Schedule 80 CPVC Industrial Products & Accessories True Union 2000 Industrial Ball Check Valves
|
|
|
- Emil Riley
- 6 years ago
- Views:
Transcription
1 Schedule 0 Industrial Products & Accessories True Union 000 Industrial Ball Check Valves Pressure 7 F ( C), Water /" - " 5 psi " - " 50 psi All Flanged 50 psi = 00 F (9 C) Rated for Vacuum Service All Valves assembled with Silicone-Free, Water Soluble Lubricant Contact Spears for Pricing & Availability on Custom Elastomer Seals See Ball Valve Accessories & Repair Kits Section for Additional Options and Features Socket Style General Installation Information: Ball check valves may be installed in either horizontal or vertical position. A minimum of ten (0) pipe diameters' distance maintained from any pump or other source of turbulence. Check valves MUST be installed with the valve's FLOW arrow pointing in the direction of flow. Industrial Socket & Threaded Ends C C / C C / C 59-00C C 59-0C -/ C 59-05C -/ C 59-00C Socket Ends 5-05C 5-05C -/ C 5-00C C 5-00C C 5-00C C 5-00C " Venturied valves are " ball check valves fitted with x end connector adapters. Threaded Ends 5-05C 5-05C -/ C 5-00C C 5-00C C 5-00C SR Threaded Ends 5-005CSR 5-005CSR / CSR 5-007CSR / CSR 5-00CSR CSR 5-0CSR -/ CSR 5-05CSR -/ CSR 5-00CSR CSR 5-05CSR -/ CSR 5-00CSR CSR 5-00CSR CSR 5-00CSR Industrial Spigot Ends / / -/ -/ -/ Flanged Ends / C C C C C C C C C C C C C C C C C C C C C 5-005C C 5-007C / C 5-00C C 5-0C -/ C 5-05C -/ C 5-00C C 5-05C -/ C 5-00C C 5-00C C 5-00C C 5-00C " Venturied valves are " ball check valves fitted with x end connector adapters. Made in the U.S.A. NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Page
2 Schedule 0 Industrial Products & Accessories True Union Ball Check Valves (Regular Style) & Foot Valve Screens True Union Ball Check Valves (Regular Style) Socket/Threaded Style Pressure 7 F ( C), Water /" - " 5 psi -/" - " 50 psi Flanged 50 psi = 00 F (9 C) Rated for Vacuum Service All Valves assembled with Silicone-Free, Water Soluble Lubricant " Venturied Valves are " Ball Check Valves equipped with x End Connectors. General Installation Information: Ball check valves may be installed in either horizontal or vertical position. A minimum of ten (0) pipe diameters' distance maintained from any pump or other source of turbulence. Check valves MUST be installed with the valve's FLOW arrow pointing in the direction of flow. Socket & Threaded Ends 9-005C 9-005C / C 9-007C / C 9-00C C 9-0C -/ C 9-05C -/ C 9-00C Socket Ends -05C -05C -/ C -00C Socket Venturied Ends VENTURIED Threaded Ends -/ -00C.7-00C C C C.7-00C C C C C Flanged Ends -005C -005C / C -007C / C -00C C -0C -/ C -05C -/ C -00C C -05C -/ C -00C C -00C Flanged Venturied Ends VENTURIED -00C C Foot Valve Screens Convert Check Valve to Foot Valve using adapter - Fits all Socket Ball Check Valves or any IPS fitting socket Foot Valve Screens-Spigot Size Ctn Price Each FVS-005C / FVS-007C / FVS-00C FVS-0C -/ FVS-05C -/ FVS-00C FVS-05C -/ Foot Valve Screens-Spigot (continued) Size Ctn Price Each FVS-00C FVS-00C FVS-00C Page 5 NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Spears Manufacturing Company
