WINDOW ASM-ATWOOD CHT WINDOW ASM-SE-GI CHT SCREW G U (14) 715 VENT-POWER

Transcription

1 8 7 RELESE REV DTE DWG NO REV ZONE REVISION REORD DTE DFTR-ORIG D 09 WINDOW SM-TWOOD HT WINDOW SM-SE-GI 78-0-HT G-08-08U (0) OVER-WEEPHOLE HT()(FTER ) WINDOW SM-TWOOD HT () WINDOW SM-SE-GI HT () RKET 90-0-HT () G-08-08U () TPE (00) 09 D 09 WINDOW SM-TWOOD 08--HT WINDOW SM-SE-GI 78--HT G-08-08U (0) WINDOW SM-TWOOD 0-07-HT WINDOW SM-SE-GI 78-0-HT G-08-08U () 09 M VENTILTOR-ROOF,POWERED HT 8-0-HT () VENT 88-0-HT GRNISH HT 00-0-HT () VENT-ROOF,POWERED HT 88-0-HT (S) GRNISH HT 00-0-HT () SKYLITE INSTL-SHOWER STIKER-MODEL 7-0-HT 09 WINDOW SM-TWOOD 8-0-HT WINDOW SM-SE-GI HT G-08-08U () OVER-WEEPHOLE HT(FTER ) WINDOW SM-TWOOD 8-0-HT WINDOW SM-SE-GI HT 09 WINDOW SM-TWOOD HT WINDOW SM-SE-GI 78-0-HT 09 G-08-08U (0) VENT SM-MIROWVE HT OVER-VENT,MIRO HT G-08-U () WINDOW SM-TWOOD -0-HT WINDOW SM-SE-GI HT 09 G-08-08U () 09 WINDOWS - SE-GI M VENT-POWER VENTILTOR 7 VENT-POWER VENT-NON-POWERED OPYRIGHT 009 WINNEGO R INDUSTRIES, IN. DFTR ORIG. DTE HKR LL DIMENSIONS RE P.E. IN MILLIMETERS M.E. FIRST USED DSNR 0 JH UNSPEIFIED TOLERNES RE: WHOLE DIM (X) MTERIL: ONE-PLE (X.X) TWO-PLE (X.XX) NGLE THIRD NGLE PROJETION NOTES:. ESPE WINDOW. FIX SREEN IN LOSED POSITION WINDOW SM-TWOOD 09-0-HT WINDOW SM-SE-GI HT G-08-08U () 09 TITLE: DO NOT SLE DRWING ODY INSTL-WINDOWS & VENTS PRT NO REV SHEET OF REF: 0/7/009

2 8 7 RELESE REV DTE DWG NO 080 REV ZONE REVISION REORD DTE DFTR-ORIG D SKYLITE INSTL 080- EP 080- (UP TO ,) 080-,DL,HT 080- V,9T,,J 080- EK D,DJ,R0D K,P,78,JH,(FTER ,) D TRIM () 000G7-0-9 PNEL EK,D,DJ,R0D EP,(UP TO ) V,9T,,J 9-0-0,DL,K,P,78,HT,JH,(FTER ,) ROOF (REF) ROOF REF R OPYRIGHT 009 WINNEGO INDUSTRIES, IN. 000G-08- P PNEL EK EP (UP TO ) 9-0-0,DL,HT V,9T,,J D,DJ,R0D K,P,78,JH,(FTER ,) SILIONE-SELNT -0-0 SHOWER STLL (REF) DFTR HKR P.E. M.E. DSNR UNSPEIFIED TOLERNES RE: WHOLE DIM (X) ONE-PLE (X.X) TWO-PLE (X.XX) NGLE THIRD NGLE PROJETION ORIG. DTE LL DIMENSIONS RE IN MILLIMETERS FIRST USED MTERIL: 8 & ODY DO NOT SLE DRWING. SELNT PPLIED LL ROUND ENTER OF FLNGE OR GROOVE. SETION - SKYLITE INSTL PRT NO NOTES: SHEET OF 080 TITLE: REV 8 7 REF: REF: /8/009

