Excellence In Power Solutions

Transcription

1 Excellence In Power Solutions Power Supplies Chargers LED Drivers E²MS

2 Content FRIWO... 4 Switchmode Power Supply Series PP 3, PP 6, PP GPP 6, GPP 10, GPP 18, GPP MPP 6, MPP 15, MPP DT 12, DT 60, DT 100, DT Medical Power Supply Series GPP 6, GPP 10, GPP 18, GPP USB Medical PP 8, MPP 15, MPP DT 12, DT 50, DT 80, DT USB Series GPP USB, PP USB, GUP, PP Mini USB CPP Series PP 12, PP 18, PP In-wall Power Supply Series UP 6, UP 12, UP 18, UP USB Open Frame OF 65, OF 100, OF OF 250, OF Chargers Li-Ion, LiFePO NiCd / NiMH, Pb Accessories Primary / Secondary Adapter Plug System Power Cords LED Drivers LT UP, LT 10, LT 20, LT 40, LT accessories LT 40 WP, LT 40 SQ, LT 60, LT 60 SQ LT 60 DPA, LT 100, DIMMbox, Light control E 2 MS Glossary Addresses

3 Innovative, efficient and competitive LED drivers, power supplies and chargers Competent R&D and manufacturing services for electronic modules Sustainable value for our customers, employees, owners, suppliers and partners Global Player Power Supplies / Chargers FRIWO operates worldwide as leading manufacturer of LED drivers, battery chargers and power supplies. FRIWO is the best resource for value-added electronics development and manufacturing. With our products and services we serve demanding clients in segments like electric mobility, power tools, high quality consumer equipment, medical, industrial automation, LED lighting and renewable energy. Since FRIWO has developed the world s first power supply, the name has become a trademark. FRIWO stands for technical competence in standard and customized solutions, from concept to finished product. In 1971 FRIWO has laid the foundation for constant market success and sets landmarks for power supply and charging technology, in accordance with current safety standards and regulations. FRIWO Highlights Global manufacturing in Europe and Asia Local Engineering High Quality Reliability / Long life cycle Robust, compact design Short development cycles Mechanical / Electrical Design PCB layout Short development cycles EMI laboratory 3D Printer Prototyping We consider it a permanent challenge to keep up with current and future technologies. Customized products for contactless energy transfer have already been designed and are available for transmissions of up to 30 Watts., Regulations and Responsibility The stringent criteria and requirements of the various standards, are, of course, respected by FRIWO, many products remain even far below threshold limits. FRIWO cooperates with leading test and inspection institutes, and the sophisticated development of the products allows worldwide approvals and marketing. All units are thoroughly tested for reliability in our own accredited test centers and leave our factory as zero defect products. FRIWO power supply and charging platforms are approved in Europe, the USA and Canada without any review. Laws and regulations regarding environmental responsibility and conservation of natural resources are becoming increasingly important. Based on the EU directive all FRIWO units meet the Electrical and Electronic Equipment Act WEEE. Customized solutions Rapid Prototyping Certified according to ISO 9001:2008 DIN EN ISO 14001:2009 TS16949 Safety and Compliance RoHS, WEEE and REACH conform Reliability Long term stability Drop tests X-Ray 100% inspection Medical safety standard 3rd Edition EN , ES60601 Expert knowledge and close relationships with approval Proprietary IC Low Standby High efficiency (Valley detection) Universal operation mode Optimized IU curve for constant current and constant voltage Know-how protection / copy protection Potting Protection against harsh environmental conditions IP67 Robustness Shock resistance Peak current concepts Direct access to FRIWO engineers agencies (SIQ, VDE, UL, ) Lowest leakage currents (no Y-capacitor) 4 5

4 PP 3 FW Watts Ripple EURO USA / Japan UK Voltage Current Voltage Order No. Order No. Order No. Switchmode Power Supplies PP Series All products conform to IEC Audio Bluetooth / WLAN Digital cameras Communication accessories Measurement and weighing technology MPEG Player Modems DSL, ADSL, VDSL PDA Universal input 100 to 240 V AC Low leakage current 10 µa Low standby power 0.3 Watts PP 6 FW 7601 EURO USA / Japan 28 mm 65 mm 28 mm 61.2 mm 21.2 mm 21.2 mm 61.2 mm 61 mm UK Australia 65 mm 65 mm 39.8 mm 44.6 mm 50.4 mm 17 mm 42.8 mm 50.4 mm 6 Watts 5 V 650 ma 300 mv pp V 550 ma 300 mv pp V 450 ma 300 mv pp V 360 ma 300 mv pp V 270 ma 300 mv pp V 220 ma 300 mv pp V 135 ma 300 mv pp Ripple EURO USA / Japan Voltage Current Voltage Order No. Order No. Safety technology 5 V 1000 ma 200 mv pp mm 76.5 mm 26.7 mm 26.7 mm 6 V 850 ma 180 mv pp V 650 ma 150 mv pp V 550 ma 150 mv pp V 450 ma 150 mv pp V 360 ma 150 mv pp V 300 ma 150 mv pp Input voltage 100 to 240 V AC (± 10 %) Input current 90 ma (PP 3) 150 ma (PP 6) 200 ma (PP 8) 75 % typ. at full load Conforms to EN 55011, EN / B, FCC 47 part 15, EN , EN , EN , EN , EN , EN , EN voltage tolerance ± 2% (without consideration of the output lead) Operating temperature 0 to 40 C at maximum load Storage temperature - 20 to 70 C 5 % to 95 % non condensing Fulfils class II, SELV according to following standards: IEC / EN / UL hours at maximum load Weight approx. 60 g (PP 3) 105 g (PP 6) 110 g (PP 8) AC input: FRIWO exchangeable mains plug system: EURO, UK, USA / Japan* DC output: Universal output plug system (page 34) PP 8 FW 7333S EURO USA / Japan EURO 45 mm 82 mm 45 mm 68 mm 33.6 mm 70.7 mm 30 mm 30 mm 77 mm 77 mm UK Australia USA / Japan 33.6 mm 57.3 mm 8 Watts 45 mm 45 mm 71 mm 81 mm 30 mm 49 mm 30 mm 38 mm 77 mm 77 mm 24 V 220 ma 150 mv pp Ripple EURO USA / Japan UK Voltage Current Voltage Order No. Order No. Order No. 5 V 1300 ma 200 mv pp V 1150 ma 180 mv pp V 900 ma 150 mv pp V 800 ma 150 mv pp V 700 ma 150 mv pp V 530 ma 150 mv pp V 440 ma 150 mv pp V 330 ma 150 mv pp * Australia version available for OEM quantities 6 7

