CHAPTER 36 SPECIAL TOOLS Special Tools Illustrations and Tasks
|
|
|
- Bruce Newton
- 5 years ago
- Views:
Transcription
1 CHAPTER 36 SPECIAL TOOLS Section Title Special Tools Illustrations and Tasks Page OCT 2018 Chapter 36 Special Tools Page 36.i
2 Intentionally Blank Page 36.ii Chapter 36 Special Tools OCT 2018
3 CHAPTER 36 SPECIAL TOOLS Special Tools The following is a list of Robinson R22-series special tools. R22-series special tools are to be used in conjunction with the applicable instructions for continued airworthiness, for their designated maintenance task. OCT 2018 Chapter 36 Special Tools Page 36.1
4 36-20 Illustrations and Tasks Refer to Figure MT016-1 Engine Hoist 2 MT050-1 Main Rotor Rigging Fixture 3 MT050-2 Tail Rotor Rigging Fixture 4 MT053-1 Main Gearbox Drain Assembly Thread Type Chip Detector 5 MT054-1 Main Gearbox Drain Assembly Quick Disconnect Chip Detector 6 MT068-1 Horizontal Stabilizer Rigging Tool 7 MT091-1 Holder Engine Ring Gear (includes MT091-3 decal) 8 MT091-3 Decal (torquing instructions) FIGURE 36-1 SPECIAL TOOLS Page 36.2 Chapter 36 Special Tools OCT 2018
5 Refer to Figure MT092-1 Fan Puller (includes MT092-3 spacer) 2 MT092-3 Spacer Fan Puller 3 MT122-1 Main Rotor Hub, Bolt Elongation (teeter hinges & A154-1 hub coning hinges) 4 MT Main Rotor Hub, Bolt Elongation (B370-1 hub coning hinges) 5 MT146-1 Blocks Swashplate Rigging (set of 2) 6 MT147-1 Bleed Tool Main Rotor Blade Spindle 7 MT173-4 Socket 1-11/16 (3/4-inch drive, 12-point) 8 MT173-5 Torque Wrench Extension Tool Set (no longer available) 9 MT173-6 Tube Weldment (no longer available) 10 MT173-7 Socket 1-1/2-inch (3/4-inch drive, 12-point) 11 MT173-8 Socket 2-inch (3/4-inch drive, 12-point) FIGURE 36-2 SPECIAL TOOLS OCT 2018 Chapter 36 Special Tools Page 36.3
6 Refer to Figure MT179-4 Balancing Bar Tail Rotor Assembly Static Balance 2 MT200-1 Dial Indicator 3 MT201-1 Pressing Fixture Tail Rotor Hub Bearing 4 MT234-1 Helicopter Lifting Fixture 5 MT260-6 Tail Rotor Drive Shaft Runout Attachments Kit 6 MT294-1 Collective Spring Retainer FIGURE 36-3 SPECIAL TOOLS Page 36.4 Chapter 36 Special Tools OCT 2018
7 Refer to Figure MT295-1 Tail Rotor Gearbox Output Shaft Seal Replacement Tools (includes items 2, 3, 4, and Figure 36-9 item 5) 2 MT295-3 Punch 3 MT295-6 Screw 4 MT Mandrel 5 MT303-1 Clutch Bearing (A184) Removal and Installation Tools 6 MT303-3 Clutch Bearing (A184) Removal and Installation Tools (use with MT303-1 tools when hydraulic press is unavailable) FIGURE 36-4 SPECIAL TOOLS OCT 2018 Chapter 36 Special Tools Page 36.5
8 Refer to Figure MT329-1 Plug Assembly (A648-1 or A648-3 Bearings) 2 MT329-2 Support Weldment (A154-1 Hub) 3 MT329-8 Plug Main Rotor Hub Bearing Installation 4 MT Tube 5 MT Plug Assembly (A648-2 Bearings) 6 MT Support Weldment 7 MT331-4 Sheave Alignment Bar 8 MT352-1 Main Rotor Blade Trim Tab Gage (includes MT200-1 dial indicator) 9 MT354-1 Teeter Moment Tool (no longer available; replaced by MT354-7) 10 MT354-7 Teeter Moment Tool (R22, R44, R66) FIGURE 36-5 SPECIAL TOOLS Page 36.6 Chapter 36 Special Tools OCT 2018
