutters 93 Cable Strippers 93 Wire Strippers 93 Amphenol Tools 94 Cable Tie Guns 94 Harnessflex Tools 94 Heat Guns 94
Insulated multipole operating tools for front-entry terminal blocks. 1-pole pole pole
Operating Tools Operating tool with partially insulated shaft, ideal for operating terminal blocks Insulated multipole operating tools for front-entry terminal blocks Operating tool (DIN 524), ideal for
Tube Remover and Installer. and Installer Used for servicing Ford systems produced after Screen Extractor. Ford Aerostar Expansion
gauges A/C FLUSH KIT Easy-to-use system removes refrigerant oil, moisture contaminants from system components lines during retrofitting compressor replacement. Kit includes rubber-tipped flush gun, canister
Disconnect & ByPass Switches
Disconnect & ByPass Switches Disconnect & Oil Circuit Recloser Bypass Switches; Regulator & Current Transformer Bypass Switches Electrical Apparatus K-SEC 060 & 090 Contents Type D-73 Distribution Class
POWER CLAMPING. Power Clamping. Air-Powered Hydraulic Pumps
Power Clamping Repair Kits... 213 Rotary Couplers...208 Swing Cylinder Arms... 150 Swing Cylinder Bottom Flange... 149 Swing Cylinder Top Flange... 148 Tubing, Steel... 212 Valves, Air Circuit... 202 203
Hydraulic Crimp Tooling
Hydraulic Crimp Tooling Fast Facts Standard 10,000 psi [68,950 kpa] rated hydraulic pumps and heads Interchangeable TE-design U-dies for crimp force up to 14 tons [125 kn] U-die stroke options of 1 in
Compression Connectors
Compression s Compression H- s Type WR Wide Range luminum s O and D Die Seven Program Pass the requirements of NSI C9. Seven Program provides superior connector performance, lower connection Field-proven
REAL DEALS. 3,599 3,699 $ REAL TOOLS. REAL PROS. NEW! CHECK WITH YOUR LOCAL PLATT FOR EXCLUSIVE IN-STORE DEALS ON THESE DEWALT TOOLS!
REAL PROS. REAL TOOLS. REAL DEALS. 2-TOOL COMBO KIT 1/2" Hammerdrill 1/4" Impact Driver (2) 20V MAX* XR 5.0Ah Batteries #0052555 399 20V MAX* 2-TOOL COMBO KIT Threaded Rod Cutter 1/4" Impact Driver (2)
Grounding Equipment. Catalog 3000 March Grounding Equipment 3000
Grounding Equipment Catalog 3000 March 2013 March 2013 Page 3001 Safe Working Practices There are many reasons for temporary grounding to protect personnel working on de-energized circuits, including:
Hydraulic Cutting Tools
Hydraulic Cutting Tools 15 HYDRAULIC CUTTING TOOLS New Battery powered CUTTINGTOOLS The new battery operated hydraulic cutting tools are now more ergonomic, faster and more reliable than ever Reliable
DISTRIBUTION PRODUCTS
DISTRIBUTION PRODUCTS INDEX SECTION DI OTHER DISTRIBUTION SERIES DESCRIPTION PAGE WILDLIFE PROTECTORS CC101 / CC170.. CUT-OUT COVER, ONE PIECE WILDLIFE PROTECTOR... DI-3 GS... ONE PIECE WILDLIFE PROTECTOR...
Heavy Duty Copper Battery Terminals
Heavy Duty Copper Battery Terminals Constructed of 131 contact copper to provide high conductivity. Raised characters to ensure legibility of important information regarding cable size, post type, and
Precision Hydraulic Compression & Cutting Tools. When it s on the line, you count on Huskie Tools. Volume 8.
Precision Hydraulic Compression & Cutting Tools When it s on the line, you count on Huskie Tools. www.huskietools.com Volume 8 2 Phone: 800-860-6170 Fax: 800-345-3767 Follow Us: @huskietoolsinc linkedin.com/company/huskie-tools
Best choice of electric works
Best choice of electric works Table of Contents Cable Hoists PC / WS 1 Grips S-X 2 Mesh Grips KG-XX 3 SK-XX 4 SG-XX 5 TG-XX 6 FRP Ladders FAD-CC 7 FP-XX 8 Cable Strippers JP-130 9 TW-50A 10 CS-70/150 11
GATOR Battery-powered In-line Cutters
OPERATION MANUAL Serial Number (ES0LX shown) GATOR Battery-powered In-line Cutters Read and understand all of the instructions and safety information in this manual before operating or servicing this tool.