5 GPP 6 FW Watts 35.5 mm 5 V 1100 ma 200 mv pp V 1000 ma 200 mv pp Switchmode Power Supplies GPP Series with exchangeable primary adapters 52 mm 7.5 V 800 ma 200 mv pp V 600 ma 200 mv pp V 500 ma 200 mv pp V 400 ma 200 mv pp V 330 ma 200 mv pp All products conform to IEC mm 24 V 250 ma 200 mv pp Mobile applications Bluetooth Digital cameras Communication accessories Measurement and weighing technology Modems DSL, WLAN Elektronic cash systems Safety technology Universal input 100 to 240 V AC Exchangeable primary adapters Low leakage current 10 µa (GPP 6, GPP 10, GPP 18) Low standby power 0.3 Watts GPP 10 FW mm 66 mm 10 Watts 5 V 1600 ma 75 mv pp V 1400 ma 75 mv pp V 1000 ma 75 mv pp V 800 ma 75 mv pp V 700 ma 75 mv pp V 560 ma 125 mv pp V 420 ma 125 mv pp mm GPP 18 FW Watts Input voltage 100 to 240 V AC (± 10 %) Input current 150 ma (GPP 6), 250 ma (GPP 10), 400 ma (GPP 18), 600 ma (GPP 30) 80 % typ. at full load Conforms to EN 55011, EN / B, FCC 47 part 15, EN , EN , EN , EN , EN , EN , EN voltage tolerance ± 2% (without consideration of the output lead) 39.5 mm 85 mm 5 V 3000 ma 75 mv pp V 2500 ma 75 mv pp V 1800 ma 90 mv pp V 1500 ma 100 mv pp V 1200 ma 100 mv pp V 1000 ma 180 mv pp V 750 ma 180 mv pp Operating temperature 0 to 40 C at maximum load Storage temperature -40 to 70 C 5 % to 95 % non condensing Fulfils class II, SELV according to following standards: IEC / EN / UL hours at maximum load GPP 30 FW mm 52 mm 85 mm 30 Watts 5 V 5000 ma 50 mv pp V 4200 ma 60 mv pp V 3600 ma 75 mv pp V 3000 ma 90 mv pp V 2500 ma 120 mv pp Weight approx. 80 g (GPP 6), 113 g (GPP 10), 170 g (GPP 18) 200 g (GPP 30) 15 V 2000 ma 150 mv pp AC input: 18 V 1650 ma 180 mv pp FRIWO exchangeable mains plug system: EURO, UK, USA / Japan, Australia, IEC 24 V 1250 ma 240 mv pp DC output: Universal output plug system (page 34) 48 V 625 ma 240 mv pp mm For primary adapters see page

6 MPP 6 FW Watts 5 V 1000 ma 200 mv pp V 850 ma 180 mv pp Switchmode Power Supplies MPP Series with exchangeable primary adapters 57 mm 7.5 V 650 ma 150 mv pp V 550 ma 150 mv pp V 450 ma 150 mv pp V 360 ma 150 mv pp V 300 ma 150 mv pp All products conform to IEC mm 24 V 220 ma 150 mv pp mm Weighing technology WLAN modems Bluetooth Communication accessories Measurement technology LED applications Laser technology IT accessories Safety technology Universal input 100 to 240 V AC Exchangeable primary adapters Low standby power 0.3 Watts High efficiency MPP 15 FW Watts 5 V 3000 ma 75 mv pp V 2500 ma 75 mv pp mm 7.5 V 2000 ma 75 mv pp V 1800 ma 90 mv pp V 1300 ma 120 mv pp V 1000 ma 150 mv pp V 850 ma 180 mv pp V 650 ma 240 mv pp Input voltage 100 to 240 V AC (± 10 %) Input current 150 ma (MPP 6), 400 ma (MPP 15), 700 ma (MPP 30) 80 % typ. at full load, resp. 75 % (MPP 6) Conforms to EN 55011, EN / B, FCC 47 part 15, EN , EN , EN , EN , EN , EN , EN voltage tolerance ± 2% (without consideration of the output lead) Operating temperature 0 to 40 C at maximum load Storage temperature - 40 to 70 C 5 % to 95 % non condensing MPP 30 FW mm 87.5 mm 30 Watts 39 mm 48 V 375 ma 100 mv pp V 5000 ma 50 mv pp V 4200 ma 60 mv pp V 3600 ma 75 mv pp Fulfils class II, SELV according to following standards: IEC / EN / UL mm 9 V 3000 ma 90 mv pp V 2500 ma 120 mv pp V 2000 ma 150 mv pp hours at maximum load 18 V 1650 ma 180 mv pp V 1250 ma 240 mv pp Weight approx. 105 g (MPP 6), 160 g (MPP 15), 255 g (MPP 30) AC input: FRIWO exchangeable mains plug system: EURO, UK, USA / Japan, Australia, IEC DC output: Universal output plug system (page 34) 105 mm 10 mm For primary adapters see page

7 DT 12 FW Watts 5 V 2000 ma 200 mv pp Switchmode Power Supplies DT Series All products conform to IEC and C8-socket 92 mm 27.5 mm 40 mm 5,9 V 1700 ma 200 mv pp ,5 V 1400 ma 180 mv pp V 1200 ma 135 mv pp V 1000 ma 180 mv pp V 800 ma 112 mv pp V 660 ma 135 mv pp V 500 ma 300 mv pp V 250 ma 480 mv pp Audio Bluetooth / WLAN Digital cameras Communication accessories Measurement and weighing technology MPEG Players Universal input 100 to 240 V AC Low standby power 0.3 Watts (DT 12) resp. 0.5 Watts (DT 60, DT 100, DT 150) High efficiency DT 60 DT Watts 33 mm 12 V 5000 ma 250 mv pp V 4000 ma 250 mv pp V 3300 ma 250 mv pp Modems DSL, ADSL, VDSL Safety technology Laboratory equipment C8-socket mm 24 V 2500 ma 250 mv pp mm DT 100 DT Watts Input voltage 100 to 240 V AC (± 10 %) Input current 300 ma (DT 12), 1500 ma (DT 100), 1600 ma (DT 60), 2000 ma (DT 150) up to 91% typ. at full load Conforms to EN 55011, EN / B, FCC 47 part 15, EN , EN , EN , EN , EN , EN , EN voltage tolerance ± 2% (without consideration of the output lead) C14-socket 150 mm 32.5 mm 70 mm 24 V 4170 ma 240 mv pp Operating temperature 0 to 40 C at maximum load Storage temperature -10 to 70 C 10 % to 95 % non condensing Fulfils class II, SELV according to following standards: IEC / EN / UL 60950, DT 100 and DT 150 fulfils class I hours at maximum load DT 150 DT Watts 38.5 mm 24 V 6250 ma 240 mv pp Weight approx. 135 g (DT 12), 260 g (DT 60), 500 g (DT 100), 622 g (DT 150) AC input: 2-pole IEC 320, C8-socket (DT 12, DT 60) C14-socket (DT 100, DT 150) DC output (not DT 150): Universal output plug system (page 34) C14-socket 210 mm 62 mm For power cords see page

