G4500 SERIES READY FOR THE FUTURE

Transcription

1 # Number 01 MAGAZINE recieved the King Willem I Award GIANT all over the world Expansion in Oisterwijk th GIANT 11 produced Page Page Page Page ENGLISH EDITION // COPIES PIECES // G4500 SERIES READY FOR THE FUTURE

2 FOREWORD READY FOR THE FUTURE! So much has happened within throughout the past few years and there were many highlights, and within the coming years there are still many changes to look forward to. In this new magazine there is a lot to read about the most important events of the past years and various future plans. One of the highlights that really stands out was winning the King Willem I Award for Best SME of the Netherlands in It was incredibly special to receive this award from Queen Máxima. This price was proof that we are doing things right as a company, because this award was not possible without our employees and dealers. As a reward for the hard work, Queen Máxima visited the factory in Oisterwijk, June A group photo of all staff with the queen made this a day to never forget. This proves that we are doing things right as a company. Due to the continuous demand for, our production has increased rapidly in the recent years. Our goal is to build at least 4,500 machines in 2020 and we will achieve that goal for sure. Therefore, the coming years we will invest in a new and modern facility and expansion of the current factory. First, the Research & Development Centre and sales department will move to a new location in Oisterwijk. This property will accommodate all the technical features that are necessary to develop new and innovative products. will invest in and focus on cleaner stage V diesel engines and electrically driven machines in the coming years. Besides this new building, the production will be expanded step by step at the current location. In total the production facility will be increased by 8,000 m 2 and will be divided over two storeys to make optimal use of the available space. There will also be the new and modern production lines that run LEAN. For the storage of parts for production and service, a high-rise warehouse of 16 meters high will be built. An automation system controls the entire logistics process and ensures that the right numbers are picked up from the warehouse. Ready for the future. All investments in buildings, personnel and new machines will ensure that is ready for the future. Together with a large team of enthusiastic employees, machines are developed and built that meet all the wishes and requirements of customers worldwide. Enjoy reading the new magazine! Toine and Caroline Brock TIMELINE SINCE TOBROCO is founded in Haaren, Netherlands by the current owner / director Toine Brock. The production of construction and agricultural machines begins at his parents home in their stable Moved to new production facility in Oisterwijk, Netherlands Developed the first GIANT telescopic wheel loader. Developed the first GIANT wheel loader. 02

3 TOBROCO MACHINES BECOMES TOBROCO Machines has grown rapidly in recent years and the number of GIANT machines produced is growing just as fast. We produced and delivered the 15,000th machine in February this year. Also, the international dealer network is expanding and our machines are available in more than 40 countries worldwide. Now that TOBROCO Machines is becoming a global player on the market, there was the need for an international brand name. indicates the relationship between the manufacturer (TOBROCO Machines) and products (GIANT machinery). Furthermore, the brand name is unique and protected worldwide. NEW LOGO The new brand name has necessitated a change in the logo. The GIANT logo, as shown on the machines, has been added BY TOBROCO. In addition, an emblem has been developed in which the characteristic GIANT wheel loader is displayed. Both elements form the new logo and will be implemented in all expressions. This includes printing, websites, merchandising, ads and all other media. The characteristic ant will disappear from the logo, but will remain on the machines and various other expressions. Print and advertisements are advertised with the slogan: Compact design, BIG in performance. This clarifies the relationship between the machines and the ant. GIANT stands for Gigantic ANT because these working animals are able to carry anywhere from 10 to 50 times their body weight. READY FOR THE FUTURE With the new brand name and the new logo, there is uniformity in the corporate style. In addition, can grow internationally as a brand and raise awareness for its machines. USA KICKS OFF GIANT machines are currently sold in over 40 countries around the world. America is one of them and is a country with a lot of potential. At present, the market of compact loaders is dominated by skid steers, but the smaller wheel loaders are gaining popularity. More and more companies choose compact wheel loaders because of the comfort, ease of operation, fuel savings and the fact that the machines hardly damage the ground surface. Because of these developments, has taken the step of opening its own establishment in Des Moines. From this sales and service office in the state of Iowa, a team of employees has been active since October 2016 to support dealers in sales, training, service and parts. It s important to be close to customers so we can provide local support, says the company manager of USA. Participation in various events is one of the first steps to increase brand awareness and to seek dealers who recognize the increasing demand for compact (telescopic) wheel loaders. So USA participated in the ConExpo for the first time. This exhibition takes place every three years in Las Vegas and is regarded as one of the world s biggest construction equipment shows. Another wellknown event is the GIE+EXPO in Kentucky. The visitors that come here are active in landscaping and ground care. New production facility in Eger, Hungary Opening TOBROCO- GIANT USA in Des Moines, Iowa Moved to new production facility in Oisterwijk, Netherlands. Production of the th GIANT and th attachment. Winner of King Willem I Award for best SME in the Netherlands. Opening new Sales and Development facility in Oisterwijk, The Netherlands Production of the th GIANT Expansion of production facility in Oisterwijk, Netherlands. Developed the first GIANT skid steer loader. Expansion of the production facility in Oisterwijk, The Netherlands Developed the first GIANT telehandler. 03

