SENSORS AND SYSTEMS FOR HUMIDITY AND TEMPERATURE MEASUREMENTS RELIABILITY REPORT. HS1100 / HS1101 Relative Humidity Capacitive Sensors
|
|
- Prudence Jordan
- 5 years ago
- Views:
Transcription
1 SENSORS AND SYSTEMS FOR HUMIDITY AND TEMPERATURE MEASUREMENTS RELIABILITY REPORT HS1100 / HS1101 Relative Humidity Capacitive Sensors Summary of the sensors resistance against various physical and chemical stresses. Date / Date : 31 st May 2000 Par / By : Sensors Laboratory HFE074 VO MN RevA 1
2 OBJECTIVES : HS1100 / HS1101 sensors are tested against different physical and chemical parameters. This test report is a summary. Individual reports, with measurement data are available on request. EQUIPMENT / PROCESS : Equipment used are chemical & reliability laboratory test fixtures commonly available. Relative Humidity measurements are referred to a VAISALA transmitter under metrology control. Measurement Accuracy in Relative Humidity is +/- 2% RH. Reference humidity level is generated through saturated salt RH. FAILURE / REJECT / OK / NO REJECT CRITERIA - HS1100 / HS1101 sensors are all supplied with a nominal capacitance of 180 pf +/- 3 pf at 55% RH / 23 C. - Are considered as FAILURE all devices which can not operate anymore after the test, such as open circuit, short circuit or nominal capacitance variations higher than 5pF at 55% RH / 23 C. - Are considered as FUNCTIONAL REJECT all devices which present a change of their nominal capacitance value within +/- 3 to 5 pf at 55%RH / 23 C. - Are considered as OK all devices which present a change of their nominal capacitance value lower than +/- 3pF at 55% RH / 23 C. - Are considered as NO EFFECT all devices which present a change of their nominal capacitance value lower than +/- 1 pf at 55% RH / 23 C (measurement uncertainty). HFE074 VO MN RevA 2
3 PHYSICAL STRESS INFLUENCE HS1100/HS1101 RELATIVE HUMIDITY SENSORS TEST DESCRIPTION SAMPLE SIZE RESULTS AUTOMATIC WAVE SOLDERING AND CLEANING MECHANICAL SHOCKS VIBRATION THERMAL SHOCKS Wave temp. : 250 C Board Temp. : 105 C 1500 G / 5 shocks / 3 ways Method MilStd 750 Variable Freq Hz Fix Freq. 35 Hz Method JESD22-B103A -30 C / 1 hr / 85 C / 1 hr transition of 30 seconds 100 cycles 2 X 20 No effect CONSTANT ACCELERATION E.S.D MilStd 750 / Method 2006 Human body model at 2000V Machine Model Method JESD22-A114A /A115A 5 5 No effect VOLTAGE SUPPLY From 1 to 15 Volts DC for 1 hour 10 No effect HFE074 VO MN RevA 3
4 CHEMICAL STRESS INFLUENCE HS1100/HS1101 RELATIVE HUMIDITY SENSORS TEST DESCRIPTION SAMPLE SIZE / DURATION RESULTS SALT ATMOSPHERE MilStd 750 / Method 1041for 48 and 96 hours, 5 % salty 5 / 48 hours 5 / 96 hours No effect OK CORROSION TEST UL217 62, CO 2 1 % / SO % CORROSION TEST UL217 62, H 2 S 0.1 % 24 / 240 hours No effect 24 / 240 hours No effect CIGARETTE SMOKE Smoke of 10 cigarettes in one liter container 5 / 24 hours OK CIGARETTE TAR Liquid tar from pipe smoker coated on the sensitive layer 5 / 24 hours No effect OIL MIST Condensation of oil mist ( 5 times ) 5 / 120 hours No effect COOKING OIL METHANOL ETHANOL TOLUENE THINNER BLEACH ACETIC ACID The surface of the sensitive layer is coated with cooking oil 5 / 24 hours No effect 85,000 ppm atmosphere of CH 4 O 5 / 500 hours OK 40,000 ppm atmosphere of C 2 H 5 O 5 / 500 hours OK 35,000 ppm atmosphere of C 7 H 8 5 / 760 hours No effect 10 % (estimated) atmosphere of White Spirit 5 / 1000 hours OK atmosphere of domestic bleach 5 / 1000 hours OK The sensors are stored in a 20,000 ppm atmosphere of C 2 H 4 O 5 / 1000 hours OK HFE074 VO MN RevA 4
