Drainage pumps Series KEP
|
|
- Belinda Sutton
- 5 years ago
- Views:
Transcription
1 Series information KEP_0_EN Drainage pumps - Overview of products - Executions - Materials - Sectional and dimensional drawings
2
3 General description Drainage pumps series KEP are single stage, normal priming centrifugal pumps with a long shaft and column pipe for mounting into pits and sumps. Versions with a mounting length as from,6 have grease lubricated guide bearings. Fields of application Main field of application of the drainage pumps series KEP is the drainage of pits and sumps in which no submersible pump can or should be used. The advantage of the motor on the top is the easier maintenance, the dry set up of the motor and the thus following saving of costs. Most of our KEP pumps are used in the following purposes: - Drainage of garage and basements - Discharging of tanks - Recirculation of liquids in holding tanks Operating data Flow: Total head: Motor power: Q up to 6 m³/h H up to m P from 0, kw to, kw Degrees of protection: IP or IP 6 Connections The pump is suctioning directly at the bottom of the casing. The pressure connection is equipped with a threaded counter flange according to DIN - PN 6. Connections with different dimensions of threads or flanges are available on request. Motors As motors are single or triple phase induction motors with fixed bearing at the drive end used. Voltages: for ~ execution: 0V, 0Hz for ~ execution: Degree of protection: IP or IP 6 up to.kw 0/0V, 0Hz from kw 0/690V, 0Hz up to.6kw 6/60V, 60Hz from.6kw 60V, 60Hz other voltages/frequencies are available on request. Direction of rotation: Clock-wise viewed onto fan cover.
4 Type Code KEP-F ½ -, - D - SW Series Execution of impeller Nominal size of discharge connection Mounting length Type of motor Float switch Series: KEP KEPL - Standard version - Pump with bearing bracket and flexible coupling Execution of impeller: B F - Standard version with closed channel type impeller - Channel type impeller with special geometry - Pump with vortex impeller The free passage through the impeller is mm for the KEP ½, 0 mm for the KEP and mm for the KEP ½. Nominal size of discharge connection: See dimensional drawing, characteristic curve resp. Mounting length: Type of motor: Length in meters D - Triple phase motor ~ W - Single phase motor ~ Float switch: SW - Without float switch - Float switch with hand-automatic-selection-switch and overload protection Materials Material code Part Casing Impeller Y0 Cast iron - GG Cast iron - GG 0 Standard - Y0 Cast iron - GG Cast iron - GG 0 Y0 Bronze Bronze Shaft Chromium steel -. Duplex -.6 Y0 Stainless steel - 6 Stainless steel - 6 Column pipe Carbon steel Stainless steel Material Cast iron German description German material code number EU - Description EU - material code number ASTM - UNS - description GG EN-GJL-00 JL 00 A - Grade 0 GG 0.60 EN-GJL-0 JL 0 A - Grade Bronze G-CuSn CuSn0-C CC0K-GS B0 - C90700 Steel St SJR.007 A9-0 Sliding bearing Lantern Cast iron - GG 0 Bronze Cast iron - GG 0 Additionally for KEPL Bearing bracket Cast iron - GG 0 Bearing housing Cast iron - GG 0 Bronze Carbon Stainless steel Chromium steel X0 Cr. X0Cr. A76 - S000 Stainless steel - 6 Duplex G-XCrNiMo 9-- X6 CrNiMoTi 7-- X CrNiMoN GXCrNiMo 9-- X6CrNiMoTi 7-- X CrNiMoN --. A - CFM - J A76 - S6.6 A76 -S0 Other materials are available on request.
