TECHNICAL CHARACTERISTICS APPLICATIONS
|
|
- Lilian Garrison
- 5 years ago
- Views:
Transcription
1 TP NTI VIRTION MOUNTS M-MNOUHO&Reg; TP type anti vibration mounts have been designed to provide effective vibration isolation of medium to high frequency applications in a variety of industrial machinery - generator sets, motor pumps, motor compressors, hydraulic units, etc. The top metal part is cup shaped to protect the rubber section from contamination by oil, grease, petrol diesel and other contaminants. THNIL HRTRISTIS The compound used is based on a standard natural rubber specifically designed to have good ageing properties. Load capacities shown in catalogue are the maximum Static values with the capability of withstanding occasional extreme dynamic overloads. TP mounts have stiffness values 4 times greater in the radial plane than the axial plane, providing effective resistance to transient lateral shock loads. PPLITIONS Suspension systems where it is deemed necessary to control any Pitching or Rolling movement which could strain external connections. Medium and high frequency motor compressor units. en sets. Hydraulic Units. Marine auxiliary units. Ventilators, etc. M MNOUHO Industrialdea Zona - Pab. 35. steasu , ipuzkoa ax: In order to adapt its products to the state of the art, M S.. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
2 TP NTI VIRTION MOUNTS RWINS I. 1 I. 2 1 Ø IMNSIONS Type Weight (gr.) TP ,7 31,5 M TP ,6 43 M-10 72,2 9, Load (kg) Shore I. ode Sh Sh Sh Sh Sh Sh Sh Sh Sh M MNOUHO Industrialdea Zona - Pab. 35. steasu , ipuzkoa ax: In order to adapt its products to the state of the art, M S.. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
3 TP NTI VIRTION MOUNTS RWINS I. 1 I. 2 1 Ø IMNSIONS Type Weight (gr.) TP M , TP ,5 75 M Load (kg) Shore I. ode Sh Sh Sh Sh Sh Sh Sh Sh Sh Sh Sh Sh M MNOUHO Industrialdea Zona - Pab. 35. steasu , ipuzkoa ax: In order to adapt its products to the state of the art, M S.. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
4 TP NTI VIRTION MOUNTS lastical properties 1000 NTURL RQUNIS M MNOUH O Type TP 1000 LO LTION RPHS MNOUH O Type TP TP TP TP TP Load (Kg) TP TP TP TP TP TP TP TP TP Load (Kg ) TP TP TP TP TP TP TP TP TP TP TP Natural frequency Hz , eflection M MNOUHO Industrialdea Zona - Pab. 35. steasu , ipuzkoa ax: In order to adapt its products to the state of the art, M S.. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
5 TP NTI VIRTION MOUNTS OPRTION N SSMLY TP mountings use the rubber section in a shear mode to achieve the best load /deflection values. ue to the interior design of the rubber section they have a progressive stiffness feature, preventing metal to metal contact in the case of impacts or extreme overload in transient shock conditions on mobile equipment. TP mounts can be attached to the support structure by Set Screws or olts, or by threaded studs securely grouted to the floor to suit the base plate attachment holes. VNTS asily assembled to the machine and the support structure. Top metal cap protects the rubber section against various contaminants- diesel, oils, grease, petrol, etc. ffectiveness three variations in hardness - Soft: 45, Medium: 60, Hard: 75. This enables the user to choose each mount depending upon the load to be supported and the frequency of the vibrations to be attenuated. M MNOUHO Industrialdea Zona - Pab. 35. steasu , ipuzkoa ax: In order to adapt its products to the state of the art, M S.. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
BRB ANTI VIBRATION MOUNTS
R NTI VIRTION MOUNTS M Mecanocaucho R aptive anti vibration mounts are anti vibration elements which work the rubber in shear and compression. Their high profile rubber sections produce larger deflections,
More informationRubber Metal antivibration mounts
M Mecanocaucho S engine anti vibration mounts are antivibration elements which work the rubber in shear and compression with an optimal ratio of stiffness and horizontal stability. These engine mounts
More informationBRB ANTI VIBRATION MOUNT
R NTI VIRTION MOUNT M Mecanocaucho R aptive anti vibration mounts are antivibration elements which work the rubber in shear and compression. Their high profile rubber sections produce larger deflections,
More information22000 MOUNT SERIES. Features. Benefits. Load Range. Low-profile, high capacity mounts for vibration and shock protection.