5 CHEMICAL STRESS INFLUENCE HS1100 / HS1101 HUMIDITY SENSORS (Cont 2) TEST DESCRIPTION SAMPLE SIZE / DURATION RESULTS HAIR SHAMPOO HAIR RINSE HAIR DYE MOSQUITO COIL INSECTICIDE COKE SOFT DRINK SOFTENER SOAP DOMESTIC AMMONIA OZONE atmosphere of standard shampoo 5 / 24 hours No effect atmosphere of Japanese hair rinse 5 / 24 hours No effect atmosphere of Hair dye mixture 5 / 24 hours No effect The sensors are stored in the smoke generated by a camping mosquito coil 5 / 24 hours No effect atmosphere of anti-spider insecticide 5 / 200 hours OK The sensors are immersed in Coke based soft drink 5 / 4 hours No effect standard cloth liquid softener, then washed 20 / 3 hours No effect standard cloth liquid soap, then washed 20 / 3 hours No effect standard domestic ammonia, then washed 20 / 3 hours No effect The sensors are exposed to 1.5ppm Ozone (O 3 ) concentration 9 / 168 hours No effect NITROGEN OXIDE The sensors are exposed to 15 ppm Nitrogen Oxide (NO) concentration 9 / 120 hours No effect HMDS NITRIC, SULFURIC AND CHLORHYDRIC ACIDS LACTIC ACID The sensor sensitive layer is coated with HMDS 20 / 500 hours No effect The sensors are exposed to 75,000 ppm of a mixture of these 3 acids (HCl, H 2 SO 4, HNO 3 ). 7 / 1 hour OK The sensors are exposed to 50,000ppm of Lactic Acid (C 3 H 6 O 3 ) 1 / 72 hours OK CHLORINATED SOLVENTS The sensors are exposed to a saturated atmosphere of Dichloromethane (CH 2 Cl 2 ) and Trichloroethane111 (C 2 H 3 Cl 3 ) 1 / 1 hour OK SEA WATER The sensors are immersed in sea water 1 / 720 hours OK HFE074 VO MN RevA 5
HM1520LF Relative Humidity Module
Tubular form for through wall mounting Product free from Lead, Cr(6+), Cd and Hg Calibrated, linear voltage for easy electronic interface Typical 1 to 1.6 Volt DC output for 0 to 20% RH at 5Vdc supply
More informationVIA Platform Environmental Qualification Testing Standards
VIA Platform Environmental Qualification Testing Standards Revision: 1 Report Dated: September 7 th 2016 Report Prepared By: Noel Joyce Reliability Lab Manager Page 1 of 16 Table of Contents 1. Purpose...
More informationPTC Thermistor for Automotive:TPM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics Part Number Code
More informationPTC Thermistor for Automotive:TPM-C Series
SMD PTC Thermistor for Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics
More informationThe MiCS-2714 is a compact MOS sensor.
Rs/R0 Data Sheet The is a compact MOS sensor. The is a robust MEMS sensor for nitrogen dioxide and leakage detection. Features Smallest footprint for compact designs (5 x 7 x 1.55 mm) Robust MEMS sensor
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
More informationNTC Thermistor for Automotive: TSM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. Operating temperature range: -50 ~ +150 3. Superior stability in high-temperature and high-humidity environment 4. RoHS & Halogen Free (HF) compliant
More informationRefer to CATALOG NUMBERS AND RATING. Fusing within 1 min if the current is 200% of rated current. K A B N A
TYPE KAB (P-KAB-E004) Type KAB micro fuse is designed for circuit protection against excessive current in portable electronic equipment, electronic circuit around battery, etc. because the demand for high
More informationNo. P-KAB-001 DATE PRODUCTS DATA SHEET MICRO FUSE. Type KAB. UL/cUL approved File No.E17021 RoHS COMPLIANT LEAD FREE
No. P-KAB-00 DATE 007-0 PRODUCTS DATA SHEET UL/cUL approved File No.E70 RoHS COMPLIANT MICRO FUSE Type KAB LEAD FREE Size 608/0 Type KAB micro fuse is designed for circuit protection against excessive
More informationRefer to CATALOG NUMBERS AND RATING. Fusing within 1 min if the current is 200% of rated current. K A B N A
TYPE KAB Type KAB micro fuse is designed for circuit protection against excessive current in portable electronic equipment, electronic circuit around battery, etc. because the demand for high capacity
More informationWall-Mount Thermohygrometers
OPERATING INSTRUCTIONS OAKTON 35700-00, -10, -20 and 03313-70 Wall-Mount Thermohygrometers 00703-05 Printed in the U.S.A. 12/99 Table of Contents 1. Introduction...3 2. Installation...4-5 3. Operation...6-7
More informationPressure Sensor/PS-A (ADP5)