K 22 HK 60/22 HK 60 UNV + UA22 EK 60/22 EKM 60/22
2 K 22 HK 60/22 HK 60 UNV + UA22 EK 60/22 EKM 60/22 EKM 60 UNV + UA22 EK 60 UNV + UA22 THK 22 PK 22 PK 60 UNV + UA22 Crimping dies R 22 Crimping die set, 6-240 ² R 22 in plastic case, 10-pce. Tubular cable
Universal tools. Hand-operated hydraulic universal tool, hydraulic universal head 472. Battery powered universal tools 475. Bus bar tool centre 479
Universal tools Hand-operated hydraulic universal tool, hydraulic universal head 472 Battery powered universal tools 47 Bus bar tool centre 479 471 Universal tools ONE TOOL FOR ALL SITUATIONS - UNIVERSAL
Sherman + Reilly Battery-powered Pistol Grip Cable Cutters
OPERATION MANUAL Serial Number (SRG16X shown) Español... 1 Français... Sherman + Reilly Battery-powered Pistol Grip Cable Cutters Read and understand all of the instructions and safety information in this
Excess Power Equipment
Excess Power Equipment Main Office: 27-29 Mandarin Rd Maddington, WA, 6109 Cable Haul: 25 Mandarin Rd Maddington, WA, 6109 Ph: 08 9493 3077 Fax: 08 9493 2336 www.epe.com.au ABN. 42 649 906 559 Excess Power
REC-630Y OPERATION MANUAL. REC-630Y 6.6 Ton Cutting Tool
OPERATION MANUAL REC-630Y REC-630Y 6.6 Ton Cutting Tool Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. 195 Internationale Blvd
PRESS TOOLS PRODUCT CATALOG
PRESS TOOLS PRODUCT PRESS WITH CONFIDENCE. PRESS WITH THE BEST. RIDGID press tools save you time and money by delivering reliable performance press after press. Every generation of press tools works harder
CONTENTS OVERHEAD SLEEVES AND LUGS
CONTENTS OVERHEAD SLEEVES AND LUGS SECTION 5 SECTION 5 OVERHEAD CONDUCTOR SLEEVES & LUGS..................45 NON TENSION SLEEVES.......................................46 FULL TENSION SLEEVES TYPE A...............................46
Aqua SnakeEye. OA-09 Extended Life NiMH Battery. Operators Manual
Aqua SnakeEye OA-09 Extended Life NiMH Battery Operators Manual Rev. 1.2 Table of Contents I. Introduction II. Part List III. Getting Started IV. Ready for Use V. Trouble Shooting VI. Specifications I.
GATOR Battery-powered Pistol Grip Cable Cutters
OPERATION MANUAL Serial Number (ESG55LX shown) GATOR Battery-powered Pistol Grip Cable Cutters Read and understand all of the instructions and safety information in this manual before operating or servicing
Type Termination Cable Size Copper Aluminum 2 CP2C1-1/0 CP1/0C1-2/0 CP2/0C1-4/0 CP4/0C1 CP4/0A1. Cable 250kcmil CP250C3 CP250A3
C 600V rotectors ECIL UROE Description # for Type Type Termination ize Copper luminum 2 C2C1-1/0 C1/0C1-2/0 C2/0C1-4/0 C4/0C1 C4/01 250kcmil C250C1 C2501 1 to 350kcmil C350C1 C3501 400kcmil C400C1-500kcmil
TRANSMISSION PRODUCTS
TRANSMISSION PRODUCTS INDEX Deadends bolted/aluminum AR1/AR2... QUADRANT STRAIN CLAMP...TA-4 PG/DE... QUADRANT STRAIN CLAMP...TA-3 SD... QUADRANT STRAIN CLAMP...TA-1 SDT2... DOUBLE GROOVE STRAIN CLAMP...TA-2
Anti-Rotational Connectors No-turn design keeps connector securely in place even under vibration. Anti-Rotational Connectors
Anti-Rotational Connectors No-turn design keeps connector securely in place even under vibration. Anti-Rotational Connectors Blackburn Anti-Rotational Connectors are designed with a rib on the bottom that
POWER CLAMPING.
www.jergensinc.com POWER CLAMPING Air Circuit Controls- 2-Hand No Tie Down....59 Booster Clamping Kit....49 Boosters, High Pressure/Volume....47 Booster Installation Kits....48 Boosters, Pre-Fill....44
SERVICE ATTACHMENT ON A BUILDING WITH BUS DUCT SERVICE ENTRANCE AND INDOOR METERING
SERVICE ATTACHMENT ON A BUILDING WITH BUS DUCT SERVICE ENTRANCE AND INDOOR METERING Obtain acceptance and specific details from the local Company office. 1. Service entrance duct (see Note 1). Company
MICHIGAN S ONLY AUTHORIZED WARRANTY SERVICE CENTER. Industrial Equipment Rental & Service
MICHIGAN S ONLY AUTHORIZED WARRANTY SERVICE CENTER Industrial Equipment Rental & Service Our sales, repair, and customer service teams received extensive training from Greenlee for the full line of products
Thank you for your interest in the Copper Battery Terminals through the farm magazine.