2 MOUNT SERIES Low-profile, high capacity mounts for vibration and shock protection. Features Fail-safe when used with snubbing washer Axial to radial stiffness of 1:1 Low natural frequency Sturdy, reliable
More informationINDUSTRIAL CONICAL MOUNTS
INDUSTRIAL CONICAL MOUNTS Rugged, high load capacity mounts provide vibration, shock and noise protection A P P L I C A T I O N S Cabs/platforms Engines Generator sets Transmissions Compressors Fuel tanks
More informationINDUSTRIAL CONICAL MOUNTS
INDUSTRIAL CONICAL MOUNTS Features One piece bonded construction High load capacity Low natural frequency Non-linear stiffness Snubbing feature on bottom Benefits Consistent performance Rugged, high load
More informationThe perfect solution for boat propulsion.
The perfect solution for boat propulsion. A propulsion system wich reduces noise up to 90% Simplifies engine/gearbox installations remarkably Alignment procedure can be performed with measure by the eye
More informationV MOUNT SERIES. Engine mounts isolate vibration, absorb shock and attenuate noise due to structure-borne vibrations.
V MOUNT SERIES Engine mounts isolate vibration, absorb shock and attenuate noise due to structure-borne vibrations. APPLICATIONS Class 6,7,8 truck engines Bus engines Off-highway vehicle engines On & off-highway
More informationCENTER-BONDED MOUNTS. Center-Bonded Mounts. Page 51 of 124
Page 51 of 124 Center-Bonded Mounts Featuring: CB-1100 Series CB-1180 Series CBA Series CBA-50 Series STA Series Safetied Tubeform Series LORD Center-Bonded Mounts isolate vibration, control shock and
More informationBuffer elements 1109
Buffer elements 1109 Technical information for rubber-metal buffers Our rubber-metal buffers are simple and cost-efficient standard units for elastic mounting. They are ideally suited for compressive and
More informationTrelleborg Industrial Antivibration Systems. A safe choice all over the World
Trelleborg Industrial ntivibration Systems safe choice all over the World Trelleborg Industrial VS global supply and manufacturing of Novibra and Metalastik antivibration solutions. uide when choosing
More informationANTI VIBRATION MOUNTS
ANTI VIBRATION MOUNTS Insulators The insulators, because of their electrically insulating property, are used for the bearing of blasts, airconditioning units and fans. The fact that they can be anchored
More informationSpecialists in Anti-Vibration Mountings and Rubber Engineering Components
Specialists in Anti-Vibration Mountings and Rubber Engineering Components Index Mounting Selection Page 1 Cylindrical Bobbins Page 2-7 Buffers & Bump Stops Page 8-11 Instrument & General Purpose Page 12-13
More informationINTRODUCTION SBPT DIAPHRAGM COUPLING: FEATURES APPLICATION
INTRODUCTION SBPT is an ISO 9001: 2000 certified company, specializing in Design and Manufactures of highly flexible Diaphragm Coupling since 1994. Advance analysis and manufacturing process have produced
More informationLinkeo. High Temperature Flexible Exhaust Decoupler. Innovation for your future
Linkeo High Temperature Flexible Exhaust Decoupler Innovation for your future 10 years of research The Linkeo solution has reached the market after 10 years of research and development Major applications
More informationUSING STANDARD ISOLATORS TO CONTROL UNWANTED MACHINE VIBRATION
USING STANDARD ISOLATORS TO CONTROL UNWANTED MACHINE VIBRATION From small medical pumps to large diesel engines, vibration is unavoidable and dangerous if left unchecked in rotating and oscillating machinery.