4 LOOKING BACK ON QUEEN MAXIMA S VISIT TO MACHINES From the drawing room to the R&D center and from the sales office to the production line. Queen Máxima took her time to visit TOBROCO- GIANT in Oisterwijk, The Netherlands on Thursday, June 8th. The compact machinery manufacturer won the King Willem I Prize last year in the small and medium-sized category and could expect a royal visit as a follow up. Queen Máxima is the honorary chairman of the King Willem I Foundation. is the manufacturer of GIANT-branded compact machinery for the green industry, agriculture, construction and other applications. The company won the King Willem I Prize - the Oscar of Dutch business - by its daring, power, durability and perseverance. CEO Toine Brock gave Queen Máxima a plant tour and told about the innovations that applies to the development of new machines and in the production process. A LOOK BACK Queen Máxima was introduced to environmentally friendly machinery in the R&D center. Specifically for developing new machines, research and development center was opened in 2016 to build and test prototypes. All machines are designed and built in the modern factory in Oisterwijk. At the production line, Queen Máxima was consulted about the paperless running of this line and the routing of the machines. offers one of the broadest portfolios in the industry with a total of 36 different models in forty countries. After a demonstration on the outdoor grounds it was time for a group photo with the more than 180 employees. After the staff cheered spontaneously when Queen Máxima arrived, she took a nice spot between Toine Brock and his wife Caroline. With a broad attendance of the public and the invited press, the Queen said farewell after a one and a half hour during visit. This visit shows that our hard work has paid off, said Toine Brock after Queen Máxima was in the car. CROWNED THE BEST SME IN THE NETHERLANDS During a ceremony last evening, received the 2016 King Willem I Award in the category of Small to Medium-sized Enterprises (SMEs) from the hands of Her Majesty Queen Máxima of The Netherlands. This national entrepreneurial prize is awarded every two years since 1958 to companies which have shown outstanding entrepreneurship. The board of the King Willem I Foundation expressed its appreciation for the manner in which has developed into a manufacturer of high quality machinery and exports them worldwide. Owner and founder Toine Brock: We are very proud of this great achievement. It would not have been possible without our coworkers and dealers. Other companies that were awarded are Royal Philips N.V. in the category of Large Enterprise and Koppert Cress B.V. in the category of Sustainable Entrepreneurship. The award winners were praised during the ceremony for their courage, decisiveness, perseverance, sustainability and innovation; the features that distinguishes a great company from the good ones. Among the more than 250 attendees were many dignitaries including the President of the Dutch Central Bank, Commissioner of the King and the mayor of Eindhoven. In addition, the top of the Dutch business community was represented including previous award winners of the King Willem I prize. 04

