Technical Data : Motor output : 0.65 kw. Max. delivery rate : 2.0 l/min Max. nozzle size : (0.584 mm)

Transcription

1

2 Wagner Contractor PROSPRAY PS3.21 Motor output : 0.65 kw Voltage : 230V/50Hz : 16 kg Max. delivery rate : 2.0 l/min Max. nozzle size : (0.584 mm) Standard Package : Airless gun AG 08 WG PS3.21 SKID 230V, EXPORT Coating Materials : Release agents, Undercoats and primers, Fillers, Synthetic resin-based Paints, Acrylic paints, Anti-corrosive agents, 2K Materials, Emulsions, Latex paints, Flame retardants, Fabric adhesive, Airless fillers Doors, Frames, Windows, Radiators, Steel structures, Wall and ceiling, Interior finishing, Protective Coating and Objects ProSpray 3.21 basic unit on stand HP hose DN6, 27 MPa, 1/4, 15 m, yellow Airless gun AG 08, 25 MPa, incl. TradeTip 3 nozzle holder 2SpeedTip nozzle D10 111/419 PROSPRAY PS3.34 WG PS3.34 HR, 230V, EXPORT HEAVYCOAT HC950E Motor output : 0.94 kw Voltage : 230V/50Hz : 43 kg Max. delivery rate : 4.5 l/min Max. nozzle size (1 gun) : (0.863 mm) Max. nozzle size (2 guns) : (0.584 mm) Coating Materials : Release agents, Undercoats and primers, Fillers, Synthetic resin-based Paints, Acrylic paints, Anti-corrosive agents, 2K Materials, Emulsions, Latex paints, Flame retardants, Fabric adhesive, Airless fillers Doors, Frames, Windows, Radiators, Steel structures, Wall and ceiling, Interior finishing, Protective Coating and Objects Standard Package : Airless gun AG 08 ProSpray 3.34 basic unit on trolley HP hose DN6, 27 MPa, 1/4, 15 m, yellow Airless gun AG 08, 25 Mpa, incl. TradeTip 3 nozzle holder 2SpeedTip nozzle D20 115/421 Motor output : 3.6 kw Voltage : 230 V : 83 kg Max. Pressure : 25 MPa Max. delivery rate : 6.6 l/min Max. nozzle size : Airless gun AG 14 Standard Package : HEAVYCOAT HC950E *Convertokit, 4.8 Hp, Honda, gasoline A HeavyCoat V, basic unit HP hose DN10, 25 MPa, 3/8, 15 m Connector I = 1/4 x A = 3/8 Airless gun AG 14, NPS 1/4, incl. TradeTip 3 Nozzle holder, F-thread Coating Materials & Indoor : Large interior wall surfaces requiring a high level of productivity and surface coverage power: e.g. primers, latex paints, emulsions and all other water diluted and solvent based materials, Application of fillers (airless spray fillers) and Flame proofing. Outdoors : Exterior wall surfaces, Roof coatings, Thick coating materials, Bituminous paints Corrosion proofing, Inorganic zinc and micaceous iron paints, Basement sealants. Others : Fabric and other adhesives.

