Department of condition monitoring in 2016
|
|
|
- Hope Palmer
- 5 years ago
- Views:
Transcription
1 Department of condition monitoring in 2016 Ivan Mazůrek Institute of Machine and Industrial Design Faculty of Mechanical Engineering Brno University of Technology Seminar IMID 18th January 2017
2 Contents Chain of command Scientific sections Laboratory improvement Publications Research results Sources of finance Projects Seminar IMID 2 / 18
3 Chain of command Vibro-acoustics brigade Non-destructive testing brigade Brigade commander Brigade commander Employees Employees PhD students PhD students Seminar IMID 3 / 18
4 Scientific sections MR technology Vibro-acoustics Automotive suspension diagnostics Non-destructive testing Seminar IMID 4 / 18
5 Laboratory in A3/114 modernization Seminar IMID 5 / 18
6 Publications KLAPKA, M.; MAZŮREK, I.; MACHÁČEK, O.; KUBÍK, M. Twilight of the EUSAMA diagnostic methodology. MECCANICA, 2016, p ISSN: VLAŠIC, F.; KRATOCHVÍLOVÁ, V.; MAZAL, P.; PALOUŠEK, D.; KOUTNÝ, D. Fatigue Damage of Aluminium Alloy EN AW 2618A Produced by SLM Technology. In World PM2016 Proceedings European Powder Metallurgy Associtation, p ISBN: CHLADA, M.; NOHÁL, L.; PŘEVOROVSKÝ, Z. Condition Monitoring of Thrust Ball bearings using Continuous AE. In 32nd Eropean Conference on Acoustic Emission Testing - Proceedings p ISBN: MAHMOUD, H.; VLAŠIC, F.; MAZAL, P.; JÁNA, M. Damage identification of pneumatic components by acoustic emission. In 32nd European Conference on Acoustic Emission Testing, p ISBN: KRATOCHVÍLOVÁ, V.; VLAŠIC, F.; MAZAL, P. Study of fatique processes of selective laser melting and conventional produced materials. In 32nd European Conference on Acoustic Emission Testing p ISBN: KUBÍK, M.; MACHÁČEK, O.; MAZŮREK, I. A study of hydraulic resistance of viscous bypass gap in magnetorheological damper. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 2016, vol. 64, no. 4, p ISSN: MAZAL, P.; VLAŠIC, F.; MAHMOUD, H. Use of Acoustic Emission Method for Diagnosis of Damage of Pneumatic Cylinders. The e- Journal of Nondestructive Testing, 2016, vol. 2016, no. 1, p ISSN: MAZAL, P.; VLAŠIC, F.; MAHMOUD, H.; JANA, M. The Use of Acoustic Emission Method for Diagnosis of Damage of Pneumatic Cylinders. In 19th WCNDT World Conference on NDT. Munchen, Germany: German Society for NDT, p ISBN: KLAPKA, M.; MAZŮREK, I.; MACHÁČEK, O. Analysis of causes of false-negative evaluation of EUSAMA metodology for suspension asessment. In Engineering mechanics Prague: p ISBN: STRECKER, Z.; ČÍPEK, P.; ROUPEC, J.; MACHÁČEK, O.; KUBÍK, M. Testing of Car Suspension With Fast MR Damper, Controlled by Modified Groundhook Algorithm. In Engineering Mechanics p ISBN: ISSN: KUBÍK, M.; MACHÁČEK, O.; STRECKER, Z.; ROUPEC, J.; MAZŮREK, I. Hydraulic resistance of magnetorheological damper viscous bypass gap. In Engineering Mechanics p ISBN: ISSN: ROUPEC, J.; MAZŮREK, I.; STRECKER, Z.; KUBÍK, M.; MACHÁČEK, O. Temperature dependence of magnetorheological fluid yield stress and Bingham viscosity. In Engineering Mechanics p ISBN: ISSN: Seminar IMID 6 / 18
7 Research results National patent: Bypass rheometer for testing properties of magnetorheological liquids and data analysis method Flow curves of MRHCCS4-A at magnetic field of 70 ka/m with linear approximation (detail) Seminar IMID 7 / 18
8 Research results National patent: Measuring method of attenuation constant of unsprung mass of passenger car half-axle using disassembly-free tester Seminar IMID 8 / 18
9 Capital sources Launched and continuing projects in 2016 GAČR Development of advanced materials utilizing method of laser sintering (Mazal) TAČR Alfa Generational innovation of method for vehicle damping testing (Mazůrek) TAČR Alfa New system diagnostics of pneumatic and hydraulic components (Mazal) TAČR Gama The design of mobile tester for suspension based on EUSAMA (Klapka) ESA Semi-Active Damping System FLLP 3 (Mazůrek) MPO Trio Continuous acoustic emission analyzer for diagnosing corrosion and erosion creep damage piping systems (Mazal) Seminar IMID 9 / 18