9 Refer to Figure MT inch dia. Cobalt Drill Bit 2 MT inch diameter Reamer 3 MT357-4 Hex Driver (Snap-On Part No. FABL8) 4 MT357-5 Torque Adapter (Snap-On Part No. FRDH101) 5 MT357-6 Wrench (Open end; Snap-On Part No. LTA1214) 6 MT357-7 Wrench (Box end; Snap-On Part No. XDH78A) 7 MT357-8 Nipple Chuck 8 MT357-9 Taper Gage FIGURE 36-6 SPECIAL TOOLS OCT 2018 Chapter 36 Special Tools Page 36.7
10 Refer to Figure MT inch dia. Spot-Facing Tool 2 MT359-1 Spring Scale (0-30 lb) 3 MT376-1 Blocks Main Rotor Rigging (set; holds cyclic in neutral position) 4 MT526-1 Main Rotor Blade Trim Tab Bender (stainless steel skin) 5 MT526-8 Main Rotor Blade Trim Tab Bender (aluminum skin) FIGURE 36-7 SPECIAL TOOLS Page 36.8 Chapter 36 Special Tools OCT 2018
11 Refer to Figure MT556-1 Tail Rotor Elastomeric Bearing Replacement Tools (includes items 2 thru 4, and 7) 2 MT556-2 Mandrel Assembly 3 MT556-5 Support 4 MT556-6 Cap 5 MT569-1 Main Rotor Bolt Drilling Fixture (teeter hinge & A154-1 hub coning hinge bolts) 6 MT569-6 Main Rotor Bolt Drilling Fixture (B370-1 hub coning hinge bolts) 7 AN4-25A Bolt 8 AN970-4* Washer Tap Test Tool * Or 1965 or later U.S. quarter dollar coin in good condition. FIGURE 36-8 SPECIAL TOOLS OCT 2018 Chapter 36 Special Tools Page 36.9
12 Refer to Figure HR ACES Probalancer Analyzer (or equivalent dynamic balancer) Engine Operator s Manual (O-360 engine; refer to Lycoming Service Letter No. L114) Engine Operator s Manual (O-320 engine; refer to Lycoming Service Letter No. L114) 4 9HT4441 Extension Bar (3/4 square drive x 8 inch) A113 Screws (#4 x 0.75 inch) FIGURE 36-9 SPECIAL TOOLS Page Chapter 36 Special Tools OCT 2018
OR Clutch Housing Wrench Engine Hoist T-0141 Drive Pulley Alignment Tool
Enstrom Illustrated Tool Catalog Piston & Turbine Rev 5, September, 2016 T-0003 Lead Lag Nut Wrench T-0005 Damper Rod End Removal Tool T-0009 Main Rotor Blade Bolt guide Bullet T-0011 Main Rotor Hoist
Illustrated Tool Catalog Piston & Turbine
2018 Illustrated Tool Catalog Piston & Turbine PS.CAT.0018.V10 INTENTIONALLY LEFT BLANK 1 FROM: COMPANY: DATE: EMAIL: PO# BILL TO ADDRESS: SHIP TO ADDRESS: ARE 8130 TAGS REQUIRED? YES NO CONTACT NAME:
Illustrated Tool Catalog Piston & Turbine
2018 Illustrated Tool Catalog Piston & Turbine PS.CAT.0018.V10 INTENTIONALLY LEFT BLANK PS.CAT.0018.V10 1 June 18 FROM: COMPANY: DATE: EMAIL: PO# BILL TO ADDRESS: SHIP TO ADDRESS: ARE 8130 TAGS REQUIRED?
CHAPTER 64 TAIL ROTOR. Section Title Page
CHAPTER 64 TAIL ROTOR Section Title Page 64-00 Description........................................ 64.1 64-10 Tail Rotor Assembly.................................. 64.1 64-11 Static Balance..............................
CHAPTER 18 WEIGHT AND BALANCE
CHAPTER 18 WEIGHT AND BALANCE Section Title 18-10 Leveling................................................. 18.1 18-11 Leveling at Lower Right Side Frame Tube & Aft Landing Gear Cross Tube.. 18.1 18-12
CHAPTER 32 LANDING GEAR. Section Title Page
CHAPTER 32 LANDING GEAR Section Title Page 32-00 Description........................................ 32.1 32-10 Landing Gear Assembly............................... 32.1 32-20 Cross Tubes.......................................
CHAPTER 9 ROTOR SYSTEMS. Section Title Page
CHAPTER 9 ROTOR SYSTEMS Section Title Page 9.000 Rotor Systems........................................... 9.1 9.100 Main Rotor............................................. 9.1 9.110 Main Rotor Blades....................................
