LABORATORY Viscometers
|
|
- Pamela Hines
- 6 years ago
- Views:
Transcription
1 LABORATORY Viscometers
2 Cannon-Fenske Routine Cannon-Fenske Routine Viscometer according to ASTM D , ASTM D2515, ISO used for quick and easy measurement of the viscosities of transparent Newtonian liquids. Constant value (K) indication at +40 C and +100 C to to to to to to to to to to to to
3 Cannon-Fenske Opaque Cannon-Fenske Opaque Viscometer (reverse flow) according to ASTM D , ASTM D2515, ISO used for dark Newtonian liquids; especially suitable for liquids so dark in colour that cannot be seen in a Cannon-Fenske routine viscometer. It is also used to study shearing stress and shearing rate. Constant value (K) indication at +40 C and +100 C to to to to to to to to to to to to
4 UBBELOHDE acc. to ASTM UBBELOHDE acc. to ASTM D , ASTM D2515, ISO used to determine kinematic viscosity of transparent Newtonian liquids to C to B to to C to B to to C to B to to C to B to to C to B to to All IRMECO capillary viscometers are supplied with a Works Calibration ertificate issued in accordance with the conditions of
5 UBBELOHDE acc. to DIN UBBELOHDE acc. to DIN Part 1, ISO 3105 used to determine kinematic viscosity of transparent Newtonian liquids to c to a to I to Ic to Ia to II to IIc to IIa to III to IIIc to IIIa to IV to IVc to IVa to
6 BS/IP/RF U-tube Reverse Flow BS/IP/RF U-tube Reverse Flow Viscometer (for opaque liquids) according to BS/IP/RF, ASTM D , ISO 3104, ISO 3105 Constant value (K) at 40 C and 100 C to to to to to to to to to to to
7 BS/U-tube Reverse Flow BS/U-tube Reverse Flow Viscometer (for transparent liquids) according to BS, ASTM D , ISO 3104, ISO 3105 Constant value (K) at 40 C and 100 C. A B C D E F G H
8 Further Viscometer models are available: Ostwald Micro-Ostwald Ubbelohde Micro Ubbelohde Semi-Micro Zeitfuchs Cross-Arm Zeitfuchs Transparent Next to Glass Capillary Viscometers we are also able to provide you with Petroleum Testing equipment itself: e.g. Oil Test Centrifuge Viscometer Bath (acc. to ASTM D445 & D2515) Spectrophotometric Colorimeter (acc. to ASTM D1500) IRMECO GmbH & Co. KG Mercatorstr. 62 a Geesthacht / Germany Phone: Telefax: info@irmeco.de Internet:
Let us be your partners in the viscosity measurement
Kinematic Viscosity To all our clients, Let us be your partners in the viscosity measurement Today s business world requests new challenges and further reaction to the market requirements. Fungilab s aim,
More informationProcedure for Koehler Digital Constant Temperature Viscosity Bath
Procedure for Koehler Digital Constant Temperature Viscosity Bath Intro: This unit is designed to perform kinematic viscosity tests using glass capillary viscometers, for this lab you will be using Cannon-Fenske
More informationFor the fastest possible service, you can now reach Koehler via the Internet. On our website, you can:
For the fastest possible service, you can now reach Koehler via the Internet. On our website, you can: Locate the test instrument you need based on your desired ASTM method. Download product information.
More informationAKVdiesel. Automated kinematic Viscometer key features. Fully complies with ASTM D445. Two measuring positions. Remove cap and pour in sample
Suitable for measuring gas oils, distillate fuels and diesel fuels, as specified in ASTM D975, EN590 and ISO 8217 (marine fuels). The RHEOTEK AKV-diesel is a fully automated viscometer system suitable
More informationA SURVEY OF OUR KNOW-HOW : PETROLEUM GLASSWARE VISCOMETER TUBES
N O R M A L A B A N A L I S A SURVEY OF OUR KNOW-HOW : PETROLEUM GLASSWARE VISCOMETER TUBES NORMALAB ANALIS FRANCE S.A. 14, rue des Lilas 76210 LINTOT - FRANCE Tel : (33) 02 35 38 59 59 Fax : (33) 02 35
More informationPetroleum Testing Equipment
Petroleum Testing Equipment www.koehlerinstrument.com BOHEMIA, NEW YORK HOUSTON, TEXAS Worldwide Support Providing quality testing instrumentation and technical support services for research and testing
More informationModel Name: 4 Position RPV-1
Test Methods Model Name: 4 Position RPV-1 FULLY AUTOMATED POLYMER VISCOMETER to determine Relative Viscosity Inherent Viscosity Specific Viscosity Reduced Viscosity Kinematic Viscosity Dynamic Viscosity
More informationVisco. Content viscometry. Applications for AVS measurement systems Page 176. ViscoClock Page 178. AVS 470 Page 180.
