nash_elmo nash_elmo Liquid-Ring Vacuum Pumps
|
|
- Pamela Tyler
- 6 years ago
- Views:
Transcription
1 nash_elmo nash_elmo Liquid-Ring Vacuum Pumps Oil-Free, in Monoblock and Close-Coupled Design 2BV2 2BV5 2BV6 General nash_elmo 33mbarA(% ) 80mbarA 10mbarA, nash_elmo 2BV 2BV2 2BV5 2BV6 2BV2 2BV5 ( IP5)2BV6 nash_elmo vacuum pumps are suitable for evacuating gases and wet vapours down to inlet pressures of 33 mbara ( % vacuum ). All these vacuum pumps are supplied with built-in cavitation protection. For longterm operation below 80 mbara the cavitation protection should be connected for protecting the pump. An inlet pressure of 10 mbara can be achieved by connecting a gas ejector (see accessories). The gas ejector can be mounted directly onto the vacuum pump. The 2BV nash_elmo vacuum pumps consists of 2BV2,2BV5 and 2BV6 series. The 2BV2, 2BV5 series are especially space saving units in monoblock design (degree of protection IP5).The 2BV6 range is in closecoupled design with drive motor. Characteristic curves 600 m 3 /h Hz +361V mbarA, 10 33mbarA V +1V +311V +301V 71V+1V 71V 70V 61V 60V The characteristic curves are based on the evacuation of % saturated air with a temperature of 20. Discharge pressure is 1013 mbara, and the operating liquid is water with a temperature of, tolerance 10% V+0V The characteristic curves with inlet pressure below 33mbarA are achieved with the vacuum pump and connected gas ejector ( accessory). For the operating liquid flow, refer to page. 61V+1V V+0V P1 1
2 , 50Hz Selection and ordering data, 50 Hz 1 )ion 2 ) Curve Material of construction 1 ) Motor Rated Rated Rated Sound pressure Order No. Weight approx. No. Casing/port plate/impeller output kw voltage V current A Ievel 2 ) db(a) Kg nash_elmo 50Hz nash_elmo vacuum pumps in monoblock design, 50 Hz 60V /380Y 3.5 /2.0Y 62 2BV NC00-2P 33 Cast iron/bronze/bronze 61V /380Y 5.9 /3.Y 65 2BV NC02-2P 3 Cast iron/bronze/bronze 70V /380Y 8.7 /5.0Y 66 2BV NC00-2P 5 Cast iron/bronze/bronze 71V /.7Y 72 2BV NC03-7P 62 Cast iron/bronze/bronze 8.8 /5.1Y 63 2BV KC00-7P /7.6Y 68 2BV KC00-7P /9.0Y 69 2BV KC00-7P /13.0Y 73 2BV KC00-7P 31. /18.1Y 7 2BV KC02-7P 3 nash_elmo,50 Hz nash_elmo vacuum pumps in close-coupled design, 50 Hz 8.8 /5.1Y 63 2BV6110-0HC00-7P /7.6Y 68 2BV6111-0HC00-7P /9.0Y 69 2BV6121-0HC00-7P /13.0Y 73 2BV6131-0HC00-7P /18.1Y 7 2BV6161-0HC02-7P 39 nash_elmo, 50 Hz, Ex e II T3 nash_elmo vacuum pumps in close-coupled design, 50 Hz, Ex eii T3 8.8 /5.1Y 63 2BV HD00-7P 2BV KD00-7P /7.6Y 68 2BV HD00-7P 210 2BV6111-0KD00-7P 6 2
3 , 50Hz, Selection and and ordering data, Hz Hz 1 )ion 2 ) Curve No. Material of construction 1 ) Casing/port plate/impeller Motor Rated output kw Rated voltage V Rated current A Sound pressure Ievel 2 ) db(a) nash_elmo, 50 Hz, Ex e II T3 nash_elmo vacuum pumps in close-coupled design, 50 Hz, Ex e II T /13.0Y 73 Order No. 2BV HD00-7P 2BV KD00-7P Weight approx. Kg /18.1Y 7 2BV HD02-7P 75 2BV KD02-7P nash_elmo, 50 Hz, Ex d I or Ex d II T nash_elmo vacuum pumps in close-coupled design, 50 Hz, Ex d I or Ex d II T 8.8 /5.1Y 63 2BV HE00-7P 2BV KE00-7P /7.6Y 68 2BV HE00-7P 210 2BV KE00-7P /9.0Y 69 2BV HE00-7P 235 2BV KE00-7P /13.0Y 73 2BV HE00-7P 8 2BV KE00-7P /18.1Y 7 2BV HE02-7P 75 2BV KE02-7P 2BV. 2BV6. 2BV. vacuum pumps are supplied with single-acting mechanical seal and internal sealant supply (Standard construction), For the 2BV6. range, single-acting mechanical seal and double-acting mechanical seal with external sealant supply are also available. 1) 5-8 See materials of construction pages 5 to 8. 2 ) 1. DIN Measuring-surface sound-pressure level in acc.with DIN 5635, Part 13, measured at 1 m distance at medium inlet pressure (mbara) and with pipes connected. 3
4 Operating liquid flow, 50Hz 50 P1( 1) / 2) Operating liquid flow at 50Hz, for fresh water operation 1 ) / optional recirculation 2) of operating liquid Inlet pressure P1 (abs.) < mbar -500 mbar >500 mbar m 3 /h m 3 /h m 3 /h 2BV2: 2BV / / / BV / / / BV / / / 0. 2BV / / / BV5 / 2BV6: 2BV / / / BV / / / BV / / / BV / / / BV / / / 0.25, 50Hz Maximum permissible water carry-over or maximum permissible back pressure, three-phase current, 50Hz Max.of permitted water carry-over m 3 /h Max.permissible back pressure mbara 2BV2: 2BV BV BV BV BV5 / 2BV6: 2BV BV BV BV BV Special versions, nash_elmo nash_elmo vacuum pumps in monoblock and close-coupled design are also available as compressors. For further information please contact us. 1) Without discharge liquid separator. 2) With discharge liquid separator and internal operating liquid recirculation (accessory).
