CLUTCH. clutch weights. helmets & accessories. clothing & accessories. gloves & accessories. boots & accessories. luggage. accessories.

Transcription

1 364 CLUTCH TEAM Steel Primary Springs Arctic Cat Primary Springs (steel) Force Color TM Lime Green - Yellow TM Lime Green - Purple TM Lime Green - White TM Lime Green - Orange TM Lime Green - Red Polaris Primary Springs (steel) Force Color TM Green TM Black TM White TM Red TM Orange TM Blue TM Purple TM Bright Yellow TM Bright Green TM Almond TM Silver Ski-Doo Primary Springs (steel) Force 74mm-42mm Color TM Yellow/Green TM Yellow/Blue TM Yellow/Red TM Yellow/Black TM Yellow/Orange TM Yellow/Silver TM Yellow/White TM Yellow/Purple TM Yellow/Light Blue TM Yellow/Gold TM Yellow/Pink TM Yellow/Lime Green TM Yellow/Almond TM Yellow/Purple/White Yamaha Primary Springs (steel) Force lbs. Force mm-33mm Color TM Blue w/white Stripe TM Blue w/yellow Stripe TM Blue w/green Stripe TM Blue w/silver Stripe TM Blue w/orange Stripe TM Blue w/purple Stripe TM Blue w/red Stripe TM Blue w/yellow/white Stripe weights Ski-Doo Adjustable Clutch Weights Available from 16.5 to 21.4 grams. For all Ski-Doo snowmobiles 2002 and older. TM Ski-Doo Pin Kit, 11 to 16.5 Grams TM Ski-Doo Pin Kit, 13.8 to19.4 Grams PART NUMBERS IN MAGENTA ARE NEW 364

2 PART NUMBERS IN MAGENTA ARE NEW Dalton Pro Helixes CLUTCH 365 Arctic Cat All of our helixes for Arctic Cat now have more race-bred features than ever. Taller, thicker points for better fit and durability; total machining inside and out for perfect roundness; and extra machining on the base to allow more travel of the roller cover. ANGLE CAT. # 62/ / / DALTON PRO FLYWEIGHTS FOR ARCTIC CAT - LARGE PIN Many of the 04 Arctic Cat models feature the new large pin. The new Dalton DPA-W (wide) series of flyweights are a direct bolt-in for the new. Sold in packages of three. DPAW66 66 grams DPAW68 68 grams Arctic Cat WITH ACT DIRECT DRIVE SYSTEM ANGLE CAT. # 50/40 C /40 C /42 C /40 C /42 C Ski-Doo POLARIS Dalton s new Polaris helixes feature a stainless steel hub (allowing for closer tolerances and premium corrosion and wear resistance) along with a hard anodized surface for less friction on the outer bushing. springs Manufactured from the highest quality material for dependability allows you to fine tune the shift hole, side load pressure and full shift out poundage all EPI springs listed here are manufactured with a 5% tolerance shot penned for durability ANGLE CAT. # 40/ / / / / / Note: Our Ski-Doo helix angles are measured the same as Ski-Doo Dalton s new Ski-Doo helices feature a stainless steel hub (allowing for closer tolerances and premium corrosion and wear resistance) along with a hard anodized surface for less friction on the outer bushing. Yamaha Primary () Springs * Racing Application 2 1/2 1 1/4 ARCTIC CAT & POLARIS LOAD LOAD YELLOW* SILVER RED BLACK ORANGE pink* maroon* gold* SKI DOO LOAD LOAD BLUE GOLD BLACK RED GREEN ANGLE CAT. # / ANGLE CAT. # RER (electronic reverse) 50/ / / / / / Extensive machining to be lightweight like the OEM castings, but with the attractive strength of solid billet aluminum, bushing included. ANGLE CAT. # Secondary (n) Springs 2 1/2 1 7/16 1 1/4 ARCTIC CAT LOAD LOAD LOAD PURPLE * WHITE * Designed for Highest Horse Power Sleds NOTE: Stock A/C spring 91# at 1-7/16 load 2 1/2 1 1/4 POLARIS LOAD LOAD GREEN RED WHITE PURPLE ORANGE SILVER WHITE SKI DOO LOAD LOAD ORANGE RED MAROON WHITE PURPLE ORANGE YELLOW SILVER WHITE GREEN note: Stock s/d Beige Spring Spec in

3 366 CLUTCH POLARIS P85 / P90 CLUTCH REBUILD KITS PART NUMBERS IN MAGENTA ARE NEW Roller Kits Complete Kits Kit Contents - 1 Cover bushing and retainer - 1 Moveable bushing and retainer 3 3 Rollers 3 3 Roller Pins 6 6 Roller Washers 6 6 Buttons Button Shims - 3 Weight pins and nuts The P85 comes on most Polaris snowmobiles except: All Indy Lites, all Indy Sports, Super Sport. CAT. # Application Clutch TM with wide rollers P TM with narrow rollers P TM with wide rollers except below P TM RMK, 800 XC P TM Sports, Lites P TM Spider rebuild kit with narrow rollers P85/P TM Spider rebuild kit with wide rollers 1 pin P85/P TM Spider rebuild kit with wide rollers 1 1/8 pin P85/P Models with wide rollers: 2002 All Models Storm/XCR XCR XC/RMK XC/RMK XC/RMK XCR 366 TM OEM# POLARIS RAPID REACTION CLUTCH ROLLERS 340 Classic Edge LX Edge Touring Indy Touring Indy Pro X IQ XC SP Classic Edge LX Indy Pro X Cleanfire Switchback Classic Edge Touring Edge Touring 50th HO IQ F/O HO IQ Tour. Clnfire/Euro HO IQ/LX Cleanfire HO Switchback F/O RMK Switchback XC SP XC SP 50th /700/800 Indy Pro X /700/800 Indy Pro X Cleanfire Dragon/Euro RMK Switchback XC SP XC SP Luxury /800 Classic /800 Classic Touring Edge Touring Indy Pro XR RMK Switchback XC SP XC SP Luxury Fusion Fusion 50th Fusion SP RMK RMK 50th Switchback Dragon RMK/Intl 07 FS/FST IQ Touring 07 FST IQ Cruiser 07 FST IQ Switchback 07 FST IQ/LX 07 Supersport Edge 07 Sport Touring 04 Super Sport Indy Trail RMK Trail Touring, Deluxe 04-07

4 PART NUMBERS IN MAGENTA ARE NEW primary/secondary rebuild kits CLUTCH 367 Fits Polaris P85 with narrow roller K Kit contains 3 spider pins 3 rollers 3 pins 3 shims (.01) 3 shims (.005) 6 shims (.002) 9 washers Bushings sold separately Large fiber bushing Small brass bushing Replacement Rollers D 5.30 Polaris rebuild kits Fits Polaris P85 with wide rollers 1989-present Kit contains 3 spider pins 3 rollers 3 pins 3 shims (.01) 3 shims (.005) 6 shims (.002) 9 washers Bushings sold separately Large fiber bushing Small brass bushing D 9.95 Replacement Roller B 6.35 SKI DOO primary rebuild kit Fits Ski Doo OEM # Grand Touring Grand Touring Grand Touring Formula 380 DLX 2000 Grand Touring Formula Grand Touring Formula 500 DLX , Grand Touring 800 SE 2001 Formula 500 F DLX 2001 Grand Touring SE Formula 500 LC 2000 Grand Touring SE Formula 500 LC DLX 2000 Millennium Edition 2000 Formula Legend 380F/500F 2002 Formula 583 DLX 1998 Legend 500/ Formula 600/700 DLX Legend 500 SS 2004 Formula III 1997 Legend Formula III 600/ Legend Formula III 600 LT 1998 Mach Formula III 600 R/700 R 1998 Mach 1 R Formula III 700 R 2000 Mach Z Formula III Mach Z LT Formula III LT 1997 Mach Z LT (SV Track) 1998 Formula S 1997, 2000 Mach Z LT R Formula SL Mach Z M.H.R 1999 Formula Z 1997 Mach Z R Formula Z Mach Z R Millennium Edition 2000 Formula Z 600/ MX Z 380 F/500 F 2002 Formula Z MX Z Grand Touring 380 F/500 F 2002 MX Z 440 F , 01 Polaris P85 secondary rebuild kit Kit contains 1 brass bushing 3 cam shoes MX Z 440 LC 1997 MX Z , MX Z 500 SB 2000 MX Z 583/ MX Z 583/Z MX Z 600 HO 2003 MX Z 600 SB 2000 MX Z 670 HO T.H MX Z MX Z 700 SB 2000 MX Z 700 SB Millennium Edition 2000 MX Z MX Z 800 REV 2002 MX Z X 400 LC MX Z X Skandic SUV 550F Europe Summit Summit 600 HO 2003 Summit 600/SB 2000 Summit Summit Summit 700 SB 2000 Summit Summit 800 HO 2003 Summit 800 H.M Summit H.M Yamaha YVXC primary rebuild kit 1988-present Kit contains 1 steel bushing 1 fiber bushing 3 hollow pins 3 steel pins 6 nylon washers 6 cam shoes YAMAHA rebuild kits Yamaha secondary rebuild kit Kit contains 2 brass bushings 3 cam shoes Mountain Max Mountain Max Mountain Max Phazer Phazer RX SRX SRX SX SX SX 600R 2003 SX 700 Except SX 700 Viper SX Venom 2004 V-Max 500/600/ VT VT VT VX VX VX VX