More informationAnti Vibration Mounts
utomation Control Equipment nti Vibration Isolation roducts Vibration Technology 2 Overview Hard ell 3 oft ell 6 Type CQ-E- 0 Type -Q 3 Universal 6 Cones 20 Height djuster 30 Hard ell 3 Hard ell which
More informationPROPULSION EQUIPMENT DOCUMENTATION SHEET. Propulsion Equipment
PROPULSION EQUIPMENT General Vessels like rescue boats, patrol boats and anchor handling boats have to show 100 percent performance, even in the most extreme conditions. These so called s pecial seagoing
More informationApplications (standard isolators) Applications (medium and heavy duty isolators ) Large generator sets. Isolator selection
General Standard isolators - Circular spring isolators type CR, CS, CM, CT and CX are available for a load range up to 12.45 kn at 25 mm deflection and up to 10.25 kn at 50 mm deflection. The helical spring
More informationVibration Control Technology Industry. Catalogue 2012
Vibration Control Technology Industry Catalogue 212 The information in this product catalogue is based on the experience gained in decades of research on the development and manufacture of components for
More informationGoulds Small Capacity Double Suction Pump
Goulds 3410 Small Capacity Double Suction Pump 3410 Double Suction Pumps Designed for a Wide Range of Industrial, Municipal, Capacities to 7,000 GPM (1591 m3/h) Heads to 550 feet (168 m) Temperatures to
More informationiglidur PRT polymer slewing ring bearings
polymer slewing ring bearings Completely maintenance-free Easy to install and replaceable sliding pads High wear resistance For very high loads and high stiffness Stainless steel versions available Extensive
More information(d) Bore Size Check from Dimensions table (page 112) that chosen flanges can accommodate required bores.
Fenaflex Couplings The Fenaflex coupling is a highly flexible, torsionally elastic coupling offering versatility to designers and engineers with a choice of flange combinations to suit most applications.
More informationCYLINDRICAL STUD MOUNT SERIES
CYLINDRICAL STUD MOUNT SERIES Versatile, low-cost, lightweight stud type mounts for vibration, shock, noise control, and motion accommodation. APPLICATIONS Fans Appliances HVAC equipment Electronic equipment
More informationSPIRACON. ROLLER SCREWS SPIRACON PRODUCT CATALOGUE
SPIRACON ROLLER SCREWS PRODUCT CATALOGUE SPIRACON www.powerjacks.com TOTAL CAPABILITY IN ACTUATION Power Jacks is a world leader and pace-setter in the field of mechanical linear actuation and power transmission,
More informationJaw Couplings REK DCO
elastic for dynamic applications with curved jaws Features Compensation of axial, radial and angular misalignments Adsorbs vibrations Progressive torsion spring properties due to primarily pressurised
More informationMECHANICAL EQUIPMENT. Engineering. Theory & Practice. Vibration & Rubber Engineering Solutions
MECHANICAL EQUIPMENT Engineering Theory & Practice Vibration & Rubber Engineering Solutions The characteristic of an anti-vibration mounting that mainly determines its efficiency as a device for storing
More informationTeSys contactors. Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current Ie. to be wired in series
Selection 3-pole shockproof contactors FG d.c. supply Selection guide for utilisation categories DC-1 to DC-5 Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current
More informationSMAC ISOLATORS CATALOGUE
SMAC ISOLATORS CATALOGUE Building together future solutions Indice F Overview SMAC is a dynamic company specializing in the analysis, design and manufacturing of complex rubber parts for demanding fields
More information1,5 1,5 W W W. height H (mm) length L (mm) width W (mm) A X S
definition series AX2 M4 M4 M4 1,5 1,5 1,5 L H L H L H 1,5 1,5 1,5 7 7 7 All metal multidirectional anti-vibration/shock mounts. Exceptional reliability and long life. High damping. No ageing. Corrosion
More informationRING & BUSHING MOUNTS
RING & BUSHING MOUNTS Ring and bushing isolators are versatile, low cost mounts that can satisfy many vibration control problems. They are rugged, low-cost isolators easily installed. Ring and bushing
More informationELASTOMERIC ISOLATORS
ELASTOMERIC ISOLATORS ELASTOMERIC ISOLATORS series SI S02 INTRODUCTION CERTIFICATIONS In 1992, FIP Industriale secured CISQ-ICIM certification for its Quality Assurance System in conformance with EN 29001
More informationMicrocellular polyurethane as steering coupling element
Microcellular polyurethane as steering coupling element Material specific properties of solutions based on Cellasto -Elastolit-X composite structures Contents Cellasto material specific properties: Classification,
More informationMBN Multistage Ring Section Pumps
Sulzer Pumps MBN Multistage Ring Section Pumps The Heart of Your Process Sulzer Pumps Sulzer Pumps is one of the world leaders in state-of-the-art pumping solutions. Combining engineering and application
More informationAccessories smart additions for efficiency and intelligent performance
smart additions for efficiency and intelligent performance Metal bellows couplings Perfectionists you can count on Metal bellows couplings are designed for the highest requirements in servo drive technology.
