CASEMENT - LARGE MISSILE IMPACT

Transcription

1 73 1/4" M. OVERLL FLNGE 72" M. UNIT 70" M. SSH SEMENT - LRGE MISSILE IMPT 38 1/4" M. OVERLL FLNGE WIDTH 37" UNIT WIDTH 35" M. SSH WIDTH D 5 1/2" GLSS DLO 4 1/4" M. OVERLL FLNGE 3" M. UNIT 1" M. SSH 38 1/4" M. OVERLL FLNGE WIDTH 37" UNIT WIDTH 35" M. SSH WIDTH 5 1/2" GLSS DLO GENERL NOTES: 1. THE PRODUT SHOWN HEREIN IS DESIGNED ND MNUFTURED TO OMPLY WITH THE FLORID UILDING ODE (F), URRENT EDITION INLUDING THE HIGH VELOITY HURRINE ZONE (HVHZ) ND IS RTED FOR WIND ZONE 4 MISSILE LEVEL D IMPT USE S DEFINED IN STM E 199 PER THE F. 2. GLZING OPTIONS: (SEE 2) 3. ONFIGURTIONS: LL WINDOWS RE OPEN TO OUTSIDE LEFT OR RIGHT. 4. DESIGN PRESSURES: -NEGTIVE DESIGN LODS SED ON TESTED PRESSURE ND GLSS TLES STM E POSITIVE DESIGN LODS SED ON TESTED PRESSURE, WTER INFILTRTION TEST PRESSURE, ND GLSS TLES STM E NHORGE: THE 33 1/3% STRESS INRESE HS NOT EEN USED IN THE DESIGN OF THIS PRODUT. SEE FOR INSTLLTION DETIL. WIND LOD DURTION FTOR d=1. WS USED FOR WOOD NHOR LULTIONS.. PRODUTS PPROVED FOR IMPT RESISTNE. SHUTTERS RE NOT REQUIRED. 7. LL FRMES ND VENTS FULLY WELDED. 8. SERIES/MODEL DESIGNTION THE DESIGNTION STNDS FOR THE FOLLOWING: = OPERLE SSH 10. SETION LLOUTS PPLY TO LL ELEVTIONS IN SIMILR LOTION. OL, FLORID PV SEMENT IMPT UPDTED PER 2014 F UPDTED PER 2010 F F UPDTE 03/17/08 Y: DESRIPTION: TLE OF ONTENTS GENERL NOTES & ELEVTIONS...1 GLZING DETILS...2 SETION VIEWS...3 ETRUSIONS &.O.M...4 NHOR SHEDULE & NOTES...5 INSTLLTION DETILS /2" GLSS DLO LEFT HINGED - SHOWN RIGHT HINGED - OPPOSITE 30 1/2" GLSS DLO RIGHT HINGED - SHOWN LEFT HINGED - OPPOSITE LOTION M. UNIT SIZE DESIGN PRESSURE RTING IMPT RTING NON-HVHZ +/- 5 PSF 37" x 3" HVHZ +/- 7.5 PSF LRGE MISSILE IMPT NON-HVHZ +/- 5 PSF 37" x 72" HVHZ +/- 7.5 PSF LUS. TURNER, P.E JR VE. DESRIPTION: GENERL NOTES ND ELEVTIONS DRWN Y: 05/05/07 WS-11 SLE: 1:15 1 OF

2 OL, FLORID PV SEMENT IMPT /8" OVERLL 1/8" NNELED or TEMPERED 7/1" IR SPE 5/1" LMINTED GLSS 1/8" NNELED.090 DUPONT PV INTERLYER 1/8" NNELED SIKFLE 552 OR PURFET GLZE "H" 1/2" GLSS ITE /8" OVERLL 1/8" HET STRENGTHENED or TEMPERED 7/1" IR SPE 5/1" LMINTED GLSS 1/8" HET STRENGTHENED.090 DUPONT PV INTERLYER 1/8" HET STRENGTHENED SIKFLE 552 OR PURFET GLZE "H" 1/2" GLSS ITE UPDTED PER 2014 F UPDTED PER 2010 F F UPDTE 03/17/08 Y: DESRIPTION: GLSS TYPE GLSS TYPE LUS. TURNER, P.E JR VE. DESRIPTION: GLZING DETILS DRWN Y: M. UNIT SIZE M. POS. DP GLSS TYPE 37" x 3" " x 72" /05/07 WS-11 SLE: 1:1 2 OF