Content viscometry Applications for AVS measurement systems Page 176 ViscoClock Page 178 AVS 470 Page 180 AVS 370 Page 184 WinVisco 370 software Page 189 AVS Pro III Page 192 CT 72 Transparent Thermostats
More informationStandard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) 1
Designation: D 445 06 An American National Standard British Standard 2000: Part 71:1990 Designation: 71/1/97 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation
More informationProducts for Asphalt Testing
Products for Asphalt Testing For over 50 years, CANNON Instrument Company has provided asphalt testing labs with critical testing equipment and reagents including viscometers, flash point testers, constant
More informationNick Desiderio, April15, 2014
Determination of Saybolt, Kinematic, and Shear Viscosity for a Variety of Liquids: Baby Oil, Biodiesel, Diesel, Jet Fuel, Yogurt, Ketchup, Glycerin, and Shampoo Nick Desiderio, npd5050@psu.edu, April15,
More informationU tube viscometer. Kinematic viscosity bath RASAYAN
Viscosity The viscosity of a fluid is a measure of its resistance to gradual deformation by shear stress or tensile stress. For liquids, it corresponds to the informal notion of "thickness". For example,
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18436-01-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 22.01.2018 to 28.10.2019 Holder of certificate: ISP
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 20281 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 31.08.2016 to 30.08.2021 Holder of certificate: Deutsche
More informationProviding Industry with turn key solutions - worldwide
Providing Industry with turn key solutions - worldwide SECTION 1 Introduction 2 Our Accreditation Flash Point Standards Cleveland Open Cup Flash Point Pensky-Martens Flash Point Viscosity Standards CCS
More informationParagon Scientific Ltd Proficiency Testing Scheme Schedule
Paragon Scientific Ltd Proficiency Testing Scheme Schedule Proficiency Testing Scheme Schedule Page 1 of 16 Issue : 29/01/2015 Print : 25/06/2018 Viscosity ASTM D445 - Standard Test Method for Kinematic
More informationQuality. Integrity. Confidence
Products & Services Quality. Integrity. Confidence Contents Paragon Scientific Background Information 4 Certified Reference Materials (CRMs) 8 Certified Reference Materials ISO Guide 34 Certified Reference
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12092:2002 Adhesives - Determination of viscosity Adhesives - Determination of viscosity EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN
More informationManual Kinematic Viscosity Bath Tamson TV2000 & TV4000 ASTM D445, IP71, ISO 3104
Manual Kinematic Viscosity Bath Tamson ASTM D445, IP71, ISO 3104 Rev 1.04 Viscosity Business Today Testing kerosene Testing diesel Testing lubricants Testing fuel oils Testing residues Testing bituminous
More informationFungilab company with over than 35 years in the market, has the ISO 9001 quality certification and compliance with European Directives (CE).
PRIC LIST 2017 company with over than 35 years in the market, has the ISO 9001 quality certification and compliance with uropean Directives (C). s manufactured in 316 stainless steel Universal voltage
More informationJason Hartman, 22 February 2015.