3 E OVER - VENT J E SLIDE R - VENT LID JRP E HNDLE - RNK - LK E SREEN JRP E HNDLE - RNK - WHITE JRP E SEL - DOME - 8" JRP , E OVER - VENT J E SLIDE R - VENT LID JRP E SWITH-LK/PUSH UTTON E HNDLE - RNK - LK E SREEN JRP E HNDLE - RNK - WHITE JRP E GER-DRIVE RP-0-.0 P SIZE E OVER - VENT J E SLIDE R - VENT LID JRP E MOTOR-LIFT, W/RKT-GER / JRP E SREEN J E GER-DRIVE RP-0-.0 P SIZE E GER-PINION F/LIFT MOTOR RP-0 - DIME SIZE E OVER - VENT J E SLIDE R - VENT LID JRP E MOTOR-LIFT, W/RKT-GER / JRP E SREEN J OPYRIGHT 009 WINNEGO INDUSTRIES IN.

4 E OVER - VENT W/HINGE & SLIDE K E MOTOR & FN LDE W/RKET XK E LDE/FN - " OPQUE WHT E SEL/RUER- /' W/GLUE K E SE/MIN - W/LOK/SEL/RM XK E SWITH - SFETY E RM-LIFT SSEMLY, UTOMTI E SWITH - MIN - SPEED E FUSE HOLDER W/MP FUSE/KNO K E KNO-LK/UTOMTI LIFT MTR K E MOTOR-UTO LIFT-WHT P/EXT 00-8 NS E SREEN - POP N LOK E SWITH - UP/DOWN (DM SERIES) E TRVEL LOK SSEMLY E GRNISH- /"LMP STY-WHT XK E IRUIT ORD 0/0J / M0JKI ONTT WINNEGO PRT SLES FOR UNLISTED OMPONENT(S) 0 OPYRIGHT 009 WINNEGO INDUSTRIES IN.

5 E GLSS - STTIONRY E VINYL - GLZING, UTYL E RETINER - TRIM H97L 99 GRL OPYRIGHT 009 WINNEGO INDUSTRIES IN.

6 E GLSS - STTIONRY E VINYL - GLZING, UTYL E RETINER - TRIM H707L OPYRIGHT 009 WINNEGO INDUSTRIES IN.

7 KEY PRT NUMER U/M DESRIPTION VENDOR NO E GLSS - STTIONRY E GLSS-SLIDING W/SSH & LTH FH00G E SREEN SM FT VINYL - GLZING FT HNNEL-RUN, SLIDING FT PLUG - FILLER E RETINER - TRIM H E LTH-HORIZONTL SLIDE-LK FH000-K E LTH-HORIZONTL SLIDE-RED FH00-K E SLIDE STOP FT FIN SEL-F/LOKING RIL-LK 7-0

8 08-0-0, /0 KEY PRT NUMER U/M DESRIPTION VENDOR NO E GLSS - STTIONRY E GLSS-SLIDING W/SSH & LTH FH009G E SREEN SM FT VINYL - GLZING FT HNNEL-RUN, SLIDING FT PLUG - FILLER E RETINER - TRIM H E LTH-HORIZONTL SLIDE-LK FH000-K E LTH-HORIZONTL SLIDE-RED FH00-K E SLIDE STOP FT FIN SEL-F/LOKING RIL-LK , KEY PRT NUMER U/M DESRIPTION VENDOR NO E GLSS - STTIONRY E GLSS-SLIDING W/SSH & LTH FH00G E SREEN SM FT VINYL - GLZING FT HNNEL-RUN, SLIDING FT PLUG - FILLER E RETINER - TRIM H E LTH-HORIZONTL SLIDE-LK FH000-K E LTH-HORIZONTL SLIDE-RED FH00-K E SLIDE STOP FT FIN SEL-F/LOKING RIL-LK , KEY PRT NUMER U/M DESRIPTION VENDOR NO E GLSS - STTIONRY E GLSS-SLIDING W/SSH & LTH FH000G E SREEN SM FT VINYL - GLZING FT HNNEL-RUN, SLIDING FT PLUG - FILLER E RETINER - TRIM H E LTH-HORIZONTL SLIDE-LK FH000-K E LTH-HORIZONTL SLIDE-RED FH00-K E SLIDE STOP FT FIN SEL-F/LOKING RIL-LK 7-08