5 INTRODUCES NEW G4500 RANGE! will reveal two machines from a complete new range during AgriTechnica. At stand A40 in hall 6, the G4500 and G4500 TELE will make their exclusive debut during the world s largest trade fair for agricultural machinery. These two models are the only two machines from a complete new range that will exist of nine models. The compact and manoeuvrable G4500 machines will become the standard for productivity, comfort and reliability. From the middle of 2018 the first machines will be delivered to customers in Europe. READY FOR THE FUTURE In mid-2016, a new Research & Development Centre was opened at the factory of TOBROCO- GIANT to develop and build new machines and options. Furthermore, the engineering department has expanded considerably so that all the knowledge is in-house to develop new machines. The G4500 series is the first product of these investments and gives a glimpse into the future of new GIANT machines. BIG IN PERFORMANCE Like all GIANT machines, the G4500 models will distinguish themselves by a high tipping load compared to their own weight. Depending on the options, the G4500 with Z-bar has a tipping load between 3,500 and 4,000 kg (measured with hinge point in lower position). For extremely heavy work there is the G4500 X-TRA. It has a lower front frame and can lift even more weight due to its low centre of gravity. Because of these features, the X-TRA models have become extremely popular for construction workers and ground care. A G4500 X-TRA has a tipping load between 3,500kg and 5,000 kg (measured with hinge point in lower position). There are three different Kubota diesel engines available for the G4500 machines. First of all, a 36 kw / 50 hp version, which is already available in various current models. In addition, two new engines are available, a 46 kw / 66 hp variant and a 54 kw / 74 hp version. Both are equipped with a catalytic converter (DOC) and soot filter (DPF) and meet the latest, Stage V, clean engine standards. The machines are developed with productivity as one of the spearheads. Whether transporting large quantities of loads or roughworking activities, the hydrostatic 4-wheel drive with automotive control (Rexroth) and 100% switchable lock on both, 16-tons, axles always provides enough grip, a lot of pulling force and smooth movement. Optionally, the driving speed can be increased to 35 km/h, which improves productivity even more. In addition, various hydraulic systems are available. The basic machine will be equipped with a direct-driven hydraulic system on the joystick, which can be extended to a servo-controlled version. A high flow version will also be available and can deliver 120 L/min to the chosen attachment. In this way, we can meet the wish of every customer. SAFETY AND COMFORT A combination of safety and comfort ensures that the operator can carry out his work in a responsible manner. The machines are standard equipped with a safety roof and this can optionally be extended to a, silent, full-option cabin. The G4500 machines have been extensively tested on safety by an independent authority and are internationally ROPS/FOPS certified. All-round visibility gives the operator an excellent view on his work and allows safe and precise operation. A comfortable working environment has been created in the cabin so long working days are no problem. The steering column is adjustable and all necessary information can easily be read from a central display. While using the joystick, the operator can rest his arm on ergonomically shaped armrest. All key functions are close to the joystick so that they can be easily operated. The articulated pendulum joint gives the G4500 machines extreme manoeuvrability, accuracy and off-road mobility. Optionally, it is possible to equip the machines with the patented Stabilo System or boom suspension. Both options provide extra safety and comfort because unevenness s are absorbed without any compromise to the performance. SOLID INVESTMENT are a solid investment because of their reliability and high productivity. Only the best components have been chosen and tested extensively before they were applied to the G4500 series. works closely with quality suppliers like Bosch Rexroth, Comer, Kubota and Hydac during the development of new machines. Performing maintenance to the machines is easy because the service points are simple to reach. By opening the hood, there is convenient access to the various filters, they can be cleaned or replaced quickly. Information about oil temperature, regeneration, power modes, etc., can be read from the dashboard so that you can always see these important data during work. THE CUSTOMER S WISHES G4500 machines can be configured according to the customers wishes. Starting with the selection for Z-bar, X-TRA or TELE model. Then there is a choice of a 50 hp, diesel engine that is Stage V ready. Also with regard to the options there are plenty of possibilities. Consider the choices for a cabin or safety roof, increased driving speed, air conditioning, additional counterweight and up to 5 doubleacting hydraulic functions at the front. This gives customers the opportunity to assemble the machine precisely for the work that needs to be done and for a competitive price. 05

6 SECTORS ONE MACHINE FOR EVERY JOB! 06 INFRASTRUCTURE AGRICULTURAL CONSTRUCTION & DEMOLITION EQUINE INDUSTRY FORESTRY GOVERNMENT & MUNICIPALITIES MATERIAL HANDLING NURSERIES WINTER SERVICE LANDSCAPING & GROUND CARE