Kinematic and Dynamic Viscosity of Diesel, Biodiesel, and JP-900 Compared to Other Non-Standard Fluids with a Demonstration of Viscosity Changes at Varying Temperatures Jason Hartman, jzh5270@psu.edu,
More informationManufacturer since 1873
Manufacturer since 1873 www.petrotest.com Contact Company Development Mail: Petrotest Instruments GmbH & Co. KG Ludwig-Erhard-Ring 13 15827 Dahlewitz Germany From Berthold Pensky... In 1873, Mr. Berthold
More informationCatalogue January 2013, R 2.0
Catalogue 2013-2014 January 2013, R 2.0 TV4000 with TVS and Manifold for ASTM D2171 See page 24 Content 1 ASTM Equipment...5 1.1 How to select the appropriate viscosity bath?... 6 1.2 ASTM D445 High Temperature
More informationPetroleum Test Instruments Product Range
Petroleum Test Instruments Product Range Fall 2012 www.petrotest.com Company Information From Berthold Pensky... In 1873, Mr. Berthold Pensky, an engineer at the Kaiser-Wilhelm- Institut in Berlin-Dahlem,
More informationLOW TEMPERATURE OPERABILITY STARTABILITY & CHARACTERISTICS
ENGINE OIL TESTS LOW TEMPERATURE OPERABILITY STARTABILITY & CHARACTERISTICS The ability of an engine oil to flow or be pumped at low temperatures especially at start up is critical to the life of an engine.
More informationViscosity & Flash Point Standards For Reference, Validation, and Calibration
For Reference, Validation, and Calibration Since 1938 CANNON Instrument Company has been a leader in viscosity measurement. We provide a broad range of viscosity standards and flash point reference materials
More informationTRANSCENDINGBOUNDARIES TRANSFORMINGBUSINESSES
TRANSCENDINGBOUNDARIES TRANSFORMINGBUSINESSES PROFILE Whole-hearted commitment to your business. Scientific Solutions and Services in a short span of time have proved our existence in the industry, competing
More informationManual Kinematic Viscosity Bath Tamson TV12
Manual Kinematic Viscosity Bath Tamson Rev 1.05 1 Viscosity Business Today Testing kerosene Testing diesel Testing lubricants Testing fuel oils Testing residues Testing bituminous or asphalt samples Testing
More informationManufacturer since 1873
Manufacturer since 1873 www.petrotest.com Contact Company Development Mail: Petrotest Instruments GmbH & Co KG Ludwig-Erhard-Ring 13 15827 Dahlewitz Germany From Berthold Pensky... In 1873, Mr. Berthold
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex to the Accreditation Certificate D-PL-20591-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 14.08.2017 to 13.08.2022
More informationManufacturer since 1873
Manufacturer since 1873 www.petrotest.com Contact Company Development Mail: Petrotest Instruments GmbH & Co. KG Ludwig-Erhard-Ring 13 15827 Dahlewitz Germany From Berthold Pensky... In 1873, Mr. Berthold
More informationViscosity & Flash Point Standards For Reference, Validation, and Calibration
& Flash Point s For Reference, Validation, and Calibration Since 1938 CANNON Instrument Company has been a leader in viscosity measurement. We provide a broad range of viscosity standards and flash point
More informationGROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
More informationDate and Time of Pre Bid Meeting November 22, 2016 at a.m
Addendum No. 0 TENDER FOR SUPPLY, DELIVERY, INSTALLATION AND COMMISSIONING OF EQUIPMENT FOR LATEX TECHNOLOGY LABORATORY OF FACULTY OF ANIMAL SCIENCE AND EXPORT AGRICULTURE Tender No - UWU/B/C/6/09 Date
More informationISO 2909 / ASTM D
Oil Viscosity: Technically, the viscosity of oil is a measure of the oils resistance to shear. Viscosity is more commonly known as resistance to flow. If lubricating oil is considered as a series of fluid
More informationRENOLIN Xtreme Temp Plus
Description The RENOLIN Xtreme Temp Plus series was developed for hydraulic systems which are working in a wide temperature range. RENOLIN Xtreme Temp Plus is based on selected semi-synthetic base oils
More informationLubricant Testing Solutions Laboratory Instruments for quality control, analysis and calibration
Laboratory Instruments for quality control, analysis and calibration Flash Point Flash point is a key property for lubricating oils and is included in many specifications. All petroleum products will ignite
More informationThis document is a preview generated by EVS
CEN WORKSHOP CWA 15375 August 2005 AGREEMENT ICS 47.020.30 English version Separators for marine residual fuel - Performance testing using specific test oil This CEN Workshop Agreement has been drafted
More informationLoad disconnect switch Series 8146/5-V11
www.stahl.de Load disconnect switch > Motor switching capacity AC-3 and AC-23 acc. to DIN VDE 0660 part 107 IEC/EN 60947-3 > Isolating characteristics acc. to IEC/EN 60947-3 > Positive opening operation
More informationThe following report discusses effect on HTHS Viscosity of Proton's Engine Oils by addition of X-1R Engine Treatment.
