P U M P S R U G G E D C O N S T R U C T I O N. S O L I D P E R F O R M A N C E. SUBMERSIBLE MOTORS - 50 Hz. Products from an ISO 9001 COMPANY

Transcription

1 P U M P S R U G G E D C O N S T R U C T I O N. S O L I D P E R F O R M A N C E SUBMERSIBLE MOTORS - 50 Hz Products from an ISO 9001 COMPANY

2

3 I N D E X SUBMERSIBLE MOTORS - ECO Series (50Hz) Construction, Product Applications & Characteristics... Model Designation & Shaft Extension Height... Construction Features...4 Cross Sectional Drawing & Mounting Dimensions Technical Data & Capacitor Details Electrical Data Dimensions & Weights SUBMERSIBLE MOTORS - ELEGANT Series (50Hz) Construction, Product Applications & Characteristics...17 Cross Sectional Drawing & Mounting Dimensions...18 Construction Features, Technical Data & Capacitor Details...19 Electrical Data...0 Dimensions & Weights...1 CHARTS Cable Selection Chart...- Notes...4

4 G E N E R A L DATA BOREHOLE SUBMERSIBLE MOTORS ECO SERIES Construction Tormac ECO series submersible motors are ingeniously designed and developed employing latest engineering softwares, high-tech machinery & tools with the complement of cutting edge technology for hardwearing and maintenance free operations and to ensure relentless performance. The electrical conditions such as voltage, frequency and the operating conditions are taken into account in designing the winding and cooling system. The profound experience of the company facilitate to meet out the demanding technological challenges across the world. Tried and trusted indigenously improved design, combined with the most optimized efficiency in electromagnetic design exceptionally ensures trouble free performance. The integrated and most modern quality assurance systems used at every stage of production and flawless workmanship lead to sustained and consistent operation. Tormac ECO series motors are squirrel cage, water filled and water cooled rewindable type. The winding of these two pole motors are made of a special water proof wire of pure electrolytic copper insulated with synthetic film or thermoplastic material. All single phase motors are fitted with thermal protector to avoid winding burnouts. The stator shell, housings shell & motor base are made of fabricated S.S 04/16 which prevents the motor from corrosion. These motors are pre-filled with environmentally safe deionised water which acts as a lubricant & coolant. The prefilled water level to be ensured at the time of installation. A uniquely designed thrust bearing with high thrust capacity and good quality shaft seals are used to enhance the strength & durability. All single phase motors are supplied with suitable control boxes. The main advantage of rewindable motor construction is making the repair and rewinding easier and hassle free at field levels. All Tormac motors are produced in accordance with ISO 9001 standards and mounting dimensions with NEMA standard. Applications Public & Industrial Water Supply Sumps / Reservoirs Fire Fighting Equipments Pressure Boosting Systems Irrigation & Fountains Water Treatment Plants High Rise Buildings Agricultural Lands Stock Breeding, Laboratories Sprinkler Systems and Mining Characteristics Highly reliable, tried & tested. High efficiency Stainless steel stator shell, motor base & housings shell to prevent corrosion. The high quality shaft seal and sand guard prevent ingress of liquid and sand. Uniquely designed thrust bearing to withstand high down thrust loads. Higher starting torque to run in tough conditions. The shaft is designed for optimal power transmission. End connections & shaft extension are designed according to NEMA standards. The company reserves the right to modify the technical specifications and illustrations without prior notice.

5 G E N E R A L DATA BOREHOLE SUBMERSIBLE MOTORS ECO & ELEGANT SERIES Model Designation BOREHOLE SUBMERSIBLE MOTORS Submersible Motor Series D = Water Filled N = Non - Toxic Liquid Filled - - Voltage (A=110, B=180, C=00, D=0, E=0, F=40, G=00, H=50, I=80, J=400, K=415, L=440, M=460, N=55, P=575, Z=415 / 450) Phase / Connection / Frequency Nominal Motor Diameter 4" = 100mm, 6" = 150mm, 8" = 00mm 10" = 50mm S - 1Ph, CSR, wire / 50Hz T - Ph, DOL ( ) / 50Hz D - Ph, SD ( Y - ) / 50Hz Motor Power 0 = 0.7, 05 = 0.55, 11 = 1.1, 75 = 7.5, 110 = = 18.5, 70 = 7, 750 = 75, 90 = 9, 1000 = 100, 150 = 15, 1500 = 150, 1750 = = 00, 50 = 5, 500 = 50, 000 = = 50, 4000 = 400. Materials of Construction (Version TA, TB) TA = S.S 04 Housings with top shell (ECO & ELEGANT Series) TB = S.S.04 Housing Shell without top shell TB SERIES TA SERIES Shaft Extension Height & Free End Play S.No. Description Position 4" 6" 8" 10" 01 Lift Condition Maximum Minimum Rest Condition Maximum Minimum * All dimensions are in inches During every servicing, the free end play must be checked with the above values. If the shaft extension height measured differs, the motor thrust bearing could possibly be damaged and should be replaced.