3 Schedule 0 Industrial Products & Accessories Y-Check Valves Pressure 7 F ( C), Water /" - " 50 psi " - " 90 psi = 00 F (9 C) True Union Style - Socket Ends -005C -005C / C -007C / C -00C C -0C -/ C -05C -/ C -00C C -00C C -00C SR Threaded Ends / / -/ -/ -005CSR CSR.77-00CSR CSR.09-05CSR CSR CSR CSR CSR.9-007CSR CSR 7.9-0CSR CSR CSR CSR CSR Flanged Ends / / -/ -/ -005C C.05-00C 9. -0C. -05C C C C C C C.9-0C C C C C.97 - True Union Socket Ends / A-005C.55 A-005C True Union Socket Ends (continued) A-007C A-007C /. 5.9 A-00C A-00C.7 0. A-0C A-0C -/ A-05C A-05C -/ A-00C A-00C.75.0 A-00C A-00C A-00C A-00C True Union Threaded Ends B-005C B-005C / B-007C B-007C /. 5.9 B-00C B-00C.7 0. B-0C B-0C -/ B-05C B-05C -/ B-00C B-00C.75.0 B-00C B-00C B-00C B-00C True Union SR Threaded Ends / / -/ -/ B-005CSR.77 B-007CSR 5. B-00CSR 70.7 B-0CSR 9.0 B-05CSR 0.5 B-00CSR 70.5 B-00CSR B-00CSR B-005CSR 5. B-007CSR 70.7 B-00CSR. B-0CSR 9. B-05CSR 0. B-00CSR B-00CSR. B-00CSR Made in the U.S.A. NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Page
4 Schedule 0 Industrial Products & Accessories Butterfly Check Valves Wafer Flanged Spigot Threaded Grooved Pressure 7 F ( C), Water " - " 50 psi 0" - " 00 psi " - " 50 psi = 00 F (9 C) Wafer -/ C C C C C C C. 50-0C 7.7 Flanged Ends 5-00C C -/ C C C C C C C C C C C.0 Spigot (Plain End) 57-00C C -/ C C C 55. General Installation Information: Butterfly Check Valve seating may be affected by normal system turbulence. Flow velocities should be limited to approximately 5 feet per second. Valves should be installed at least 5 pipe diameters away from any fitting, pump or other source of turbulence. If used as a foot valve, do not place near bottom of a tank. Butterfly type check valves should not be used in continuous cycling applications, such as with reciprocating pumps. This can result in premature failure of sealing membrane. In horizontal installations, always orient the Hinge Post Bolts visible on the external body in a vertical (top and bottom) position, perpendicular to flow. In vertical installations downstream from an elbow, flow velocities can be higher on the outer radius of the elbow. To avoid uneven butterfly plate loading, the Hinge Post Bolts should align with crotch and outer radius of elbow and NOT from side to side of the elbow C C C C C C C C. 5-00C C C C C C C C C C C C C C C C C C (continued) Spigot (Plain End) 57-00C 57-00C C 57-00C C 57-0C C 57-0C C 57-0C C 57-0C C 57-00C C 57-0C Threaded Ends 5A-00C 5A-00C.. 5A-05C 5A-05C -/ A-00C 5A-00C A-00C 5A-00C A-00C 5A-00C A-00C 5A-00C A-00C 5A-00C Grooved Ends -/ 0 5A-0C 95. 5G-00C. 5G-05C 59. 5G-00C G-00C 79. 5G-00C 0.9 5G-00C.0 5G-00C 59. 5G-0C A-0C G-00C 5. 5G-05C 9.0 5G-00C 95. 5G-00C G-00C G-00C 9.9 5G-00C 0. 5G-0C Page 7 NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Spears Manufacturing Company
5 Schedule 0 Industrial Products & Accessories Industrial Swing Check Valves Pressure 7 F ( C), Water /" - " 50 psi " 00 psi " 70 psi = 00 F (9 C) All Valves Assembled with Silicone-Free Lubricants Threaded Bonnet on Sizes /", " & -/" Bolted Bonnet on Sizes -/" & Up (Valve Shown with Arrow Indicator Option) General Installation Information: Swing check valves are designed for horizontal installations, but may be installed in up-flow only vertical position. Check valves MUST be installed with the valve's FLOW arrow pointing in the direction of the flow. Do not install valve upside down. Flow velocity should not exceed 5 ft./sec. Industrial Swing Check Valves -007C -007C / C -00C C -0C -/ C -05C -/ C -00C C -05C -/ C -00C C -00C C -00C C -00C Swing Check Valve With Arrow Indicator / -/ -/ -/ I-007C 7.5 I-00C I-0C.0 I-05C 77.9 I-00C I-05C 9.95 I-00C I-00C I-00C 77. I-00C I-007C.5 I-00C I-0C 5. I-05C 5. I-00C 9.5 I-05C 9. I-00C.7 I-00C 5.59 I-00C 79.5 I-00C 5.9 Swing Check Valve With Counter Balance CB-007C CB-007C / CB-00C CB-00C Swing Check Valve With Counter Balance (continued) -/ -/ -/ CB-0C.0 CB-05C 5.7 CB-00C 9.5 CB-05C 99. CB-00C. CB-00C 00.7 CB-00C 75. CB-00C 5.00 CB-0C 5.7 CB-05C 7.7 CB-00C.7 CB-05C 5.7 CB-00C 9. CB-00C 7. CB-00C 55.0 CB-00C Made in the U.S.A. NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Page