8 GPP 6 FW 7662M 6 Watts 35.5 mm 5 V 1100 ma 200 mv pp V 1000 ma 200 mv pp Switchmode Power Supplies Medical Series with exchangeable primary adapters 52 mm 7.5 V 800 ma 200 mv pp V 600 ma 200 mv pp V 500 ma 200 mv pp V 400 ma 200 mv pp V 330 ma 200 mv pp All products conform to IEC mm 24 V 250 ma 200 mv pp Blood analysers Patient monitors Measuring equipment Laboratory equipment Inhalers Patient lifts Universal input 100 to 240 V AC Exchangeable primary adapters Green LED indicator Low leakage current 10 µa Low standby power 2 x MOPP GPP 10 FW 7660M 10 Watts 35.5 mm 5 V 1600 ma 75 mv pp V 1400 ma 75 mv pp V 1200 ma 75 mv pp V 1000 ma 75 mv pp mm 12 V 800 ma 75 mv pp V 700 ma 75 mv pp V 560 ma 125 mv pp V 420 ma 125 mv pp mm Input voltage 100 to 240 V AC (± 10%) Input current 250 to 110 ma (GPP6) 205 to 110 ma (GPP 10) 400 to 200 ma (GPP 18) 200 to 100 ma (GPP USB Medical) 80% typ. at full load Conforms to EN 55011, EN / B, IEC , FCC 47 Teil 15, EN , EN , EN , EN , EN , EN , EN voltage tolerance ± 2% (without consideration of the output lead) GPP 18 FW 7556M 85 mm 18 Watts 39.5 mm 5 V 3000 ma 75 mv pp V 2500 ma 75 mv pp V 2000 ma 75 mv pp V 1800 ma 90 mv pp V 1500 ma 100 mv pp V 1200 ma 100 mv pp V 1000 ma 180 mv pp Operating temperature 0 to 40 C at maximum load Storage temperature -40 to 70 C 5 % to 95 % non condensing 52 mm 24 V 750 ma 180 mv pp Fulfils class II, SELV according to following standards: ES 60601, IEC , UL 2601, CE label, fulfils medical application class B / BF / CF GPP USB Medical 7.5 Watts 200,000 hours at maximum load 34.5 mm 5 V 1500 ma 50 mv pp Weight 80 g (GPP 6), 113 g (GPP 10), 170 g (GPP 18), 60 g (GPP USB Medical) AC input: FRIWO exchangeable mains plug system: EURO, UK, USA / Japan, Australia, IEC DC output: Universal output plug system (page 34) USB socket: Type A (GPP USB Medical) 52 mm 63 mm For primary adapters see page

9 PP 8 FW 7333SM 8 Watts Ripple EURO USA / Japan UK Voltage Current Voltage Order No. Order No. Order No. 5 V 1300 ma 200 mv pp V 1150 ma 180 mv pp Switchmode Power Supplies Medical Series with exchangeable primary adapters (MPP 15 / 30) 77 mm 77 mm 77 mm 45 mm 82 mm 30 mm 49 mm 45 mm 81 mm 45 mm 68 mm 7.5 V 900 ma 150 mv pp V 800 ma 150 mv pp V 700 ma 150 mv pp V 530 ma 150 mv pp V 440 ma 150 mv pp V 330 ma 150 mv pp All products conform to IEC EURO UK USA / Japan Blood analysers Patient monitors Measuring equipment Laboratory equipment Universal input 100 to 240 V AC Green LED indicator Low standby power Inhalers Patient lifts Exchangeable primary adapters (MPP 15 / 30) 2 x MOPP Low leakage current 10 µa MPP 15 FW 7555M 15 Watts 5 V 2400 ma 75 mv pp V 2100 ma 75 mv pp mm 7.5 V 1700 ma 75 mv pp V 1500 ma 90 mv pp V 1250 ma 120 mv pp V 1000 ma 150 mv pp Input voltage 100 to 240 V AC (± 10%) Input current 200 to 80 ma (PP 8) 350 to 150 ma (MPP 15) 700 to 350 ma (MPP 30) 80 % typ. at full load, PP 8 75% Conforms to EN 55011, EN / B, IEC FCC 47 Teil 15, EN , EN , EN , EN , EN , EN , EN voltage tolerance ± 2% (without consideration of the output lead) Operating temperature 0 to 40 C at maximum load Storage temperature -40 to 70 C, PP 8 (-20 to 70 C) 5 % to 95 % non condensing Fulfils class II, SELV according to following standards: ES 60601, IEC , UL 2601, CE label, fulfils medical application class B / BF / CF 200,000 hours at maximum load MPP 30 FW 7362M 51.5 mm 68 mm 87.5 mm 105 mm 30 Watts 39 mm 18 V 840 ma 180 mv pp V 625 ma 240 mv pp V 4000 ma 75 mv pp V 3600 ma 75 mv pp V 3300 ma 75 mv pp V 3000 ma 90 mv pp V 2500 ma 100 mv pp V 2000 ma 100 mv pp V 1660 ma 120 mv pp V 1250 ma 120 mv pp Weight approx. 110 g (PP 8), 160 g (MPP 15), 255 g (MPP 30) AC input: FRIWO exchangeable mains plug system: EURO, UK, USA / Japan, Australia, IEC PP 8: EURO, UK, USA / Japan DC output: Universal output plug system (page 34) 10 mm For primary adapters see page

10 DT 12 FW 7401M 12 Watts 40 mm 5 V 2000 ma 120 mv pp V 1700 ma 120 mv pp Switchmode Power Supplies Medical Series All products conform to IEC C8 socket 27.5 mm 92 mm 7.5 V 1400 ma 115 mv pp V 1200 ma 135 mv pp V 1000 ma 180 mv pp V 800 ma 112 mv pp V 660 ma 135 mv pp V 500 ma 300 mv pp Blood analysers Patient monitors Measuring equipment Laboratory equipment Inhalers Patient lifts Universal input 100 to 240 V AC Green LED indicator Leakage current 10 µa (DT µa, DT µa) 2 x MOPP DT 50 FW 7405M 38.1 mm 50 Watts 5 V 5000 ma 120 mv pp V 3800 ma 120 mv pp V 3000 ma 120 mv pp V 2200 ma 120 mv pp mm C8 socket 60 mm Input voltage 100 to 240 V AC (± 10%) Input current 230 to 140 ma (DT 12) to 500 ma (DT 50) to 850 ma (DT 80) to 700 ma (DT 150) 90 % typ. at full load Conforms to EN 55011, EN / B, IEC FCC 47 part 15, EN , EN , EN , EN , EN , EN , EN voltage tolerance ± 2% (without consideration of the output lead) DT 80 FW 7488M C8 socket 80 Watts 79 mm 149 mm 12 V 5500 ma 120 mv pp V 5000 ma 120 mv pp V 3300 ma 120 mv pp Operating temperature 0 to 40 C at maximum load Storage temperature -40 to 70 C 5 % to 95 % non condensing 50 mm Fulfils class II, SELV according to following standards: IEC , UL 2601, ES fulfils medical application class B / BF / CF (DT 12 / DT 50) and B / BF (DT 80, DT 150), class I DT ,000 hours at maximum load DT 150 DT 150M 150 Watts 38.5 mm 24 V 6250 ma 240 mv pp Weight approx. 135 g (DT 12), 295 g (DT 50), 350 g (DT 80), 622 g (DT 150) AC input: 2-pole IEC 320, C8-socket (DT 12, DT 50, DT 80) C14-socket (DT 150) DC output (not DT 150): Universal output plug system (page 34) C14 socket 210 mm 62 mm For power cords see page