5 Characteristic curve KEP ½, KEP und KEP ½ H [m] 0 0Hz - 00min - H [m] 0 60Hz - 00min KEP ½ 0 KEP ½ 0 KEP KEP KEP ½ KEP ½ Q [m³/h] Q [m³/h] Characteristic curve KEP-F ½, KEP-F und KEP-F ½ H [m] 0 0Hz - 00min - H [m] 0 60Hz - 00min KEP ½ 0 KEP KEP ½ 0 KEP ½ KEP KEP ½ Q [m³/h] Q [m³/h] Characteristic curve KEP-F ½ H [m] 0 0Hz - 000min - H [m] 0 60Hz - 600min KEP ½ KEP ½ Q [m³/h] Q [m³/h]
6 Dimensional drawing KEP(L) ½, KEP(L) und KEP(L) ½ H ET h b b b b DND H KEP ET a h H b b b b ET DND h KEPL with intermediate bearings b b b b a DND KEPL a
7 Dimensional drawing KEP(L) ½, KEP(L) und KEP(L) ½ Type DN a b b b b h KEP(L) ½ G ½ KEP(L) G 7 9 KEP(L) ½ G ½ Type KEP ½ KEP-F ½ KEPL ½ KEPL-F ½ KEP KEP-F KEPL KEPL-F KEP ½ KEP-B ½ KEP-F ½ KEPL ½ KEPL-B ½ KEPL-F ½ Mounting length (ET) Motor 0,6 m,0 m, m,6 m m, m,6 m kw n [min-] H kg H kg H kg H kg H kg H kg H kg 0, - ~ 0,, 0,/0,66 0/ ,7 - ~ 0 7 0, 0,7/0,9 0/70 0, - ~ 0 7,, 9,, 0,/0,66 0/70 0,7 - ~ ,,, 0,7/0,9 0/70,/, 900/00 9,,, 6,/, 900/00 9 9,,, ,/,6 900/00 9,, 9, 9 6,0/,6 900/00 6 9, 76, 0 60, ,0/, 900/00 6 9, 76, 0 6, ,7 - ~ 0, ,7/0,9 0/70, - ~ 0, 6,/, 0/ , - ~ 0, 6,/, 0/70, - ~ 0, 9 7 6,/,6 0/70 0,7 - ~ , 0, ,7/0,9 0/70, - ~ 0 7 9, 6, ,/, 0/ , - ~ 0 9,, 6 6 7,/, 0/70, - ~ , 0 6, ,/,6 0/70, - ~ 0 9, 6 6,/,6 0/ ,0/,6 0/70 9, 6 6,0/, 0/ , 760 7,, - ~ , 79, 9 9,/,6 0/ ,0/,6 0/ ,, 9 9,0/, 0/70 9 7, 667 7, , , 7 00, Greater mounting length on request.
8 Sectional drawing KEP(-F) ½, KEP(-F), KEP(-F) ½ KEP Part-No. Description 0 Casing 6 Casing cover 0 Shaft 0 Impeller 0 Sliding bearing Lantern 7 Column pipe 0 Motor 9 Sleeve coupling The pumps version KEP without bearing are only available up to an mounting length of. m. For taller mounting length the pumps version KEPL with bearing are used. This version is equipped with one intermediate bearing for the mounting lengths.6 m and.00 m and with two intermediate bearings for the mounting lengths.0 m and.6 m. 6
9 Sectional drawing KEPL(-F) ½, KEPL(-F), KEPL(-F) ½ Part-No. Description 0 Casing 6 Casing cover 0 Shaft 0 Impeller 0 Sliding bearing 0.0 Sliding bearing 0 Bearing housing Bearing bracket 7 Column pipe 0 Motor 6, 6 Coupling complete KEPL KEPL with intermediate bearing 7
10 Customer specific special executions KEPL with control switch and level electrodes KEPL with sole plate KEP with float switch with guide rod
11
12 Edition 0/07 Specifications subject to change without notice
Drainage pumps Series KEP
Series information KEP_02_EN - Product overview - Executions - Materials - Sectional and dimensional drawings We are your partner in transporting any liquid from one place to another. We offer a wide range
More informationSump pumps Series ETP
Series information ETP_02_EN Sump pumps - Overview of products - Executions - Materials - Types of seals - Dimensional drawings Pump ETP 50-125-15-4 with integrated discharge pipe (VS1) General description
More informationCompact pumps Series EBP, LD/S, ME
Series information EBP_02_EN Compact pumps Series EBP, LD/S, ME - Overview of products - Executions - Materials - Types of seals - Sectional and dimensional drawings EBP 25-160 in bronze execution General
More informationInline pumps Series INP
Series informationen INP_02_EN Inline pumps - Overview of products - Executions - Materials - Types of seals - Dimensional drawings General Description The centrifugal pumps series INP are single stage,
More informationClose-coupled pumps Series ES04
Close-coupled pumps Series ES04 www.andritz.com/pumps General Description / Application Pumps of series ES04 are extremely compact units which require very little space. They are particularly suitable
More informationSIHI SuperNova. Volute casing pumps. Type ZLIC TECHNICAL DATA. 0B, 0C, 4B max. 120 C Casing pressure: PN 16 / PN 10 1)
Volute casing pumps SIHI SuperNova Type ZLIC 040160... 200 TECHNICAL DATA Output: Head: Speed: Material: Temperature: max. 330 m³/h max. 60 m max. 3600 rpm grey cast iron: 0B, 0C material design: 0B, 0C,
More informationVERTICAL IN-LINE PUMP
VERTICAL IN-LINE PUMP TECHNICAL FEATURES ELINE: Vertical centrifugal pumps, single impeller, volute casing, non-self priming pump, in-line executive, with mechanical seal. Hydraulically designed in line
More informationCompany name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 13/03/2017
Position Qty. Description 1 NB 1-31/29 A-F2-B-E-BAQE Phone: 4 84 61 Date: 13/3/217 Product No.: On request Non-self-priming, single-stage, centrifugal volute pump designed according to ISO 199 with dimensions
More informationLowara. Centrifugal Electric Pumps Manufactured in AISI 316 Stainless Steel in Compliance with EN 733. SH Series. 60 Hz
Centrifugal Electric Pumps Manufactured in AISI 316 Stainless Steel in Compliance with EN 733 SH Series 60 Hz SERIE SH HYDRAULIC PERFORMANCE RANGE AT 60 Hz WEB 10-2006 2 CONTENTS 5 Specifications... 6
More informationCasing. Impeller. Gland. Shaft. Bearing Bracket. Support Foot RANGE APPLICATIONS
Casing Impeller Gland Shaft Bearing Bracket Support Foot RANGE APPLICATIONS Delivery size : up to 150 mm Capacity Head 3 : up to 550 m /hr : up to 100 metres Circulation of water in industries, Air-conditioning
More informationSide channel pumps PN 16 SOH - SOHB. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB Technical description Operating data Design Industries Media pumped: Nominal diameter: 1-1 1 /2 Flow rate: 0.3-7.5 m 3 /h Pump head: 5-155
More informationLowara. Centrifugal electric pumps made of AISI 316 stainless steel in compliance with EN 733. SH Series. 50 Hz
Centrifugal electric pumps made of AISI 316 stainless steel in compliance with EN 733 SH Series 50 Hz SERIE SH OPERATING CHARACTERISTICS AT 50 Hz PRINT 05-2007 2 CONTENTS 5 Specifications......................................................................