6 Schedule 0 Industrial Products & Accessories Diaphragm Check Valves Pressure 7 F ( C), Water Full Flow (open) 50 psi Back Pressure (closed) 00 psi = 00 F (9 C) Santoprene TPE Seat Diaphragm Check Valves - Socket Size Price Ctn Each 5-007C / Diaphragm Check Valves - Thread Price Size Ctn Each 5-007C / General Installation Information: Diaphragm Check Valves have "normally closed" operation with - -/ psi opening pressure and can be mounted in any position. Check valves MUST be installed with the valve's FLOW arrow pointing in the direction of the flow. Flow velocity should not exceed 5 ft./sec. Page 9 NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Spears Manufacturing Company
Schedule 80 PVC Industrial Products & Accessories True Union 2000 Industrial Ball Check Valves
Schedule 0 Industrial Products & Accessories True Union 000 Industrial Ball Check Valves Pressure Rating @ 7 F ( C), Water /" - " 5 psi " - " 50 psi All Flanged 50 psi = 0 F (0 C) Rated for Vacuum Service
Schedule 80 PVC Industrial Products & Accessories True Union 2000 Industrial Ball Valves
True Union 000 Industrial Ball Valves Pressure Rating @ 7 F ( C), Water /" - " 5 psi " - 8" 50 psi All Flanged 50 psi Socket Style SR Threaded Style " Lever Handle Style PVC = 0 F (0 C) Rated for Vacuum
manual valves inch sizes
Spears True Union 2000 Industrial Vented Ball Valve Description: In-line double union ball valve Maximum Fluid Pressure at 20 C: All sizes 1 /2 to 2-16 bar; sizes 2 1 /2 to 4-10 bar; all sizes flanged
pvc-c manual valves inch sizes manual valves inch sizes Spears True Union 2000 Industrial Ball Valve
pvc-c Spears True Union 2000 Industrial Ball Valve Description: In-line double union ball valve with lockable handle Maximum Fluid Pressure at 20 C: Sizes 1 /2 to 2-16 bar; sizes 2 1 /2 to 6-10 bar All
2010 EDITION PART 2. Butterfly, Gate, Globe, Needle & Diaphragm Valves. Thermoplastic Valves, Strainers & Accessories
PART Thermoplastic Valves, Strainers & Accessories Butterfly, Gate, Globe, Needle & Valves See Spears On-line Catalog for most current pricing, updated daily. P R E V E N T I O N L O S S C E R T I F I
Diaphragm Valves. NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS 1117 Progressive Products from Spears Innovation and Technology
Features, & This full-featured valve is engineered to provide accurate throttling control and shutoff for industrial, chemical and water treatment applications. Weir-type design eliminates entrapped fluids
Lab Ball Valves CPVC. Needle Valves
Lab Ball Valves & Needle Valves Socket/Threaded Valve Only PVC EPDM FKM Valve & Adapters Threaded Ends 1529-002A XT 25.75 1529-002 XT 25.75 Valve only Threaded Ends 1521-002 20.58 1521-003 28.93 Valve
PVC - Socket Ends (True Union Style Uses End Connector O-ring Seals)
Valves Socket/Threaded Style Pressure Rating @ 7 F ( C), Water " - " 5 psi " - " Flanged & Valves w/ptfe 50 psi s " 00 psi " 75 psi Maximum Service Temperature PVC = 0 F (0 C) CPVC = 00 F (9 C) PP = 0
Distributed By Aetna Plastics Pneumatically Actuated Diaphragm Valve DIASTAR Ten and TenPlus General Size: ½ 2 Material: PVC, CP
Pneumatically Actuated Diaphragm Valve DIASTAR Ten and TenPlus General : ½ 2 Material: PVC, CPVC, PROGEF Standard PP, PROGEF Natural PPn, ABS, SYGEF Standard PVDF, SYGEF Plus PVDF-HP Diaphragm: EPDM, FPM,
pvc-u section guide application guide standards and approvals
pvc-u Unplasticised Polyvinyl Chloride (PVC-U) is the most widely used of all plastics used for pipe installations. It is rigid, versatile, and is suitable for both above or below ground installations.