11 GPP USB FW Watts 63 mm 5 V 700 ma 200 mv pp Switchmode Power Supplies USB Series 52 mm with exchangeable primary adapters (GPP USB, GUP) All products conform to IEC mm 28 mm Bluetooth Digital cameras Universal input 100 to 240 V AC PP USB FW 7710 (700 ma) FW 7715 (1.000 ma) 3.5 / 5 Watts Ripple EURO USA / Japan UK Voltage Current Voltage Order No. Order No. Order No. Wireless communication accessories PDAs Household applications MP3 Players E-Books Exchangeable primary adapters (GPP USB) Low standby power 0.3 Watts Low weight Compact design 64 mm 53 mm 26 mm 64 mm 35 mm 26 mm 5 V 700 ma 200 mv pp V 1000 ma 300 mv pp EURO USA / Japan GUP FW Watts Input voltage 100 to 240 V AC (± 10%) Input current 100 ma (PP USB, GUP), 75 ma (GPP USB) 150 ma (PP Mini USB) 70 % typ. at full load Conforms to EN 55011, EN / B, EN 55024, FCC 41 part 15, EN , EN , EN , EN , EN , EN , EN voltage tolerance ± 2% (without consideration of the output lead) Operating temperature 0 to 40 C at maximum load Storage temperature -20 to 70 C 5 % to 95 % non condensing 37 mm 29 mm 53 mm 5 V 900 ma 200 mv pp Fulfils class II, SELV according to following standards: EN / IEC 60950,UL ,000 hours at maximum load PP Mini USB FW mm 18 mm 5 Watts 35.5 mm 22 mm Ripple EURO USA Voltage Current Voltage Oder No. Order No. 5 V 1000 ma 300 mv pp V 1000 ma 300 mv pp Color: white Weight approx. 36 g (PP USB), 50 g (GPP USB), 35 g (GUP), 25 g (PP Mini USB) AC input: FRIWO exchangeable mains plug system (GPP USB, GUP): EURO, UK, USA / Japan, Australia, IEC DC output: USB socket type A EURO USA / Japan For primary adapters see page mm 54 mm

12 PP 12 FW Watts Euro 12 V 1000 ma 120 mv pp Switchmode Power Supplies CPP Series All products conform to IEC 60950; PP18 additional to IEC mm 89 mm Router E-Books Blood analysers Inhalers Universal input 100 to 240 V AC Low weight Low standby power 0.3 Watts PP 18 FW 7598 M 18 Watts 2 x MOPP (PP18) Euro 12 V 1500 ma 200 mv pp mm 77 mm 30 mm 77 mm Input voltage 100 to 240 V AC (±10%) Input current 300 ma (PP12), 550 ma (PP30), ma (PP18) up to 78% typ. at full load Conforms to EN55011, EN 55022/B, EN55024, FCC41 part 15, EN , EN , EN , EN , EN , EN , EN , EN voltage tolerance ± 2% (without consideration of the output lead) PP 30 FW Watts Euro 12 V 2000 ma 300 mv pp Operating temperature 0 to 40 C at maximum load Storage temperature -20 to +70 C 5% to 95% non condensing 89 mm Fulfils class II, SELV according to following standards: EN/IEC/UL 60950, EN/IEC (PP18) 36 mm 200,000 hours at maximum load 93 mm Weight approx. 120g (PP12), 125g (PP18), 150g (PP30) AC input: EURO DC output: Universal output plug system (page 34) 22 23

13 UP 6 FW Watts ts 4 V 1300 ma 300 mv pp V 1200 ma 300 mv pp Switchmode Power Supplies In-wall Series All products conform to IEC 61558, mm 48 mm 6 V 1000 ma 300 mv pp V 660 ma 300 mv pp V 500 ma 300 mv pp V 400 ma 300 mv pp V 330 ma 300 mv pp V 250 ma 300 mv pp mm Safety technology Water taps Shutter control Door opener LED applications (UP 6) E-Books Universal input 100 to 240 V AC Low standby power 0.3 Watts High output power UP 12 FW Watts ts 12 V 1000 ma 300 mv pp V 500 ma 300 mv pp PDAs Compact design MP3-Players IP 64 protection class Tablets 35 mm 48 mm 51 mm Input voltage 100 to 240 V AC (± 10 %) Input current 150 ma (UP 6), 400 ma (UP 12, UP 18). 180 ma (UP USB) up to 80 % typ. at full load Conforms to EN 55011, 55014, EN / B, EN 55024, FCC 41 part 15, EN , EN , EN , EN , EN , EN , EN , voltage tolerance ± 2% (without consideration of the output lead) Operating temperature 0 to 40 C at maximum load Storage temperature - 20 to 70 C 5 % to 95 % non condensing Temperature range 0 to 70 C UP 18 FW mm 18 Watts ts 51 mm 48 mm 12 V 1500 ma 400 mv pp V 750 ma 400 mv pp Fulfils class II, SELV according to following standards: EN / IEC UP USB Watts 200,000 hours at maximum load Weight approx. 95 g (UP 6), 130 g (UP 12), 130 g (UP 18), 70 g (UP USB) AC input: 150 mm cable (UP 6, UP 12, UP 18) Spring clip 2 x 2,5 mm² (UP USB) DC output: 150 mm cable (UP 6, UP 12, UP 18) USB-socket type A (UP USB) Optional upon request: Customer-specific output voltages Customer-specific cable length 5 V 1400 ma 300 mv pp Also available without support ring mm 48 mm 32 mm 43 mm 71 mm

