METRIC SELECTION TABLE. Entry Thread A B Catalog #
|
|
|
- Lawrence Stevens
- 5 years ago
- Views:
Transcription
1 Accessories A Series A Series Lock Nut Standard material is nickel-plated brass METRIC Entry Thread A B Catalog # 3 18 CAP CAP CAP CAP CAP CAP CAP CAP NPT Entry Thread A B Catalog # 1/2" CAP /4" CAP " CAP /4" CAP /2" 5 52 CAP " CAP /2" CAP * For stainless steel replace last digit with 9 A Series Sealing Washer Standard material is neoprene METRIC NPT Metric Size Metric Catalog # Metric Diam. D MetricThickness E NPT Size NPT Catalog # NPT Diam. D NPTThickness E 10 CAP CAP CAP CAP CAP CAP CAP CAP CAP /4" CAP /8" CAP /2" CAP /4" CAP " CAP /4" CAP /2" CAP " CAP /2" CAP " CAP /2" CAP A Series Earth Tag Standard material is nickel-plated brass METRIC Entry Thread A B C D Catalog # CAP CAP CAP CAP CAP CAP CAP CAP NPT Entry Thread A B C D Catalog # 1/2" CAP /4" CAP " CAP /4" CAP /2" CAP " CAP /2" CAP
2 Accessories A Series A Series Serrated Lock Washer Standard material is stainless steel Metric Size External Diameter Catalog # CAP CAP CAP CAP CAP CAP CAP CAP CAP A-Series Shroud Standard material is PVC Gland Size Catalog # 4 CAP CAP CAP CAP CAP CAP CAP CAP CAP CAP CAP CAP CAP A Series Clamping Module Standard materials are nickel-plated brass body with stainless steel screws and washers Cable Range Gland Size Across Flats Width Thickness Catalog # CAP CAP CAP CAP CAP CAP CAP CAP CAP CAP CAP CAP CAP A Series Earthing Washer Standard material is brass METRIC Lead Sheath Sealing Range Gland Size Min Max Cable Diameter Catalog # CAP CAP CAP CAP CAP CAP CAP CAP CAP CAP CAP CAP
3 Accessories A Series A Series Adaptors and Reducers Standard material is nickel-plated brass ATEX Exe Exd with LCIE 98 ATEX Male M12 M110 Female METRIC x METRIC ORDERING EXAMPLE: CAP M12 M80 M Male M12 M110 METRIC x NPT Female 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" Size available no part number Size not available Male 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" NPT x METRIC Female M12 M100 M Male 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" Female 4" * For stainless steel replace last digit with 9 NPT x NPT 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4"
4 Accessories A Series A Series Stopping Plug Standard material is nickel-plated brass; ATEX Exe Exd with LCIE 98 ATEX Metric Size METRIC Metric Catalog # * Across Flats A Hex Thickness B Thread Length E 12 CAP CAP CAP CAP CAP CAP CAP CAP CAP CAP CAP * For stainless steel replace last digit with 9 NPT Size NPT Catalog # * NPT Across Flats A Hex Thickness B Thread Length E 1/4" CAP /8" CAP /2" CAP /4" CAP " CAP /4" CAP /2" CAP " CAP /2" CAP " CAP /2" CAP * For stainless steel replace last digit with 9 A Series Non-Metallic Stopping Plug Standard material is polyamide 6; ATEX certified Ex e II with LCIE 97ATEX6007X Washer and locknut are required for non-threaded holes (not included) see page 42 POLYAMIDE Metric Size Metric Catalog # Across flats A Hex Thickness B Thread length E 12 CAP CAP CAP CAP CAP CAP CAP CAP
5 Accessories B Series B Series Lock Nut Standard material is brass METRIC Metric Entry Thread Catalog # NPT NPT Entry Thread Catalog # M80 M85 M100 BLN/ BLN/ BLN/ BLN/ BLN/ BLN/ BLN/ BLN/ BLN/M80 BLN/M85 BLN/ BLN/M100 1/2" BLN/050NPT 3/4" BLN/075NPT 1" BLN/100NPT 1-1/4" BLN/125NPT 1-1/2" BLN/150NPT 2" BLN/200NPT 2-1/2" BLN/250NPT 3" BLN/300NPT 3-1/2" BLN/350NPT 4" BLN/400NPT B Series Sealing Washer Standard material is nylon METRIC Metric Entry Thread Catalog # NPT NPT Entry Thread Catalog # M80 M85 M100 RNSW/ RNSW/ RNSW/ RNSW/ RNSW/ RNSW/ RNSW/ RNSW/ RNSW/M80 RNSW/M85 RNSW/ RNSW/M100 1/2" RNSW/050NPT 3/4" RNSW/075NPT 1" RNSW/100NPT 1-1/4" RNSW/125NPT 1-1/2" RNSW/150NPT 2" RNSW/200NPT 2-1/2" RNSW/250NPT 3" RNSW/300NPT 3-1/2" RNSW/350NPT 4" RNSW/400NPT B Series Earth Tag Standard material is brass METRIC Metric Entry Thread Catalog # NPT NPT Entry Thread Catalog # M80 M85 M100 B Series Shroud BET/ BET/ BET/ BET/ BET/ BET/ BET/ BET/ BET/M80 BET/M85 BET/ BET/M100 1/2" BET/050NPT 3/4" BET/075NPT 1" BET/100NPT 1-1/4" BET/125NPT 1-1/2" BET/150NPT 2" BET/200NPT 2-1/2" BET/250NPT 3" BET/300NPT 3-1/2" BET/350NPT 4" BET/400NPT PVC Size (Gland Size) Catalog # PCP Size Catalog # L24 (16, 20s) PVC-L24 L24 (16, 20s) PCP-L24 L30 (20) L38 (25) PVC-L30 PVC-L38 L30 (20) L38 (25) PCP-L30 PCP-L38 PVC L46 (32) PVC-L46 L46 (32) PCP-L46 L55 (40) PVC-L55 L55 (40) PCP-L55 L65 (50, 50s) PVC-L65 L65 (50, 50s) PCP-L65 L80 (63, 63s) PVC-L80 L80 (63, 63s) PCP-L80 L90 (75, 75s) L104 (80,85) PVC-L90 PVC-L104 L90 (75, 75s) L104 (80, 85) PCP-L90 PCP-L104 PCP L114 (90, 100) PVC-L114 46