Sensor PS-A sensor Built-in amplifi er and compensating circuit Features Built-in amplifier and temperature compensation circuit, no need for circuit design and characteristic adjustment High accuracy
More informationReliability Test Report
Reliability Test Report Page 1 of 29 Reliability flow Chart: Page 2 of 29 Test Group 1 1.1 Dimensional Analysis: 1.1.1 Test Purpose: These measurements are to verify that the units meet the dimensional
More informationContent (RF Inductors) Multi-Layer High Frequency Inductors (IQ & HI Series) Cautions... 18
Content (RF Inductors) Multi-Layer High Inductors (IQ & HI Series)... 2 Ordering Code... 2 Standard External Dimensions... 3 High Q Type (IQ Series)... 4 Standard Type (HI Series)... 5 Testing Condition
More informationMultilayer Chip Inductor-CL Series
Multilayer Chip Inductor-CL Series Construction A L 5 4 T 1 3 2 W 1 Ceramic Material 3 Inner Electrode (Ag) 5 Direction Mark 2 Through Hole 4 End-termination (Ag/Ni/Sn) Features -A ceramic material construction
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
More informationRotary Position Sensors
RE.pdf Rotary Position Sensors SMD/Lead Dust-proof Type 12mm Size SV01 Series Features 1. Dust-proof construction protects the interior from dust, which maintains stable characteristics. 2. Compliant to
More informationReliability Report Reliability Data for CPC10XXN-4 Pin SOP Product (Low Voltage 60v 150v)
Reliability Report Reliability Data for CPC10XXN-4 Pin SOP Product (Low Voltage 60v 150v) Report Title: Reliability Data for CPC10XXN-4 Pin SOP Product (Low Voltage 60v 150v) Report Number: 2010-004 Date:
More informationCONTENT (MLCC) E STANDARD NUMBER... 3 STRUCTURE... 4 ORDERING CODE... 4 AUTOMOTIVE APPLICATION (AEC-Q200 COMPLIANT)... 5
CONTENT (MLCC) E STANDARD NUMBER... 3 STRUCTURE... 4 ORDERING CODE... 4 AUTOMOTIVE APPLICATION (AEC-Q200 COMPLIANT)... 5 NP0 Series... 6 X7R Series... 10 TEST SPEC.... 16 MLCC PACKAGE... 20 OTHERS... 24
More informationReliability Report Reliability Data for CPC5001G
Reliability Report Reliability Data for CPC5001G Report Title: Reliability Data for CPC5001G Report Number: 2012-010 : 7/20/12 Page 1 of 6 Introduction: This report summarizes the Reliability data of IXYS
More informationMetallic Systems TYPE SPTC
CONDUIT 27/01/2009 Technical Data Sheet Page No. 1 Applications Hospitals External Safety Critical Area Fittings IP54 SPB Fittings type A & B Characteristics Very High UV Resistance High Flexibility Medium
More informationSPECIFICATION SHEET. ±1%, ±5%, Convex Type General purpose chip resistors array
SPECIFICATION SHEET CNA24, CNA34 ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) ( Automotive & Anti-sulfur ) All data in this sheet are subject to change, modify
More informationSpecification Status: Released
PAGE NO.: 1 of 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against
More informationOrdering Information. MEMS Gauge Pressure Sensor 2SMPP. MEMS Gauge Pressure Sensor Featuring Small Size and Low Power Consumption
MEMS Gauge Pressure Sensor 2SMPP MEMS Gauge Pressure Sensor Featuring Small Size and Low Power Consumption Ultra-miniature 6.1 4.7 8.2 mm (L W H). Piezo Resistive element provides electrical characteristics
More informationSpecification Status: Released
PAGE NO.: 1 OF 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against
More informationPRODUCT SPECIFICATION
ML-XT COMMERCIAL VEHICLE CONNECTOR SERIES 1.0 SCOPE This Product Specification relates to the ML-XT Commercial Vehicle, (CV), Power and/or Signal wire-to-wire connector system. This system consists of
More informationPower Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) ORDERING CODE... 1 Standard External Dimensions... 2 Power Inductor for Choke (L Type)... 3 Power Inductor for DC/DC converter (S Type)... 4 Testing Condition &
More informationReference Only. *B: Bulk packing also available. Inductance. Tolerance M:±20% N:±30% 0.150±25% 1.0 * * N:±30% 0.23±25% 0.8 *2 0.