14 OF 65 OF Watts 5 V 1000 ma 75 mv pp 12 V 5000 ma 200 mv pp Switchmode Power Supplies Open Frame All products conform to 61558; OF 150 additional to mm 122 mm 57 mm Laboratory equipment Patient lifts Label printers Universal input 100 to 240 V AC Low standby power Measuring equipment Laser High efficiency Lighting Automation Climate chambers Electric tools Leakage current 100 µa Small package Without active fan OF 100 OF Watts Professional kitchen equipment 12 V 7500 ma 150 mv pp mm 142 mm 62 mm Input voltage 100 to 240 V AC (± 10 %) Input current 1600 ma (OF 65), 2500 ma (OF 100), 1800 ma (OF 150) 87 % typ. at full load Standby Losses 0.5 Watts typ. Conforms to EN 55011, EN / B, FCC47 part 15, EN , EN , EN , EN , EN , EN , EN , EN voltage tolerance ± 2 % Power factor 0.9 typ. OF 150 OF Watts 12 V ma 240 mv pp also available without U-bracket V 6250 ma 120 mv pp Operating temperature 0 to 70 C Storage temperature -20 to +70 C 5 % to 95 % non condensing 41.2 mm 127 mm also available without U-bracket V 3125 ma 480 mv pp also available without U-bracket Fulfils class I, SELV according to following standards: IEC 60601, UL 2601, fulfils medical application class B / BF typ. 200,000 hours at maximum load 81.6 mm Weight approx. 220 g (OF 65), 230 g (OF 100), 340 g (OF 150) Pin connector, flat-pin plug or screw terminal 26 27

15 OF 250 OF Watts 5 V 500 ma 50 mv pp 24 V ma 240 mv pp Switchmode Power Supplies Open Frame 40 mm 155 mm All products conform to 61558; OF 250 and OF 450 additional to mm Laboratory equipment Patient lifts Label printers Universal input 100 to 240 V AC Low standby power Measuring equipment Laser High efficiency Lighting Automation Climate chambers Electric tools Leakage current 100 µa Small package Without active fan OF 450 OF Watts Professional kitchen equipment 5 V 100 ma 100 mv pp 12 V 400 ma 100 mv pp V ma 240 mv pp 48 mm 185 mm 122 mm Input voltage 100 to 240 V AC (± 10 %) Input current 3500 ma (OF 250), 5500 ma (OF 450) 87 % typ. at full load Standby Losses 0.5 Watts typ. Conforms to EN 55011, EN / B, FCC47 part 15, EN , EN , EN , EN , EN , EN , EN , EN voltage tolerance ± 2 % Power factor 0.9 typ. Operating temperature 0 to 70 C Storage temperature -20 to +70 C 5 % to 95 % non condensing Fulfils class I, SELV according to following standards: IEC 60601, UL 2601, fulfils medical application class B / BF typ. 200,000 hours at maximum load Weight approx. 600 g (OF 250), 1,250 g (OF 450) Pin connector, flat-pin plug or screw terminal 28 29

16 geprüfte Sicherheit geprüfte Sicherheit geprüfte Sicherheit Li-Ion EURO USA / Jap. UK Voltage Current Cells Capacity Housing Order No. Order No. Order No. Switchmode Chargers Chargers with exchangeable primary adapters (MPP 15 and GPP 18 / 36) All products conform to IEC and IEC (not FW 7574, 7290, 7219) Medical applications Electrical vehicles Stair lifts / patient lifts Mobile lighting Cleaning machines Professional photographic technology Mobile measuring technology Starter batteries Diving lamps Universal input V AC Exchangeable primary adapters (MPP and GPP system) Low leakage current Low standby power LED charge indication Reverse polarity protection (not MPP 15 Li-Ion) 10KNTC, B = 3977 (GPP 18 / 36) : PP 8 = IU0U, MPP 15 = I0IU GPP 18 / 36 = IU0 PP 8 LiFePO 4 GPP 36 MPP 15 GPP 36 GPP mm 77 mm 30 mm PP 8 34 mm 87.5 mm 39.5 mm 52 mm GPP mm 69 mm 51.5 mm MPP 15 GPP mm GPP mm 109 mm 4.1 V 1000 ma Ah PP V 600 ma Ah PP V 1000 ma Ah PP V 600 ma Ah PP V 800 ma Ah MPP V 800 ma Ah MPP V 800 ma Ah MPP with NTC 8.4 V 800 ma Ah MPP V 800 ma Ah MPP V 800 ma Ah MPP V 3000 ma* 1 20 Ah GPP V 1500 ma* 2 20 Ah GPP V 4000 ma** Ah GPP V 3500 ma** Ah GPP V 2500 ma** Ah GPP V 2000 ma** Ah GPP V 1600 ma** Ah GPP V 1350 ma** Ah GPP Voltage Current Cells Capacity Housing Order No. 3.6 V 3000 ma* 1 20 Ah GPP V 1500 ma* 2 20 Ah GPP V 4000 ma** 1 20 Ah GPP GPP mm 7.2 V 3500 ma** 2 20 Ah GPP V 2500 ma** 3 20 Ah GPP mm 14.4 V 2000 ma** 4 20 Ah GPP V 1600 ma** 5 20 Ah GPP Input voltage 100 to 240 V (± 10%) Input current PP 8 (0,13 0,2 A), MPP 15 (0,25 0,3 A), MPP 30 (0,4 0,5 A), GPP 18 (0,2 0,4 A) GPP 36 (0,18 0,45 A) 75 % at full load Conforms to EN 55011, EN / B, FCC 47 part 15, EN , EN , EN , EN , EN , EN , EN , EN current tolerance ± 10% GPP mm 69 mm 109 mm * without NTC 1.5 A ** without NTC 1.6 A Operating temperature 0 to 40 C at maximum load Storage temperature -40 to 70 C 5 % to 95 % non condensing Fulfils class II, SELV according to following standards: IEC , IEC , UL 1310, UL ,000 hours at maximum load Product FW Type Approvals PP 8 Li-Ion MPP 15 Li-Ion GPP 18 Li-Ion GPP 36 Li-Ion FW 7574 FW 7219 FW 7290 FW 7300 Weight For primary adapters see page 34 PP 8 Li-Ion (125 g), MPP 15 (140 g), MPP 30 (278 g), GPP 18 (200 g), GPP 36 (320 g), GPP 36 7S (260 g) AC input: MPP / GPP: FRIWO exchangeable mains plug system, PP 8: Euro, USA / Japan, UK DC output: Universal output plug system (page 34) GPP 36 Li-Ion FW Cells GPP 18 LiFePO 4 FW 7290 GPP 36 LiFePO 4 FW 7300 Charge voltage can be adjusted for specific cell packs. Please observe battery specification