CHAPTER 63 MAIN ROTOR DRIVE SYSTEM. Figure Title Page 63-1 Main Rotor Gearbox and Mast Assembly Main Rotor Gearbox Installation
CHAPTER 63 MAIN ROTOR DRIVE SYSTEM Figure Title Page 63-1 Main Rotor Gearbox and Mast Assembly...................... 63.0 63-5 Main Rotor Gearbox Installation............................. 63.4 63-7 Rotor
G-LAIN - Recurring Maintenance (All)
MRB Daily inspection AD X Perform Annual inspection as per RHC R22 MM 2.400 and Lycoming OM, and CAA/LAMP/H/2007 Issue 1, First Aid Kit i.a.w. CAA/LAMP/H/2007, Issue 1, 12 MO 22-11-2016 22-11-2017 0 X
CHAPTER 8 WEIGHT AND BALANCE. Section Title Page
CHAPTER 8 WEIGHT AND BALANCE Section Title Page 8-10 Leveling.......................................... 8.1 8-11 Leveling for Weight and Balance................. 8.1 8-12 Leveling for Rigging..........................
CHAPTER 3 LIFE-LIMITED COMPONENTS
CHAPTER 3 LIFE-LIMITED COMPONENTS Section Title 3.100 Life-Limited Components..................................... 3.1 3.110 Time-in-Service Records................................... 3.1 3.120 Fatigue
CHAPTER 22 SERVICING
CHAPTER 22 SERVICING Section Title 22-10 Main Rotor Gearbox......................................... 22.1 22-11 Cleaning Chip Detector..................................... 22.3 22-12 Cleaning Sight Gage.......................................
Section 13. Tail Rotor Drive. RotorWay International A600 TALON Construction Manual. Section 13. Page A
RotorWay International Page A Tail Rotor Drive Procedures covered in this section: Install driveshafts and gearboxes; install drive belt and tensioner; fabricate and install tail rotor pitch actuator arms;
CHAPTER 9 ROTOR SYSTEMS
Section Title CHAPTER 9 ROTOR SYSTEMS 9.000 Description............................................... 9.1 9.100 Main Rotor............................................... 9.1 9.200 Tail Rotor................................................
CHAPTER 29 HYDRAULICS Description Hydraulic Pump Hydraulic Reservoir Hydraulic Servos
Section Title CHAPTER 29 HYDRAULICS 29-00 Description............................................... 29.1 29-10 Hydraulic Pump............................................ 29.1 29-20 Hydraulic Reservoir.........................................
CHAPTER 9 GROUND HANDLING. Section Title Page
CHAPTER 9 GROUND HANDLING Section Title Page 9-10 Ground Handling.................................... 9.1 9-11 Ground Handling Wheels...................... 9.1 9-12 Moving Helicopter on Ground Handling
CHAPTER 12 SERVICING. Section Title Page
CHAPTER 12 SERVICING Section Title Page 12-10 Main Rotor Gearbox.................................. 12.1 12-11 Servicing................................. 12.1 12-12 Filter Replacement...........................
PARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )
Form ZA Date 0December/G Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM). Pin. Ball Bearing. Lower End Plate. O-Ring.
CHAPTER 4 AIRWORTHINESS LIMITATIONS
Section Title CHAPTER 4 AIRWORTHINESS LIMITATIONS 4-10 Airworthiness Limitations..................................... 4.1 4-20 Additional Limitations....................................... 4.3 4-21 Parts
CHAPTER 63 MAIN ROTOR DRIVE SYSTEM
Section Title CHAPTER 63 MAIN ROTOR DRIVE SYSTEM 63-00 Description............................................... 63.1 63-10 Engine Shaft Weldment...................................... 63.1 63-11 (Engine
CHAPTER 3 LIFE-LIMITED COMPONENTS
Section Title CHAPTER 3 LIFE-LIMITED COMPONENTS 3.000 Life-Limited Components...................................... 3.1 3.001 Introduction............................................. 3.1 3.002 Time-In-Service
CHAPTER 21 ENVIRONMENT CONTROL. Section Title Page
CHAPTER 21 ENVIRONMENT CONTROL Section Title Page 21-00 Description........................................ 21.1 21-10 Ventilation........................................ 21.3 21-11 Nose Vent................................