10 New projects New projects in 2017 GAČR Studies on Magnetorheological Fluid Behavior in Slit-flow Rheometer at High Shear Rates and Unsteady Flow (Roupec) GAČR Studies on Magnetorheological Fluid with High Sedimentation Stability (Strecker) TAČR Epsilon Electronic car suspension tester (Mazůrek) TAČR Epsilon Research and development of design and technology of the new generation of spherical roller trust bearings (Mazal) MPO Trio2 Developement of Magnetorheological Damping System with Fast Response for Railway Vehicles (Mazůrek) ESA Semi-Active Damping System FLLP 3 2nd stage of project for launcher Arianne 6 (Mazůrek) HS Škoda Auto Testing of operation of the unsynchronized toothed clutch (Mazůrek) Seminar IMID 10 / 18
11 Testing of shock absorbers for the public (project TAČR) 116 cars was tested and evaluated by the three student teams Seminar IMID 11 / 18
12 Development magnetic circuit MR damper Delphi AUDI TT 2009 Seminar IMID 12 / 18
13 Development magnetic circuit MR damper Steel 11SMn39 Seminar IMID 13 / 18
14 Development magnetic circuit MR damper Seminar IMID 14 / 18
15 Development magnetic circuit MR damper SMC (soft magnetic composite) Sintex Seminar IMID 15 / 18
16 Development magnetic circuit MR damper BWI Range Rover 2016 Seminar IMID 16 / 18
17 Overview of HS HS Development of the testing rig for belt tensioner dampers German Motor Parts CZ s.r.o. Brno; currently pending, estimated completion in February 2017, estimated income about ,- (Klapka, Dvořáček and students of our specialization) Testing rig for evaluation of dampers equipped in belt tensioners. Seminar IMID 17 / 18
18 Seminar IMID 18 / 18
19 Thank you for attention Ivan Mazůrek
Department of condition monitoring in 2017
Department of condition monitoring in 2017 Ivan Mazůrek Institute of Machine and Industrial Design Faculty of Mechanical Engineering Brno University of Technology Brno, January 2018 CONTENTS Chain of command
Research group Technical diagnostic in 2012 I. Mazůrek
I. Mazůrek Technical diagnostics team Education: Konstruování strojů 6KM+T Diplomový konstrukční seminář YDS Elektronika a měření ZEM Diagnostické systémy ZDI Monitorování a analýza dat 0MA Mitsuoka Kit
A STUDY OF HYDRAULIC RESISTANCE OF VISCOUS BYPASS GAP IN MAGNETORHEOLOGICAL DAMPER
ACTA UNIVERSITATIS AGRICULTURAE ET SILVICULTURAE MENDELIANAE BRUNENSIS Volume 64 134 Number 4, 2016 http://dx.doi.org/10.11118/actaun201664041199 A STUDY OF HYDRAULIC RESISTANCE OF VISCOUS BYPASS GAP IN
Magnetorheological suspension damper for space application
Magnetorheological suspension damper for space application Ing. Michal Kubík Supervisors Doc. Ing. Ivan Mazůrek, CSc. Ing. Jakub Roupec, Ph.D. Institute of Machine and Industrial Design Faculty of Mechanical
Possibilities of the damage diagnostics of gearboxes and bearings with acoustic emissions method
18 th World Conference on Nondestructive Testing, 16-20 April 2012, Durban, South Africa Possibilities of the damage diagnostics of gearboxes and bearings with acoustic emissions method Pavel MAZAL 1,
Diagnosis of Pneumatic Cylinders Using Acoustic Emission Methods
Diagnosis of Pneumatic Cylinders Using Acoustic Emission Methods Ing. Houssam Mahmoud, PhD student Supervisor: doc. Ing. Pavel Mazal, CSc. Institute of Machine and Industrial Design Faculty of Mechanical
Magneto Rheological Semi-Active Damper with External By-pass Circuit in Modular Structure
ANALELE UNIVERSITĂłII EFTIMIE MURGU REŞIłA ANUL XVII, NR. 2, 2010, ISSN 1453-7397 Alexandru Boltoşi, Cristina OpriŃescu, Amalia łîrdea Magneto Rheological Semi-Active Damper with External By-pass Circuit
1576. Development of a variable-damping magnetorheological damper with multiple poles
1576. Development of a variable-damping magnetorheological damper with multiple poles Yaojung Shiao 1, Wen-Hwar Kuo 2, Quang-Anh Nguyen 3, Chao-Wei Lai 4 1, 3, 4 Department of Vehicle Engineering, National
MODELING, TESTING AND EVALUATION OF MAGNETO-RHEOLOGICAL SHOCK ABSORBER
Int. J. Mech. Eng. & Rob. Res. 2013 Ashwani Kumar and S K Mangal, 2013 Research Paper ISSN 2278 0149 www.ijmerr.com Vol. 2, No. 1, January 2013 2013 IJMERR. All Rights Reserved MODELING, TESTING AND EVALUATION
CORRELATION BETWEEN THE CONTROL CURRENT AND THE DAMPING EFFECT FOR MAGNETO RHEOLOGICAL SHOCK ABSORBERS
U.P.B. Sci. Bull., Series D, Vol. 77, Iss. 4, 2015 ISSN 1454-2358 CORRELATION BETWEEN THE CONTROL CURRENT AND THE DAMPING EFFECT FOR MAGNETO RHEOLOGICAL SHOCK ABSORBERS Alexandru DOBRE 1, Constantin CĂLINOIU