17 geprüfte Sicherheit geprüfte Sicherheit geprüfte Sicherheit NiCd / NiMH Switch-off criteria Capacity Current Cells Housing TI TG -DU Order No. 34 mm 39 mm 68 mm Ah 950 ma MPP Switchmode Chargers Chargers with exchangeable primary adapters (MPP 15 / 30 and GPP 18 / 36) All products conform to IEC and IEC (not FW 7304, 7219, 7290) MPP 15 MPP 30 GPP mm 51.5 mm MPP mm 85 mm 45.5 mm MPP mm 10 mm 105 mm 109 mm Ah 1000 ma MPP Ah 1400 ma 8 12 MPP Ah 2000 ma 5 6 MPP Ah 800 ma 4 10 MPP Ah 800 ma 4 10 MPP Ah A* 2 6 GPP Ah A** 2 12 GPP Switch-off criteria: TI = time, TG = T. grad, -DU = -Delta-U Medical applications Electrical vehicles Stair lifts / patient lifts Mobile lighting Cleaning machines Professional photographic technology Mobile measuring technology Starter batteries Diving lamps Universal input V AC Exchangeable primary adapters (MPP and GPP system) Low leakage current Low standby power LED charge indication Reverse polarity protection (not PP 8 Pb) 10KNTC, B = 3977 : Pb = IU0U Pb GPP 36 PP 8 52 mm GPP mm GPP 36 * without NTC 1.5 A ** without NTC 1.6 A Voltage Current Cells Capacity Housing Order No. 6 V 900 ma Ah PP 8 EU V 900 ma Ah PP 8 UK MPP mm 74 mm 87.5 mm 6 V 900 ma Ah PP 8 US V 1600 ma Ah MPP V 3000 ma Ah MPP mm 51.5 mm 12 V 500 ma Ah PP 8 EU Input voltage 100 to 240 V (± 10%), Input current PP 8 ( A), MPP 15 ( A), MPP 30 ( A), GPP 18 ( A) GPP 36 ( A) 75 % at full load Conforms to EN 55011, EN / B, FCC 47 part 15, EN , EN , EN , EN , EN , EN , EN current tolerance ± 10% MPP 30 PP 8 Euro 39 mm MPP mm MPP mm 105 mm 12 V 500 ma Ah PP 8 US V 1000 ma Ah MPP V 2000 ma Ah MPP V 500 ma Ah MPP V 1000 ma Ah MPP V 1500 ma Ah MPP Operating temperature 0 to 40 C at maximum load Storage temperature -40 to 70 C 5 % to 95 % non condensing Product FW Type Approvals Fulfils class II, SELV according to following standards: IEC (NiCd / NiMH only MPP 15) IEC , UL 1310, UL (only Li-Ion), VDE, CE label, CSA MPP 15 NiCd / NiMH MPP 30 NiCd / NiMH FW 7219 FW ,000 hours resp. 100,000 hours (NiCd / NiMh) at maximum load GPP 18 NiCd / NiMH GPP 36 NiCd / NiMH FW 7290 FW 7300 Weight approx. PP 8 Li-Ion (125 g), MPP 15 (140 g), MPP 30 (278 g), GPP 18 (200 g) GPP 36 (320 g) AC input: MPP / GPP: FRIWO exchangeable mains plug system, PP 8: Euro, USA / Japan, UK DC output: Universal output plug system (page 34) PP 8 Lead Acid MPP 15 Lead Acid FW 7118 FW 7218 MPP 30 FW 7318 Charge voltage can be adjusted for specific cell packs. Lead Acid For primary adapters see page 34 Please observe battery specification

18 Primary adapters GPP system Primary adapter Country GPP Order No. EURO mm 39 mm UK USA / Japan Accessories EURO UK mm Australia IEC Korea Argentina mm 34.9 mm IEC India China Brazil USA / Japan Australia South Africa Primary adapters The MPP/GPP line is available with countryspecific mains plugs. The products are therefore universally applicable. Not only do the plugs enhance mobility and reliability of the corresponding product, they even facilitate the management of the country versions of power supplies and chargers. In countries with other mains plug types, the IEC adapter with the 2-pin IEC 320 C8 socket provides a standardized alternative. Primary adapters MPP system 39 mm EURO 32 mm UK Primary adapter MPP Country Order No. EURO UK USA / Japan Australia MPP Australia MPP 6 / mm IEC Korea mm 28.3 mm IEC Brazil China USA / Japan Australia Secondary adapters All standard units come with a round lead of 1.83 m length and our approved secondary adapter system. Depending on the required output voltage, the wire diameter is between 0.25 mm² (AWG30) and 1,31 mm² (AWG16). FRIWO also offers a broad range of secondary output plugs, including coaxial plugs (acc. to DIN 45323) and jack plugs (acc. to DIN 45318). Polarity is adjustable by reversing connector. Customer-specific leads are also an option. If necessary, customer-specific flat or round leads can be fitted. Special versions as well as types and dimensions of low voltage plugs are available too. Secondary adapters Straight coaxial connectors Angled coaxial connectors Straight jack connectors Connectors / Sockets Ø out. Ø in. Length mm Order No. Ø out. Ø in. Length mm Order No. Ø out. Length mm Order No. Desription Order No Texas connector Straight Texas connector Angled Texas connector Angled jack connectors Texas sockets 2-pin Snap in type PCB type Texas sockets 3-pin Snap in type DIN DIN PCB type Power cords Power cords with 2 contact IEC 320 C7 mains plug provide a specific solution for each country. All power cords are 2 m of length and can be used with our IEC 320 CB socket for the MPP/GPP and DT lines. Power cords USA / Japan Australia EURO UK Power cords Country Order No. EURO UK USA / Japan Australia mm 2000 mm 2000 mm 2000 mm China