Actuated Valves PRICING
Electric & Pneumatic Actuated Valves Actuated Valves PRICING Page Suitable for Oil-Free air handling to 5 psi, not for distribution of compressed air or gas Spears Manufacturing Company Due to Material
GBV-G Balancing Valves
Ductile Iron ASTM A6, Grade 6-4-2 The Series GBV is a multi-turn, Y-style globe valve designed for accurate determination and control of fluid flow to circuits requiring precise balancing. Max. Working
Filters & Strainers Technical Information TECHNICAL INFORMATION WEIGHTS & DIMENSIONS
Filters & Strainers Technical Information TECHNICAL INFORMATION WEIGHTS & DIMENSIONS Contact Spears for any Information not found. Made in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for
M&H AWWA C508 STANDARD SWING CHECK VALVES
GENERAL M&H AWWA C508 STANDARD SWING CHECK VALVES Style 59-02 plain / 159-Lever & Weight / 259-02 Lever & Spring Sizes 2 Through 36 Water / Sewage Service M&H Swing Check valves are widely specified by
Pressure relief valve DHV 718
Pressure relief valve DHV 78 Benefits diaphragm controlled pressure relief valve with piston guidance simple design, reliable function particularly suitable for oscillating pumps constant, frictionless
SECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section includes valves for building services piping. 1.2 REFERENCES A. AGA Z21.22 (American Gas Association) - Relief Valves
Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True
Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True
Lab Specialty Products Technical Information TECHNICAL INFORMATION WEIGHTS & DIMENSIONS
Lab Specialty Products Technical Information TECHNICL INFORMTION WEIGHTS & DIMENSIONS Contact Spears for any Information not found. Page 569 Lab Ball s Sample Engineering Specification ll thermoplastic
TRU-BLOC TRUE UNION BALL VALVES - PVC
AND CORZAN BALL VALVES, BUTTERFLY VALVES, CHECK VALVES, SPECIALTY VALVES, ACCESSORIES AND REPLACEMENT PARTS CH-VLV-1018 Effective October 1, 2018 Supercedes CH-VLV-0118 dated January 1, 2018 Visit our
SR50 Series Pressure Regulating (Reducing) Valves
PDF Published July 7, SR5 Series Pressure Regulating (Reducing) Valves The Chemline SR 5 Series Pressure Regulating (Reducing) valves maintains a set downstream pressure independent of higher variable
M&H AWWA C508 STANDARD SWING CHECK VALVES
GENERAL M&H AWWA C508 STANDARD SWING CHECK VALVES Style 59-02 plain / 159-Lever & Weight / 259-02 Lever & Spring Sizes 2 Through 36 Water / Sewage Service M&H Swing Check valves are widely specified by
Type 543. Three-way Ball Valve
Three-way Ball Valve Type 543 General Size: ⅜ 2 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM or FPM End Connection: Solvent cement socket, threaded, flanged,
CH-VLV TRU-BLOC /TRU UNION BALL VALVES Valves assembled with silicone free lubricant
PVc and Corzan cpvc ball valves, Butterfly Valves, Check Valves, Specialty Valves, accessories and replacement parts CH-VLV-0912 Effective Sept. 17, 2012 Supercedes CH-VLV-0111 dated January 20, 2011 TRU-BLOC
A. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.
SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing
Valve Selection. 1. Function and service considerations
1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.
CPVC HOT & COLD PLUMBING SYSTEM PRICE LIST
CPVC HOT & COLD PLUMBING SYSTEM PRICE LIST With effect from 1st June, 2015 SDR-11 (3 Mtr. Length) (Rate per mtr.) 15 ½ M011110301 100 75.00 20 ¾ M011110302 50 110.00 25 1 M011110303 30 174.00 32 1¼ M011110304
BALL VALVE ACCESSORIES
True Union 2000 Retrofit Kits Easily converts any system over to all True Union 2000 style valves for consistent valve type and uniform maintenance. Special extended socket style End Connectors (2) allow
VR Piston Check Valves Submittal Data Sheet. Job or Customer: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: introduction
Submittal Data Sheet Job or Customer: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: Date Date Date introduction < STANDARDS > The IPEX VR Piston Check Valve is an ideal solution
Appendix B - Premium Actuated Valve Part Number Selection
The section is provided for formulation of part numbers on custom actuated valve packages. A 3-step process is used to build custom actuated valve part numbers: Step 1 - Select the desired type, style,
Type 375. True Union Ball Valve
True Union Ball Valve Type 3 General Size: ⅜ 4 Material: PVC, CORZAN CPVC, or PPn Seat: PTFE Seals: EPDM or FPM End Connection: Solvent cement socket, threaded, flanged, PPro-Seal electrofusion socket
Iron Check Valves Illustrated Index
Iron Check Valves Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Iron Body Silent Check
Pipe Nipples / Solvent Cement / Pipe Clips 11. Diaphragm Valves / Knife Gate Valves 21
TABLE OF CONTENTS Pipe Sizing 1 Pipe 2 Tee s 3 Elbows 4 Couplings 5 Adaptors, Caps & Plugs 6 Unions 7 Reducer Bushing 8 Wye s / Clamp on Saddles 9 Flanges 10 Pipe Nipples / Solvent Cement / Pipe Clips
2-12 Grooved End Dual Disc Check Valve. Operation, Maintenance and Installation Manual
Manual No. DDCV-OM4-1 2-12 Grooved End Dual Disc Check Valve Operation, Maintenance and Installation Manual INTRODUCTION... 1 RECEIVING AND STORAGE... 1 DESCRIPTION OF OPERATION... 1 INSTALLATION... 2
Installation Operation & Maintenance Instructions
Installation Operation & Maintenance Instructions Contents Please read the installation operation and maintenance instruction prior to using any of our components. Failure to follow the instructions may
MODEL 106/206-PG POWER OPERATED GLOBE VALVE Sizes 1/2" to 8" (106-PG) 3" to 10" (206-PG) Installation, Operating and Maintenance Instructions
MODEL 106/206-PG POWER OPERATED GLOBE VALVE Sizes 1/2" to 8" (106-PG) 3" to 10" (206-PG) Installation, Operating and Maintenance Instructions DESCRIPTION: This valve is the basic component used for most
Hayward Flow Control
New GFPP PMD4/PMS4 Series Pneumatic Actuators Hayward Flow Control Actuation and Controls Price List Effective July 22, 2013 Hayward Flow Control A Division of Hayward Industries, Inc. One Hayward Industrial
Spears Low-Extractable SCHEDULE 80 PIPE
Spears Low-Extractable SCHEDULE 80 PIPE NOMINAL PIPE MAX. W.P. LGTHS/ PART NUMBER AVG. OD AVG. ID MIN. WALL LBS/FT SIZE PSI* CARTONS 1/2" LXT-005.840.528.147 420.202 22 3/4" LXT-007 1.050.724.154 340.273
Compact wafer-style design and round unobstructed port tackle many tough applications.