More informationVIBRATION CONTROL VIBRATION CONTROL
13 VIBRATION CONTROL Vibration Control Isomounts Isomounts are general-purpose vibration isolators suitable for mobile and static equipment installations. Available in three different sizes Isomounts come
More informationEflex and Powerpin Flexible Couplings
Eflex and Powerpin Flexible s Accepts parallel, angular and axial misalignment Torsionally flexible Simple assembly Wide range of standard designs No lubrication 80 or 90 shore hardness close fitting elements
More informationTYPE TSC/TLC T SERIES METAL MEMBRANE COUPLINGS
A Stainless Steel Flexible Discs B Overload Collars C Cartridge Transmission Unit D Anti-Fly Feature E Anti-Corrosion Treatment F Hubs with Puller Holes G Externally Wrenched Bolts H Large Shaft Diameters
More informationTUBUS-Series Type TA
TUBUS-Series Type TA Profile Damper Axial Damping 84 The profile damper type TA from the innovative ACE TUBUS series is a maintenancefree, self-contained damping element made from a special Co-Polyester
More informationCONTENTS. D-LOK Ball Bearings
CONTENTS Ball Bearings Features/Benefits.................................................. B5-2 How to Order/Nomenclature......................................... B5-4 Selection........................................................
More informationWIRE ROPE ISOLATORS C/CB SERIES APPLICATIONS HELICAL WIRE ROPE ISOLATORS FEATURES & BENEFITS
0.03-1.50 APPLICATIONS HELICAL The C/CB Series isolators are made up of helical, stranded-wire rope held with rugged metal retaining bars. This design provides excellent shock and vibration isolation in
More informationBUSHINGS. Bushings. Page 77 of 124
Page 77 of 124 Bushings Featuring: Center-Bonded Bushings Square-Bonded Bushings LORD Center-Bonded Bushings and Square-Bonded Bushings are used in applications where the absorption shock, attenuation
More informationTLC. T Series Couplings. Product Description. Design Features
TLC A Stainless Steel, Flexible Membranes B Overload Collars C Cartridge Transmission Unit D Anti-Fly Feature E Anti-Corrosion Treatment F Hubs with Puller Holes G Externally Wrenched Bolts H Large Shaft
More informationTUBUS-Series Type TA
TUBUS-Series Type TA Profile Damper Axial Damping The profile damper type TA from the innovative ACE TUBUS series is a maintenancefree, self-contained damping element made from a special Co-Polyester Elastomer.