19 MADE IN GERMANY LT UP FW / 20 Watts Model Order No. voltage* current* water proof LT10-12 UP VDC ma LT10-24 UP VDC ma LT10-36 UP VDC ma LED Drivers Standard Range 25 mm 35 mm 48 mm LT10-36/300 UP VDC ma LT20-24 UP VDC ma LT20-31 UP VDC ma LT20-36/600 UP VDC ma All products comply with EN and EN LT 10 UP LT 20 UP 51 mm 1 without DIMMbox connection Lighting Voltage and current regulation within single design Compact design: 21 x 30 mm (LT 10 LT 60), 24 x 30 mm (LT 100) Active PFC LT 40 Overload protection Overtemperature protection Fastening by screws, rivets, cable straps or clips LED dimmable with DALI, 1-10V or Push-Dim via connectable DIMMbox IP rating: IP20, IP67 (LT-UP, LT 40 WP) LT 10 LT mm 21 mm 10 Watts Model Order No. voltage* current* LT VDC ma LT VDC ma LT VDC ma LT VDC ma LT10-32 DB VDC ma LT10-36/ VDC ma Input voltage 100 to 120 V AC 220 to 240 V AC Input current 150 ma (LT 10 UP), 200 ma (LT 20 UP), 90 ma (LT 10), 200 ma (LT 20), 180 ma (LT 40) up to 91% typ. at full load Conforms to EN 55012, EN , EN 62384, EN voltage tolerance ± 2% LT 20 LT mm 20 Watts Model Order No. voltage* 1 without DIMMbox connection current* Operating temperature -20 to +45 C at maximum load Storage temperature -40 to +70 C 5% to 90% non condensing Fulfils class II, SELV according to following standards: EN / IEC , EN / IEC typ. 200,000 hours at maximum load Weight approx. 90 g (LT 10 UP), 125 g (LT 20 UP), 50 g (LT 10), 82 g (LT 20), 106 g (LT 40) connecting bracket mm² 153 mm 30 mm 21 mm LT VDC ma LT VDC ma LT20-28/ V VDC ma LT20-36/ VDC ma LT VDC ma LT VDC ma LT20-40/ V VDC ma LT VDC ma LT VDC ma LT VDC ma LT20-48/ V VDC ma LT Accessories LT 40 LT Watts Model Order No. voltage* current* LT SQ Cap Order No for LT 40 SQ, LT 60 SQ LT Cap Order No for LT 10, LT 20, LT 40, LT 60, LT 100 and DIMMbox LT Cap slim Order No for LT 10, LT 20, LT 40, LT 60, LT 100 and DIMMbox 188 mm 21 mm 30 mm LT VDC ma LT VDC ma LT40-24/ V VDC ma LT VDC ma LT VDC ma LT40-36/ VDC ma LT40-36/ V VDC ma LT VDC ma LT V VDC ma 36 * Standard units will be delivered with highest voltage and current output. 37

20 MADE IN LED Drivers Standard Range All products comply with EN and EN GERMANY LT 40 WP LT 40 WP 40 Watts Model Order No. water proof 200 mm 30 mm 21 mm voltage* current* LT40-24 WP VDC ma LT40-36 WP VDC ma LT40-48 WP VDC ma 1 without DIMMbox connection Lighting Voltage and current regulation within single design Compact design: 21 x 30 mm (LT 10 LT 60), 24 x 30 mm (LT 100) Active PFC LT 40 Overload protection Overtemperature protection Fastening by screws, rivets, cable straps or clips LED dimmable with DALI, 1-10V or Push-Dim via connectable DIMMbox IP rating: IP20, IP67 (LT-UP, LT 40 WP) LT 40 SQ LT 40 SQ 40 Watts Model Order No. 60 mm 21 mm voltage* current* LT40-24 SQ VDC ma LT40-36 SQ VDC ma LT40-48 SQ VDC ma Input voltage 100 to 120 V AC 220 to 240 V AC Input current 180 ma (LT 40 WP), 300 ma (LT 60), 450 ma (LT 60 SQ), 700 ma (LT 60 SQ US) up to 91% typ. at full load Conforms to EN 55012, EN , EN 62384, EN voltage tolerance ± 2% Operating temperature -20 to +45 C at maximum load Storage temperature -40 to +70 C 5% to 90% non condensing Fulfils class II, SELV according to following standards: EN / IEC , EN / IEC typ. 200,000 hours at maximum load Weight approx. 200 g (LT 40 WP), 130 g (LT 60), 150 g (LT 60 SQ), 160 g (LT 60 SQ US) connecting bracket mm² LT 60 LT Watts Model Order No. 100 mm 240 mm 30 mm 21 mm voltage* current* LT VDC ma LT VDC ma LT VDC ma LT VDC ma LT VDC ma LT V WR VDC ma LT V VDC ma LT V VDC ma 1 wide range input V AC, LT 100 housing LT Accessories LT 60 SQ LT 60 SQ 60 Watts Model Order No. voltage* current* LT SQ Cap Order No for LT 40 SQ, LT 60 SQ LT Cap Order No for LT 10, LT 20, LT 40, LT 60, LT 100 and DIMMbox LT Cap slim Order No for LT 10, LT 20, LT 40, LT 60, LT 100 and DIMMbox 130 mm 60 mm 21 mm LT60-24 SQ VDC ma LT60-36 SQ VDC ma LT60-36 SQ VDC ma LT60-36 SQ VDC ma LT60-36 SQ US VDC ma LT60-36 SQ US VDC ma LT60-48 SQ VDC ma 38 * Standard units will be delivered with highest voltage and current output. 39

21 MADE IN GERMANY LT 60 DPA LT 60 DPA 60 Watts Model Order No. voltage* current* LED Drivers Standard Range 100 mm 30 mm LT60 DPA VDC ma current adjustable by customer incl. DALI, Push-Dim and 1-10V All products comply with EN and EN mm Lighting Voltage and current regulation within single design Compact design: 21 x 30 mm (LT 10 LT 60), 24 x 30 mm (LT 100) Active PFC LT 40 Overload protection Overtemperature protection Fastening by screws, rivets, cable straps or clips LED dimmable with DALI, 1-10V or Push-Dim via connectable DIMMbox IP rating: IP20, IP67 (LT-UP, LT 40 WP) LT 100 LT Watts 30 mm 24 mm Model Order No. voltage* current* LT VDC ma LT VDC ma LT VDC ma LT V VDC ma LT V VDC ma Input voltage 100 to 120 V AC 220 to 240 V AC Input current 325 to 300 ma (LT 60 DPA), 480 ma (LT 100), 0 to 5A (DIMMbox) up to 91% typ. at full load Conforms to EN 55012, EN , EN 62384, EN voltage tolerance ± 2% DIMMbox DIMMbox 305 mm Model Order No. voltage* current* Operating temperature -20 to +45 C at maximum load Storage temperature -40 to +70 C 5% to 90% non condensing Fulfils class II, SELV according to following standards: EN / IEC , EN / IEC typ. 200,000 hours at maximum load Weight approx. 200 g (LT 40 WP), 130 g (LT 60), 150 g (LT 60 SQ), 160 g (LT 60 SQ US) connecting bracket mm² 153 mm 30 mm 21 mm DIMMbox VDC ma DIMMbox 1-10 OFF VDC ma DIMMbox CV VDC ma Functional description The DIMMbox and the connected LED(s) are powered by the power supply/ LED driver at the input of the DIMMbox. The dimming function is achieved by pulse width modulation control (PWM) at the LED minus output. Switching frequency is around 600Hz. DIMMbox: control range % DIMMbox 1-10 OFF: control range %, at an interface voltage between 1 10 V/< 0,7 V = off DIMMbox CV: control range %, at an interface voltage between 1 10 V LT Accessories LS 12 Light Control LS 12 Model Order No. voltage* current* LT SQ Cap Order No for LT 40 SQ, LT 60 SQ LS12/100 DPA ± 1 VDC 100 ma LT Cap Order No for LT 10, LT 20, LT 40, LT 60, LT 100 and DIMMbox LT Cap slim Order No for LT 10, LT 20, LT 40, LT 60, LT 100 and DIMMbox 153 mm 30 mm 21 mm Functional description The light control is a converter for light control signals. An extended 1 10 V interface serves as output. For input DALI, PUSH-DIM, a PWM signal or a 1 10 V dimmer can be chosen. The output is synchronized with the FRIWO LED drivers and their integrated 1 10 V interface. 40 * Standard units will be delivered with highest voltage and current output. 41