VLVES & CONTROLS Compact wafer-style design and round unobstructed port tackle many tough applications. Features Minimizes piping support with the compact wafer style body. The Prince wafer check valves
SB12 Series Back Pressure/Relief Valves
PF Published September 7, 4 SB Series Back Pressure/Relief Valves PP PVF SERIES: SB SIZES: 3/8 4 ENS: True Union Socket, Threaded or ChemFlare TM Spigot Bodies with Plain, Socket, Threaded or Flanged ends
TBH SERIES TRUE UNION BALL VALVES
TBH SERIES TBH Series true union ball valves are offered in PVC and CPVC. O-rings are FPM or EPDM and seats are PTFE. All valves are assembled with silicone free lubricant. Price List No. TBH01 BALL VALVES
Rite Sized Check Valves
Rite Sized Check Valves ASME Class 125 2500 1 (25mm) 60 (1500mm) A Bray High Performance Company Ritepro Ritepro Corporation, headquartered in Quebec, Canada and founded in 1963, designs and manufactures
CLASS 400 FORGED BRASS BALL VALVE
CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:
WCV Series Full Pattern Wafer Check Valves 2 TO 8 PVC AND CVPC
WCV Series Full Pattern Wafer Check Valves 2 TO 8 PVC AND CVPC KEY FEATURES Robust Full Pattern Body PVC and CPVC No Special Spacers or Flanges Required High Cv Rating Equal to Metal Check Valves, Saves
SECTION VALVES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections:
FLOW CONTROL. Complete Price Book. Effective August 7, 2017 Updated September 8, QUALITY SERVICE INTEGRITY
Complete Price Book Effective August 7, 2017 Updated September 8, 2017 FLOW CONTROL 17 QUALITY SERVICE INTEGRITY NSF/ANSI Standard 61 NSF/ANSI Standard 61 is a standard defining the requirements for products
Manual Thermoplastic Valves Complete Specification Guide
Manual Thermoplastic Valves Complete Specification Guide Home Products Engineering Data New Products Contact Us July 2, 2005 Products by Category: Chemical Resistance Guide Guide Chlorine Gas Systems Gas
O IL & G AS INDUSTRIAL VALVES, ACTUATORS & ACCESORIES
O IL & G AS O IL & G AS License Number 6D-1724 FORGED STEEL Size Range Ball Valves API 6D / BS EN ISO 17292 Gate Valves Globe Valves API 602 / BS EN ISO 15761 Class 150-2500 / Class 800 ½ - 2 Check Valves
Type 145. Electrically Actuated Wafer Butterfly Valve
Electrically Actuated Wafer Butterfly Valve Type 1 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM Stem: 316
OPERATION MANUAL.25 METALLIC PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM
OPERATION MANUAL.25 METALLIC PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM CAUTIONS - READ FIRST CAUTION: Do not apply compressed air to the exhaust port pump will not function. CAUTION: Do not exceed 79 C (174
HIGH PRESSURE CONTROL VALVE PISTON BALANCED
PISTON BALANCED All Rights Reserved. All contents of this publication including illustrations are believed to be reliable. And while efforts have been made to ensure their accuracy, they are not to be
FLOW CONTROL. Complete Price Book. Canadian Price List Effective October 2, QUALITY SERVICE INTEGRITY
Complete Price Book Canadian Price List Effective October 2, 2017 FLOW CONTROL 17 QUALITY SERVICE INTEGRITY NSF/ANSI Standard 61 NSF/ANSI Standard 61 is a standard defining the requirements for products
Type 514, 515, 517, 519
Diaphragm Valve Type 514, 5, 517, 519 General : ½ 2 Material: PVC, CPVC, PROGEF Standard PP, PROGEF Natural PPn, ABS, SYGEF Standard PVDF, SYGEF Plus PVDF-HP Diaphragm: EPDM, FPM, NBR, PTFE/EPDM, PTFE/FPM,
14 and Larger Wafer and Lug Style Dual Disc Check Valve. Operation, Maintenance and Installation Manual
Manual No. DDCV-OM2-2 14 and Larger Wafer and Lug Style Dual Disc Check Valve Operation, Maintenance and Installation Manual INTRODUCTION... 1 RECEIVING AND STORAGE... 1 DESCRIPTION OF OPERATION... 1 INSTALLATION...
LATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
CIRCUIT BALANCING VALVES. MODEL NUMBER ITEM NUMBER QTY PER CARTON LIST PRICE EACH Wt (lbs.) EACH 0.75 CBV-3/4MS $ 73.
FILE NO.: USPL0.000 DATE: February, 00 SUPERSEDES: USPL0.000 DATE: June 8, 00 CIRCUIT BALANCING VALVES MODEL NUMBER ITEM NUMBER QTY PER CARTON LIST PRICE EACH Wt (lbs.) EACH MINI-SWEAT CBV-/MS 009-0 $.00
Wafer Butterfly Valves
Page 126 Wafer Butterfly Valves Wafer valve lever Ductile iron disc 21/ * * * 97495 97496 97497 97501 97502 97503 97504 97505 97506 8.6 9.0 11.5 12.9 17.0 32.4 48.0 76.0 55.00 58.00 63.00 85.00 110.00
General Price List Main effective MAY 13, General Price List. Main
General Price List The Victaulic website is an information resource that can help you with your piping projects. Among the many resources available at the site: Fully searchable product and project databases
DEMCO Resilient-Seated Butterfly Valve
Document Number: TC003001-01 Revision: Rev 2 DEMCO Resilient-Seated Butterfly Valve Installation, Operation, and Maintenance Manual TABLE OF CONTENTS BILL OF MATERIALS... 3 SCOPE... 5 NAMEPLATE INFORMATION...
Type Electrically Actuated Ball Valve
GF Piping Systems Electrically Actuated Ball Valve Type 179-184 General Size: ⅜ 4 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM, FPM End Connection: Solvent cement
Brown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION HVAC&R VALVES
SECTION 23 05 23 HVAC&R VALVES PART 1 - GENERAL 1.1 SUMMARY: A. Section includes valves for building services piping. 1.2 GENERAL VALVE APPLICATION REQUIREMENTS: A. Provide valve handle extensions that
Page Concealed Flush Valve (1976 on)
8T _ Series Concealed Flush Valve (16 on) 2 10 14 11 15 1 8 OSC. HANDLE 16 1 10 14 1 12 15 8 4 1 /8" PUSH BUTTON 16 5/8" PUSH BUTTON 5 " PUSH PLATE OUTLETS See Page 40 18 21 2 22 20 6 FOOT PEDAL REPAIR
Technical Data PRESSURE (PSI) DIMENSIONS inches AND WEIGHTS pounds
Technical Data SD 8010A SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY 12586-2035 PRINTED IN U.S.A. SD 8010A/0103 G 5" ACTUATOR REMOVAL CLEARANCE F 1/4 NPT A INTIMIDATOR TYPE J CONTROL
TBH Series True Union Ball Valve Product Guide
17 Q U A L I T Y S E R V I C E I N T E G R I T Y F LOW C O N T R O L TBH Series True Union Ball Valve Product Guide OVERVIEW A new generation of thermoplastic floating ball valves. The TBH Series features
Type Electrically Actuated Ball Valve
Electrically Actuated Ball Valve Type 179-184 General Size: ⅜ 4 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM, FPM End Connection: Solvent cement socket, threaded,
E8 Mini-Matic 3/8" Bolted Plastic Pumps Operating Instructions
E8 Mini-Matic 3/8" Bolted Plastic Pumps Operating Instructions Polypropylene SAFETY WARNINGS Read these instructions completely before installation and start-up. It is the responsibility of the purchaser
Installation / Operation Manual
Installation / Operation Manual Installation Requirements Pressure Range: 10-150 psi Temperature Range: 40-120 F Max Service Flow Rate: 25gpm NOTE: Position filter on a level surface. Filter must be installed
HAYWARD FLOW CONTROL TBH SERIES TRUE UNION BALL VALVE INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
HAYWARD FLOW CONTROL TBH SERIES TRUE UNION BALL VALVE INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS Pg. 1 of 10 PLEASE READ THE FOLLOWING INFORMATION PRIOR TO INSTALLING AND USING HAYWARD TBH SERIES
POWER STEERING PUMP (3VZ FE) POWER STEERING PUMP REMOVAL AND INSTALLATION Remove and install the parts as shown.