6 Accessories C Series C Series Lock Nut Standard material is brass METRIC Metric Entry Diameter Catalog # 20 LNM1 25 LNM2 32 LNM3 40 LNM4 50 LNM5 63 LNM6 75 LNM7 80 LNM8 NPT NPT Entry Diameter Catalog # 1/2" LNN1 3/4" LNN2 1" LNN3 1-1/4" LNN4 1-1/2" LNN5 2" LNN6 2-1/2" LNN7 3" LNN8 C Series Sealing Washer/Gaskets Standard material is nylon METRIC Metric Entry Diameter Catalog # 20 SGM1 25 SGM2 32 SGM3 40 SGM4 50 SGM5 63 SGM6 75 SGM7 80 SGM8 NPT NPT Entry Diameter Catalog # 1/2" SGN1 3/4" SGN2 1" SGN3 1-1/4" SGN4 1-1/2" SGN5 2" SGN6 2-1/2" SGN7 3" SGN8 C Series Earth Tag Standard material is nickel-plated brass Metric Entry Diameter NPT Entry Thread Catalog # 20 1/2" ET1 25 3/4" ET2 32 1" ET /4" ET /2" ET5 63 2" ET /2" ET7 80 3" ET8 C Series Shroud Standard material is PVC Part Number To Suit Gland SH1 TUA1M10 TUA1M12 TUA1M15 TWA1M TWAX1M SH2 --- TWA1 TWAE1 TWAX1 TWAB1 TWAB1 SH3 --- TWA1 TWAE1 TWAX1 --- SH4 TUA2M TWAX2M SH5 TUA3M23 TWA2M27 TWAE2M27 TWAX2M27 TWAB2M27 SH6 TUA TWAX3M SH7 --- TWA3M34 TWAE3M34 TWAX3M33 TWAB3M34 SH8 TUA5M34 TWA4 TWAE4 TWAX4M38 TWAX5M43 TWAB4 SH9 TUA5M38 TUA5M TWAX5M SH10 TUA6M TWAX5M52 TWAB5M53 SH TWA5M53 TWAE5M53 TWAX6M60 TWAX6M65 TWAB6M66 SH12 TUA6M54 TUA7M60 TWA6M66 TWAE6M66 TWAX7M SH13 TUA7M SH TWA7M78 TWAE7M78 TWAX7M78 TWAB7M78 47
7 Accessories D Series D Series Lock Nut Standard material is polyamide Metric Entry Diameter Width Thickness Catalog # M12 x GHG R0031 x GHG R0032 x GHG R0033 x GHG R0034 x GHG R0035 x GHG R0036 x GHG R0037 x GHG R0038 D Series Reducing Ring Standard material is polyamide Thread 1 Thread 2 Length 1 Length 2 Length 3 Across Flats Catalog # 20 x 1.5 x GHG R x 1.5 x GHG R x 1.5 x GHG R x 1.5 x GHG R x 1.5 x GHG R x 1.5 x GHG R x 1.5 x GHG R x 1.5 x GHG R x 1.5 x GHG R x 1.5 x GHG R0083 D Series Screw Plug Standard material is polyamide Thread 1 Diameter Length 1 Length 2 Catalog # 16 x GHG R x GHG R x GHG R x GHG R x GHG R x GHG R x GHG R0117 D Series Blanking Plug For sealing unused cable glands; Standard material is polyamide Thread 1 Diameter Length 1 Catalog # GHG R GHG R GHG R GHG R GHG R GHG R GHG R GHG R
8 Accessories E Series E Series TSC Epoxy Sealing Compound Std. Carton Qty. Tube Size Catalog # oz TSC oz TSC oz. TSC4 E Series Wire Mesh Grip Cord Range Diameter Gland Nut Wire Mesh Grip Catalog Number.375 to.500 NUT94 RPE to.625 NUT94 RPE to.625 NUT95 RPE to.750 NUT95 RPE to.875 NUT95 RPE to NUT N.875 to NUT N.875 to NUT95 RPE to NUT N to NUT98 RPE to NUT98 RPE to NUT913 RPE to NUT N E Series Cold Shrink Kit Entry Thread Catalog # 1/2" TMC-K1 3/4" TMC-K2 1" TMC-K3 1-1/4" TMC-K4 1-1/2" TMC-K5 2" TMC-K6 2-1/2" TMC-K7 3" TMC-K8 3-1/2" TMC-K9 4" TMC-K10 All dimensions in inches unless otherwise noted Cold Shrink TM Corrosion Protection Kits are specially designed for Cooper Crouse-Hinds TMC, TMCX and TECK fittings to provide protection against corrosive elements like salt spray and moisture. The TMC-K kit is made of a Cold Shrink material that is quick and easy to install on the gland. The Cold Shrink material is made of EPDM rubber that contains no chlorides or sulfurs. The protection kit installs easily over the gland without the use of a heat source to shrink the material tightly over the seal. The Cold Shrink material can be removed easily from the gland by simply cutting it off. See ordering information for complete offering of TMC-K Cold Shrink kits for corrosion protection. Cold Shrink is a registered trademark of the 3M Company. 49
9 Accessories Breathers & Drains Breather Drain SIRA 99 ATEX 3050 U I M2 II, 2GD, EExe I & II (Stainless steel & brass only) II 2GD, EExe II (Nylon only) Enclosure type 4x IP66 Entry Thread Material Catalog # Brass ACDPEB//15 Stainless Steel ACDPES//15 Nylon ACDPEBN//15 Brass ACDPEB//15 Stainless Steel ACDPES//15 Nylon ACDPEBN//15 1/2 Brass ACDPEB/050NPT/15 1/2 Stainless Steel ACDPES/050NPT/15 3/4 Brass ACDPEB/075NPT/15 3/4 Stainless Steel ACDPES/075NPT/15 Drainage Plug Standard material is polyamide; PTB01 ATEX 1128X Ex 1126 Exe II Thread 1 Diameter Length 1 Length 2 Catalog # x GHG R0105 Breathing and Drainage Plug Standard material is glass-filled polyamide; SIRA 99 ATEX 3050 U Ex 1126 Exe II Thread 1 Catalog # x 1.5 GHG R0002 Please refer to our full product catalog for additional breather and drain options 50
Global Cable Gland Solutions
Global Cable Gland Solutions Global Cable Gland Solutions For more than 100 years, companies have come to rely on Cooper Crouse-Hinds for value they can trust to grow their business. Our comprehensive
Global Cable Gland Solutions
Global Cable Solutions Global Cable Solutions For more than 100 years, companies have come to rely on Cooper Crouse-Hinds for value they can trust to grow their business. Our comprehensive offering of
+ + = K = K3. ADE cable gland accessories and kits. Ordering information: ADE external clamping module. ADE-4F and 5F lead sheath washer
E cable gland accessories and kits E external clamping module (available with all E glands) E-4F and 5F lead sheath washer Cable range Size For hexagon Width Thickness 2.8-5.5 5.0 8.0 5.0 CP804 4.0-8.5
ADE 4F. > For armoured cable > IP68. > Compliance. > EX Performance. > Nickel plated brass and stainless steel
ADE 4F 4 F U N C T I O N S : D O U B L E > For armoured cable > IP68 > Compliance > EX 60079-0 2009 Performance > Nickel plated brass and stainless steel > Optional : aluminium and bronze raw material
ADE 6F ADE 6F. page 46
ADE 6F 6 F U N C T I O N S : D O U B L E C L A M P I N G > For armoured cable > IP68 > Compliance > EX 60079-0 2009 Performance > Nickel plated brass standard finishing > Optional : stainless steel, aluminium
Cable and Cord Fittings Hazardous and Non-Hazardous
Cable and Cord Fittings Hazardous and Non-Hazardous 5F Description Page No. Description Page No. Application/Selection 62, 63 Cable/Conduit Sealing Devices Thru-Wall Barrier TW Series 101-106 Link Seal
Amphenol Cable Glands and Cord Grips Amphenol
Amphenol Cable Glands and Cord Grips 12-055-1 Amphenol Table of Contents Page Number Introduction 1 Amphenol Cable Glands 2-3 ATEX Approved Glands Featuring Elastometric Seals EX-20 4-5 EX-25 6-7 EE-30
Appleton s ATX product line includes a wide selection of both Increased Safety and Flameproof cable glands for use with unarmored and armored cable.
ppleton s TX product line includes a wide selection of both Increased Safety and lameproof cable glands for use with unarmored and armored cable. ppleton's TX cable glands are available in a wide range
Capri ADE 6F - for Armoured Cable
Capri ADE 6F - for Armoured Cable Technical Specification Suitable for the following cable types Steel wire armoured cable (SWA) Steel wire braided cable (SWB) Steel tape armoured cable (STA) Braided marine
Pratley Ezee-Fit Box Replacement Gaskets Replacement Gasket for the Pratley Ezee-Fit Box
Pratley Ezee-Fit Box Covers Ex e/n Either standard or polycarbonate (transparent) Supplied complete with stainless steel cheese head screws and rubber gasket ready to fit Pratley Ezee-Fit Box Replacement
Armoured / Un-armoured Cable Gland
Armoured / Un-armoured Application These cable glands are used ; suited to armoured/un-armoured cables used mainly in areas where British Standards apply. particularly suited to Steel Wire Armoured. compliance
ABG Cable Glands Installation Procedure
ABG Cable Glands Installation Procedure ABG Cable Gland Range Baseefa 16ATEX0004X IECEx BAS 16.0011X Installation, Operation and Maintenance Instructions Material: Brass/ Brass with Nickel plated and Stainless
The safety you rely on.