Technical Report The following report discusses effect on HTHS Viscosity of 's s by addition of X-1R Engine. Introduction: Oxidation stability is a chemical reaction that occurs with a combination of the
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17640-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.12.2017 to 04.11.2018 Holder of certificate: Haltermann
More informationShriram Institute For Industrial Research, 14-15, Sadarmangala Industrial Area, Whitefield Road, Bangalore, Karnataka
Certificate Number CC-2083 (in lieu of C-0216, C-0304, C-1497) Page 1 of 7 ELECTRO-TECHNICAL CALIBRATION I. MEASURE 1. Time $ 5 sec to 9900 sec 0.12 sec to 5.8 sec Using Digital Time Totalizer (Digital
More informationFlash Point Process Analyzer
Norms and standards ASTM D 56 ASTM D 93; DIN EN ISO 2719; IP 34 DIN EN ISO 13736; IP170 DIN 51755 Application The BARTEC BENKE Flash Point Process Analyzer (FPA-4) is a continuously measuring analyzer,
More informationDilute Solution Viscosity
Dilute Solution Viscosity Poulten Selfe & Lee has been manufacturing scientific glass instruments since 1850. Today, the company specialises in producing a range of viscosity measurement apparatus (Rheotek
More informationVISCOSITY CALIBRATION STANDARDS
VISCOSITY CALIBRATION STANDARDS Cold-Cranking Simulator Standards (CCS) ASTM D 9 ISO 170 certified CCS viscosity standards are for the calibration and verification of analytical equipment used in Cold
More informationMeasuring equipment. Volumetric pipettes, PP, with ring mark, class B Capacity
Volumetric pipettes. With ISO-COLOR-Code, acc. to DIN (ISO 648). Calibrated to contain EX. With amber stain DIFFICO ring marks and inscriptions, with tempered tips. 1. Class B. DIN 12690. With one mark.
More informationCANNON CAV 2000 Series Automatic Viscometers
CANNON CAV 2000 Series Automatic Viscometers Modular Benchtop Unit (Small Footprint) Variable Temperature Selection from 20 C to 100 C (150 C with High-Temperature Option) Viscosity Range of 0.5 to 5000
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
Unit A Shears Way Brooklands Close Sunbury-on-Thames Middlesex TW16 7EE Contact: Mr Craig Stone Tel: +44 (0)1932 732103 Fax: +44 (0)1932 732113 E-Mail: craig.stone@intertek.com Website: SUMMARY OF ACCREDITATION
More informationFuel oils Specification
TANZANIA STANDARD CDC15 (4029)P3 (Rev. of TZS 673:2014) Fuel oils Specification 0 Foreword This Tanzania Standard was prepared under the direction of Petroleum and Petroleum Products Technical committee,
More informationTESIGNG OF FUELS: VISCOSITY OF LIQUID FUELS
Department of Mechanical Engineering Indian Institute of Technology New Delhi II Semester -- 2017 2018 MCL 241 Energy systems and Technologies TESIGNG OF FUELS: VISCOSITY OF LIQUID FUELS 1. Introduction
More informationProcess Analyzer. Viscosity Index Analyzer Model P-950. Credible Solutions for the Oil and Gas Industry
Process Analyzer Viscosity Index Analyzer Model P-950 Credible Solutions for the Oil and Gas Industry Viscosity Index Analyzer Process Model P-950 Analyzer To remain competitive, today s refiners must
More informationAccreditation No: LAB 026. Attock Refinery Limited, Rawalpindi, Pakistan
Accreditation No: Awarded to Attock Refinery Limited, Rawalpindi, Pakistan The scope of accreditation is in accordance with the standard specifications outlined in the following page(s) of this document.
More informationAccreditation No: LAB 026. Attock Refinery Limited, Rawalpindi, Pakistan.