Required Service Equipment Kit Contents
Required Service Equipment Kit Contents Part Number Description Quantity 13301 Brass Hook 1 X Service Equipment Kits 31053 40946 46126 13336 Socket Screwdriver (5/32 ) 1 X X 13337 Snap Ring Pliers (Small,
Robinson R44. Systems
Robinson R44 Systems The airframe is primarily a metal construction. The primary fuselage is welded steel tubing and riveted aluminium sheet. The tailcone is an aluminium semi-monocoque structure where
LoMax 205 CASE & 3:1 GEAR SET. Manufactured by JB CONVERSIONS, INC. Phone: Installation Instructions for the GM NP205 Transfer Case
LoMax 205 CASE & 3:1 GEAR SET Part No. 2800 Instruction Rev: 2007.08.16 Manufactured by JB CONVERSIONS, INC. Phone: Installation Instructions for the GM NP205 Transfer Case Kit Components: 1. (1) 42x25
Bearing and Seal Installation Tool T1 Clutch Assembly Stand X X X X Shift Handle Tool X X T Bearing Cup Driver X X
Bravo Sterndrive Bravo Sterndrive Tool Application Chart Part No. Description Bravo One Bravo Two Bravo Three Blackhawk 11 24156 Hex Nut 12 34961 Washer 91 12427 Shift Cable Adjustment Tool 91 17256 Bearing
1. General Description
1. General Description A: SPECIFICATION 1. MANUAL TRANSMISSION AND FRONT DIFFERENTIAL Type Transmission gear ratio Front reduction gear Rear reduction gear Front differential Center differential Final
CHAPTER 65 TAIL ROTOR DRIVE SYSTEM. Section Title Page
CHAPTER 65 TAIL ROTOR DRIVE SYSTEM Section Title Page 65-00 Description........................................ 65.1 65-10 Tail Rotor Drive Fan Shaft.............................. 65.1 65-20 Tail Rotor
CHAPTER 10 RIGGING, TRACK AND BALANCE
CHAPTER 1 RIGGING, TRACK AND BALANCE Section Title Page 1. Rigging, Track and Balance................................... 1.1 1.1 Introduction........................................... 1.1 1.2 Rod End
MD - RA. Minister s Delegates - Recreational Aviation Représentants du Ministre - Aviation de Loisir Service d Inspection
Think Safety Inspection Service MD - RA Pensons Sécurité Minister s Delegates - Recreational Aviation Représentants du Ministre - Aviation de Loisir Service d Inspection 51% Amateur Determination Checklist
SERVICE PARTS LIST 1-1/8" ROTARY HAMMER MILWAUKEE ELECTRIC TOOL CORPORATION W. LISBON RD., BROOKFIELD, WI Drwg.
00 0 200 204 276 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS PAGE 1 OF 3 BULLETIN NO.
FAA APPROVED PARTS FOR YOUR MD500
Vertical Stabilizer D, E, F AM369D23600-503 OEM 369D23600-503 Horizontal Stabilizer D: 369X23601-511 OEM 369D23601-511 E: 421X-087-905 OEM 421-087-905 F: 421X-087-903 OEM 421-087-903 Tailboom D, E, F 369X23500-505
PARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )
PARTS LIST FOR NO. SERIES AM ANGLE TOOLS Form ZA Date 0March/F Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM).
1. SUBJECT: F-28A and 280 Left Side Tail Rotor Installation
Page 1 of 16 DATE: January 31, 2005 1. SUBJECT: F-28A and 280 Left Side Tail Rotor Installation 2. MODEL: F-28A and 280 3. EFFECTIVITY: All serial numbers 4. BACKGROUND: The left side installation of the
LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES "G"
Parts Manual for LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES "G" MODEL LT160H42GBV LT160H42GBV2 LT180H48GBV2 WLT160H42GBV WLT180H48GBV2 McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS,
CHAPTER 79 ENGINE OIL SYSTEM
Section Title CHAPTER 79 ENGINE OIL SYSTEM 79-00 Description............................................... 79.1 79-10 Scroll and Fanwheel Assemblies................................ 79.3 79-11 Fanwheel-to-Inlet
Mulching and Finishing Mowers MP and FP
Mulching and Finishing Mowers MP and FP Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 Transport Wheel, Tire & Spindle MP and FP ALPHABETICAL INDEX CONTENTS PAGE 00 Hydraulic Cylinder (Rear)
Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES F MODELS LT145H33FBV LT145H38FBV ELT145H33FBV
Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES F MODELS LT145H33FBV LT145H38FBV ELT145H33FBV IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO
42515x92A Lawn Tractor (2000) Page 1 of 17 Chassis & Hood
42515x92A Lawn Tractor (2000) Page 1 of 17 Chassis & Hood 42515x92A Lawn Tractor (2000) Page 2 of 17 Chassis & Hood 1 094163 Seat 2 028X23MA Cap, Push On 3 094057MA Spring 4 26X229MA Screw 5 094160 Bolt,
LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES "G"
Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES "G" MODEL ELT145H33GBV LT145H33GBV LT145H38GBV LT150H38GKV WLT145H38GKV McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC.