More informationTUBUS-Series Type TA
TUBUS-Series Type TA Profi le Damper Axial Damping 76 The profile damper type TA from the innovative ACE TUBUS series is a maintenance-free, self-contained damping element made from a special Co-Polyester
More informationTECHNICAL PRODUCT INFORMATION. optibelt ALPHA. For drive solutions with polyurethane Optibelt timing belts
TECHNICAL PRODUCT INFORMATION optibelt ALPHA For drive solutions with polyurethane Optibelt timing belts optibelt ALPHA for drive performance Optibelt ALPHA timing belts are manufactured in moulds and
More informationPLATEFORM MOUNTS Page 19 of 124
PLATEFORM MOUNTS Page 19 of 124 Plateform Mounts Featuring: Plateform Mounts Heavy-Duty Plateform Mounts Multiplane Mounts LORD Plateform Mounts provide effective isolation against vibration. The contour
More informationSUMMARY. Contents. Chapter
SUMMARY Chapter Contents 1 General information...2 1.1 Symbols and units of measurement...2 1.2 Features of MP series...3 1.3 Versions...4 1.4 Selecting the gear unit...5 1.5 Service life of bearings...6
More informationf Z b SW D C C F T Unit size / Number of poles Housing length - B vr = standard labyrinth with axial lip seal
TSEV - Style Spindle Style 1) Attachment k L M TSEV 50 x 200-071/2 TSEV 50 x 250-071/2 TSEV 50 x 315-071/2 TSEV 60 x 200-080/2 TSEV 60 x 250-080/2 TSEV 60 x 315-080/2 TSEV 60 x 355-080/2 TSEV 80 x 250-090/2
More information340 Series Double Suction Split Case Pumps
340 Series Double Suction Split Case Pumps Flows to: 30,000+ GPM Heads to: 550 Feet Temperatures to: 250 F 140 Years of Pump Manufacturing American-Marsh Pumps, one of the oldest pump lines in America,
More informationSIT TORqUE-FLEX - Classical - CTX ZX - AX - BX - CX APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL. MOULDED COG.
SIT TORqUE-FLEX - Classical - CTX Performance index ZX - AX - BX - CX MOULDED COG APPLICATIONS Designed for operating at high speeds over small diameter pulleys and short center distances. Also for use
More informationFEATURES/BENEFITS. Setscrew Ball Bearings. DODGE End Covers
or over 70 years, DODGE has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built
More informationBACKLASH FREE AND STANDARD JAW COUPLING
BACKLASH FREE AND STANDARD JAW COUPLING Up to 9.600 Nm of torque and 130 mm bore GAS/SG e GAS 25 Technology for Safety GAS/SG-ST - backlash free jaw coupling «in steel»: introduction Made in steel fully
More informationMÜPRO. One-piece pipe clamps. Sprinkler pipe clamps. Refrigerant pipe clamps. Two-piece pipe clamps. Heavy-duty pipe support/din pipe clamps
0. MÜPRO 1. Vibration control 2. Fire protection 3. Pipe clamps 4. Support channels 5. Accessories 6. Anchor points/expansion points 7. Heavy-duty pipe support 8. MPT-Support system 9. Ventilation 10.
More informationSPMM OUTLINE SPECIFICATION - SP20016 issue 2 WHAT IS THE SPMM 5000?
SPMM 5000 OUTLINE SPECIFICATION - SP20016 issue 2 WHAT IS THE SPMM 5000? The Suspension Parameter Measuring Machine (SPMM) is designed to measure the quasi-static suspension characteristics that are important
More informationStandard with cone bushing. Backlash-free Safety Clutch
EAS -Compact ratchetting clutch/synchronous clutch The Backlash-free Safety Clutch for Standard with cone bushing Packaging Machinery Machine Tools Paper Machinery Indexing Drives Servo Motors EAS -NC
More informationMounting hardware and accessories
Mounting hardware and accessories Mounting considerations Surface Wilcoxon s rugged sensors are designed to operate continuously in harsh industrial environments. Consideration of mounting surface and