More informationSide channel pumps ADH/CDH AEH TECHNICAL DATA. Temperature: max. 120 C. PN 40 for AEH
Side channel pumps ADH/CDH 0801... 2504 AEH 0805... 0808 TECHNICAL DATA Capacity: Head: Speed: max. 7,2 m³/h max. 400 m max. 3000 rpm Temperature: max. 120 C Casing pressure: Shaft sealing: PN 25 for ADH/CDH
More informationSide channel pumps PN 16 SOH - SOHB - SOHM. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB - SOHM Technical description ATEX certified The SOH side channel pump models are available in a variety of designs. Design base plate
More informationTDB - TDV Series TBD 22, 35, 58, 78, 120, 170 TDV 120, 170, 220, 280
50 Hz TDB - TDV Series TBD 22, 35, 58, 78, 120, 170 TDV 120, 170, 220, 280 VERTICAL MULTISTAGE ELECTRIC PUMPS EQUIPPED WITH IE2 MOTORS COMPLYING WITH REGULATION (EC) no. 640/2009 Cod. 191002201 Rev ev.a.a
More informationSMN Double-Suction Axially Split Pump
SMN Double-Suction xially Split Pump motralec 4 rue Lavoisier. Z Lavoisier. 95223 HERBLY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48 Demande de prix / e-mail : service-commercial@motralec.com www.motralec.com
More informationSubmersible Long Shaft Pumps for the Chemical Industry Type NCT/NMT
Submersible Long Shaft Pumps for the Chemical Industry Type NCT/NMT General The DICKOW submersible pump, type NCT, for the chemical industry is a vertical pump with separate discharge pipe. The maximum
More informationSIHI multi. Modular multistage pumps. Type MSL, MSM. Description. Construction. Applications. Technical Data. Options
Modular multistage pumps SIHI multi Type MSL, MSM Description SIHI multi pumps are horizontal multistage centrifugal pumps of ring-section design, which meet the technical requirements of ISO 5199 / EN
More informationHigh-pressure pumps Series HP45
High-pressure pumps Series HP45 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water
More informationXFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump
XFLO P U M P S XS SERIES Single Stage Double Suction Split Casing Centrifugal Pump General and Construction 1. Applications Waterworks, Irrigation, Drainage pumping stations, Power stations, Industrial
More informationHigh-pressure pumps Series HP49
High-pressure pumps Series HP49 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water
More informationRWCP, RWCN. Vertical pumps for tanks for loaded liquids. 1. Fields of Application. 3. Design. 4. Designation. 2. Operating Data
Type series booklet CTI-4900/01 [04-2012] RWCP, RWCN Vertical pumps for tanks for loaded liquids 1. Fields of Application RWCP and RWCN are vertical, centrifugal pumps designed for wells, ditches and tanks.