SECTION 4 NORMAL PROCEDURES CONTENTS
CONTENTS Page Recommended Airspeeds....................... 4-1 Daily or Preflight Checks........................ 4-1 Before Starting Engine.......................... 4-6 Starting Engine and Run-Up......................
SAFARI Helicopter Flight Control Rigging Manual Revision 9 4/3/2010 CHR International Inc.
SAFARI Helicopter Flight Control Rigging Manual Revision 9 4/3/2010 CHR International Inc. The following procedures are meant as a guide to assist you in the safe configuration of your helicopter s Flight
drill point and thru spindle coolant systems positive mechanical depth stop
SPACEMATIC SPACEMATIC ULTRALITE ULTRALITE Model 1000II Model 2000 TM TM DRILLING MACHINES Standard Features Optional Features ergonomic design air pressure intensifier for increased thrust consistent clamp
PARTS CATALOG MODELS 320, 420, 520, 620, 820 GRAIN CART. Unverferth
Unverferth Manufacturing Company, Inc. P.O. Box 357 Kalida, Ohio 45853 (419) 532-3121 FAX (419) 532-2468 Grain Carts PARTS CATALOG MODELS 320, 420, 520, 620, 820 GRAIN CART Unverferth Manufacturing Co.,
72K850ZP PARTS MANUAL
7 2 K 8 5 0 Z P PARTS MANUAL 72 MID-CUT GAS ENGINE OPTION SECTION 72 MID-CUT DECK ASSEMBLY 72" Mid-Cut Deck Assembly # PART NO. QTY DESCRIPTION 1 582096 1 72" MC DECK WELDMENT 2 582098 1 72" DECK CHANNEL
1. SUBJECT: : New Improved Tail Rotor Teeter Bearing Assembly. 2. MODELS: F28C, 280C, F28F, 280F, 280FX, TH-28 and 480 Helicopters
SERVICE INFORMATION LETTER NO. 0141 Page 1 of 5 DATE: September 11, 1995 1. SUBJECT: : New Improved Tail Rotor Teeter Bearing Assembly 2. MODELS: F28C, 280C, F28F, 280F, 280FX, TH-28 and 480 Helicopters
21" STEEL DECK WALK BEHIND MOWER "MR" SERIES 17
Parts Manual for "MR" SERIES 17 PUSH MODELS MR216017B MR216017BV MRP216517B WMR216017B WMR216017BV WMR216517B PROPELLED MODELS MRP216017B MRP216017BV MRP216517B WMRP216017B WMRP216517B EMRP216017B EMRP216517B
1. General Description
1. General Description A: SPECIFICATIONS 1. Type Transmission gear ratio Front reduction gear Rear reduction gear 2. TRANSMISSION GEAR OIL Recommended oil Final Transfer 5-forward speeds with synchromesh
Hawk Sport. Quick Build Guide. Century Helicopter Products. Designed and Developed in USA
Hawk Sport Quick Build Guide This Century HAWK SPORT kit comes in a QUICK BUILD format that has most of the major systems already assembled into sub-assemblies. These are packed seperately into their specific
This chapter covers the location and servicing of the front brake components for the KYMCO MXU 700i and MXU 500i models.
KYMCO MXU 500i/700i Repair Manual Brake System 9.Brake System This chapter covers the location and servicing of the front brake components for the KYMCO MXU 700i and MXU 500i models. 1.Brake Discs... 9-3
CHAPTER 5 SINGLE-ROTOR POWER TRAIN SYSTEM MAIN DRIVE SHAFT FM 1-514
CHAPTER 5 SINGLE-ROTOR POWER TRAIN SYSTEM A typical single-rotor power tram system (Figure 5-1) consists of a main transmission (main gearbox), a main drive shaft, and a series of tail rotor drive shafts
CHAPTER 1 GENERAL. Section Title
Section Title CHAPTER 1 GENERAL 1.000 Introduction.............................................. 1.1 1.001 R22 Maintenance Manual Revisions............................ 1.1 1.002 R22 Maintenance Authorization...............................