9 08--0, KEY PRT NUMER U/M DESRIPTION VENDOR NO E GLSS - STTIONRY E GLSS-SLIDING W/SSH & LTH FH00G E SREEN SM FT VINYL - GLZING FT HNNEL-RUN, SLIDING FT PLUG - FILLER E RETINER - TRIM E LTH-HORIZONTL SLIDE-LK FH000-K E LTH-HORIZONTL SLIDE-RED FH00-K E SLIDE STOP FT FIN SEL-F/LOKING RIL-LK 7-08

10 08-0-0, KEY PRT NUMER U/M DESRIPTION VENDOR NO E GLSS - STTIONRY E GLSS-SLIDING W/SSH & LTH FH0G E SREEN SM FT VINYL - GLZING FT HNNEL-RUN, SLIDING FT PLUG - FILLER E RETINER - TRIM H E LTH-HORIZONTL SLIDE-RED FH00-K E LTH-HORIZONTL SLIDE-LK FH000-K E SLIDE STOP FT FIN SEL-F/LOKING RIL-LK KEY PRT NUMER U/M DESRIPTION VENDOR NO E GLSS - STTIONRY E GLSS-SLIDING W/SSH & LTH FH007G E SREEN SM FT VINYL - GLZING FT HNNEL-RUN, SLIDING FT PLUG - FILLER E RETINER - TRIM H E LTH-HORIZONTL SLIDE-LK FH000-K E LTH-HORIZONTL SLIDE-RED FH00-K E SLIDE STOP FT FIN SEL-F/LOKING RIL-LK KEY PRT NUMER U/M DESRIPTION VENDOR NO E GLSS - STTIONRY E GLSS-SLIDING W/SSH & LTH FH0G E SREEN SM FT VINYL - GLZING FT HNNEL-RUN, SLIDING FT PLUG - FILLER E RETINER - TRIM H E LTH-HORIZONTL SLIDE-LK FH000-K E LTH-HORIZONTL SLIDE-RED FH00-K E SLIDE STOP FT FIN SEL-F/LOKING RIL-LK 7-08

11 8 7 ROSS SETION /0 KEY PRT NUMER U/M DESRIPTION VENDOR NO E GLSS - STTIONRY E GLSS-SLIDING W/PULL & LTH FH0G FT PLUG - FILLER FT VINYL - GLZING FT HNNEL-RUN, SLIDING E RETINER - TRIM H E SREEN SM E LTH-VERTILE SLIDE-LK FH0-K KEY PRT NUMER U/M DESRIPTION VENDOR NO E GLSS - STTIONRY E GLSS-SLIDING W/PULL & LTH FH0G E PLUG - FILLER E VINYL - GLZING E HNNEL-RUN, SLIDING E RETINER - TRIM H E SREEN SM E LTH-VERTILE SLIDE-LK FH0-K

12 KEY PRT NUMER U/M DESRIPTION VENDOR NO E GLSS - STTIONRY E GLSS-SLIDING W/PULL & LTH FH0G FT PLUG - FILLER FT VINYL - GLZING FT HNNEL-RUN, SLIDING E RETINER - TRIM H E SREEN SM E LTH-VERTILE SLIDE-LK FH0-K KEY PRT NUMER U/M DESRIPTION VENDOR NO E GLSS - STTIONRY E GLSS-SLIDING W/PULL & LTH FH E PLUG - FILLER FT VINYL-GLZING E HNNEL-RUN, SLIDING E RETINER - TRIM H E SREEN SM E LTH KIT - F/VERTIL SLIDE - LK FH0-K E FIN SEL-F/LOKING RIL-LK KEY PRT NUMER U/M DESRIPTION VENDOR NO E GLSS - STTIONRY E GLSS-SLIDING W/PULL & LTH FH0G FT PLUG - FILLER FT VINYL - GLZING FT HNNEL-RUN, SLIDING E RETINER - TRIM H E SREEN SM E LTH-VERTILE SLIDE-LK FH0-K KEY PRT NUMER U/M DESRIPTION VENDOR NO E GLSS - STTIONRY E GLSS-SLIDING W/PULL & LTH FH09G E PLUG - FILLER FT VINYL-GLZING E FIN HNNEL-RUN, SLIDING E RETINER - TRIM H E SREEN SM E LTH KIT - F/VERTIL SLIDE - LK FH0-K