7 MODELS E-SERIE V4502T Weight kg Lifting height mm Tipping load kg V4502T X-TRA Weight kg Lifting height mm Tipping load kg V5003 Weight kg Lifting height mm Tipping load kg V5003 X-TRA Weight kg Lifting height mm Tipping load kg SK-SERIE SK 211G Engine 21 hp / 15,5 kw Weight 750 kg Lifting height mm Tipping load 293 kg B-SERIE D263S Engine 26 hp / 19 kw Weight kg Lifting height mm Tipping load kg D-SERIE V362 Engine 36 hp / 26 kw Weight kg Lifting height mm Tipping load kg V5003 HD Weight kg Lifting height mm Tipping load kg V5003 X-TRA HD Weight kg Lifting height mm Tipping load kg SK 201D Engine 20 hp / 15 kw Weight 795 kg Lifting height mm Tipping load 293 kg SK 251D Engine 25 hp / 17,5 kw Weight 810 kg Lifting height mm Tipping load 293 kg A-SERIE D204SW Engine 20 hp / 15 kw Weight kg Lifting height mm Tipping load kg D254SW Engine 25 hp / 17,5 kw Weight kg Lifting height mm Tipping load kg A-SERIE TELE D204SW TELE Engine 20 hp / 15 kw Weight kg Lifting height mm Tipping load 900 kg D254SW TELE Engine 25 hp / 17,5 kw Weight kg Lifting height mm Tipping load 900 kg D332ST Engine 33 hp / 24 kw Weight kg Lifting height mm Tipping load kg D263SW Engine 26 hp / 19 kw Weight kg Lifting height mm Tipping load kg D332SWT Engine 33 hp / 24 kw Weight kg Lifting height mm Tipping load kg D263SW X-TRA Engine 26 hp / 19 kw Weight kg Lifting height mm Tipping load kg D332SWT X-TRA Engine 33 hp / 24 kw Weight kg Lifting height mm Tipping load kg C-SERIE D267 Engine 26 hp / 19 kw Weight kg Lifting height mm Tipping load kg D337T Engine 33 hp / 24 kw Weight kg Lifting height mm Tipping load kg D337T X-TRA Engine 33 hp / 24 kw Weight kg Lifting height mm Tipping load kg V452T Weight kg Lifting height mm Tipping load kg V452T HD Weight kg Lifting height mm Tipping load kg V452T X-TRA Weight kg Lifting height mm Tipping load kg V452T X-TRA HD Weight kg Lifting height mm Tipping load kg E-SERIE TELE V4502T TELE Weight kg Lifting height mm Tipping load kg V5003 TELE Weight kg Lifting height mm Tipping load kg V5003 TELE HD Weight kg Lifting height mm Tipping load kg G3500 G3500 Engine G4500 G4500 Engines 66 hp / 48,5 kw (Stage V ready) kg Weight Lifting height mm Tipping load kg G3500 X-TRA Engine 66 hp / 48,5 kw (Stage V ready) Weight kg Lifting height mm Tipping load kg G3500 TELE Engine 66 hp / 48,5 kw (Stage V ready) Weight kg Lifting height mm Tipping load kg 50 hp / 36 kw 74 hp / 55,4 kw (Stage V ready) Weight kg Lifting height mm Tipping load kg G4500 X-TRA Engines 50 hp / 36 kw 74 hp / 55,4 kw (Stage V ready) Weight kg Lifting height mm Tipping load kg G4500 TELE Engines 50 hp / 36 kw 74 hp / 55,4 kw (Stage V ready) Weight kg Lifting height mm Tipping load kg V-SERIE V501 Weight kg Lifting height mm Tipping load kg D761T Engine 76 hp / 55,6 kw Weight kg Lifting height mm Tipping load kg V-SERIE TELE V501 TELE Weight kg Lifting height mm Tipping load kg V761T TELE Engine 76 hp / 55,6 kw Weight kg Lifting height mm Tipping load kg T-SERIE 3648 TENDO Engine 36 hp / 26 kw Weight kg Lifting height mm Tipping load kg 4548 TENDO HD Weight kg Lifting height mm Tipping load kg 07