More informationVolute pumps for hot water up to 230 C
Volute pumps for hot water up to 230 C SIHI SuperNova ZEND 031125... 125250 TECHNICAL DATA Output: Delivery head: Speed: max. 600 m³/h max. 90 m max. 3600 rpm Temperature: max. 230 C (1) Casing pressure:
More informationBEV. Deep well vertical pumps. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data
Type series booklet CTI-2000/00 [09-2010] BEV Deep well vertical pumps 1. Fields of Application BEV are vertical multistage centrifugal pumps designed for deep well, ditches and tanks to pump clean liquids
More informationG&L Series MPVN. High Pressure Multi-Stage Pumps. Goulds Pumps. ITT Industries
G&L Series MPVN High Pressure Multi-Stage Pumps www.goulds.com Goulds Pumps ITT Industries A Full Range of Product Features Performance Range: Capacities up to GPM ( m /h) Head up to feet ( m) Maximum
More informationData sheet: Wilo-Multivert MVI 205 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 5 (3~4 V, EPDM, PN 16) Pump curves 4 Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 17 Max. ambient temperature T 4 C P [kw] NPSH [m] H[m] 14 16 14 1 1
More informationData sheet: Wilo-Multivert MVI 805 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 8 (~ V, EPDM, PN ) Pump curves 89 8 Wilo-Multivert-MVI 8-89 Hz Power Fluid temperature T -...+ C NPSH [m] H[m] 8 8 8 8 88 8 8 8 8 8 8 8 8 η p NPSH 8 8 [l/s] 89 η p [%] Max.
More informationData sheet: Wilo-Multivert MVI 404 (1~230 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI (1~3 V, EPDM, PN 16) Pump curves Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 16 Max. ambient temperature T C 1 1 Maximum operating pressure p max 16
More informationNon-clogging Pump DBS TECHNICAL DATA. Output: up to 1200 m 3 /h. depending of the pump size and material execution
Non-clogging Pump DBS 3216...30040 TECHNICAL DATA Output: up to 1200 m 3 /h Delivery head: up to 100 m Speed: Medium temperature: max. 110 C Casing pressure: Shaft sealing: up to 3600 rpm depending of
More informationSewage transport Submersible pumps
Series description Wilo-Rexa FIT Available from January 2012 Construction Submersible sewage pump with cast iron hydraulics and stainless steel motor Type key Example: Wilo Rexa FIT V06DA-110/EAD1-2-T0015-540-A
More informationJansen Pompentechniek T: +31(0) E:
1 1 VOGEL - Pumps with Channel Type Impeller, Design KS Capacity up to 500 m 3 /h (2200 USgpm) Head up to 45 m (150 feet) Speed up to 1450 min -1 (1450 r.p.m.) Sizes: DN 65 up to DN 150 (21/2 up to 6 )
More informationData sheet. Customer item no.: Communication dated: Number: ES Doc. no.: Item no.: 100 Quantity: 1 Date: 19/03/2015 Page: 1 / 6
Data sheet Item no.: Page: 1 / 6 Operating data Operating data determined for maximum inlet pressure Pumped medium Water Clean water Not containing chemical and mechanical substances which affect the materials
More informationTechnical data 50 & 60 Hz. Vertical centrifugal pumps Series: DPLHS
Technical data 50 & 60 Hz Vertical centrifugal pumps Series: DPLHS 2 Table of Contents 1 Pump introduction 1.1 General... 4 1.2 Model key... 4 1.3 Description of the product... 4 1.4 Operation... 5 1.5
More informationGIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN
GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN Goulds Water Technology is renowned for manufacturing the highest quality pumping equipment utilizing the best engineering practices available worldwide.
More informationSingle-stage centrifugal pumps to standards en 733 (nfe 44111) and iso 5199 Industry Agriculture - Heating
OPERATING LIMITS Flow up to : m /h Head up to : mce Service pressure up to : Jusqu à bar* Temperature range : - à +7 C hot water up to : + C * depending on model NOLH Single-stage centrifugal pumps to
More informationMultistage Pumps. Vogel Series P, PVa, MP 300
Multistage Pumps Vogel Series P, PVa, MP 300 Technical Data Performance range: m Capacities up to 1800m 3 /h (8800USgpm) m Head up to 300m (1000feet) m Max. speed up to 1750rpm Multistage pumps of series
More informationARI-STOBU PN16-40 Stuffing box valve Stop valve with gland seal metal seat
ARI-STOBU PN16-40 Stuffing box valve Stop valve with gland seal metal seat Straight through with flanges TRB 801 Annex II No. 45 (except EN-JL1040) (optional) Straight through with flanges TRB 801 Annex