Cable Glands Global Solutions Catalogue The safety you rely on. Cable Glands & Accessories Global Solutions Introducing Crouse-Hinds by Eaton The leader in electrical products for hazardous, industrial
The cover screws and all other external metal parts are made of stainless steel (AISI 316L). International approvals
E X - J U N C T I O N B O X Plastic version for Zone 1,, 1 and The robust junction boxes made of plastic and light alloy are featured by their simple mounting and installation capability and their design.
Cable Glands - American Series - NEC/IEC
Cable Glands - 103 American Series - NEC/IEC 104 Cable Glands Explosion Proof & General Purpose Cable Gland/Connector Type 711 1 2 3 1 Unique Rear Sealing System This arrangement offers IP66, IP67, IP68
Terminal Boxes in Stainless Steel SLS**.T
Features Variant options Stainless steel enclosures Suitable for installation in Zones 0, 1, 2, 21 and 22 Certified Ex e, Ex ia and Ex tb 6 enclosure size options Various terminal and cable gland configurations
ATEX CABLE GLANDS.
www.gruposiccis.com CONTENTS Page BRASS INTRODUCTION... 2 DN SERIES... 3 DNC SERIES... 4 DAS SERIES... 5 DAD SERIES... DALD SERIES... DNR SERIES... DNCR SERIES... 9 DASR SERIES... 10 DADR SERIES... 11
EX CABLE GLANDS FOR HAZARDOUS AREAS ATEX & IECEX. Zones 1, 2, 21 and 22.
EX CABLE GLANDS FOR HAZARDOUS AREAS & IECEX Zones, 2, 2 and 22 CABLE GLANDS EX D/E 4 CABLE GLANDS UNARMOURED EX D IP66 - IP68 5 CABLE GLANDS UNARMOURED EX E IP66 - IP68 5 CABLE GLANDS UNARMOURED EX D/E
Control Equipment. ATHEX bvba Tel: +32 (0) Fax: +32 (0) Alpenroosbaan 2, 2900 Schoten, België
Control Equipment 01616E00 Position switches are used to monitor the position of moving parts of machines and plant. Can be used in safety circuits, as the device satisfies EN 60 947-5-1/DIN VDE 0660 part
JBEP Series Fiberglass Reinforced Polyester Terminal Junction Boxes for Instrumentation Applications Increased Safety. Factory Drilled and Equipped
Enclosures and Junction Boxes Enclosures and Junction Boxes: Hazardous Location Outlet Boxes Applications Instrumentation junction boxes are used to run process or remote information to control room. For
9.6 Sales: Malux Finland Oy, P.O.Box 69, FI Porvoo, Phone , Fax ,
E X - C O N T R O L S T A T I O N S Moulded plastic Version for Zone 1 and Zone 21 Even under the most adverse conditions, CEAG control stations can be used and operated reliably. The enclosures consist
The Ex-Cell-I series is made for instrumentation with easy access central locking system and hinged cover.
E X - T E R M I N A L E N C L O S U R E S Stainless Steel Version for Zone and Zone 2 The enclosure range is an ATEX certified enclosure / termination solution for category 2 (Zone) application with an
UNION-EX Series Cable glands and accessories for applications in potentially explosive atmospheres
UNION-EX Series Cable glands and accessories for applications in potentially explosive atmospheres UNION-EX Series > METAL CABLE GLANDS (by RCN) > REFERENCE STANDARDS EN 61241-0 Electrical apparatus for
Myers Hubs. Standard Finishes: Aluminum: Natural Zinc: Natural Stainless: Natural
Applications: Myers Hubs are used in the termination of electrical circuits through wall of the enclosure Designed for use indoors or outdoors with rigid conduit and IMC Ideal for pharmaceutical, chemical
ADJUSTABLE CABLE GLANDS
ISO CE R TIF IC AT N IO Intertek TM MANAGEMENT SYSTEMS ADJUSTABLE CABLE GLANDS NICKEL PLATED BRASS Modest Torque Produces Huge Armour Clamping Forces APPROVED SANS SANS IP If fitted with Gasket, Inner
Thread conversion products, breather drains and accessories
Redapt certified products for hazardous areas conversion products, breather drains and accessories Global and North American certified for hazardous areas Global Termination Solutions Eaton s Crouse-Hinds
Unused flameproof threads for cable glands have to be closed with certified plugs.
E X - P L U G A N D R E C E P T A C L E 1 A Metallic Design for Zone 1 The explosion-protected light metal plug and receptacle devices can be used in the areas of Zone 1 and Zone 2 at no risk of explosion.
10 Load and Motor Switchgear
10 Load and Motor gear Safety es 01941E00 Safety switches ensure the obligatory isolation of electrical power under condition of equipment cleaning, maintenance and repair. Other methods of isolation,
Having the widest range of cable glands products to meet every kind of requirement for use in marine, Industrial and Non(Industrial)Areas.
Aftec is a leading manufacturer of cable glands,cable Connectors and associated accessories, used extensively for power control, lighting and instrumentation cable application in connection with IEC and
Main current switches >180 A are realized in metal enclosures. Internationally approved.