5 2BV2 Materials of construction for 2BV2 Material Part No. Name Grey cast iron /bronze /bronze 002A Grey cast iron Casing GB HT (ASTM A 8-92/CI 30B) 005A Chrome steel Motor shaft GB Cr13 (ASTM A 6-96/20) 006A Chrome steel Feather key GB Cr13 (ASTM A 6-96/20) 035A / Carbon/ceramic/fluorine- Mechanical seal caotchouc/chrome-nickel steel 036A Washer GB Cr18Ni12Mo2Ti (ASTM A 6-96/316Ti) 037A Steel Set screw GB DIN EN A Cast aluminium bronze Impeller DIN 171 G-CuAl10Ni (ASTM B 18-7,No.955) 08A Tolerance ring for impeller ASTM A 6-96/30 (ASTM A 6-96/30) 08B Cast aluminium bronze Port plate DIN171-G-CuAl10Ni (ASTM B 18-7,No.955) 050A Teflon Valve plate PTFE PTFE 051A Intercepting plate GB Cr18Ni12Mo2Ti (ASTM A 6-96/316Ti) 057A Nitrile-butadiene-caotchouc Sealing ring ASTM D a,NBR (ASTM D a,NBR) 061A Grey cast iron Endshield GB HT (ASTM A 8-92/CI 30B) 068A Steel Plug screw 068B Teflon Sealing ring PTFE PTFE 071A Pipe for cavitation protection GB Cr18Ni12Mo2Ti (ASTM A 6-96/316Ti) 072A Washer for cavitation protection GB Cr18Ni9 (ASTM A 2-75/30) 078B Steel Plug screw 080A Teflon Sealing ring PTFE PTFE 5
6 2BV5 Materials of construction for 2BV5 Material Part No. Name Grey cast iron /grey cast iron /bronze 002A Grey cast iron Casing GB HT (ASTM A 8-92/CI 30B) 005A Chrome steel Motor shaft GB Cr13 (ASTM A 6-96/20) 006A Chrome steel Feather key GB Cr13 (ASTM A 6-96/20) 035A / Carbon/ceramic/fluorine- Mechanical seal caotchouc/chrome-nickel -molybdenum steel 036A Chrome steel Washer GB Cr13 (ASTM A 6-96/20) 037A Steel Set screw GB DIN EN A Cast aluminium bronze Impeller DIN 171 G-CuAl10Ni (ASTM B 18-7,No.955) 08A Tolerance ring for impeller ASTM A 6-96/30 (ASTM A 6-96/30) 08B Grey cast iron Port plate GB HT (ASTM A 8-92/CI 30B) 050A Teflon Valve plate PTFE PTFE 051A Intercepting plate GB Cr18Ni12Mo2Ti (ASTM A 6-96/316Ti) 058A Nitrile-butadiene-caotchouc O-ring ASTM D a,NBR (ASTM D a,NBR) 061A Grey cast iron Endshield GB HT (ASTM A 8-92/CI 30B) 068A Steel Plug screw 068B Teflon Sealing ring PTFE PTFE 071A Teflon Pipe for cavitation protection PTFE PTFE 072A Washer for cavitation protection GB Cr18Ni9 (ASTM A 2-75/30) 078B Steel Plug screw 080A Teflon Sealing ring PTFE PTFE 6
7 2BV6 Materials of construction for 2BV6 (cast iron version) Material: Part No. Name Grey cast iron /Grey cast iron /Bronze 002A Grey cast iron Casing GB HT (ASTM A 8-92/CI 30B) 005A Chrome steel Pump shaft GB Cr13 (ASTM A 6-96/20) 006A Feather key GB Cr13 (ASTM A 6-96/20) 035A / Carbon/Ceramic/Fluorine- Mechanical seal caotchouc/chrome-nickel -molybdenum steel 036A Chrome steel Washer GB Cr13 (ASTM A 6-96/20) 037A Steel Set screw GB DIN EN A Cast aluminium bronze Impeller DIN 171 G-CuAl10Ni (ASTM B 18-7,No.955) 08A Tolerance ring for impeller ASTM A 6-96/30 (ASTM A 6-96/30) 08B Grey cast iron Port plate GB HT (ASTM A 8-92/CI 30B) 050A Teflon Valve plate PTFE PTFE 051A Intercepting plate GB Cr18Ni12Mo2Ti (ASTM A 6-96/316Ti) 058A Nitrile-butadiene-caotchouc O-ring (ASTM D a,NBR) 061A Grey cast iron Endshield GB HT (ASTM A 8-92/CI 30B) 068A Steel Plug screw 068B Teflon Sealing ring PTFE PTFE 071A Teflon Pipe for cavitation protection PTFE PTFE 072A Washer for cavitation protection GB Cr18Ni9 (ASTM A 2-75/30) 078B Steel Plug screw 080A Teflon Sealing ring PTFE PTFE 1A ML series coupling Flexible coupling 133A Grey cast iron Support GB HT (ASTM A 8-92/CI 30B) 7
8 2BV6 Materials of construction for 2BV6 (stainless steel version) Material: Part No. Name 002A Cast chrome-nickel steel Casing GB2-80-0Cr18Ni12M02Ti (ASTM A 73/A 73M-95/CF-3MN) 005A Pump shaft GB Cr18Ni12Mo2Ti (ASTM A 6-96/316Ti) 006A DIN 6885,chrome-nickel steel Feather key GB Cr18Ni12Mo2Ti (ASTM A 6-96/316Ti) 035A / Sic/Carbon/Viton,double(PTFE) Mechanical Seal sheathed/crnimo steel 037A Set screw GB Cr18Ni12Mo2Ti (ASTM A 6-96/316Ti) 07A Cast chrome-nickel steel Impeller GB2-80-0Cr18Ni12Mo2Ti (ASTM A 73/A 73M-95/CF-3MN) 08B Cast chrome-nickel steel Port plate GB2-80-0Cr18Ni12Mo2Ti (ASTM A 73/A 73M-95/CF-3MN) 050A Teflon Valve plate PTFE PTFE 051A Intercepting plate GB Cr18Ni12Mo2Ti (ASTM A 6-96/316Ti) 058A Viton,double(PTFE) sheathed O-ring 061A Cast chrome-nickel steel Endshield GB2-80-0Cr18Ni12Mo2Ti (ASTM A 73/A 73M-95/CF-3MN) 068A Plug screw 068B Teflon Sealing ring PTFE PTFE 071A Teflon Pipe of cavitation protection PTFE PTFE 072A Washer for cavitation protection GB Cr18Ni9 (ASTM A 2-75/30) 078B Plug screw 080A Teflon Sealing ring PTFE PTFE 1A ML series coupling Flexible coupling 1A Supporting disc GB Cr18Ni12Mo2Ti (ASTM A 6-96/316Ti) 131A Viton,double(PTFE) sheathed O-ring 1A Flange GB2-80-0Cr18Ni12Mo2Ti (ASTM A 73/A 73M-95/CF-3MN) 133A Grey cast iron Support GB HT (ASTM A 8-92/CI 30B) 3A Washer GB Cr18Ni12Mo2Ti (ASTM A 6-96/316Ti) 8