More informationSide channel pump PN 40 SRZ. self-priming, according to DIN EN 734. Technical description
Side channel pump PN 0 self-priming, according to DIN EN 7 SRZ Technical description SRZ pumps are self-priming side channel pumps in multistage construction capable of handling aerated liquids. They have
More informationINDUSTRY APPLICATION. S -pumps are used in: Industry Waste treatment Environment protection Construction industry Civil engineering
INDUSTRY APPLICATION Self-priming centrifugal pumps of type S are used for pumping clean and contaminated liquids containing solids. The special design makes them suitable also for abrasive liquids. S
More informationData sheet: Wilo-CronoNorm-NL 150/315-37/4
Data sheet: Wilo-CronoNorm-NL 15/315-37/4 Pump curves 4 8 1 16 4Q/US gpm H/m Wilo-CronoNorm-NL 15/315 H/ft 145 1/min 14 5 Hz 4 55% 6% 65% 7% 75% 78% 8% 1 8% 35 Eff. 84,8% 83,9% 3 8% 1 8% 8,1% 78% 8,8%
More informationVolute pumps for hot water up to 207 C
Volute pumps for hot water up to 207 C SIHI SuperNova ZDND 032160... 250 TECHNICAL DATA Output: Delivery head: Speed: max. 600 m³/h max. 90 m max. 3600 Temperature: max. 207 C Casing pressure: PN 25 Shaft
More informationCast iron Nodular iron BR 006/306 Page 2. BR 006/306 Page 2. Forged steel BR 006 Page 3. Stainless steel BR 006 Page 3. Forged steel BR 005 Page 5
ARI-STOBU - Stop valve with gland seal STOBU Stop valve with gland seal ARI-STOBU Globe valve with flanges TRB 801 No.45 (except cast iron) ARI-STOBU Globe valve with flanges TRB 801 No.45 Test approvals
More informationVolute pumps for heat carrier oils up to 350 C. SIHI SuperNova ZTND TECHNICAL DATA. Temperature: max. 350 C Casing pressure: PN 16
Volute pumps for heat carrier oils up to 350 C SIHI SuperNova ZTND 032-125... 200-500 TECHNICAL DATA Output: Delivery head: Speed: max. 0 m³/h max. 95 m max. 3600 rpm Temperature: max. 350 C Casing pressure:
More informationGrey Water and Condensate Pump. Rotex. Type Series Booklet
Rotex Type Series Booklet Legal information/copyright Type Series Booklet Rotex Original operating manual All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
More informationGENERAL INFORMATION THE BUSINESS STRATEGY IS CONCENTRATED ON: THE PRODUCT RANGE CONTAINS PUMPS FOR:
GENERAL INFORMATION SIVAG Pumpen Ges.m.b.H. is primarily concerned with manufacturing and distributing of pumps for many years. Basically the products are used for industrial purposes. Since 1989 the head
More informationMTB /183 A-F-A-BQQV 400D-2 11kW
GRUNDFOS DATA BOOKLET MTB 65-2/13 A-F-A-BQQV D-2 11kW Grundfos Pump 965751 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/mtb/965751/mtb-65-2-13-a-f-a-bqqv.html
More informationTECHNICAL BROCHURE BMPVN MPVN HIGH PRESSURE MULTI-STAGE PUMPS
TECHNICAL BROCHURE BMPVN MPVN HIGH PRESSURE MULTI-STAGE PUMPS A FULL RANGE OF PRODUCT FEATURES Performance Range: Capacities up to GPM ( m /h) Head up to feet ( m) Maximum speed up to RPM Sizes: From "
More informationData sheet. Omega B GB G F Version no.: 1. Operating data. Design. Driver, accessories. Clean water. Actual developed head 57.
Data sheet Item no.: 3700 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 415.38 m ³/h Clean water Actual developed head 57.81 m Not containing chemical and Efficiency 82.3 % mechanical
More informationCast iron Nodular iron Cast steel BR 003/303 Page 2. Cast iron Nodular iron Cast steel BR 004/304 Page 3. Forget steel BR 030 Page 4
Check valve Straight through with flanges (except GG-25) Cast iron Nodular iron Cast steel BR 003/303 Page 2 Straight through with flanges Forged steel BR 003 Page 2 BR 003 Straight through with flanges
More informationARI-STOBU PN16-40 Stuffing box valve
Stuffing box valve Stop valve with gland seal - metallic sealing Straight through with flanges TRB 801 Annex II No. 45 (except EN-JL1040) German TA-Luft TÜV-Test-No. 922-9204866 Grey cast iron SG iron
More informationTechnical Data 50 Hz. Vertical centrifugal pumps Series: DPVE / DPV(S) / DPVCF / DPLHS
Technical Data 50 Hz Vertical centrifugal pumps Series: DPVE / DPV(S) / DPVCF / DPLHS DPVE DPV(S) DPVCF DPLHS Table of Contents 1 Pump introduction 1.1 General... 5 1.2 Model key... 5 1.3 Description of
More informationFH SERIES HYDRAULIC PERFORMANCE RANGE AT 50 Hz