8 GIANT ALL OVER THE WORLD USA has made its debut at ConExpo This exhibition takes place every three years in Las Vegas and is considered to be one of the world s largest fairs in the field of construction machinery. The D254SW models are popular machines and can be found all over the world. In Canada, the loader is used at a trade fair for loading and unloading goods because the machine causes less ground damage and the underground will be spared. U.S.A. CANADA GIANT machines can be used in many segments. This V6004T is used for laying concrete slabs using a GIANT jib and vacuum unit. This is one of the last 60 hp machines delivered in Europe. The model is followed by the 66 hp G3500, which has a stage V engine. At date plantations in Saudi Arabia, telescopic loaders from are used for the inspection and maintenance of palm trees. Various wheel loaders are used to harvest the dates and to transport materials. BELGIUM SAUDI ARABIA A 4548 TENDO HD is working on a poultry farm in Ireland. The compact dimensions, high traction force and automotive control were decisive in the choice of this GIANT telehandler. With a lifting height of 4.8 meters, work can be done at high places. A plant nursery in England is very pleased with their V452T X-TRA. The quick hitch makes it easy to change attachments without stepping out of the machine. Besides that, I have excellent visibility on my work due to the low front frame, according to the owner. IRELAND ENGLAND A wood processing company in Germany has taken use of a V761T TELE. The intelligent power management system ensures optimal distribution of engine power over driving and working hydraulics. At places where tractors cannot come, a GIANT D337T is being used at an agricultural company in the Netherlands. Some of the activities are: mowing purposes, cleaning the yard and bedding cubicles. GERMANY THE NETHERLANDS SWEDEN To take care of animals, keep shelters clean and maintain the gardens, a zoo in Sweden has taken use of a D204SW. This small powerhouse was chosen because of its low weight (1,100 kg) and high tipping load (1,000 kg). AUSTRIA TOBROCO- GIANT dealer Binder Landtechnik demonstrates a V4502T at an industrial company in Austria. Due to the many options and attachments, a GIANT machine can be completely adapted to the needs of a customer. Whether it s a landscaping, agricultural or a demolition company. 08

9 EXPANSION IN OISTERWIJK has grown rapidly in recent years. Due to the continuous demand for loaders, telehandlers and skid steers as well as the introduction of new models, the demand has exceeded exceeded GIANTS expectations. For the coming years the expectations are that the demand will increase even further and therefore TOBROCO- GIANT will expand its current production facility in Oisterwijk. Impression from the new location First, Research & Development and the sales department move to a new and modern location in Oisterwijk. The newly built property will accommodate all the technical gadgets that are necessary to develop new and innovative products. will invest in cleaner stage V diesel engines and electrically powered machines in the coming years. The current location where R & D and sales are located will be added to the production site, which will result in more capacity. INCREASED PRODUCTION AREA The expansion of production at the current location will take place in different stages. In total, the production facility will be increased with 8,000 m 2 and continues to be divided over two storeys to make optimal use of the available space. There will be the new production lines that run LEAN and also the paperless production will be implemented even further. In addition, more pre-assembly will take place and will be centralised. This improves lead times and components can be transported faster to the production lines. Automation is further balanced with various suppliers. Furthermore, TOBROCO- GIANT continues to invest in welding techniques such as the 2 newly installed welding robots, bending machines and spindle machines. This will help to increase production and the optimise the quality. SMART STORAGE AND INTERNAL DISTRIBUTION For the storage of parts, production and service, a high-rise warehouse of 16 meters high will be built. The warehouse will be driven completely automatically. Incoming goods for the warehouse will be received via several new loading docks. This ensures that the parts and finished products will not cross each other anymore. Roller banks are used to transport the incoming goods to the temporary storage location where various (quality) checks take place. Some of the goods then go directly to production and a part is stored in the warehouse. Just in time delivery and maintaining high quality are the key words. Impression from the renovation plans in Oisterwijk. In order to ensure an efficient supply of parts, there has already been an investment in a new automation system. A computer system controls the entire logistics process and ensures that the right quantities are picked up from the warehouse. Electric trolleys will make various rounds on a daily basis and ensure that everything will be in the right place. During the building process the possibility for adding conveyor belts at a later stage will be taken into account. TESTIMONIAL GIANT MAKES HEAVY WORK LEIGHT! Rüdiger Triebs (left), MENGER & SANDMANN GmbH In mid-2014 the first GIANTS were sold here in the region. I saw the machines for the first time during my visit to an open day at a dealer in the Netherlands. The compact dimensions and high lifting power immediately attracted my attention. The company was founded in 1993 by Menger and Sandmann. However, since 2009, the family company is co-led by Rüdiger Triebs. Over 20 years of experience in sales and rental and maintenance of construction machinery have made it a well-known company in the Osnabrück region for everything that comes with compact machines. Menger & Sandmann specializes in de brands and Hitachi. In total, 5 employees work on customer-specific solutions on a daily basis. We support our customers in various applications. Assembling a level board or stone clamp is not a problem for us. Mechanizing as much work as possible is top priority for us and our customer. Menger & Sandmann has been selling TOBROCO- GIANT shovels to customers in construction and greenkeeping for over 3 years already. Cooperation with German importer KIESEL (construction & demolition) plays a crucial role. Due to the good communication between dealer, importer and factory, problems have been solved fast and questions are answered quickly. The forecast system allows sold machines to be delivered within 8 weeks. In addition, Menger & Sandmann always tries to have machines in stock for demonstrations or to rent them out. Another advantage of the collaboration between and Menger & Sandmann is the proximity of the modern factory in Oisterwijk. Customers that are doubting are invited for a tour. So the customer can see for themself which components are used in his machine. Because of the well-organized production line, we were able to convince many customers so far, said Rüdiger Triebs. The most popular model remains the V452T X-TRA. This is a great machine! This wheel loader has a low service weight but is extremely powerful. Lifting a pallet is no problem. In addition, the machine can be transported without a problem on a normal trailer. Rüdiger Triebs is looking forward to the new series of wheel loaders. He expects much of the G4500 class. With this machine the range is complete. The range of models is gigantic, but with this addition in the 4.5T class we can approach customers who have not been interested in us until recently. I am convinced that the new machine will be as strong, reliable and of high quality as any other model! 09