STEERING SR41 PUMP (3VZFE) PUMP REMOVAL AND INSTALLATION Remove and install the parts as shown. SR42 STEERING (MAIN POINTS OF REMOVAL AND INSTALLATION) 1. REMOVE PRESSURE TUBES Using SST, remove the pressure
TABLE OF CONTENT. 7-Operating mechanisms of Non-return valve with hydraulic damping cylinder
TABLE OF CONTENT Title 1- Tilting-Disc Non-Return valves with counter weight (NVTW) 2-Parts list 3-Installation Non-return valve and Butterfly Valve 4-Dimensions 5-Installation of Non-return valves with
catalog C-NPS-1014 NIBCO Press System
catalog C-NPS-1014 ahead of the flow NIBCO Press System Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and
DEMCO DEMCO RESILIENT SEATED BUTTERFLY VALVE. Installation, Operation and Maintenance Manual D I S T R I B U T E D V A L V E S DEM-RSBV-IOM
DEMCO RESILIENT SEATED BUTTERFLY VALVE DEMCO TABLE OF CONTENTS DEMCO RESILIENT SEATED BUTTERFLY VALVE Bill of Materials... 1 Scope... 3 Nameplate Information... 3 Storage... 3 Installation... 4 End-of-Line
Division 23 - HVAC Section Switzerland Beallsville K-12 GENERAL DUTY VALVES FOR HVAC PIPING
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of the Contract, including General and Supplementary Conditions and Division
PCC Technova. Series "CPL" Cylindrical Valves. Full & Regular Port 1/2" - 6" A PCC Flow Technologies Company
PCC Technova A PCC Flow Technologies Company Series "CPL" Cylindrical Valves Full & Regular Port 1/2" - 6" FEATURES ISO mounting flange dynamic stem seals elastomer backing stem bearing cavity free design
CRV Flex. Reduces turbulence at the pump...measurably improves pump performance. Go to CRV Flex size charts and 3D CAD drawings.
Search PUMP CONNECTORS CRV Flex Reduces turbulence at the pump...measurably improves pump performance Go to CRV Flex size charts and 3D CAD drawings How it works The CRV Technology consists of a specially
DEMCO Resilient Seated Butterfly Valve
Page 1 of 12 DEMCO Resilient Seated Butterfly Valve Page 2 of 12 Published May 2000 DEMCO is a trademark of Cooper Cameron Corporation Cooper Cameron Corporation, Cooper Cameron Valves Division, 2000.
THIS WARRANTY IS IN LIEU
Installation, Operation, Maintenance and Parts Manual for Backflow Prevention Assemblies Double Check Valve Assembly Series 2000DCA 4" 10" Double Check Detector Assembly Series 3000DCDC 4" 10" Reduced
Igniter, BMS & Valve Parts Directory Contact Us Toll Free:
Igniter, BMS & Valve Parts Directory Phone: (03) 32-9 Email: sales@combustex.com Web: www.combustex.com Combustex is ready to provide you with the spare parts you need to keep your Pilot Pro Igniters,
DK Series Dialock Manual Diaphragm Valves Product Data Sheet
< STANDARDS > ASTM D1784 ASTM D1785 ASTM D4101 ASTM D3222 ASTM D2464 ASTM D2467 ASTM D2466 ASTM F441 ASTM F437 ASTM F439 ASTM F1498 ISO 3609 ISO 10931 IPEX DK Series Dialock Diaphragm Valves are the ideal
DIGIFLO ELECTRONIC FLOWMETER
DIGIFLO ELECTRONIC FLOWMETER PIPE FITTING INSTALLATION MANUAL SADDLE MACHINED IN-LINE BODY MOLDED IN-LINE BODY MOLDED TEE Blue-White R Industries, Ltd. F-2000 Page 2 1.0 Temperature vs. Pressure Temperature
Sachs shock manual. ( ) 2 & 4 Stroke RR Enduro. ( ) RS Dual Sport
Sachs shock manual (2013 2015) 2 & 4 Stroke RR Enduro (2014-2015) RS Dual Sport 1 Introduction The procedures in this manual must take place in a clean environment using professional tools and some specific,
Schedule 40 Fittings & Accessories Turf Swivel Joints
Turf Swivel Joints Turf Swivel Joints, Compact Turf Swivel Joints and Turf Swivel Joint Kits are designed for open discharge systems and are not to be used with valve-in-head sprinklers or quick coupler
SimplAir Piping System. 3/4'' 8'' ( mm) Aluminum Pipe
SimplAir Piping System 3/4'' 8'' (20 220 mm) Aluminum Pipe Simplair Specifications Your pipeline to greater cost savings and efficiency The new SimplAir piping system from Ingersoll Rand uses marine-grade
SimplAir Piping System. 3/4'' 8'' ( mm) Aluminum Pipe
SimplAir Piping System 3/4'' 8'' (20 220 mm) Aluminum Pipe Your pipeline to greater cost savings and efficiency The new SimplAir piping system from Ingersoll Rand uses marine-grade aluminum pipes to efficiently
