The No.1 Lined Ball Valve In The World

Transcription

1 T O M C The No. Lined Ball Valve In The World NEW Lined Sampling Valves, page 0 For Top Performance, Reliability nd Safety Quality System Certificate Bulletin V-0c (E)

2 V-0 (US) pp-3 //0 4:3 PM Page 3 Dan K. Snelson V-0 Disk : T O M C KH3 Standard Port and KH Full Port Valves F lowserve is the world s leader in the design and manufacture of corrosion Lockout standard on KH3. Positive stem seal. PTFE chevron packing provides stem seal integrity while maintaining low turning torque. nti-blowout stem assembly prevents stem blowout even in the event of top works disassembly. resistant fluoropolymer lined valves. tomac valves provide bubble-tight shutoff, low maintenance, no-leak stem seals and the safety assurance of a blowout-proof stem assembly. For performance, safety and reliability, tomac is the valve of choice. to Thick liner 00% inspected at 0,000 VDC for defects is made from highly corrosion resistant FEP to 300 F (50 C) or PF to 400 F (00 C). variety of metallic and non-metallic ball material options are available. Ductile iron body sections (STM ) with high strength B7 fasteners are both rugged and rigid. B8 offered as alternate. KH lined valves are now available with CF-8M stainless steel body armor, ball and stem inserts. Designed in accordance with SME B6.5 Class 50 lb (DIN 50/PN6) flange dimensions and SME B6.0 face-to-face dimensions. Leak testing according to PI 598 or DIN 330 criteria. Separate ball/stem connection greatly reduces side loading, thus extending stem seal life. Cavity space minimizes the retention of process media. Lining securely locked into the body by T slots and locking grooves; completely encapsulated ball and stem. Can handle pressures from full vacuum to 75 psi (9 bar).

3 Extended Packing djustable stem packing. Graphite bearing prevents side loading and extends seal life. ISO 5 universal mounting pad permits easy automation even with the valve in the pipeline. Extended Packing Fully lined stuffing box with purge connection and live-loading for additional fugitive emission protection available on KH, KH and KH3 (T Luft Certified). KH Full Port Minimizes pressure loss and increases flow capacity to reduce energy and pumping costs. / in (5 mm) through in (300 mm). DIN dimensional only not available to SME dimensions. See page 4 for technical data. Chlorine Service Specially prepared and trimmed per Durco standard chlorine cleaning procedure. Stem Extensions llow for insulation of valve. mac Extensive selection through 3 in (300 mm) for standard port and ball port valves. KH NSI Full Port Same benefits as KH in an SME dimensional valve. in (5 mm) through in (300 mm) See page 7 for technical data. KH3 Standard Port SME dimensional valve permits replacement of present valves with no need to alter existing piping. in (5 mm) through in (300 mm) See page 8 for technical data. vailable Options Control Valves Characterized ball available for throttling applications. See page 7 for technical data. C-ball eliminates media build-up in ball cavity. tomac/utomax Rotary Control Valve Packages Precision control, corrosion resistance, positive stem sealing, and bubble tight shut-off in a low torque rotary control valve at a fraction of the cost of traditional rising stem valves. See page 7 for technical data.

4 V-0 (US) pp-3 //0 4:33 PM Page 5 Dan K. Snelson V-0 Disk : T O M C MP3 3-Way Lined Valves T High flow capacity with minimal pressure loss through the valve, thereby reducing plant operating costs. he MP3, 3-way ball valve is the best choice Lower cost than alloy valves with equal or superior corrosion resistance in difficult services. Compact design permits use where space constraints are a concern. Floating ball seat design for bubble-tight shutoff across the pressure range. for corrosive diverter PF standard material for valve lining and encapsulated ball. Rated for services to 00 C (400 F) and ambient pressures to 9.6 bar (85 psi). vailable in 5 mm ( in), 40 mm ( in), 50 mm ( in) and 80 mm (3 in) sizes. valve applications. MP3L Symbol # 90 B/C /C Symbol #. 80 B/C /C B MP3L Symbol # - 90 Symbol # 90 /B/C B/C Symbol #6 80 /B B/C /B/C Symbol #3 90 Symbol #7 80 /B /C B/C /B/C B/C Symbol #4 90 Symbol #8 80 /B/C /B/C /C /C /B Symbol #5 90 Symbol #9-80 /B /C /C /B B/C Optional flow arrangements may be available upon request. Consult factory for pressuretemperature curve. See page 9 for technical data. 4 C C B C B MP3T MP3T Symbol #-5-90 Symbol # to B MP3T MP3L Symbol # C C C B B C B C C B C B C B B C B B B C

5 KH5 Ceramic Lined Valves ISO 5 mounting pad makes actuator mounting quick and easy. Stem sealing requires virtually no maintenance and provides low stem torque. djuster and packing gland feature a ball and socket fit for certain and even stem sealing reliability. PTFE chevron or graphite packing rings in the deep stuffing box protects against external leakage to the atmosphere. Full port minimizes pressure loss and increases flow capacity to reduce energy and pumping costs. wide selection of stem material options available 36 stainless steel, Hastelloy C-76 or Mg-PSZ (Partially Stabilized Zirconia) ceramic. Recommended when nothing else will work in abrasive slurries, high temperature corrosives and services with large temperature fluctuations. Ball seals against machined seat areas for shutoff to NSI B6.04 Class IV, or DIN 330, part 3, BN leakrate 3. ll interior body surfaces and the ball are made of solid Mg-PSZ for superior erosion/corrosion resistance. Excellent strength and thermal shock resistance. Minimum cavity space minimizes the retention of line media within the body cavity so product contamination problems are significantly reduced. vailable in 5 mm ( in), 40 mm ( in), 50 mm ( in), 80 mm (3 in) and 00 mm (4 in) sizes. Optional V-port ball provides equal percentage control for throttling abrasive/corrosive media. For complete information, request Bulletin V-50. See page for technical data. 5

6 V-0 (US) pp-3 //0 4:33 PM Page 7 Dan K. Snelson V-0 Disk : T O M C V-Port Control Valves n addition to the features and benefits that have made it the process industry s most preferred lined ball valve worldwide, tomac typical characteristic curve for V-Port KH3 Valves 00 Flow Rates (5) / (40) (50) 3 (80) 4 (00) 6 (50) 90 Cv (Kv) Values 6/4 (5/) 5 (3) 40 (36) 65 (56) 4 () 89 (63) C = US gal/min at psi P (K = m3/hr at bar P) v v % OF OPENING LIVE ZERO offers the V-port ball valve Refer to Sections II and IV of the Durco Technical Manual for valve and actuator sizing. for precise modulating Consult factory for KH data. control services. tomac V-port valves are available in in (5 mm), in (40 mm), in (50 mm), 3 in (80 mm) and 4 in (00 mm) sizes and in models KH3, KH, KH. 6 Maximum Cv (K v) Values for V-Port KH3 Valves % OF MXIMUM Cv I ISO 5 mounting pad facilitates actuation. to

7 ctuation Options For tomac Lined Valves Manual Operation ll tomac ball valves are fitted with a hand wrench as standard for manual operation. gearbox option is also available for valve sizes 6 in (50 mm) and above. ctuation The modular construction of tomac ball valves allows for easy use of all types of actuation devices. ctuators can be mounted to the valves on-site, without removing them from the pipeline. utomax Flowserve s utomax is a specialist in valve automation systems offering rack and pinion, heavy-duty and electric actuators along with positioners, limit switches, engineered special control circuits and related accessories. n tomac ball valve features: Low, constant and predictable torque Thrust bearing supported stem to eliminate side-loading of packing and subsequent leakage during cycling Floating ball seat design for bubble-tight shutoff Long-life seats to minimize downtime and maintenance ISO 5 mounting flanges mac Torque at Torque at KH3-STNDRD PORT KH & -FULL PORT Torque Ratings in 0 psi p in/lbs 50 psi p in/lbs (mm) (0 bar p Nm) (0 bar p Nm) / (5) 53 (6) 53 (6) 3 / 4 (0) 53 (6) 53 (6) (5) 53 (6) 53 (6) / (40) 3 (5) 77 (0) (50) 3 (5) 77 (0) 3 (80) 484 (55) 69 (70) 4 (00) 69 (70) 796 (90) 6 (50) 06 (80) 770 (00) 8 (00) 655 (300) 530 (600) 0 (50) 566 (90) 0,60 (00) (300) 3540 (400) 5,930 (800) (5) 53 (6) 53 (6) / (40) 53 (6) 53 (6) (50) 3 (5) 77 (0) 3 (80) 3 (5) 77 (0) 4 (00) 484 (55) 69 (70) 6 (50) 69 (70) 796 (90) 8 (00) 06 (80) 770 (00) 0 (50) 655 (300) 530 (600) (300) 655 (300) 530 (600) Test temperature: 68 F (0 C). Test media: water. 7