3 Wagner Contractor PLASTCOAT PC 25 Coating Materials : Synthetic resin / plasters onto concrete, Coarse fibre paints, Porous concrete coatings Resins and fillers, Roller and filling render, Bitumen sealer, Synthetic resin / reinforcement filler & plasters, Synthetic resin plasters up to K4 / K5, Bonded thermal insulation system adhesive / filler, Renovation plaster, Mineral renders, Reinforcing stopper Indoor : Smoothing the surfaces of ceilings and brickworks, Rendering ceilings and wall surfaces in rooms and stairways and Applying spray plaster. Outdoor : Thermal insulation work, Concrete restoration and water-proofing work and Brickwork restoration. WG PC25 PLASTCOAT S PACK W/O COMP Motor rating : 2,2 kw Voltage : 230V/50Hz Max. delivery rate : 10/15/20 l/min* Max. delivery radius : 40 m Delivery height : 20 m : 85 kg Max. grain size : 5 mm Working pressure : 40 bar Pump casing W10/3, yellow Pump worm W10/3, Ø = 40 mm, L = 320 mm Tool box complete for PlastCoat LINECOAT LC 840 Engine rating Max. delivery rate Max. Spraying Speed Max.nozzle size Line Width Electrical System Pump drive : 4 kw / 5,5 PS : 8.2 l/min : 188 m/min (11.3 km/h) : 1 gun (1.219 mm) 2 guns (0.838 mm) : 5 up to 60 cm : 111 kg : 50 W / 12 V : Hydraulic Max. dynamic pressure : 23 MPa (230 bar) Max. delivery rate : 8.2 l/min Airless gun AG 08, special 2nd gun connection complete HP hose DN6, 27 MPa, 1/4, 15 m, yellow TradeTip 2 nozzle holder TradeTip 2 nozzle LineFinish 1708 WG LC840 LINE COAT SPRAY PACK Making, remaking and maintaining lines and markings Communal areas : Roads, Parking areas, Sports areas, Airports and Storage halls

4 Wagner Industrial Powder MANUAL EPG-SPRINT X1 WITH 60L CONTAINER Dimensions : Width : 595 mm Height : 1120 mm Depth : 740 mm approx. : 38 kg Pneumatic : Air inlet Pressure range : 6 to 8 bar, Air quantity max. 20 m3/h Injector PI-F1 Feeding and dosage air : 2 up to 12 m3/h Atomization : 0.05 to 4.5 m3/h Compressed air : 6 bar Electrical : Network Frequency Power input max. High voltage max. Corona current limit Tribo current limit max. :12 μa Valve control voltage : 24 VDC : 85 VAC to 250 VAC : 47 Hz to 440 Hz : 25 Watt :100 kv : 5 μa to 120 μa (adjustable) Controler EPG Sprint X Mains cable + Stak 200 Earthing cable assy. 10m Manual Spray Gun PEM-X1 Flat Powder injector PI-F1 Earthing flex Union with push in nipple Coupling union Powder hose set D11, 5m Trolley Front Caster Set Field of application/remarks : Standard level (red) : For poorly rechargeable types of powder, For high powder application, For high application effectiveness., This setting corresponds to the usual Wagner high-voltage modules and control units. Medium level (blue) : For small surfaces, For well rechargeable types of powder, For metal powder, To reduce the effects of overcoating such as craters and orange peel, Increasing the open-circuit voltage allows for a greater distance between the spray gun and the workpiece while maintaining sufficient powder charging. Soft level (black) : For very well rechargeable types of powder. For small powder application and For post-coatings PRIMA SPRINT X1 WITH CONTAINER 60LT Manual Prima Sprint X1 Container 60ltr MANUAL PRIMA SPRINT X1 F-60LT WG CONTAINER 60LTR POWDER SET MANUAL SPRAYPACK EPG SPRINT X1 Technical data PEM-X1 : Length : 335 mm/ 13 inch : 490 g/ 17 oz ATEX-Certification : PTB 12 ATEX 5002 EN Powder output : 450 g (16 oz) /min. The advantages at a glance: Highest precision because of WAGNER Air Flow Control (AFC) Intuitive use Intelligent control technology Up to 50 coating programs for highest quality and reproducibility Logical arrangement of the different control parts Technical data EPG-Sprint X : Length : 270 x 260 x 136 mm (10.6 x 10.2 x 5.3 in.) : 4,6 kg Type : 0102 II 3(2) D IP ATEX-Certification : PTB 102 II D T (Zone 4) The advantages at a glance: Lightweight with only 490g Well-balanced ergonomics Integrated remote control for quick adjustment of the powder amount New nozzle concept with a sliding ring for perfect adjustable powder spray pattern Changed colour schema Controler EPG Sprint X Mains cable + Stak 200 Earthing cable assy. 10m Manual Spray Gun PEM-X1 Flat Powder injector PI-F1 Earthing flex Union with push in nipple Coupling union Powder hose set D11, 5m COMPONEN PRIMA SPRINT X1 F