5 CLUTCH Replacement Nylon Cam Sliders for Driven Clutches PART NUMBERS IN MAGENTA ARE NEW REPLACEMENT CAM SHOES FOR SECONDARY CLUTCHES MADE FROM DURABLE NYLON AND TEFLON SOLD EACH ARCTIC CAT YEAR FRONT OEM # FRONT NYLON FRONT TEFLON REAR OEM # REAR NYLON ALL MODELS LP ALL MODELS EXCEPT KITTY LP LP03354T CHEETAH LP LP03354T CHEETAH LP03369T COUGAR LP LP03354T CROSS COUNTRY LP03369T EL TIGRE LP03369T KX EL TIGRE / LP LP03354T EL TIGRE / LP LP03354T JAG LP LP03354T JAG LP03369T JAG 340, LP LP03354T LYNX LP03369T PANTERA LP LP03354T PANTERA LP03369T PANTHER LP LP03354T PANTHER LP03369T KX SUPER JAG LP LP03354T KX031511T TRAIL CAT LP03369T Z LP03369T JOHN DEERE YEAR FRONT OEM # FRONT NYLON FRONT TEFLON REAR OEM # REAR NYLON ALL MODELS AM54278 LP LP03357T KAWASAKI YEAR FRONT OEM # FRONT NYLON FRONT TEFLON REAR OEM # REAR NYLON DRIFTER 340, LP03369T INTERCEPTOR LP LP03370T INTRIGUER LP03369T INTRUDER LP LP03370T INVADER 340, LP LP03370T KX INVITER LP03369T KX031514T 1.75 LTD LP LP03370T 1.40 MOTO-SKI YEAR FRONT OEM # FRONT NYLON FRONT TEFLON REAR OEM # REAR NYLON FUTURA, NUVIK LP MIRAGE LP SONIC LP SONIC L/C LP SPIRIT LP SUPER SONIC LP POLARIS YEAR FRONT OEM # FRONT NYLON FRONT TEFLON REAR OEM # REAR NYLON ***ALL MODELS INDY LP LP03359T ***MOST MODELS INDY LP LP03361T KX COLT 175, 250, 250 TWIN, LP KX031519T COLT 175, 250, LP GEMINI LP GEMINI, LP COLT 250,250 TWIN LP COLT 250, LP COLT S/S 250, , LP COTT S/S 250, LP CUSTOM II 250, 400, LP ELECTRA LP APOLLO LP CUTLASS LP COBRA 340, LP LP ELECTRA 340, LP GALAXY 340,440,440E LP EDGE/ EDGE CLASSIC KX KX031514T KX KX031513T L/C KX KX031513T PRO X KX KX031513T PRO X FAN COOLED KX KX031513T XCR KX KX031513T XCR SP , KX KX031513T CUTLASS SS 440, 440E LP LP GALAXY LP INDY KX KX031513T CLASSIC KX KX031513T CLASSIC KX KX031513T CLASSIC TOURING KX KX031513T EDGE KX KX031513T EFI KX KX031513T XC (ALL OPTIONS) KX KX031513T RMK KX KX031513T XC EDGE F/O KX KX031513T XC SP 1999, KX KX031513T XC SP EDGE KX KX031513T XC SP EDGE M-10 F/O KX KX031513T XC SP EDGE X F/O KX KX031513T

6 PART NUMBERS IN MAGENTA ARE NEW CLUTCH 369 POLARIS CONTINUED YEAR FRONT OEM # FRONT NYLON FRONT TEFLON REAR OEM # REAR NYLON 600 XCR KX KX031513T KX KX031513T RMK KX KX031513T RMK (ALL OPTIONS) KX KX031513T XC EDGE F/O KX KX031513T XC SP KX KX031513T LP RMK (ALL OPTIONS) KX KX031513T XC EDGE F/O KX KX031513T XC SP EDGE (ALL OPTIONS) KX KX031513T XCR KX KX031513T CLASSIC TOURING 93-94, KX KX031513T FRONTIER CLASSIC KX KX031513T FRONTIER TOURING KX KX031513T INDY LITE, DELUXE, GT KX KX031514T INDY TRAIL, DELUXE KX KX031514T SPORT LP SPORT, GT KX KX031514T LP SPORT, TOURING, SUPER SPORT KX KX031514T LP03354T 1.40 SS LP STAR LP STAR LT LP STARLITE KX KX031514T SUPER SPORT (SS) LP SUPERSPORT (ALL OPTIONS) KX KX031513T TC 175, LP TRANSPORT KX KX031514T TX 250, 340, 440, LP TX STARFIRE ,440, LP WIDETRAK LX KX KX031513T LP SCORPION YEAR FRONT OEM # FRONT NYLON FRONT TEFLON REAR LP03357T OEM # 1.95 REAR NYLON ***ALL MODELS LP SKI-DOO YEAR FRONT OEM # FRONT NYLON FRONT TEFLON REAR OEM # REAR NYLON ***ALL MODELS LP ADVENTURE V ALPINE II KX KX031511T ELAN LP ELITE EXPEDITION SPORT 550 F EXPEDITION SPORT V FORMULA DLX 380/ FORMULA KX KX031511T FORMULA 500 DELUXE KX KX031511T FORMULA 500 LC KX KX031511T FORMULA DELUXE 500 LC KX KX031511T FORMULA KX KX031511T FORMULA 583 DELUXE KX KX031511T FORMULA DELUXE KX KX031511T FORMULA DELUXE KX KX031511T FORMULA DELUXE KX KX031511T FORMULA III KX KX031511T FORMULA III 600 LT KX KX031511T FORMULA III 600 R KX KX031511T FORMULA III 600/ KX KX031511T FORMULA III 700 R KX KX031511T FORMULA III KX KX031511T FORMULA III LT KX KX031511T FORMULA MACH I KX KX031511T FORMULA MX KX KX031511T FORMULA PLUS KX KX031511T FORMULA S KX KX031511T FORMULA S FORMULA S ELECTRIC KX KX031511T FORMULA SL KX KX031511T FORMULA SL KX KX031511T FORMULA SLS KX KX031511T FORMULA SS KX KX031511T FORMULA STX KX KX031511T FORMULA STX LT(2) KX KX031511T FORMULA Z KX KX031511T FORMULA Z KX KX031511T FORMULA Z KX KX031511T FORMULA Z 600/ KX KX031511T FORMULA Z KX KX031511T FREESTYLE BACK, COUNTRY 550 F FREESTYLE PARK 550 F FREESTYLE SESSION 300 F FREESTYLE SESSION 550 F GRAND TOURING KX KX031511T GRAND TOURING KX KX031511T GRAND TOURING 500/600/

7 CLUTCH PART NUMBERS IN MAGENTA ARE NEW SKI-DOO CONTINUED YEAR FRONT OEM # FRONT NYLON FRONT TEFLON REAR OEM # REAR NYLON GRAND TOURING SE 500 SDI GRAND TOURING KX KX031511T GRAND TOURING KX KX031511T GRAND TOURING KX KX031511T GRAND TOURING 670SE KX KX031511T GRAND TOURING KX KX031511T GRAND TOURING KX KX031511T GRAND TOURING V GRAND TOURING SE KX KX031511T GSX SPORT 500 SS GSX 550 F GSX 600 HO GSX 600 HO SDI GSX SPORT 600 HO SDI GSX LTD 600 HO SDI GSX 800 HO GSX LTD 800 HO PTEK GTX SPORT 500 SS GTX 550 F GTX 600 HO SDI GTX SPORT 600 HO SDI GTX 600 HO GTX LTD 600 HO SDI GTX 800 HO GTX LTD 800 HO PTEK LEGEND 500 SS LEGEND 600 HO SDI LEGEND LEGEND SE 800 SDI LEGEND 800 SDI LEGEND TOURING V LEGEND TRAIL V LEGEND V MACH KX KX031511T MACH 1 R KX KX031511T MACH Z KX KX031511T MACH Z LT KX KX031511T MACH Z LT (2) KX KX031511T MACH Z LT (SV TRACK) KX KX031511T MACH Z LT R KX KX031511T MACH Z M.H.R KX KX031511T MACH Z R KX KX031511T MACH Z R MILLENNIUM EDITION KX KX031511T MACH, MXZ, FORMULA ST, STX, SS, SL, Z, SUMMIT KX KX031511T MX Z KX KX031511T MX Z 440 F KX KX031511T MX Z 440 F/500 F MX Z 440 LC KX KX031511T MX Z KX KX031511T MX Z 500/600/600 HO/700/ MX Z 500 SB KX KX031511T MX Z 500SS TRAIL/ADRENALINE KX KX031511T MX Z ADRENALINE 500 SS MX Z TRAIL 500 SS MX Z 550 F MX Z 550 X MX Z KX KX031511T MX Z KX KX031511T MX Z KX KX031511T MX Z 600 HO KX KX031511T MX Z 600 HO TRAIL/ADRENALINE/X KX KX031511T MX Z 600 HO SDI MX Z 600 HO ADRENALINE MX Z 600 HO SDI ADRENALINE MX Z 600 HO SDI, ADRENALINE & X MX Z 600 HO RENEGADE MX Z 600 HO RENEGADE, RENEGADE X MX Z 600 HO SDI RENEGADE, RENEGADE X MX Z 600 HO TRAIL, ADRENALINE & X MX Z REV 600 HO/ 800/007, SPECIAL EDITION MX Z 600 SB KX KX031511T MX Z 600 SB BLACK KX KX031511T MX Z KX KX031511T MX Z 670 HO KX KX031511T MX Z 670 HO T.H KX KX031511T MX Z KX KX031511T MX Z KX KX031511T MX Z 800 HO ADRENALINE & X MX Z 800 HO, ADRENALINE PTEK MX Z 800 HO RENEGADE, RENEGADE X

8 PART NUMBERS IN MAGENTA ARE NEW CLUTCH 371 SKI-DOO CONTINUED YEAR FRONT OEM # FRONT NYLON FRONT TEFLON REAR OEM # REAR NYLON MX Z BLAIR MORGAN, SPECIAL EDITION NORDIK 50, LP RANGER V SKANDIC 380, 500, TOURING KX KX031511T SKANDIC 380/ SKANDIC SKANDIC LT 440F SKANDIC TUNDRA 300 F SKANDIC TUNDRA LT 550 F SKANDIC TUNDRA V SKANDIC TUNDRA LT V SUMMIT 550 F SUMMIT 600 HO SDI, ADRENALINE SUMMIT 600 HO/700/800 HO SUMMIT X 800 HO SUMMIT 800 HO SUMMIT 800 HO, ADRENALINE & X SUMMIT 1000 SDI, HIGHMARK & HIGHMARK X SNO-JET YEAR FRONT OEM # FRONT NYLON FRONT TEFLON REAR OEM # REAR NYLON ALL MODELS LP ASTRO 340, LP03369T SST 340, LP03369T THUNDER JET LP03369T YAMAHA YEAR FRONT OEM # FRONT NYLON FRONT TEFLON REAR LP03359 OEM # 0.95 REAR NYLON BR 250, T, TS R KX KX031513T LP03359T EF X LP LP03353T EL LP ENTICER LP ET X LP LP03353T EW LP EX 340, X LP LP03353T EXCEL LP EXCEL V X LP LP03353T EXCITER X LP LP03353T GP LP GPX LP GS LP LP03369T INVITER LP MOUNTAIN LT AV KX KX031519T MOUNTAIN MAX 600/ AV KX KX031519T PHAZER X LP LP03353T PHAZER AV KX KX031519T RX-1/ER/LE AV KX KX031519T RX-1 MTN/LE AV KX KX031519T SL LP SM LP SR, SW LP LP SRV X LP LP03353T LP03370T 1.40 SRX R KX KX031513T SRX 600, AV KX KX031519T SS LP SS X LP LP03353T SSR X LP LP03353T SX AV KX KX031519T SX 700 VIPER ER AV KX KX031519T SX 700 VIPER MTN AV KX KX031519T SX VENOM/ER AV KX KX031519T SXR 600/ AV KX KX031519T SXV 700 VIPER AV KX KX031519T VENTURE X LP LP03353T TM VENTURE 500 XL AV KX KX031519T VENTURE 600/ AV KX KX031519T VK X LP LP03353T VMAX 500, AV KX KX031519T VMAX X LP LP03353T VMAX AV KX KX031519T VMAX AV KX KX031519T VMAX X LP LP03353T VT 500/600/ AV KX KX031519T XL-V X LP LP03353T Super Slippery Helix Ramp Buttons Helix Ramp Buttons are super slippery, longer lasting than stock. Sold each. Most Polaris SP ea CLUTCH BUTTON TOOL FOR POLARIS SECONDARY CLUTCHES Precision ground plier-like tool removes buttons quickly without damage. No vice is required and removal is very easy. 371