3 INTERIOR OL, FLORID PV SEMENT IMPT INTERIOR SETION VIEW - 18 UPDTED PER 2014 F UPDTED PER 2010 F F UPDTE 03/17/08 Y: DESRIPTION: LUS. TURNER, P.E JR VE. DESRIPTION: SETION VIEW - ITEMS NOT SHOWN FOR LRITY: 14, 1-17, 19-20, 25, 27, 32, 34, 37-38, 42, 44-45, 50 LTERNTE FIN FRME DRWN Y: 05/05/07 WS-11 SLE: 1:2 SETION VIEWS 3 OF

4 NOTE: LL ETRUSIONS RE LUMINUM 03-T UNLESS OTHERWISE NOTED. 1" 1/1" 1/1" 1/1" 1/1" 5 1/1" 7/32" ORNER WELD (LL SIDES) FRME ND SSH ORNER ONSTRUTION 1:8 3/32" 15 OM ND ETRUSIONS PRTS LIST ITEM PRT # DESRIPTION VENDOR MTERIL 1 H-030 FR., SE., MIN, HED MIKRON PV 2 H-030 FR., SE., MIN, SILL MIKRON PV 3 H-030 FR., SE., MIN, J., RIGHT MIKRON PV 4 H-030 FR., SE., MIN, J., LEFT MIKRON PV 5 H-030 FR., SE., W/ FIN MIKRON PV H-008 SSH, SE., TOP RIL MIKRON PV 7 H-008 SSH, SE., OT. RIL MIKRON PV 8 H-008 SSH, SE., SIDE RIL, HINGE MIKRON PV 9 H-008 SSH, SE., SIDE RIL, LOK MIKRON PV 10 H-1592 SREEN RIL, SIDE/TM KEYMRK LUM 11 H-1593 SREEN RIL, TOP/SIDE KEYMRK LUM 12 GLSS SEE 2 13 P-3028 SET. LK., 85 DUR., 1/8" 7/8" 2" LG. FRNK LOWE RUER 14 P-3029 SREEN LIFT-OUT SUMMIT 15 P-3113 SREW SUPPORT FOR PV TEM PLSTIS RUER 1 P-3195 SREEN SPRING, NO HOLE TENSION 17 P-3197 SREEN ORNER KEY M&M NYLON 18 P-3217 WSTP., WHITE LEF SEL, FRME MESURY RUER 19 P-3228 SREEN SPLINE,.155 DI, LK DP 20 P-3281 SPER, DURSEL, SEE 3 DURSEL TRUSEL 21 P-3342 SEM SELER, SM-5504 SHNEE SILIONE 22 P-3429 WSTP., K, ULTR FIN, LK, SSH ULTRF 23 PURFET GLZE "H", SIKFLE 552 HENKEL, SIK 24 P-3539 #8 3/4" QUD PH TEK, ZIN, SREW 25 P-3581 SREEN LOTH, 18 1 FIERGLSS PHIFER 2 P-3587 #8 1" PH FH TEK 2, SS, SREW FSTENL SS 27 P-313 WS LL. (LOGO) 28 P-385 S-8400 GOLD ERT. LEL, NFR T 29 P-3752 P PLUG, 1/2" HOLE M&M NYLON 30 P-3881 TEMPORRY LL. (NFR/DP) 31 P-3940 SNUER, SS, PV 32 P-4003 TIE R GUIDE, ROTO. HDWE. ROTO SS 33 P-4004 #8-32 1/2" PH PH, MS, SS (ROTO HDWE. LOK) FSTENL SS 34 P-4005 SUPPORT PLTE, LOK, SS, ROTO HDWE. (Use w/ P-400) ROTO SS 35 P-400 LOK, MULTI-POINT, ROTO HDWE., WHITE ROTO SS 3 P-4007 ROTO. OPERTORS (FOR LEFT/RIGHT OPEN SEMENT) ROTO SS 37 P-4009 TRK & SLIDER SSM., ROTO OPER., ROTO HDWE., (13") ROTO SS 38 P-4010 STUD RKT., ROTO OPER., L.H., ROTO HDWE. ROTO SS 39 P-4012 SHIM, ROTO OPERTOR, ROTO HDWE. (4.8mm) ROTO NYLON 40 P-4014 HNDLE, STD, ROTO OPER, ROTO HDWE. (WHITE) ROTO ZIN 41 P-4018 HINGES (LEFT/RIGHT FOR LEFT OR RIGHT OPEN SEMENT) ROTO SS 42 P-4020 SUPPORT WSHER, ROTO OPER, ROTO HDWE. (SS) ROTO SS 43 P-4021 #8-32 x 3/4" Quad FH W/ 1/1" Lead, MS, SS, ROTO OP., ROTO HDWE. FSTENL SS 44 P-4024 GSKET, ROTO OPER., ROTO HDWE., 1/1" HOP 45 P-4031-P-4040 TIE-RS, ROTO HDWE. 1-5 LOKPOINTS, SS (Y O HGT.) ROTO SS 4 P-4050 REINF. OIL-LUMINUM, 5052-H32 ( ), HD PREISION STEEL LUM 47 P-4043 STRIKE, MULTIPOINT M&M NYLON 48 P-414 #8 x 3/4" PH FLT TEK, SS FSTENL SS 49 P-4491 REINF. OIL-LUMINUM, 5052-H32 (.02.5), HD PREISION STEEL LUM 50 P-441 #8 x 5/8" PH FLT TEK, #7 HED, SS FSTENL SS 51 S-1505 REINF. SE. SSH KEYMRK LUM 52 S-04 GLZ. D., 7/8" MIKRON PV 3 21/32" 2 1/4" 4 1/2" PV FLNGE FRME H /32" 1 9/32" 3 1/8" 2 11/32" PV SSH H-008 SREEN RIL SIDE/TM H /8" 10 PV FIN FRME H PV GLZING ED S-04 21/32" 1/2" 7/32" 27/32" 1/1" OIL,.02.5 P /32" 1 9/32" SREEN RIL TOP/SIDE H /4" 11/1" 52 SSH REINF. S " 7/1" /1" SREW SUPPORT P-3113 OIL, P OL, FLORID /05/07 WS-11 UPDTED PER 2014 F UPDTED PER 2010 F F UPDTE 03/17/08 LUS. TURNER, P.E JR VE. DESRIPTION: DRWN Y: SLE: 2: PV SEMENT IMPT Y: 4 OF DESRIPTION:

5 12 1/2" M. O.. " M. " M. 12 1/2" M. O.. " M. " M. 8" M. O.. 4" M. 4" M. 8" M. O.. 4" M. 4" M. OL, FLORID " M. O.. 8" M. O.. 8" M. O PV SEMENT IMPT NHOR LYOUT - (FLNGE) FOR UNITS UP TO 37" x 72" 14 3/4" M. O.. INSTLLTION NHOR NHOR LYOUT - (FLNGE) FOR UNITS UP TO 37" x 3" INSTLLTION NHOR " THRU FRME NHOR HINGE SIDE JM NHOR LYOUT - (FIN) FOR UNITS UP TO 37" x 72" INSTLLTION NHOR " THRU FRME NHOR HINGE SIDE JM NHOR LYOUT - (FIN) FOR UNITS UP TO 37" x 3" UPDTED PER 2014 F UPDTED PER 2010 F F UPDTE 03/17/08 Y: DESRIPTION: NOTES: 1. INSTLL ONE NHOR T EH INSTLLTION LOTION. SILL NHOR SPING SME S HED. 2. SHIM S REQ T EH INSTLLTION NHOR USING LOD ERING SHIMS. M. LLOWLE SHIM STK TO E 1/4". USE SHIMS WHERE SPE GRETER THN 1/1" IS PRESENT. LOD ERING SHIMS SHLL E ONSTRUTED OF HIGH DENSITY PLSTI OR ETTER. WOOD SHIMS RE NOT LLOWED. 3. NHOR TYPE, SIZE, SPING ND EMEDMENT SHLL E S SPEIFIED IN THESE DRWINGS,,. 4. LL INSTLLTION NHORS MUST E M OF OR PROTETED WITH ORROSION RESISTNT MTERIL OR OTING. DISSIMILR METLS OR MTERILS IN ONTT WITH PRESSURE TRETED WOOD MUST E PROTETED TO PREVENT RETION. 5. INSTLLTION NHORS SHLL E IN ORDNE WITH NHOR MNUFTURER'S INSTLLTION INSTRUTIONS, ND NHORS SHLL NOT E USED IN SUSTRTES WITH STRENGTHS LESS THN THE MINIMUM SPEIFIED IN TLE 1,.. NHOR EMEDMENT TO SUSTRTE SHLL E EYOND WLL DRESSING OR STUO. FOR ONRETE/MU OPENINGS, EMEDMENT SHLL E EYOND WOOD UKS, IF USED, INTO SUSTRTE. INSTLLTIONS TO SOLID ONRETE OR GROUT-FILLED MU MY INLUDE UT DO NOT REQUIRE 1 WOOD UKS ETWEEN THE PRODUT ND THE SUSTRTE. INSTLLTIONS TO HOLLOW MU REQUIRE THE USE OF 1 UKS ETWEEN THE PRODUT ND SUSTRTE. 7. MINIMUM ENTER-TO-ENTER SPING SHLL E MINTINED ETWEEN LL FSTENERS: 3" FOR MSONRY, 1" FOR WOOD ND METL. 8. WOOD OR MSONRY OPENINGS, UKS ND UK FSTENERS SHLL E PROPERLY DESIGNED Y THE RHITET OR ENGINEER OF REORD ND INSTLLED TO TRNSFER WIND LODS TO THE STRUTURE. SUSTRTES SHLL MEET THE MINIMUM STRENGTH REQUIREMENTS S SHOWN IN TLE1,. ONRETE ND MSONRY SUSTRTES MY NOT E RKED. 9. SELING ND FLSHING STRTEGIES FOR OVERLL WTER RESISTNE OF INSTLLTION SHLL E DONE Y OTHERS FOLLOWING THE URRENT VERSION OF THE REFERENE DOUMENTS: FM/M 100(FIN WINDOWS), FM/M 200(FLNGE WINDOWS), FM/WDM 250(O WINDOWS), FM/M/WDM 300(ETERIOR DOORS) LUS. TURNER, P.E JR VE. DESRIPTION: NHOR SHEDULE & NOTES DRWN Y: 05/05/07 WS-11 SLE: 1:20 5 OF