21" STEEL DECK WALK BEHIND MOWER "MR" SERIES 17
Parts Manual for 21" STEEL DECK WALK BEHIND MOWER "MR" SERIES 17 PUSH MODELS MR216017B MR216017BV WMR216017B WMR216017BV WMR216517B PROPELLED MODELS MRP216017B MRP216017BV MRP216517B WMRP216017B WMRP216517B
air pressure intensifier for increased thrust consistent clamp force min to max collet spacing ergonomic design
Formerly Hi-Shear Tooling Official Distributor: SPACEMATIC Wm. Lees & Sons Ltd. United Kingdom Telephone: +44 (0) 1698 426662 Email: sales@ Website: ULTRALITE TM DRILLING MACHINES Model 1000II Standard
Drive End Bracket & Bearing. Drive End Bracket. Tandem Axle # #865733
Drive End Bracket & Bearing #865089 1 06409700 1" Lock Collar 2 865733 Drive Bracket w/ Bearing 3 310037 End Drive Shaft Drive End Bracket #865733 1 03003100 Bearing 1" w/snap Ring 2 957795 Drive End Bracket
BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 405 / 406 SECTION: 17
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 / 0 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL SEPTEMBER,
STERNDRIVE UNIT 3 B GEAR HOUSINGS MR/ALPHA ONE/ALPHA ONE SS
STERNDRIVE UNIT 3 B 23146 GEAR HOUSINGS MR/ALPHA ONE/ALPHA ONE SS Table of Contents Page Identification........................... 3B-1 Specifications.......................... 3B-1 Torque Specifications................
Hydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 0" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 0" Fabricated Cutter
CHAPTER 1 GENERAL. Section Title
Section Title CHAPTER 1 GENERAL 1-00 Introduction.............................................. 1.1 1-10 R66 Maintenance Manual Revisions.............................. 1.1 1-20 R66 Maintenance Authorization.................................
CHAPTER 13 INSTRUMENTS
CHAPTER 13 INSTRUMENTS Section Title Page 13.000 Description.............................................. 13.1 13.100 Pitot-Static System......................................... 13.3 13.200 Primary Instruments........................................
CHAPTER 10 TAIL ROTOR TABLE OF CONTENTS
CHAPTER 10 TAIL ROTOR TABLE OF CONTENTS INTRODUCTION 3 GENERAL 3 HUB ASSEMBLY 3 TRUNION 4 YOKE ASSEMBLY 4 BEARING HOUSING 5 BLADES 5 STRUCTURE 5 BLADE MAJOR PARTS 7 PITCH-CHANGE MECHANISM 7 PITCH HORNS
SECTION 4 NORMAL PROCEDURES CONTENTS
CONTENTS Page Recommended Airspeeds....................... 4-1 Daily or Preflight Checks........................ 4-1 Before Starting Engine.......................... 4-6 Engine Starting Tips...........................
20" STEEL DECK LIGHT WEIGHT (Standard & OPP) WALK BEHIND MOWERS SERIES 0
Parts Manual for (Standard & OPP) WALK BEHIND MOWERS SERIES 0 MODEL D20380 EDLW400R2 ELW400 R20400 McDonough, GA, 30253 U.S.A. COPYRIGHT 2005 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision 1, 9/22/2005
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS HPC PROOFER AND HRP RETARDER/PROOFER HPC100 ML-132156 HRP100 ML-132209 ML-132157 ML-132210 ML-132158 ML-132211 ML-132159 ML-132212 ML-132160 ML-132213 ML-132161 ML-132214 ML-132162
52 MID-CUT DECK ASSEMBLY
5 2 K 2 5 A PARTS MANUAL 52 MID-CUT SECTION 52 MID-CUT DECK ASSEMBLY 19 79 36 30 18 82 107 104 7 27 40 85 35 41 28 43 39 111 30 114 99 42 95 80 88 39 6 31 68 84 83 110 34 15 6 14 11 109 30 18 96 31 51
LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES F
Parts Manual for LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES F MODELS LT160H42FBV LT160H42FBV2 LT180H48FBV2 IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL
PARTS CATALOG MODELS 310, 410, 610, 910 GRAIN CART. Unverferth
Unverferth Manufacturing Company, Inc. P.O. Box 357 Kalida, Ohio 45853 (419) 532-3121 FAX (419) 532-2468 Grain Carts PARTS CATALOG 290901 MODELS 310, 410, 610, 910 GRAIN CART REVISED 10-12-00 Unverferth
K&T Saw Shop or
14-400030-11 MAC 100 HD 03/88 to 02/89 IPL 22276-01 Page 1 of 10 Carburetor Assembly 14-400030-11 MAC 100 HD 03/88 to 02/89 IPL 22276-01 Page 2 of 10 Carburetor Assembly 1 224142-02 1 Carburetor Asy (WT
2720/12720 PARTS MANUAL 72A SECTION FLEX WING ROTARY MOWER
0/0 This Manual applies to models 0 and 0 that use a blade pan which measures. blade hole center to blade hole center. Also blades measure 8. from hole center to blade tip. See Section if these dimensions
BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: TD-00 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE, 00