9 CLUTCH ARCTIC CAT YEAR OEM # NYLON qty BEARCAT KX Pkg of 3 BEARCAT 550 WT KX Pkg of 3 BEARCAT KX Pkg of 3 BEARCAT 570 INT L KX Pkg of 3 BEARCAT 570 LONG TRACK KX Pkg of 3 BEARCAT 570 LONG TRACK CANADIAN KX Pkg of 3 BEARCAT 570 LONG TRACK INT L KX Pkg of 3 BEARCAT WIDE TRACK KX Pkg of 3 BRARCAT WT 4 STROKE KX Pkg of 3 BEARCAT WIDE TRACK CANADIAN KX Pkg of 3 BEARCAT WIDE TRACK INT L KX Pkg of 3 FIRECAT F KX Pkg of 3 FIRECAT F KX Pkg of 3 FIRECAT F KX Pkg of 3 KING CAT KX Pkg of 3 KING CAT 900 EFI KX Pkg of 3 KING CAT 900 EFI EARLY BUILD KX Pkg of 3 MOUNTAIN CAT KX Pkg of 3 MOUNTAIN CAT 500, EFI KX Pkg of 3 MOUNTAIN CAT KX Pkg of 3 MOUNTAIN CAT 600 EFI, LE KX Pkg of 3 MOUNTAIN CAT 600 VEV KX Pkg of 3 MOUNTAIN CAT 800 EFI LE KX Pkg of 3 MOUNTAIN CAT KX Pkg of 3 MOUNTAIN CAT800, EFI KX Pkg of 3 PANTERA KX Pkg of 3 PANTERA 580 EFI KX Pkg of 3 PANTERA 600 EFI KX Pkg of 3 PANTERA 800 EFI KX Pkg of 3 PANTERA KX Pkg of 3 PANTHER KX Pkg of 3 PANTHER 370 (ALL) KX Pkg of 3 PANTHER 440, ESR KX Pkg of 3 PANTHER KX Pkg of 3 PANTHER KX Pkg of 3 PANTHER 570 ESR KX Pkg of 3 PANTHER 570 INT L KX Pkg of 3 PANTHER 580 EFI KX Pkg of 3 PANTHER 660 TOURING KX Pkg of 3 PANTHER 660 TOURING CANADIAN KX Pkg of 3 PANTHER 660 TOURING INT L KX Pkg of 3 PANTHER 660 TRAIL KX Pkg of 3 POWDER SPECIAL 600 EFI/LE KX Pkg of 3 POWDER SPECIAL 700/LE KX Pkg of 3 POWDERCAT KX Pkg of 3 SABERCAT 500/600/ KX Pkg of 3 SABERCAT KX Pkg of 3 SABERCAT 500 EFI KX Pkg of 3 SABERCAT 500 EFI LX KX Pkg of 3 SABERCAT 500 EFI LX INT L KX Pkg of 3 SABERCAT 500 LX KX Pkg of 3 SABERCAT 600 EFI KX Pkg of 3 SABERCAT 600 EFI EXT KX Pkg of 3 SABERCAT 600 EFI LX KX Pkg of 3 SABERCAT 700 EFI KX Pkg of 3 SABERCAT 700 EFI EXT KX Pkg of 3 SABERCAT 700 EFI EXT INT L KX Pkg of 3 SABERCAT 700 EFI LX KX Pkg of 3 T660 TOURING KX Pkg of 3 THUNDERCAT KX Pkg of 3 THUNFERCAT, M.C KX Pkg of 3 TOURING 4-STROKE KX Pkg of 3 TRAIL 4-STROKE KX Pkg of 3 TRIPLE TOUING KX Pkg of 3 Z 370 (ALL) KX Pkg of 3 Z 440 (ALL) KX Pkg of 3 Z 570 (ALL) KX Pkg of 3 ZL KX Pkg of 3 ZL KX Pkg of 3 ZL 550 (ALL) KX Pkg of 3 ZL KX Pkg of 3 ZL 600 (ALL) KX Pkg of 3 ZL KX Pkg of 3 ZL 800 EFI, ESR KX Pkg of 3 ZR 440 SNO PRO KX Pkg of 3 ZR 500 (ALL) KX Pkg of 3 ZR KX Pkg of 3 ZR 600 (ALL) KX Pkg of 3 ZR 700/LE KX Pkg of 3 ZR 800 (ALL) KX Pkg of 3 ZR 900 (ALL) KX Pkg of 3 ZR KX Pkg of 3 ZRT KX Pkg of 3 CHEETAH / WANKEL Pkg of 3 CHEETAH 340, Pkg of 3 CHEETAH 440, Pkg of 3 CROSS COUNTRY CAT Pkg of 3 PART NUMBERS IN MAGENTA ARE NEW Replacement rollers for secondary es made from durable nylon ARCTIC CAT continued YEAR OEM # NYLON qty EL TIGRE 295, Pkg of 3 EL TIGRE 340, Pkg of 3 EL TIGRE Pkg of 3 EL TIGRE 440, Pkg of 3 EL TIGRE Z 250, 340, Pkg of 3 JAG 275, Pkg of 3 JAG Pkg of 3 JAG Pkg of 3 JAG 340, LYNX Pkg of 3 LYNX I 292, Pkg of 3 LYNX II 340, Pkg of 3 PANTERA 340, Pkg of 3 PANTERA Pkg of 3 PANTHER WANKEL 295, Pkg of 3 PANTHER Pkg of 3 PANTHER Pkg of 3 PANTHER Pkg of 3 PANTHER 500 Z 250, Pkg of 3 BEARCAT WT TURBO Pkg of 6 BEARCAT WT TURBO ARTICULATING Pkg of 6 BEARCAT WT TURBO INT L Pkg of 6 CROSSFIRE 500 (ALL) Pkg of 6 CROSSFIRE 600 (ALL) Pkg of 6 CROSSFIRE 700 (ALL) Pkg of 6 CROSSFIRE 800 (ALL) Pkg of 6 CROSSFIRE 1000 (ALL) Pkg of 6 F5 (ALL) Pkg of 6 FIRECAT 500 (ALL) Pkg of 6 F570 EFI / INT L Pkg of 6 F6 (ALL) Pkg of 6 FIRECAT 600 (ALL) Pkg of 6 FIRECAT 700 (ALL) Pkg of 6 F8 (ALL) Pkg of 6 F1000 (ALL) Pkg of 6 JAGUAR Z (ALL) Pkg of 6 M5 (ALL) Pkg of 6 M6 (ALL) Pkg of 6 M7 (ALL) Pkg of 6 M8 (ALL) Pkg of 6 M1000 EFI (ALL) Pkg of 6 T500 EFI Pkg of 6 T570 EFI / INT L Pkg of 6 T660 TURBO (ALL) Pkg of 6 TZ1 TOURING (ALL) Pkg of 6 ZR 900 (ALL) Pkg of 6 POLARIS YEAR OEM # NYLON qty 340 CLASSIC TM Ea 340 INDY TM Ea 340 TOURING TM Ea 440 INDY PRO X TM Ea 4440 IQ TM Ea 500 XC SP TM Ea 550 CLASSIC TM Ea 550 INDY PRO X TM Ea 600 CLASSIC TM Ea 600 EDGE TOURING TM Ea 600 FUSION TM Ea 600 RMK TM Ea 600 SWITCHBACK TM Ea 600 XC SP TM Ea 600, 700, 800 INDY PRO X TM Ea 600, 700, 800 INDY PRO X TM Ea 700 CLASSIC TM Ea 700 FUSION TM Ea 700 RMK TM Ea 700 SWITCHBACK TM Ea 700 TOURING TM Ea 700 XC SP TM Ea 700, 800 CLASSIC TM Ea 700, 800 CLASSIC TOURING TM Ea 800 EDGE TOURING TM Ea 800 INDY PRO XR TM Ea 800 RMK TM Ea 800 SWITCHBACK TM Ea 800 XC SP TM Ea 900 FUSION TM Ea 900 RMK TM Ea 900 SWITCHBACK TM Ea FS CLASSIC TM Ea FS TOURING TM Ea FST CLASSIC TM Ea FST SWITCHBACK TM Ea FST TOURING TM Ea SPORT TOURING TM Ea SUPER SPORT INDY TM Ea TRAIL RMK TM Ea TRAIL TOURING, DELUXE TM Ea