6 TYPIL HED NHORGE INTERIOR MIN. EMEDMENT 1/4" M. SHIM SUSTRTE Y OTHERS 1/4" M. SHIM SUSTRTE Y OTHERS OL, FLORID SUSTRTE Y OTHERS Y INSTLLER MIN. EMEDMENT INSTLLTION NHOR MIN. EMEDMENT 8400 PV SEMENT IMPT SELNT EHIND FLNGE Y INSTLLER INSTLLTION NHOR SELNT EHIND FLNGE Y INSTLLER INTERIOR 1/4" M. SHIM 1/4" M. SHIM HORIZONTL SETION TYPIL JM NHORGE Y INSTLLER SELNT EHIND FLNGE Y INSTLLER HORIZONTL SETION Y INSTLLER INSTLLTION NHOR SELNT EHIND FIN Y INSTLLER TYPIL FIN NHORGE HED ND SILL SIMILR FOR FIN INSTLLTION NOTE: DDITIONL THRU-FRME NHORS (S SHOWN IN DET. /) REQ'D T THE HINGE SIDE JM, SEE 5 NHOR LYOUT. UPDTED PER 2014 F UPDTED PER 2010 F F UPDTE 03/17/08 Y: DESRIPTION: Y INSTLLER MIN. EMEDMENT SUSTRTE Y OTHERS SELNT UNDER SREW HED Y INSTLLER VERTIL SETION TYPIL SILL NHORGE FRME TYPE SUSTRTE TYPE NHOR TYPE MIN. EMEDMENT FLNGE ONRETE (2.0 KSI MIN.) 3/1" ITW TPON 1-1/2" 1-1/8" FLNGE HOLLOW OR GROUT-FILLED MU (117 PF MIN.) 3/1" ITW TPON 1" 2" FLNGE ONRETE (2.85 KSI MIN.) 3/1" ELO ULTRON 1" 1" FLNGE GROUT-FILLED MU (STM -90) 3/1" ELO ULTRON 1-1/4" 2-1/2" FLNGE 2 MIN. SOUTHERN PINE (G=0.55) 3/1" ITW TPON OR ELO ULTRON 1-3/8" 7/8" FLNGE 2 MIN. SOUTHERN PINE (G=0.55) #10 WOOD SREW 1-3/8" 7/8" FLNGE FLNGE 1 GUGE (0.00") MIN. STEEL STUD (33 KSI YIELD MIN) 1/8" LUM. (03-T5 MIN.) OR 1/8" STEEL (33 KSI MIN.) TLE 1: PPROVED INSTLLTION FSTENERS #10-1 HILTI KWIK-FLE OR ITW TEKS SELF-DRILLING SREW #10 GR 5 SELF-TPPING / DRILLING SREW FULL THRED THRU 0.00" FULL THRED THRU 0.125" FIN 2 MIN. SPRUE-PINE-FIR (G=0.42) #8 WOOD SREW 1-1/2" 7/1" 7/1" 7/1" Y INSTLLER D HORIZONTL SETION O FRME INSTLLTION HED ND SILL SIMILR FOR O INSTLLTION FLNGE REMOVL NOTE: PRTILLY OR FULLY REMOVING THE FLNGE, UP TO ND INLUDING O-FRME PPLITION IS EPTLE PROVIDED: - MIN. 1/4" FILLET OF ONSTRUTION-GR DHESIVE ULK IS PPLIED, FULL PERIMETER, Y INSTLLER. - PRODUT NHORGE IS IN ORDNE WITH REQUIREMENTS S SHOWN FOR FLNGE WINDOWS. LUS. TURNER, P.E JR VE. DESRIPTION: INSTLLTION DETILS DRWN Y: 05/05/07 WS-11 SLE: 1:2 OF