Issue : 10/08/15 Accreditation No: Awarded to Attock Refinery Limited, Rawalpindi, Pakistan. The scope of accreditation is in accordance with the standard specifications outlined in the following page(s)
More informationMini temperature switch Stainless steel switch enclosure Model TXS
Mechatronic temperature measurement Mini temperature switch Stainless steel switch enclosure Model TXS WIKA data sheet TV 31.70 Process Mini Series Applications Temperature monitoring and control of processes
More informationPneumatic control unit for decentralized automation of ELEMENT process valves
890 Pneumatic control unit for decentralized automation of ELEMENT process valves Type 890 can be combined with... Compact design Integrated pilot valve with manual override Integrated control air routing
More informationScientific glass blowing
Scientific glass blowing Normalab France S.A.S. is specialized in the scientific glass blowing since the beginning of the company in 1963. Thanks to this experience of more than fifty years and a team
More informationLubricating Oils. Nonalcoholic Beverages & Concentrates. Petrochemistry Standards. August 2014 John Barron Page 1 of 6
Lubricating Oils Nonalcoholic Beverages & Concentrates Petrochemistry Standards John Barron Page 1 of 6 Reagents and Standards for Lubricating Oils ASTM D6045 Standard Test Method for Color of Petroleum
More informationGeotechnical Testing Equipment
asphalt equipment production Asphalt is a sticky, black and highly viscous liquid or semi-solid that is present in most crude petroleum. It is most commonly used in road construction. The material consists
More informationISO 4925 INTERNATIONAL STANDARD. Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems
INTERNATIONAL STANDARD ISO 4925 Second edition 2005-02-01 Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems Véhicules routiers Spécifications pour liquides de frein à
More informationStandard Test Method for Kinematic Viscosity of Lubricating Oils.
International Refereed Journal of Engineering and Science (IRJES) ISSN (Online) 2319-183X, (Print) 2319-1821 Volume 6, Issue 10 (Octoberber 2017), PP.12-15 Standard Test Method for Kinematic Viscosity
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Prenton Way Contact: Dr J Roberts North Cheshire Trading Estate Tel: +44 (0)151 649 9955 Prenton Fax: +44 (0)151 649 9977 Wirral E-Mail:
More informationCompact temperature switch Model TCS
Mechatronic temperature measurement Compact temperature switch Model TCS WIKA data sheet TV 31.64 Process Compact Series Applications Temperature monitoring and control of processes Safety-critical applications
More informationVISCOSITY DATA FOR ASPHALTS USED BY THE TEXAS HIGHWAY DEPARTMENT. R. N. Traxler Research Engineer Texas Transportation Institute
VISCOSITY DATA FOR ASPHALTS USED BY THE TEXAS HIGHWAY DEPARTMENT by R. N. Traxler Research Engineer Texas Transportation Institute Progress Rep:ort No. 6 Research Project No. 15 (2-8- 59-9) July 1, 1963
More informationSoftening point by Ring & Ball. Density and relative density of liquids by Hubbart pycnometer
Softening point by Ring & Ball Density and relative density of liquids by Hubbart pycnometer Distillation of petroleum Melting point of petroleum wax Precipitation number of lubricating oils Saponification
More informationASTM D4. Bitumen Content Qty. Model Description. Related Standards: ASTM D370, E177
ASTM D4 Related Standards: ASTM D370, E77 Bitumen Content H-550 Bitumen soluble in organic solvents set H-550. Gooch crucible H-550.2 Crucible holder H-550.3 Buchner funnel H-550.8 Glass fiber filter H-255
More informationASTM D4. Bitumen Content Qty. Model Description. Related Standards: ASTM D370, E177
ASTM D4 Related Standards: ASTM D370, E77 Bitumen Content H-550 Bitumen soluble in organic solvents set H-550. Gooch crucible H-550.2 Crucible holder H-550.3 Buchner funnel H-550.8 Glass fiber filter H-255
More informationISO INTERNATIONAL STANDARD
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 11158 Second edition 2009-09-15 Corrected version 2009-12-01 Lubricants, industrial oils and related products (class L) Family H (hydraulic systems)
More informationROTOFIX 46/46 H Benchtop centrifuges classic/heated