22 E²MS Excellence in Engineering & Electronic Manufacturing Services Quality in good hands: Manufacturing Engineering Systems & Processes Contract manufacturing of electronic systems and PCBs in form of sheer servicing. Services Setup of concept and specification Setup of requirement specification Acceptance of defined R&D services Definition and capture of requirements Acceptance of system engineering services FRIWO is your competent partner for the implementation and development of visions and ideas up to series production of your electronic systems. From PCB assembly, production of entire units and worldwide shipping with E²MS FRIWO offers a service platform that allows you to focus on your core business and competencies. We support you throughout the entire value chain: from engineering and prototyping through purchasing and manufacturing and ultimately approval assistance. FRIWO s lead and competence factory Ostbevern, certified in accordance with DIN EN ISO 9001 and TS 16949, handles the initial production of products by means of modern manufacturing processes (auto assembly, AOI, selective soldering, X-ray, etc...). Ostbevern Short distances between R&D and production allow innovative production techniques and streamlined processes, which can also be pursued and implemented after a subsequent shift to our global manufacturing locations. This leads to short lead times and consistently high quality, enabling us to support you in accelerating the market introduction of your products. In case of unplanned or unexpected market developments we are able to respond flexibly with our fast-line production. Through constant follow-up and continuous improvement of process technology in all areas of manufacturing, we ensure high quality at optimized costs and maximize your business success in the market. Global purchasing of PCBs and components Design and implementation of testing concepts Logistics and global distribution 2nd Source Manufacturing of excess demands Quota management Avoidance of dependencies Project management General entrepreneurship, exploration and coordination of external engineering partners for special requirements, i.e. explosion protection level optimization and harmonization Support for certification and approval Design, specification and implementation of production processes for projects and systems FRIWO E²MS Short routes, same time zone, same language quick response = quality in good hands E2MS@friwo.de 42 43

23 Glossary Battery type Lead Acid NiCd NiMH Li-Ion LiFePO 4 cobalt manganese Office / IT Medical Tools, chargers, toys, household appliances Surge Burst Cell voltage 2.0 V 1.2 V 1.2 V 3.6 resp. 3.7 V 3.3 V Energy density [Wh / kg] EU EN EN EN EN61000 / EN55014 EN EN USA UL UL UL 1310 / E60335 / UL 697 FCC 47 part 15 / EN61000 EN EN Self-discharge ratio per month 5 % 20 % 30 % 2 5 % 2 5 % Overload tolerance high moderate low very low very low Canada C22.2 No C22.2 No M90 C22.2 No.223-M91 C22.2 No.173-M1983 (Toys) FCC 47 part 15 / EN61000 EN EN Charging cycles Charging method U = const. I = const. I = const U = const. China GB4943 GB GB4706 GB GB / T GB / T Phase 1: Charging characteristic IU0U, IUIa I0I I0I IUa IUa Phase 1: Charging criteria: Phase 1: Short circuit proof constant current -dv, dt / dt, du / dt, T max constant current constant current The ability of electrical equipment to function satisfactorily Short circuit proof means that a temporary short circuit can be Phase 2: Phase 2: Phase 2: Identification and control in its electromagnetic environment without negative interferences. Power supplies should meet at least two generic absorbed without damage. constant voltage constant voltage constant voltage via microcontroller ± 1 % tolerance ± 1 % tolerance Phase 3: standards for : Single range trickle charge Power supplies with single input voltage for the use in the 1. standard for transient emissions (grid-bound interferences respective countries. emitted by the power supply) and Abbreviations Ambient temperature CPP = Customized Power Plug Temperature of inactive air which surrounds the power supply. 2. standard for interference immunity (protection against SMT It is usually measured approx. 10 mm apart from the running external interferences) SMT is a surface mount technology which allows surface DT = Desktop power supply. These generic standards comprise a multitude of sub-standards mountable components with solderable pads (without wire E 2 MS = Engineering & Electronic Manufacturing Services Class B that define threshold values for subdomains (for examp- le certain types of interferences). FRIWO power supplies meet connectors) to be soldered directly onto a PCB. GPP = Global Power Plug Protection against electric shock in due consideration of the these standards to a higher degree than required to make the Standby losses leakage current. most of, and to safeguard a trouble-free service. Power consumption of a power supply during idle service. LED = Light Emitting Diode Class BF LT = LED Driver Life-cycle Storage temperature Like B, but taking into account the so-called F parts which Temperature range in which a device may be stored (not Life-cycle of a power supply. After the end of life power MPP = Multi Power Plug may accidentally come into contact with the patient and operated) without being damaged. supplies are likely to break down because of worn components. which are isolated from other parts. OF = Open frame Sustained short circuit proof PP = Power Plug Class CF A short circuit might occur without damaging the output. As Class with the highest protection. NTC soon as the problem is solved, the output will return to normal SMT = Surface Mount Technology A temperature-sensitive resistor with negative coefficient service. UP = In-wall Current limited which reduces the resistance as temperature increases. It is Electronic overload protection which limits the maximum therefore also called thermistor. It serves not only the temperature THT USB = Universal Serial Bus output current to a preset value. monitoring but also limits the inrush current of power supplies. Stands for through-hole technology. Wired components are connected to the PCB by vias and connected by a special THT soldering process. Cell chemistries is calculated as the ratio of output to input power Operating temperature and is always smaller than 1. To reduce the power loss under Voltage controlled Li-Ion = Lithium Ion Temperature of still air surrounding the device. It is usually the given load prerequisites, the maximum efficiency ratio is A control loop in the power supply stabilizes the output voltage, independent of all factors (e.g. temperature). measured approx. 10 mm next to the operated device. LiFePO 4 = Lithium Iron Phosphate aspired. For a power supply it is measured at full load and at nominal input. The difference between input and output is NiCd = Nickel Cadmium transposed into heat, hence each increase of the efficiency ratio Overvoltage resistance Wide range NiMH = Nickel Metal Hydride means less thermal stress on the components and there fore a A circuitry within the power supplies monitors the output. If Power supplies with wide range input can be operated at life-cycle increase. Even a minor improvement of the efficiency a preset threshold value is exceeded, the power supply will be different nominal voltages without having to be adjusted Pb = Lead Acid ratio can have a dramatic impact on the life-cycle. turned off. (manually or automatically)