More informationSentinel D-Box Twin Fan
Sentinel D-Box Twin Fan Duct Sizes mm Performance - Airflow.1 to 1.3m 3 /s, Pressure up to 65Pa Sentinel demand ventilation fan controller with lockable isolator Latest energy saving EC/DC motors Aluzinc
More informationMULTI CROSS RILLO. Highly flexible tyre coupling with taper bushings
MULTI CROSS RILLO Highly flexible tyre coupling with taper bushings Maschinenfabrik Dipl.-Ing. Herwarth Reich GmbH Vierhausstr. 53 D-44807 Bochum P.O. Box 10 20 66 D-44720 Bochum Tel.: +49 / (0)234 / 959
More informationTrelleborg Industrial Antivibration Systems
Trelleborg Industrial ntivibration Systems safe choice all over the World Trelleborg Industrial VS global supply and manufacturing of Novibra and Metalastik antivibration solutions. uide when choosing
More informationGKN Stromag highly flexible couplings for universal shafts Solutions for new technologies
Product Catalogue Couplings GKN Stromag highly flexible couplings for universal shafts Solutions for new technologies Solutions for new technologies > The GKN Stromag IGE...FG concept > Highly flexible
More informationSize and Configurations
!!"#!""!"$%!!" &'()&('& AK Axial Flow Fans the high efficiency direct-driven fan with adjustable pitch impeller specially designed to operate with low noise emission and vibration that meets the stringent
More informationTORQUE LIMITERS SERIES 100
TORQUE LIITERS SERIES 100 Engaged Engaged TORQUE LIITER FOR SERVO DRIVES BACKLASH FREE Quality and Autogard are synonymous with overload protection. The company s reputation for high quality products is
More informationStyle 234 Restrained Flexible Single-Gasket Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date
Victaulic Bolted Split-Sleeve Products (VBSP) Style 234 carbon steel couplings (formerly Depend-O-Lok Air/FluidMaster) are single-arch couplings that are commonly used in buried or exposed steel pipe applications
More informationS ACON SEACON SEACO QUIPMEN EQUIPMENTS SEACON EQUIPMENTS
S ACON EQ NTS ACON E NTS A S EQ A TS TS TS TS TS E AC AC AC AC AC AC S S UIP IPME IPME QU P QUI QUI EQ EQUI Q EQ EQ EQ EQ EN EN SE SE SEAC AC AC AC AC AC AC ACO EQUIP E MEN SEACO EQUIPMEN A EQU EQU AC
More informationAnti-Backlash Life. Without Kerkote TFE Coating inch / (cm) 5 to 10 million (12 to 25 million) With Kerkote TFE
Lead Screw and Nut ssemblies NTG Nut Series ompact size, zero backlash, minimal drag torque. The adjustable NTG Series offers a cost effective anti-backlash assembly for applications requiring precise
More informationTPVT 1200 BTB. Variable Displacement Axial Piston Pumps CONTENTS. General Information. Installation Instructions. Technical Specifications 6-7
CONTENTS General Information Installation Instructions Technical Specifications Tandem Pump Installation Drawings Hydraulic Diagrams Rear Pump Mounting Flanges Mounting Shaft and Shaft Details Control
More informationTQ series. Low-backlash gearboxes
TQ series Low-backlash gearboxes SUMMARY 1 General information... 1.1 Symbols, units and definitions... 1.2 Selecting the gear unit... 4 1. Service life of bearings... 6 2 Features of TQ series... 8 Ordering
More informationSet screw mounted ball bearings
Features/Benefits For over 70 years, Dodge has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art
More informationThe steering column is only available as a complete unit, without steering lock housing, as a replacement part.