CHIP COIL (CHIP INDUCTORS) LQM21PN GRD REFERENCE SPECIFICATION P.1/9 1. Scope This reference specification applies to LQM21PN_GR series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 21 P N 1R
More informationLow TCR, 1mW Dual Rejustor Micro-Resistor MBD-472-AL
Low TCR, 1mW Dual Rejustor Micro-Resistor MBD-472-AL The Rejustor is a precision, electrically-adjustable resistor from Microbridge. The Rejustor can be adjusted to a precision of 0.1%, or better. The
More informationPRODUCT RELIABILITY REPORT
PRODUCT RELIABILITY REPORT Product: MPQ2013A-AEC1 Reliability Department Monolithic Power Systems 79 Great Oaks Boulevard San Jose, CA 95119 Tel: 408-826-0600 Fax: 408-826-0601 1 1. Device Information
More informationNFC. (Varistor Type NFC)
NFC (Varistor Type NFC) Type NFC Varistors are made of semiconductor ceramic materials composed mainly of zinc oxide. They have nonlinear resistance that changes as a function of applied voltage. It has
More informationType 4 Vertical Kink Short Lead. Double Outside Kink Lead (Gz Use) Type 6 Double Outside Kink Lead (Ks Use)
8.Kinked Lead Type Disc Size And Lead Style (Unit Mm) Lead Type Lead Code Lead Configuration Lead Type Lead Code Lead Style B Lead Configuration Lead Style D Type 1 Straight Lead B Type 4 Vertical Kink
More informationDucting & Ventilation Components
Ducting & Ventilation Components 111 Powell Road Independence, MO 64056 visit www.hemcocorp.com Phone: 816-796-2900 Fax : 816-796-3333 E-Mail : info@hemcocorp.com Exhaust Blowers are constructed of chemical
More informationMulti-Layer Power Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) For DC/DC Converter Application ORDERING CODE IP R M P S 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA. x. mm. X.
More informationReliability Report Reliability Data for IX9908
Reliability Report Reliability Data for Report Title: Reliability Data for Report : 2013-009 : 6/26/13 Page 1 of 5 Introduction: This report summarizes the Reliability data of IXYS Integrated Circuits
More informationLife Extension Testing of Electrical Penetration Assemblies
Nuclear Division Life Extension Testing of Electrical Penetration Assemblies EQ Conference Oct 31 Nov 2, 2018 Steve Benesh, Curtiss-Wright Nuclear 1 October 22, 2018 Curtiss-Wright Summary Life Extension
More informationan ISO9001 company The Figaro TGS4161 is a new solid electrolyte type sensor which offers miniaturization, low power consumption,
an ISO91 company Technical Information for Carbon Dioxide Sensors The Figaro TGS4161 is a new solid electrolyte type sensor which offers miniaturization, low power consumption, and long life. The TGS4161
More informationSMT Shielded Power Inductors IDM6025, IDM6028, IDM6045, IDM7032, IDM7045, IDM7055, IDM10145, IDM12555, IDM12565, IDM12575, IDM6028.
SMT Shielded Power s IDM6025, IDM6028, IDM6045, IDM7032, IDM7045, IDM7055, IDM10145, IDM12555, IDM12565, IDM12575, IDM6028 Configurations: FEATURES Magnetically shielded construction. Compact and thin.