8 V-0 (US) pp-3 //0 4:33 PM Page 9 Dan K. Snelson V-0 Disk : T O M C KH7 For Glass Pipe Systems KH7-KP valves are easy to install in glass pipe systems with socket/ball or plane ends according to DIN/ISO 3587 and See page 0 for technical data. 8 Molded fluorocarbon resin liners are made of either FEP or PF, depending upon application, for both long service and high corrosion resistance due to their uniform and blowholefree thickness. The liners non-stick properties are also ideal for handling highly viscous fluids or for those process applications with high purity requirements. nti-static device protects against potentially dangerous electrostatic discharges. Long-term protection against atmospheric leakage is provided by PTFE chevron packing rings in the deep stuffing box and by the molded liner/seal. For flange/glass end connections the KH7-KPF is available. KH7 valves are also available with conductive material for the linings, seals and gland packings. Stem is internally assembled to eliminate possibility of blowout. to

9 KH6 Fully Lined Tank Drain Valves Meets the design criteria of SME B6.5 Class 50 (DIN 50-PN 6) and is leak tested to PI 598 (DIN 330). Designed with a larger inlet port, the valve s full port design minimizes pressure loss and increases flow capacity to reduce energy and pumping costs. Primarily used for tank drainage, KH6 valves are also commonly installed in place of reducing spools to downsize piping dimensions. FEP and PF liners offer both long service life and superior corrosion resistance. The liners inert non-stick properties make it ideal for highly viscous or high purity services. The KH6 tank drain valve offers broad service flexibility and superior performance. mac vailable in sizes: 9 in (5 mm) x in (50 mm) in (40 mm) x 3 in (80 mm) in (50 mm) x 3 in (80 mm) in (50 mm) x 4 in (00 mm) 3 in (80 mm) x 4 in (00 mm) 4 in (00 mm) x 6 in (50 mm) 6 in (50 mm) x 8 in (00 mm) See page 9 for technical data.

10 V-0 (US) pp-3 //0 4:34 PM Page Dan K. Snelson V-0 Disk : T O M C PN/T Lined Sampling Valves PN/SG Lined Sampling Valves With Sight Glass tomac PN valves provide safe sampling of toxic and highly corrosive media without interruption vailable in DIN 50-PN6 and NSI B6.5 Class 50 designs daptable for use in vertical piping systems Easily automated Maximum pressure to 87 psi (6 bar) FEP, PF or conductive linings available Sampling volumes between 5 and 00 ml Optional connections for sample bottles Designed with a minimum of dead space of process flow. PN/SG tomac sampling valve with sight glass PN/T tomac sampling valve 0 See page for technical data.

11 SG Lined Sight Glass The tomac Sight Glass Offers Clear Visual Inspection From Either Side The integrated drip lip with its cast core provides visual flow indication even at low velocity.* SG Sight Glass Highly Corrosion Resistant Liners ll internal components other than the glass have the same molded fluorocarbon liners. These are made of either FEP or PF, depending upon application, and offer both long service life and high corrosion resistance due to the thick, uniform, blowhole-free liner. The liners non-stick and inert properties are ideal for highly viscous and high purity applications. *Optional: Rotor Safety Glass Borosilicate glass is utilized to withstand high temperatures, mechanical stress and corrosion. See pages 3 and 4 for technical data. SG3 3-Way Sight Glass SG4 4-Way Sight Glass

12 V-0 (US) pp-3 //0 4:36 PM Page 3 Dan K. Snelson V-0 Disk : T O M C RV* and RL Lined Check Valves, RV/SG Lined Check/Sight Glass Combination Universal pplication The tomac check valve can be installed either vertically or horizontally*,* dependent upon application. Solid PTFE Ball The ball has the same properties as the FEP or PF lining material. Full Port Design The full port design offers excellent flow characteristics to minimize pressure loss. Low Opening Pressure The minimum opening pressure required to unseat the ball in the vertical position is 0.07 bar ( psi). RV Check Valve Safety Glass Borosilicate glass, in accordance with DIN 7080, is utilized to withstand high temperatures, mechanical stress and corrosion. For those applications requiring a higher flow capacity, tomac check valve type RV/SG should be considered. See page 5 for technical data. RV/SG Check Valve/Sight Glass Combination to * Now available upon request in 0 in (50 mm) and in (300 mm) sizes. ** Contact your nearest Flowserve office for installation instructions. Optional: Hollow PTFE Ball See page 5 for technical data. RL 45 ( Y ) Check Valve

13 SF Lined Strainer Flow Characteristics The flow path through the filter insert is a larger area than the original pipe cross-section. This minimizes possible pressure loss. Corrosion Resistant Filter Insert The insert consists of two perforated PTFE cylinders with an ETFE filter screen in between. This design offers the same outstanding corrosion resistant properties as the FEP or PF lining material. Standard mesh is 60 (300 micron). Optional mesh: 69 (00 micron); 35 (500 micron); 9 (,000 micron). Other mesh openings on request. mac Easy Servicing and Maintenance The filter insert can be changed or easily cleaned without removing the strainer from the line. For added operator safety and convenience, an optional ball valve may be specified in place of the PTFE plug. The residual fluid in the insert area can be removed by means of the PTFE drain plug. This can be done prior to removing the access flange when changing or cleaning the filter. See page 6 for technical data. Optional drain valve (PTFE or Kynar ) Kynar is a registered trademark of ELF tochem North merica, Inc. 3

14 V-0 (US) pp4-8 //0 4:4 PM Page 4 Dan K. Snelson V-0 Disk : T E C H N I C L D T KH Full Port Valves Material Specification Item Qty. Designation 00 body 00 side piece 030 seat ring 040 stem 050 ball 060 gland follower 070 hand lever stud fastener hexagon nut 00 packing 0 hexagon nut 0 stud fastener 30 lock washer 40 hexagon fastener 50 safety washer 70 grounding device 0 lever stop 0 hexagon fastener STM Ductile Iron 395, FEP/PF* Ductile Iron 395, FEP/PF* PTFE Stainless Steel 35 CD-4MCu, PF Ductile Iron 395, FEP/PF* Stainless Steel 35 CF 8, PTFE-Graphite Galvanized, die cast metal Stainless Steel 93 B8 Stainless Steel 94 8 PTFE/PTFE-Graphite* B8 ISI B8 ISI 304 Stainless Steel ISI 30 Stainless Steel ISI 430F Stainless Steel 93 B8 DIN GGG40.3 DIN EN 563 GGG40.3 DIN EN 563 PTFE.446 GGG40.3 DIN EN DIN EN DIN EN DIN DIN7440 PTFE.430 DIN DIN DIN DIN DIN DIN DIN EN DIN7440 *Optional Ceramic ball (LO3) available through 6 in (50 mm). 3 in (80 mm) and 4 in (00 mm) are DIN EN 56, 6 in (50 mm) and larger are DIN EN 005. Dimensions/Weights L SME DIN / (5) 5/8 (30) 5/8 (30) 3 /4 (0) 57/8 (50) 57/8 (50) (5) 6 (5.4) 65/6 (60) (3) 7/6 (80) 7 (78) 77/8 (00) / (40) (50) 8 (03) 9/6 (30) (65) 7/6 (90) 3 (80) 9/ (4) 3/6 (30) 4 (00) / (9) 35/3 (350) 6 (50) 4 (356) 87/8 (480) 8 (00/50)* 8 (457) 8 (457) 8 (00)** 8 (457) 8 (457) 0 (50) (534) (534) (300) 4 (60) 4 (60) H 43/3 (0) 43/3 (0) 47/3 (3) 53/3 (45) 53/3 (45) 65/6 (60) 77/8 (00) 85/3 (07) 8/3 (0) 9/3 (3) 9/3 (3) 4/6 (373) R H 65/6 (60) 7/8 (48) 65/6 (60) 7/8 (48) 65/6 (60) 5/6 (49) 8/4 (0) /6 (68) 8/4 (0) /6 (68) 8/4 (0) 3/4 (83) 5/6 (33) 47/8 (9) 5/6 (33) 5 (7) 5/6 (33) 59/6 (4) 3/4 (337) 8/3 (04) 3/4 (337) 8/3 (04) 7/6 (450) 0/6 (56) (30) 3/ (343) Weight lbs (kg) t SME DIN 3/8 (60) 9.5 (4.3) 9.5 (4.3) 3/4 (70) 0. (4.6) 0. (4.6) 9/6 (65) 0.6 (4.8).9 (5.4) 3/8 (80).4 (9.7) 3/8 (80) 0.3 (9.).9 (0.4) 37/6 (87) 8.4 (.9) 30.9 (4.0) 4/4 (08) 56.6 (5.7) 45/8 (8) 65.0 (9.5) 70.5 (3.0) 5/ (40) 97.0 (44.0) 04.0 (47.) 7/6 (80) 07.6 (94.) 0.4 (00.0) 9 (9) 38.0 (08.0) 57.9 (7.0) 9/6 (30) (08.0) (08.0) 0/ (67) 77.3 (330.0) (35.0) (94) 03.8 (460.0) (46.0) *Pass-through hand lever 6 in (673) mm **Pass-through hand lever 35 in (90) mm Reduced port valve Ball valve only with manual actuator (weight without actuator) Face to Face dimensions acc. to NSI B 6.0 Face to Face dimensions acc. to DIN EN 558- ll dimensions are approximate and for illustration purposes only. For exact dimensions request certified dimensional prints. 4