5 Wagner Industrial Liquid COBRA HIGH-PRESSURE DIAPHRAGM PUMPS Pump ratio : 40 :1 Material inlet : M M 36x2 Material outlet : M G 3/8 Material temperature : C, F Air inlet pressure : 2,5 6,0 bar, PSI Max. material pressure at pump inlet : 20 bar, 290 PSI Air inlet connection : F G 1/2 Operating pressure : 250 bar, 3626 PSI Volumetric flow per double stroke : 10 cm³/ds, 0,61 in³/dh Ambient temperature : C, F : 19,0 kg, 41.9 lb Max. sound level : 74 db(a) Material ph : 3,5 9,0 ph Max. stroke rate : 200 DS/min Wood, Woodworking industry, Furniture industry and Kitchen industry WG COBRA AIRCOAT Standard Package : GM 4100AC GM 4100AC 25MPa NPSM1/4 Cobra on base frame Hopper 5L-Cobra AC hose DN4-PN270-1/4 NPS-7,5m-PA-T Filter pressure regulator cpl. nipple so Brass fitting reducer adapter 3/8 male npt to 1/4 male npt (1EA) COBRA HIGH-PRESSURE DIAPHRAGM PUMPS Pump ratio : 40 :1 Max. material pressure at pump inlet : 20 bar, 290 PSI Material inlet : M M 36x2 Material outlet : M G 3/8 Operating pressure : 250 bar, 3626 PSI Volumetric flow per double stroke : 25 cm³/ds, 1,53 in³/dh Material temperature : C, F Air inlet pressure : 2,5 6,3 bar, PSI Wood, Woodworking industry, Furniture industry and Kitchen industry Max. stroke rate : 200 DS/min Ambient temperature : C, F : 32,0 kg, 70.6 lb Max. sound level : 76 db(a) Material ph : 3,5 9,0 ph Min. air inlet : Ø 19 mm, 0.7 in Air inlet connection : F G 1/2 Cobra AC-regulatorr-kit BigCobra FILTER M28x1,5 WG COBRA Recommended Guns Package : AirLess (WG ) AirCoat ( ) Electrostatic (WG ) Airless gun AG 14 GM 4100AC Set GM 5000EAC VC - VM 5000 Airless gun AG 14, NPS 1/4, include TradeTip 3 nozzle holder, F-thread Hp hose dn4 pn270 1/4nps 6,8m pa Nozzle (as recommended) GM 4100ac - 25mpa lv red AC hose dn4 pn720-1/4 nps-7.5m Filter regulator mtl guard1/4in kw /4 Npt brass male double nipple external thread (4EA) 1/4 Npt brass female double nipple internal thread (2EA) GM 5000EAC VM 5000 GM 5000EAC Nozzle ACF /40 Air cap ACF LV (red) Hose package GM 5000EAC (7.5m) Controler VM 5000 Mounting control unit assy Filter regulator mtl guard1/4in kw /4 Npt brass male double nipple external thread (4EA) 1/4 Npt brass female double nipple internal thread (4EA)

6 Wagner Industrial Liquid PUMA HIGH-PRESSURE PISTON PUMPS Furniture industry, Kitchen manufacturers, Joinery, Window factories, Steel fabrication and Construction of vehicles Pump ratio : 28 :1 Max. stroke rate : 60 DS/minComponent product : Material inlet : M M 36x2 Material outlet : M M 24x1,5 Material ph : ph Allowable inclination : ±10 : 16,0 kg, 35.3 lb Air inlet pressure : 2,5 8,0 bar, PSI Sound level at : 6 bar air pressure 74 db(a) Operating pressure : 224 bar, 3249 PSI Volumetric flow per double stroke : 40 cm³/ds, 2,44 in³/dh Volumetric flow per : 60 DH 2.4 l/min Material temperature : 5-80 C, F Ambient temperature : 5 60 C, F Max. material pressure at pump inlet : 20 bar, 290 PSI Piston P. Puma Trolley 4 assy. Suction hose DN25-SSt assy. HP-filter DN12-PN530-SSt kpl. Return Pipe DN6-G1/4-100mm-PA Brass fitting reducer adapter 3/8 male npt to 1/4 male npt (1EA) WG SPRAY PACK PUMA TROLLEY PUMA AIRCOAT Package : PistonP. Puma Trolley 4 assy. Suction hose DN25-SSt assy. HP-filter DN12-PN530-SSt kpl. Return Pipe DN6-G1/4-100mm-PA AirCoat regulator assy. GM 4100AC 25MPa NPSM1/4 Air cap LV plus (red / GM 4x00AC) AC-hose-DN4-PN270-1/4 NPS-7,5m-PA-T Fitting-RF-FM-G1/4-NPS1/4-PN530-SSt assy Hose Sleeve Nozzle ACF /40 Brass fitting reducer adapter 3/8 male npt to 1/4 male npt (1EA) GM 4100AC WG PUMA SPRAY-P A-CT GM4100AC AirLess (WG ) Recommended Guns Package : Electrostatic (WG ) Airless gun AG 14, NPS 1/4, incl. TradeTip 3 nozzle holder, F-thread Hp hose dn4 pn270 1/4nps 6,8m pa Nozzle (as recommended) GM 5000EAC Set GM 5000EAC VC - VM 5000 GM 5000EAC Nozzle ACF /40 Air cap ACF LV (red) Hose package GM 5000EAC (7.5m) Controler VM 5000 Mounting control unit assy Filter-regulator mtl guard1/4in kw /4 Npt brass male double nipple external thread (4EA) 1/4 Npt brass female double nipple internal thread (2EA)

7 Wagner Industrial Liquid ZIP52 LOW PRESSURE DIAPHGRAM PUMP Pressure ratio : 1 : 1 Operating pressure : 8 bar, 116 PSI Volumetric flow per double stroke : 108 cm³/ds, 6,59 in³/dh Volumetric flow with free drainage : 52 l/min, 1,8 cfm, 13.7Gpm Max. suction lift : 4.9 m, 16.1 ft Particle size : 2 mm, 0.08 in Air inlet pressure : 1,0 8,0 bar, PSI Material temperature : 4-90 C, F Material inlet : G 1/2 Air inlet connection : G 1/4 Woodworking industry, Furniture industry, Metal Industry and Kitchen industry Recommended Guns Package : Processable materials : Water & solvent-based coatings Abrasive materials Metallic paints Release agents Adhesive Optional Trolley * WG U760.00ZIP52 FINISHING DIAPH PUMP * WG TROLLEY FOR ZIP52 GM 5000EA VM 5000 Electrostatic AirSpray (WG ) GM 5000EA Nozzle AF mm Air cap AF W Hose package GM 5000EA (7.5m) Controler VM 5000 Mounting control unit assy LEOPARD HIGH-PRESSURE PISTON PUMPS Airless gun AG 14 Pump ratio : 35 :1 Volumetric flow per : 60 DH 4.2 l/min Max. stroke rate : 60 DS/min Material inlet M M : 36x2 Material outlet M M : 24x1,5 Material ph : ph Allowable inclination : ±10 : 26,0 kg, 57.3 lb AirLess Package SP Leopard35-70 AG14AL PistonP. Leopard Trolley 6 assy. Suction hose DN25-SSt assy. HP-filter DN10-PN270-SSt kpl. Gun AG-14 f-thread 11/16 NPS1/4 HP-Hose-DN6-PN270-¼ NPS-10,0m-PA Fitting-RF-FM-G1/4-NPS1/4-PN530-SSt assy Brass fitting reducer adapter 1/2 male npt to 1/4 male npt (1EA) Furniture industry, Kitchen manufacturers, WG SPRAY PACK LEOPARD Joinery, Window factories, Steel fabrication and AL/ CPL Construction Airless gun of vehicles AG 14 VM 5000 Operating pressure : 250 bar, 3626 PSI Volumetric flow per double stroke : 70 cm³/ds, 4,27 in³/dh Air inlet pressure : 2,5 7,1 bar, PSI Sound level at : 6 bar air pressure 74 db(a) Material temperature : 5-80 C, F Ambient temperature : 5 60 C, F Max. material pressure at pump inlet : 20 bar, 290 PSI Recommended Guns Package : Electrostatic (WG ) VM 5000 GM 5000EAC GM 5000EAC Set GM 5000EAC VC - VM 5000 Nozzle ACF /40 Air cap ACF LV (red) Hose package GM 5000EAC (7.5m) Controler VM 5000 Mounting control unit assy Filter regulator mtl guard1/4in kw /4 Npt brass male double nipple external thread (4EA) 1/4 Npt brass female double nipple internal thread (2EA)

8 Wagner Industrial Liquid LEOPARD HIGH-PRESSURE PISTON PUMPS Pump ratio : 35 :1 Volumetric flow per : 60 DH 4.2 l/min Max. stroke rate : 60 DS/min Material inlet M M : 36x2 Material outlet M M : 24x1,5 Material ph : ph Allowable inclination : ±10 : 26,0 kg, 57.3 lb AirCoat Package Operating pressure : 250 bar, 3626 PSI Volumetric flow per double stroke : 70 cm³/ds, 4,27 in³/dh Air inlet pressure : 2,5 7,1 bar, PSI Sound level at : 6 bar air pressure 74 db(a) Material temperature : 5-80 C, F Ambient temperature : 5 60 C, F Max. material pressure at pump inlet : 20 bar, 290 PSI Recommended Guns Package : Electrostatic (WG ) GM 4100AC VM 5000 GM 5000EAC Furniture industry, Kitchen manufacturers, Joinery, Window factories, Steel fabrication and Construction of vehicles WG SPRAYPACK LEOPARD 35-70S AIR WAGNER piston pump Leopard NPS Filter-pressure regulator cpl. HP-filter HPF-3 Return tube HPF Flex suction hose DN25-M36x2-E90 Hose Package AC mat. DN4; air DN6; 7.5m GM 4100AC 25MPa NPSM1/4 Nozzle ACF /40 Air cap LV plus (red / GM 4x00AC) BRASS FITTING REDUCER ADAPTER 1/2 MALE NPT TO 1/4 MALE NPT (1EA) Set GM 5000EAC VC - VM 5000 GM 5000EAC Nozzle ACF /40 Air cap ACF LV (red) Hose package GM 5000EAC (7.5m) Controler VM 5000 Mounting control unit assy Filter-regulator mtl guard1/4in kw /4 Npt brass male double nipple external thread (4ea) 1/4 Npt brass female double nipple internal thread (2ea) JAGUAR HIGH-PRESSURE PISTON PUMPS Pump ratio : 75 :1 Operating pressure : 530 bar, 7687 PSI : 53,0 kg, lb Max. stroke rate : 60 DS/min Material inlet : F G 1 1/2 Material outlet : M M 24x1,5 Material ph : ph Allowable inclination : ±10 Volumetric flow per double stroke :150 cm³/ds, 9,15 in³/dh Volumetric flow per : 60 DH 9 l/min Air inlet pressure : 2,5 7,1 bar, PSI Sound level at : 6 bar air pressure 81 db(a) Material temperature : 5-80 C, F Ambient temperature : 5 60 C, F Max. material pressure at pump inlet : 20 bar, 290 PSI Steel fabrication, Construction of vehicles and Offshore AirLess Package with Gun G-15 Wagner piston pump Jaguar HP-filter HPF-3 Return tube HPF Flex suction hose DN25-M36x2-E90 HP-Hose-DN10-NP530; 15m Gun G 15 WAGNER Profi Tip HP F reversing switch HP-Hose-DN6-NP530; 1,5m Nozzle Wagner Profi Tip HP 521 Trolley heavy duty Leopard/Jaguar Brass fitting reducer adapter 1 male npt to 1/2 male npt WG SPRAY PACK JAGUAR AL/CART Gun G 15

9 Product Range DESC (Digital Electronic Spray Control), is a new generation of electronic controls. With the digital display you can view the current pressure, call up pre-defined pressure options and display material consumed in litres. Furthermore, these devices contain all the advantages of the reliable WAGNER Spray Control Systems. PROSPRAY PISTON PUMPS Technical data PS 3.20 PS 3.21 PS 3.23 PS 3.25 PS 3.29 PS 3.31 PS 3.34 PS 3.39 Motor output 1.00 kw 1.03 kw 1.03 kw 1.10 kw 1.72 kw 1.84 kw 1.95 kw 1.65 kw Voltage 230 V / 50 Hz Weight 13,6 kg 13,6 kg 16 kg 25,5 kg 38 kg 38 kg 43 kg 44 kg Max. delivery rate 1.6 l/min 2.0 l/min 2.3 l/min 2.6 l/min 3.0 l/min 3.8 l/min 4.5 l/min 5.0 l/min Max. nozzle size The patented SSP-System (Special Spray Power) is an unique WAGNER development. The special design ensures that the drawing piston continuously fills the pump with a sufficient amount of material - a big advantage when it comes to processing airless spray joint filler, adhesives and bituminous coatings. A specially developed cleaning adaptor, provides quick cleaning of the pump unit. HEAVYCOAT PISTON PUMPS Technical data HC 950 E (+ SSP) HC 950 G (+SSP) HC 970 E (+ SSP) HC 970 E(+ SSP) Motor output 3.6 kw 4.1 kw 5.5 kw 6.0 kw Voltage 230 V Weight 83 kg (84.5 kg SSP) 76 kg 100 kg (103 kg SSP) 88 kg Max. pressure 25 MPa 25 MPa 25 MPa 2.6 l/min Max. delivery rate Unique: A performance capability of 0-12 l/min and ability to handle materials with a grain size up to 3 mm make the PC 830 the perfect partner on the building site. PLASTCOAT PLASTER SPRAYING SYSTEMS Technical data PC 430 PC 830 PC 25 PC 35 Motor output 1.8 kw 1.8 kw 2.2 kw 3.6 kw Voltage 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 400 V / 50 Hz Max. delivery rate 12 l/min 12 l/min 10/15/20 l/min1 10/15/20 l/min 2 Max. delivery radius 30 m 30 m 40 m 50 m Delivery head 20 m 20 m 20 m 30 m Weight 38 kg 38 kg 85 kg 87 kg Max. grain size 3 mm 3 mm 5 mm 5 mm Operating pressure max. 4 MPa