More informationEmergency lighting units EM LED Light Engines. Module EM-ES 08/10/12 Mk2 EM LED linear / area
X1 X1 DC1 DC1 D81 D82 D83 D84 D85 D86 DC2 AK AK AK D121 D101 D81 D122 D102 D123 D82 D103 D124 D83 D125 D126 D84 D127 D106 D85 D128 D107 D129 D86 D108 D1210 DC2 AK AK AK D104 D105 Emergency lighting units
More informationan ISO9001/14001 company
an ISO91/11 company Technical Information for Carbon Dioxide Sensors The Figaro TGS4161 is a new solid electrolyte type sensor which offers miniaturization, low power consumption, and long life. The TGS4161
More informationMA04X, MA06X ±1%, ±5%, Convex Type General purpose chip resistors array
MA04X, MA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) ( Automotive & Anti-sulfur ) Page 1 of 8 MA04/ 06_V03 Apr.2010 FEATURE 1. High reliability and stability
More informationCRS-A Series High Power Anti-Surge Resistor
*RoHS COMPLIANT, **HALOGEN FREE & AEC-Q200 COMPLIANT Features Thick film technology Power rating up to 2 watts at 70 C High power surge withstanding Sulfur-resistant design (ASTM B-809) RoHS compliant*
More informationOrdering Information. MEMS Gauge Pressure Sensor 2SMPP. MEMS Gauge Pressure Sensor Featuring Small Size and Low Power Consumption
MEMS Gauge Pressure Sensor 2SMPP MEMS Gauge Pressure Sensor Featuring Small Size and Low Power Consumption Ultra-miniature 6.1 4.7 8.2 mm (L W H). Piezo Resistive element provides electrical characteristics
More informationSY-HS-25NT Humidity Sensor Module.
SY-HS-25NT Humidity Sensor Module. Features High Reliability & Excellent Life span Outstanding Durability Wide Operating Temp. Range Interchangeability Availability of Customized products Description A
More informationSize 1206, 1210, 0805, 0603, 0402 (Anti-Sulfuration )
SR12, SR10, SR08, SR06, SR04, General purpose chip resistors Size 1206, 1210, 0805, 0603, 0402 (Anti-Sulfuration ) *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_SR_V03
More informationManual Supplement. This supplement contains information necessary to ensure the accuracy of the above manual.
Manual Supplement Manual Title: 975 Users Supplement Issue: 7 Part Number: 2507213 Issue Date: 10/11 Print Date: August 2006 Page Count: 7 Revision/Date: This supplement contains information necessary
More informationFurnaceDoctor -DPT Dewpoint Analyzer. User Manual Version 008
FurnaceDoctor -DPT Dewpoint Analyzer User Manual Version 008 Manual FurnaceDoctor -DPT - Version 8 Page 2 of 13 Manual #: 003 Rev No: 8 COPYRIGHT (C) No part of this publication may be reproduced, transmitted,
More information产品技术规范. Product Name: Product Technical Specification SMARTSTONE. No.: CPFL0002 Version: A Issued date: Page 1 of 16
Product Name: TMAP Part Number: CPF00002 Drawing Number: CPFJ0002 Page 1 of 16 CONTENTS 1. General Data 1.1. Description 1.2. Installation Guide 1.3. Maximum ratings of pressure sensor 1.4. Operating characteristics
More informationReference Only. 1. Scope This reference specification applies to LQM2MPN_G0L series, Chip Coil (Chip Inductors).
Spec No. JELF243B-22L-1 P1/9 CHIP COIL (CHIP INDUCTORS) LQM2MPN GL REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2MPN_GL series, Chip Coil (Chip Inductors). 2. Part Numbering
More informationNotice for TAIYO YUDEN Products
Notice for TAIYO YUDEN Products [ For the TAIYO YUDEN Products excluding Ceramic Capacitors and Inductors ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information
More informationApproval Sheet for. Lithium and Iron Disulfide Battery. Model: LFB-AAA
Approval Sheet for Lithium and Iron Disulfide Battery Model: LFB-AAA AA Portable Power Corp (http://www.batteryspace.com) Address: 2700 Rydin Road, Unit C, Richmond, CA, 94804 Tel: 510-525-2328, Fax: 510-439-2808
More informationMEMS Gauge Pressure Sensor
MEMS Gauge Pressure Sensor MEMS Gauge Pressure Senser Featuring Small Size and Low Power Consumption Ultra-miniature 6.1 4.7 8.2 mm (L W H). Superior electrical characteristics to capative type pressure
More informationA and B Series Sensors for Humidity and Temperature for industrial applications from C and up to 25 bar
Galltec Mess- und Regeltechnik GmbH MELA Sensortechnik GmbH Sensors for Humidity and Temperature for industrial applications from -80...00 C and up to 5 bar AK... with SVKA.0E... duct version up to 150
More informationPRODUCT SPECIFICATION
1.0mm Pitch ZIF FPC Page 1 Top Entry Side Entry 1.0mm Pitch ZIF FPC Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for 1.0mm Pitch ZIF FPC Connector 2.0 APPLICABLE
More informationHUMIDITY SENSOR KSH-01BJL
HUMIDITY SENSOR KSH-01BJL Our Humidity Sensor KSH-01BJL is a high quality, highly responsive polymer film humidity sensor. At ambient temperature the sensor resistance drops from 30%RH to 90%RH in approximately
More informationWW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive)
WW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive) *Contents in this sheet are subject to change without prior notice. Page
More informationSPECIFICATION FOR ALUMINUM ELECTROLYTIC CAPACITOR
2016.4.29 SPECIFICATION FOR ALUMINUM ELECTROLYTIC CAPACITOR 1. PRODUCT 2. Part Number 3.CUSTOMER ST/SI TYPE ALUMINUM ELECTOLYTIC CAPACITOR UWP2G151KR035K (400v 150uF 30*35mm 105C 2000H) GD Rectifiers.