13 KEY PRT NUMER U/M DESRIPTION VENDOR NO E GLSS - STTIONRY E RETINER - TRIM H FT VINYL - GLZING -07

14 E GLSS-TIPOUT - W/HINGE/RIL DTH0G E SREEN SM FT WETHERSTRIP - GLSS(FIN SEL) E HNDLE-DIL E OPERTOR - TIPOUT/LRGE FT FELT SEL E RETINER - TRIM DTH FT SEL-VENT FT OVER - DRIN SLOT -007 ONTT WINNEGO PRTS SLES FOR FOR UNLISTED OMPONENT(S) E GLSS-TIPOUT - W/HINGE/RIL DTH08G E SREEN SM DTH FT WETHERSTRIP - GLSS(FIN SEL) E HNDLE-DIL E OPERTOR - TIPOUT/LRGE FT FELT SEL E RETINER - TRIM DTH FT SEL-VENT E OVER - DRIN SLOT E HNDLE/RH-EGRESS(SLD)ES-RED E HNDLE/LH-EGRESS(SLD)ES-RED FT SEL/SPONGE FOM-SREEN/FRME FT SEL - SPONGE RUER ONTT WINNEGO PRTS SLES FOR FOR UNLISTED OMPONENT(S) 9 OPYRIGHT 009 WINNEGO INDUSTRIES IN.

15 E GLSS-TIPOUT - W/HINGE/RIL DTH07G E SREEN SM DTH FT WETHERSTRIP - GLSS(FIN SEL) E HNDLE-DIL E OPERTOR - TIPOUT/LRGE FT FELT SEL E RETINER - TRIM DTH FT SEL-VENT FT SEL/SPONGE FOM-SREEN/FRME E OVER - DRIN SLOT -007 ONTT WINNEGO PRTS SLES FOR FOR UNLISTED OMPONENT(S) E GLSS-TIPOUT W/GUIDE RIL DTH0G E SREEN SM FT WETHERSTRIP - GLSS(FIN SEL) E HNDLE-DIL E OPERTOR - TIPOUT/SMLL FT FELT SEL E RETINER - TRIM DTH FT SEL-VENT FT OVER - DRIN SLOT -007 ONTT WINNEGO PRTS SLES FOR FOR UNLISTED OMPONENT(S) E GLSS-TIPOUT - W/HINGE/RIL DTH07G E SREEN SM DTH FT WETHERSTRIP - GLSS(FIN SEL) E HNDLE-DIL E OPERTOR - TIPOUT/LRGE FT FELT SEL E RETINER - TRIM DTH FT SEL-VENT FT OVER - DRIN SLOT -007 ONTT WINNEGO PRTS SLES FOR FOR UNLISTED OMPONENT(S) OPYRIGHT 009 WINNEGO INDUSTRIES IN.

16 E SREEN SM SREEN E SREEN SM SREEN E SREEN SM SREEN E LMP RING 80.R E LMP RING SREEN88.7.R E LMP RING SREEN OPYRIGHT 00 WINNEGO INDUSTRIES IN.