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 48 /1200 in a variety of straight and reducing styles. Most standard fittings are cast of durable
Henderson Engineers, Inc. SECTION GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS
SECTION 220523 - GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS 1.1 SUMMARY A. This Section includes general duty valves common to most plumbing piping systems. 1. Special purpose
Versa-Matic. Operating Manual. 3/8" Bolted Plastic Pumps. Polypropylene Kynar
Versa-Matic Operating Manual 3/8" Bolted Plastic Pumps Polypropylene Kynar E8 SAFETY WARNINGS Read these instructions completely before installation and start-up. It is the responsibility of the purchaser
Fuel Gas/ Starting Air Valve Series
Sales Manual Section 364 PRODUCT SPECIFICATION 85380-SERIES Fuel Gas/ Starting Air Valve 85380 - Series GENERAL DESCRIPTION The 85380-Series valve is designed for use either as a fuel gas valve or a starting
OPERATION MANUAL AIR-OPERATED DOUBLE DIAPHRAGM PUMPS 3 POLYPROPYLENE PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 80. A JDA Global Company
OPERATION MANUAL 3 POLYPROPYLENE PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 80 AIR-OPERATED DOUBLE DIAPHRAGM PUMPS A JDA Global Company CAUTIONS - READ FIRST CAUTION: Do not apply compressed air to the
CORROSION & CHEMICAL RESISTANT VALVES AND ACTUATORS
CORROSION & CHEMICAL RESISTANT VALVES AND ACTUATORS OFFERING YOU ADVANCED TECHNOLOGY, HIGH STANDARD OF QUALITY AND THE GUARANTEE OF A LEADING MANUFACTURER FOR A CUSTOM DESIGNED SOLUTION TO YOUR CORROSIVE
LOW PRESSURE BALANCED VALVE DIAPHRAGM BALANCED
DIAPHRAGM BALANCED All Rights Reserved. All contents of this publication including illustrations are believed to be reliable. And while efforts have been made to ensure their accuracy, they are not to
SECTION GENERAL-DUTY VALVES FOR HVAC PIPING. A. Contents of Division 23, HVAC and Division 01, General Requirements apply to this Section.
SECTION 23 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Gate Valves 2. Balancing Valves 3. Ball Valves 4. Butterfly Valves 5. Swing Check Valves 1.2 RELATED SECTIONS A. Contents of Division
Innovation + Quality. Valves, controls + systems Balancing and Control Valves
Innovation + Quality Valves, controls + systems Balancing and Control Valves Balancing and Control Valves Catalog Hydrocontrol Static Balancing Valves Recomended flow rate chart 4 Hydrocontrol VTR Static
NDP-25 Specifications
NDP-25 Specifications Port Dimensions (46.2 GPM Max.) Intake & discharge connection: Polypropylene (PPG) Kynar (PVDF) Aluminum (ADC-12) Stainless Steel (316) Cast Iron Air inlet (incl. ball valve): Air
True Union Ball Valve (BN) Product Category. Compact Ball. 2-pieces Compact Ball. Single Union Without Support. Ball Valve. True Union Without Support
Sekisui Industrial Piping Co., Ltd. located in the Chungkang Export Processing Zone of Taichung City in Taiwan. From March of 2006, Sekisui Industrial Piping Co., Ltd. was established as a wholly-owned
SDR-26 (160 PSI) SDR-21 (200 PSI) SDR-17 (250 PSI) MINIMUM WALL (IN.) 20 LENGTH. 1.5" 1.900" N/A N/A N/A.090" ".419 lbs..415 lbs.
u ASTM D2241 PRESSURE PIPE Gasketed Pipe Specifications Northern Pipe Products ASTM D2241 IPS Pressure Rated Pipe is manufactured from compounds conforming to cell class 12454 in accordance with ASTM D1784.
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
CITY OF TAMPA ADDENDUM 2. July 13, Contract 17-C-00030; David L. Tippin Water Treatment Facility Lime Slaker Replacement
CITY OF TAMPA Bob Buckhorn, Mayor CONTRACT ADMINISTRATION DEPARTMENT Michael W. Chucran, Director ADDENDUM 2 July 13, 2017 Contract 17-C-00030; David L. Tippin Water Treatment Facility Lime Slaker Replacement
PRESSURE REGULATOR BACK PRESSURE TO ATMOSPHERE WITH OUTSIDE SUPPLY
PRESSURE REGULATOR BACK PRESSURE TO ATMOSPHERE WITH OUTSIDE SUPPLY All Rights Reserved. All contents of this publication including illustrations are believed to be reliable. And while efforts have been
Penn Valley Pump Company Design Information for Double Disc Pumps
Penn Valley Pump Company Design Information for Double Disc Pumps INTRODUCTION The Penn Valley Double Disc Pump utilizes a unique principle of operation whereby the discs perform the duties of pumping