More informationReference Only. Inductance Frequency (μh) Tolerance Typ Max (MHz min.) 85 *
P.1/10 CHIP COIL (CHIP INDUCTORS) LQM2HPN G0L REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2HPN_G0 series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 2H P N
More informationPrecautions on the use of Multilayer Ceramic Capacitors
on the use of Multilayer Ceramic Capacitors PRECAUTIONS 1. Circuit Design Verification of operating environment, electrical rating and performance 1. A malfunction of equipment in fields such as medical,
More informationNotice for TAIYO YUDEN Products
Notice for TAIYO YUDEN Products [ For General Electronic Equipment (General Environment) ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is
More informationmeasuring vessel air inlet conductivity cell reaction vessel sample absorption solution (water) heating block (e.g. 120 C)
Rancimat Practice Principle of Rancimat method air inlet measuring vessel reaction vessel conductivity cell sample heating block (e.g. 120 C) absorption solution (water) Preparing a determination reaction
More informationALUMINUM ELECTROLYTIC CAPACITORS
CAUTION FOR PROPER USE OF ALUMINUM ELECTROLYTIC CAPACITORS I Upon using Aluminum Electrolytic Capacitors, please pay attention to the points listed below. When the following types of electrical loads indicated
More informationPRODUCT SPECIFICATION
1. SCOPE This specification covers the T-FLASH MEMORYCARD SOCKET series. 2. PRODUCT NAME AND PART NUMBER Product Name Part Number Assembly 49225-811 Embossed Package 49225-811 3. RATINGS Item Standard
More informationHUMIDITY SENSOR KSH-02BJS
HUMIDITY SENSOR KSH-02BJS Our Humidity Sensor KSH-02BJS is a high quality, highly responsive polymer film humidity sensor. At ambient temperature the sensor resistance drops from 30%RH to 90%RH in approximately
More informationP17 combined units LIMOGES Cedex Telephone : Fax : Cat. No.(s) : 566 XX XX XX XX
8704 LIMOGES Cedex Telephone : + 33 0 06 87 87 - Fax : + 33 0 06 88 88 P17 combined units Cat. No.(s) : 66 XX - 72 XX - 77 XX - 89 XX CONTENTS Page 1. Description...1 2. Use...1 3. Range.......................
More informationRoHS. Specification. Acrich2 Bulb 120V 4.3W SMJE-2V04W1P3. Drawn Approval Approval. Rev. 01 June
Specification RoHS Acrich2 Bulb 120V 4.3W SMJE-2V04W1P3 SSC Customer Drawn Approval Approval 1 Acrich2-120V 4.3W Bulb Description The Acrich 2 series, which are designed for AC drive(or operation), do
More informationWA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) (Automotive ) Page 1 of 8 ASC_WAxxX_J_V05 May.2011 FEATURE 1. Small size and light weight 2. Reduced size
More informationWireless Digital Compass
The Leader in Low-Cost, Remote Monitoring Solutions Wireless Digital Compass General Description The wireless compass sensor uses a highly sensitive 3 axis digital compass to return the orientation of
More information973 Dew Point Mirror. Portable Industrial Chilled Mirror Hygrometer. Typical applications: REFLECTING YOUR STANDARDS
Portable Industrial Chilled Mirror Hygrometer Fundamental drift free humidity measurement Integral frost/dew point measuring head Internal sample pump Optimal Response Injection System for fast measurement
More informationDräger CMS. Dräger CMS: Highly accurate and easy to use. Dräger CMS Chip: Miniaturised Dräger-Tubes.