9 2BV2 Selection and ordering data accessories for 2BV2 Material For type Order No. Weight approx. kg 2BV N... 2BX1 061 Steel 2BV N... 2BX BV N... 2BX Discharge liquid separator 2BV N... 2BX including recirculation pipe and cavitation protection pipe 2BV N... 2BY BX Steel 2BV N... 2BY BX Non-return valve 2BV N... 2BY6 90-0BX (between flanges) 2BV N... 2BY6 90-0BX for vertical mounting 2BV N... 2BY HX BV N... 2BY HX BV N... 2BY6 90-0HX BV N... 2BY6 90-0HX BV N Cast iron 2BV N Mounting accessory 2BV N... Included in the 1.9 for direct mounting of the non- 2BV N... no-return valve 1.9 return valve onto the pump consisting of 1 set of flanges, fixing screws and gaskets Gas ejector (characteristic curves see page 1 ) Mains frequency 50 Hz and 60Hz 50Hz/60Hz,, Head;diffusor;nozzle 60V + 0V,, 2BV N... 2BP N 2 62V + 2V Cast iron;brass;brass 2BV N... 2BP N 2 61V + 1V 2BV N... 2BP N 2 63V + 3V 2BV N... 2BP N 2 70V + 0V 2BV N... 2BP N 3 72V + 2V 2BV N... 2BP N 3 71V + 1V 2BV N... 2BP N 73V + 3V 2BV N... 2BP N 9
10 2BV5, 2BV6 Selection and ordering data accessories for 2BV5 and 2BV6 Material type Order No. Weight approx. kg Steel 2BV K... 2BX1 12 2BV5 12./13.-0K... 2BX BV K... 2BX Discharge liquid separator 2BV H... 2BX including recirculation pipe 2BV. 12./13. -0H... 2BX cavitation protection pipe 2BV H... 2BX gaskets and screws 2BV K... 2BY BX Casing: Steel 2BV. 12./13.-0K... 2BY BX Non-return valve : 2BV K... 2BY BX (between flanges) Gasket:Teflon for vertical mounting : 2BV H... 2BY HX Casing:Chrome-nickel 2BV. 12./13. -0H... 2BY HX Steel 2BV H... 2BY HX : Gasket:Teflon, Flange: Steeel Mating flange Flange with gaskets and fixing screws Flange:Chrome-nickel Gas ejector (characteristic curves see page 1 ) Mains frequency 50 Hz 50Hz,, Head;Diffusor;Nozzle + 301V ; ; 2BV K... 2BP KC + 311V 2BV K... 2BP KC + 1V Ductile cast iron; 2BV K... 2BP KC + 331V Ductile cast iron; 2BV K... 2BP KC + 361V 2BV K... 2BP KC V,, 2BV H... 2BP HC + 311V 2BV H... 2BP HC + 1V 2BV H... 2BP HC + 331V 2BV H... 2BP HC + 361V 2BV H... 2BP HC 25 10
11 BV2 Dimensions for 2BV2 N1.0 N1.0 Suction connection N2.0 N2.0 Discharge connection N3.0 N3.0 Operating liquid connection N.2 N.2 Drain and sealant supply N8.7 N8.7 Cavitation protection (built-in) A B B1 E H1 H2 H3 H H6 M P2 P3 2BV V BV V BV V BV V R S2 W1 W2 W3 d N3.0 N.2 N8.7 2BV V 217 Ø G 1 G 3 / 8 G 3 / G 3 / 8 2BV V 236 Ø G 1 G 3 / 8 G 3 / G 3 / 8 2BV V 2 Ø G 1 1 / 2 G 3 / 8 G 3 / G 3 / 8 2BV V 8 Ø G 1 1 / 2 G 3 / 8 G 3 / G 3 / 8 11
12 2BV5 Dimensions for 2BV5 N1.0 N2.0 N3.0 N.2 N8.7 N1.0 Suction connection N2.0 Discharge connection N3.0 Operating liquid connection N.2 Dain and sealant supply N8.7 Cavitation protection (built-in) A B B1 B2 C1 C2 H1 H2 H3 H H5 H6 H7 K L 2BV BV BV BV BV F N S1 S2 T d1 d2 d3 d d5 2BV Ø Ø BV Ø Ø BV Ø Ø BV Ø 25- Ø BV Ø - Ø W1 W2 W3 d(n1.0,n2.0) N3.0 N.2 N8.7 2BV5 110 DN50 3/( 2) (2deep) 2BV5 111 DN50 3/( 2) (2deep) 2BV DN65 3/( 2) (2deep) 2BV DN65 3/( 2) (2deep) 2BV DN80 3/( 2) (2deep) 12
13 2BV6 Dimensions for 2BV6 (Cast iron version) N1.0 N2.0 N3.0 N.2 N8.7 N1.0 Suction connection N2.0 Discharge connection N3.0 Operating liquid connection N.2 Dain and sealant supply N8.7 Cavitation protection (built-in) A max B B1 C1 F1 F2 max H1 H2 H3 H H6 H7 K L N 2BV K BV K BV K BV K BV K W1 W2 W3 S1 T d1 d2 d3 d d5 2BV K... Ø BV K... Ø BV K Ø BV K Ø BV K Ø d(n1.0,n2.0) N3.0 N.2 N8.7 2BV K... DN50 G 3/( 2) (2deep) 2BV K... DN50 G 3/( 2) (2deep) 2BV K... DN65 G 3/( 2) (2deep) 2BV K... DN65 G 3/( 2) (2deep) 2BV K... DN80 G 3/( 2) (2deep) 13
14 2BV6 Dimensions for 2BV6 ( version) N1.0 N1.0 Suction connection N2.0 N2.0 Discharge connection N3.0 N3.0 Operating liquid connection N.2 N.2 Dain and sealant supply N8.7 N8.7 Cavitation protection (built-in) A max B B1 C1 F1 F2 max H1 H2 H3 H H6 H7 K L N 2BV H BV H BV H BV H BV H W1 W2 W3 S1 T d1 d2 d d3 d5 2BV H... Ø BV H... Ø BV H Ø BV H Ø BV H Ø d(n1.0,n2.0) N3.0 N.2 N8.7 2BV H... DN50 DN+G 3/ ( 2/2deep) 2BV H... DN50 DN+G 3/ ( 2/2deep) 2BV H... DN65 DN+G 3/ ( 2/2deep) 2BV H... DN65 DN+G 3/ ( 2/2deep) 2BV H... DN80 DN+G 3/ ( 2/2deep) 1