15 ctuator Mounting of the KH Full Port Valves Torque Ratings 0 psi p in/lbs 50 psi p in/lbs (0 bar p Nm) (0 bar p Nm) / (5) 70 (8) 9 (79) 3 /4 (0) 70 (8) 9 (79) (5) 70 (8) 9 (79) /4 (3) 5 (8) 77 (0) / (40) 59 (8) 77 (0) (50) 03 (3) (5) /4 (65) 398 (45) 44 (50) 3 (80) 44 (50) 53 (60) 4 (00) 69 (70) 708 (80) 6 (50) 06 (0) 770 (00) 8/6* (00/50*) 06 (0) 770 (00) 8 (00) 655 (300) 530 (600) 0 (50) 375 (370) 839 (940) (300) 3540 (400) 5930 (800) *Reduced port valve. Test temperature is 68 F (0 C). Test medium is water. For actuator sizing torques, refer to the Durco Technical Manual. Flow Rates C v (K v ) Value / (5) 9.6 (6.9) 3 /4 (0) 8.4 (4.4) (5) 44.9 (38.6) /4 (3) 79.5 (68.4) / (40) 4. (.4) (50) 3.3 (99.9) /4 (65) 38.7 (39.3) 3 (80) 6. (55.8) 4 (00) 09.8 (940.) 6 (50) (34.0) 8/6* (00/50*) (50.8) 8 (00) (394.0) 0 (50) (56.0) (300) (759.0) Cv = US gal/min at psi P (Kv = m 3 /hr at bar P) *Reduced port valve Dimensions in f in t in H in H3 in ød in ød in ød in L in R in R in øk in SW in n-øh in Deep in ISO (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) / (5) /8 (3) 7 /3 (6) 9 /3 (7.5) /6 (7) 3 /3 (0) 3 /8 (35) / (65) 5 /3 (37) 9 /6 (4) /3 (9) 3 /3 (50) 5 /6 (8) 4-M6 5 /6 (8) F05 3 /4 (0) /8 (3) 7 /3 (6) 9 /3 (7.5) /6 (7) 3 /3 (0) 3 /8 (35) / (65) 5 /3 (37) 9 /6 (4) /3 (9) 3 /3 (50) 5 /6 (8) 4-M6 5 /6 (8) F05 (5) /8 (3) 9 /3 (7) 3 /8 (9.3) 3 /6 (30) 3 /3 (0) 3 /8 (35) / (65) 5 /3 (37) 9 /6 (4) /3 (9) 3 /3 (50) 5 /6 (8) 4-M6 5 /6 (8) F05 (3) /8 (3) 3 /3 (0) 7 /3 (.5) /3 (34.5) 5 /8 (6) 5 /3 (55) 3 7 /3 (90) 7 /3 (47) 5 /3 (0) 3 /3 (0) 3 /4 (70) 5 /6 (8) 4-M8 5 /3 () F07 / (40) /8 (3) 3 /3 (0) 7 /3 (.5) 3 /8 ( 35) 5 /8 (6) 5 /3 (55) 3 7 /3 (90) 7 /3 (47) 5 /3 (0) 3 /3 (0) 3 /4 (70) 5 /3 () 4-M8 5 /3 () F07 (50) /8 (3) 3 /3 (0) 7 /3 (.5) 5 /3 (37) 5 /8 (6) 5 /3 (55) 3 7 /3 (90) 7 /3 (47) 5 /3 (0) 3 /3 (0) 3 /4 (70) 5 /3 () 4-M8 5 /3 () F07 (65) /8 (3) 5 /3 (3) 9 /3 (5.5) 3 /6 (46) 7 /3 () 3 /4 (70) 5 (5) 9 /3 (58) 9 /3 (3) 9 /6 (4) 4 (0) 5 /8 (6) 4-M0 9 /3 (5) F0 3 (80) /8 (3) 5 /3 (3) 9 /3 (5.5) 3 /6 (46) 7 /3 () 3 /4 (70) 5 (5) 9 /3 (58) 9 /3 (3) 9 /6 (4) 4 (0) 5 /8 (6) 4-M0 9 /3 (5) F0 4 (00) /8 (3) 5 /3 (3) 9 /3 (5.5) 3 /6 (46) 7 /3 () 3 /4 (70) 5 (5) 9 /3 (58) 9 /3 (3) 9 /6 (4) 4 (0) 5 /8 (6) 4-M0 9 /3 (5) F0 6 (50) 5 /3 (4) 9 /6 (4) 5 /3 (9.5) /4 (57) 3 /6 (30) 3 /3 (85) 5 5 /3 (39) 3 /4 (70) 3 /3 (8) 9 /6 (4) 5 (5) 3 /4 (0) 4-M /6 (8) F 8/6* (00/50*) 5 /3 (4) 9 /6 (4) 5 /3 (9.5) /4 (57) 3 /6 (30) 3 /3 (85) 5 5 /3 (39) 3 /4 (70) 3 /3 (8) 9 /6 (4) 5 (5) 3 /4 (0) 4-M /6 (8) F 8 (00) 5 /3 (4) 9 /6 (4) 5 /3 (9.5) /3 (59) / (40) 3 /3 (85) 5 5 /3 (39) 3 /3 (85) 3 /8 (35) 9 /6 (4) 5 (5) /6 (7) 4-M /6 (8) F 0 (50) 5 /3 (4) /3 (7) 3 /8 (35) 3 / (89) 3 /3 (50) 3 5 /6 (00) 6 9 /3 (75) 3 3 /3 (95) 3 /3 (48) 5 /8 (6) 5 / (40) 3 /3 (36) 4-M6 /6 (8) F4 (300) 5 5 /3 (4) /3 (0) 5 /3 (45) 3 6 /3 (97) /3 (60) 5 /8 (30) 8 /3 (04) 4 5 /6 (0) 5 /6 (55) 5 /8 (6) 6 / (65) 3 /6 (46) 4-M 7 /3 () F6 *Reduced port. ll dimensions are approximate and for illustration purposes only. For exact dimensions request certified dimensional prints. 5

16 TECHNICL DT SF Strainer Dimensions/Weights L H Weight lbs (kgs) SME DIN SME DIN (5) 6 / (65) 6 9 /3 (60) 5 (5) 0.8 (4.9) 0.6 (4.8) / (40) 7 7 /8 (00) 5 9 /3 (50) 0. (9.) (50) 9 (8.6) 9 /6 (30) 6 / (65) 7.3 (.4) 6.9 (.) 3 (80) / (37.5) 7 /3 (30) (80) 6.7 (8.0) 59.5 (7.0) 4 (00) 4 / (368) 3 5 /3 (350) (305) 8.7 (37.5) 75.4 (34.) 6 (50*) 8 / (470) 8 / (470) 6 3 /3 (409) 98.4 (90.0) 98.4 (90) 8** (00) 3 5 /8 (600) 3 5 /8 (600) 3 7 /6 (595) 46.8 (0.0) 46.8 (0.0) *Face to Face Dimensions acc. to NSI B6.0. **Face to Face Dimensions acc. to DIN EN558-. Connection dimensions according to DIN 50-PN6 (NSI B6.5 Class 50). Material Specification Item Qty. Designation STM DIN body Ductile Iron STM 395, FEP/PF* GGG-40.3 flange Ductile Iron STM 395 GGG filter PTFE/ETFE PTFE/ETFE 4 plug PTFE PTFE stud fastener STM 93 B8.430 DIN hexagon nut STM DIN7440 *Optional Flow Rates Filter in µm - C v (K v ) Filter in µm - C v (K v ) Filter in µm - C v (K v ) Filter in µm - C v (K v ) (5) 8. (7.0) 8.3 (7.) 8.4 (7.) 9. (7.9) / (40).9 (8.8) 4.8 (.3) 7.4 (3.6) 8.0 (4.) (50) 34.4 (9.6) 36. (3.) 37.5 (3.3) 4.4 (35.4) 3 (80) 9. (78.4) 97.4 (83.8) 05. (90.4) 09.4 (94.) 4 (00) 5.7 (3.4) 63.0 (40.) 7.8 (48.7) 78. (53.3) 6 (50) (87.) (306.3) (335.) (348.9) 8 (00) (468.0) (479.0) 576* (495*) (53.0) *Estimated Value Cv = US gal/min at psi P (Kv = m 3 /hr at bar P). Flow rates for other mesh sizes available upon request. ll dimensions are approximate and for illustration purpose only. For exact dimensions, request certified dimensional prints. Pressure/Temperature and Vacuum/Temperature Ratings 6 *For applications below 4 F (-0 C) consult factory.

17 tomac KH NSI Dimensional Full Port Valves Dimensions/Weights L H R ød Weight ) lbs (kg) (5) 5 (7) 4 3 /3 (0) 6 5 /6 (60) (5) 9.04 (4.) / (40) 6 / (65) 5 /3 (45) 8 9 /3 (0) 9 /6 (40) 6.75 (7.6) (50) 7 (78) 6 5 /6 (60) 8 9 /3 (0) (50) 7.77 (.6) 3 (80) 8 (03) 8 /6 (05) /3 (33) 7 /3 (7) 6.7 (8.0) 4 (00) 9 (9) 8 /3 (0) /3 (33) 3 3 /3 (95) (36.0) 6 (50) 0 / (67) 5 /3 (99) 3 9 /3 (337)* 5 /8 (30) 54.8 (70.0) *Pass-through hand lever 6 in (673 mm) is standard. Material Specification Item Qty. Designation STM DIN 00 body Ductile Iron 395, FEP/PF* GGG40.3 DIN EN side piece Ductile Iron 395, FEP/PF* GGG40.3 DIN EN seat ring PTFE PTFE 040 stem Stainless Steel 35 CD-4MCu, PF ball Ductile Iron 395, FEP/PF* GGG40.3 DIN EN gland follower Stainless Steel 35 CF 8, PTFE-Graphite.4308 DIN EN hand lever Galvanized, die cast metal.4 DIN EN stud fastener Stainless Steel 93 B8.430 DIN hexagon nut Stainless Steel DIN packing PTFE/PTFE-Graphite* PTFE 0 hexagon nut DIN stud fastener 93 B8.430 DIN lock washer ISI DIN hexagon fastener 93 B8.430 DIN safety washer ISI DIN grounding device Stainless Steel ISI DIN74 0 lever stop Stainless Steel ISI 430F.0037 DIN EN hexagon fastener Stainless Steel 93 B8.430 DIN7440 *Optional **vailable in selected sizes Ceramic ball (LO3) available through in (50 mm). 3 in (80 mm) and 4 in (00 mm) are DIN EN 56, 6 in (50 mm) and larger are DIN EN 005. Flow Rates C v (K v ) Value (5) 54. (46.6) / (40) 47.5 (6.9) (50) 35.4 (0.5) 3 (80) 590. (507.8) 4 (00) 08. (953.4) 6 (50) (577.7) Cv = US gal/min at psi P (Kv = m 3 /hr at bar P) Torque Ratings 0 psi p 0 psi p (0 bar p) (50 bar p) in/lbs (Nm) in/lbs (Nm) (5) 70 (8) 70 (8) / (40) 59 (8) 77 (0) (50) 03 (3) (5) 3 (80) 398 (45) 44 (50) 4 (00) 478 (54) 637 (7) 6 (50) 0 (974) 68 (90) Test temperature is 0 C (68 F). Test medium is water. For actuator sizing torques, refer to the Durco Technical Manual. ll dimensions are approximate and for illustration purposes only. For exact dimensions request certified dimensional prints. 7

18 V-0 (US) pp4-8 //0 4:4 PM Page 8 Dan K. Snelson V-0 Disk : T E C H N I C L D T KH3 Standard Port Valves Dimensions/Weights (5) / (40) (50) 3 (80) 4 (00) 6 (50) 8 (00) 0 (50) (300) L H 5 (7) 43/3 (0) 6/ (65) 43/3 (0) 7 (78) 5 3/3 (45) 8 (03) 65/8 (60) 9 (9) 8 /6 (05) 0/ (67) 8 /3 (0) / (9) /4 (3) 3 (330) 4/6 (373) 4 (356) 4/6 (373) R 6 5/8 (60) 6 5/8 (60) 8 /4 (0) 8 /4 (0) 5/6 (33) 5/6 (33) 3/4 (337)* 7 /6 (450) 7 /6 (450) H 7/8 (48) 5/6 (49) /6 (68) 3/4 (83) 5 (7) 59/6 (4) 8 (03) 0/6 (56) 0/6 (56) ød 3/4 (9) (5) 9/6 (40) 3/3 (50) 35/3 (80) 4 (00) 5 7/8 (49) 7 7/8 (00) 7 7/8 (00) Weight lbs (kg) 9.7 (4.4) 3.7 (6.).5 (0.6) 35.5 (6.) 66.4 (30.) 0.4 (50.) 35.8 (07.0) (98.0) (30.0) *Pass-through hand lever 6 in (673 mm) is standard. Pass-through hand lever 36 in (900 mm) is standard. Material Specification Item Qty. Designation 00 body 00 side piece 030 seat ring 040 stem 050 ball 060 gland follower 070 hand lever stud fastener hexagon nut 00 packing 0 hexagon nut 0 stud fastener 30 lock washer 40 hexagon fastener 50 safety washer 70 grounding device 0 lever stop 0 hexagon fastener STM Ductile Iron 395, FEP/PF/PP* Ductile Iron 395, FEP/PF/PP* PTFE Stainless Steel 35 CD-4MCu, PF Ductile Iron 395, FEP/PF* Stainless Steel 35 CF 8, PTFE-Graphite Galvanized, die cast metal Stainless Steel 93 B8 Stainless Steel 94 8 PTFE/PTFE-Graphite* B8 ISI B8 ISI 304 Stainless Steel ISI 30 Stainless (galvanized) 83 B Stainless Steel 93 B8 DIN GGG40.3 DIN EN 563 GGG40.3 DIN EN 563 PTFE.446 GGG40.3 DIN EN DIN EN DIN EN DIN DIN7440 PTFE.430 DIN DIN DIN DIN DIN DIN DIN EN DIN7440 *Optional Ceramic ball (LO3) available through 6 in (50 mm). 4 in (00 mm) and 6 in (50 mm) are DIN EN 56, 8 in (00 mm) and larger are DIN EN 005. Torque Ratings (5) / (40) (50) 3 (80) 4 (00) 6 (50) 8 (00) 0 (50) (300) ctuator Mounting of the KH3 0 psi p (0 bar p) in/lbs (Nm) 70 (8) 70 (8) 60 (8) 03 (3) 480 (55) 69 (70) 06 (0) 655 (300) 655 (300) Flow Rates 50 psi p (0 bar p ) in/lbs (Nm) 70 (8) 70 (8) 77 (0) (5) 69 (70) 708 (80) 770 (00) 530 (600) 530 (600) Test temperature is 68 F (0 C). Test medium is water. For actuator sizing torques, refer to the Durco Technical Manual. (5) / (40) (50) 3 (80) 4 (00) 6 (50) 8 (00) 0 (50) (300) Cv (Kv) 36.7 (3.6) 5.3 (44.) 84. (58.4) 06.3 (77.5) (580.3) 97.3 (789.) 90.8 (636.) (444.7) (793.0) Cv = US gal/min at psi P (Kv = m3/hr at bar P) Dimensions f / / (5) 8 (3) / (40) /8 (3) (50) /8 (3) 3 (80) /8 (3) 4 (00) /8 (3) 6 (50) /8 (3) 8 (00) 5/3 (4) 0 (50) 5/3 (4) (300) 5/3 (4) 8 t 7/ 3 (6) 9/3 (7) 3/3 (0) 3/ 3 (0) 5/3 (3) 5/3 (3) 9 /6 (4 ) 9 /6 (4 ) 9 /6 (4 ) H 5/ 6 (7.5) 3/8 (9.3) / (.5) / (.5) 5/8 (5.5) 5/8 (5.5) 3 /4 (9.5) 3 /4 (9.5) 3 /4 (9.5) H3 ød ød /6 (7) 3/3 (0) 3/8 (35) 3/6 (30) 3/3 (0) 3/8 (35) 5/8 (6) 3/8 (35) 3/4 (70) 5/3 (37) 5/8 (6) 3/4 (70) 7/3 (47) 7/3 () 3/4 (70) 3/6 (46) 7/3 () 3/4 (70) /4 (57) 3/6 (30) 3 /3 (85) /3 (59) 9/3 (40) 3 /3 (85) /3 (59) 9/3 (40) 3 /3 (85) ød 9/6 (65) 9/6 (65) 3 7/3 (90) 3 7/3 (90) 5 (5) 5 (5) 5 9/3 (50) 5 9/3 (50) 5 9/3 (50) L 5/3 (37) 5/3 (37) 7/3 (47) 7/3 (47) 9/3 (58) 9/3 (58) 3/4 (70) 3 /3 (85) 3 /3 (85) R R 9/ / 6 (4) 3 (9) 9/6 (4) /3 (9) 5/3 (0) 3/3 (0) 5/ 3/ 3 (0) 3 (0) 9/3 (3) 9/6 (4) 9/3 (3) 9/6 (4) 3/3 (8) 9/6 (4) 3/8 (35) 9/6 (4) 3/8 (35) 9/6 (4) øk (50) (50) 3/4 (70) 3/4 (70) 4 (0) 4 (0) 5 (5) 5 (5) 5 (5) SW 5/ 6 (8) 5/6 (8) 5/3 () 5/ 3 () 5/8 (6) 5/8 (6) 5 /3 (0) /6 (7) /6 (7) Reduced port. Consult factory. ll dimensions are approximate and for illustration purposes only. For exact dimensions request certified dimensional prints. n-øh 4-M6 4-M6 4-M8 4-M8 4-M0 4-M0 4-M 4-M 4-M Deep 5/ 6 (8) 5/6 (8) 5/3 () 5/ 3 () 9/3 (5) 9/3 (5) /6 (8) /6 (8) /6 (8) ISO F05 F05 F07 F07 F0 F0 F F F

19 MP3 3-Way Valves Dimensions/Weights L L/ F Weight mm (in) mm (in) mm (in) kg (lbs) (5) 6 5 /6 (60) 3 5 /3 (80) F05.5 (5.) / (40) 7 7 /8 (00) 3 5 /6 (00) F (.0) (50) 9 /6 (30) 4 7 /3 (5) F (6.7) 3 (80) 7 /3 (30) 6 3 /3 (55) F (3.0) 4 (00) 3 5 /3 (350) 6 7 /8 (75) F0 99. (45.0) Torque Ratings 0 psi p 0 psi p (0 bar p) (50 bar p) Nm (in/lbs) Nm (in/lbs) (5) 4 (4) 77 (0) / (40) 95 () 65 (30) (50) 65 (30) 363 (4) 3 (80) 75 (8) 08 (5) 4 (00) 973 (0) 363 (54) Test temperature is 68 F (0 C). Test medium is water. For actuator sizing torques, refer to the Durco Technical Manual. Flow Rates: L-Ball C v (K v ) Value* (5) 3.8 (.9) / (40) 36.5 (3.4) (50) 60.0 (5.6) 3 (80) 4.4 (07.0) 4 (00).7 (90.7) Cv = US gal/min at psi P (Kv = m 3 /hr at bar P) *Contact your nearest office or agent for actuator mount information. KH6 Tank Drain Valves Dimensions/Weights L t R H Weight lbs (kg) SME DIN mm (in) mm (in) mm (in) SME DIN x (5/50) 5 9 /3 (50) 5 9 /3 (50) 9 /6 (65) 6 5 /6 (60) 4 3 /3 (0) 3. (6.0) 4.5 (6.6) /x3 (40/80) 7 9 /3 (85) 7 9 /3 (85) 3 /6 (80) 8 9 /3 (0) 5 3 /4 (45) 8.7 (3.0) 8.7 (3.0) x3 (50/80) 7 9 /3 (95) 7 9 /3 (95) 3 7 /6 (88) 8 9 /3 (0) 6 5 /6 (60) 34.4 (5.6) 35.7 (6.) x4 (50/00) 7 7 /8 (00) 7 7 /8 (00) 3 7 /6 (88) 8 9 /3 (0) 6 5 /6 (60) 40.8 (8.5) 38.6 (7.5) x6 (50/50) 7 /3 (85) 7 /3 (85) 3 7 /6 (88) 8 9 /3 (0) 6 5 /6 (60) 49.8 (.6) 49.8 (.6) 3x4 (80/00) 9 5 /8 (45) 9 5 /8 (45) 4 9 /3 (8) /3 (33) 8 /6 (05) 68.3 (3.0) 68.3 (3.0) 3x8 (80/00) 8 (00) 4 9 /3 (8) /3 (33) 8 /6 (05) 45.5 (66.0) 4x6 (00/50) 3 /3 (90) 3 /3 (90) 5 / (40) /3 (33) 8 /3 (0) 0. (50.0) 0.4 (46.0) 6x8 (50/00) (305) (305) 7 3 /3 (80) 3 /4 (337) /6 (3) (5.0) (5.0) Flange connections per DIN 50/PN6 (NSI B6.5 Class 50 lbs). Torque Ratings 0 psi p 0 psi p mm (in) (0 bar p) (50 bar p) Nm (in/lbs) Nm (in/lbs) x (5/50) 7 (8) 7 (8) /x3 (40/80) 59 (8) 77 (0) x3 (50/80) 03 (3) (5) x4 (50/00) 03 (3) (5) x6 (50/50) 03 (3) (5) 3x4 (80/00) 44 (50) 53 (60) 3x8 (80/00) 44 (50) 53 (60) 4x6 (00/50) 69 (70) 708 (80) 6x8 (50/00) 06 (0) 770 (00) Test temperature is 68 F (0 C). Test medium is water. For actuator sizing torques, refer to the Durco Technical Manual. Flow Rates Outlet/Inlet C v (K v ) x (5/50) 37.3 (3.) /x3 (40/80) 35. (6.3) x3 (50/80) 80.7 (69.4) x4 (50/00) 77.5 (66.7) x6 (50/50) 70.3 (60.5)* 3x4 (80/00) (574.3) 3x8 (80/00) 67 (53)* 4x6 (00/50) (87.) 6x8 (50/00) 388 (95)* Cv = US gal/min at psi P (Kv = m 3 /hr at bar P ) *Estimated value ll dimensions are approximate and for illustration purposes only. For exact dimensions request certified dimensional prints. 9

20 V-0 (US) pp4-8 //0 4:4 PM Page 0 Dan K. Snelson V-0 Disk : T E C H N I C L D T tomac KH7 Ball Valves Dimensions/Weights (5) / (40) (50) 4 (00) L L /3 (80) 4 /3 (0) 45/6 (0) 63/3 (55) 5 (5) 7 (78) 77/8 (00) 03/6 (75) ød K 3 /8 (35) 3 /3 (85) (5) 45/6 (0) / (64) 5 (5) 49/6 (6) 73/3 (80) H 9 4 /3 (8) 53/4 (46) 59/3 (50) 89/3 (0) R 5 6 /6 (60) 8 9/3 (0) 8 9/3 (0) /3 (33) Weight KH7-KP KH7-KPF lbs (kg) lbs (kg) 4.8 (.) 7.3 (3.3).5 (5.) 5.4 (7.0) 6.5 (7.5) 9.0 (8.6) 70.5 (3.0) 79.3 (36.0) Material Specification Item KPF Qty. KP KPF set set *Optional KP Designation centerpiece side piece flange side piece socket/ball side piece seat ring stem ball gland follower hand lever stud fastener washer hexagon nut packing hexagon nut stud fastener lock washer hexagon fastener safety washer grounding device grounding strap STM Ductile Iron 395, FEP/PF* Ductile Iron 395, FEP/PF* Steel PTFE glass PTFE Stainless Steel 35 CD-4MCu, PF Ductile Iron 395, FEP/PF, alt. LO3* Stainless Steel 35 CF8, PTFE-Graphite Galvanized, die cast metal** 93 B8 ISI PTFE/PTFE-Graphite* B8 ISI B8 ISI 304 Stainless Steel ISI 30 Stainless Steel ISI 304 **4 in (00 mm) are DIN EN 56. Torque Ratings (5) / (40) (50) 4 (00) DIN GGG40.3 DIN EN 563 GGG40.3 DIN EN DIN EN 005 PTFE glass PTFE.446/PF GGG40.3 DIN EN DIN083/PTFE-Graphite.4 DIN EN 774**.430 DIN DIN DIN7440 PTFE/PTFE-Graphite*.430 DIN DIN DIN DIN DIN DIN74.430/PVC Flow Rates 0 psi p (0 bar p) in/lbs (Nm) 7 (8) 59 (8) 03 (3) 708 (80) 50 psi p (0 bar p ) in/lbs (Nm) 7 (8) 77 (8) (3) 08 (80) Test temperature is 68 F (0 C). Test medium is water. For actuator sizing torques, refer to the Durco Technical Manual. (5) / (40) (50) 4 (00)* Cv (Kv) 5.8 (44.6) 38.7 (9.3) 33.9 (0.) 090. (938.0) Cv = US gal/min at psi P (Kv = m3/hr at bar P) *Estimated value ctuator Mounting of the KH7 Dimensions (5) / (40) (50) 4 (00) H 3 5/3 (80) 49/3 (6) 4 3/3 (0) 7 7/3 (9) H a /3 (36) /3 (4) 5/3 (55) /3 (60) 5/3 (55) /3 (60) 9/6 (65) /6 (68) b c 5/3 (37) 3/3 (93) 7/3 (47) 5 7/3 (33) 7/3 (47) 5 7/3 (33) /3 (67) 7 /8 (8) ød 7/3 (6) 3/ 3 (0) 3/3 (0) 3/ 3 (0) e 3/3 (44) /8 (54) /8 (54) 7/3 (57) f /3 (5) 5/6 (75) 5/6 (75) 35/6 (00) g 3/8 (9.5) 9/ 3 (7) 9/3 (7) 3/ 6 (0.5) SW 5/6 (8) 5/ 3 () 5/3 () 5/ 8 (6) ød 3/3 (0) 5/ 8 (6) 5/8 (6) 7/ 8 () L 9/3 (6.5) / (.5) / (.5) 5/ 8 (6) L 9/3 (7.5) / (.5) / (.5) 9/ 3 (5) ll dimensions are approximate and for illustration purposes only. For exact dimensions request certified dimensional prints. 0

21 KH5 Ceramic Lined Valves Dimensions/Weights L H R H ød D Weight lbs (kg) SME DIN SME DIN (5) 6 (5.4) 6 5 /6 (60) 4 3 /6 () 6 5 /6 (60) 9 /3 (49) (5) 7 /6 (95) 5. (6.9) 6. (7.3) / (40) 7 (78) 7 7 /8 (00) 5 9 /3 (50) 8 9 /3 (0) 9 /6 (65) 9 /6 (40) 7 3 /3 (40) 30.4 (3.8) 3.0 (4.5) (50) 8 (03) 9 /6 (30) 6 5 /6 (60) 8 9 /3 (0) 3 /3 (77) 3 /3 (50) 0 7 /3 (60) 40.8 (8.5) 4. (9.) 3 (80) 9 / (4) 7 /3 (30) 8 (05) /3 (33) 4 5 /3 () 3 /3 (77) 3 3 /6 (335) 88. (40.0) 97.0 (44.0) 4 (00) / (9) 3 5 /3 (350) 8 9 /3 (0) /3 (33) 5 5 /3 (3) 3 3 /6 (97) 4 (355).0 (55.0).0 (55.0) Material Specification Item Qty. Designation STM DIN 00 two-piece body Ductile Iron 395 GGG40.3 DIN EN body center Mg-PSZ Zirconia Ceramic Zirkonoxid/Cerconia 030 bushing Mg-PSZ Zirconia Ceramic Zirkonoxid/Cerconia 040 stem ISI 43 (Hast. C-76*or Mg-PSZ Zirconia Ceramic*).36 DIN ball Mg-PSZ Zirconia Ceramic Zirkonoxid/Cerconia 060 packing gland Stainless Steel ISI DIN adjuster Stainless Steel ISI DIN hand lever Galvanized, die cast metal.4 DIN EN stud fastener Stainless Steel STM 93 B8.430 DIN hexagon nut Stainless Steel STM DIN set chevron packing PTFE to 39 F/Grafseal to 66 F PTFE/Grafseal 0 hexagon nut Stainless Steel STM DIN stud fastener Stainless Steel STM 93 B8.430 DIN safety washer Stainless Steel ISI DIN hexagon fastener Stainless Steel STM 93 B8.430 DIN lock washer Stainless Steel ISI DIN grounding device Stainless Steel ISI DIN74 0 stop post Galvanized 83 B.0037 DIN EN hexagon fastener Stainless Steel 93 B8.430 DIN flat gasket Gylon Fawn to 39 F/Grafseal to 66 F Gylon Fawn/Grafseal 40 flat gasket Gylon Fawn to 39 F/Grafseal to 66 F Gylon Fawn/Grafseal 50 flat gasket Gylon Fawn to 39 F/Grafseal to 66 F Gylon Fawn/Grafseal *Optional These dimensions pertain to KH5 valves with either stainless steel or Hastelloy C-76 stems. Connection dimensions according to DIN 50-PN6 (NSI B6.5 Class 50). Torque Ratings 44 psi p 87 psi p 50 psi p 35 psi p (3 bar p) (6 bar p ) (0 bar p) (6 bar p) in/lbs (Nm) in/lbs (Nm) in/lbs (Nm) in/lbs (Nm) (5) 7 (3) 3 (3,5) 44 (5) 7 (8) / (40) 53 (6) 84 (9,5) 93 (0,5) 64 (8,5) (50) 97 () 86 () (5) 407 (46) 3 (80) 443 (50) 84 (95) 06 (5) 947 (0) 4 (00) 487 (55) 06 (5) 460 (65) 4 (40) Test temperature is 68 F (0 C). Test medium is water. For actuator sizing torques, refer to the Durco Technical Manual. Flow Rates C v (K v ) (5) 50.4 (43.4) / (40) 37.3 (8.) (50) 6.6 (95.0) 3 (80) (53.5) 4 (00) (85.6) C v = US gal/min at psi P (K v = m 3 /hr at bar P) ctuator Mounting of the KH5 Ceramic Valve Dimensions D t H H3 D ød ød F R R øk SW n-øh Deep ISO (5) /8 (3) 9 /3 (7,5) 3 /3 (9,5) 7 /3 (3) 3 /3 (0) 3 /8 (35) 9 /6 (65) /3 (4) 5 /8 (6) /3 (9) (50) 5 /6 (8) 4-M6 5 /6 (8) F05 / (40) /8 (3) 3 /3 (0) / (,5) 9 /6 (40) 5 /8 (6) 7 /3 (55) 3 7 /3 (90) 9 /3 (58) 5 /3 (0) 3 /3 (0) 3 /4 (70) 5 /3 () 4-M6 5 /3 () F07 (50) /8 (3) 3 /3 (0) / (,5) 7 /3 (39) 5 /8 (6) 7 /3 (55) 3 7 /3 (90) 9 /3 (58) 5 /3 (0) 3 /3 (0) 3 /4 (70) 5 /3 () 4-M8 5 /3 () F07 3 (80) /8 (3) 5 /3 (3) 5 /8 (5,5) 7 /3 (47) 7 /3 () 3 /4 (70) 5 (5) 3 (75) (6) 5 /3 (3) 4 (0) 5 /8 (6) 4-M8 9 /3 (5) F0 4 (00) /8 (3) 5 /3 (3) 5 /8 (5,5) 7 /3 (47) 7 /3 () 3 /4 (70) 5 (5) 3 (75) (6) 5 /3 (3) 4 (0) 5 /8 (6) 4-M0 9 /3 (5) F0 ll dimensions are approximate and for illustration purposes only. For exact dimensions request certified dimensional prints.

22 V-0 (US) pp4-8 //0 4:4 PM Page Dan K. Snelson V-0 Disk : T E C H N I C L D T PN/T Sampling Valves PN/SG Sampling Valves/ Sight Glass PN/T PN/SG R R GL H t ØD GL t ØD G G L L 050 L L L L3 H L L3 Connection dimensions according to DIN 50-PN6 (NSI B6.5 Class 50). Dimensions DIN (PN/T) L L (5) 55 6 (5) (6) (50) (4) (74) 3 (80) (44) (89) L L (79) (60) 33 6 (97) 9 6 (30) 33 6 (97) 7 3 (30) H R 45 3 (0) (60) (60) 8 4 (0) (60) 8 4 (0) GL DIN 68 GL3 GL45 GL45 t 9 3 (5) 3 3 (8) 3 3 (8) G (in) G 8 G 8 G 8 ød 5 3 (0) (38) (38) Sampling Weight Vol. cm3 lbs (kg) (7.) (30.4) H 45 3 (0) (45) (60) (60) R (60) 8 4 (0) 8 4 (0) 8 4 (0) GL DIN 68 GL3 GL45 GL45 GL45 t 9 3 (5) 3 3 (8) 3 3 (8) 3 3 (8) G (in) G 8 G 8 G 8 G 8 ød 5 3 (0) 4 (3) (38) (38) Sampling Vol. cm H 45 3 (0) (45) (60) (60) R (60) 8 4 (0) 8 4 (0) 8 4 (0) GL DIN 68 GL3 GL45 GL45 GL45 t 9 3 (5) 3 3 (8) 3 3 (8) 3 3 (8) G (in) G 8 G 8 G 8 G 8 ød 5 3 (0) 4 (3) (38) (38) Sampling Weight Vol. cm3 lbs (kg) (5.9) (9.3) (.9) (6.) Dimensions DIN (PN/SG) L (5) 8 (03) (40) (39) (50) (78) /3 (50/80) (340) L (38) 6 (65) (83) (5) L L (79) (60) (9 ) (00) (97) 9 6 (30) (97) 7 3 (30) Weight lbs (kg) 4.5 (6.6) 5.3 (.5) 33.9 (5.4) 6.6 (8.0) Dimensions SME (PN/SG) L (5) 8 (03) (40) 93 3 (39) (50) (78) /3 (50/80) (340) L L 55 6 (38) 33 3 (79) 6 (65) 35 8 (9) (83) 33 6 (97) 85 3 (5) 33 6 (97) L3 6 (5.4) 7 (78) 8 (03) 9 (4) Material Specification (PN/T & PN/SG) Item Qty. Designation *Optional 4 4 center piece body piece flange side piece spacer flange hexagon nut stud bolt flat gasket glass seat ring stem ball STM DIN 395. FEP/PF* 395. FEP/PF* 74 GGG-40.3 DIN EN 563 GGG-40.3 DIN EN DIN EN 005 PTFE PTFE GGG-40.3 DIN EN DIN DIN 7440 DIN 3535/4 DIN 7080 PTFE.446 GGG-40.3 DIN EN B8 sbestos free Borosilicate glass 35 CD4MCU/PF 395/PF Item Qty. Designation gland follower hand lever socket head cap screws 4 stud bolts (PN/SG) 4 hexagon nut set packing material (chevron) hexagon nut 3 stud bolt lock washer hexagon bolt serrated lock washer grounding device STM DIN 35 CF-8 Galvanized die cast metal 93 B8 93 B PTFE.4308 DIN EN DIN EN DIN DIN DIN B8 ISI B8 ISI 304 ISI DIN DIN DIN DIN DIN DIN 74 ll dimensions are approximate and for illustration purposes only. For exact dimensions request certified dimensional prints.

23 SG Sight Glass Dimensions/Weights L mm (in) ød Weight kgs (lbs) STM DIN STM DIN (5) 6 (5.4) 6 5 /6 (60) 3 /3 (45) 0.4 (4.7).5 (5.) / (40) 7 (78) 7 7 /8 (00) 9 /3 (58) 5. (6.9) 0. (9.) (50) 8 (03) 9 /6 (30) 3 (77) 4.9 (.3) 7.6 (.5) (65) 3 /3 (90) 3 (77) 33. (5.0) 3 (80) 9 / (4) 7 /3 (30) 3 5 /6 (00) 39.7 (8.0) 43.6 (9.8) 4 (00) / (9) 3 5 /3 (350) 5 (5) 6. (8.) 6.9 (8.) 6 (50) 8 9 /3 (480) 7 (75 ) 34.4 (6.0) Flow Rates C v (K v ) (5) 3.7 (7.3) / (40) 95.9 (8.5) (50) 46. (5.8) (65) 50.4 (5.4) 3 (80) 384. (330.5) 4 (00) (55.) (50) 43.5 (4.7) Cv = US gal/min at psi P (Kv = m 3 /hr at bar P ) Material Specification Item Qty. Designation STM DIN body Ductile Iron STM 395, FEP/PF* GGG-40.3 DIN EN 563 flange Ductile Iron STM 395 GGG-40.3 DIN 3N glass Borosilicate Glass DIN gasket Universal, asbestos free DIN 3535/ stud fastener STM 93 B DIN hexagon nut STM DIN 7440 *Optional Connection dimensions according to DIN 50-PN6 (NSI B6.5 Class 50). SG3 3-Way Sight Glass Material Specification Item Qty. Designation STM DIN 0 body Ductile Iron/FEP 395* GGG-40.3 DIN EN 563 Ductile Iron/PF 395* GGG-40.3 DIN EN flange Ductile Iron 395 GGG-40.3 DIN EN glass Borosilicate-Glass DIN flat gasket Free of asbestos DIN set stud bolt Stainless Steel 93 B8.430 DIN set hexagon nut Stainless Steel DIN 7440 *Optional Dimensions L L ød Weight lbs (kg) (5) (60) (80) 5 3 (45) (6.34) (50) 9 6 (30) (5) 3 3 (77) 33 3 (5.3) 3 (80) 7 3 (30) 6 8 (55) (00) (6.7) 4 (00) (350) (75) (5) (8.) Connection dimensions according to DIN 50-PN6 (NSI B6.5 Class 50). ll dimensions are approximate and for illustration purpose only. For exact dimensions, request certified dimensional prints. 3

24 V-0 (US) pp4-8 //0 4:4 PM Page 4 Dan K. Snelson V-0 T E C H N I C L Disk : D T SG4 4-Way Sight Glass Material Specification Item Qty. Designation STM set set body flange glass flat gasket stud bolt hexagon nut DIN Ductile Iron/FEP 395 Ductile Iron/PF 395 Ductile Iron 395 Borosilicate-Glass Free of asbestos Stainless Steel 93 B8 Stainless Steel 94 8 GGG-40.3 DIN EN 563 GGG-40.3 DIN EN 563 GGG-40.3 DIN EN 563 DIN 7080 DIN DIN DIN 7440 Dimensions L ød Weight lbs (kg ) (5) 65 6 (60) 5 3 (45) 6,5 (7,5) (50) 9 6 (30) 3 3 (77) 40,4 (8,38) Connection dimensions according to DIN 50-PN6 (NSI B6.5 Class 50). RL 45 (Y) Check Valves Material Specification Item Qty. Designation 0 body flange ball stud bolt hexagon nut flut gasket STM DIN Ductile Iron/FEP 395* Ductile Iron/PF 395* Ductile Iron 395 PTFE - Solid Bal Stainless Steel 93 B8 Stainless Steel 94 8 Free of asbestos GGG-40.3 DIN EN 563 GGG-40.3 DIN EN 563 GGG-40.3 DIN EN 563 Pure - PTFEl.430 DIN DIN 7440 DIN *Optional Dimensions (5) (40) (50) 3 (80) 4 Connection dimensions according to DIN 50-PN6 (NSI B6.5 Class 50). L b D (60) 3 (6.5) 47 3 (5) (00) 5 3 (0) 59 3 (50) 9 6 (30) 5 3 (0) 6 (65) 3 6 (30) 3 3 (5) (00) k 3 3 (85) 4 3 (0) (5) (60) S S 8 (3) 5 6 (3.5) (4) 3 (4) 5 3 (4) 5 3 (4.5) (5) 3 (5) ll dimensions are approximate and for illustration purpose only. For exact dimensions, request certified dimensional prints.

25 RV/SG Check Valves/Sight Glass Combination Dimensions/Weights L ød Weight lbs (kgs) SME DIN SME DIN (5) 6 (5.4) 6 5 /8 (60) (5) 9 /3 (33) 0.4 (4.7).7 (5.3) / (40) 7 (78) 7 7 /8 (00) /4 (3) 5 /3 (45) 9.8 (9.0) 4. (.0) (50) 8 (03) 9 /6 (30) 9 /6 (40) 9 /6 (65) 3.8 (0.8) 6.9 (.) 3 (80) 9 / (4) 7 /3 (30) 9 /6 (65) 3 5 /3 (80) 40. (8.) 46.7 (.) 4 (00) / (9) 3 5 /3 (350) 3 5 /3 (80) 3 5 /6 (00) 6. (8.) 63.0 (8.6) Material Specification Item Qty. Designation STM DIN body Ductile Iron STM 395. FEP/PF* GGG-40.3 flange Ductile Iron STM 395 GGG glass Borosilicate Glass DIN gasket sbestos free DIN 3535/ stud fastener STM 93 B8.430 DIN hexagon nut STM DIN ball PTFE PTFE 8 ball guide PTFE PTFE *Optional Flow Rates C v (K v ) (5) 4.5 (.5) / (40) 30. (5.9) (50) 55.9 (48.) 3 (80) 0.9 (95.4) 4 (00) 85. (59.3) Cv = US gal/min at psi P (Kv = m 3 /hr at bar P) Connection dimensions according to DIN 50-PN6 (NSI B6.5 Class 50). RV Check Valves Dimensions/Weights L D Weight lbs (kgs) SME DIN DIN SME / (5) 5 (30) 5 /8 (30) 4 /8 (05) 7.3 (3.3) 7.5 (3.4) 3 /4 (0) 6 (50) 5 9 /3 (50) 4 /8 (05) 8. (3.7) 8.8 (4.0) (5) 6 (5.4) 6 5 /8 (60) 5 / (40). (5.5) 4.3 (6.5) (3) 7 3 /3 (80) 5 9 /3 (50) 8. (8.) / (40) 7 (78) 7 7 /8 (00) 6 / (65) 0.5 (9.3) 4. (.0) (50) 8 (03) 9 /6 (30) 7 9 /3 (85) 30. (3.7) 30.4 (3.8) (65) 3 /3 (90) 8 /3 (0) 47.8 (.7) 3 (80) 9 / (4) 7 /3 (30) 9 7 /3 (50) 65.9 (9.9) 67. (30.5) 4 (00) / (9) 3 5 /3 (350) 7 /3 (85) 90.4 (4.0) 9.6 (4) 6 (50)* 4 (356) 4 (356) 5 5 /6 (404) 67.7 (76.) 7.9 (78) 8 (00)* 8 (457) 8 (457) 0 /4 (55) (66.0) 34.6 (55.0) *Face to Face Dimensions acc. to NSI B6.0. Material Specification Item Qty. Designation STM DIN body piece Ductile Iron STM 395, FEP/PF* GGG-40.3 body piece Ductile Iron STM 395, FEP/PF* GGG ball PTFE PTFE 4 4- stud fastener STM 93 B8.430 DIN hexagon nut STM DIN7440 *Optional Flow Rates - C v (K v ) / (5) 8. (7.0) 3 /4 (0) 8.6 (6.0) (5) 7.3 (3.5) (3) 46.8 (40.3) / (40) 67.4 (58.0) (50) 45.3 (5.0) (65) 08.3 (79.) 3 (80) 36.6 (7.4) 4 (00) (493.7) 6 (50) 46.9 (07.8) 8 (00) 90.7 (970)* Connection dimensions according to DIN 50-PN6 (NSI B6.5 Class 50). ll dimensions are approximate and for illustration purpose only. For exact dimensions, request certified dimensional prints. 5

26 V-0 (US) pp4-8 //0 4:4 PM Page 6 Dan K. Snelson V-0 Disk : T E C H N I C L D T How to Order tomac Lined Valves and Valve Equipment How To Specify tomac Fully Lined Ball Valves capability. The ball must also be fully coated and be of the free floating design sealing on replaceable PTFE seats. The valve stem shall be a CD4MCu (.446) insert coated with PF, have a cast in shoulder and be internally installed into a lined recess in the body to prevent blowout. The valve stem seal must be a deep stuffing box design with chevron stem packing and have independent packing adjustment by a gland with PTFE-graphite bearing. Product marking must be in accordance with MSS-SP5, permanently serialized and color coded for quick liner identification. Ball valves shall be SME Class 50 (PN6) fully fluorocarbon lined and have a two-piece ductile cast iron body to GGG-40.3 (STM 395) or stainless steel. Flanges shall conform to SME B6.5 (DIN 50) and faceto-face dimensions to SME B6.0 (DIN 30/F) long pattern for full port and short pattern for standard port. It shall have an integral universal actuator mounting pad in accordance with ISO 5. The body liner must be held in place internally as well as on the flange face with T slot locking grooves and have full vacuum rating In order to follow Flowserve s commitment to continuous improvement, we reserve the right to change product and performance specifications without notice. How To Order Example 4 in (00 mm) KH full port valve with FEP liner and encapsulated ball. 4 KH FEP Ball Valves Model Liner Material Body Material Full port, SME Standard port, SME Full port, DIN 3-way Tank drain in-6 in (5 mm-50 mm) in- in (5 mm-305 mm) / in- in (3 mm-305 mm) in-3 in (5 mm-80 mm) in x in (5 mm-50 mm) 4 in x 6 in (00 mm-50 mm) in-4 in (5 mm-00 mm) KH KH3 KH MP3 KH6 PF, FEP, PP PF, FEP, PP, PVDF PF, FEP, PP PF PF, FEP, PP PF, FEP, PP PF, FEP PF, FEP PF, FEP PF, FEP PF, FEP PF, FEP PF, FEP PF, FEP PF, FEP Glass pipe KH7 Other Equipment / in-8 in (5 mm-00 mm) Check valve RV 45 Y in-3 in (5 mm-80 mm) RL Sight glass, -way in-6 in (5 mm-50 mm) SG Sight glass, 3-way in-4 in (5 mm-00 mm) SG3 Sight glass, 4-way SG4 Check/sight glass in-6 in (5 mm-50 mm) RVSG Sampling in-3 in (5 mm-80 mm) PN/T Sampling/sight glass in-3 in (5 mm-80 mm) PN/SG Strainer in-6 in (5 mm-50 mm) SF *Note: For in (5 mm) KH3 valve, specify CV or 6 or 4. Ceramic Lined Valves in-4 in (5mm-00mm) Example in (50 mm) KH5 ceramic lined valve with ceramic ball, 36 stainless steel stem and PTFE gasketry. 6 Model KH5 Stem C=ceramic S=36SS HC=Hastelloy C KH5 S 00 Hastelloy is a registered trademark of Hayes International. Grafoil is a registered trademark of Union Carbide. Gasket 00=PTFE 350=Grafoil Options Double Special Ball for sizes " 3" Stuffing Box V C Ceramic CV CB CER DB/SB CV* CB CER DB/SB CV CB CER DB/SB

27 Index ctuation Options 7 KH Full Port 3 Technical Data 4,5 KH NSI Full Port,3 Technical Data 7 KH3 Standard Port,3 Technical Data 8 KH5 Ceramic Lined Valves 5 Technical Data KH6 Fully Lined Tank Drain Valves 9 Technical Data 9 KH7 for Glass Pipe Systems 8 Technical Data 0 MP3 3-Way Lined Valves 4 Technical Data 9 PN/T and PN/SG Lined Sampling Valves 0 Technical Data RV/SG Lined Check Valves/Sight Glass Technical Data 5 RV and RL Lined Check Valves Technical Data 4,5 SF Lined Strainer 3 Technical Data 6 SG Lined Sight Glass Technical Data 3,4 Chlorine Service 3 Contact Information 8 Control Valves, vailable Options 3 Packages 3 Extended Packing 3 Pressure/Temperature Ratings 6 Vacuum/Temperature Ratings 6 V-Port Control Valves 6 How to Order 6 How to Specify 6 Selection, Installation, Operation and Maintenance lthough Flowserve can, and often does, provide general guidelines, it is obviously not possible to provide application specific data and warnings for all conceivable applications. The purchaser/end user must therefore assume the ultimate responsibility for the proper selection, installation, operation and maintenance of the products. Read the appropriate IOM available from Flowserve haus GmbH before installing, operating or repairing any valve. The purchaser/end user should train its employees and/or contractors in the safe use of the Flowserve products in connection with the purchaser s manufacturing processes. Design Changes In order to follow Flowserve s commitment to continuous improvement, we reserve the right to change product and performance specifications without notice. For actuating options see page 7. 7

28 T O M C Flowserve has the answer to your corrosion resistant, quarter-turn valving needs. Clockwise from top right. Durco BTV-000 PTFE or UHMWPE lined chemical service valve tomac Lined ball valves NSI/ISO, standard and full port Specialty valves Valve products and accessories Durco Sleeveline Non-lubricated, PTFE-sleeved plug valves G4 Isolation G4E DIN Mounting Pad G4 Marathon TSG4 Severe Service Durco T-Line Non-lubricated, PTFE-lined plug valves Big Max Butterfly High performance valves Durco Microfinish lloy ball valves utomax Valve automation systems ctuators Controls with smart technology ccessories For more information, contact: Flowserve Corporation Flow Control Division 978 Foreman Drive Cookeville, Tennessee 3850 Phone: Fax: Or Consult Your Local Stocking Distributor Flowserve haus GmbH Von Braun Strasse 9a D haus Germany Phone: Fax: Flowserve Pte. Ltd. Tuas venue 0 Republic of Singapore Phone: Fax: Printed in U.S.. November 00 Flowserve Corporation