Ferrari 355 Challenge Grill Installation
Ferrari 355 Challenge Grill Installation By: Dave Lelonek (Dave Rocks) August 12, 2014 Created based on model year 1998 (355 F1 GTS), other model years may apply. Disclaimer: This document was created
72B27LD PARTS MANUAL
7 2 B 2 7 L D PARTS MANUAL 6 MID-CUT SECTION 6 MID-CUT DECK ASSEMBLY 25 24 23 26 22 00 20 9B SEE NOTE A 9A 75 34 6 2 87 98 05 03 2 90 2 68 53 93 02 69 5 49 5 7 8 0 0 9 36 88 8 58 97 3 46 59 3 72 92 76
TWIN ROTARY RAKE PARTS BOOK MODEL
TWIN ROTARY RAKE PARTS BOOK MODEL 2650 17.01135 This parts book is furnished for your convenience only. All parts must be purchased through an authorized dealer. Call us for a dealer near you. Issue Date:
30500x92A Lawn Tractor (1998) Page 1 of 13 Body Chassis
30500x92A Lawn Tractor (1998) Page 1 of 13 Body Chassis 30500x92A Lawn Tractor (1998) Page 2 of 13 Body Chassis 1 092387 Seat 2 056516E700 Hinge, Seat 3 028X64 Retainer 4 018X16 Lockwasher 5 001X45 Bolt,
126in Quadfloat Mower Groundsmaster 455 D
Form No. 3326-597 126in Quadfloat Mower Groundsmaster 455 D Model No. 30402 210000001 and Up Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number, the quantity,
25 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower
MMZ 2, 260 2 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower ILLUSTRATED PARTS LIST " Float Cutter Deck - Figure 1 3 1 27 32 17 6 1 11 31 36 3 19 7 23 1 33 38 18 37 22 3 20 2 10 2 12 21 30 39
52100x92A Garden Tractor (1999) Page 1 of 25 Blade Drive
52100x92A Garden Tractor (1999) Page 1 of 25 Blade Drive 52100x92A Garden Tractor (1999) Page 2 of 25 Blade Drive 1 094607E700 Cover, Right Pulley 2 26X250MA Screw 3 015X84MA Nut 4 037X92MA Belt, Secondary
DRIVE AXLE Volvo 960 DESCRIPTION & OPERATION AXLE IDENTIFICATION DRIVE AXLES Volvo Differentials & Axle Shafts
DRIVE AXLE 1994 Volvo 960 1994 DRIVE AXLES Volvo Differentials & Axle Shafts 960 DESCRIPTION & OPERATION All 960 station wagon models use type 1041 rear axle assembly. All 960 4-door models use type 1045
Main Components Early Style
Pipe & Bolt Threading Machine Main Components Early Style * * 0 0 0 0 0 Service Notes: Ref. No.. Do not substitute bolt longer than / inches. Severe damage to Rear Bearing will result. Ref. No.. To assure
FORM NO REV A WHEEL HORSE. 52 DECK Intl. Model No & Up. Parts Catalog
FORM NO. 3318 380 REV A WHEEL HORSE 52 DECK Intl Model No. 78252 6900001 & Up Parts Catalog 3318 380A ORDERING REPLACEMENT PARTS To order replacement parts, please supply: the part number, the quantity,
INSTALL MANUAL. FOR ON LINE ORDERING- E Commerce Visit Our Website
INSTALL MANUAL FOR ON LINE ORDERING- E Commerce Visit Our Website WWW.PRESSUREGUARD.COM Contact Information Technical Support: Chris@pressureguard.com Sales Support: Sales@pressureguard.com By Phone: 615-227-6024
RIGGING THE FLIGHT CONTROLS
RIGGING THE FLIGHT CONTROLS Rigging refers to the installation and adjustment of the rods that move flight surfaces in response to inputs from the controls of the helicopter. These rods are cut to length,
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MINI RACK OVEN OV310G ML-132515 A product of BAXTER MFG. CO., INC. 19220 STATE ROUTE 162 EAST, ORTING, WA 98360 FORM 43242 (October 2011) Table of Contents 3 ADVANCED CONTROL
ATTENTION ADVANCE SERVICE BULLETIN INFORMATION
SUBJECT: NO: 21-10-98 Loss Of Fifth Gear GROUP: Transmission EFFECTIVE DATE: Sep. 11, 1998 CHRYSLER MAIL MANAGEMENT SYSTEM DATE: AUG. 28, 1998 ATTENTION ADVANCE SERVICE BULLETIN INFORMATION The following
ON-THE-VEHICLE BRAKE LATHE
800 ON-THE-VEHICLE BRAKE LATHE Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for ease
All low rate dampers are functionally the same but should not be used in mixed sets
SERVICE INFORMATION LETTER 0075A Supercedes Service Information Letter 0075 Page 1 of 9 Date: November 20, 1980 Subject: Model: Effectivity: Main Rotor Blade Damper F-28A, F-28C, 280, 280C Not Applicable
Quadfloat 126 For Groundsmaster 455D
Form No. 3324 134 Quadfloat 126 For Groundsmaster 455D Model No. 30402 200000201 and Up Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number, the quantity,
SECTION 7 SYSTEMS DESCRIPTION CONTENTS
CONTENTS Page General..................................... 7-1 Rotor Systems................................ 7-2 Drive System................................. 7-2 Powerplant..................................