10 Product Range For maximum precision and precise adjustment the gun can be locked in the desired position. The setting is also retained for template work and other Airless jobs. The gun can be removed from the carrier without tools. LINECOAT MARKING SYSTEMS Technical data LC 800 LC 820 LC 840 LC 860 Motor output 3.0 kw / 4 PS (Subaru) 3.0 kw / 4 PS (Honda) 4 kw / 5.5 PS (Honda) 4 kw / 5.5 PS (Honda) Weight 63 kg 107 kg 111 kg 116 kg Pump drive gas driven Max. pressure 23 MPa Max. delivery rate 3.2 l/min 4.9 l/min 6.4 l/min 8.8 l/min Max. spraying speed 127 m/min (7.62 km/h) 161 m/min (9.7 km/h) 188 m/min (11.3 km/h) 215 m/min (12.9 km/h) Max. nozzle size 1 gun Max. nozzle size 2 guns Line thickness 5 to 60 cm ICEBREAKER SELECTION TABLE Piston pump Wildcat Puma Puma Wildcat Leopard Puma Pump ratio 10 : 1 15 : 1 15 : 1 18 : 1 18 : 1 28 : 1 Max. working pressure [bar] Double-stroke volume [cm/ds] Max. delivery rate [cm/ds] Air pressure (min/max) [bar] 1.5/ / / / / /7.7 Air supply internal thread G 1/2 Material inlet external thread M 36 x 2 Material outlet external thread 3/8 NPS 3/8 NPS 3/8 NPS 3/8 NPS 3/4 NPS 3/8 NPS Packing material Standard Alternative Max. number of guns Nozzle 0,009 > 6 > Max. number of guns Nozzle 0, > 6 2 Max. number of guns Nozzle 0, > 6 Piston pump Leopard Leopard Jaguar Leopard Jaguar Tiger Pump ratio 35 : 1 35 : 1 38 : 1 18 : 1 18 : 1 28 : 1 Max. working pressure [bar] Double-stroke volume [cm/ds] Max. delivery rate [cm/ds] Air pressure (min/max) [bar] 1.5/ / / / / /7.7 Air supply internal thread G 1/2 G 1/2 G 1 G 1/2 G 1 G 1 Material inlet external thread M 36 x 2 Material outlet external thread 3/8 NPS 3/8 NPS 3/4 NPS 3/8 NPS 3/8 NPS 3/4 NPS Packing material Standard Alternative Max. number of guns Nozzle 0,009 > Max. number of guns Nozzle 0,013 4 > 6 > 6 6 > 6 > 6 Max. number of guns Nozzle 0, > PE/L PE/L PE/L

11 Technical Data Product Exceptional attributes Outstanding durability, very high reliability and unique features make the IceBreaker the optimal choice for almost any high pressure application. High e ciency air motors ensure smooth operation and impeccable coating results. The wide pump range enables the unit to successfully meet the needs of small workshops that coat window frames or wood cabinets, as well as those of big industries that produce industrial vehicles or huge wind energy towers. They are ideal for applying water- and solvent-borne paints. 1 Reliable The unique internal design of the motor and its special discharge valves drastically reduce ice formation and prevent accumulation to ensure superior performance and exceptional reliability. 2 Under full pressure The packing-free, anti-stalling pilot valve is always fed by full air pressure, regardless of the adjusted working pressure, to guarantee high speed inversions and optimal performance. 3 Safe operation The pressure regulator is integrated with a safety air valve to ensure, when it is closed, that no pressure is left in the air motor 4 Service friendly The release agent cup is easily accessible. The quickrelease coupling between the piston rod and air motor makes it possible to quickly and easily disconnect the fluid section. 5 Filtration and Recirculation The large easy-to-clean material lter combined with the recirculation valve creates maximum performance in cleaning and ushing. 6 Performance and durability Self-adjusting packings and a thick hard chrome plated stainless steel uid section ensures durability regardless of the material used. 7 Easy and long lasting The large ball valve with hard metal seats ensures a strong suction power and an extremely long working life. Easily opened for cleaning without disassembling the uid section. The suction hose moves freely on a swivel joint.

12 TradeTip 3 nozzles perfect and long-life The nozzle core determines the coating results because the material passes through it and is transformed into a spray. TradeTip 3 nozzles are extremly persistent: The innovative nozzle bore and the carbid alloy reduce wear-out and enable a constant spray angle. An other advantage is that the nozzle is very easy to clean: just twist and rinse - without any tools. The nozzle angle determines the width of the spray pattern, in the example 50 : Angle 50 Spray width 225 mm 300 mm The ideal distance to the object is approx. 300 mm. The bore diameter (in this example: inch) determines the flow volume and thus the amount of paint to be applied. In set: When purchasing a TradeTip 3 nozzle you will get a matching gun filter and a double seal for free. Nozzle extensions (with nozzle holder, without nozzle) G-thread Nozzle extension complete 15 cm Nozzle extension complete 30 cm Nozzle extension complete 45 cm Nozzle extension complete 60 cm Injection lance Injection lance, 40 MPa 11/