10 PART NUMBERS IN MAGENTA ARE NEW SKIDOO YEAR OEM # NYLON TEFLON *ALL FORMULA MODELS W/ T.R.A. CLUTCH KX Ea KX03152T 1.75 ADVENTURE V KX Ea KX03152T 1.75 ELITE KX Ea KX03152T 1.75 EXPEDITION 4-TEC KX Ea KX03152T 1.75 EXPEDITION SPORT V KX Ea KX03152T 1.75 EXPEDITION TUV V KX Ea KX03152T 1.75 EXPEDITION V KX Ea KX03152T 1.75 EXPEDITION V KX Ea KX03152T 1.75 FORMULA III 600, 700, KX Ea KX03152T 1.75 GRAND TOURING 500/600/700/ KX Ea KX03152T 1.75 GRAND TOURING 700,SE KX Ea KX03152T 1.75 GRAND TOURING 800 SE KX Ea KX03152T 1.75 GRAND TOURING SE KX Ea KX03152T 1.75 GRAND TOURING SE 800 SDI KX Ea KX03152T 1.75 GRAND TOURING V KX Ea KX03152T 1.75 GSX SPORT 500 SS KX Ea KX03152T 1.75 GSX LTD 600 HO SDI KX Ea KX03152T 1.75 GSX LTD TOURING 600 HO SDI KX Ea KX03152T 1.75 GSX 800 HO KX Ea KX03152T 1.75 GSX LTD 800 HO PTEK KX Ea KX03152T 1.75 GSX LTD 800 R KX Ea KX03152T 1.75 GTX SPORT 500 SS KX Ea KX03152T 1.75 GTX LTD 600 HO SDI KX Ea KX03152T 1.75 GTX SPORT 600 HO SDI KX Ea KX03152T 1.75 GTX 800 HO KX Ea KX03152T 1.75 LEGEND 500/600/700/ KX Ea KX03152T 1.75 LEGEND 800 SDI KX Ea KX03152T 1.75 LEGEND SE 800 SDI KX Ea KX03152T 1.75 LEGEND TOURING V KX Ea KX03152T 1.75 LEGEND TRAIL V KX Ea KX03152T 1.75 LEGEND V KX Ea KX03152T 1.75 MACH 1, MACH Z KX Ea KX03152T 1.75 MACH Z KX Ea KX03152T 1.75 MACH Z 1000 SDI KX Ea KX03152T 1.75 MACH Z 1000 SDI ADRENALINE & X KX Ea KX03152T 1.75 MACH Z ADRENALINE KX Ea KX03152T 1.75 MACH Z X KX Ea KX03152T 1.75 MX Z 440 RACING KX Ea KX03152T 1.75 MX Z 500/600/700/ KX Ea KX03152T 1.75 MX Z 600 HO KX Ea KX03152T 1.75 MX Z 600 HO SDI ADRENALINE KX Ea KX03152T 1.75 MX Z 600 HO SDI RENEGADE KX Ea KX03152T 1.75 MX Z 600 RS KX Ea KX03152T 1.75 MX Z X 600 HO SDI RENEGADE X KX Ea KX03152T 1.75 MX Z REV 600HO/800/007 SPECIAL EDITION KX Ea KX03152T 1.75 MX Z KX Ea KX03152T 1.75 MX Z 800 HO ADRENALINE & X KX Ea KX03152T 1.75 ALL MODELS ski doo primary shoes made from durable nylon and teflon sold each Polaris Clutch Bushing Earlandson replacement bushing for the P85/P90 Polaris. Manufactured for OEM specifications or better. DESCRIPTION TYPE APPLICATION Movable Sheave Bushing (I.D..41 O.D..48) Up to 2007 models Primary Cover Bushing P85/P90 Up to 1997 models Primary Moveable Sheave Bushing P LP ea OEM# LP03361T 1.40 ea Teflon Apollo LP03362 Centurion LP03361 Centurion Indy LP03361 Cobra (All) LP03362 Colt SS (All) LP03362 Custom II (All) 1974 LP03362 Cutlass/SS (All) LP03362 Electra (All) LP03362 Galaxy (All) LP03362 Gemini (All) LP03362 Spider Guide Buttons for Polaris Drive Clutches LP03361 FITS ALL 1995 MODELS EXCEPT SUPER SPORT Replacement spider guide buttons for Polaris es Sold each - 6 per required Indy Classic (All) LP03361 Indy X-Country 1983 LP03361 Indy RXL LP03361 Indy Sport (All) LP03361 Indy SuperTrak LP03361 Indy Trail (All) LP03361 Indy WideTrak LP03361 Indy XC 1991 LP03361 Indy XCR LP03361 Indy XLT (All) LP03361 Indy 400 (All) LP03361 Indy 440 (All) LP03361 CLUTCH 373 SKIDOO continued YEAR OEM # NYLON TEFLON MX Z 800 HO RENEGADE & RENEGADE X KX Ea KX03152T 1.75 MX Z 800 REV KX Ea KX03152T 1.75 MX Z BLAIR MORGAN SPECIAL EDITION KX Ea KX03152T 1.75 MX Z BLIZZARD 800 HO PTEK KX Ea KX03152T 1.75 MX Z RENEGADE 800 HO PTEK KX Ea KX03152T 1.75 MX Z RENEGADE X 800 HO PTEK KX Ea KX03152T 1.75 MX Z 800 HO PTEK ADRENALINE KX Ea KX03152T 1.75 MX Z 800 R ADRENALINE KX Ea KX03152T 1.75 MX Z 800 R XP ADRENALINE KX Ea KX03152T 1.75 MX Z 1000 SDI RENEGADE RT KX Ea KX03152T 1.75 MX Z 1000 SDI RENEGADE X KX Ea KX03152T 1.75 MX Z X KX Ea KX03152T 1.75 MX Z X 440 LC KX Ea KX03152T 1.75 MX Z X 440 RACING KX Ea KX03152T 1.75 MX Z 440 X RACING KX Ea KX03152T 1.75 MX Z X 800 HO PTEK KX Ea KX03152T 1.75 MX Z 800 R RENEGADE & X KX Ea KX03152T 1.75 MX Z XRS 800 HO PTEK KX Ea KX03152T 1.75 MX Z TNT 500 SS KX Ea KX03152T 1.75 MX Z TNT 600 HO E-TEC KX Ea KX03152T 1.75 MX Z TRAIL 500 SS KX Ea KX03152T 1.75 MX Z X 600 HO SDI KX Ea KX03152T 1.75 MX Z X 800 R KX Ea KX03152T 1.75 MX Z X 800 R XP KX Ea KX03152T 1.75 RANGER V KX Ea KX03152T 1.75 SKANDIC KX Ea KX03152T 1.75 SKANDIC SWT V KX Ea KX03152T 1.75 SKANDIC TUNDRA LT V KX Ea KX03152T 1.75 SUMMIT KX Ea KX03152T 1.75 SUMMIT 500 SS EVEREST KX Ea KX03152T 1.75 SUMMIT 600 HO/700/800 HO KX Ea KX03152T 1.75 SUMMIT 600/700/ KX Ea KX03152T 1.75 SUMMIT 600 HO SDI ADRENALINE KX Ea KX03152T 1.75 SUMMIT 800 HO KX Ea KX03152T 1.75 SUMMIT 800 HO ADRENALINE & X KX Ea KX03152T 1.75 SUMMIT 800 R ADRENALINE KX Ea KX03152T 1.75 SUMMIT 800 R EVEREST KX Ea KX03152T 1.75 SUMMIT 800 R XP 50TH ANNIVERSERY KX Ea KX03152T 1.75 SUMMIT 800 R XP HILLCLIMB KX Ea KX03152T 1.75 SUMMIT 1000 SDI HIGHMARK & HIGHMARK X KX Ea KX03152T 1.75 SUMMIT X KX Ea KX03152T 1.75 SUMMIT X 600 HO KX Ea KX03152T 1.75 SUMMIT X 800 R KX Ea KX03152T 1.75 SUMMIT X 800 HO KX Ea KX03152T 1.75 SUMMIT XRS KX Ea KX03152T 1.75 Moto Ski/Ski Doo Clutch Slide Kit Fits Ski Doo models. Moto Ski Futura Replaces Bombardier # Special heat treated Teflon coated kit includes four pieces. LP Indy 500 (All) LP03361 Indy 600 (All) LP03361 Indy 650 (All) LP03361 LongTrak (All) LP03361 SS LP03362 SS LP03361 Sport 1983 LP03362 Sprint LP03361 Star LP03362 Star LP03361 StarTrak LP03361 Starfire (All) 1976 LP03361 LP ea OEM# ALL MODELS TC (All) LP03362 TX (All) LP03362 TX (All) LP03361 TX Starfire (All) 1973 LP03362 TX Starfire (All) 1976 LP03361 TC-C LP03361 TX-L LP03361 TX-L Indy LP

11 374 CLUTCH SLP Clutch Press Tools SP20200 PART NUMBERS IN MAGENTA ARE NEW SP20128 Arctic Cat Drive/Driven Clutches SP20200** Polaris Drive/Driven Clutches (Including ATV and P2 Clutches) SP Ski-Doo Driven Clutches (Except RER Models) SP20128* Yamaha Drive/Driven Clutches SP * Not for models with electronic reverse (RER) use SP20134 see below ** For use with Arctic Cat 3 or 4 es SP20134 SLP Clutch Press Tools have been widely accepted as the most efficient compression tool available. This revolutionary and n servicing tool is designed specifically for compressing and holding springs for ease of assembly and disassembly. These are specified in many factory repair manuals as a required specialty tool for compression. Wrestling with the or need for a second person to help is now history. Made compact, the SLP tool can be used for field testing or production repair on the shop bench. High quality metal construction with powder coated finish and UHMW plastic wear patches and fingers provides a quality, functional tool that is extremely durable. Part #SP20200 is a new design that allows disassembly and assembly of all Rapid Reaction Secondary Clutches without any adapters. Designed to service both Arctic Cat and Yamaha n es. SLP spider button removal tool with belt to sheave clearance gauge for polaris Remove spider buttons quickly and easily without damage with this tool from SLP. Simply slide tool onto button and lift to remove. This tool also has a precision gauge to measure belt to sheave clearance for both and belt widths. Improper belt to sheave clearance will cause poor performance. SLP Clutch Holding tool This premium tool offers the proper method to hold the from rotating while removing or torquing the center bolt. Unlike other holding that are laser cut, this tool will not hardmark or damage the, making it a far more superior tool. It also features a cushion grip for comfort. This tool is a must for quick and easy removal. 374 SP SP20202 Arctic Cat/Polaris/Yamaha 31.95

12 PART NUMBERS IN MAGENTA ARE NEW SLP Clutch Sheave Clamp Tool Spider Tool for Polaris CLUTCH 375 The sheave clamp tool holds the sheave in place when collapsed for changing weights without removing outer cover or from crankshaft. An absolute must for field tuning. Sold each. The best and simplest tool for removing pin and roller from Polaris spider. Self aligns, removes, aligns new, including shims and instals new pin. No vise needed. SP20165 Arctic Cat 8.25 SP2086 Polaris Snowmobiles 7.95 SP20161 For Polaris ATV and Yamaha Snowmobiles 8.25 Tension Adjustment Scale Finally! An easy method of measuring and setting tension. This new scale has a range of 0 to 25 pounds. It is very accurate and has a tattle tale marker to help measure more precisely. It can be used in many areas on a snowmobile that call for a specific tension such as secondary breakaway tension, track tension, water pump belt tension, etc. A must for any performance minded tuner. SP SP SLP spider Tool for arctic Cat and Polaris Clutch Made of a high quality steel to precise specifications for ease of use and durability. SP2075 Arctic Cat 6 and 9 Tower Clutch and ALL Polaris SP20198 Arctic Cat 4 Weight Clutch SLP Clutch Holding Fixture for POLARIS Clutches Bolt to bench or hold in a vise for solid holding of for spider removal, to shim belt, to check sheave clearance or to service spider. Fits all Polaris snowmobile and ATV es. Contacts all webs for maximum support to eliminate web damage Center hold down for much greater holding stability while applying off center torque Quick spin down thumb nut Adjustable center post Single person operation even on the most difficult spiders SLP Clutch Holding Fixture for arctic Cat Clutches Bolt to bench or hold in a vise for solid holding of for spider removal, to shim belt, to check sheave clearance or to service spider. Fits Arctic Cat snowmobile es. Contacts all webs for maximum support to eliminate web damage Center hold down for much greater holding stability while applying off center torque Quick spin down thumb nut Adjustable center post Single person operation even on the most difficult spiders SP SP F8/M8/F

