Operation Manual. TX40 and CX40

Transcription

1 Operation Manual TX0 and CX0

2 Introduction Product Features... page Certification... page Installation, Operation & Maintenance.. page 8 Product Specifics... page 10 Troubleshooting... page 11 Congratulations on purchasing one of the most sophisticated hand torch available for hazardous areas. The Reference solution offers an unique solution combining multiple tasks in order to reduce the need for additional equipment, whether the intended purpose is a hand held solution, separate positioned light source, or permanent installed emergency equipment. Improved Application Induction technology eliminates conductivity problems commonly experienced with exposure to saltwater, oil, mud, and extreme weather conditions. This pattented galvanic power transfer technology furthermore enables the Reference torch to be recharged within Zone 1 gas hazardous environments, and operated under Zone 0 conditions. Reduced Maintenance Intelligent routines regularly perform specific tests on both torch and charger to monitor the system condition. Charging routines are performed at scheduled intervals to ensure optimal battery capacity, and to maintain long term durability. Increased Safety In the event of a power outage, the torch will automatically turn on and illuminate its location, making the Reference solution an important asset towards safety installations. Reference Ex and - designed for hazardous areas page 2 Reference Operation Manual page

3 Product Features Operation 1 2 Maintenance & Safety Innovative Belt Clip Improved belt clip functionality allows torch to be independently placed upright at various angles, leaving operator fully capable of performing tasks with both hands. Latest Led Technology Combined With Lens rd generation LED and the embedded º lens optimize battery utilization while producing a bright and uniform beam of light on any targeted surface area. 1 Permanent Maintenance Free Battery Solution With the sealed and self-maintained rechargeable battery feature, general maintenance cost is reduced while eliminating the need for spare parts. And Condition Indicator Intelligent routines regularly perform specific tests on both torch and charger to monitor the systems condition and report any irregularities. 2 Operation Zone 0 Certified for operation under Zone 0, 1, and 2 conditions, removing any boundary limitations for utilization within a gas hazardous environment. mm Hardened Glass mm hardened scratch resistant glass protects optical components, maintaining light intensity and beam conformity. Low Battery Indication The built in low battery procedure reduces light intensity to 0%, indicating the need for recharge and ensuring efficient utilization. Intelligent Battery Routines Scheduled charging routines and battery monitoring are performed to ensure optimal capacity and long term durability. Textured Rubber For Extra Grip Main body shaft is covered with textured rubber, ensuring a firm and comfortable grip under moist conditions such as rain, oil, mud etc. 2 Low Voltage Shutdown A low voltage shutdown procedure is automatically performed in the event of deep discharge, preventing permanent damage to internal batteries. Seal Point For Emergency Use Optional safety feature allows torch and charger to be sealed together with a securing wire, enabling application towards emergency lighting equipment. Emergency Light Activation Embedded safety routine automatically activates torch in the event of a power outage to illuminate its location. Zone 1 Certified Weatherproof Charging System Galvanic power transfer allows charging without any metallic connection, enabling torch to be recharged within Zone 1 conditions, while eliminating corrosion and other conductivity issues due to water, oil, mud etc. Attach Point For Safety Wire Firm attach point for safety wire, giving the option of securing the torch against accidental free fall while mobile. page Reference Operation Manual page

4 Certification page Reference Operation Manual page

5 Installation, Operation & Maintenance 1 Carger Mount Activation stud bolts using a torque of 1-2 Nm. forward as shown in illustration. 2 Power Connection Note: Due to the Reference torch illumination intensity, direct exposure to eyes is not recommended. ct grounding cable where applicable. rmination of the power cord must be in an ATEX certified junction box and as shown in illustration. Warning: Do not open or disassemble torch within a gas hazardous environment. Any disassembling of Reference products will affect warranty. Note: Avoid installation causing continuous exposure to direct sunlight preventing visual inspection of condition LED. Bracket Option angles to enable fixed upright lighting. Insertion of the torch must face towards the charger. General Maintenance Note: Placing metal objects between torch and charger surface may obstruct the charging process. cleaning Reference products, wipe torch and charger with soap and a clean cloth. 8 Certification Tag Condition LED approximately seconds when charging process has been initialized. operational torch. Sample: TX0 Sample: CX0 page 8 page 9

6 Product Specifics Troubleshooting Model Name Weight Measurements (mm) Power Cable Lenght Input Voltage Certification Code Area Classification (gas) TX0 CX0 00g 00g 20x0x0 18xx0 2 m V AC 0/0Hz 1.0A max II 1 G Ex ia IIC T II 2 G Ex mb II T Zones 0, 1 & 2 - Gas groups IIA, IIB, IIC Zones 1 & 2 - Gas group II Ambient Temperature -0/0ºC Ingress Protection (Ip) Light Type, Effect High efficiency LED, watts Lens Polycarbonate with spread Performance (1m) 200 lm Operation Time Recharge Time Operating Life Approx hours Approx hours (80% in 2 hours) More than 1000 recharge cycles No light produced when torch is turned on automatically lights up when inserted into charger Green LED flashes when torch is placed in charger Red LED flashes when torched is placed in charger Red LED is activated when torch is placed in charger The torch may be completely discharged. Insert torch into charger to initiate recharge process. may not receive current from its power source which results in torch activating emergency mode. Check power source, connectors, and cable for damage. Flashing green light indicates that batteries are currently being when batteries are fully recharged. Flashing red light indicates that the torch does not receive correct voltage from the charger. Check that the torch has been correctly inserted into charger, and that there is no significant buildup of mud or dirt obstructing the charging process. Continuous red light indicates an automatic maintenance test has failed. Try reinserting torch into charger. should be replaced if problem persists. In the event of any problems still present after closely reviewing the above table, or other irregularities occuring during operation and handling, please contact Reference helpdesk for support. P.O. Box 19, NO-809 Arendal Norway Phone: mail@reference.no page 10 Reference Operation Manual page 11

7 P.O. Box 19, NO-809 Arendal Norway Phone: mail@reference.no