Experimental Investigation of Effects of Shock Absorber Mounting Angle on Damping Characterstics
Experimental Investigation of Effects of Shock Absorber Mounting Angle on Damping Characterstics Tanmay P. Dobhada Tushar S. Dhaspatil Prof. S S Hirmukhe Mauli P. Khapale Abstract: A shock absorber is
Modern suspension systems for automotive vehicles and their test methods
Modern suspension systems for automotive vehicles and their test methods Łukasz Konieczny 1, Rafał Burdzik 2 Silesian University of Technology, Faculty of Transport, Gliwice, Poland 1 Corresponding author
MAGNETORHEOLOGICAL FLUID DAMPER WITH EXTERNAL MAGNETIC CIRCUIT. Alexandru Boltosi, Adrian Chiriac, Liviu Bereteu, Ramona Nagy, Voichiţa Hule
Analele Universităţii de Vest din Timişoara Vol. LII, 2008 Seria Fizică MAGNETORHEOLOGICAL FLUID DAMPER WITH EXTERNAL MAGNETIC CIRCUIT Alexandru Boltosi, Adrian Chiriac, Liviu Bereteu, Ramona Nagy, Voichiţa
CRANKSHAFT. Preceding Works: Removal of end cover Removal of pistons Removal of crankshaft sprocket
30 02 CRANKSHAFT Preceding Works: Removal of end cover Removal of pistons Removal of crankshaft sprocket 1. Crankshaft main bearing shells, upper 2. Upper thrust bearing 3. Crankshaft 4. Crankshaft main
OPTIMIZATION STUDIES OF ENGINE FRICTION EUROPEAN GT CONFERENCE FRANKFURT/MAIN, OCTOBER 8TH, 2018
OPTIMIZATION STUDIES OF ENGINE FRICTION EUROPEAN GT CONFERENCE FRANKFURT/MAIN, OCTOBER 8TH, 2018 M.Sc. Oleg Krecker, PhD candidate, BMW B.Eng. Christoph Hiltner, Master s student, Affiliation BMW AGENDA
Experimental Investigation of Using MR Fluids in Automobiles Suspension Systems
Research Journal of Applied Sciences, Engineering and Technology 2(2): 159-163, 2010 ISSN: 2040-7467 Maxwell Scientific Organization, 2010 Submitted Date: February 04, 2010 Accepted Date: February 17,
Research on vibration reduction of multiple parallel gear shafts with ISFD
Research on vibration reduction of multiple parallel gear shafts with ISFD Kaihua Lu 1, Lidong He 2, Wei Yan 3 Beijing Key Laboratory of Health Monitoring and Self-Recovery for High-End Mechanical Equipment,
Design of a frictionless magnetorheological damper with a high dynamic force range
Research Article Design of a frictionless magnetorheological damper with a high dynamic force range Advances in Mechanical Engineering 2019, Vol. 11(3) 1 8 Ó The Author(s) 2019 DOI: 10.1177/1687814019827440
OILS DEGRADATION IN AGRICULTURAL MACHINERY
ACTA UNIVERSITATIS AGRICULTURAE ET SILVICULTURAE MENDELIANAE BRUNENSIS Volume LXI 143 Number 5, 2013 http://dx.doi.org/10.11118/actaun201361051297 OILS DEGRADATION IN AGRICULTURAL MACHINERY Vojtěch Kumbár,
Scientific Journal of Silesian University of Technology. Series Transport Zeszyty Naukowe Politechniki Śląskiej. Seria Transport
Scientific Journal of Silesian University of Technology. Series Transport Zeszyty Naukowe Politechniki Śląskiej. Seria Transport Volume 91 2016 p-issn: 0209-3324 e-issn: 2450-1549 DOI: 10.20858/sjsutst.2016.91.11
Chapter 2. Background
Chapter 2 Background The purpose of this chapter is to provide the necessary background for this research. This chapter will first discuss the tradeoffs associated with typical passive single-degreeof-freedom
Load Analysis and Multi Body Dynamics Analysis of Connecting Rod in Single Cylinder 4 Stroke Engine
IJSRD - International Journal for Scientific Research & Development Vol. 3, Issue 08, 2015 ISSN (online): 2321-0613 Load Analysis and Multi Body Dynamics Analysis of Connecting Rod in Single Cylinder 4
Research on Damping Characteristics of Magneto-rheological Damper Used in Vehicle Seat Suspension
International Symposium on Computers & Informatics (ISCI 215) Research on Damping Characteristics of Magneto-rheological Damper Used in Vehicle Seat Suspension Farong Kou, Qinyu Sun,Pan Liu College of
Detection and evaluation of rail defects with nondestructive
19 th World Conference on Non-Destructive Testing 2016 Detection and evaluation of rail defects with nondestructive testing methods Anika DEY 1, Jochen KURZ 2, Lukasz TENCZYNSKI 3 1 DB Systemtechnik GmbH
V. M. Traders was founded in the year 1982 as the name responsible for wholesaling, manufacturing, trading and retailing of Industrial Bearings.