DETECTION PERSONAL PROTECTION DIVING TECHNOLOGY SYSTEM TECHNOLOGY SERVICES Dräger CMS The world's only Chip Measurement System (CMS) makes spot measurements as easy as 1, 2, 3: insert chip start measurement
More informationCyclic Corrosion Chamber C.C.T AUTO Series
Cyclic Corrosion Chamber C.C.T AUTO Series CCT 5000 AUTO image merely illustrative Cooling system image merely illustrative Specifications/ Models CCT 1300 AUTO CCT 3000 AUTO CCT 5000 AUTO Allows 7 different
More informationHigh Temperature Marker Tag
Tinley Park, IL 0487 High Temperature Marker Tag This specification is intended to outline the physical and chemical properties of PANDUIT s material for identification purposes. Printable Material Suffixes
More informationDräger CMS Chip Measurement System
Dräger CMS Chip Measurement System The world s only Chip Measurement System (CMS) makes spot measurements as easy as 1, 2, 3: insert chip start measurement read measurement result on the LCD display. The
More informationFlammable Gas Sensor. (Model:MQ-4) Manual. Version: 1.4. Valid from: Zhengzhou Winsen Electronics Technology Co., Ltd
Flammable Gas Sensor (Model:MQ-4) Manual Version: 1.4 Valid from: 2015-03-10 Zhengzhou Winsen Electronics Technology Co., Ltd Statement This manual copyright belongs to Zhengzhou Winsen Electronics Technology
More informationRoHS. Specification. Acrich2 Bulb 120V 8.7W SMJE-2V08W1P3. Drawn Approval Approval. Rev. 01 June
Specification RoHS Acrich2 Bulb 120V 8.7W SMJE-2V08W1P3 SSC Customer Drawn Approval Approval 1 Acrich2-120V 8.7W Bulb Description Acrich 2 series designed for AC drive(or operation) doesn't need the converter
More informationKCA Series A-Type Breaker (Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE Features Formerly a product Miniature Thermal Cutoff (TCO) device High current type Optimal corrosion resistant properties Smaller body size: L5.4 x W3.2 x H0.89 mm Overtemperature
More informationNotice for TAIYO YUDEN products
Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2014. All of the contents specified herein
More informationA and B Series Sensors for Humidity and Temperature for industrial applications from C and up to 25 bar
Galltec Mess- und Regeltechnik GmbH MELA Sensortechnik GmbH D-71145 Bondorf. Germany D-07987 Mohlsdorf-Teichwolframsdorf. Germany Tel. +49 (0)7457-9453-0. Fax +49 (0)7457-3758 Tel. +49(0)3661-6704-0. Fax
More informationMM Series MLCC for Medical Applications
MM Series MLCC for Medical Applications General Specifications The AVX MM series is a multi-layer ceramic capacitor designed for use in medical applications other than implantable/life support. These components
More informationSA Series Breaker (Surface Mount Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE S A 0 0 77SB0 X 2 4 6 L Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n Surface mount n Overtemperature and overcurrent protection for lithium polymer
More informationP41 Power Bank datasheet. Power Bank Datasheet. Model Name: P41 (4400mAh)
Power Bank Datasheet Model Name: P41 (4400mAh) 1 Contents Power Bank Datasheet... 1 Product Specification... 3 Cell Specification... 4 PCM Specification... 4 Reliability test... 5 Security Testing Standard...