10 DEVELOPMENTS KFT IN HUNGARY SETS UP UK HEAD OFFICE has had a presence in the UK for some time and due to increasing demand GIANT has decided to set up a UK head office with a state-of-the-art showroom, workshop and parts department as well as a highly skilled sales team. Offering a range of 16 compact loaders, telehandlers and skid steers that have the ability to be transported on a trailer, they also offer over 100 attachment options making your life easier by using one machine for multiple jobs. The machines have been handpicked out of the 36 models that offers by owner Toine Brock and UK managing director, Scott Worsley. Owner, Toine Brock is excited to see the growth in the UK market: In the UK there is still a niche market for compact equipment. More owners buy compact wheel loaders because of their extreme versatility, operator friendliness and ease of use. With over 100 different attachments the machines can be used by builders, merchants, agricultural contractors and landscapers, etc. We have started UK because it is important to be close to customers so you can provide local support and professional service. Stock, spare parts and quick response is a must in these times. UK deems itself different from other compact machines due to the high-quality, reliable build, their compact design and use of the best components of Kubota, Bosch Rexroth and Comer. Already with 14 dealer networks, it is actively searching for more dealers to expand the brand further into the UK market. Since 2013, the production of frames and attachments are taking place at TOBROCO- GIANT KFT in the Eger, Hungary. There are many reasons for an own production facility in Hungary; one is because of the lower costs and the other ensures quality remains guaranteed. Another big advantage is the short distance and the flexibility. Within a few hours it is possible to visit the factory from Oisterwijk. This makes sharing knowledge and experience easy. In Hungary it is also clear that sales figures of GIANT machines and attachments have risen rapidly. In order to keep up with production, there has been a lot of investments over the past year and several investments will take place in the coming years. Already in the field of staff, there has been a considerable growth. At the start in 2013, 40 employees were active and that number has now doubled to 95 employees. Operations are optimised by introducing a software system, which is used in both the Netherlands and Hungary. Furthermore, there is a new drawing program on the agenda to simplify the development of new attachments. In the factory itself a welding robot has recently been installed. This one has been taken into use at the same time as the welding robot in the Netherlands. Both robots have the same software and can communicate with each other. This makes it possible to transcend what is being worked out in the Netherlands directly to Hungary and vice versa. In order to be able to do more in-house there will be investments in 2018 for a machine that laser cuts sheets of material. With these investments in people and machines, KFT is ready for the future! NEW X-TRA MODEL FOR D337T X-TRA Besides the standard GIANT D337, this model will now be available in the X-TRA version as well. The D337T X-TRA has a lower front frame and thus a lower centre of gravity. Resulting in excellence on the attachments and stability of the machine, as well as the biggest advantage of an increased lifting capacity. A D337T X-TRA has a tipping load of kg in comparison with kg for the standard model. The new wheel loader has a 33 hp, 3-cylinder Kubota diesel engine and is equipped with a hydraulic pump from Bosch Rexroth for smooth and powerful driving characteristics. The service weight of the machines is kg (measured with earth bucket) and the lifting height is 2.45 m. Like all GIANT machines the pendulum joint between the front and back frame is completely free from maintenance. The D337T X-TRA is driven by hydrostatic four-wheel drive with automotive control and automatic differential lock on both axles. This gives the machine a maximum driving speed of 18 km/h. The D337T X-TRA can be delivered as HD version. The Heavy Duty version will be equipped with a bigger hydraulic pump. A great advantage of this option is that the machine will have extra tractive force in its second gear. To meet with European regulations, the X-TRA model as standard is equipped with a ROPS/FOPS safety roof and safety doors. Also, optional extras include; a safety roof deluxe, foldable safety roof or cabin are available for this model. 10