+91-8048075942 V. M. Traders https://www.indiamart.com/vm-traders/ V. M. Traders was founded in the year 1982 as the name responsible for wholesaling, manufacturing, trading and retailing of Industrial
Design and analysis of shock absorber using FEA tool
International Journal of Engineering Research and Development e-issn: 2278-067X, p-issn: 2278-800X, www.ijerd.com Volume 10, Issue 2 (February 2014), PP.22-28 Design and analysis of shock absorber using
Effect of surface texturing on friction under starved lubrication conditions
Effect of surface texturing on friction under starved lubrication conditions FADI ALI SUPERVISOR: prof. Ing. Martin Hartl, Ph.D. Institute of Machine and Industrial Design Department of Machine Design
SEEDED FAULT DETECTION ON SPUR GEARS WITH ACOUSTIC EMISSION
More info about this article: h Czech Society for Nondestructive Testing 32 nd European Conference on Acoustic Emission Testing Prague, Czech Republic, September 07-09, 2016 SEEDED FAULT DETECTION ON SPUR
Test Bench Trials of the Electromagnetic Regenerative Shock Absorber
Test Bench Trials of the Electromagnetic Regenerative Shock Absorber Kireev A.V. 1,a, Kozhemyaka N.M. 1,b, Burdugov A.S. 1,c and Klimov A.V. 2,d 1 Scientific and Technical Center PRIVOD-N, Novocherkassk
AC : MAGNETO-RHEOLOGICAL FLUIDS REVOLUTIONIZING POWER AND CONTROL SYSTEMS
AC 2007-300: MAGNETO-RHEOLOGICAL FLUIDS REVOLUTIONIZING POWER AND CONTROL SYSTEMS John Marshall, University of Southern Maine JOHN MARSHALL received his Ph.D. from Texas A&M University and is the Internship
The Shock Absorber Handbook Second Edition
The Shock Absorber Handbook Second Edition John C. Dixon, Ph.D, F.I.Mech.E., F.R.Ae.S. Senior Lecturer in Engineering Mechanics The Open University, Great Britain IICIUTIHHIIL BICINTINNIIM. John Wiley
Turbostroje 2015 Návrh spojení vysokotlaké a nízkotlaké turbíny. Turbomachinery 2015, Design of HP and LP turbine connection
Turbostroje 2015 Turbostroje 2015 Návrh spojení vysokotlaké a nízkotlaké turbíny Turbomachinery 2015, Design of HP and LP turbine connection J. Hrabovský 1, J. Klíma 2, V. Prokop 3, M. Komárek 4 Abstract:
Delux Bearings Limited. Inspiring EVERY Movement
Delux Bearings Limited Inspiring EVERY Movement Clutch Release Bearings King Pin Bearings Steering Bearings Delux Bearings Ltd Leading supplier for Clutch release Bearings, King Pin Bearings, Thrust &
Chapter 32: Principles of Active Vibration Control: Magneto-rheological fluids
Chapter 32: Principles of Active Vibration Control: Magneto-rheological fluids Introduction: A magneto-rheological fluid (MR fluid) is a type of smart fluid in a carrier fluid, usually a type of oil. When
Simulation of a Narrow Gauge Vehicle using SIMPACK, Model Validation using Scaled Prototypes on Roller-Rig
Simulation of a Narrow Gauge Vehicle using SIMPACK, Model Validation using Scaled Prototypes on Roller-Rig Politecnico di Torino Dipartimento di Meccanica N. Bosso, A.Gugliotta, A. Somà Blue Engineering
Effects of Container Size, Stroke and Frequency on Damping Properties of a Damper Using a Steel Particle Assemblage
Advanced Experimental Mechanics, Vol.1 (2016), 105-110 Copyright C 2016 JSEM Effects of Container Size, Stroke and Frequency on Damping Properties of a Damper Using a Steel Particle Assemblage Yasushi
Marine and Outdoor Power Equipment Technician Level 2
Level 2 Unit: B2 Trade Mathematics II Level: Two Duration: 16 hours Theory: Practical: 16 hours 0 hours Overview: This unit is designed to provide the apprentice with the knowledge and ability to apply
ACCREDITATION PROFESSIONAL TECHNICAL PROGRAM OUTCOMES
ACCREDITATION PROFESSIONAL TECHNICAL PROGRAM OUTCOMES Automotive Technology All Student outcomes meet or exceed NATEF (ASE) requirements General Service Technician Certificate 1. Identify and properly
XXIII Konferencja Naukowa POJAZDY SZYNOWE 2018
XXIII Konferencja Naukowa POJAZDY SZYNOWE 2018 Abstract Modeling of Dynamic Aspects of Operation Railway Vehicle Traction Drive System Including the Electromechanical Coupling Robert Konowrocki Institute
Study of briquette properties at their long-time storage
JOURNAL OF FOREST SCIENCE, 59, 2013 (3): 101 106 Study of briquette properties at their long-time storage M. Brožek Faculty of Engineering, Czech University of Life Sciences Prague, Prague, Czech Republic
Optimal design of a double coil magnetorheological fluid damper with various piston profiles
11 th World Congress on Structural and Multidisciplinary Optimisation 07 th -12 th, June 2015, Sydney Australia Optimal design of a double coil magnetorheological fluid damper with various piston profiles
EFFECTIVENESS OF THE ACTIVE PNEUMATIC SUSPENSION OF THE OPERATOR S SEAT OF THE MOBILE MACHINE IN DEPEND OF THE VIBRATION REDUCTION STRATEGIES
Journal of KONES Powertrain and Transport, Vol. 25, No. 3 2018 EFFECTIVENESS OF THE ACTIVE PNEUMATIC SUSPENSION OF THE OPERATOR S SEAT OF THE MOBILE MACHINE IN DEPEND OF THE VIBRATION REDUCTION STRATEGIES
Technical elements for minimising of vibration effects in special vehicles
Technical elements for minimising of vibration effects in special vehicles Tomasz Ostrowski 1, Paulina Nogowczyk 2, Rafał Burdzik 3, Łukasz Konieczny 4 1, 2 SZCZĘŚNIAK Pojazdy Specjalne Sp. z o.o., Bestwińska
THE INFLUENCE OF THE WHEEL CONICITY ON THE HUNTING MOTION CRITICAL SPEED OF THE HIGH SPEED RAILWAY WHEELSET WITH ELASTIC JOINTS
THE INFLUENCE OF THE WHEEL CONICITY ON THE HUNTING MOTION CRITICAL SPEED OF THE HIGH SPEED RAILWAY WHEELSET WITH ELASTIC JOINTS DANIEL BALDOVIN 1, SIMONA BALDOVIN 2 Abstract. The axle hunting is a coupled
REDUCTION IN THE IMPACT FORCE ON A VEHICLE USING SPRING DAMPER SYSTEM
REDUCTION IN THE IMPACT FORCE ON A VEHICLE USING SPRING DAMPER SYSTEM Bairy Srinivas M.Tech, NATIONAL INSTITUTE OF TECHNOLOGY, WARANGAL Srinivasbairy31@gmail.com and 9542942090 Abstract In the design of
ALWAYS ON THE SAFE SIDE
ALWAYS ON THE SAFE SIDE ZF TEST SYSTEMS FOR TIRES ZF TEST SYSTEMS FOR TIRES TIRE CHARACTERISTICS: FROM LOW TO HIGH FORCES Tires and wheels are the most delicate and most severely stressed parts of a vehicle.
Featured Articles Utilization of AI in the Railway Sector Case Study of Energy Efficiency in Railway Operations
128 Hitachi Review Vol. 65 (2016), No. 6 Featured Articles Utilization of AI in the Railway Sector Case Study of Energy Efficiency in Railway Operations Ryo Furutani Fumiya Kudo Norihiko Moriwaki, Ph.D.
Design and Analysis of suspension system components
Design and Analysis of suspension system components Manohar Gade 1, Rayees Shaikh 2, Deepak Bijamwar 3, Shubham Jambale 4, Vikram Kulkarni 5 1 Student, Department of Mechanical Engineering, D Y Patil college
EXCESSIVE ADDITIVE EFFECT ON ENGINE OIL VISCOSITY
ACTA UNIVERSITATIS AGRICULTURAE ET SILVICULTURAE MENDELIANAE BRUNENSIS Volume 62 105 Number 5, 2014 http://dx.doi.org/10.11118/actaun201462051015 EXCESSIVE ADDITIVE EFFECT ON ENGINE OIL VISCOSITY Vojtěch
International Industrial Informatics and Computer Engineering Conference (IIICEC 2015)
International Industrial Informatics and Computer Engineering Conference (IIICEC 2015) Research of Solenoid Valve CDC Damper Performance Data Compression and Fusion with Active Suspension Control Strategy
Control and Simulation of Semi-Active Suspension System using PID Controller for Automobiles under LABVIEW Simulink
International Journal of Current Engineering and Technology E-ISSN 2277 4106, P-ISSN 2347 5161 2017 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet Research Article Control
COMPARING THE HYDRAULIC CONTROL OF TRACTOR THREE-POINT HITCH
ACTA UNIVERSITATIS AGRICULTURAE ET SILVICULTURAE MENDELIANAE BRUNENSIS Volume 62 96 Number 5, 2014 http://dx.doi.org/10.11118/actaun201462050939 COMPARING THE HYDRAULIC CONTROL OF TRACTOR THREE-POINT HITCH
APPLIED MECHANICS 40/50
APPLIED MECHANICS 40/50 Description (Combined Course- 2 periods) Applied Mechanics 40 introduces students to automobile servicing and the maintenance/repair field. Work is performed on operational vehicles.