17 8 7 DWG NO RRIER-REVEL, WINDSHIELD RELESE REV ZONE REV DTE REVISION REORD DWG NO 9 DTE DFTR-ORIG D PRIMER-METL D WINDSHIELD WINDSHIELD GLSS PRIMER-GLSS,LER PRIMER-GLSS,LK SETION - UMPER () LOK () OT WITH HT. TRIM-WINDSHIELD, PILLR 8--0 MOLDING-REVEL () J-SERIES 9-0 OT WITH SELER KFILL WITH HT. URETHNE DHESIVE-SELNT IS PPLIED ROUND THE PERIMETER OF THE GLSS. PLEMENT ETWEEN STEEL ND GLSS PPROXIMTE LOTION. TOLERNE TO E.0 OVERLL WITH MXIMUM.0 VRITION IN NY 00.0 LENGTH. MISLIGNMENT ETWEEN DJENT ENDS NOT TO EXEED.. TOLERNE: SETION - SEL RRIER-REVEL,WINDSHIELD ()(UP TO ) (FTER ) SELER-TPE ()(FTER ) 000G-07-08()(FTER ) GLSS-WINDSHIELD WINDSHIELD GLSS RRIER-REVEL, WINDSHIELD. PTURE ENDS OF TOP ND OTTOM MOLDINGS UNDER -PILLR TRIM. NOTE: ONLY SOLVENT EQUIVLENT TO GM #998 MY E USED TO PREVENT HRDENING OF PRIMER PPLITION RUSH RISTLES. ONLY SOLVENT EQUIVLENT TO GM #998 MY E USED FOR ON-LINE LEN UP ND MINTENNE OF URETHNE EQUIPMENT. UTION: USE OF UNUTHORIZED SOLVENTS ND LENING MY INTERFERE WITH PROPER URE OF URETHNE DHESIVE. NOTE: FOR INSTLLTION ND SELING SEE SELNTS MNUL G-0-T() LIP-U 9-0-0() UMPER () INSTLLTION: SETION -. PPLY LER PRIMER P/N 8-0 IN.90 INH WIDE ND ON THE INSIDE OF THE GLSS ROUND THE ENTIRE PERIPHERY WITH LEN LINT FREE LOTH. NOTE: ROTTE LOTH FREQUENTLY TO LEN MOIST SETION OF LOTH. WIPE OFF EXESS PRIMER WITH LEN DRY LOTH ROTTING LOTH FREQUENTLY TO LEN SIDE. LLOW 0 MINUTE MINIMUM, HOUR MXIMUM SET TIME. USGE.0 ML. TRIM-WINDSHIELD, PILLR 8--HT OPYRIGHT 009 WINNEGO R INDUSTRIES, IN. NOTE: GLSS SHOULD E FREE OF EXESS DUST EFORE PPLYING LER PRIMER. WINDSHIELD GLSS PREPRTION SEL DFTR HKR ORIG. DTE LL DIMENSIONS RE NOTE: STEEL RE TO WHIH PRIMER IS PPLIED MUST NOT EXEED 00 F OR MIENT TEMPERTURE (WHIHEVER IS GRETER) T THE TIME OF PRIMER PPLITION. OWL-WINDSHIELD P.E. M.E. DSNR IN MILLIMETERS FIRST USED 08 G-SERIES. PPLY LER PRIMER P/N 8-0 IN.90 WIDE ND TO THE STEEL RE OF THE OPENING WITH LEN LINT FREE LOTH. NOTE: ROTTE LOTH FREQUENTLY TO LEN MOIST SETION OF LOTH. WIPE OFF EXESS PRIMER WITH LEN DRY LOTH ROTTING LOTH FREQUENTLY. LLOW 0 MINUTE MINIMUM, HOUR MXIMUM SET TIME. USGE.0 ML. UNSPEIFIED TOLERNES RE: WHOLE DIM (X) ONE-PLE (X.X) TWO-PLE (X.XX) NGLE. 0.0 MTERIL: THIRD NGLE NOTE: STEEL SHOULD E FREE OF EXESS DUST EFORE PPLING LER PRIMER. PROJETION VEHILE STEEL FLNGE PREPRTION. DO NOT SLE DRWING TITLE: WINDSHIELD INSTLLTION PROEDURE-URETHNE ONDED SYSTEM WINDSHIELD INSTL NOTES: SHEET OF PRT NO 9 REV 8 7 REF: 0//009