11 TH GIANT ROLLS OFF THE PRODUCTION LINE and its factory in Oisterwijk, the Netherlands, reached a milestone with the 15,000th GIANT rolling off the production line last week! This exciting time was celebrated with a special ceremony where founder and owner Toine Brock handed the keys of the 15,000th machine over to Karel Beel, director of Firma Beel. Firma Beel is one of GIANT s first dealers and has sold GIANT machines in Belgium since After years of their dedication and hard work, Firme Beel have become the exclusive importer of GIANT machinery for Belgium since 2011 and for France since STRONG GROWTH The first GIANT wheel loader was produced in 2001 and since then the demand for has increased rapidly. Because of this demand and the expansion of the range with telescopic loaders and telehandlers, TOBROCO- GIANT produced the 10,000th machine in In 2016 the company has recorded a seventh consecutive year of annual sales growth as manufactures of GIANT machinery. This growth was achieved by the introduction of new models such as skid steer loaders and the expansion of its worldwide dealer network. The increased sales have meant a 50% rise in produced machines within three years as last week the 15,000th GIANT rolled off the production line. TESTIMONIAL BROUWERS GROENAANNEMERS; PASSION FOR LANDSCAPING! From De Moer in The Netherlands, Brouwers Groenaannemers has been active in the field of landscaping since From design to implementation and from advice to managing ground care, infrastructure and green work. Over the years, Brouwers Groenaannemers has grown to a full-service agency with 90 employees. These activities are carried out for governments, companies, you and I and institutions. This includes renovating gardens around hospitals, weed control at companies and tree safety checks for municipalities. advice. Due to changes in the legislation, clients ask for the knowledge of Brouwers Groenaannemers. Ronald: Nature and biodiversity law is a very specific knowledge and often clients don t have enough experience with these laws. They like to know how the work can be done without damage to the protected plant and animal species. SOLID AND POWERFUL Facility Manager Jeroen Brouwers spoke about the choice of machines offer. In 2012 we were looking for a new loader. From various companies in the market we heard that GIANT machines are very solid. This was important to us because it may occur that someone else is working with the machine every day. We chose a D332SWT X-TRA because of its compact size, high tractive force and lifting power. Ronald emphasises the choice for and explains where the machine is used: For the construction and maintenance of semi-hardening paths or small-scale projects, the machine is perfect. For example, to install steps in private gardens or to supply and remove materials around hospitals. In places where there is little space, we can still fit our GIANT machines. Where somebody can go with a buggy, we can go there as well! Brouwers Groenaannemers is so pleased with their loader that they have purchased a second GIANT. The V452T X-TRA HD they chose as its one class bigger but can still be transported on a trailer. We have a broad group of customers and just as many appealing projects. Think of the Efteling (one of the largest them parks in Europe), where we were responsible for the creation of the gardens around the various attractions like Symbolica and Baron 1898, says director Ronald Kusters. In the recent years there has been an increasing demand for ecological and tree technical 11

12 MERCHANDISING merchandising via COUNTRIES WITH GIANT DEALERS NETHERLANDS R&D Centre Engineering Production Sales office Training Centre HUNGARY Production USA Independent Sales office Industrielaan 2, 5061 KC Oisterwijk (Netherlands) Tel.: +31 (0) Fax: +31 (0) Internet: