Technical Manual. Register 8 CONTENTS - ARV2
|
|
|
- Howard Morrison
- 6 years ago
- Views:
Transcription
1 Page: 1 Register 8 CONTENTS - ARV2 Contents Page Technical Data ARV2-DIN... 2 Technical Data ARV2-ANSI... 3 Material Specification ARV Dimensions ARV2-DIN... 5 Dimensions ARV2-ANSI... 6 Spare Parts ARV Assembly Instructions ARV Disassembly Instructions ARV ARV2 - Recommended Tightening Torques... 9 ARV2 - K v and C v - Data... 10
2 Page: 2 Technical Data ARV2 Face-to-Face Dimensions DIN EN (Basic series 1) Flange Connections DIN PN 16 DN 200- DIN PN 10 Tightness test DIN EN (leak rate B) DN / DIN L ØD weight * 200* mm kg 3,5 inch 5,12 4,13 lbs 7,7 mm kg 3,9 inch 5,91 4,13 lbs 8,6 mm kg 6,5 inch 6,3 5,51 lbs 14,3 mm kg 8,2 inch 7,09 5,91 lbs 18,1 mm kg 11,0 inch 7,87 6,5 lbs 24,3 mm kg 13,7 inch 9,06 7,28 lbs 30,1 mm kg 21,2 inch 11,42 8,66 lbs 46,8 mm kg 32,6 inch 12,2 9,84 lbs 71,8 mm kg 42,0 inch 13,78 11,22 lbs 92,5 mm kg 80,0 inch 14 15,55 lbs 176,0 mm kg 195,0 inch 18 20,28 lbs 430,0 * Face-to-Face Dimensions acc. ANSI B 16.10
3 Page: 3 Technical Data ARV2 Flange Connections ANSI B lbs Tightness test DIN EN (leak rate B) DN / ANSI L ØD weight ½" ¾" 1" 1½" 2" 3" 4" 6" 8" inch 5,16 4,13 lbs 7,5 mm kg 3,4 inch 5,91 4,13 lbs 8,4 mm kg 3,8 inch 6 5,51 lbs 13,2 mm 152,4 140 kg 6,0 inch 7 6,5 lbs 20,5 mm kg 9,3 inch 8 7,3 lbs 29,1 mm kg 13,2 inch 9,5 9,84 lbs 61,6 mm kg 28,0 inch 11,5 11,22 lbs 92,5 mm kg 42,0 inch 14 15,55 lbs 171,8 mm kg 78,0 inch 18 20,28 lbs 365,0 mm kg 166,0
4 Page: 4 Material specification ARV2 No. Designation Pieces Material Material-No. DIN ASTM / AISI 010 body piece 1 ductil iron / PFA EN-JS1049 (GGG-40.3 ) / A 395 ductil iron / FEP DIN EN body piece 1 ductil iron / PFA EN-JS1049 (GGG-40.3 ) / A 395 ductil iron / FEP DIN EN ball 1 PTFE-solid ball pure-ptfe 040 stud bolt 1 set stainless steel / DIN A 193 B8 050 hexagon nut 1 set stainless steel / DIN A otional
5 Page: 5 Dimensions ARV2 DN / DIN L b ØD Øk nxød S1 S2 S * 200* mm x14 3,5 3,5 3,5 inch 5,12 0,55 3,74 2,56 4x0,55 0,14 0,14 0,14 mm x14 3,5 3,5 3,5 inch 5,91 0,59 4,13 2,95 4x0,55 0,14 0,14 0,14 mm , x14 3,5 3,5 4 inch 6,3 0,65 4,53 3,35 4x0,55 0,14 0,14 0,16 mm x inch 7,09 0,71 5,51 3,94 4x0,71 0,16 0,16 0,16 mm x inch 7,87 0,75 5,91 4,33 4x0,71 0,16 0,16 0,16 mm , x inch 9,06 0,81 6,5 4,92 4x0,71 0,16 0,16 0,16 mm x18 4 4,5 4 inch 11,42 0,87 7,28 5,71 4x0,71 0,16 0,18 0,16 mm x18 4 4,5 4 inch 12,2 0,98 7,87 6,3 8x0,71 0,16 0,18 0,16 mm x inch 13,78 1,06 8,66 7,09 8x0,71 0,16 0,2 0,16 mm ,5 279, x inch 14 1,2 11 9,45 8x0,87 0,16 0,24 0,16 mm , x inch 18 1,44 13,5 11,61 8x0,87 0,16 0,24 0,16 * Face-to-Face Dimensions acc. ANSI B, 16.10
6 Page: 6 Dimensions ARV2 DN / ANSI L b ØD Øk nxød S1 S2 S3 ½" ¾" 1" 1½" 2" 3" 4" 6" 8" inch 5,16 0,55 3,5 2,38 4x0,63 0,14 0,14 0,14 mm ,9 60,5 4x16 3,5 3,5 3,5 inch 5,91 0,59 3,88 2,75 4x0,63 0,14 0,14 0,14 mm ,5 70 4x16 3,5 3,5 3,5 inch 6 0,63 4,25 3,13 4x0,63 0,14 0,14 0,16 mm 152, ,9 79,2 4x16 3,5 3,5 4 inch 7 0,98 5 3,88 4x0,63 0,16 0,16 0,16 mm ,5 4x inch 8 0,81 6 4,75 4x0,75 0,16 0,16 0,16 mm ,5 152,4 120,5 4x inch 9,5 0,98 7,5 6 4x0,75 0,16 0,18 0,16 mm ,5 152,5 4x19 4 4,5 4 inch 11,5 11,4 9 7,5 8x0,75 0,16 0,2 0,16 mm ,6 190,5 8x inch 14 1,2 11 9,5 8x0,87 0,16 0,24 0,16 mm ,5 279,4 241,5 8x inch 18 1,44 13,5 11,75 8x0,87 0,16 0,24 0,16 mm ,5 342,9 298,5 8x
7 Page: 7 Spare Parts (item n ) - ARV2 DIN ANSI ball PTFE 015 ½" ¾" " ½" " " " " "
8 Page: 8 Assembly Instructions ARV2 The general installation and maintenance instructions must be observed. 1. Put the body piece (010) on a work bench with a soft cover (rubber mat). 2. Insert ball (030) carefully into body piece (010). 3. During assembly of the two body pieces (020) and (010), it is important that the ball guide rails are laying exactly opposite to each other. 4. Assemble body bolts (040) and nuts (050). Tighten them by criss-cross method acc. to the recommended torques. Disassembly Instructions ARV2 For all jobs which are to be carried out on an installed valve, the works safety requirements and the general installation and maintenance instructions for fluorcarbon resin lined atomac valves must be observed. 1. Prior to disassembly, the valve must be drained of all line media, acc. to the above-mentioned instructions. After having removed the flange connection, put valve on workbench with soft cover (rubber mat). 2. Remove hexagon nuts (050). 3. Remove body piece (020) from side piece (010). 4. Remove ball (030). Inspect ball on damages (replace ball, if necessary). 5. Inspect ball seat on damages (replace side piece (010) if (necessary).
9 Page: 9 ARV2 - recommended tightening torques* tie rods DN (040/050) * max. value connection flange Nm in.lbs Nm in.lbs ½" ¾" " ½" " " " " "
10 Page: 10 ARV2 - K v Data and C v Data (DIN EN ) DIN ANSI K V m³/h C V gal/min 015 ½" 7,0 8,1 020 ¾" 16,0 18, " 23,5 27, ,3 46, ½" 58,0 67, " 125,0 145, ,2 208, " 272,4 316, " 493,7 573, " 1072,8 1246, " 1870,0 2173,5
Technical Manual. Register 24 CONTENTS - ARV2-TAT (TAT = Type Acceptance Testing)
Page: 1 Contents Register 24 CONTENTS - ARV2-TAT (TAT = Type Acceptance Testing) Page Technical Data ARV2-TAT-DIN...2 Technical Data ARV2-TAT-ANSI...3 Material Specification ARV2-TAT...4 Dimensions ARV2-TAT-DIN...5
Technical Manual. Register 10 CONTENTS - ASG
Page: 1 Contents Register 10 CONTENTS - ASG Page Technical Data ASG-DIN...2 Technical Data ASG-ANSI...3 Material Specification ASG...4 Dimensions ASG-DIN...5 Dimensions ASG-ANSI...6 Spare Parts ASG...7
Technical Manual. Register 25 CONTENTS - AKH2-TAT
D-88 Ahaus Postfach 112 D-81 Ahaus Telefon: +9(0) 21-8-100 Fax: +9(0) 21-8-200 Register: 2 Page: 1 Date: 0.2008 Contents Register 2 CONTENTS - AKH2-TAT (TAT = Type Acceptance Testing) Page Technical Data
Technical Manual. Register 2 CONTENTS - AKH2
Page: 1 Contents Register 2 CONTENTS - AKH2 Page Technical Data AKH2-DIN...2 Technical Data AKH2-ANSI...3 Material Specification AKH2...4 Dimensions AKH2-DIN...5 Dimensions AKH2-ANSI...6 Spare Parts AKH2
Technical Manual. Register 12 CONTENTS - AKH2.2
Page: 1 Contents Register 12 CONTENTS - AKH2.2 Page Technical Data AKH2.2-DIN... 2 Technical Data AKH2.2-ANSI... 3 Material Specification AKH2.2... 4 Dimensions AKH2.2-DIN... 5 Dimensions AKH2.2-ANSI...
Technical Manual. Register 18 Contents - T4E
Page: 1 Contents Register 18 Contents - T4E Page Technical Data T4E-1, DN½ to DN6...2 Technical Data T4E-1, DN8 to DN12...3 Technical Data T4E-2, DN15 to DN150...4 Technical Data T4E-2, DN200 to DN300...5
Atostar. For Clean Production And A Clean Environment. FCD ATETB (Bulletin VA-11 [E/A4]) Quality System Certificate
![Atostar. For Clean Production And A Clean Environment. FCD ATETB (Bulletin VA-11 [E/A4]) Quality System Certificate](/thumbs/87/96465215.jpg "Atostar. For Clean Production And A Clean Environment. FCD ATETB (Bulletin VA-11 [E/A4]) Quality System Certificate")
Atostar S T A I N L E S S S T E E L, F L U O R C O P O L Y M E R L I N E D B A L L V A L V E S A S M E D I N J I S For Clean Production And A Clean Environment Quality System Certificate FCD ATETB0011-00
Unlined valves with flanged ends
Main Parts and Materials Unlined valves with flanged ends NO. PART MATERIA 1 2 DIAPHRAGM BODY WC_ Cast Iron EN-J1040 (GG25) WD_ RUBBER Ductile Iron EN-JS1030 (GGG40) Natural (D10) / EPDM (D20) / Butyl
These PFA and PTFE lined products offer a reliable solution in hazardous applications
These PFA and PTFE lined products offer a reliable solution in hazardous applications Features Check valves Heavy duty body in ductile iron GGG4.3 (ASTM A-395). Heavy duty PFA or PTFE lining. Borosilicate
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
Technische Dokumentation Technical Documentation
Technische Dokumentation Technical Documentation Fully Lined Sampling Valves XOMOX International GmbH & Co. OHG Dok. Nr.: tdb_sample_gb Von-Behring-Straße 15 D-88131 Lindau / Deutschland Januar 2008 Fully
Weir Type Diaphragm Valves - DIAVAL SERIES W
when necessary. Valves close by turning the handwheel clockwise. Valves are bolted bonnet, seatless design, with a diaphragm as closure element, with rising handwheel. Valves are offered with a broad range
Type 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.
Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing
TECHNICAL DATA SHEET XLB - Lined Ball Valves
brands you trust. TECNICAL DATA SEET XLB - Lined Ball Valves INDEX: XLB24A Page 2 XLB12A Page 3 XLB13A Page 4 XLB42A Page 5 XLB35A Page 6 XLB32A Page 7 FLOW CARACTERISTICS Page 8 PRESSURE/VACUUM TEMPERATURE
BUTTERFLY VALVE 1234P SERIES
FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BUTTERFLY VALVE 1234P SERIES With pneumatic actuator
Technische Dokumentation Technical Documentation
Technische Dokumentation Technical Documentation XOMOX Fully Lined Check Valves Dok. Nr.: tdb_check_gb XOMOX International GmbH & Co. Von-Behring-Straße 15 D-88131 Lindau / Deutschland Januar 2008 Table
Technical data Pressure (bar) : 10 Temperature ( C) : Sizes (mm) : Flange accommodation : DIN PN 10/(16)
50 300 mm wafer and lugged lined butterfly valves - Coilspring shaft sealing A PTFE lined solution according ISO 5752/5 short (EN 558-1/T5) with various corrosion resistant disc materials to satisfy demanding
3-way control valve in mixing and diverting design
with electric and pneumatic actuators 3-way control valve in mixing and diverting design 1/2-6 STEVI 450 / 451 Electric actuator Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
BALL SECTOR VALVE of stainless steel 455 (459) series
Operation C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and
611, 671. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features
CHEMAT. Two-Piece Ball Valves Series CAPRO type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18)
type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18) CHEMAT High quality requirements and technical standards of the chemical industry have been used as basic design parameters for these
with electric and pneumatic actuators Stop valve in straightway form DN ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE
with electric and pneumatic actuators Stop valve in straightway form DN 300-500 ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE Electric multiturn actuator capable of high closing pressures Enclosure
611, 671. Diaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.0.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic
BR 10a Control and Shut-off Butterfly valve
M-PTFE lined double-eccentric BR 10a Control and Shut-off Butterfly valve Application: Tight-closing, double-eccentric butterfl y control valve with M-PTFE lining for process engineering and plants with
ARI-FABA -ANSI LongLife Stop valve with bellows seal
Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -ANSI LongLife - Class 150 Straight through with flanges German TA - Luft TÜV-Test-No. 088-945053
Swing Check Valves - Series 41
Tender Text Data Sheets Swing Check Valves - Series 41 The swing check valves are typically installed after a pump unit in order to prevent the water from flowing back through the pump, when it stops.
BALL SECTOR VALVE of stainless steel 455 (459) series
Operation C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T Reversible pneumatic actuator
marine cargo systems Edition:
Butterfly valves for Si-206 EN marine cargo systems Edition: 2007-05 Type MTV Type MTVL Wafer design Lugged design Nominal pressure PN 10-25 ANSI 150 Nominal size DN 80-400 Material Stainless steel The
NEW & IMPROVED! Xomox Fully Lined Ball Check Valve.
NEW & IMPROVED! Xomox Fully Lined Ball Check Valve Features and Benefits The NEW Xomox Fully Lined Ball Check Valve Offers: Equipment and Process Protection: Improve protection of your critical equipment
with electric and pneumatic actuators Control valve in 3-way-form (3-way mixing valve) DN 300 ARI-STEVI 423 Electric actuator ARI-PREMIO
with electric and pneumatic actuators Control valve in 3-way-form (3-way mixing valve) DN 300 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches Handwheel Additional devices available, e.g.
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP
with electric and pneumatic actuators Control valve straight through with V-port plug DN ARI-STEVI 425 / 426
with electric and pneumatic actuators Control valve straight through with V-port plug DN 300-500 ARI-STEVI 425 / 426 Electric actuator AUMA SAR with LE Electric multiturn actuator capable of high closing
ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T. Electric actuator ARI-PREMIO 2,2-25 kn ARI-PREMIO-Plus 2G 2,2-25 kn
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP
Type 455, 456. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 455, 456 Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 468.08-E 462.01-D 40 Cap H2 19 Lock nut 18 Adjusting screw 16 Upper spring plate 9 Bonnet 12 Spindle 54
Richter Ball Control Valves Torque transmission free of play
Richter Ball Control Valves Torque transmission free of play ISO/DIN, ASME/ANSI Lining PFA, optionally PFA-P, PFA-HP, PFA-L k vs 0.1-400 ENVIPACK seal maintenance-free Heavy-duty ball control valves with
Richter Ball Control Valves Torque transmission free of play
Richter Ball Control Valves Torque transmission free of play KNR KNAR KNR, KNAR, KNRP, KNARP KNR KNAR ISO/DIN, ASME/ANSI Lining PFA, optionally PFA-L, PFA-HP k vs 0.1-400 Maintenance-free ENVIPACK stem
Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
ARI-Strainer. ARI-Strainer - Screen and supporting basket made of stainless steel. ARI-Strainer - Y-pattern with flanges
ARI-Strainer ARI-Strainer - Screen and supporting basket made of stainless steel ARI-Strainer - Y-pattern with flanges TRB 801 Annex II No. 45 (except EN-JL1040) EN ISO 15848-1 / TA - Luft TÜV-Test-No.
Pressure reducing valve Pressure reducing valve in straightway form DN
Pressure reducing valve Pressure reducing valve in straightway form DN 15-150 ARI-PREDU Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Grey cast
ISO-DE Double Eccentric Butterfly Valves
ISO-DE Double Eccentric Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 401 South Highland Avenue Aurora, Illinois 60506-5563 www.henrypratt.com phone: 630.844.4000 moreinfo@henrypratt.com
HEAVY-DUTY BALL VALVES
HEAVY-DUTY BALL VALVES SHUT-OFF, CONTROL & DRAIN VALVES KN, KNA, KNR, KNAR, KA-N, KK SUPERIOR CORROSION RESISTANCE RELIABLE DESIGN MAINTENANCE-FREE ENVIPACK STEM SEALING -60 TO +200 C (-75 TO +400 F) KN,
Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
Control valve - 3-way with flanges (3-way mixing valve / 3-way diverting valve) DN 200 and 250
with electric and pneumatic actuators Control valve - 3-way with flanges (3-way mixing valve / 3-way diverting valve) DN 200 and 250 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches Handwheel
Richter Ball Control Valves Torque transmission free of play
Richter Ball Control Valves Torque transmission free of play KNAR, KNR, KNARP, KNRP ASME/ANSI, ISO/DIN Lining PFA, optionally PFA-P, PFA-HP, PFA-L Cv 0.12-470 (k vs 0.1-400) Maintenance-free ENVIPACK stem
Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
ARI-Strainer. Strainer - Screen and supporting basket made of stainless steel. ARI-Strainer - Y-pattern with flanges
Strainer - Screen and supporting basket made of stainless steel ARI-Strainer - Y-pattern with flanges TRB 801 Annex II No. 45 (except EN-JL1040) German TA - Luft TÜV-Test-No. 922-9204866 Grey cast iron
XFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump
XFLO P U M P S XS SERIES Single Stage Double Suction Split Casing Centrifugal Pump General and Construction 1. Applications Waterworks, Irrigation, Drainage pumping stations, Power stations, Industrial
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 601, and manually operated diaphragm valves have a temperature resistant plastic handwheel, 602 has a stainless steel handwheel. Bonnet and internals are made all
Concentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
Type 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
ARI-STEVI 470 / 471 (DN15-150)
With pneumatic and electric actuators ARI-STEVI 470 / 47 (DN5-50) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 47 Pneumatic actuator
Excess pressure regulator Excess pressure regulator, straight through DN
ARI-PREDEX Excess pressure regulator Excess pressure regulator, straight through DN 15-150 ARI-PREDEX Excess pressure regulator, straight through with diaphragm actuator UDA Actuator with rolling diaphragm
HELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
ARI-STEVI 470 / 471 (DN15-150)
With pneumatic and electric actuators ARI-STEVI 470 / 471 (DN15-150) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 471 Pneumatic
ARI-Check valve. ARI-Check valve, metallic sealing. ARI-Check valve - Straight through with flanges. ARI-Check valve - Straight through with flanges
ARI-Check valve, metallic sealing Straight through with flanges (except EN-JL1040) Grey cast iron SG iron Cast steel Fig. 003/303 Page 2 Straight through with flanges Straight through with flanges Angle
BR 11e Centric Control and Shut-off Butterfly Valve
BR 11e Centric Control and Shut-off Butterfly Valve Application: Tight-closing, centric control and shut-off butterfl y control valve with EPDM lining. Suitable for solids, liquids and gases: Valve sizes
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.
The ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications.
Butterfly Valve ParaSeal range The ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications. Features The field replaceable seat fully
2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel valve body Compact industrial design with long service life /2702 can be combined
Declaration of Conformity as per Directive 97/23/EC
Declaration of Conformity as per Directive 97/23/EC The manufacturer declares that:, 47906 Kempen, Germany PTFE-lined Rotary plug valves Series 23e, with packing with lever for 90 operation with worm gear
Drain ball valve BR 21a
PTFE - lined Drain ball valve BR 21a Application: Tight-closing PTFE-lined drain ball valve for corrosive media, especially for high process demand in chemical plants: Nominal sizes DN 50 to DN 150 Nominal
ARI-STEVI 423 / 463 (DN ) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators ARI-STEVI 423 / 463 (DN200-300) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP
INSTALLATION & MAINTENANCE MANUAL
INSTALLATION & MAINTENANCE MANUAL 3-WAY/4-WAY/5-WAY MULTI-PORT BALL VALVES T TEFLON PARTS - 1. Seat x 5 pcs. 2. Joint Gasket x 5 pcs. 3. Retainer Seal x 5 pcs. 4. Thrust Washer x 1 pc. 5. O-Ring x 1 pc
LATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
Grooved Butterfly Valves
Grooved Butterfly Valves Design Rating: PN10, PN16 Design: UNE EN 539 Grooving dimensions: ANSI/ AWWA C 606 97 Face to face: MSS SP 67 Piping assembling: ANSI B3610, ISO 4200, DIN 2448, BS 1387, BS 3600
Type Pressure Transmitter with display. Pressure Transmitter. Technical data. DN15-50 Body material. Stainless steel 316L Actuator material
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life Excellent
ARI-STEVI 448 / 449 (DN15-100) Control valve in straightway form with screwed seat ring With pneumatic and electric actuators
ARI-STEVI 8 / 9 (DN5-00) Control valve in straightway form with screwed seat ring With pneumatic and electric actuators ARI-STEVI 8 / 9 Pneumatic actuator ARI-DP 30-3 Reversible pneumatic actuator Actuator
VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
BR 20b Ball valve. PFA-lined. Application: Versions:
PFA-lined BR 20b Ball valve Application: Tight-closing PFA-lined ball valve for (highly) corrosive media, especially with high process demands in chemical plants: Nominal sizes DN 25 to DN 200 Nominal
Series 14b - Type HD
High-Performance Control and Shut-off Butterfly Valve Series 14b - Type HD Application: Tight-closing, double-eccentric butterfl y valve especially for high requirements in the chemical industry, for example
Type 427, 429. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 427, 429 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.05-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
Wafer Check Valve Type 012 PVC-U
novel valve design with conical sealing surface for highest requirements and long service life body disc reinforced EPDM / FPM gaskets DN40 / d50 / 1½'' DN200 / d225 / 8'' operating pressure max. 10 bar
ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP 34-34T. Electric actuator ARI-PREMIO 5-25 kn ARI-PREMIO-Plus 2G 5-25 kn
Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP 34-34T Reversible pneumatic actuator
Neotecha NTB - NTC PFA lined ball valves
These PFA lined ball valves are used in a wide variety of applications in many industries Features General application The valves are ideally suited for corrosive applications, requiring reliable performance,
Pneumatic Butterfly Valve Type 3335 / AT
Pneumatic Butterfly Valve Type 3335 / AT Application Tight closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN 10 and PN
METSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW
METSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW Neles BW series metal seated high performance butterfly valve with one piece body design, for both control and tight shut-off applications. Multiple
PRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3
BUTTERFLY VALVES PRZEPUSTNICE TYPE DESCRIPTION NOMINAL PRESSURE TEMPERATURE DIAMETER STANDARD PAGE B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 B-099 Centric butterfly valve
brands you trust. XLD - Lined Butterfly Valve Series Copyright 2013 CRANE ChemPharma & Energy
brands you trust. XLD - Lined Butterfly Valve Series Copyright 2013 CRANE ChemPharma & Energy PERFORMANCE We listened to our most demanding critics: Our customers. Here s our response. ANSI Class 150/PN10
Solutions For The Oil & Gas
Bolted Bonnet Gate & Globe Crane Globe & Gate Valves are used on almost all refinery units and are available in different material options of cast steel. Gate, globe, check, globe stop-check valves are
ARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing
ARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing Straight through with flanges (except EN-JL1040) Straight through with flanges Straight through with flanges Angle pattern with flanges
For ball valves
Soft seal Ball valve Float ball valve Flange PN16-40 DN15-200 For 1.4408 ball valves Range of application: In industrial facilities, oil and chemical industry and related manufacturing industries Temperature
ARI-STEVI 470 / ANSI (DN25-200)
With pneumatic and electric actuators Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 471 - ANSI Pneumatic actuator ARI-DP 32-35 Reversible
ARMATUREN TYPE ISO-STANDARD A. Plug valve with chemical-resistant vacuum-proof lining DN / PN NPS ½ - 12 / class
TYPE ISO-STNDRD Plug valve with chemical-resistant vacuum-proof lining DN 15-300 / PN 10-40 NPS ½ - 12 / class 150-300 RMTUREN free of cavity & maintenance 2.1 free of cavities Maintenance free and self
2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can
BrewSeal butterfly valves Wafer and lugged
Wafer and lugged KEYSTONE Resilient seated butterfly valves DN40-DN800 wafer and lugged versions, optimized for the food and beverage industry. Features Top bushing absorbs actuator side thrust loads.
HYDRAULIC CONTROL VALVES
HYDRAULIC CONTROL VALVES The automatic control valves are diaphragm valves designed to provide hydraulically driven solutions to pressure, flow and level control applications. Features: Main valve uses
16 bar standard 25 bar - option Tightness class ISO 5208, EN Standard - RATE B, Option RATE A RATE A. 16 bar standard 25 bar - option
Operation WAFER TYPE stainless steel C ont R o L Description Edition Wafer type butterfly valve is an on-off and control valve for demanding industrial pipelines. The valve is tight to both directions
Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a
Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a Application Tight-closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN
NAF-Triball ball valve
NAF-Triball ball valve DN 10-100 for max. 40bar Fk 25.622(12)GB 12.09 Primary characteristics NAF-Triball is a full bore ball valve designed for shut-off, on-off functions as well as control application
ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP 34-34T. Electric actuator ARI-PREMIO 5-25 kn ARI-PREMIO-Plus 2G 5-25 kn
ARI-STEVI 423 / 463 (DN200-300) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP
Bearings. Shaft seal. Materials
Type series booklet 1385.51/3--10 RDL Axially split volute casing pumps Applications Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems, fire fighting
ARI-Strainer PN63-160
ARI-Strainer PN63-160 ARI-Strainer - Screen of stainless steel DN 10-100 ARI-Strainer - Straight through with flanges TRB 801 Annex II No. 45 Cast steel Forged steel High temp. Steel Fig. 050 Page 2 +
NORI 320 Globe valves PN DN Application Standard variants Operating data Materials Remarks Design
Type series booklet 7653.1/8-10 NORI 320 Globe valves with gland packing with non-turning stem flanged or butt-weld ends ZXLF ZXSF PN 250-320 DN 65-200 Application In industrial plants, power stations,
BUTTERFLY VALVE WAFER TYPE of carbon steel ( ) series
Operation WAFER TYPE of carbon steel 1100 (1000-100) series C ont R o L Operation Edition 0-0-009 Wafer type butterfly valve 1100 (1000 100) series is used in industrial pipelines for demanding on-off
Lined Butterfly Valve Pfeiffer Type BR 10a
Lined Butterfly Valve Pfeiffer Type BR 10a Application Tight closing, double eccentric butterfly valve with PTFE lining for process engineering and plants with industrial requirements, especially suitable
These installation and maintenance instructions must be read in full and completely understood before the installation!
NEOTECHA These installation and maintenance instructions must be read in full and completely understood before the installation! 1. General information on the installation and maintenance instructions
Long Face to Face. Bonded Liner Butterfly Valve Mono Flanged Type (Long) Series 130. Document : S130 Revision : 3 Year : 2014
Year : Long Face to Face Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Technical Data Description