13 376 CLUTCH PART NUMBERS IN MAGENTA ARE NEW sno-stuff holding Tools Arctic Cat/comet/polaris holder (30mm) Sno-Stuff has an Arctic Cat style primary holder for Arctic Cat, Comet, and Polaris to their product line. This tool is used to hold the stationary sheave while assembling or disassembling the and may be bench mounted or clamped in a vise. A must-have item to go with our jam nut and spider. This model has a 30mm tapered shaft to be used on these es- Arctco 102C and 108C, Arctic Cat 9 tower and new 6 tower (ex. 800/900 twin), Comet 100C, 101C, 102C, 108C, and 108EXP, and Polaris P85 and P90. Arctic Cat # , arctic cat holder (33mm) The Sno-Stuff Arctic Cat primary holder is used to hold the stationary sheave while assembling or disassembling the and may be bench mounted or clamped in a vise. A must-have item to go with our jam nut and spider. This model has a 33mm tapered shaft to be used on es from 2002 and later models with 800 or 900 twin s and 2003 and later models with 600,700,800 or 1000 laydown twin s. Arctic Cat arctic cat/comet/polaris holding tool Sno-Stuff s holding tool is designed to hold Arctic Cat Comet, 9 tower, new 6 tower, Comet 100C, 101C, 102C, 108C, and 108EXP and Polaris P85 and P90 primary es in place during installation and removal. The tool includes our exclusive PVC handle which reduces scratches and marring to your sled and hands. The tool has a yellow zinc finish and has a precision laser cut construction for high quality. Arctic Cat # ski doo Clutch Holding Tool Sno-Stuff s holding tool is designed to hold Ski- Doo TRA primary es in place during installation and removal. The tool includes our exclusive PVC handle which reduces scratches and marring to your sled and hands. The tool has a yellow zinc finish and has a precision laser cut construction for high quality. OEM# Arctic Cat, Polaris, Comet Ski Doo yamaha Holding Tool Sno-Stuff s holding tool is designed to hold Yamaha YPZ, YXR, and YVXC primary es in place during installation and removal. The tool includes our exclusive PVC handle which reduces scratches and marring to your sled and hands. The tool has a yellow zinc finish and has a precision laser cut construction for high quality. OEM#YS Yamaha sno-stuff compression Tools arctic cat Drive compressor tool Sno-Stuff s Drive Clutch Compression tool is used on all Arctic Round Shaft Drive Clutches to compress and hold the moveable sheave to replace cam arms without removing the from the. OEM# polaris/comet/ac comet compressor tool The Sno-Stuff Drive Clutch Compressor Tool is used on Standard Polaris (P85 and P90), Arctic Cat Comet, Comet 102C, 108C, and 108EXP es to compress and hold the moveable sheave to replace weights, pins, clean and lube your primary without removing the from the. Arctic Cat # , Polaris # , yamaha Drive compressor tool This tool is a must for anyone who does tuning! This tool will allow you to quickly and easily remove weights and rollers without having to first remove the primary cover. This will save time and unwanted wear and tear on the bushing. The tool compresses the quickly and with ease while the locking bracket holds it during service

14 PART NUMBERS IN MAGENTA ARE NEW spider tool for arctic cat/comet/polaris Sno-Stuff offers an Arctic Cat style Clutch Spider Tool for Arctic Cat, Comet, and Polaris. It features a long bar for additional leverage when removing the spider. The bar detaches easily, enabling a 1/2 torque wrench to be used when retorqing the spider. This tool may be used on these es: Arctco 102C and 108C, Arctic Cat 9 tower and new 6 tower, Comet 100C, 101C, 102C, 108C, and 108EXP, and Polaris P85 and P90. Arctic Cat # , , , , and sno-stuff Tools CLUTCH 377 spider tool for polaris/comet/arctic cat Sno-Stuff offers a Polaris/Comet style Clutch Spider Tool for Polaris, Comet, and Arctic Cat. This socket type tool has 3/4 square for spider removal and installation on these es - Polaris P85 and P90, Comet 100C, 101C, 102C, 108C, and 108EXP, and Arctco 102C and 108C, Arctic Cat 9 tower and new 6 tower. Polaris # , Comet #208346A, A spider jam nut tool for arctic cat Sno-Stuff offers an Arctic Cat Clutch Spider Jam Nut Tool. This special thin wall socket type tool, with a 1/2 square to accept common breaker bars and torque wrenches, is required to service 1994-current Arctic Cat 9 tower and new style 6 tower primary es. OEM# spider jam nut tool for polaris 1/2 DRIVE Sno-Stuff offers a Polaris Clutch Spider Jam Nut Tool. This 3/4 square socket type tool is required to service P85 and P90 primary es used on 1972-current snowmobiles and current ATV s. OEM# Jam Nut Tool n puller for arctic cat Sno-Stuff has an Arctic Cat Driven Clutch Puller to their line of. This puller is a universal design that will work on all 1981 and newer reverse cam secondary es with button or roller covers. OEM# , spider tool for polaris Sno-Stuff has added a Spider Tool for Polaris Clutches to their product line. This is the best tool for removing pins and rollers from Polaris Clutch Spiders. Self aligns. Use it to remove old and align new, including shims and installing new pins. Comes with directions Clutch Button fork for ski doo AE Set of 3 These Clutch Button Fork Tools hold the spring-loaded buttons in place when servicing Ski-Doo TRA Drive Clutches. Yellow zinc plated steel, sold in sets of three. OEM #

15 378 CLUTCH PART NUMBERS IN MAGENTA ARE NEW Clutch Offset Aligning Tools RR28496 RR28497 RR28496 Yamaha YPZ Clutches RR28497 Artco Primary, RR28498 Polaris Offset Tool P A/C Comet Primary & Secondary Offset Tool SkiDoo F2000, S2000, ZX Offset Tool SkiDoo CK-3 Chassis Offset Tool SkiDoo F2000, S2000, ZX RR28507 Offset Tool SkiDoo CK-3 Chassis RR28508 Offset Tool SkiDoo ZX with RER (not pictured) RR RR28507 arctic cat aligning tool Arctic Cat with stock reverse, cam n Ultimate Clutch Alignment Tool This tool is CNC machined from billet aluminum. Line up your es center to center and offset with no measuring. You don t need to remove your primary, just remove your secondary (leave your shims on with factory motor mounts or remove your shims if you use solid motor mounts), loosen the mount bolts, slide the tool over your jackshaft and set the arc down onto your primary shaft. Next, line up the three posts on the tool flush with the backside of your fixed sleeve. The tool stays on your while you torque down your motor mounts, resulting in a perfect offset. POLARIS All Generation II CT arctic cat diamond n adjustment tool spring tool Compresses your Ski Doo TRA when servicing the. Clutch Service Tool Fits all n es including splined. Also will work on many es. Baked on powder coat finish. CP Clutch Service Tool CP Adapter for TRA Clutch RR AE alignment and holding A must for proper to converter alignment and offset spacing. Anodized Gloss Purple Arctic Cat Clutch Alignment Tool MB10367 Arctic Cat Clutch Holding Tool MB10370 Ski Doo Clutch Holding Tool MB10800 Polaris Clutch Alignment Tool MB10729 Yamaha Clutch Holding Tool MB

16 PART NUMBERS IN MAGENTA ARE NEW service tool This tool is designed to allow you to disassemble, or assemble the or n es of snowmobiles, ATVs, and golf carts. Our CST comes with a keyed post, a pressure ring, and mounting holes. It comes in a 5 1/4 x 5 1/2 x 27 1/2 box CLUTCH 379 RAMP GRINDING BLOCK Clutch Compression Tool Block holds three flyweights so they can be ground evenly. Used for Comet, Polaris and Arctic Cat fly weights. MB CCT Allows one person to compress es for service work, remove and install helices, change springs and maintenance. ATV Fitment: Yamaha, Arctic Cat, and Suzuki Secondary es. Polaris, Kawasaki, and Comet Primary es. Kawasaki 360 & 650, 700 Prairie & 700 V-Force Secondary es. Snowmobile Fitment: Polaris, Arctic Cat, Yamaha and Comet Primary es. Ski Doo RER Secondary es Mounting Bolt comet tapered half grunt tool BELT REMOVAL TOOL FOR SKI-DOO SNOWMOBILE Used to open ALL Ski Doo secondary es for belt removal High quality steel tool Stores neatly away Easier to work with than O.E. tool Tapered Half Grunt Tool (213965) Pro 2000 These alignment and center to center distance are the most accurate available - Pro 2000 locate on machined surfaces on the jackshaft and crankshaft for exact distance and parallelism. Both es must be removed. The round pointer relies on thread size in the crankshaft which can be decided by the bolt that holds your on. The alignment and distance bar slides over the jackshaft and is held in place with an allen screw. Some pieces will fit more than one manufacturer. Engine Crankshaft pointer TT mm 1.50 pitch Fits most Ski Doo Comet Clutch Lube Spray Clutch Tuning Handbook (UPDATED 2004) This popular Clutch Tuning Handbook has now been rewritten and updated for the third time. This handy book gives you the straight scoop on setting up your es for maximum performance. Special chapters on theory, testing and flywheel grinding. If you're confused about how your works, this book will save you valuable time and money. New sections include Comet, John Deere and Yamaha es. CTH Power Madd Belt & Clutch Cleaner 94C, 102C and 108C Greatly Extends Belt Life Comet Dry spray lube is good stuff for & torque converters. This is a high range, heat resistant lube with the ability to withstand 100,000 PSI. Normal use will extend the life of your equipment oz. can and Performance The only original equipment belt manufacturer recommended cleaner to use on today s higher performance automotive, snowmobile, motorcycle and other motorized vehicle belts. This cleaner safely removes belt impurities while leaving behind no film, oils or residue. PD oz. 379