50 Hz FH Series CENTRIFUGAL ELECTRIC PUMPS MANUFACTURED TO STANDARD EN 733 EQUIPPED WITH IE2 MOTORS COMPLYING WITH REGULATION (EC) no. 640/2009 Cod. 191002441 Rev ev.a.a Ed.11/2011 FH SERIES HYDRAULIC
More informationType ZEND. SIHI Model: ZEND / ZDND / ZHND Hot Water Transfer Pumps Product Reference Manual. Experience In Motion. FPD-xxxx
Type ZEND SIHI Model: ZEND / ZDND / ZHND Hot Water Transfer Pumps Product Reference Manual FPD-xxxx Experience In Motion Volute pumps for hot water up to 230 C SIHI SuperNova ZEND 031125... 125250 TECHNICAL
More informationContents. Identification
Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions
More informationCentrifugal electric pumps made of AISI 316 stainless steel in compliance with EN 733. SH Series
Centrifugal electric pumps made of AISI 316 stainless steel in compliance with EN 733 MARKET SECTORS The Lowara SH series pumps are used for water and clean liquid circulation in heating, ventilating and
More informationDWK.E D.R
GRUNDFOS DATA BOOKLET DWK.E.1.15.55.5.1D.R Grundfos Pump 96922755 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/dwk/96922755/dwk-e-1-15-55-5-1d-r.html
More informationVertical multistage centrifugal pumps in ring-section design
Vertical multistage centrifugal pumps in ring-section design Vertical multistage centrifugal pumps in ring-section design PUMP DESIGN Multistage centrifugal pumps in ring-section design, radially split,
More informationJUNG PUMPEN US SUBMERSIBLE DRAINAGE PUMPS
APPLICATION The centrifugal submersible drainage pumps US 62-251 can be used wherever sewage water with solids up to 10 mm particle size occurs, e.g. in collecting sumps for ground water, or in permanent
More informationILN, ILNC. In Line vertical pumps. ILN single suction ILN double suction ILNC. 1. Fields of Application. 3. Design. 4. Designation. 2.
Type series booklet CTI-2600/04 [04-2017] ILN, ILNC In Line vertical pumps ILN single suction ILN double suction ILNC sizes 65/ to 250/... sizes 300/ all sizes 1. Fields of Application Suitable for a wide
More informationCR10-07 A-FJ-A-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CR1-7 A-FJ-A-E-HQQE 3x4D 5 HZ Grundfos Pump 9651216 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/9651216/cr-1-7-a-fj-a-e-hqqe.html
More informationPTB GLV. Vertical Centrifugal Pump
Vertical Centrifugal Pump GLV Application Vertical centrifugal pumps, approved in design and certified, are applied as tank installation pumps in areas with explosion hazard. Equipped with special safety
More information10 mm free passage. Submersible drainage pumps US Application. Safe to run dry. Easy to maintain with guide rail system. 10 mm free passage
Submersible drainage pumps US 6-5 0 mm free passage Application The submersible drainage pumps US 6-5 can be used wherever sewage water with solids up to 0 mm particle size occurs, e.g. in collection sumps
More informationVM Series Vertical Multistage Pumps. VM Series Multistage Pumps APPLICATIONS WHY CHOOSE THE VM SERIES MULTISTAGE PUMPS? Experts in water.
Experts in water. APPLICATIONS Pumping of clean, non-aggressive liquids, free of fibres in suspension, suitable for applications such as:- Water supply - domestic, rural & industrial Pressure boosting
More informationEVM. VERTICAL MULTISTAGE ELECTRIC PUMPS in cast iron, AISI 304, AISI 316. Your Life, our Quality. Worldwide. 36 Commercial
Vertical multistage centrifugal electric pumps available in various versions: cast iron (G), AISI 304 stainless steel (), AISI 316 stainless steel (L). APPLICATIONS Civil, industrial, agricultural and
More informationJUNG PUMPEN COMPLI 100 MC SEWAGE LIFTING STATIONS
APPLICATION The sewage lifting stations compli 100, compli 500 and compli 1000 with MultiCut cutting system are uses especially for disposal in special objects, such as weekend cottages, houseboats, toilets
More informationWaste Water, Condensate and Heat Transfer Fluid Pump. Type Series Booklet
Waste Water, Condensate and Heat Transfer Fluid Pump Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied,
More informationSVI SERIES HYDRAULIC PERFORMANCE RANGE AT 50 Hz
50 Hz SVI Series 2, 4, 8, 16, 33, 46, 66, 92 SUBMERSIBLE VERTICAL ELECTRIC PUMPS EQUIPPED WITH IE2 MOTORS COMPLYING WITH REGULATION (EC) no. 640/2009 Cod. 191002451 Rev ev.a.a Ed.01/2012 SVI SERIES HYDRAULIC