E X - M A I N C U R R E N T S W I T C H E S 10 A - 80 A (up to 630 A) CEAG main current switches in a number of versions can be protected against inadvertent switching on by our integrated locking facility
Rosemount Product Data Sheet , Rev GA Catalog FIELDBUS PROTOCOL. Hazardous Locations Certifications
Product Data Sheet Rosemount 3051 FIELDBUS PROTOCOL Hazardous Locations Certifications North American Certifications FM Approvals E5 Explosion-Proof for Class I, Division 1, Groups B, C, and D. Dust-Ignition-Proof
Control Stations & Switches: Control Stations Increased Safety Unicode 2 Series: Pre-drilled Control Stations
Unicode 2 Series: Pre-drilled Control Stations Polamide U43W211 Polyester U23W211 Compliance Data: ATEX IEC and IECEx (Polyester): Stainless Steel U62W229 Aluminum U83W211 ATEX IEC / IECEx CE Ex de IIC
I Ex-e/Ex-i terminal box I
ID TAG label & bracket Door document holder opti. Security padlock Hasp opti. Technical data Marking accd. to 94/9/EC II G Ex e II / II D Ex td A1 IP66 Temperature class T6 up to +40 C / T5 up to +55 C
EX-REPAIR AND MAINTENANCE RECEPTACLES
EX-REPAIR AND MAINTENANCE RECEPTACLES A 3 A plugs and receptacles plastic version for zones, 2, 2 and 22 For maintenance, repair and upgrading work, appliances such as drills, welding transformers, hand
A good connection. International approvals.
E X - P L U G S A N D R E C E P T A C L E S 0 A to 25 A plugs and receptacles plastic version for zone, 2, 2 and 22 A good connection Providing electrical energy there, where it is most needed even in
Local Control Station
Local Control Station As per table given below Ex'd', IIC, IP-66, FLP/WP Local Control Station and Switch MFPB/302/IIC-IEC MFPB/302/IIC-IEC MFPB/302/IIC-IEC MFRS/104/I/IIC-IEC MFRS/104/IIC-IEC A B C D
CABLE GLANDS AND CONNECTORS FOR THE IEC & NEC WORLD ATEX 95 & BEYOND ATEX 95 CMP PRODUCTS. Triple Certified
IECEx & ATEX 95 CMP PRODUCTS S AND CONNECTORS FOR THE IEC & NEC WORLD ATEX 95 & BEYOND Triple Certified Single Solution Three Forms of Protection Ex d / Ex e / Ex nr N O O T H E R M A CONTENTS Leading
Cable Glands & Accessories
Cable Glands & Accessories This catalog features ITC s extensive range of liquid-tight, strain relief cord connectors (cable glands) and accessories, including locknuts, sealing washers, plugs, etc. These
It s time to get connected with
It s time to get connected with The essence of quality NEW See pag e6 PRATLEY products and P NUTS are distributed exclusively in the UK by: Cable Connectors Ltd Product Brochure Aluminium Alloy (Corrosion
I Ex-Safety switches I
3-pole, 20 A Technical data Ex-Safety switch 20 A for variable-speed three-phase drives Marking to 94/9/EC II 2 G Ex ed ia IIC T6 / II 2 D Ex td A21 IP66 T80 C EC-Type Examination Certificate PTB 99 ATEX
HTSB system System overview
HTSB system System overview Easy planning of heating circuits Simple installation on site Wide operating temperature range The BARTEC HTSB heating system covers a wide range of applications in trace heating.
ADDIMAX CABLE GLANDS FOR INDUSTRIAL USE [ 2 ]
![ADDIMAX CABLE GLANDS FOR INDUSTRIAL USE [ 2 ]](/thumbs/89/99597369.jpg "ADDIMAX CABLE GLANDS FOR INDUSTRIAL USE [ 2 ]")
CABLE GLANDS FOR INDUSTRIAL USE ADDIMAX CABLE GLANDS www.caledonian-cables.co.uk www.addison-cables.com [ 2 ] CONTENT CABLE GLANDS FOR INDUSTRIAL USE... 2 Single Compression A2 Type Weatherproof & Waterproof
I Ex-control stations I
Type 11 83 Type 11 82 Type 11 81 Technical data Ex-control stations Type 11 81 I Type 11 82 I Type 11 83 Marking accd. to 9/9/EC II 2 G Ex ed ib m IIC T6 II 2 D Ex td A21 IP66 T80 C EC-Type Examination
COUPLINGS. Series Page. Couplings HOSE
COUPLINGS Series Page DRAGON BREATH Steam Female Wing Nut...7610...186 DRAGON BREATH Steam Female Grip Nut...7613...186 DRAGON BREATH Steam Adapters & O-Ring Viton...761...187 Universal Type...7611...188
sira CERTIFICATION KSG, KSGDS and KCG Range of Cable Glands
KSG, KSGDS and KCG Range of Cable Glands This range of cable glands is intended for use with any cable type where sealing and retention is required by gripping the outer sheath (this includes armoured/screened/braided
Installation Accessories
Installation Accessories Elektrostatische Aufladung vermeiden. Nur mit feuchtem Tuch säubern. Evitez lez charges electrotetiques Nettoyer unkjuement avec un chifion humide. Avold electrostatic charge.
Spring loaded resistance thermometer
Spring loaded resistance thermometer THERMOWELL & REPLACEABLE INSERT C200-201-204-205-260-262 CONFIGURATIONS Ex ia RTD Product series PT100RI/WI C200 C201 C204 C205 C260 C262 2 Features assembly The industrial
Section. Cable Glands. sa B-CABLES nv - T 09/ F 09/
Cable Glands Section Prysmian Components offer cable glands for a wide range of requirements from simple industrial applications to hazardous areas, on and offshore. All Industrial Cable glands are designed
Sales: Malux Finland Oy, P.O.Box 69, FI Porvoo, Phone , Fax ,
E X - M A N U A L M O T O R S T A R T E R S Up to A Motors have to be protected against over loads, phase failures and overheating: CEAG's power circuit breaker and manual motor starter features phase-failure
Seismic Sensor Accessories SA, SV & ST 6000 Series
Seismic Sensor Accessories SA, SV & ST 6000 Series Part Number Name Used With Description Housing Material 7295-002 Accelerometer EP Housing SA6200A-X0X; SV6300A-001 Physical protection and access to 1/4-28
1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
EJB Junction Boxes Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4X*,, Ex d IIB + H2 T6, IP66 Explosionproof Dust-Ignitionproof Raintight
As one of the leaders in cable management systems industry, MASEICO maintained the unique success by producing its developed range of cable glands.
Introduction As one of the leaders in cable management systems industry, MASEICO maintained the unique success by producing its developed range of cable glands. MASEICO cable glands were designed and manufactured
Transit Cable Products
Bicon Cable Glands Transit Cable Products 2 Janes Court, Cambridge Cambridgeshire CB1 3JJ United Kingdom Linking the future As the worldwide leader in the cable industry, Prysmian Group believes in the
Accessories Cable glands
Accessories Cable glands 235 Technical data Cable glands Brass hexagon cable gland Brass sealing cable gland Material: Brass, nickel-plated Gasket: Soft rubber Protection type IP 54 Additional information:
110/127 V - 220/240 V BI-PIN HEAVY DUTY LUMINAIRES FOR ARMOURED OR NON-ARMOURED CABLE Fluo 2 x 36 W
/27 V - 2/2 V BI-PIN HEAVY DUTY LUMINAIRES FOR ARMOURED OR NON-ARMOURED CABLE 963 39 Fluo 2 x 8 W 963 37 Fluo W 963 36 Fluo 2 x 8 W 8, 36 and 8 W fluorescent luminaires Ø 26 mm bi-pin tubes, standard G3
I 16A 2-pole up to 50 V I I 16A 3-pole up to 50 V I
I 6A 2-pole up to 50 V I I 6A 3-pole up to 50 V I Flange socket Coupler Technical data Ex-plugs and receptacles for low voltage, 2- and 3-pole acc. to IEC 60309-/2 Marking accd. to 94/9/EC II 2 G Ex de
I Ex-safety switches I
EMERGENCY STOP EMERGENCY STOP Technical data Ex-safety switches 12 A Marking accd. to 94/9/EC II 2 G Ex de IIC T6 / II 2 D Ex td A21 IP66 T80 C EC-Type Examination Certificate PTB 99 ATEX 1164 PTB 00 ATEX
Mechanical features. Spring-loaded elastic terminals: resist vibrations
DXN 20 A 32 A 63 A Explosive atmospheres as standard Compact & robust design Safe & easy operation DXN decontactors are designed for explosive atmospheres, with de protection mode. They comply with the
Aluminum and Steel Liquidtight Strain Relief Cord and Cable Connectors
Application Provide a liquidtight and strain relief termination for flexible type neoprene, hypalon, and PVC jacketed power or control cord and cable. For use in wet or dry locations sealing electrical
TERMINAL BOXES FOR HARSH & HAZARDOUS ENVIRONMENTS
OSUR CL HA ES EN KILLARK Z LO C SJIC SERIES TERMINAL BOXES FOR HARSH & HAZARDOUS ENVIRONMENTS Screw cover style, with or without continuous hinge 3/16 (5mm) wide flat flange for maximum gasket surface
Internationally approved.
E X - M A N U A L M O T O R S T A R T E R S Up to 2 A Motors have to be protected against over loads, phase failures and overheating: CEAG s power circuit breaker and manual motor starter features phase-failure
Limit Switch Type 4747
Limit Switch Type 4747 Ex d flameproof enclosure with inductive or mechanical contacts for linear actuators or rotary actuators acc. to VDI/VDE 3845 General The Type 4747 Limit Switch issues an electrical
Lighting: Fluorescent Lighting RE Series: Recessed Fluorescent Lighting Fixtures, Standard and Emergency Back-Up Increased Safety
4 x 18 W Surface Mounting 2 x 36 W Recessed Compliance Data: ATEX IECEx: ATEX IECEx CE Ex de IIC or Ex demb IIC (emergency version) T6 to T4 Ex td A21 T 75 C Technical Data: 18 W 36 W 58 W 1, 2, 3 & 4
Product manual cable glands type IR and IB. INDEX ELEKTRO BV Harregatplein VP Zuidland Netherlands
Product manual cable glands type IR and IB INDEX ELEKTRO BV Harregatplein 15 3214 VP Zuidland Netherlands T. +31(0)181 452120 http/www.indexelektro.nl email info@indexelektro.nl Purpose of these instructions
ELECTRICAL CONNECTIVITY
ELECTRICAL CONNECTIVITY EXLINK -POLE/-POLE + PE. EXLINK ETHERNET/USB EXLINK -POLE+PE.. MULTI-PURPOSE TERMINAL PLUGS AND RECEPTACLES FOR ZONE 0 A.. PLUGS AND RECEPTACLES FOR ZONE A PLUGS AND RECEPTACLES
Type MR 783 Magnetic level switch
Technical data sheet Magnetic level switch Houdec Instrument SAS Magnetic level switch Technical data sheet Page 0 Technical data sheet Magnetic level switch Operation A float fitted with a magnet slides
GHG43 Series Control Stations
GHG43 Series Control Stations Nonmetallic or 316L Stainless Steel UL/cUL listed Cl. I, Div. 2, Groups A, B, C, D Cl. I, Zones 1 and 2, (A) Ex de IIB + H2 T6 Cl. II, Div. 1, Groups E, F, G (cul) PTB ATEX
1 1/4 NPT FILTER SIZE DESIGNATION PRICE 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS HOLE SIZE DESIGNATION PRICE
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
I Ex-safety switches I
3-pole, 20 A Technical data Ex-safety switches 20 A for controlled three-phase drives Marking accd. to 94/9/EC II 2 G Ex ed ia IIC T6 / II 2 D Ex td A21 IP66 T80 C EC-Type Examination Certificate PTB 99
Junction Boxes & Enclosures JBES and ECES Series: 316L Stainless Steel Enclosures Increased Safety
JBES Series Medium Voltage 11 kv ECES Series Compliance Data: ATEX - IEC: ATEX IEC CE Ex e II Ex ia IIC; Ex ib IIC T6 to T4 Ex td A21 T80 C to T130 C Ex de IIC; Ex demb IIC Operating Temperatures: -50
Enclosure and Panel Solutions. View Industrial Products Brochure
View Industrial Products Brochure 54 55 Cable Glands, Cord Grips, Strain Relief Fittings Nylon Cable Glands Material: Polyamide PA6.6 Temp Range: -20 C to +90 C Sealing Ring: Neoprene 50 sh A Protection
EVZ Series (Small body) Explosion protected luminaire Operating Instructions
EVZ Series (Small body) Explosion protected luminaire Operating Instructions Cooper Crouse-H i n d s Cooper E l ec t ron i c T ec h n ol og i es ( S h a n g h a i ) Co., L t d. No. 955 Shengli Road, East
Direct-acting 3/2 way plunger valve
Direct-acting 3/2 way plunger valve Direct-acting, compact valve with diameter of up to DN 2.5 Vibration-proof, bolted coil system Banjo threaded connection for direct mounting on pneumatic valves Type
60A & 100A IEC 309 Watertight pin & sleeve devices
Technical Data AH560R7W AH560C9W IP69K certified AH560P9W AH560B9W Product Description - North American 60A & 100A; 2-pole, 3-wire grounding; 3-pole, 4-wire grounding; 4-pole, 5-wire grounding Pin & sleeve
1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4*,, Ex d IIB + H2 T, IP Explosionproof Dust-Ignitionproof Raintight Wet Locations Applications:
Metal LIQUID TIGHT CONDUIT FITTINGS & ACCESSORIES for Industrial Application
Metal LIQUID TIGHT CONDUIT FITTINGS & ACCESSORIES for Straight, Male 45, Male 90, Male Straight, Female Straight, Cable Hose, Male Straight Swivel Fittings Ferrules for Fittings Further Accessories Applications
11mm Slot Label S1 = 162, S2 = 170, S3 = 250, S4 = 305, S5 = 330, S6 = 410, S7 = 490, S8 = 570, S9 = 650. Maximum Power Dissipation (Watts) T** T**
Assembly Instructions for: S1 Assembly to S Junction Instructions Boxes for: MS1 to MS Junction Boxes Boxes MS1 to MS Junction Boxes IMPORTANT: This document should be read carefully before commencing
Amphenol Star-line Ex Assembly Instructions (applies to ATEX and IECEx product)
Amphenol Star-line Ex Assembly Instructions (applies to ATEX and IECEx product) L-2120-3 Document Contents: Familiarization & Assembly Information Contact Assembly & Termination Mixing Instructions Potting
EJB Enclosures. ATEX II 2 G Ex d IIB+H2 T6...T3 - II 2 D Ex td A21 T85 C C IECEx Ex d IIB+H2 T6...T3 - Ex td A21 T85 C...