17 CLUTCH CLUTCH PULLERS ARCTIC CAT YEAR Thread Size USA IMPORT All Arctic Cat w/hex Shaft /16 x All Models w/comet Clutch & Exposed Mounting Bolt thru 95 3/4 x All Models w/ Comet Clutch and Recessed Mounting Bolt thru 95 7/8 x All Models w/ 9 Bolt Artco Clutch /16 x F1000, Jag 1000, All Models with 4 cam arms & 14mm Threads 07 14mm COMET YEAR thread size USA IMPORT All Duster Models Except below all & all C duster , , , complete puller all C duster , , , puller rod (must use mounting bolt that came with all All 102C,108EXP w/exposed Mounting Bolt up to 95 3/4 x , , complete puller all All 108EXP & PRO which include A,107,204,207,503,504,507,600,604,607 all 5/8 x CAUTION Customer must make sure that the puller being used is for these es with a 5/8 x 18to prevent damage to the and or puller CAUTION the is not to be use to pull a Comet of a Polaris with that uses a 7/16 bolt to hold the on All 108EXP and Pro Model # s A,101,102,103,105,106,200,205,500,501, 502,505,506,605, all 9/16 x CAUTION Some 108EXP & 1084-PRO were not tapped deep enough, and must be tapped deeper. Make sure the puller hits the bottom of the crank before putting pressure on the puller All Polaris with Comet Clutch and 5/8-18 thread using a 7/16 mounting bolt all 5/8 x CAUTION should not be used to pull a Comet off a Polaris sled KAWASAKI YEAR thread size USA IMPORT All Models w/ Hex shaft all 9/16 x All Kawasaki Built Clutches MOTO SKI YEAR thread size USA IMPORT Mirage mm x Mirage III POLARIS YEAR thread size USA IMPORT All Models w/ 5/8 External Thread 71-earlier 5/8 x All Models using P85-P-90 Clutch (Except U.S. Built Twins) /4 x U.S. Built Twins (Except Edge) mm x All Fuji Motors Exc. XCR 700/ /4 x U.S. Built Twins Including XC Edge, /4 x /800 XCR All Models Using Comet Clutch w/a 5/8-18 Thread using a 7/16 Mounting Bolt all 5/8 x RUPP YEAR thread size USA IMPORT All Models w/ Hex Shaft /16 x SKI DOO YEAR Thread Size USA IMPORT All Square Shaft /8 x Most Models with TRA mm x (Except 583) Alpine II mm x Cheyenne mm x Escapade mm x Formula 93 14mm x Formula Deluxe 380 F/C mm x FORMULA DLX 600, 700 GS/GSE 01 14mm x Formula Deluxe mm x Formula 500/583/DLX 90, mm x Formula III 600/700 GS/GSE mm x Formula III mm x Formula MX mm x Formula Plus mm x Formula SL mm x Formula SS mm x Formula Z 500/ mm x Formula Z mm x Formula Z mm x Grand Touring 470/500/ mm x Grand Touring mm x Grand Touring mm x Grand Touring mm x Grand Touring SE 670/ mm x Grand Touring 700 GS mm x Grand Touring 800 SE mm x GSX 380/550 FAN 05 14mm x GTX 380/550 FAN 05 14mm x PART NUMBERS IN MAGENTA ARE NEW SKI DOO continued YEAR Thread Size USA IMPORT Legend 500/600/700 GS/ Sport mm x Legend SE 600/ mm x Mach mm x Mach mm x Mach Z mm x MX Z 380 F/C 01 14mm x MX Z 380 FAN mm x MX Z 440 F/C mm x MX Z X mm x MX Z 440 X mm x MX Z 500/ mm x MX Z 500 FAN mm x MX Z 583 FAN mm x MX Z 500/ mm x MX Z X mm x MX Z mm x MX Z 670 H.O mm x MX Z 700/ mm x MX ZX mm x MX ZX mm x MX ZX 700/ mm x MX Z 800 SPORT 03 14mm x MX Z 800 X 03 14mm x MX Z REV 600/ mm x Safari mm x Safari Cheyenne mm x Skandic mm x Skandic 440 F/C mm x SKANDIC 500 FAN mm x SKANDIC 550 FAN / SUV / WT / SWT mm x Skandic 500 SWT mm x Skandic 500 WT mm x SKANDIC WT/SWT FAN mm x Skandic 600 WT L/C mm x Skandic 600 WT L/C mm x Stratos/Voyageur mm x Summit 470/500/ mm x Summit mm x Summit mm x Summit 700/ mm x Touring LE/SLE mm x Tundra/II/LT mm x Voyageur 89 14mm x YAMAHA YEAR Thread Size USA IMPORT All free air s (except GPX w/spliced crank) all All YPZ / YXR es mm x Bravo mm x CS 340 EC 99 18mm x EC340E Enticer Enticer mm x Enticer mm x ET 340C,D,F / ET 340EC,ED,TF EX 440/C/E Excel III Excel V 85-86/88 18mm x Exciter mm x Mountain Max mm x Ovation 89-90/ mm x Phazer 84-86/ 93-95/ mm x S 440E SR 540D SR-V 85-86/ mm x SRX LP SRX mm x SRX mm x SRX mm x SS SS mm x SX 700 / SX 600 / SX mm x Venture mm x Venture mm x Venture mm x Venture mm x Venture GT mm x Venture XL 92-94/ mm x Viking 88-91/ 93-96/98 18mm x V-Max 85 18mm x V-Max 92 18mm x V-Max 500/600/700/DLX mm x V-Max SXR 600/ mm x V-Max with Comet Clutch all LP

18 PART NUMBERS IN MAGENTA ARE NEW COMET PRO Go for the gold with Comet s Pro Added fourth load-bearing member increases roller and button life These race es are for high-performance applications ONLY Clutch uses four weights to greatly enhance tunability To determine arm, add weight of three arms used in 108 EXP, add 14%, then divide by four; this will be the new arm weight to use Arms can be used in sets of two to better zero-in on desired weight Uses same springs as 102-C and 108 EXP es Captivated tower allows shouldered cover bolts to virtually eliminate tower spreading Each features a new bushing in the movable face and redesigned fixed face for increased durability IMPORTANT NOTE: These es are for racing use only. For calibration, contact a high performance specialist or Comet Industries. CLUTCH 381 NEW PRO WITH OEM GEAR BOSSES For Electric Start Arctic Cat 30mm 1:10 tapered flush bore Polaris 30mm 1:10 tapered bore Ski Doo 30mm 1:7.50 tapered bore Arctic Cat 33mm 1:10 tapered flush bore Yamaha 30mm 1:10 tapered flush bore COMET 108 EXP Designed for more power, more endurance, more of everything you need for speed Tried, tested and built to handle high-horsepower s Consistently smooth shifting even after hours of use Wider rollers for increased bearing area (33% more) 1977 and newer 108-EXP es include special recessed mounting bolt with special pilot washer Each features a bushing in the movable face and redesigned fixed face for increased durability Uncalibrated es are sold without cam arms and spring NOTE: 108-EXP es use the same cam arms and spring as the 108-C 108 EXP 2005 with OEM Gear Bosses For Electric Start Arctic Cat 30mm 1:10 taper flush bore 1-3/ Polaris 30mm 1:10 taper / Ski Doo 30mm 1:7.5 taper / Arctic Cat 33mm 1:10 tapered flush bore N/A Yamaha 30mm 1:10 tapered flush bore N/A Ski Doo 30mm 1:10 taper N/A COMET 102-C 102-C es are available for 1-3/16, 1-1/4, & 1-5/16 belt widths See Comet s 108-EXP es for 1-3/8 belt widths and additional 1-1/4 widths Lightweight, strong, & reliable Especially suited for high-performance use Completely adjustable for any snowmobile s power curve - simply change cam arms and spring Seven models are pre-calibrated for the majority of applications Uncalibrated models also available for custom tuning - must purchase cam arms and spring separately Two-piece roller design matches 1985 production NOTE: A flush bore depth indicates the taper begins exactly at the inner edge of the fixed face casting. Positive (+) numbers indicate the taper starts the specified distance into the casting, while negative (-) numbers indicate the taper begins in an extension out of the fixed face casting. CAT. # BORE DEPTH BELT WIDTH CAM ARMS SPRING/COLOR mm tapered - flush 1-1/4 Not Included Not Included

19 382 CLUTCH Pro Cross Reference PART NUMBERS IN MAGENTA ARE NEW 382 CLUTCH PART NUMBER Comet Clutch Lube Spray oz can OLD NEW reference part # DESCRIPTION 1 Clutch Retaining Bolt See Note* Lock Washer-CLU RTN BLT N/A N/A N/A N/A 3 Pilot Washer-CLU RTN BLT See Note** Cover Plate Retaining Bolt Snap Ring See Kit See Kit See Kit See Kit 6 CVR PLT & Up Guide BSH ASS Y Engagement Spring CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE 8 Spider Roller W/BSH Insert See Kit See Kit See Kit See Kit 10 Thrust Washer See Kit See Kit See Kit See Kit 11 Polished Axle Pin-Roller See Kit See Kit See Kit See Kit 12 Flat Guide Button See Kit See Kit See Kit See Kit 13 Spacer for Spider LWR GUI BSH-M/F N/A N/A N/A N/A 14 LWR GUI BSH-M/F See Kit See Kit See Kit See Kit 15 Belt Spacer Movable Face Casting N/A N/A N/A N/A 17 Pilot Bolt-Cam Arm See Kit See Kit See Kit See Kit 18 Steel Washer-Cam Arm See Kit See Kit See Kit See Kit 19 Cam Arm CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE 20 Lock Nut-Pivot Bolt See Kit See Kit See Kit See Kit 21 F/F& Stem Assembly BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH reference part # DESCRIPTION ARCTIC CAT POLARIS SKI DOO ARCTIC CAT YAMAHA 1 Retaining Bolt Pilot Washer & Cover Plate Bolt N/A N/A N/A N/A 5 Snap Ring See Kit See Kit See Kit See Kit See Kit 6 Cover Plate w/bush Engagement Spring CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE 8 Spider Roller W/BSH Insert See Kit See Kit See Kit See Kit See Kit 10 Thrust Washer See Kit See Kit See Kit See Kit See Kit 11 Pin-Roller See Kit See Kit See Kit See Kit See Kit 12 Guide Button See Kit See Kit See Kit See Kit See Kit 13 Spacer for Spider LWR GUI BSH-M/F See Kit See Kit See Kit See Kit See Kit 15 Belt Spacer Movable Face N/A N/A N/A N/A N/A 17 Cam Arm Bolt See Kit See Kit See Kit See Kit See Kit 18 Cam Arm Washer N/A N/A N/A N/A N/A 19 Cam Arm CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE 20 Lock Nut-Pivot Bolt See Kit See Kit See Kit See Kit See Kit 21 F/F& Stem Assembly N/A N/A N/A N/A N/A BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH 0 Flush Flush 0 Flush 30mm 1:10 30mm 1:10 30mm mm 1:10 30mm 1:10 * /2-20 X 6-1/2 ** /2-20 Pilot Wsh. ** MM Pilot Wsh. COMET PRO CAM ARMS grams grams SPIDER PARTS KIT Includes: Item # s PIVOT BOLT KIT (SET 4) Includes: Item # s MOVEABLE FACE BEARING KIT Includes: Item # s 5 & 14 (97-99 models only) SOLD EACH When ordering cam arms for the Comet PRO look up the recommended arms for 108 EXP. Add up the total weight of the 3 cam arms for 108 EXP and divide by 4 to get proper weights for the PRO.