ROTOFIX 46/46 H Benchtop centrifuges classic/heated ROTOFIX 46/46 H Special applications require special solutions Centrifuges for use in research and industrial laboratories should ideally be robust and
More informationwith pneumatic actuator Pneumatic process valve, Y-pattern DN ARI-STEVI AS 350 Pneumatic actuator - with screwed sockets
with pneumatic actuator Pneumatic process valve, Y-pattern DN 15-50 ARI-STEVI AS 350 - with screwed sockets Piston actuator Required air supply pressure, max. 10 bar Operating pressure, max. 16 bar Page
More informationViscometry Rheometry. The Range. ::: Intelligence in Rheometry
Viscometry Rheometry The Range ::: Intelligence in Rheometry Rheometer System Measuring methods Measuring drive Measuring systems Temperature control systems Software Measuring results Special product
More informationUSV Ultra Shear Viscometer
USV Ultra Shear Viscometer A computer controlled instrument capable of fully automatic viscosity measurements at 10,000,000 reciprocal seconds Viscosity measurement background Accurate measurement of dynamic
More informationEBA 21. Benchtop Centrifuge
EBA 21 Benchtop Centrifuge EBA 21 Maximum performance in microlitre centrifugation coupled with reliability in daily laboratory routine EBA 21- powerful and versatile not only in microlitre centrifugation.
More informationScope of testing. State: March Contents: siemens.com/energy
Scope of testing State: March 2017 Siemens AG - Material testing laboratory Nuremberg Contents: 1. Our services 2. Quality assurance 3. Sampling and bottles 4. Scope of testing of material testing laboratory
More informationProFlow TO BE REALLY SURE. Vane Meters. Experience in flow measurement. Introduction
ProFlow N142 P R O D U C T B U L L E T I N Vane Meters Special versions This brochure comprises only VAF Instruments standard delivery program. Special flowmeter variants can be offered as tailor-made
More informationSuper Sanati Group Founded 1963
Super Sanati Group Founded by : Mr. M. E. Esmaili - Zaree Measurement, Control, System, Calibration SUPER SANATI GROUP Since 1963 Measurement Sales After Sales Temperature Pressure Flow & Density Control
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ manually operated 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel. The valve spindle is sealed by a self-adjusting gland
More information2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50
2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50 High cycle life Flow optimised body in stainless steel 316L Deliverable with fl ow direction below or above seat Clean design
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 15380 Third edition 2016-12-01 Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HETG,
More informationSelected Technical Papers STP1564 Viscosity and Rheology of In-Service Fluids as They Pertain to Condition Monitoring
Selected Technical Papers STP1564 Viscosity and Rheology of In-Service Fluids as They Pertain to Condition Monitoring Editors: Amy Rishell Theodore Selby ASTM International 100 Barr Harbor Drive PO Box
More informationViscomaster TM series viscosity transmitters for marine and power HFO applications
Viscomaster TM series viscosity transmitters for marine and power HFO applications n On-line real-time Kinematic viscosity n Marine approved n Minimum maintenance n High accuracy n Simple to use Viscomaster
More informationRegards from the Team at Rheology Solutions.
Rheology Solutions is the sole Australian distributor of this product range and we welcome the opportunity of discussing your application requirements. We hope the information you are seeking is contained
More informationInstruments for the Analysis of Petroleum Products. Oxidation Stability
Instruments for the Analysis of Petroleum Products Oxidation Stability What is Oxidation Stability? Oxidation stability describes the resistance of a material towards oxygen. This is a basic requirement
More informationCirculation pumps BFP-ATEX-T3/T4
Circulation pumps BFP-ATEX-T3/T F ATEX - range of use: to zone 1 and zone 1 T3 to zone 1 and zone 1 T Low noise emission High vol. efficiency Optimum suction Gerotor principle Resistant to contamination
More informationReturn Line Filter HF4R up to 450 l/min, up to 10 bar
Return Line Filter HF4R up to 450 l/min, up to 10 bar 9" 18" 27" 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed in accordance with international regulations.