ALL PLANT & MIN TILL DRILL
4000 SERIES ALL PLANT & MIN TILL DRILL OWNER S MANUAL ADDENDUM OPERATION MAINTENANCE REPAIR PARTS #608869 (03-08) 2 Table of Contents Precision Planting Metering System 5-9 Precision Planting Introduction
LP Spare parts list. Duplex roller. s/n BGF Engine: Hatz 1D Construction Tools EOOD No
LP 6505 Spare parts list Duplex roller s/n BGF000001- Engine: Hatz 1D 42 2015 Construction Tools EOOD No. 9800163701 2015-07 F1700C Spare parts list General information This spare parts list applies to
BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 3414 SECTION: 67
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL July, 0 ROTARY
Tooling & Accessories
Tooling & Accessories For Jet Engine Applications Balancing Tooling Precision accuracy and efficient floor to floor time can only be realized if the machine and tooling are carefully designed for the
LAND MAINTENANCE REPAIR PARTS MANUAL BUSH HOG MODEL: 307 SECTION: 16
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SECTION: P.O. Box 0 Selma, AL 0-0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL SEPTEMBER, 0
SECTION 2 - VISI-COMBO FOOD, 39 VCF
AMS Glass Front Merchandiser, Models VCB and VCF SECTION 2 - VISI-COMBO FOOD, 39 VCF MERCHANDISER PARTS PAGE.5 HELIX TRAY PARTS 2.2 BOTTLE TRAY PARTS 2.4 CABINET AND ADDITIONAL PARTS 2.6 CABINET COVERS
48" and 52" Hyflo TM Un-Assembled Fans Assembly Manual
48" and 52" Hyflo TM Un-Assembled Fans Assembly Manual The employees of Chore-Time Equipment would like to thank your for your recent Chore-Time purchase. If a problem should arise, your Chore-Time distributor
Illustrated Parts List
Illustrated Parts List. Ordering Parts For your convenience, replacement parts and accessories can be ordered from ARPAC by fax 24 hours a day. Please have the following information available to ensure
Inspection and Verification, Ranger
file://c:\tso\tsocache\vdtom_5368\svk~us~en~file=svk53a03.htm~gen~ref.htm Page 1 of 1 Section 05-03A: Wheel Hubs and Bearings, Front Wheels, 4- Wheel Drive DIAGNOSIS AND TESTING 1997 Ranger 4x4 with Dana
HANDLEBAR AND CONSOLE ASSEMBLY
Section 6 Parts List HANDLEBAR AND CONSOLE ASSEMBLY 4 33 47 4 49 7 3 78 4 97 46 44 37 38 37 48 39 35 36 34 7 3 4 5 45 4 3 4 0 33 9 96 80 6 300 84 9 5 30 4 9 30 4 3 43 97 0 43 3 68 9 9 Models 753B, F753B
kit contents trail-safe samurai inner axle seal suzuki samurai (all engines) InstalLation Instructions
InstalLation Instructions trail-safe samurai inner axle seal 300748-3-kit 1986-1995 suzuki samurai (all engines) kit contents 5356 PINE AVE FRESNO, CA 93727 USA TOLL FREE: 877.4X4.TOYS WORLDWIDE: 559.252.4950
DISASSEMBLY. Transmission. 2. Remove the 4 clutch housing bolts. Separate the clutch housing from the transmission.
308-03A-1 DISASSEMBLY Transmission 308-03A-1 Special Tool(s) Puller, Bearing 205-D064 (D84L-1123-A) or equivalent Remover/Installer, Front Wheel Hub 204-069 (T81P-1104-C) 2. Remove the 4 clutch housing