Page 1 of 17 Volkswagen > New Beetle > 1998-2005 Suspension, wheels, steering 48 - Steering column Steering column, removing and installing Special tools, testers and auxiliary items required Torque wrench
More informationInstallation and Operating Instructions for ROBA -ES couplings Type 940. _. _ Sizes 14-48
Table of contents: Please read and observe this Operating Instruction carefully. A possible malfunction or failure of the clutch and damage may be caused by not observing it. Page 1: - Table of contents
More informationFAN & BLOWER CENTRIFUGAL FANS
FAN & BLOWR CNTRIFUGAL FANS INTRODUCTION GNRAL PRODUCT RANG FANS BY FANTCH - INTRACTIV PRODUCT SUIT SLCTION PROGRAM PRFORMANC CONSTRUCTION The Fan & Blower range of centrifugal fans is marketed to the
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 14691 First edition 1999-11-01 Petroleum and natural gas industries Flexible couplings for mechanical power transmission General purpose applications Industries du pétrole et
More informationNOISE AND VIBRATION SOLUTIONS FOR HVAC
br m..co ral ma g w. ww NOISE AND VIBRATION SOLUTIONS FOR HVAC 2 SOLVING VIBRATION PROBLEMS ON HVAC SINCE 1969 Factory 1 Factory 2 Since 1969 AMC-MECANOCAUCHO has pioneered the manufacture and design of
More informationNovenco axial flow fans. ZerAx - Standard January 2010
Novenco axial flow fans ZerAx - Standard January 2010 Product facts Product The Novenco ZerAx series of axial flow fans uses innovative design to reduce power consumption by improving efficiency. As an
More informationDenison GOLD CUP Product Catalog Piston Pumps & Motors For Open & Closed Circuits
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Denison GOLD CUP Product Catalog Piston Pumps & Motors For Open & Closed
More informationINDUSTRY PROCESS AND AUTOMATION SOLUTIONS TECNOINGRANAGGI
INDUSTRY PROCESS AND AUTOMATION SOUTIONS TECNOINGRANAGGI MP SUMMARY Chapter Contents 1 General information...2 1.1 Symbols and units of measurement...2 1.2 Features of MP series...3 1.3 Versions...4 1.4
More informationVibration Control Technology Industry. Catalogue 2012
Viration Control Technology Industry Catalogue 212 The information in this product catalogue is ased on the experience gained in decades of research on the development and manufacture of components for
More informationSeries BNSH/BNSHA. Round, without/with bolt-on floor attachment. BNSH / BNSHA BNSHA DIMENSION BASE PLATE BNSH
20 Leveling mounts Bilz leveling mounts are used for machine installations where vibration and structureborne noise isolation is needed. The maintenance-free machine mounts guarantee the simple and precise
More informationNew mounts : VIBSOL Cushions for pipe Adjustable height machinery mount V47 METAL MOUNTINGS VIBRACHOC RANGE
New mounts : VIBSOL Cushions for pipe Adjustable height machinery mount V47 METAL MOUNTINGS VIBRACHOC RANGE METAL MOUNTINGS VIBRACHOC RANGE CONTENTS I STEEL MOUNTINGS II VIBRATION AND SHOCK GENERAL III
More informationLoaded Car Hunting and Suspension Systems
Loaded Car Hunting Mechanical Association Railcar Technical Services Loaded Car Hunting and Suspension Systems 18 September 2009 Jay P. Monaco Vice President Engineering Amsted Rail Company, Inc. Loaded
More informationMARITIME AFTERNOON. Torben Ole Andersen. June 14, 2017 Aalborg University, Denmark
MARITIME AFTERNOON HYDRAULICS Torben Ole Andersen June 14, 2017 Aalborg University, Denmark Agenda Marine Propellers Digital Hydraulics in a Hydraulic Winch Secondary Control in of Multi -Chamber Cylinders
More informationBACKLASH FREE AND STANDARD JAW COUPLING
BACKLASH FREE AND STANDARD JAW COUPLING Up to 9.600 Nm of torque and 130 mm bore GAS/SG e GAS 25 Technology for Safety 10-2018 GAS/SG-ST - backlash free jaw coupling «in steel»: introduction Made in steel
More informationPower Supply EL
General information: EL610-2412-24 with dual outputs has been specifically developed to meet the DC powering requirements for telecommunications, industrial and marine applications. The unit has a 230Vac,
More informationDYNAFLEX ELASTOMERIC FLEXIBLE COUPLINGS. Dynaflex Elastomeric Flexible Couplings.
Page 87 of 124 Powertrain component life is determined by the load spectrum each component will experience during the machine s service life. Reciprocating engines, such as spark-ignited gasoline and compression-ignited
More informationHubbell Marine Isolation Transformers 15 kva and 25 kva Models
Shore Power System 15 kva and 25 kva Models Protects Sensitive Equipment on Board Virtually Eliminates Potential for In-Water Stray Current Can be wired per ABYC E-11 for either a Polarization or Isolation
More informationC E NTA P OWER T R A NSMISSIO N CENTASTART-V C E N TA S TA RT-V ENGL ISH. Is this PDF up to date? click here for an update check!