6 G E N E R A L DATA Construction Features ECO SERIES - 4" Components Version - TA Version - TN Seal Housing Upper & Lower Support Shell Upper & Lower Support Shaft Seal Wound Stator Shell Spline Shaft Rotor Shaft Radial Bearings Thrust Segment Carrier/Segments Thrust Disc Pressure Equalizing Diaphragm Diaphragm Cover Cast Iron with S.S.04 Shell S.S 04 Cast Iron NBR S.S Ph EN-8/EN-9 Graphite Carbon SG Iron / S.S 40 Graphite Carbon HNBR S.S 04 Cast Iron with S.S.16 Shell S.S 16 Cast Iron NBR S.S Ph EN-8/EN-9 Graphite Carbon SG Iron / S.S 40 Graphite Carbon HNBR S.S 16 Construction Features ECO SERIES - 6" Components TA Version TB TN *Seal Housing Upper & Lower Support Shell Upper & Lower Support Shaft Seal Wound Stator Shell Spline Shaft Rotor Shaft Radial Bearings Thrust Segment Carrier/Segments Thrust Disc Pressure Equalizing Diaphragm Diaphragm Cover S.S 04 S.S 04 S.S 04 NBR S.S. 04 S.S.17-4 Ph EN-8/EN-9 Graphite Carbon SG Iron/S.S. 40 Graphite Carbon EPDM S.S. 04 Cast Iron S.S 04 Cast Iron NBR S.S 04 S.S Ph EN-8/EN-9 Graphite Carbon SG Iron/S.S 40 Graphite Carbon EPDM S.S 04 S.S 16 S.S 16 S.S 16 NBR S.S 16 S.S Ph EN-8/EN-9 Graphite Carbon SG Iron/S.S 40 Graphite Carbon EPDM S.S 16 Construction Features ECO SERIES - 8" & 10" Components Version - TB *Seal Housing Upper & Lower Support Shell Upper & Lower Support Shaft Seal Wound Stator Shell Spline Shaft Rotor Shaft Radial Bearings Thrust Segment Carrier/Segments Thrust Disc Pressure Equalizing Diaphragm Diaphragm Cover Cast Iron Cast Iron Cast Iron NBR S.S 04 S.S Ph EN-8/EN-9 Graphite Carbon SG Iron/S.S 40 Graphite Carbon NBR S.S 04 4

7 E C O S E R I E S ( 4 " ) CROSS SECTIONAL DRAWING MOUNTING DIMENSIONS Stud Sand Protector Bearing Housing Shell Oil Seal PCD 5/16-4 UNF-4(4 Studs) on PCD 76. SPACE FOR CABLE LEAD OUTLET Housing Pipe - Upper Bearing Housing - Upper D1 Radial Bearing L L L1 Wound Stator OD Dynamically Balanced Rotor H Radial Bearing Housing Pipe - Lower Bearing Housing - Lower Counter Thrust Plate Counter Thrust Disc Counter Thrust Segment Counter Thrust Base Thrust Base Housing Diaphragm Motor Base Doom Nut Spline Data-14 teeth, 4/48 Pitch, 0 Degree pressure angle, Hator fillet root, Side fit, tolerance Class-5, In accordance with ANSI B9-1 4" L1 0 L 0.5 Dimensions in inches L 1.0 OD.8 ODI 1.45 OD All the Mounting dimensions are in accordance with NEMA standards. L

8 E C O S E R I E S ( 6 " ) CROSS SECTIONAL DRAWING MOUNTING DIMENSIONS Sand Guard Cable Grommet Washer Grommet Stud Upper Housing Upper Shell Nut 'O' Ring L1 L D D1 On PCD 4-75 Studs L L4 D Upper Housing Shell OD Rotor Stator SS Shell Bush Winding Guard Lower Housing Lower Housing Shell Tie Bolt Thrust Base Housing Shell Key Thrust Pad Thrust Base Housing Thrust Base Rocker Screw Rocker Nut Nut Cap Washer Doom Nut Breather Diaphragm Diaphragm Plate Motor Base Spline Data-15 teeth, 16/ Pitch, 0 Degree pressure angle, Hator fillet root, Side fit, tolerance Class-5, In accordance with ANSI B9-1 6" L1.87 L 1.45 Dimensions in inches L 0.19 OD 5.6 DI 0.99 D 0 6

9 C R O S S S E C T I O N A L D R AW I N G 8 / 10" Submersible Motors ECO Series Sand Protector (Rubber) Seal Housing Cable Lead Sand Protector (S.S) Shaft Seal Water Filling Plug Cable Grommet Bearing Housing-Upper Wound Stator Radial Bearing Dynamically Balanced Rotor Bearing Housing-Lower Radial Bearing Support Guide Ring Counter Thrust Plate Counter Thrust Disc Thrust Bearing Segment Drain Plug Motor Base Diaphragm Cover External Circlip Adjustment Rocker Screw Doom Nut Pressure Equalizing Diaphragm Diaphragm Bolt 7