15 2BV. Dimensions for accessories 2BV. N2.2 N3.0 N2.2 Separator overflow N3.0 Operating liquid connection Discharge liquid separator without cavitation protection pipe Discharge liquid separator with 2BV cavitation protection pipe connected Discharge liquid separator for 2BV Order No. For type a a1 Ø d f g Ø h k m p r t t1 2BX BX BX BV BV BV BX BV N2.2 N3.0 N2.2 Separator overflow N3.0 Operating liquid connection Discharge liquid separator without cavitation protection pipe Discharge liquid separator with 2BV5 2BV6 -OK Cavitation protection pipe connected Discharge liquid separator for 2BV5 and 2BV6 -OK Order No. For type a* a1* b fd f1 f2 g fh k* m p r t w1 2BX1 2BX1 2BV BV / /22 2/33 3/ /925 91/ BX BX BX BV BV BV /27 29/ / / /7 25/ /95 955/ / * : 2BV6-0K The dimentions after / are for 2BV6-0K N2.2 1) Separator overflow 1) N3.0 Operating liquid connection 1) 2BX1 10. : GB/T91 ANSI-1 1/ -0 2BX1 10. : Flange suitable for GB/T91 and ANSI-1 1 / -0 2) 2BX1 102: GB/T91 ANSI-2-0 2BX1 102: Flange suitable for GB/T91 and ANSI-2-0 2BX1 103: GB/T91 ANSI-2 1 / 2-0 2BX1 103: Flange suitable for GB/T91 and ANSI-2 1 / 2-0 2BX1 107: GB/T91 ANSI--0 2BX1 107: Flange suitable for GB/T91 and ANSI--0 3) 2BX BX1 103 GB/T9118 2BV6...-OH Discharge liquid separator for 2BV6...-0H 2BX1 102 and 2BX1 103 : Loose flange suitable for GB/T9118 Order No. For type a b c d e f g h1 h2 h3 h d2 d3 d d2 d3 2BX BX BX BX BX BV BV BV BV BV
16 2BV Dimensions for accessories 2BV. Gas ejector 2BP1 061 Gas ejector 2BP1 07. Gas ejector 2BP5 2BV5 2BV6 Gas ejector for 2BV5 and 2BV6 Order No. For type a d1 d2 d3 d d5 d6 d7 h1 Ø R 1 Ø R 2 Ø R 3 50Hz 2BP C 2BP C 2BP C 2BP C 2BP C 2BV BV BV BV BV Hz 2BP C 2BP C 2BP C 2BP C 2BP C 2BV BV BV BV BV BV2, 2BV5 2BV6 Non-return valve for 2BV2,2BV5 and 2BV6 Order No. For type e f g 2BY X08 2BY X08 2BV2 060/2BV BV2 070/2BV G1 G1 1 / BY X08 2BV. 110/2BV BY X08 2BY X08 2BV.121/2BV BV BY6 903/-0.X08 2BY6 905/6/8-0.X08 1) Loose flange with mounting accessory 2BY6 905/6/8-0.X08 without mounting accessory Gardner Denver Nash China Ltd. C :F20N06-2BVsheet
SIHI LPH-X - Liquid Ring Vacuum Pump Two Stage
- Liquid Ring Vacuum Pump Two Stage 45008, 45311, 45316 Pressure Range: Suction Volume: 33 to 1013 mbar 55 to 258 m³/h CONSTRUCTION Sterling SIHI liquid ring vacuum pumps have a simple but robust construction
More information2BV SERIES VACUUM PUMP
2BV SERIES VACUUM PUMP Notes: This function curve is saturated air serve as 20 at the inhalation medium, 15 s' work liquid temperature, and exhausts to get under the state of pressure 1013mba. The function
More informationSIHI LPH-X - Liquid Ring Vacuum Pump One Stage
- Liquid Ring Vacuum Pump One Stage LPH 40106, LPH 40411, LPH 40516 Pressure Range: Suction Range: 150 to 1013 mbar 50 to 270 m³/h CONSTRUCTION Sterling SIHI liquid ring vacuum pumps have a simple but
More informationSIHI LPH-X - Liquid Ring Vacuum Pump Two Stage
- Liquid Ring Vacuum Pump Two Stage LPH 45008, LPH 45311, LPH 45316 Pressure Range: Suction Volume: 33 to 1013 mbar 55 to 258 m³/h CONSTRUCTION Sterling SIHI liquid ring vacuum pumps have a simple but
More informationLiquid ring vacuum pumps in compact design
Liquid ring vacuum pumps in compact design LEM 90, LEM 125, LEM 150 LEL 90, LEL 125, LEL 150 Pressure range: Suction volume flow: 33 to 1013 mbar 32 to 170 m³/h CONSTRUCTION TYPE SIHI liquid ring vacuum
More informationFLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8
FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:
More informationLiquid ring vacuum pumps
Liquid ring vacuum pumps LEH 350, LEH 450 Pressure range: Suction volume flow: 33 to 1013 mbar 120 to 535 m³/h CONSTRUCTION TYPE SIHI liquid ring vacuum pumps are displacement pumps of uncomplicated and
More informationLiquid ring vacuum pumps with magnetic coupling
Liquid ring vacuum pumps with magnetic coupling LPH 75320, LPH 75330, LPH 75340 Pressure range: Suction volume flow: 33 to 1013 mbar 485 to 1615 m³/h CONSTRUCTION TYPE Sterling SIHI liquid ring vacuum
More informationType 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.
Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing
More informationLiquid ring compressors
Liquid ring compressors KPH 65212, KPH 65218 Compression pressures: Suction volume flow: 2 to 7 bar 375 to 660 m³/h CONSTRUCTION TYPE Sterling SIHI liquid ring compressors are displacement compressors
More informationPrem Chem Butterfly Valves
10 butterfly Valves Prem Chem Butterfly Valves butterfly Valves 11 Design standards: gb12238, API609, MSS SP-67, MSS SP-68 Butterfly valves have become very popular because of compactness, weight and ease
More information2BE3 and P2620 Liquid Ring Vacuum Pumps and Compressors
2BE3 and P2620 Liquid Ring Vacuum Pumps and Compressors NASH 2BE3 and NASH P2620: A Wide Application Range NASH 2BE3 and NASH P2620: Reliable and Efficient The liquid ring vacuum pumps and compressors
More informationSIHI SuperNova. Volute casing pumps. Type ZLIC TECHNICAL DATA. 0B, 0C, 4B max. 120 C Casing pressure: PN 16 / PN 10 1)
Volute casing pumps SIHI SuperNova Type ZLIC 040160... 200 TECHNICAL DATA Output: Head: Speed: Material: Temperature: max. 330 m³/h max. 60 m max. 3600 rpm grey cast iron: 0B, 0C material design: 0B, 0C,
More informationSafety Relief Valves Commanche Techmatic Controls
Safety Relief Valves Commanche Techmatic Controls Product description Material Properties Connection W. Pres (Bar) W. Temp ( ) 1. Commanche-317 ISO 9001 (DN 12-50) SV-B27 Bronze Without lever Threaded
More informationSILI PUMP, Your reliable one-stop supplier of marine pumps.
SILI PUMP, Your reliable one-stop supplier of marine pumps. Shanghai SILI PUMP Industry Co., Ltd. Add: No.128 Jinyuan Road, 201518, Shanghai, China (Jinyuan Industry Area) Tel: 0086-21-39109967, fax: 0086-21-39109967
More informationType 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
More informationA type Ejectors (in line) Dimensions and weights
A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created
More informationDatenblatt Flüssigkeitsringpumpe Data sheet liquidring pump
Datenblatt Flüssigkeitsringpumpe Data sheet liquidring pump Serie Series L-BV5 L_300 Flüssigkeitsringpumpen Liquid ring pumps 3 AC; 50/60 Hz 3 AC; 50/60 Hz Vakuumbetrieb Vacuum operation Typen Types 2BV5
More informationCR3-2 A-FGJ-A-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CR3-2 A-FGJ-A-E-HQQE 3x23/4 5HZ Grundfos Pump 96516649 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96516649/cr-3-2-a-fgj-a-e-hqqe.html
More informationInline pumps Series INP
Series informationen INP_02_EN Inline pumps - Overview of products - Executions - Materials - Types of seals - Dimensional drawings General Description The centrifugal pumps series INP are single stage,
More informationCR3-6 A-FGJ-A-E-HQQE 1x220/240 50HZ
GRUNDFOS DATA BOOKLET CR3-6 A-FGJ-A-E-HQQE 1x2/240 50HZ Grundfos Pump 96537577 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96537577/cr-3-6-a-fgj-a-e-hqqe.html
More informationCR1-3 A-FGJ-A-E-HQQE 1x220/240 50HZ
GRUNDFOS DATA BOOKLET CR1-3 A-FGJ-A-E-HQQE 1x22/24 5HZ Grundfos Pump 96537538 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96537538/cr-1-3-a-fgj-a-e-hqqe.html
More informationXFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump
XFLO P U M P S XS SERIES Single Stage Double Suction Split Casing Centrifugal Pump General and Construction 1. Applications Waterworks, Irrigation, Drainage pumping stations, Power stations, Industrial
More informationCR5-6 A-FGJ-A-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CR5-6 A-FGJ-A-E-HQQE 3x23/4 5HZ Grundfos Pump 9651741 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9651741/cr-5-6-a-fgj-a-e-hqqe.html
More informationData sheet. Page: 1 / 5. ETL GGSAV11D BKSBIE3 Inline pump. Operating data. Design
Data sheet Page: 1 / 5 Operating data Requested flow rate Operating data determined for maximum inlet pressure Requested developed head 15.00 m Pumped medium Ambient air temperature 20.0 C Fluid temperature
More informationVERTICAL IN-LINE PUMP
VERTICAL IN-LINE PUMP TECHNICAL FEATURES ELINE: Vertical centrifugal pumps, single impeller, volute casing, non-self priming pump, in-line executive, with mechanical seal. Hydraulically designed in line
More informationType 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
More informationCR3-19 A-FGJ-A-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CR3-19 A-FGJ-A-E-HQQE 3x23/4 5HZ Grundfos Pump 96516663 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96516663/cr-3-19-a-fgj-a-e-hqqe.html
More informationDrainage pumps Series KEP
Series information KEP_0_EN Drainage pumps - Overview of products - Executions - Materials - Sectional and dimensional drawings General description Drainage pumps series KEP are single stage, normal priming
More informationBoiler Feed Booster Pump YNK. Type Series Booklet
YNK Type Series Booklet Legal information/copyright Type Series Booklet YNK All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed for any
More informationFloCheck is a precision engineered, twin plate check valve suitable for product or service lines, wherever non-return protection is required.