EJB Enclosures ATEX and IECEx Zone 1 certified Explosion proof Marine grade copper-free aluminium IP66 The EJB Series is a range of explosion-proof enclosures, available in either aluminium alloy (EJB)
Technical data. Material e-reinforced polyester in grey or black. Seal Neoprene (CR) round cord (siliconized)
BERNSTEIN Series CP and CPS polyester enclosures are produced from highgrade e-reinforced polyester. Thanks to their reduced surface resistance (Ro < 109 Ohm), the black polyester enclosures meet the requirements
Number Size Gasket A1 Gasket A2 Gasket A3 Gasket A4 Gasket A5 Metric B - C
Techned Ex Cable glands Universal Ex Cable glands Barrier Ex Cable glands Techned TB-PAM Series cable glands Universal single seal cable gland without earth continuity s = inner dimension Number Size A1
Flameproof - Group IIB or IIB + H 2 Carbon steel - DE8BC series. Painted steel. -40 C or -20 C C or +50 C or +60 C
Enclosures Flameproof - Group IIB or IIB + 2 Carbon steel - DE8BC series The flameproof control cabinets DE8BC are designed for the control, automation, distribution boards, motor starters or any other
TCI5125 Dusttight Grip " 1.50"NPT Ins
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 TCI5125 Dusttight Grip 1.20-1.50" 1.50"NPT Ins Eaton Wiring Devices Catalog Number Manufacturer Description Weight per
SEALSAFE PRODUCTS CONDUIT AND CABLE PRODUCTS. for HARSH AND HAZARDOUS ENVIRONMENTS. Certificate ANZEx
SEALSAFE PRODUCTS CONDUIT AND CABLE PRODUCTS for HARSH AND HAZARDOUS ENVIRONMENTS Certificate ANZEx 09.3018 SEALSAFE ZONE 1 HAZARDOUS AREA CONDUIT AND FITTINGS Sealsafe provides a range of nickel plated
Available to use in safe and hazardous areas. Eliminates the risk of damage to heating cables at termination points
Flexotherm offers DETSU terminations for all heat trace heating cables. It has been specifically designed to reduce the risk of damage to heating cables at termination points, thus avoiding the need to
TABLE OF CONTENTS DISCLAMER
PRODUCT CATALOGUE TABLE OF CONTENTS Introduction 2 Series 170 3 Series 178 4 Series 251 5 Series 351 7 Series 363 9 Series 800 10 Series 810 11 Series 820 12 Series 850 13 Series 900 14 Series 950 15
EXBLI & EXBSPI Series. Circuit Breaker Panelboards for Harsh and Hazardous Environments
EXBLI & EXBSPI Series Circuit Breaker Panelboards for Harsh and Hazardous Environments KILLARK Z A H LO C NEMA 4X O Ring Gasket Stainless Steel Tri-Lead Cover New Slide MCB Assembly Handles Padlockable
Linear Luminaire for Fluorescent Lamps Series EXLUX 6401
> As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp
Solutions Ex d IIB+H2, Aluminum and Stainless Steel
Features Assembly examples Enclosures manufactured from copper-free aluminum or AISI 316L stainless steel Suitable for operation in Zones 1, 2, 21 and 22 Certified Ex d IIB+H2 and Ex tb More than 40 enclosure
Enclosures. Section E
Enclosures Section E Enclosures and junction boxes built and configured to meet the requirements of the most demanding hazardous areas and industrial environmental applications across the globe. E Enclosures
60A & 100A IEC 309 Watertight pin & sleeve devices
Technical Data AH560R7W AH560C9W IP69K certified AH560P9W AH560B9W Product Description - North American 60A & 100A; 2-pole, 3-wire grounding; 3-pole, 4-wire grounding; 4-pole, 5-wire grounding Pin & sleeve
With regards to safety it is not necessary to check for correct operation.
- ATEX certified GC Ex na with Mag-Pac module SIRA 08 ATEX 4278X Ex na IIC T3 Gc II 3 G The equipment may be used in a CAT 3 environment in the presents of flammable gases and vapours only. The apparatus
Brass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
KJ Main Components - 120V 60Hz. Jetter. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Jetter KJ-0 Main Components - 0V 0Hz 0 0 NOTE: Order parts by Catalog Number only. Decal, Potable Water 0 Decal, Model Number Decal, Warning Motor Shroud 0 Hand Grip Handle Cord Wrap Pan Head Screw, #
International approvals.
E X - P L U G A N D R E C E P T A C L E A to 25 A plugs and receptacles plastic version for Zone 2 A good connection Providing electrical energy there, where it is most needed even in hazardous areas for
The table below outlines the typical compatibility of each bracket with relevant equipment, for other equipment please contact nvent representative.
Accessories SUPPORTS Support brackets are used to fi equipment such as thermostats or junction boes on pipes or cable trays. Support brackets require additional pipe straps which have to be ordered separately.
Plastic tube variable area flowmeter for liquids and gases
Plastic tube variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or fusion welding connections)
CNC DISTRIBUTION. ITEM NO Description Quantity. * 2ea Bolts and Nuts * Steel Hinged Body * Neoprene Gasket
Steel and Stainless Pipe Repair Clamp * 2ea Bolts and Nuts * Steel Hinged Body * Neoprene Gasket Steel Hinged Pipe Repair Clamp CNC1530 1/2 Steel Pipe Repair Clamp 10 CNC1531 3/4 Steel Pipe Repair Clamp
A good connection. International approvals.
E X - P L U G S A N D R E C E P T A C L E S A to A Plastic version for Zone and Zone A good connection Providing electrical energy there, where it is most needed even in hazardous areas for the Zones,,
INSTALLATION MANUAL XMT MAGNETOSTRICTIVE LEVEL PROBE
INSTALLATION MANUAL XMT MAGNETOSTRICTIVE LEVEL PROBE INDEX INDEX... 2 REVISION INDEX... 2 INTRODUCTION... 3 GENERAL WARNINGS... 3 DESCRIPTION... 4 MAIN COMPONENTS... 5 MECHANICAL INSTALLATION... 6 INSTALLATION