Design & Testing of Telescopic Shock Absorber by Finite Element Analysis
Design & Testing of Telescopic Shock Absorber by Finite Element Analysis Mr. Tushar K. Shinde Mr. Vishrut T. Nasre Mr. Akshay W. Thakare Mr. Ashok S. Rathod Abstract In this paper, design parameters and
Eddy current braking experiment using brake disc from aluminium series of Al6061 and Al7075
Eddy current braking experiment using brake disc from aluminium series of Al61 and Al75 M Z Baharom 1,2,a, M Z Nuawi 1,b, G Priyandoko 2,c and S M Harris 1,d 1 Department of Mechanic and Material, Universiti
A NEW METHODOLOGY FOR DETECTION OF A LOOSE OR WORN BALL JOINTS USED IN VEHICLES SUSPENSION SYSTEM
Proceedings of the 7th International Conference on Mechanics and Materials in Design Albufeira/Portugal 11-15 June 2017. Editors J.F. Silva Gomes and S.A. Meguid. Publ. INEGI/FEUP (2017) PAPER REF: 6658
S.C. " RULMENTI" S.A. GROUP BARLAD -ROMANIA. Cylindrical roller bearings for railway axleboxes WJ + WJP design
S.C. " RULMENTI" S.A. GROUP BARLAD -ROMANIA Cylindrical roller bearings for railway axleboxes WJ + WJP design WJ+WJP 120/240 TNC4 and WJ 130/240 TNC4 bearings 1. Description Double-cylindrical roller bearings
High-voltage Direct Inverter Applied to Induced Draft Fan Motor at Takehara Thermal Power Station No. 3 of Electric Power Development Co., Ltd.
Hitachi Review Vol. 53 (2004), No. 3 121 High-voltage Direct Inverter Applied to Induced Draft Fan Motor at Takehara Thermal Power Station No. 3 of Electric Power Development Co., Ltd. Hiroaki Yamada Kiyoshi
Influence of Parameter Variations on System Identification of Full Car Model
Influence of Parameter Variations on System Identification of Full Car Model Fengchun Sun, an Cui Abstract The car model is used extensively in the system identification of a vehicle suspension system
Research Group, Universiti Tun Hussein Onn Malaysia, Batu Pahat, Johor, Malaysia
Condition Monitoring of Variable Speed Worm Gearbox Lubricated With Different Viscosity Oils Maznan Ismon 1,2,a, Izzuddin Zaman 1,2,b and Mohd Imran Ghazali 1 1 Faculty of Mechanical and Manufacturing
BOSCH Parts & Bytes in the Independent Aftermarket - Drive for Service Excellence in China
BOSCH Parts & Bytes in the Independent Aftermarket - Drive for Service Excellence in China Bosch Trading (Shanghai) Co., Ltd. Mr. Zheng Dazhi, General Manager 1 Overview 1. Aftermarket Worldwide and in
LESJÖFORS. Spring manufacturing since 1852.
LESJÖFORS Spring manufacturing since 1852. Global manufacturer and supplier with the market s widest range of springs, gas springs and stampings and pressings. Complete production system adjusted to customer
Magneto-Rheological (MR) Suspension Systems FOR INDUSTRIAL APPLICATIONS
Magneto-Rheological (MR) Suspension Systems FOR INDUSTRIAL APPLICATIONS Improving Operator Comfort, Health and Safety Operators of heavy machinery spend a lot of time in harsh and unpleasant vibration
A Magneto-rheological Fluid Squeeze Film Damper for Rotor Vibration Control
A Magneto-rheological Fluid Squeeze Film Damper for Rotor Vibration Control Changsheng Zhu Department of Electrical Engineering, Zhejiang University Hangzhou, 310027, Zhejiang, P. R. of China David A.
Spacecraft Valve Body 3D Printed in Titanium
Spacecraft A Case Valve Study Body from 3D SLM Printed Solutions in Titanium Spacecraft Valve Body 3D Printed in Titanium Selective Laser Melting technology applied to the aerospace and defense industry.
noise Top 10 Noise Control Techniques Top 10 Noise Control Techniques... Noise Control - Best Practice The You must control Noise at Work Regulations
Top 10 Noise Control Techniques Top 10 Noise Control Techniques..... + innovative "magic bullets" that may make you think... Low cost, DIY engineering best practice for common problems 1 fan installation
STATIC STRUCTURAL ANALYSIS AND OPTIMIZATION OF BRAKE PEDAL
STATIC STRUCTURAL ANALYSIS AND OPTIMIZATION OF BRAKE PEDAL Miss. ASHWINI N.GAWANDE 1, Prof.G.E.KONDHALKAR 2, Prof. ASHISH R.PAWAR 3 1PG Student, Design Engineering, APCOE & R, Parvati, Pune 2HOD, Mechanical
Simulation of railway track maintenance trains at MATISA
Simulation of railway track maintenance trains at MATISA MultiBody Simulation User Group Meeting Rémi ALLIOT, Solution Consultant, Dassault Systèmes SE Jacques ZUERCHER, Head of Calculation Department,
DESIGN AND ANALYSIS OF LEAF SPRING
DESIGN AND ANALYSIS OF LEAF SPRING 1 Mr. RAJA MANAS MACHERLA, 2 Mr. SRIKANTH BAJAJ 1 Bachelor of technology, Department of MECH, Mahatma Gandhi Institute of Technology, Gandipet Main Road, Kokapet, Hyderabad,
Volkswagen DCC Adaptive Chassis Control - Design and Function DCC Adaptive Chassis Control. Basics of the damping system
Volkswagen DCC Adaptive Chassis Control - Design and Function DCC Adaptive Chassis Control The rule for suspension systems has always been that increasing sportiness compromises the ride. In this new system
Semi-Active Suspension for an Automobile
Semi-Active Suspension for an Automobile Pavan Kumar.G 1 Mechanical Engineering PESIT Bangalore, India M. Sambasiva Rao 2 Mechanical Engineering PESIT Bangalore, India Abstract Handling characteristics
Study on the Controllable Characteristics of Electrorheological Valve Using Serial Multielectrode
Tamkang Journal of Science and Engineering, Vol. 12, No. 3, pp. 351 358 (2009) 351 Study on the Controllable Characteristics of Electrorheological Valve Using Serial Multielectrode W. H. Kuo 1 *, Y. C.
DIAGNOSTIC ASSESSMENT OF TECHNICAL CONDITION OF THE SHOCK ABSORBERS IN AUTOMOTIVE VEHICLES IN A SELECTED DIAGNOSTIC STATION
TEKA Kom. Mot. Energ. Roln. OL PAN, 2007, 7, 59 66 DIAGNOSTIC ASSESSMENT OF TECHNICAL CONDITION OF THE SHOCK ABSORBERS IN AUTOMOTIVE VEHICLES IN A SELECTED DIAGNOSTIC STATION Department of Computer and
Mechanical Series. Bearing Maintenance CEUs. Industrial Pneumatic Fundamentals CEUs. Industrial Hydraulic Fundamentals - 0.
Mechanical Series All industrial facilities use mechanical equipment in one form or another. Although the types of mechanical equipment can run the gamut from simple open/close valves to ultra complex
SERBIATRIB th International Conference on Tribology. Belgrade, Serbia, May 2015
Serbian Tribology Society SERBIATRIB 15 14 th International Conference on Tribology Belgrade, Serbia, 13 15 May 2015 University of Belgrade, Faculty of Mechanical Engineering NEW UNIVERSAL TRIBOMETER AS
SMART FLUID SELF ADAPTIVE DAMPER SYSTEM (SFSADS)
SMART FLUID SELF ADAPTIVE DAMPER SYSTEM (SFSADS) Santhosh Sivan. K 1, Chandrasekar Sundaram 2 and Hari Krishnan. R 3 ABSTRACT 1,2 Department of Automobile Engineering, Anna University, MIT, Chennai, India
MULTIOPERATIONAL ELECTROMAGNETIC FORMING MACHINE
MULTIOPERATIONAL ELECTROMAGNETIC FORMING MACHINE Abhishek Rane 1, Ghanshyam Pendurkar 2, Tejas Phage 3, Aniket natalkar 4, Ganesh Pednekar 5 1 Professor, SSPM s college of engineering, Kanakavli, Maharashtra,
STU Faculty of Electrical Engineering and Information Technology, Bratislava 2007
STU Faculty of Electrical Engineering and Information Technology, Bratislava DEPARTMENT OF ELECTRICAL MACHINES AND DEVICES http://www.kesp.elf.stuba.sk/ Head of Department Doc. Ing. Ľudovít Hüttner, PhD.
Defect Monitoring In Railway Wheel and Axle
IJR International Journal of Railway, pp. 1-5 The Korean Society for Railway Defect Monitoring In Railway Wheel and Axle Seok-Jin Kwon, Dong-Hyoung Lee *, and Won-Hee You * Abstract The railway system
ENHANCED ROTORDYNAMICS FOR HIGH POWER CRYOGENIC TURBINE GENERATORS
The 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery Honolulu, Hawaii, February -1, ENHANCED ROTORDYNAMICS FOR HIGH POWER CRYOGENIC TURBINE GENERATORS Joel V. Madison
Ball Screws for Aerospace Applications. Built-to-print Built-to-spec Engineering services
Ball Screws for Aerospace Applications. Built-to-print Built-to-spec Engineering services Ball Screws for Aerospace Applications. Steinmeyer develops customized solutions for many applications in the aerospace
What is model validation? Overview about DynoTRAIN WP5. O. Polach Final Meeting Frankfurt am Main, September 27, 2013
What is model validation? Overview about DynoTRAIN WP5 O. Polach Final Meeting Frankfurt am Main, September 27, 2013 Contents Introduction State-of-the-art on the railway dynamic modelling Suspension modelling
RoaDyn S635 System 2000
Force RoaDyn S635 System 2000 Wheel Force Sensor for Heavy PassCars and High Performance Sports Cars Wheel force sensor for measuring three forces and three moments on a rotating wheel; a major constituent
APPLICATION OF A NEW TYPE OF AERODYNAMIC TILTING PAD JOURNAL BEARING IN POWER GYROSCOPE
Colloquium DYNAMICS OF MACHINES 2012 Prague, February 7 8, 2011 CzechNC APPLICATION OF A NEW TYPE OF AERODYNAMIC TILTING PAD JOURNAL BEARING IN POWER GYROSCOPE Jiří Šimek Abstract: New type of aerodynamic
THE POSSIBILITIES OF EARLY FAULT DETECTION OF ENGINES
Journal of KONES Powertrain and Transport, Vol. 20, No. 4 2013 THE POSSIBILITIES OF EARLY FAULT DETECTION OF ENGINES Jan Filipczyk Silesian University of Technology, Faculty of Transport Krasinskiego Street
A REVIEW OF TWO WHEELER VEHICLES REAR SHOCK ABSORBER
A REVIEW OF TWO WHEELER VEHICLES REAR SHOCK ABSORBER Ganapati Somanna Vhanamane SVERI s College of Engineering Pandharpur, Solapur, India Dr. B. P. Ronge SVERI s College of Engineering Pandharpur, Solapur,
Design, Analysis & Balancing of 5 Cylinder Engine Crankshaft
International OPEN ACCESS Journal Of Modern Engineering Research (IJMER) Design, Analysis & Balancing of 5 Cylinder Engine Crankshaft Yogesh S. Khaladkar 1, Lalit H. Dorik 2, Gaurav M. Mahajan 3, Anil
Investigation of Semi-Active Hydro-Pneumatic Suspension for a Heavy Vehicle Based on Electro-Hydraulic Proportional Valve
World Journal of Engineering and Technology, 2017, 5, 696-706 http://www.scirp.org/journal/wjet ISSN Online: 2331-4249 ISSN Print: 2331-4222 Investigation of Semi-Active Hydro-Pneumatic Suspension for
More Precision. mainsensor Magneto-inductive displacement sensor
More Precision mainsensor Magneto-inductive displacement sensor mainsensor Magneto-inductive sensors for non-contact linear displacement measurement Measuring principle mainsensor is based on an innovative
Auto Service Technician
Auto Service Technician Organization Washburn Institute of Technology Program Number 47.0604 Instructional Level Certificate Target Population Grades 11 & 12 Post-secondary Description The Auto Service
Effect of Permanent Magnet Rotor Design on PMSM Properties
Transactions on Electrical Engineering, Vol. 1 (2012), No. 3 98 Effect of Permanent Magnet Rotor Design on PMSM Properties SEKERÁK Peter, HRABOVCOVÁ Valéria, RAFAJDUS Pavol, KALAMEN Lukáš, ONUFER Matúš
A Magneto-Rheological Clutch for Efficient Automotive Clutch
A Magneto-Rheological Clutch for Efficient Automotive Clutch Eldhose Baby 1, Johns.K.Sajan 2, JerinSaji 3,Akhil Paul 4, Arun KR 5 B. Tech Scholar, Viswajyothi College of Engineering, Vazhakulam, Kerala,
Design and Implementation of Control system for Magneto-rheological damper for vibration reduction in a cantilever beam like structures
ISSN 2395-1621 Design and Implementation of Control system for Magneto-rheological damper for vibration reduction in a cantilever beam like structures #1 Shital Rasal, #2 Sharad Kshirsagar 1 rasal_shital@rediffmail.com
Reavis High School Curriculum Snapshot/Cover Page for Auto Mechanics I
Reavis High School Curriculum Snapshot/Cover Page for Auto Mechanics I Unit 1: Safety in the Automotive Shop 8 # of The student will learn general safety in the Automotive Shop. The student will also learn
Health Monitoring of Overhead Power Transmission Line:
Vienna 26-27 January, 2004 Health Monitoring of Overhead Power Transmission Line: User Needs Dmitri SNEGOVSKI (Mech. Eng., PhD student) Transmission and Distribution of Electrical Energy University of
Design and Analysis of Arc Springs used in Dual Mass Flywheel
Volume-2, Issue-1, January-February, 2014, pp. 35-41, IASTER 2014 www.iaster.com, Online: 2347-4904, Print: 2347-8292 Design and Analysis of Arc Springs used in Dual Mass Flywheel ABSTRACT 1 Govinda, A,
China. Keywords: Electronically controled Braking System, Proportional Relay Valve, Simulation, HIL Test
Applied Mechanics and Materials Online: 2013-10-11 ISSN: 1662-7482, Vol. 437, pp 418-422 doi:10.4028/www.scientific.net/amm.437.418 2013 Trans Tech Publications, Switzerland Simulation and HIL Test for
Simulation and Analysis of Vehicle Suspension System for Different Road Profile
Simulation and Analysis of Vehicle Suspension System for Different Road Profile P.Senthil kumar 1 K.Sivakumar 2 R.Kalidas 3 1 Assistant professor, 2 Professor & Head, 3 Student Department of Mechanical
TEST STAND IN UNIVERSITY OF APPLIED SCIENCE GIESSEN FOR FRICTION FORCES MEASUREMENTS IN SLIDE BEARING USING THE ACOUSTIC EMISSION METHOD
Journal of KONES Powertrain and Transport, Vol. 15, No. 3 2008 TEST STAND IN UNIVERSITY OF APPLIED SCIENCE GIESSEN FOR FRICTION FORCES MEASUREMENTS IN SLIDE BEARING USING THE ACOUSTIC EMISSION METHOD Burkhard
STATIC AND FATIGUE ANALYSIS OF LEAF SPRING-AS A REVIEW
STATIC AND FATIGUE ANALYSIS OF LEAF SPRING-AS A REVIEW Vishal Gavali 1, Mahesh Jadhav 2, Digambar Zoman 3 1,2, 3 Mechanical Engineering Department, LGNSCOE Anjaneri Nashik,(India) ABSTRACT In engineering