More informationSeries description: Wilo-Drain TM/TMW/TMR 32
Series description: Wilo-Drain TM/TMW/TMR 32 H[m] 10 Wilo-Drain TM /TMR /TMW 32 8 6 TM 32/7 4 TM 32/8 TMW 32/8 2 TMW 32/11 TMR 32/8 TMR 32/11 0 0 2 4 6 8 10 12 Q[m³/h] Design Basement drainage pump, water-cooled
More informationSide Channel Pumps Self-priming, segmental type
Side Channel Pumps Self-priming, segmental type AKH 1101 6103 Technical data Capacity: from 0,2 up to 35 m³/h Head: from 6 up to 144 m Speed: 1450 rpm (max. 1800 rpm) Temperature: max. 120 C Casing pressure:
More informationMultistage Pumps MP, MPA, MPB, MPV SIZES DN 40 - DN 125. Jansen Pompentechniek T: +31(0) E:
Multistage Pumps MP, MPA, MPB, MPV SIZES DN 40 - DN 125 Technical Data Performance range: m Capacities up to 340m 3 /h (1500USgpm) m Head up to 500m (1640feet) m Max. speed up to 3600rpm Multistage pumps
More informationVOGEL - Sewage Pumps Design KS, Channel Type Pumps Design W, WTS, Vortex Type Pumps
VOGEL - Sewage Pumps Design KS, Channel Type Pumps Design W, WTS, Vortex Type Pumps VOGEL - Pumps with Channel Type Impeller, Design KS Capacity up to 500 m 3 /h (2200 USgpm) Head up to 45 m (150 feet)
More informationCENTRIFUGAL PUMPS according to DIN standard
CENTRIFUGAL PUMPS according to DIN 2255 standard End suction centrifugal pumps in accordance with DIN 2255 made of cast iron, applications in water boosting, heating system, airconditioning, washing systems
More informationGeneral Catalog. A New Vision for Quality Pumps. General Catalog
General Catalog A New Vision for Quality Pumps General Catalog 2 Tru20 is committed to only the highest quality pumping products. We produce a tremendous range of water and process pumps in order to serve
More informationCompany name: GSI Created by: Xiao Ying Wong Phone: Date: 10/03/2017 Client: Client Number: Contact:
Position Qty. Description 2 NBG 125-8-16/156 A-F2-A-BAQE Product No.: On request Non-self-priming, single-stage, centrifugal volute pump designed according to ISO 5199 with dimensions and rated performance
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 32-250/7.56 203 PERFORMANCE CURVES 32-250/9.26 203 PERFORMANCE CURVES
More informationVolute Casing Centrifugal Pumps PN 16 for heat-transfer liquids Heat-transfer oil up to 350 C Hot water up to183 C
Volute Casing Centrifugal Pumps PN 16 for heat-transfer liquids Heat-transfer oil up to 350 C Hot water up to183 C Series CMIT in inline design Series CMAT with axial inlet ATEX 0 a Series CMAT Series
More informationSEMA Side channel pumps PN 25 (40) Glandless because of magnetic drive
SEMA Side channel pumps PN 25 (40) Glandless because of magnetic drive SEMA-S SEMA-L with reference to DIN EN 734 SEMA-Z with reference to DIN EN 734 SEMA-Block in closed-coupled design for extremely low
More informationMaterials: Parts of the pump in contact with the liquid are manufactured from the following standard
Plastic Centrifugal Pump For Chemical Process DIN EN 22858 (ISO 2858)Standard DESCRIPTION pumps are manufactured to DIN EN 22858 (ISO 2858) standards in respect of design, performance and dimensions. They
More informationDRD - DRS - DRF. SUBMERSIBLE ELECTRIC PUMPS FOR SEWAGE in cast iron
DRD Cast iron submersible electric pumps for sewage with impeller with several channels APPLICATIONS Moving sewage, foul liquids in general Emptying seepage water Emptying cesspits Draining excavations
More informationNB /193 A-F2-A-BAQE
GRUNDFOS DATA BOOKLET NB100-200/193 A-F2-A-BAQE Grundfos Pump 98305367 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nb000/98305367/nb-100-200-193-a-f2-a-e-baqe.html
More informationGRUNDFOS DATA BOOKLET AP, KP. Wastwater pumps 50 Hz
GRUNDFOS DATA BOOKLET AP, KP Wastwater pumps 5 z Contents General data Performance range Page 3 Applications Page 5 Examples of application Page 5 Pump overview Page 6 Type key for AP pumps Page 6 Type
More informationVolute pumps for heat carrier oils up to 350 C SIHI SuperNova ZTND 032-125... -500 TECHNICAL DATA Output: max. 0 m³/h Delivery head: max. 95 m Speed: max. 3600 rpm Temperature: max. 350 C Casing pressure:
More informationPA SERIES END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 THONG FATT JAYA MACHINERY HARDWARE SDN. BHD.