C E N TA S TA RT-V-- 05-17 C E NTA P OWER T R A NSMISSIO N ENGL ISH Is this PDF up to date? click here for an update check! Questions on product selection? We will gladly assist www.centa.info/contact
More informationSIZES FROM 1,950-25,000 Nm BACKLASH FREE ELASTIC JAW COUPLINGS
K Z SIZS FROM 1,950-25,000 Nm BCKLSH FR LSTIC JW COUPLINGS LSTOMR COUPLINGS K Z Optional: GNRL INFORMTION BOUT R+W LSTOMR COUPLINGS: SRVIC LIF When properly selected, handled, and installed, these couplings
More informationTPV 4000 (EX 28-41) Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE TRANSMISSION LINE OF HANSA-TMP HT 16 / M / 280 / 1008 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M.L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:
More informationSPMM OUTLINE SPECIFICATION - SP20016 issue 2 WHAT IS THE SPMM 5000?
SPMM 5000 OUTLINE SPECIFICATION - SP20016 issue 2 WHAT IS THE SPMM 5000? The Suspension Parameter Measuring Machine (SPMM) is designed to measure the quasi-static suspension characteristics that are important
More informationANTI-VIBRATION MOUNTS
SECTION 21 - ANTI-VIBRATION MOUNTS ANTI-VIBRATION MOUNTS Male/Male Thread Anti-Vibration Mount... 21-1 Male/Female Thread Anti-Vibration Mount... 21-2 Female/Female Thread Anti-Vibration Mount... 21-3
More information3 - Protection components Motor circuit-breakers
Contents 0 - Protection components Motor circuit-breakers protection components for the motor protection Thermal-magnetic motor circuit-breakers Selection guide..............................................page
More informationPRODUCT CATALOGUE DOUBLE UNIVERSAL JOINT (DUJ) SHAFTS
PRODUCT CATALOGUE DOUBLE UNIVERSAL JOINT (DUJ) SHAFTS For driven steering axles, marine stern drive and special applications CONTENT DRIVESHAFTS PRODUCT RANGE 3 B-SERIES 4 T-SERIES 5 M-SERIES 6 ENGINEERING/TEST
More informationLightweight. Geislinger Gesilco
Lightweight Geislinger Gesilco The Geislinger Gesilco product range is based on more than 20 years of experience in developing fibre composite couplings and shafts. The maintenance-free composite membranes
More informationTable of content. Exhaust equipment. Shock mountings. Cable mountings. Sandwich mountings
Table of content Exhaust equipment 1.1 Shock elements for exhaust systems Page 2 1.2 Shock absorbing stabilizers RD1 Page 3 1.3 Shock absorbing stabilizers RD2 Page 4 1.4 Shock mounting type RDS-B Page
More informationPower Supply EL
General information: EL630-1203-7 has been specifically developed to meet the DC powering requirements for telecommunications, industrial and marine applications. The output is current limited, with short
More informationHOLLOW SPRINGS. BATEGU Gummitechnologie GmbH & Co KG 1190 Vienna, Muthgasse 22 Austria
HOLLOW SPRINGS BATEGU Gummitechnologie GmbH & Co KG 1190 Vienna, Muthgasse 22 Austria T. +43 (1) 368 21 53-0 F. + 43 (1) 368 21 53-24 office@bategu.at www.bategu.at Properties: Due to their spherical shape,
More informationRenold Hi-Tec -kytkimet
Solutions for power transmission Renold Hi-Tec -kytkimet www.konaflex.fi General atalogue The complete solution Renold Hi-Tec ouplings has been a world leader in the design and manufacture of flexible
More informationJaw Couplings REK DQO
Jaw s REK DQO elastic for dynamic applications with radially mountable elastomer cushions 40-1 Features s up to 169 000 Nm Compensation of axial, radial and angular misalignments Adsorbs vibrations Progressive
More informationTYPE TSC/TLC T SERIES FLEXIBLE DISC COUPLINGS
TYPE TSC/TLC A Stainless steel flexible discs B Overload collars C Cartridge transmission unit D Anti-fly feature E Anti-corrosion treatment F Hubs with API puller holes G Robust hub bolt H Large shaft
More information