18 8 7 RELESE REV DTE DWG NO 07 REV ZONE REVISION REORD DTE DFTR-ORIG D D LMP () G U () HOSE TORQUE TO NM 0.NM (7 IN/LS.7 IN/LS.) RESERVIOR/PUMP,SM NUT D () WSHER E--00 () HOSE TORQUE TO NM.NM (0 IN/LS 0 IN/LS.) PPLY LOTITE NO. ( ) TO THREDS. HOSE WIPER MOTOR NOT TO E OPERTED UNLESS THE RMS ND LDES RE INSTLLED. 0 SUPPLIED WITH SHFT-DPTER. 9 TORQUE TO NM. NM ( IN LS IN LS). RETORQUE FTER MIN. OF 0 MINUTE WIT. 8 TORQUE TO 7.0 NM (0 IN LS). 7 DRIVERS SIDE LINK MUST E MOUNTED TO WIPER STUD RNK EFORE MOUNTING TO MOTOR RNK RM IN ORDER SHOWN. SUPPORT SM-WIPER Y79 D-SERIES E-SERIES DFTR R ORIG. DTE OPYRIGHT 009 WINNEGO INDUSTRIES, IN. ROUTE WSHER LINES LONG FRONT EDGE OF LOWER WINDSHIELD SUPPORT ND SEURE WITH PLSTI TIE (). PPLY LOTITE NO ( ) TO THREDS ND HND TIGHTEN NUT ONLY.. PPLY LURINT TO SURFE OF LL LL JOINTS () PRIOR TO SSEMLY OF LINKGE. SUPPLIED WITH PIVOT SHFT SM. RESERVOIR SM-WSHER (FORD) OLT -0-() (FORD) NUT D9-0-00U() (FORD) HKR P.E. M.E. DSNR UNSPEIFIED TOLERNES RE: WHOLE DIM (X) ONE-PLE (X.X). TWO-PLE (X.XX) 0.0 NGLE THIRD NGLE MTERIL: LL DIMENSIONS RE IN MILLIMETERS FIRST USED 08 G-SERIES PROJETION PRK LDES HORIZONTL TO TOP OF OWL SSEMLY.. FILL WSHER OTTLE WITH FLUID ND HEK SYSTEM OPERTION. NOTES: SEE HRT FOR OLOR VRITIONS OF THIS PRT TITLE: SHEET DO NOT SLE DRWING WIPER-WSHER INSTL PRT NO OF 07 REV 8 7 REF: 0//009

19 8 7 DWG NO 07 D RM-DRIVE,WIPER MOTOR SHFT SM-PIVOT,LH 90-0 E-SERIES 90-0 D-SERIES 90-0 J-SERIES NUT D-0-00 () LL STUD-DOULE NUT WSHER E-0-00U 8 0 FITTING-WIPER () TEE SHFT SM-PIVOT,RH 7-0 D-SERIES 7-0 J-SERIES 7-0 E-SERIES NUT D-0-00 () D WSHER 0 LINK-WIPER,PSSENGER SIDE NUT OMD9K MOTOR SM-WIPER () LINK-WIPER,DRIVER SIDE VIEW WIPER LDES NOT SHOWN (ROTTED 80 ) RM-WIPER,RDIL, 8" () LDE-W/S WIPER, 8" () NUT (REF) FLT WSHER (REF) RUER WSHER (REF) DIRETION OF ROTTION SERRTED DRIVER USHING (REF) ORIENT RED FITTING T 8 O'LOK POSITION ( PLS) GSKET-WIPER D-SERIES, J-SERIES MOTOR SM-WIPER (REF--SHOWN IN PRK POSITION) VIEW 9 ORN NUT (REF) INTERNL TOOTH WSHER (REF) RUER P (REF) SETION - ( PLS) FIRST USED 08 G-SERIES DO NOT SLE DRWING TITLE: WIPER-WSHER INSTL SHEET PRT NO 07 REV 8 7 0//009

20 , E NUT/ORN - HD W/.87 RL 0-0-NT7W E HRDWRE PKG - F/SHFT&PIVOT PSHWKIT E SEL P/RUER GROMMET E NUT/ORN - HD W/.87 RL 0-0-NT7W E HRDWRE PKG - F/SHFT&PIVOT PSHWKIT E SEL P/RUER GROMMET 0079 OPYRIGHT 009 WINNEGO INDUSTRIES IN.

21 E WSHER NOZZLE KIT W/HDW 97 OPYRIGHT 009 WINNEGO INDUSTRIES IN.