CDS/CDSV/CDS mm
|
|
|
- Virgil Banks
- 5 years ago
- Views:
Transcription
1 Valves of stainless steel COMPACT-Program SUT-O VALVES, STAINLESS STEEL (with through-going valve plate) CDS/CDSV/CDSR Shut-Off-Valves mm with through-going valve p GO WIT OUR LOW Valves of stainless steel COMPACT-Program CDS/CDSV/CDS mm C D MARTIN LOSE Gmb Unteres Paradies 63 D eidenheim Postfach 1565 D eidenheim server.ab@lohse-gmbh.de MARTIN LOSE Gmb Unteres Paradies 63 D eidenheim Postfach 1565 D eidenheim PA VENTILER AB Sagbäcksvägen 3B, Lindome Tel ax info@paventiler.se paventiler.se
2 GO WIT OUR LOW Valves Applications of stainless steel COMPACT-Program chemical industry Paper industry pulp and paper production LOSE stock valves with through-going slide plate have been successfully tested thousands of times in all areas of the pulp and paper industry. Valve types CDS and CDSV are installed of shut-off valves for pulp with a high degree of contamination, owing to their absolutely smooth, pocket-free passage. Chemical industry and food industry LOSE stock valves with through-going slide plate special execution with sealings suitable for foodstuffs are used as shut-off valves and regulating valves for viscous, pulverulant, granular and sticky substances. food industry Waste treatment plants LOSE stock valves with through-going slide plate can be found in waste treatment plants for the shutting off of viscous and aggressive substances. waste technology Special valves On request we can supply specially designed valves of the most varied materials (e. g. titan) for special fields of application. Media high proportion of reject parts granular material and powders high-viscosity media MARTIN LOSE Gmb Unteres Paradies 63 D eidenheim Postfach 1565 D eidenheim server.ab@lohse-gmbh.de PA VENTILER AB Sagbäcksvägen 3B, Lindome Tel ax info@paventiler.se paventiler.se
3 GO WIT OUR LOW Valves Construction of stainless steel COMPACT-Program ousing entirely of stainless steel corrosion and acid resistant easy to maintain the handwheel support also serves as a mounting for any control apparatus and protection guard Slide cups of special plastic abrasion resistant excellent anti-friction properties temperature resistant acid resistant easily replaceable Valve plate of stainless steel corrosion and acid resistant type CDSV has a hardened valve plate bare cross section = nominal diameter of piping no stringing of fibres is possible free of dead space in open position 100 % water-tight in both directions seals resistant to temperature and acids seals easily replaceable but firmly anchored in the valve housing Leak test according to DIN EN : Table A5, test medium liquid, leakage rate A Actuating elements in well-proved LOSE modular system interchangeable an all valves of our make also interchangeable on the incorporated existing valve reduced stock holding MARTIN LOSE Gmb Unteres Paradies 63 D eidenheim Postfach 1565 D eidenheim server.ab@lohse-gmbh.de PA VENTILER AB Sagbäcksvägen 3B, Lindome Tel ax info@paventiler.se paventiler.se
4 GO WIT OUR LOW Valves of stainless steel COMPACT-Program Valve plate corrosion und acid resistant stainless steel (hardened if CDSV) Stuffing box gland corrosion und acid resistant stainless steel Press gland ultra-high molecular weight low pressure polyéthylèn Packing assembly Aramid fibre PTE impregnated with sealing of EPDM or VITON ousing plate entirely of corrosion and acid resistant stainless steel langing ring entirely of corrosion and acid resistant stainless steel (hardened if CDSV) NL-ring EPDM or Viton Slide cups polyproylene Sealing cord EPDM or Viton MARTIN LOSE Gmb Unteres Paradies 63 D eidenheim Postfach 1565 D eidenheim PA VENTILER AB Sagbäcksvägen 3B, Lindome Tel ax paventiler.se
5 GO WIT OUR LOW Valves Materials of stainless steel COMPACT-Program housing flanging ring CBS mm valve plate slide cups PP sealing EPDM or VITON slide parts CuSn6 / CuAl10Ni stuffing box gland packing assembly : packing aramid fibre with impregnation of PTE p-ring EPDM, VITON or NBR 600 aramid fibre with PTE : packing aramid fibre with impregnation of PTE p-ring EPDM, VITON or NBR press gland PE-MW (RC 500) bracket screws / nuts A2 max. operating pressure bar bar bar bar bar max. operating temperature 120 C Type CDSV similar, but with hardened flanging rings and valve plate. MARTIN LOSE Gmb Unteres Paradies 63 D eidenheim Postfach 1565 D eidenheim server.ab@lohse-gmbh.de PA VENTILER AB Sagbäcksvägen 3B, Lindome Tel ax info@paventiler.se paventiler.se
6 GO WIT OUR LOW Valves Operating of stainless elements steel COMPACT-Program the LOSE modular system All LOSE COMPACT-valves comprise the following main groups: valve body type: CDS, CDSV operating elements type ns,, P, PV, E, GK, K, X All elements are interchangeable for any given size. Thereby the connections of brackets as well as the coupling of actuator and valve plate will be removed and fixed again after the exchange. No removal of incorporated valve body (notice safety rules pipes must be pressureless). This facility is called the LOSE modular system which offers the following advantages: simplified and less expensive holding of spare parts. in case of damage, actuating elements can be replaced inexpensively. if any valve drives have to be altered, replacement is easy and quick Protection guards (G) According to machinery directive 2006/42/EG guards are complusory to shield all moving parts on automated gate valves. Protection guard of stainless steel. MARTIN LOSE Gmb Unteres Paradies 63 D eidenheim Postfach 1565 D eidenheim server.ab@lohse-gmbh.de PA VENTILER AB Sagbäcksvägen 3B, Lindome Tel ax info@paventiler.se paventiler.se
7 GO WIT OUR LOW lange bores for LOSE COMPACT-valves Valves of stainless steel COMPACT-Program according to DIN EN , PN 10 [mm] K [mm] Z M T [mm] Z1 Z M M M M M M M M C D M T M M M M M Z = total number of holes Z1 = number of joint-holes Z2 = number of through-going bores T = usable depth of thread M M27 MARTIN 40 LOSE 20 Gmb M30 Unteres 45 Paradies D eidenheim M30 Postfach D eidenheim M server.ab@lohse-gmbh.de M M PA VENTILER AB Sagbäcksvägen 3B, Lindome Tel ax info@paventiler.se paventiler.se
8 GO WIT OUR LOW Valves lange of stainless bores for steel LOSE COMPACT-Program COMPACT-valves according to ANSI B 16.5 Class 150 ( 700: ANSI B Class 150) [mm] [inch] K [mm] K [inch] Z UNC T [mm] T [inch] /4 4 5/ /2 4 5/ / /2 8 5/ /2 8 3/ /2 8 3/ /4 8 3/ /4 12 7/ / C D Z1 Z2 UNC T / / / / / Z = total number of holes Z1 = number of joint-holes Z2 = number of through-going bores T = usable depth of thread / / , MARTIN 28 LOSE 1 1/4-7Gmb /2Unteres 28 Paradies 1 1/ D eidenheim Postfach 1565 D eidenheim 42 3/ / / / server.ab@lohse-gmbh.de / / / PA VENTILER AB Sagbäcksvägen 3B, Lindome Tel ax info@paventiler.se paventiler.se
9 GO WIT OUR LOW Valves COMPACT-shut-off stainless steel valve COMPACT-Program with through-going valve plate handwheel drive with non-rising stem Type CDSVns similar, but with hardened valve plate and flanging rings ø J C D E B Tr Dx L G A BD [bar] A B C D E G Ø J Tr D x L weight ~[kg] x x x x x x x x x x x MARTIN LOSE Gmb x Unteres Paradies D eidenheim x Postfach D eidenheim x 6 Dimensions in mm, flange dimensions server.ab@lohse-gmbh.de to DIN EN , PN 10 or ANSI B 16.5 Class 150 ( 700: ANSI B Class 150). urther sizes on request. PA VENTILER AB Sagbäcksvägen 3B, Lindome Tel ax info@paventiler.se paventiler.se
10 GO WIT OUR LOW Valves COMPACT-shut-off stainless steel valve COMPACT-Program with through-going valve plate handwheel drive with rising stem Type CDSV similar, but with hardened valve plate and flanging rings ø J Tr Dx L C D I E B G BD [bar] A A B C D E G I Ø J Tr D x L x x x x x x x x x x x x MARTIN LOSE Gmb Unteres 840 Paradies D eidenheim x Postfach D eidenheim x Dimensions in mm, flange dimensions server.ab@lohse-gmbh.de to DIN EN , PN 10 or ANSI B 16.5 Class 150 ( 700: ANSI B Class 150). urther sizes on request. weight ~[kg] PA VENTILER AB Sagbäcksvägen 3B, Lindome Tel ax info@paventiler.se paventiler.se
11 GO WIT OUR LOW Valves COMPACT-shut-off stainless steel valve COMPACT-Program with through-going valve plate pneumatic cylinder and protection guard Type CDSVP/G similar, but with hardened valve plate and flanging rings K L Steueranschluss air connection J G C D I E y B BD [bar] A A B C D E G I J K L cyl Ø air connection G 1/ G 1/ G 1/ G 1/ G 1/ G 1/ G 1/ G 1/2 134 MARTIN LOSE Gmb Unteres 300 Paradies D eidenheim G 1/ Postfach D eidenheim G 1/2 235 Dimensions in mm, flange dimensions to DIN EN , PN 10 or ANSI B 16.5 Class 150 ( 700: ANSI B Class 150); air connection acc. VDI/VDE 3845 (NAMUR). server.ab@lohse-gmbh.de urther sizes on request. weigth ~[kg] PA VENTILER AB Sagbäcksvägen 3B, Lindome Tel ax info@paventiler.se paventiler.se
12 GO WIT OUR LOW Valves COMPACT-shut-off stainless steel valve COMPACT-Program with through-going valve plate pneumatic cylinder and protection guard Type CDSVP/G similar, but with hardened valve plate and flanging rings K L I J E B C D G A BD [bar] A B C D E G I J K L cyl Ø air connection G 1/ G 1/ G 3/ MARTIN 545 LOSE Gmb G 3/ Unteres 645 Paradies D eidenheim G 3/ Postfach D eidenheim G 3/4 Dimensions in mm, flange dimensions server.ab@lohse-gmbh.de to DIN EN , PN 10 or ANSI B 16.5 Class 150 ( 700: ANSI B Class 150). urther sizes on request. weigth ~[kg] PA VENTILER AB Sagbäcksvägen 3B, Lindome Tel ax info@paventiler.se paventiler.se
13 GO WIT OUR LOW Valves COMPACT-shut-off-valve stainless steel COMPACT-Program with through-going valve plate, extended housing, valve plate and flanging rings hardened, conical inlet with turbulence interrupter (ribs), with pneumatic cylinder and protection guard K L Steueranschluss air connection G C D I J E B BD [bar] A A B C D E G I J K L cyl Ø air connecion G 1/ G 1/ G 1/ G 1/ G 1/ G 1/ G 1/ MARTIN 440LOSE 127 Gmb G 1/ Unteres 505Paradies D eidenheim G 1/ Postfach D eidenheim G 1/2 Dimensions in mm, flange dimensions to DIN EN , PN 10 or ANSI B 16.5 Class 150 ( 700: ANSI B Class 150); air connection acc. VDI/VDE 3845 (NAMUR). server.ab@lohse-gmbh.de urther sizes on request. PA VENTILER AB Sagbäcksvägen 3B, Lindome Tel ax info@paventiler.se paventiler.se
14 Type: CDSRP/G CDS/CDSV/CDSR mm GO WIT OUR LOW Valves COMPACT-shut-off-valve stainless steel COMPACT-Program with through-going valve plate, extended housing, valve plate and flanging rings hardened, conical inlet with turbulence interrupter (ribs), with pneumatic cylinder and protection guard K J A G C D I E B L BD [bar] A B C D E G I J K L cyl Ø air connecion G 1/ G 1/ G 3/ MARTIN 1000LOSE 268 Gmb G 3/ Unteres 1155 Paradies D eidenheim G 3/ Postfach D eidenheim G 3/4 Dimensions in mm, flange dimensions server.ab@lohse-gmbh.de to DIN EN , PN 10 or ANSI B 16.5 Class 150 ( 700: ANSI B Class 150). urther sizes on request. PA VENTILER AB Sagbäcksvägen 3B, Lindome Tel ax info@paventiler.se paventiler.se
15 GO WIT OUR LOW Valves COMPACT-shut-off-valve stainless steel COMPACT-Program with through-going valve plate pneumatic-cylinder with variable stroke limiter and protection guard Type CDSVPV/G similar, but with hardened valve plate and flanging rings Variable stroke limiter in direction of closing: loosen the nut (1), adjust the adjustable pipe (2), tighten the nut (1) in direction of opening: loosen the nut (3), adjust the adjustable screw (4) tighten the nut in direction of opening in direction of closing cyl.ø L max ~ L max ~ MARTIN 190 LOSE Gmb Unteres 202 Paradies 63 D eidenheim Postfach D eidenheim 554 server.ab@lohse-gmbh.de urther sizes on request. PA VENTILER AB Sagbäcksvägen 3B, Lindome Tel ax info@paventiler.se paventiler.se
16 GO WIT OUR LOW Valves COMPACT-shut-off-valve stainless steel COMPACT-Program with through-going valve plate electric drive and protection guard Type CDSVE/G similar, but with hardened valve plate and flanging rings K J L ø I G D C M E B A N BD [bar] A B C D E G ØI J K L M N stem Tr Dx MARTIN 208 LOSE Gmb x Unteres 228 Paradies D eidenheim x Postfach D eidenheim x Dimensions in mm, flange dimensions server.ab@lohse-gmbh.de to DIN EN , PN 10 or ANSI B 16.5 Class 150 ( 700: ANSI B Class 150). urther sizes on request. closing time [s] x x x x x x x x x x x weight ~[kg] PA VENTILER AB Sagbäcksvägen 3B, Lindome Tel ax info@paventiler.se paventiler.se