20 PART NUMBERS IN MAGENTA ARE NEW 108 EXP Cross Reference CLUTCH 383 Clutch Part Number SPIDER PARTS KIT Includes: Item # s SPIDER ASSEMBLY KIT Includes: Item # s PIVOT BOLT KIT Includes: Item # s MOVEABLE FACE BEARING KIT includes: Item # s 5 & 14 (97-98 models only) DESCRIPTION reference part # 1 Clutch Mounting Bolt See Note* See Note* Lock Wash. -CLU RTN BLT N/A N/A N/A N/A N/A N/A N/A N/A 3 Pilot Wash. -CLU RTN BLT See Note** See Note** Cover Plate Retaining Bolt Snap Ring See Kit See Kit See Kit See Kit See Kit See Kit See Kit See Kit 6 CVR PLT & Up Guide BSH Engagement Spring CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE 8 Spider Roller W/BSH Insert Thrust Washer Polished Axle Pin-Roller Bouton-guide contour Spacer for Spider LWR GUI BSH-M/F/96-97 N/A N/A N/A N/A N/A N/A N/A N/A 14 LWR GUI BSH-MF/97-98 See Kit See Kit See Kit See Kit See Kit See Kit See Kit See Kit 15 Belt Spacer N/A N/A Movable Face Casting Pilot Bolt-Cam Arm Steel Washer-Cam Arm Cam Arm CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE 20 Lock Nut-Pivot F/F & Stem Assembly F/F & Stern Assembly BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH Mounting Bolt Item# Order# Description * /2-20 x 6-1/2 * M14 x 1.5 x 165MM * /16-20 x 6-1/2 ** /2-20 Pilot Wsh. ** /16 Pilot Wsh. ** mm Pilot Wsh. DESCRIPTION ARCTIC CAT POLARIS SKI DOO ARCTIC CAT YAMAHA SKI DOO 1 Retaining Bolt Pilot Washer & Cover Plate Bolt Snap Ring See Kit See Kit See Kit See Kit See Kit See Kit 6 Cover Plate w/bush Engagement Spring CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE 8 Spider Roller W/BSH Insert Thrust Washer Pin-Roller Guide Button Spacer for Spider LWR GUI BSH-M/F See Kit See Kit See Kit See Kit See Kit See Kit 15 Belt Spacer Movable Face Cam Arm Bolt See Kit See Kit See Kit See Kit See Kit See Kit 18 Cam Arm Washer Cam Arm CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE 20 Lock Nut-Pivot Bolt See Kit See Kit See Kit See Kit See Kit See Kit 21 F/F& Stem Assembly N/A N/A N/A N/A N/A N/A BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH 0 Flush Flush 0 Flush mm 1:10 30mm 1:10 30mm mm 1:10 30mm 1:10 30mm 1:10 Taper Taper Taper Taper Taper Taper Comet Clutch Lube Spray oz can

21 384 CLUTCH 102C Clutch Parts Cross Reference SPIDER PARTS KIT Includes: Item # s SPIDER ASSEMBLY KIT Includes: Item # s PIVOT BOLT KIT Includes: Item # s PART NUMBERS IN MAGENTA ARE NEW CLUTCH PART NUMBER DESCRIPTION reference part # 1 Clutch Retaining Bolt Lock Washer-CLU RTN BLT W/ABV W/ABV Pilot Washer-CLU RTN BLT Cover Plate Retaining Bolt Cvr Plt & Up Guide Bsh Ass y Engagement Spring N/A CAL. GUIDE CAL. GUIDE 8 Spider Roller W/BSH Insert Thrust Washer Polished Axle Pin-Roller Flat Guide Button Spacer for Spider LWR GUI BSH-M/F Belt Spacer N/A N/A N/A N/A N/A N/A N/A 16 Movable Face Casting Pilot Bolt-Cam Arm Steel Washer-Cam Arm Cam Arm CAL. GUIDE CAL. GUIDE 20 Lock Nut-Pivot Bolt F/F& Stem Assembly N/A BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH Comet Clutch Lube Spray oz can /8 x 14 Threaded 3/4 x 16 Threaded 384

22 PART NUMBERS IN MAGENTA ARE NEW Clutch Parts Cross Reference -108c pre EXP SPIDER PARTS KIT Includes: Item # s SPIDER ASSEMBLY KIT Includes: Item # s PIVOT BOLT KIT Includes: Item # s PIVOT BOLT KIT Includes: Item # s CLUTCH c Clutch Part Number Reference Only Description 1 Clutch Retaining Bolt Lock Washer-CLU RTN BLT N/A 3 Pilot Washer-CLU RTN BLT N/A 4 Cover Plate Retaining Bolt CVR PLT & Up Guide BSH Engagement Spring CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE 8 Spider Roller W/BSH Insert Thrust Washer Polished Axle Pin-Roller Bouton-guide contour Spacer for Spider LWR GUI BSH-M/F Belt Spacer N/A N/A Movable Face Casting Pilot Bolt-Cam Arm Steel Washer-Cam Arm Cam Arm CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE CAL. GUIDE 20 Lock Nut-Pivot F/F & Stern Assembly N/A N/A N/A N/A Comet Clutch Lube Spray oz can reference part # BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH 385

23 386 CLUTCH PART NUMBERS IN MAGENTA ARE NEW Spider Roller Kits & Assemblies If spider needs replacing, order: contains complete spider assembly for 102C contains complete spider assembly for 108C Spider Roller Kit Only Up to and including 1988 (Except blue dot spider (1986)**) (108C) Complete Spider Assembly (102C) Complete Spider Assembly **NOTE: 102C manufacturing for 1986 incorporated spider assembly kit This kit is no longer available. These spiders are identified by a blue paint dot next to inner hub. Replace these assemblies with kit * NOTE: Items 1 thru 4 are packaged in quantity shown in the QTY. column. For all four (4) items order CAT. # PART # Description QTY Pin, 3/8" Dia. x 1" long 3* Washer, Thrust 6* Button, Contoured, Guide 6* Roller with Bushing Insert, 3/8" ID 3* If spider needs replacing, order: contains complete spider assembly for 102C contains complete spider assembly for 108C Spider Roller Kit Only (108C) Complete Spider Assembly (102C) Complete Spider Assembly Spider identified by a "WR" embossed on one leg of spider on the bottom side. (Roller Side). * NOTE: Items 1 thru 4 are packaged in quantity shown in the QTY. column. For all four (4) items order # CAT. # Description QTY Pin, 3/8" Dia. x 1" long 3* Washer, Thrust 6* Button, Contoured, Guide 6* Roller w/bushing 3/8" ID 3* 108EXP Clutches For all Clutches Manufactured from 1989 to date WIDER ROLLER IN THIS KIT If spider needs replacing, order: contains complete spider assembly for all 108EXP es Spider Roller Kit Only Complete Spider Kit * NOTE: Items 1 thru 4 are packaged in quantity shown in the QTY. column. ** /16" Wide Roller Kit available for use with heavier arms For all four (4) items order CAT. # PART # Description QTY Pin, 3/8" Dia. x 1-5/8" long Washer, Thrust Button, Flat Guide ** Roller 3 386

24 PART NUMBERS IN MAGENTA ARE NEW 25MM Converter Bushing Adapts 30mm 1:10 tapered bore es to most 25mm 1:10 tapered crankshaft EXCEPT ones having threaded male extension on the end, then use For use with 1/2 mounting bolts used on 102C and 108C es for all applications except Polaris Mounting Bolt Guide Washers for 102 & 108 Clutches Only 108EXP Polaris 7/ Others 1/ For use with 9/16 mounting holes on 102C and 108C es for Polaris applications only CLUTCH 387 Mounting Bolt Kit, 30mm 6-1/2 length x 1/2 fine thread - fits , , , , , , , , , & others Mounting Bolt Kit, Yamaha 7 length x 1/2 MOVEABLE FACE (Includes Bushing) fine thread - fits Yamaha es Cover Assembly Kit These two cover plates are identical except that they have 102C and 108C stamped on them. They feature pressed in bushing for a longer life fits 102C fits 108C Fits 108 EXP Cover Bolt Kit Spacer Contains (6) cover plate retaining bolts (1-3/4 length), lock washers for cover plate bolts Cover Plate Bushing Cover plate bushing for latest Comet es. Can be used only in cover plates with black snap ring (spirelox) visible from the outside To raise the Engagement by approximately 200 RPM, install 1 spacer # above the spring. A maximum of 3 spacers may be installed, raising the top engagement by approximately 600 RPM. Mounting Bolt 5-1/2 x 7/16 fine thread - fits and Includes lock washer C Mounting Bolt 5-1/2 long x 1/2 fine thread EXP Shallow Bores 1/2 x 7-1/4 fine thread EXP Polaris Deep Bore 7/16 x 6-1/4 fine thread EXP Ski Doo 14MM x 160MM. 15MM thread Spider Spacers for 108C/108EXP Hardened for 108C (1-1/2 Post) 2/Pkg for 108 EXP 2/Pkg. Shims Spring Shim Helps raise engagement rate. 1 washer raises engagement 100RPM. Use 1, 2, or 3 washers on 102C/108C/108EXP series es /Pkg. Spacers used in model 100 series es, Replaces original (2 required) for 102C 2/Pkg for 108C (1-1/2" Post) 2/Pkg for 108C (1-5/8" Post) 2/Pkg. Belt Spacer Shims Belt spacer shims allow use of 1-5/16" belt in 102C/108C es C Belt 1/Pkg C (Early) (Belt) 2/Pkg. 387

25 388 CLUTCH Comet 94-C Duster The 'DUSTER' is the best yet for any snowmobile application. When you compare the Comet Duster to any other - even including the 102C - the overall features of the cost, weight, simplicity, ease of maintenance, endurance and performance, no other can compare. For use on s up to 440cc. SIMPLICITY at its finest PERFORMANCE at its best The finest "EVERYDAY known yet for snowmobiles. Costs less than you would ever expect to pay for a good Outperforms es costing twice as much Simple... in construction, to install, to calibrate Doesn't require constant maintenance.. put it on and forget it's there Will last for a long, long time... probably longer than your sled There's a DUSTER for almost every application... regardless of belt top width or crankshaft sizes. PART NUMBERS IN MAGENTA ARE NEW Universal 30mm 1:10 flush tapered bore. Adjusts to belts 1-3/16" thru 1-1/2" wide. Comes with spacer installed for 1-1/4" belt. Contains six pucks and orange spring. Since the majority of snowmobiles, including those with Spirit, Kohler, CCW. JLO, Hirth, Tohatsu, Kawasaki, Sachs, Fuji, etc., usually have a 30mm 1:10 tapered crankshaft, this is the most popular Duster. For models that have other crankshaft designs or specific requirements such as ring gear bosses and oil pump s see other es listed below Universal w/ribbed cover The ribbed cover and matching pucks make this more durable in higher load and higher temperature conditions. Same as the except that it comes with spacer kit installed to accept both 1-3/16" and 1-1/4" belt. Contains (6) pucks and orange spring Rotax (Threaded) 7/8" - 14 threaded 'Rotax' bore. For 1-3/8" wide belts. Contains six pucks and blue spring. Larger, but older Ski Doo snowmobiles require this bore Rotax (Threaded) 3/4" - 16 threaded 'Rotax' bore. For 1-3/16" wide belts. Contains six pucks and pink spring. Older and smaller Ski Doo snowmobiles require this bore size Rotax (Electric Start) 30mm 1:10 tapered bore for 1-5/16" wide belts - contains nine pucks and yellow spring. Fixed face has 6 'bosses' to accept various ring gears of Bombardier electric start systems. Will not fit Citation models Rotax (Electric Start) 30mm 1:10 tapered bore - contains six pucks and orange spring. For Citation with or without electric start Polaris (Deep Bore) 30mm 1:10 tapered 'deep' Polaris bore. For 1-3/8" wide belts. Contains six pucks and orange spring. For Polaris snowmobiles only and later - equipped with Polaris/Fuji s whose crankshaft PTO extends into approximately 2" Yamaha (W/Oil Pump Gear) 30mm flush tapered bore. Contains six activator pucks and red spring. Fits only Yamaha twin cylinder models 1974 to present with oil pump gear attached to fixed face of and a standard 30mm tapered bore. Will not fit older models with splined crankshaft. To pull and 94C Duster Clutch (Except and ) use Clutch Puller. 94C Clutch Parts Cross Reference Puller for and Duster Clutch - use Clutch Puller Activator Puck CLUTCH PART NUMBER NOTE: To adapt this (206094) from a 30mm bore to a 25mm 1:10 taper use adapter bushing # Item 4 includes: #1,2 and 3 reference part # Used as cover puller DESCRIPTION 1 Fixed Face N/A N/A N/A N/A N/A 2 Spacer Kit N/A N/A N/A N/A N/A 3 Stem N/A N/A N/A N/A N/A 4 Fixed Face w/stem N/A N/A N/A Spring Activator Puck Movable Face w/brgs N/A Upper Guide Bushing Smooth Cover N/A A Ribbed Cover N/A N/A N/A N/A N/A N/A 11 Flat Washer N/A Lock Washer N/A N/A Mounting Bolt N/A Puller Bolt Flat Washer MM Adapter N/A N/A N/A N/A N/A 18 Puller Kit, Rod & Bolt N/A N/A Belt Width 1-1/4 1-3/8 1-3/16 1-3/16 1-5/16 1-1/4 1-5/16 1-1/4 1-1/4 Engagements 3100 RPM 3100 RPM 3000 RPM 4000 RPM 4000 RPM 3100 RPM 3100 RPM 3100 RPM 3100 RPM BORE DEPTH BORE DEPTH 3/4 x 16 7/8 x 14 BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH BORE DEPTH 0 Flush Threaded Threaded 0 Flush 0 Flush mm 1:10 30mm 1:10 Rotax Engine Rotax Engine 30mm 1:10 30mm 1:10 30mm 1:10