More informationPRODUCT SPECIFICATION
MICRO-FIT BMI FLOATING CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) connector system terminated with 20 to 30 AWG wire using crimp technology
More informationMetal Oxide Varistor Thermally Protected Type. TPV Series FEATURE PART NUMBERING SYSTEM LEAD CONFIGURATION SURGE CURRENT STANDARD WAVEFORM
FEATURE Operating Temperature: -55 C ~ +85 C Varistor : 200V ~ 1200V Two or Three terminal thermally protected Metal Oxide Varistor. High peak Surge current rating up to 10KA Standard lead form and spacing
More informationFeatures. Samples. Units Continous: Steady State Applied Voltage: DC Voltage Range (VM(DC)) 150 to 970 V AC Voltage Range (V M(AC)RMS
S 34S Varistor Series RoHS Description The Littelfuse S 34S thermally protected varistor is a self-protected device. It consists of a 34mm square varistor with an integral thermal designed to open in the
More informationProduct Specification Rev A
Product Specification 108-6116 1. Scope :.5 Signal DBL Lock Connector 18P 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - DO-214 E Description
SIDACtor Series - DO-214 RoHS Pb e3 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series
More informationCRC Report No. E-79 COORDINATING RESEARCH COUNCIL, INC MANSELL ROAD SUITE 140 ALPHARETTA, GA 30022
CRC Report No. E-79 SUMMARY OF THE STUDY OF E85 FUEL IN THE USA 2006 August 2006 COORDINATING RESEARCH COUNCIL, INC. 3650 MANSELL ROAD SUITE 140 ALPHARETTA, GA 30022 Summary of the Study of E85 Fuel in
More informationWireless Seat Occupancy Sensor
The Leader in Low-Cost, Remote Monitoring Solutions Wireless Seat Occupancy Sensor SEAT OCCUPANCY General Description The Wireless Seat Occupancy Sensor monitors for force or weight applied to a sensor
More informationRF Type 5 (04) Dimensions in mm (not to scale) Recommended Land Pattern in mm (not to scale) 0.2± ± ± ±0.05 Standard Packing uantit
Chip Inductors High Frequency Use (Non Magnetic Core) Type: ELJRF ELJRE Features High frequency capability due to its non magnetic core. Capable of being Re-fl ow or fl ow soldered. Unique Ceramic Core/Laser-cut
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com Report Title: Report Type: Date: Qualification Test Report See Attached
More informationA and B Series Sensors for Humidity and Temperature for industrial applications from C and up to 25 bar
Galltec Mess- und Regeltechnik GmbH MELA Sensortechnik GmbH D-71145 Bondorf. Germany D-07987 Mohlsdorf-Teichwolframsdorf. Germany Tel. +49 (0)7457-9453-0. Fax +49 (0)7457-3758 Tel. +49(0)3661-6704-0. Fax
More informationOrdering Information. General-purpose Basic Switch X. Direct Current Switch with Built-in Magnetic Blowout. Model Number Legend
General-purpose Basic Switch X Direct Current Switch with Built-in Magnetic Blowout Incorporates a small permanent magnet in the contact mechanism to deflect the arc to effectively extinguish it. Ideal
More informationCylinder Type Lithium Ion Capacitors LIC2540R3R8207
Powered by TCPDF (www.tcpdf.org) Spec Sheet Cylinder Type Lithium Ion Capacitors LIC2540R3R8207 ENERGY DEVICE (SUPER CAPACITORS) Features Item Summary 3.8(3.5)V, 2.2V, 200F±20%, Less than 0.05Ω Lifecycle
More informationCyclic Corrosion Test CORR Series
Cyclic Corrosion Test CORR Series CCT 1300 CORR image merely illustrative Specifications/Model CCT 1300 CORR CCT 3000 CORR CCT 5000 CORR - Mode: SALT SPRAY / SALT FOG - Mode: WATER CONDENSATION HUMIDITY
More informationPHASED OUT. LED light engine / OLED LED compact. Module STARK CLE , CLE CLASSIC Modules CLE
Product description The round shape downlight solution Designed for simple and cost-effective downlight fixtures No reflector or additional module housing required Efficacy of the module up to 139 lm/w
More informationSA Series Breaker (Surface Mount Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE S A 0 0 77SB0 X 2 4 6 L Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n Surface mount n Overtemperature and overcurrent protection for lithium polymer
More informationCONDUCTIVE POLYMER ALUMINUM SOLID CAPACITOR
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITOR 1 Application Guidelines 1. Polarity CSCAP is solid aluminum electrolytic capacitors with positive and negative electrodes. Do not reverse the polarity when
More informationProducts Tde Macno. User s Manual BRAKING UNIT. Cod. MP00401E00 V_1.0
Products Tde Macno User s Manual BRAKING UNIT Cod. MP00401E00 V_1.0 SUMMARY 1 GENERAL DESCRIPTION... 2 2 USE LIMITATIONS... 2 2.1 Climatic Class... 2 2.2 Resistance To Chemically Active Substances...
More informationConnected Home OTRX 2-way 1.2GHz Regal Tap
5-1218MHz Hum and noise tested to ANSI/SCTE 16 2001 RF and power bypass capability Compatible with existing Regal Taps Available in faceplate only replacements Overview The Technetix OTRX series of Regal
More informationSC Series Breaker (Surface Mount Thermal Cutoff Device)
00 SC 7 7 A 4134N Features n Miniature Thermal Cutoff (TCO) device n Surface mount, smallest body size n Overtemperature and overcurrent protection n Controls abnormal, excessive current virtually instantaneously,
More information