17 GO WIT OUR LOW Valves COMPACT-shut-off-valve stainless steel COMPACT-Program with through-going valve plate bevel gear box and handwheel Type CDSVGK similar, but with hardened valve plate and flanging rings K I G E C D ø M J Tr Dx L B BD [bar] A A B C D E G I J L ØM Tr Dx x x x x x x x MARTIN 545 LOSE 268 Gmb x Unteres 645Paradies D eidenheim x Postfach D eidenheim x 7 Dimensions in mm, flange dimensions server.ab@lohse-gmbh.de to DIN EN , PN 10 or ANSI B 16.5 Class 150 ( 700: ANSI B Class 150). urther sizes on request. weight ~[kg] PA VENTILER AB Sagbäcksvägen 3B, Lindome Tel ax info@paventiler.se paventiler.se
18 GO WIT OUR LOW Valves COMPACT-shut-off-valve stainless steel COMPACT-Program with through-going valve plate sprocket drive Type CDSVK similar, but with hardened valve plate and flanging rings ø J Tr Dx L L C D E B G A BD [bar] A B C D E G L Ø J Tr D x L x x x x x x MARTIN 355 LOSE 222 Gmb x Unteres 440 Paradies D eidenheim x Postfach D eidenheim x Dimensions in mm, flange dimensions server.ab@lohse-gmbh.de to DIN EN , PN 10 or ANSI B 16.5 Class 150 ( 700: ANSI B Class 150). urther sizes on request. weight ~[kg] PA VENTILER AB Sagbäcksvägen 3B, Lindome Tel ax info@paventiler.se paventiler.se
Valves of stainless steel COMPACT-Program C D
SUT-O Valves VALVES STAINLESS STEEL CNA 50 1000 mm Shut-Off-Valves GO WIT OUR LOW Valves CNA 50 1000 mm MARTIN LOSE Gmb Unteres Paradies 63 D-89522 eidenheim Postfach 1565 D-89505 eidenheim server.ab@lohse-gmbh.de
Valves. MARTIN LOHSE GmbH
Valves MARTIN LOHSE GmbH MARTIN LOHSE GmbH Valves Valves 3 Operating Elements 129 Dirt Traps 163 Vortex Breakers 169 Butterfly Valves 175 Ball Valves 225 Sampling Valves 265 Check Valves 279 Accessories
Valves. MARTIN LOHSE GmbH
Valves MARTIN LOHSE GmbH MARTIN LOHSE GmbH Valves Shut-Off-Valves normal of stainless steel Type CNA with through-going valve plate Type CDS, CDSV Type DS effluent and clarification Type CAW Regulating
Shut-Off-Valves with through-going valve plate CDS/CDSV/CDSR mm
Valves of stainless steel COMPACT-Program with through-going valve plate CDS/CDSV/CDSR 50 1000 mm H C D F MARTIN LOHSE GmbH Unteres Paradies 63 D-89522 Heidenheim Postfach 1565 D-89505 Heidenheim phone
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
HEAVY DUTY KNIFE GATE VALVE. ANSI B16.5 (class 150) and DIN PN 10
HEAVY DUTY KNIFE GATE VALVE The SERIES knife gate is a uni-directional lug type valve designed according to the MSS-SP-1 and TAPPI TIS 405- standard for industrial service applications. The design of the
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
Valve Solutions for the Bulk Material Industry
Valve Solutions for the Bulk Material Industry SUCCESS STORY Plant name & location: Tronox, llc. Hamilton, Ms Application: Ore Silo Inlet Media: Titanium Rutile Ore Tronox, llc., formerly Kerr McGee Chemical
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
KNIFE GATE VALVES -- MODEL D
PRODUCT DESCRIPTION Flanged unidirectional knife gate valve for high pressure applications One piece integral cast body with seating wedges and bolted bonnet. High flow rates with low pressure drops. Several
THROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice
THROUGH CONDUIT KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
WAFER STYLE KNIFE GATE VALVE
MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut
DOUBLE GATE KNIFE GATE VALVE. OBX 09/09 8th EDITION Reserves the right to change specifications without notice
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES KGV XD-PRE SERIES FULLY LUGGED WITH RISING STEM & HANDWHEEL KGV XD-PRE SERIES FULLY LUGGED WITH D/A PNEUMATIC ACTUATOR KGV XD-PRE SERIES FULLY LUGGED WITH
HEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The model knife gate is an uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body and
WAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
BI-DIRECTIONAL KNIFE GATE VALVE
BI-DIRECTIONAL KNIFE GATE VALVE The model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on suspended
L15 HEAVY DUTY KNIFE GATE VALVE STANDARD PARTS LIST
L15 HEAVY DUTY KNIFE GATE VALVE The L15 model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging
Knife Gate Valve HERA-SH. PN 10/16, Class 150 DN Uni-directional Full-lug body. Type Series Booklet
Knife Gate Valve HERA-SH PN 10/16, Class 150 DN 50-600 Uni-directional Full-lug body Type Series Booklet Legal information/copyright Type Series Booklet HERA-SH All rights reserved. The contents provided
BI-DIRECTIONAL KNIFE GATE VALVE
Wastewater treatment plants Food and Beverage Chemical plants Sizes: Working pressure: DN 2"/ 50mm to DN 10"/ 250mm DN 12"/300mm to DN 16"/ 400mm DN 18"/450mm DN 20"/500mm to DN 24"/ 600mm DN 28"/700mm
DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through a pipeline. They can also be used for flow-control
KNIFE GATE VALVES -- MODEL A
PRODUCT DESCRIPTION Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. Several seat
DOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate valve is a bi-directional valve widely used in the Pulp and Paper industry (paper recycling) and especially designed to handle high concentrated or contaminated
Technical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²
WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-05 (Rev. 08/2015)
General Description The FKB Knife-gate valves model VGU-05 brings cost-effective solution to block the flow of abrasive fluids. These are strong equipments to be installed between flanges, which has Wafer
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-29 (Rev. 02/2016)
General Description The model FKB VGU-29 brings an economic solution to block abrasive and corrosive fluid sewage for granulometry until 5mm. They are light equipments, to be installed through flanges,
SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6
Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control
KNIFE GATE VALVE Product Ref. : KG02W/KG02L
General Description Model KG02 is a bidirectional knife gate valve suitable for most industrial application cases. With one piece body design, it combines robust and economy giving best cost effective
BIDIRECTIONAL WAFER Knife Gate Valve
09/03/2016 BIDIRECTIONAL WAFER Knife Gate Valve Bidirectional wafer design knife gate valve. Monoblock one piece cast iron body. Stainless steel gate. Two rubber sleeves. Provides high flow rates with
BALL SECTOR VALVE of stainless steel 455 (459) series
Operation C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and
BALL SECTOR VALVE of stainless steel 455 (459) series
Operation C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and
with electric and pneumatic actuators Control valve in 3-way-form (3-way mixing valve) DN 300 ARI-STEVI 423 Electric actuator ARI-PREMIO
with electric and pneumatic actuators Control valve in 3-way-form (3-way mixing valve) DN 300 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches Handwheel Additional devices available, e.g.
SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6
Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control
UNIDIRECTIONAL Knife Gate Valve
12/04/2016 UNIDIRECTIONAL Knife Gate Valve Unidirectional knife gate valve. Mechanically welded body. Various seat and packing materials available. Face to face dimension in accordance with standard, it
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional full flanged valve equipped with two metal reinforced rubber sleeves designed for use in the handling of abrasive slurries, mainly
UNIDIRECTIONAL Knife Gate Valve
30/10/2013 UNIDIRECTIONAL Knife Gate Valve Unidirectional knife gate valve, with wafer design and quick opening and closing. Body made up of two screwed down halves, with slides to provide smooth operation.
Shearseal Knife Gate Valves. Manufactured by TSE
Shearseal Knife Gate Valves Manufactured by TSE Shearseal Design Most knife gate valve manufacturers describe their valve as rugged and dependable. In the Shearseal Valve, these qualities are not idle
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional full flanged valve equipped with two metal reinforced rubber sleeves designed for use in the handling of abrasive slurries, mainly
UNI-DIRECTIONAL KNIFE GATE VALVE
UNI-DIRECTIONAL KNIFE GATE VALVE The MU-CYL model knife gate is a Uni-directional valve, equipped with automatic or manual driver, that by its loose elastomeric clamping ring design (tight version) ensures
SQUARE PORT KNIFE GATE VALVE
SQUARE PORT KNIFE GATE VALVE The model knife gate is a square port low-pressure valve for highly solid loaded fluids or solids, mainly used in bulk handling and silo outlet applications in industries such
Knife gate valve HG - Standard
Knife gate valve HG - Standard V R Data is only for informational purpose. All specifications are subject to change without notice. 1 Knife gate valve HG Stafsjö s knife gate valve HG has excellent flow
Shut-Off-Valves CNA mm
Valves of stainless steel COMPACT-Program CNA 50 1000 mm H C D MARTIN LOHSE GmbH Unteres Paradies 63 D-89522 Heidenheim Postfach 1565 D-89505 Heidenheim phone +49(0)7321 / 755-42 fax +49(0)7321 / 755-97
BIDIRECTIONAL WAFER Knife Gate Valve
05/10/2012 BIDIRECTIONAL WAFER Knife Gate Valve Bidirectional wafer design knife gate valve. Monoblock one piece cast iron body. Stainless steel gate. Two rubber sleeves. Provides high flow rates with
NAF-Setball ball sector valves DN , PN 10-40, ANSI Class Fk 41.51(15)GB 03.10
NAF-Setball ball sector valves DN -0, PN 0-, ANSI Class 0-0 Fk 4.()GB 03.0 Primary characteristics NAF-Setball is a ball sector valve with metal-to-metal or metal-to-ptfe seating. The NAF-Setball combines
ROUND BY SQUARE PORT KNIFE GATE VALVE
ROUND BY SQUARE PORT KNIFE GATE VALVE The model knife gate is a wafer valve designed for handling difficult applications. This valve is suitable for using in recycling applications, like junk or sand traps
BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
NAF-Setball ball sector valves DN , PN 10-40, ANSI Class
NAF-Setball ball sector valves DN 25-400, PN 10-40, ANSI Class 150-300 Fk 41.51(12)GB 4.98 Replaces Fk 41.51(1GB 12.97 Primary characteristics NAF-Setball is a ball sector valve with metal-to-metal or
Every component precisely matched
Series 8B Every component precisely matched Powerful valve actuator Most commonly used is the pneumatic multi-spring actuator series MA as shown here. It is robust, ex-proof, features low actuating times,
R o L. WAFER PATTERN V-PORT BALL VALVE stainless steel 465 series SILVER LINE. Operation. Description. Edition
Operation WAFER PATTERN V-PORT BALL VALVE stainless steel C ont R o L Description Edition Högfors ball sector valve series 465 is specially designed for control applications of various medium like liquids,
Knife gate valves Index
Index General information page Introduction 144 Product information page ast Iron/SS; Uni-directional 146 ast Iron/SS; i-directional; Throught conduit 147 ast Iron/SS; i-directional 148 ast Iron/SS; Silo
UNIDIRECTIONAL Gate Valve
23/04/2013 UNIDIRECTIONAL Gate Valve Unidirectional flanged gate valve (bidirectional option to order), designed for high pressure applications, with self cleaning seal. Single piece die cast body with
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50
2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be
COMPANY PROFILE TABLE OF CONTENT. Our products have been supplied to local and foreign customers for the following industries:
UTTERFLY VALVES TALE OF CONTENT COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual
Every component precisely matched
Series 200 Every component precisely matched Powerful valve actuator 1 Most commonly used is the electric actuator series SHE as shown here. It is robust, provides a constant seating force and is cost
Every component precisely matched
Series 1 Every component precisely matched Powerful valve actuator Most commonly used is the pneumatic multi-spring actuator series MA as shown here. It is robust, ex-proof, features low actuating times,
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH RISING STEM & HANDWHEEL KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR KGV-XD FULLY LUGGED WITH BONNET & HADNWHEEL The XD model knife gate is a Bi-directional
BALL SECTOR VALVE of stainless steel 455 series
C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and crystallizing
Inline Sampling Valves SSV Series, full-port design
SSV: Product Info 81 Inline Sampling Valves, full-port PM 81 M.00 e Inline Sampling Valves SSV Series, full-port design for safe and representative sampling of aggressive or even toxic liquids from pipelines
Manual Valves. The solution you ve been looking for
Manual Valves Larox manual valves Larox manual valves are ideal for shut off applications that involve abrasive or corrosive slurries, powders or granular substances. Our advanced flow control solutions
BIOVENT. Hygienic Valve
BIOVENT BIOVENT Committed to perfection in every detail Powerful valve actuator BIOVENT control valves are usually combined with pneumatic multi-spring ARCAPAQ actuator type 813. Not only is it cost effective,
STAINLESS STEEL ARES PNEUMATIC ANGLE-SEAT VALVE
FEATURES The stainless steel ARES valve is intended for the automatic shut-off of networks of fluids. The full-bore, inclined-seat body and the excellent flow-rate coefficients allow for very low pressure
Sempell High Pressure Stop Valves Model VA510 (DIN)
Designed for highest pressure and temperature applications using high alloy or stainless steels. Features T-pattern globe type Body made of forged steel Wear resistant stellite body seat Conical seat with
Keystone knife gate valves Figure OS1700
Bi-directional zero leakage ASME Class 150 rated knife gate valve. Designed for the rigors of high pressure slurry and oil sands applications Features General application The OS1700 has many features to
EDELSTAHL. Kämmer Series Aseptic and Sanitary Valves
EDELSTAHL Aseptic and Sanitary Valves 1 51917.p65 1 4/16/0, :29 PM The Kämmer 191000 Series product line provides control valve solutions for sanitary and aseptic process systems. These valves meet the
UNIDIRECTIONAL Guillotine Valve
Unidirectional "LUG" guillotine valve. Monobloc cast body with interior slides for optimum movement of the gate during operation. Provides high flow rates with low pressure drop. Various seat and packing
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-01 (Rev. 02/2016)
General Description The model FKB VGU-01 is developed in accordance with MSS-SP 81 Standard and its function is blocking the fluid sewage. They are light equipments for semi-lug body and flange installation,
BIDIRECTIONAL Knife Gate Valve
BIDIRECTIONAL Knife Gate Valve 30/10/2013 Bidirectional knife gate valve. Two piece cast body, joined by screws, with internal guides for smooth movement of gate during operation. Provides high flow rates
3 & 4 WAY DIVERTER VALVES DESIGN FEATURES
3 & 4 WAY DIVERTER VALVES The 3V and 4V models are diverter valves designed to handle solid loaded fluids. Mainly used for pulp stock in the Pulp and Paper industry. Sizes: 80 to 300 (larger diameters
Ball Valves SBV Series full-port
SV: Product Info 23 all Valves, plastomer-lined PM 23 M.00 e December 2006 all Valves SV Series full-port Ideally suited for positive shut-off, flow control and throttling of corrosive, abrasive or even
Sempell High Pressure Stop Valves Model VA500 (DIN)
Designed for the isolation and control of high temperature and high pressure systems, this multipurpose globe valve can be used in a wide variety of applications. Features Type tested (except for material
BIDIRECTIONAL WAFER Knife Gate Valve
31/07/2014 BIDIRECTIONAL WAFER Knife Gate Valve - Bidirectional wafer-design knife gate valve. - One-piece cast body. - Provides high flow rates with low pressure drop. - Various seat and packing materials
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
AUTOMATIC VALVES. The solution you ve been looking for THE SOLUTION YOU VE BEEN LOOKING FOR
al s AUTOMATIC VALVES The solution you ve been looking for LAROX AUTOMATIC VALVES Larox automatic valves are ideal for shut off or control applications that involve abrasive or corrosive slurries, powders
485 - NC NO/DA DN
485 - NC 285 - NO/DA DN 25-100 The 485/285 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 390 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
Shut-Off-Valves CNA mm
Valves of stainless steel COMPACT-Program CNA 50 1000 mm H F C D MARTIN LOHSE GmbH Unteres Paradies 63 D-89522 Heidenheim Postfach 1565 D-89505 Heidenheim phone +49(0)7321 / 755-42 fax +49(0)7321 / 755-97
BR 30a. Pneumatic Multi-turn Actuator. Application: Special designs:
Pneumatic Multi-turn Actuator BR 30a Application: Single-acting pneumatic diaphragm multi-turn actuator for butterfl y valves and other rotary valves: The pneumatic BR 30a Multi-turn Actuators are diaphragm
Butterfly valve with ADA pneumatic actuator
1133-1135 Butterfly valve with ADA pneumatic actuator MAIN CARACTERISTICS The 1133-1135 lug butterfly valves are dedicated to the automatic shut off of standard fluids lines. The construction includes
MANUAL VALVES. The solution you ve been looking for THE SOLUTION YOU VE BEEN LOOKING FOR
al es MANUAL VALVES The solution you ve been looking for LAROX MANUAL VALVES Larox manual valves are ideal for shut off applications that involve abrasive or corrosive slurries, powders or granular substances.
2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body Available with flow direction below and above
DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
DOULE-ECCENTRIC UTTERFLY VALVES TYPE L32.7 Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through
2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel valve body Compact industrial design with long service life /2702 can be combined
Knife gate valve SLF. Data is only for informational purpose. All specifications are subject to change without notice issue 3
Knife gate valve SLF Data is only for informational purpose. All specifications are subject to change without notice. V R 1 2013-02-15 issue 3 Knife gate valve SLF Stafsjö s knife gate valve SLF is a flanged
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Fabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI
Knife Gate Valves Uni-Directional (Metal Seated) Manual Handwheel Style KGV...2 Carbon Steel Technical Data 150 PSI 2 24...3 304 Stainless Steel Technical Data 150 PSI 2 24...3 316 Stainless Steel Technical
Neotecha NTB - NTC PFA lined ball valves
These PFA lined ball valves are used in a wide variety of applications in many industries Features General application The valves are ideally suited for corrosive applications, requiring reliable performance,
SPN II Pneumatic Actuator
SPN II Pneumatic Actuator Rack & pinion design The standard actuator configuration has an epoxy coated, hard anodized aluminum body and epoxy coated end caps Inside surface finish (Ra 0.4-0.6µm) to minimize
NAF-Setball ball sector valves for MC-pulp DN , PN 16-40, ANSI Class
NAF-Setball ball sector valves for MC-pulp DN 80-300, PN 16-40, ANSI Class 150-300 Fk 41.54(1)GB 08.12 Primary characteristics NAF-Setball for MC-pulp is a ball sector valve with metalto-metal seating
ECOTROL. control valve
ECOTROL control valve ECOTROL control valve Committed to perfection in every detail 2 Powerful valve actuator The pneumatic multi-spring 812 series actuator shown here is deployed in many applications
UNIDIRECTIONAL WAFER Knife Gate Valve
29/01/2016 UNIDIRECTIONAL WAFER Knife Gate Valve Unidirectional wafer design knife gate valve. One piece cast body with guides to support gate and seat wedges. Provides high flow rates with low pressure
Konrad. Quality. Out of tradition & conviction. Armaturentechnik WATER ENERGY OIL & GAS STEEL CHEMICAL INDUSTRY
WATER ENERGY OIL & GAS STEEL CHEMICAL INDUSTRY Made in The Company Product >> Products from the early days of Alfred Maschinenfabrik >> Sectional drawing of one of the initial EXENTROMAT units CEO: Dipl.-Ing.
UNIDIRECTIONAL Knife Gate Valve
UNIDIRECTIONAL Knife Gate Valve 24/04/2013 Unidirectional knife gate valve. One piece cast body with guides to support gate and seat wedges. Provides high flow rates with low pressure drop. Various seat
Control valves with pneumatic actuators up to 350 C PN
300 540 1080 2 Features Suitable in building and process engineering for various mediums 0...+200 C Suitable with stuffing box extension or stem seal with stainless steel bellow to 10...+350 C and for
2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50
2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50 High cycle life Flow optimised body in stainless steel 316L Deliverable with fl ow direction below or above seat Clean design
ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP 34-34T. Electric actuator ARI-PREMIO 5-25 kn ARI-PREMIO-Plus 2G 5-25 kn
Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP 34-34T Reversible pneumatic actuator