26 PART NUMBERS IN MAGENTA ARE NEW Duster Activator Pucks Duster Springs CLUTCH FOR USE WITH SMOOTH COVER APPROX. GRAM WEIGHT 15.6/1 Hole 17.3/7/8 Hole 20.0/3/4 Hole 25.5/Solid 44/3/4 Steel Insert 53.5/7/8 Steel Insert 59.6/1 Steel Insert Comet now has available a Ribbed Cover to use in lieu of the original Smooth Cover. This cover is designed for use in high load, or heat conditions to stop rotation of the movable face during high load conditions. In the past, there have been instances of puck melt down in this situation. IMPORTANT! Only the matching ribbed pucks can be used with the ribbed cover. See listing above for cross reference from smooth to ribbed pucks. RPM E N G A G E M E N T CHART Duster Belt Spacer Kits Mounting Bolt Covers - Moveable and Fixed Faces FOR USE WITH RIBBED COVER Use with 94C Duster Numbers , , , and CAT. # COLOR TENSION AT: 2 5/16 1 1/4 Fits: / / / / Green Red Orange Yellow White Silver Fits: / / / Pink (SOLD AND PRICED IN PKG. OF 3) } Blue Red for and Universal Clutches * This kit is pre-installed on all es CAT. # BELT SPACER WIDTH /16 & 1-1/4 Belts* /8 Belts 3/ /16 Belts 1/ /2 Belts 5/16 CAT. # DIA. THREAD LENGTH /2 Fine 5-1/2 Fits most 94C es Moveable face with bushings for , , and es. 1 5/16 O.D. 1 9/16 O.D. * Pounds tension when compressed to height of 2 5/16 and 1 1/4. NOTE: Accepted industry tolerance for compression spring is %. Thus a given 94C Duster calibration may vary somewhat from a like set up shown above. 25mm Converter Bushing To adapt (206094) from 30mm bore to a 25mm 1:10 taper use this adaptor bushing C Cover Bolt Comes with each 94C, but often gets misplaced. It is used with the puller below and also to remove and install cover } 94C Flat Washer For cover puller bolt, it is used when removing and installing covers on 94C es Engagement Theory While many of the engagements above are the same or nearly so, they are obtained via different combinations of spring and initial collective puck mass. Great differences will result however at higher operating speeds. Though 'pounds of compression' at 2-5/16" height may be similar, each spring color has a different compression rate. The stronger a spring is, the greater the peak RPMs it will tend to allow... and centrifugal mass (force of the pucks) must be considered. Of two similar engagements, the one which is obtained with a greater initial collective puck mass will yield the better belt pressure, though it will not turn as high peak RPMs as the other. Use with 94C Duster Numbers , , , and SILVER GREEN ORANGE YELLOW WHITE PINK RED BLACK BLUE QTY C Clutch Puller Tool Kit Fits all duster es (except and ) and includes rod, cover, puller bolt, and washer C Clutch Puller Tool Kit Fits duster es and only and includes rod, cover, puller bolt, and washer. 32MM

27 390 CLUTCH PART NUMBERS IN MAGENTA ARE NEW Bushing Insert Kits Cam bushing service kit includes 3 bushings for cam arms. For 102C and 108C es. Bushing inserts for Comet 102C, 108C, 108EXP, and 108 4PRO es (Pkg. of 3) (Pkg. of 3) Cam Arm Pivot Bolt Kits for EXP es for EXP es (1/4") (1/4") (1/4") (1/4") (5/16") (5/16") Set of 3 specially hardened bolts, nuts and washers for mounting cam arms in 102C/108C es. Designed for s over 70 hp and racing applications. Strengthens the, therefore should be inspected regularly to prevent serious damage. Set of 3 specially hardened bolts, nuts and washers for mounting cam arms in 108 EXP ( ) es. Designed for s over 70 hp and racing applications. Strengthens the, therefore should be inspected regularly to prevent serious damage. Set of 3 specially hardened bolts, nuts and washers for mounting cam arms in 108EXP ( ) es. Designed for s over 70 hp and racing applications. Strengthens the, therefore should be inspected regularly to prevent serious damage (Kit as Shown) (Kit as Shown) (Kit as Shown) Replacement Parts for above kit: (qty) Washers Lock Nuts Replacement Parts for above kit: (qty) Washers Lock Nuts Replacement Parts for above kit: (qty) Lock Nuts cam arm bushings Replaces warn Arctic Cat, Polaris, Lighting or MTX weight bushings to maintain best performance. Reduce weight and Roller wear due to warn bushings. SP FOR 102C PRODUCED BEFORE 1986 Duralon bushing fits all 1022C's and heavy duty 102C's produced before Includes bushing, snap ring and instructions. Identify by date cast into moveable face or by exposed bushing edge of belt side of moveable face Small Service Kit Roller Buttons for Spiders Moveable Face Bushing FOR 102C PRODUCED 1986 OR LATER FOR 108C PRODUCED 1988 OR LATER ALL 108 EXP Fits 1-5/8" Stem Diameter Duralon bushing fits 102C, 108C and 108EXP es and replacement moveable faces produced 1986 or later. Thinner design transfers heat better and is shielded from belt for longer life. Identify by date cast into moveable face or shielding lip in belt side of moveable face FOR 108C PRODUCED IN 1987 ONLY Fits 1-1/2" stem only * NOTE: Button Kit for 1986 es is no longer available. These are identified with a blue dot next to center hub. Replace with kit CAT. # DESCRIPTION Replacement roller kit with insert for roller button kit Nylon button kit (3) cam slider shoes for 90/100 n units. 1/4" hole size Roller Button - Button 9/16" (white) Roller 3/8" x 9/16" OD Pin 1" x 3/8" OD. (Fits early model 102Cs) Steel replacement pins for each (3/8" diameter x 1" long) Guide buttons for roller kit Replacement steel backed fiber washer for roller button kit

28 PART NUMBERS IN MAGENTA ARE NEW 102C /108C and 108EXP Springs Frequently Used CLUTCH 391 Lbs Tension when Rate of Tension Outside compressed to increase per Spring height of: additional inch of COLOR Spring Spring Dia. Height Wire Dia. # of coils 1-1/8" 2-38" Compression Black * $ " 3-1/ Blue ' 4-7/8" / Brown ' 2-7/8' Gold " 3-1/2' Orange " / Pink " Purple ' 4-1/8" Purple * ' 3-15/32' Red * /16" 3-1/4" / Red / Blue - Yam ' 3-1/16' / Silver " 3-15/32" Silver / Black /32' 3-23/64" / Silver / Green - Yam ' 3.638" Silver / Orange - Yam " 3.07' Silver/Red - Yam " White ' 3-3/4" / White * " 3-1/8' Yellow " 4-1/ / Yellow/Green * " 3-13/32' /2 at l-3/16" Yellow/Red /16" 2-29/32" Yellow/White ' 3.0" Actual tensions of springs vary from poundages and rates listed herein which are only COMET spring tension objectives. Certified spring tensions would cause springs to be significantly more expensive. Industry standards for springs permit an initial variance of ± 10%. To "pre-load" these springs for greater initial tension, up to 3 spring shims (part #203849) may be used with most of them. "Bottoming out of a spring coil upon coil even once will hasten its deterioration so avoid using 3 shims if the "bottoming out" condition should result. * : Most popular models of springs used on the market. (listed by Gram Weight) Reference Chart for 102C / 108C/108EXP / PRO Cam Arms gram weight CAT# Code Color Per Arm *** $25.05 Z-2 BLUE A Z YELLOW C-2M * C1-M * A A-27 * A-14 * Z-1 RED A-10 * END BROWN D AA-2 * WHITE A-13 * C-2 * A-6 * A-24 * A-8 * END RED B-3 * A-9 * END BLACK A-3 * RED A-12 * N-1 * HE B-1 * A-19 * A-17 * A-28 * ALL CAM ARMS ARE PRICED & SOLD EACH Comet arms are available for all 102C / 108C / 108 EXP / PRO Torque Converter If you require cam arms for a EXP with a 5/16 pivot bolt, it will be necessary to purchase cam arms listed here and push bushings out. * Arms with an asterisk (*) are supplied from Comet only with special performance bushing, factory pre-installed. Kit # contains 3 replacements of this bushing. *** Actual gram weights of arms vary from weights listed herein which are only Comet arm weight objectives. Certified part weights would cause arms to be significantly more expensive. The variance may occasionally exceed 2 grams per arm and is a result of greater or lesser density, one part to another - a result, in turn, of the sintered metal manufacturing process used in arm construction. gram weight CAT# Code Color Per Arm *** $20.35 A-5 * BLUE A-22 * A-1* ORANGE A-2 * HUB YELLOW T A-1 * A-4 * GOLD A-11 * PURPLE A-20 * A-25 * A-15 * A-16 * A-26 * AC-1 * A-52 * A-18 * A-23* F-2 * A-54 * AC AA-1 * GREEN HE X Q AC R K U U