FloCheck is a precision engineered, twin plate check valve suitable for product or service lines, wherever non-return protection is required. Features Twin plate, flat seat design for enhanced sealing.
More informationSump pumps Series ETP
Series information ETP_02_EN Sump pumps - Overview of products - Executions - Materials - Types of seals - Dimensional drawings Pump ETP 50-125-15-4 with integrated discharge pipe (VS1) General description
More informationISO 2858 Back Pullout End Suction Centrifugal Pumps
ISO 2858 Back Pullout End Suction Centrifugal Pumps Back Pullout End Suction Centrifugal Pumps Applications: Irrigation Water transfer Building Services Pressure Boosting Mining HVAC Features: Designed
More informationSITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices. Orifice plate with annular chambers. 4/358 Siemens FI
Application Dimensional drawings Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -60 to +550 C. Design Two support rings with replaceable orifice disk
More informationAPOVAC R Vacuum Systems
APVAC R Vacuum Systems with closed ring-liquid loop for the suction and recovery of gases and vapours APVAC = Anti Pllution VACuum PED APVAC R APVAC Vacuum systems with closed ring-liquid loop for the
More informationMODEL INFORMATION CANNED MOTOR PUMP TYPE CAM HERMETIC
MODEL INFORMATION CANNED MOTOR PUMP TYPE CAM HERMETIC ... 3... 4 3000 rpm 50 Hz / 3600 rpm 60 Hz... 4... 5... 7 Modular pump / motor systems... 7 Materials...........................................................
More informationDry installed end-suction pumps, LSN-series. according to ISO 2858 / ISO 5199
Dry installed end-suction pumps, LSN-series according to ISO 2858 / ISO 5199 Technical characteristics Performance 50 Hz 60 Hz Capacity up to 600 m 3 /h 2900 USgpm Head up to 170 m 800 feet Speed up to
More informationProducts RUVAC WA/WAU 251 to 2001 Roots Vacuum Pumps with Air-Cooled Flange-Mounted Motors
Products RUAC WA/WAU 251 to 2001 Roots acuum Pumps with Air-Cooled Flange-Mounted Motors RUAC WAU 2001 single-stage Roots vacuum pump, depicted with a 160 ISO-K collar flange Advantages to the User - Two
More informationCPS. Horizontal Split Case Centrifugal Pump
CPS Horizontal Split Case Centrifugal Pump CPS Series pumps, are single-stage double suction split case centrifugal pumps designed for applications of clean water or similar liquids without solids in water
More informationConcentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
More informationGIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN
GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN Goulds Water Technology is renowned for manufacturing the highest quality pumping equipment utilizing the best engineering practices available worldwide.
More informationCR15-02 A-F-A-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CR15-2 A-F-A-E-HQQE 3x4D 5 HZ Grundfos Pump 9651893 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9651893/cr-15-2-a-f-a-e-hqqe.html
More informationCR5-26 A-FGJ-A-E-HQQE 3x400D 50HZ
GRUNDFOS DATA BOOKLET CR5-26 A-FGJ-A-E-HQQE 3x4D 5HZ Grundfos Pump 96513391 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96513391/cr-5-26-a-fgj-a-e-hqqe.html
More informationMaterials : Cast iron or stainless steel body
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 Between flanges PN10/16 or PN25-10 C + 90 C for NBR, 110 C for EPDM,180 C for FKM Max Pressure : 10 to 16 Bars ( according
More informationGA 24 Heavy-duty variable area flowmeter
KROHNE 10/99 D 11 GA24 01 E GR Heavy-duty variable area flowmeter Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters Level measuring
More informationData sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m
Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency
More informationCompany name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 14/03/2017
Position Qty. Description 1 CR 32-3-2 A-F-A-E-HQQE Phone: 8 61 Date: 1/3/217 Product No.: 961221 Note! Product picture may differ from actual product Liquid: Pumped liquid: Water Liquid temperature range:
More informationseries series liquid ring vacuum pumps liquid ring vacuum pumps
The monostage liquid ring pump with valves introduces a new and innovative design, new performances and reliability and it is the result of Pompetravaini s experience and customers opinions and suggests.
More informationCompany name: GRUNDFOS (Singapore) Pte. Ltd. Created by: Angie Ang Phone: Date: 23/03/2017
Position Qty. Description 1 CR 15-7 A-F-A-E-HQQE Date: 3/3/17 Product No.: On request Note! Product picture may differ from actual product Liquid: Pumped liquid: Water Liquid temperature range: -.. 1 C
More informationType 455, 456. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 455, 456 Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 468.08-E 462.01-D 40 Cap H2 19 Lock nut 18 Adjusting screw 16 Upper spring plate 9 Bonnet 12 Spindle 54
More informationData sheet. Etaline GN /3002 G11 Version no.: 1 Inline pump. Operating data. Design. Clean water. Efficiency 61.6 % 20.0 C.