END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 50HZ OR 60HZ PA SERIES APPLICATIONS PA Series pumps can be used for the following services in commercial, residential, agriculture, industrial,
More informationSUBMERSIBLE PUMP RANGE
SUBMERSIBLE PUMP RANGE www.vegapumps.co.za INDEX VXM / VX SUBMERSIBLE PUMP... 4 PERFORMANCE DATA... 5 V RANGE SCREENED SWAGE SUBMERSIBLE PUMP... 6 PERFORMANCE DATA... 7 DIMENSIONAL DRAWING... 9 C-SERIES
More informationSDL i MACERATING SUBMERSIBLE PUMPS
OPERATING LIMITS Flow up to: 6 m 3 /h Head up to: 36 m Max. particle size: 6 mm DN of discharge port: Protection index: 68 SDL i MACERATING SUBMERSIBLE PUMPS Lifting of waste water Commercial pole - 5
More informationJUNG PUMPEN compli 100 MC Sewage lifting stations
Application The sewage lifting stations compli 100, compli 500 and compli 1000 with MultiCut cutting system are uses especially for disposal in special objects, such as weekend cottages, houseboats, toilets
More informationCRE10-12 AN-FJ-A-E-HQQE 3x HZ
GRUNDFOS DATA BOOKLET CRE1-12 AN-FJ-A-E-HQQE 3x3-5 6 HZ Grundfos Pump 997179 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cre1/997179/cre-1-12-an-fj-a-e-hqqe.html
More informationSelf-Priming Pumps. Characteristic curves for suction lift Hs = 1 m. n 2900 rpm. H m. H m 50 Q 3
www.calpeda-romania.ro 7..9 www.pompe-calpeda.ro 7.79. Construction Close-coupled self-priming shallow well jet pumps with built-in ejector. NG: version with pump casing and lanter bracket in cast iron.
More informationIN-LINE ELECTRIC PUMPS SINGLE AND TWIN. 50 Hz FC-FCT SERIES
IN-LINE ELECTRIC PUMPS SINGLE AND TWIN 50 Hz FC-FCT SERIES EDITION 03-2006 INDEX FC Series Specifications... 3 FC Series Construction Characteristics... 4 FCT Series Specifications... 5 FCT Series Construction
More informationINVCP, INVCN. Vertical pumps for tanks. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data
Type series booklet CTI-0300/03 [05-2012] INVCP, INVCN Vertical pumps for tanks 1. Fields of Application INVCP pumps are used for organic and inorganic liquids in water services and different industries.
More informationData sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m
Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency
More informationCompany name: GRUNDFOS (Singapore) Pte. Ltd. Created by: Angie Ang Phone: Date: 23/03/2017
Position Qty. Description 1 CR 15-7 A-F-A-E-HQQE Date: 3/3/17 Product No.: On request Note! Product picture may differ from actual product Liquid: Pumped liquid: Water Liquid temperature range: -.. 1 C
More informationSF6. EBARA PUMPS EUROPE S.p.A. SUBMERSIBLE PUMPS. Page - CONTENTS 100
SPECIFICATIONS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CHART R10 204 PERFORMANCE CHART R13 205 PERFORMANCE CHART S25 206 PERFORMANCE
More informationWaste Water, Condensate and Heat Transfer Liquid Pump. Type Series Booklet
Waste Water, Condensate and Heat Transfer Liquid Pump MK Type Series Booklet Legal information/copyright Type Series Booklet MK All rights reserved. The contents provided herein must neither be distributed,
More informationS4G Series. Technical Guide. 4 submersible pumps
SG Series Technical Guide submersible pumps SG Series t Index Sectors of application... Technical characteristics SG... 5 Table of materials and identification data... 6 Nominal data... Hydraulic performance
More informationCHECK VALVES. MOUNTING: - flow direction marked with arrow on body; - mounting position in conformity with the technical sheet recommendation.
CHECK VALVES RR page 1 R MAIN APPLICATIONS: Transport and distribution of : - cold and hot industrial water; - saturated vapours; - petroleum products; on condition that the compatibility regarding the
More informationSide Channel Pumps Self-priming, segmental type with verly low NPSH
Side Channel Pumps Self-priming, segmental type with verly low NPSH CEH Sizes 1201 6108, 1202/5 6108/5, 1202/7 6107/7 Technical data Capacity: Delivery head: Speed: max. 35 m³/h max. 354 m max. 1800 1/min
More informationSIHI multi Type MSC. Modular multistage pumps. Description. Construction. Applications. Optional special designs. Materials.
Modular multistage pumps SIHI multi Type MSC Description The SIHI multi MSC range of horizontal, ring-section multistage pumps have been designed for long-term reliability when pumping high pressure liquids.
More informationOVERVIEW Submersible dredging pumps
OVERVIEW Submersible dredging pumps Coupling discharge side Capacity max Pressure max m wc Version Power Pump name Page output KW 2" 25 3 x V 2, KTV2-5 1 3" 3 22 3 x V 3,9 KTV2-2 3" 1 15,5 3 x V 5,2 KRS2-3
More informationSeries description: Wilo-MultiCargo MC
1 88 / Series description: -MultiCargo MC 5 -MultiCargo MC 3../.. 3 1 MC 35 MC 3 MC 5 MC Design Self-priming multistage centrifugal pumps Application Water supply Sprinkling Irrigation and spraying utilisation
More information