Thank you for your interest in the Copper Battery Terminals through the farm magazine. We have enclosed our literature on the battery terminals and related products along with our product listing and catalog
04.02 SPLICES AUTOMATIC SPLICE INSTALLATION ONE PIECE COMPRESSION SPLICE SPLICING SLEEVES AND DIE SIZES FOR ALUMINUM AND COPPER CONDUCTORS
4. GENERAL INSTALLATION GUIDE FOR CONNECTORS 4. INSTALLATION GUIDE FOR CONNECTORS 4.4 ELECTRIC CONTACT INHIBITORS 4.6 CONDUCTOR CLEANING TOOLS 4.8 4. SPLICES AUTOMATIC SPLICE INSTALLATION AUTOMATIC SPLICE
REC-3610 OPERATION MANUAL. REC Ton Compression Tool
OPERATION MANUAL REC-3610 REC-3610-15 Ton Compression Tool Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. 195 Internationale
HC-5010-R Operator s Manual
HC-5010-R Operator s Manual Hand Swaging Tool Battery-Powered SPECIFICATIONS Swages aluminum and copper oval sleeves for 3/32, 1/8, 3/16, 1/4 and 5/16 sizes wire rope. CRIMPING TOOL Output: 6 ton Weight:
Tubing Cutters No. 101 Tubing Cutter Spare Cutter Wheel NOTE: Order parts by Catalog Number only. DO NOT order by Reference Number. Ref.
No. 0 Tubing Cutter Wheel Housing 0 Cutter Wheel Pin and Clip (Incl. Ref. No. ) E Cutter Wheel Stop Pin 0 Roll () Roller Pin () 0 Screw w/washer Knob Retaining Ring 0 Feed Screw Thrust Washer Roll Housing
Tube Plugs.
Tube Plugs www.elliott-tool.com Tube Plugs Table of Contents Page Tube Plugs Aluminum Siphons Boilers-Firetube Boilers-Watertube Sugar Mill Vacuum Pans Surface Condensers Chillers & Heat Exchangers Feedwater
Tools, Dies and Kits. Blackburn Color-Keyed Homac. Table of Contents
Blackburn Color-Keyed Homac Table of Contents Thomas & Betts offers a complete range of tools for industrial electrical applications. This section provides a look at our extensive tool offering including
Chance grounding clamps, ferrules and cable meet ASTM F Grounding Equipment
3001 Grounding Equipment Warranty - Material Hubbell Power Systems, Inc. warrants all products sold by it to be merchantable (as such term is defined in the Uniform Commercial Code) and to be free from
Connector Installation Guide Compression and Mechanical Connectors
Connector Installation Guide Compression and Mechanical Connectors Typical Cross Section of a Compression Connector Before Installation Before compression, a typical cross section of cable consists of
Battary powered cutting tool. AS6-S32 Art convincing solutions. Video
Hydraulic cutting tool Smart Line Operating instructions Battary powered cutting tool AS6-S32 Art. 216419 Video 216419 convincing solutions 1. Technical data Area of application: Separating copper and
TOOLS & MISCELLANEOUS
TOOLS & MISCELLANEOUS TABLE OF CONTENTS 2 Flashlights...4-5 Hand Tools...5-9 Cutters...9-10 Grips... 10 Hoists... 10 Tape... 10-12 Gloves... 12 Miscellaneous... 12-15 100 Bromley Business Parkway Brighton,
ECO-336 OPERATION MANUAL. ECO Ton Streamline Cutting Tool
OPERATION MANUAL ECO-336 ECO-336 6 Ton Streamline Cutting Tool Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. 195 Internationale
CABINET - INSTRUMENT TRANSFORMER Indoor - Outdoor, 480 Volt Maximum 1200, 1600, 2000 Ampere
Printed from NIPSCO.com 04-01-17 PAGE 1 OF 6 USE: 1. For commercial and industrial installation, purchased and installed by the customer. 2. To enclose 600 volt insulation class instrument transformers
Manufacturing quality. Delivering service. Single Conductors DESCRIPTION: Single copper conductor, tinned stranded insulated with moisture and heat resistant, chemically cross-linked polyethylene insulation
TOOLS FOR ELECTRICAL WIRING. IZUMI PRODUCTS COMPANY
TOOLS FOR ELECTRICAL WIRING www.izumiproducts.co.jp IZUMI PRODUCTS COMPANY Over 60 years of experience in precision manufacturing and technology. IZUMI PRODUCTS COMPANY began manufacturing gauges and jigs
GATOR Battery-powered In-line X Tools
SERVICE MANUAL (EK2LX shown) GATOR Battery-powered In-line X Tools Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this
SPIRAL VIBRATION DAMPERS FOR AAC, AAAC, ACSR, COPPER, SC/AC & SC/GZ CONDUCTORS. Part Number
SPIRAL VIBRATION DAMPERS FOR AAC, AAAC, ACSR, COPPER, SC/AC & SC/GZ CONDUCTORS Made from high impact, UV resistant, polyvinyl chloride (PVC), they are non-corrosive and do not abrade the conductor or require