More informationISO 3838 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 3838 Second edition 2004-05-01 Crude petroleum and liquid or solid petroleum products Determination of density or relative density Capillarystoppered pyknometer and graduated
More informationSimulation, Rheology and Efficiency of Polymer Enhanced Solutions April 5, 2017
CCEFP INDUSTRY-UNIVERSITY SUMMIT of Polymer Enhanced Solutions April 5, 2017 Duval Johnson, Uma Shantini Ramasamy, Ashlie Martini, University of California Merced, Merced, CA Mercy Cheekolu, Pawan Panwar,
More informationTemperature Calibration Guide
Temperature Calibration Guide Three Series SIKA divides temperature calibrators into three series. Depending on your requirements, up to 24 models are available. Reasons for a calibration TP Basic Efficiency
More informationCrude Oil and E&P Testing Laboratory Instruments for quality control, analysis and calibration
Laboratory Instruments for quality control, analysis and calibration S Analyser with Vapour Phase Processor (VPP) TM (SA4000-3 & SA4015-0) ASTM D7621 Appendix X1; IP 570 Procedure A Measurement range from
More informationROTOFIX 46/46 H Benchtop centrifuges classic/heated
ROTOFIX 46/46 H Benchtop centrifuges classic/heated ROTOFIX 46/46 H DESIGN Special applications require special solutions Ideal centrifuges for research and industrial laboratories offer a wide range of
More informationOperating Instruction for Flowmonitor. Model: DF-WM
Operating Instruction for Flowmonitor Model: DF-WM 1. Contents 1. Contents... 2 2. Note... 3 3. Instrument Inspection... 3 4. Regulation Use... 4 5. Operating Principle... 5 6. Mechanical Connection...
More informationRENOLIN CLP PLUS Long-term approved special gear oils with extremely high ageing stability and excellent detergency (DD) selfcleaning
Long-term approved special gear with extremely Description Special lubricants are designed to solve problems and to guarantee trouble-free working at severe ambient conditions. The products of the RENOLIN
More informationThe filling level sensors are designed in accordance to the following standards
Instructions according to Portaria N 179/2010 UL-BR 17.0706 Filling Level Sensors type VISY-Stick and type TORRIX Ex Version: 09.2017 I Range of application The filling level sensors are designed for continuous
More informationPenetration. Test Methods
Test Methods Penetration of Bituminous Materials ASTM D5; IP 49; DIN 52010 Cone Penetration of Lubricating Grease ASTM D217; IP 50; ISO 2137; DIN 51804; FTM 791-311, FTM 791-313 Cone Penetration of Petrolatum
More informationROTOFIX 46/46 H Benchtop centrifuges classic/heated
ROTOFIX 46/46 H Benchtop centrifuges classic/heated ROTOFIX 46/46 H DESIGN Special applications require special solutions Ideal centrifuges for research and industrial laboratories offer a wide range of
More informationSVM Stabinger Viscometer. ::: Viscometry at its best
SVM 3000 Stabinger Viscometer ::: Viscometry at its best Small and Mighty The SVM 3000 Stabinger Viscometer is a rotational viscometer with a cylinder geometry. It is based on a modified Couette principle
More informationGas-actuated temperature switch Stainless steel switch enclosure Model TWG
Mechatronic Electrical temperature measurement Gas-actuated temperature switch Stainless steel switch enclosure Model TWG WIKA data sheet TV 31.60 Process Performance Series Applications Temperature monitoring
More informationCompany name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 13/03/2017
Position Qty. Description 1 NB 1-31/29 A-F2-B-E-BAQE Phone: 4 84 61 Date: 13/3/217 Product No.: On request Non-self-priming, single-stage, centrifugal volute pump designed according to ISO 199 with dimensions
More informationStandard Test Method for Measuring Viscosity at High Shear Rate and High Temperature by Tapered Bearing Simulator 1
Designation: D 4683 04 An American National Standard Standard Test Method for Measuring Viscosity at High Shear Rate and High Temperature by Tapered Bearing Simulator 1 This standard is issued under the
More informationEBA 21. Small Centrifuge
EBA 21 Small Centrifuge EBA 21 PERFORMANCE Maximum performance in microlitre centrifugation coupled with reliability in daily laboratory tasks. The EBA 21 is powerful and versatile not only in microlitre
More information