Data sheet Item no.: 1900 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 72.19 m ³/h Operating data determined for maximum inlet pressure Actual developed head 70.26 m Clean water Efficiency
More informationData sheet: Wilo-TOP-Z 50/7 (3~400 V, PN 6/10, RG)
Data sheet: Wilo-TOP-Z 5/7 (3~4 V, PN 6/1, RG) Pump curves Three-phase current H/m 7 6 5 4 3 2 1 P1/W 6 4 2 v,5 1 1,5 2 2,5 3 3,5 Wilo-TOP-Z 5/7 3~4 V - DN 5 1 2 3 4 5 6 7 Dimension drawing 66 66 DN 5
More informationGARO Liquid Ring Compressors
GARO Liquid Ring Compressors NASH Liquid Ring Compressor Systems GARO Compressors The GARO line is Gardner Denver Nash s newest line of liquid ring compressor products. It expands the capacity and pressure
More informationContents. Identification
Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304 FITTINGS 305
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 3-4-5-6 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 7-8-9 IMPELLERS
More informationWaste Water, Condensate and Heat Transfer Fluid Pump. Type Series Booklet
Waste Water, Condensate and Heat Transfer Fluid Pump Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied,
More informationSERIES R - MD MOR & GOR
SERIES R - MD MOR & GOR CHARACTERISTICS OPTIONS Aluminium alloy construction Surface protection treatment (anodising, only for ATEX 2 versions) Available in monoblock execution (MOR) and with coupling
More informationHigh performance valve with Nitrile/VITON elastomer. DN 80 to 800 (3 to 32 ) Pressure class: Class 150 Design in accordance with ASME B16.42 / B16.
Type series booklet 8460.1215/7--10 High performance valve with Nitrile/VITON elastomer DN 80 to 800 (3 to 32 ) Pressure class: Class 150 Design in accordance with ASME B16.42 / B16.34 Applications Marine,
More informationCompany name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 13/03/2017
Position Qty. Description 1 NB 1-31/29 A-F2-B-E-BAQE Phone: 4 84 61 Date: 13/3/217 Product No.: On request Non-self-priming, single-stage, centrifugal volute pump designed according to ISO 199 with dimensions
More information3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE
More informationRWCP, RWCN. Vertical pumps for tanks for loaded liquids. 1. Fields of Application. 3. Design. 4. Designation. 2. Operating Data
Type series booklet CTI-4900/01 [04-2012] RWCP, RWCN Vertical pumps for tanks for loaded liquids 1. Fields of Application RWCP and RWCN are vertical, centrifugal pumps designed for wells, ditches and tanks.
More informationCR15-10 A-F-A-E-HQQE 11kW 3x400D 50Hz
GRUNDFOS DATA BOOKLET CR15-1 A-F-A-E-HQQE 11kW 3x4D 5Hz Grundfos Pump 965191 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/965191/cr-15-1-a-f-a-e-hqqe.html
More informationfranklinwater.com 50 Hz 6" STS SERIES Submersible Turbine Pumps
franklinwater.com 5 Hz 6" STS SERIES Submersible Turbine Pumps 2 FEATURES Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump
More informationSelection Chart Project: Model: Chk d: Date: C C V V V A CAPACITY
Selection Chart Project: Model: Chk d: Date: 45 (Ft) (m) 15.0 HZ (Synchronous Speed - 1800 RPM) 35 C2905-7 25.0 8.0 C1125-17 C15-1170 C2185-885 7.0 TOTAL HEAD 15 6.0 5.0 C1455-1170 V0494-1170 V0554-1170
More informationWaste Water, Condensate and Heat Transfer Liquid Pump. Type Series Booklet
Waste Water, Condensate and Heat Transfer Liquid Pump MK Type Series Booklet Legal information/copyright Type Series Booklet MK All rights reserved. The contents provided herein must neither be distributed,
More informationType 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
More informationINDUSTRY APPLICATION. S -pumps are used in: Industry Waste treatment Environment protection Construction industry Civil engineering
INDUSTRY APPLICATION Self-priming centrifugal pumps of type S are used for pumping clean and contaminated liquids containing solids. The special design makes them suitable also for abrasive liquids. S
More informationCHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL
CHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS 125 2500 MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL CHAMPION VALVES, INC. DUAL DISC SPRING LOADED WAFER
More informationSIHI prime - Side Channel Pumps Self-priming, segmental type
SIHI prime - Side Channel Pumps Self-priming, segmental type AKH-X 1201 3606 TECHICAL DATA Capacity: Delivery head: Speed: from 0.4 up to 7.5 m³/h from 10 up to 242 m 1450 rpm (max. 1800 rpm) Temperature:
More informationCR1-3 A-A-A-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CR1-3 A-A-A-E-HQQE 3x23/4 5HZ Grundfos Pump 9651617 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9651617/cr-1-3-a-a-a-e-hqqe.html
More informationCR1-6 A-A-A-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CR1-6 A-A-A-E-HQQE 3x23/4 5HZ Grundfos Pump 96516174 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96516174/cr-1-6-a-a-a-e-hqqe.html
More informationEtanorm SYT Type Series Booklet
Thermal Oil / Hot Water Pump Etanorm SYT Type Series Booklet Legal information/copyright Type Series Booklet Etanorm SYT All rights reserved. The contents provided herein must neither be distributed, copied,
More informationCompany name: Created by: Phone:
Position Qty. Description 1 TP 8-/2 A-F-A-BQQE Date: 29/1/18 Product No.: 9618724 Single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter. The pump is of
More informationSide Channel Pumps Self-priming, segmental type
Side Channel Pumps Self-priming, segmental type AKH 1101 6103 Technical data Capacity: from 0,2 up to 35 m³/h Head: from 6 up to 144 m Speed: 1450 rpm (max. 1800 rpm) Temperature: max. 120 C Casing pressure:
More informationCRN3-3 A-FGJ-G-V-HQQV 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN3-3 A-FGJ-G-V-HQQV 3x23/4 5HZ Grundfos Pump 9651685 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn3/9651685/crn-3-3-a-fgj-g-v-hqqv.html
More informationCRI3-6 A-FGJ-I-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRI3-6 A-FGJ-I-E-HQQE 3x23/4 5HZ Grundfos Pump 96527892 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/cri3/96527892/cri-3-6-a-fgj-i-e-hqqe.html
More informationCR10-01 A-A-A-E-HQQE 1x220/ HZ
GRUNDFOS DATA BOOKLET CR1-1 A-A-A-E-HQQE 1x22/24 5 HZ Grundfos Pump 965872 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/965872/cr-1-1-a-a-a-e-hqqe.html
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 32-250/7.56 203 PERFORMANCE CURVES 32-250/9.26 203 PERFORMANCE CURVES
More informationCompany name: Created by: Phone:
Position Qty. Description 1 TP -42/2 A-F-A-BQQE Date: 26/1/218 Product No.: 9874287 Single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter. The pump is
More informationType 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet
More informationCR3-13 A-A-A-E-HQQE 1x220/240 50HZ
GRUNDFOS DATA BOOKLET CR3-13 A-A-A-E-HQQE 1x22/24 5HZ Grundfos Pump 9653816 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9653816/cr-3-13-a-a-a-e-hqqe.html
More informationCR1-9 A-A-A-E-HQQE 1x220/240 50HZ
GRUNDFOS DATA BOOKLET CR1-9 A-A-A-E-HQQE 1x2/240 HZ Grundfos Pump 96529477 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96529477/cr-1-9-a-a-a-e-hqqe.html
More informationANSI Centrifugal Process Pumps. 911 Series
ANSI Centrifugal Process Pumps 9 Series WHAT IS AN ANSI PUMP In 977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition
More informationCR1S-6 A-A-A-E-HQQE 1x220/240 50HZ
GRUNDFOS DATA BOOKLET CR1S-6 A-A-A-E-HQQE 1x22/24 5HZ Grundfos Pump 96531687 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96531687/cr-1s-6-a-a-a-e-hqqe.html
More informationEtaline MN. In-line Pumps
Type Series Booklet 1146.51/05--EN Etaline In-line Pumps Automation products available: Hyamaster hyatronic Fields of Application F Heating systems F Air-conditioning systems F Cooling circuits F Service
More informationabcdef EUseries EN733/DIN End Suction Centrifugal Pumps where innovation flows SNG
abcdef SNG 09 where innovation flows EN7/DIN 22 End Suction Centrifugal Pumps www.euroflopumps.com Coding System Eg. EU 2 / 1 MBC DB EUM / 2 MBC A2-01 Series EU = Bareshaft pumps EUM = Monobloc pumps X
More informationDischarge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500. Split Coupled Vertical In-Line Pumps BVL
Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500 Split Coupled Vertical In-Line Pumps BVL Split Coupled Vertical In-Line Pumps Capacities up to 12,000 GPM Heads up to 560 ft
More informationINVCP, INVCN. Vertical pumps for tanks. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data
Type series booklet CTI-0300/03 [05-2012] INVCP, INVCN Vertical pumps for tanks 1. Fields of Application INVCP pumps are used for organic and inorganic liquids in water services and different industries.
More informationMTB /183 A-F-A-BQQV 400D-2 11kW
GRUNDFOS DATA BOOKLET MTB 65-2/13 A-F-A-BQQV D-2 11kW Grundfos Pump 965751 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/mtb/965751/mtb-65-2-13-a-f-a-bqqv.html
More informationCR10-02 A-A-A-E-HQQE 3x230/ HZ
GRUNDFOS DATA BOOKLET CR1-2 A-A-A-E-HQQE 3x23/4 5 HZ Grundfos Pump 96598 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96598/cr-1-2-a-a-a-e-hqqe.html
More informationALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
More informationCR45-10 A-F-A-E-HQQE 3x400/ HZ
GRUNDFOS DATA BOOKLET CR45-1 A-F-A-E-HQQE 3x4/69 5 HZ Grundfos Pump 96122815 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96122815/cr-45-1-a-f-a-e-hqqe.html
More informationThese PFA and PTFE lined products offer a reliable solution in hazardous applications
These PFA and PTFE lined products offer a reliable solution in hazardous applications Features Check valves Heavy duty body in ductile iron GGG4.3 (ASTM A-395). Heavy duty PFA or PTFE lining. Borosilicate
More informationType 441 ANSI 442 ANSI. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 ANSI 442 ANSI Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.05-E 462.01-D Conventional design 40 Cap H2 18 19 16 Adjusting screw Lock nut Upper spring
More informationCR3-10 A-A-A-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CR3-1 A-A-A-E-HQQE 3x23/4 5HZ Grundfos Pump 96516597 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96516597/cr-3-1-a-a-a-e-hqqe.html
More informationType 441 ANSI 442 ANSI. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 ANSI 442 ANSI Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.04-E Conventional design 40 Cap H2 18 19 16 Adjusting screw Lock nut Upper spring plate
More informationGESTRA DISCO Non-Return Valves RK 41, PN 16. Non-Return Valves PN 6/10/16 DN (½ 8") RK 41, PN 16. Application for liquids, gases, vapours.
GESTRA DISCO Non-Return Valves RK 41, PN 16 Gestra Steam Systems GESTRA Non Return Valves RK 41 PN 6/10/16 15-200 (1/2" - 8") Issue Date: 8/01 Non-Return Valves PN 6/10/16 15 200 (½ 8") RK 41, PN 16 A2
More informationData sheet. KRTF /24XEG-S IE3 Version no.: 3. Operating data. Design. Driver, accessories
Data sheet Item no.: 100 Page: 1 / 5 Operating data Requested flow rate 178.00 US GPM Requested developed head 14.40 ft Pumped medium Water Clean water Not containing chemical and mechanical substances
More informationCR10-04 A-A-A-E-HQQE 15kW 3x400Y 50Hz
GRUNDFOS DATA BOOKLET CR1-4 A-A-A-E-HQQE 15kW 3x4Y 5Hz Grundfos Pump 965982 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/965982/cr-1-4-a-a-a-e-hqqe.html
More information