10 M O U N T I N G D I M E N S I O N S 8" / 10" Submersible Motors ECO Series ø0.688 equi spaced A / A Nos ON PCD 6 OD D A D1 A L L1 L H.95 Spline Data- teeth, 16/ Pitch, 0 Degree pressure angle, Hator fillet root, Side fit, tolerance Class-5, In accordance with ANSI B9-1 OD D A D1 A L L1 L H 8" Motor Dimensions in inches 10" Motor Dimensions in inches L1 L L OD D1 D L1 L L OD D1 D / (Min) All the Mounting dimensions are in accordance with NEMA standards. 8

11 T E C H N I C A L DATA ECO SERIES 50Hz Specifications Nominal Diameter (4") Nominal Diameter (6") Rated Output & Voltage 0.7 to. - 0V, 1Ph, Wire 0.7 to /415V, Ph, ( ). to 45-80/415V, Ph Rated Speed Voltage Tolerance Protection Rotation Sequence Outer Diameter Duty Linear flow Liquid Temperature Switching Frequency 900 rpm -15% + 6% IP 58 CCW - 1Ph CW, CCW - Ph 98mm S1 (Continuous) 0.15m/sec 8 0 C max. 0 Times / hour 900 rpm -15% + 6% IP 58 CW, CCW - Ph 14mm S1 (Continuous) 0.15m/sec 0 8 C max. 0 Times / hour Thrust load Mounting Dimensions 0.7 to - 000N/650lbs. to N/1500lbs NEMA Standard. to N/000lbs 6 to N/6000lbs NEMA Standard Starting Method 1 Ph - CSR / CSCR Ph - DOL. to 45 - DOL 5.5 to 45 - SD Motor Lead out type Class of Insulation /4 core Rubber Insulated Flat Cable leads, internally connected with the windings. Y /4 core Rubber Insulated Flat Cable leads, internally Connected with the windings Y Capacitor Details for 4" Single Phase 0V Submersible Motors (CSCR) Running Capacitor ( fd) Starting Capacitor ( fd) 0.7 D4-0 TA-SE 0 60 / D4-05 TA-SE / 100 D4-07 TA-SE / D4-11 TA-SE / 150 D4-15 TA-SE / 50. D4 - TA-SE / 50 9

12 T E C H N I C A L DATA ECO SERIES 50Hz Specifications Nominal Diameter (8") Nominal Diameter (10") Rated Output & Voltage Rated Speed Voltage Tolerance Protection Rotation Sequence 15 to 9-80/415V, Ph, (WYE-DELTA) 900 rpm -15% + 6% IP 58 CW, CCW - Ph 110 to 00-80/415V, Ph, (WYE-DELTA) 900 rpm -15% + 6% IP 68 CW, CCW - Ph Outer Diameter Duty Linear flow Liquid Temperature Switching Frequency Upto 40 HP - 187mm 50 to 15 HP - 194mm S1 (Continuous) 0.16m/sec 0 8 C max. 10 Times / hour 1mm S1 (Continuous) 0.16m/sec 0 8 C max. 10 Times / hour Thrust load Mounting Dimensions 15 to N/604lbs to N/10000lbs NEMA Standard 110 to N/16485lbs NEMA Standard Starting Method 15 to 9 - DOL & SD 110 to 00 - DOL & SD Motor Lead out type /4 core Rubber Insulated Flat Cable leads, internally Connected with the windings /4 core Rubber Insulated Flat Cable leads, internally Connected with the windings Class of Insulation Y Y 10

13 E L E C T R I C A L DATA ECO SERIES 50Hz 4", Single phase, 0V, Submersible Motors HP Current (A) Locked Rotor Amps Eff% Full Load Phase Angle Thrust Capacity (N) Starting Torque (Nm) Rated Torque (Nm) D4-0 TA-SE D4-05 TA-SE D4-07 TA-SE D4-11 TA-SE D4-15 TA-SE D4- TA-SE ", Three phase, V / WYE-DELTA, Submersible Motors * HP Current (A) Locked Rotor Amps Eff% Full Load Phase Angle Thrust Capacity (N) Starting Torque (Nm) Rated Torque (Nm) D4-0 TA-TK D4-05 TA-TK D4-07 TA-TK D4-11 TA-TK D4-15 TA-TK D4- TA-TK D4-0 TA-TK D4-7 TA-TK D4-40 TA-TK D4-55 TA-TK D4-75 TA-TK * For AISI 16 models replace TA with TN. 11

14 E L E C T R I C A L DATA ECO SERIES 50Hz 6", Three phase, 415V / WYE-DELTA, Submersible Motors (TB SERIES) * HP Current (A) Locked Rotor Amps Eff% Full Load Phase Angle Thrust Capacity (N) Starting Torque (Nm) D6- TB-TK Rated Torque (Nm) D6-0 TB-TK D6-7 TB-TK D6-40 TB-TK D6-45 TB-TK D6-55 TB-TK D6-75 TB-TK D6-9 TB-TK D6-110 TB-TK D6-10 TB-TK D6-150 TB-TK D6-185 TB-TK D6-0 TB-TK D6-60 TB-TK D6-00 TB-TK D6-70 TB-TK D6-450 TB-TK * The penultimate digit of the model identification "T" denotes DOL and which will be replaced with "D" in case of phase SD Motors 6", Three phase, 415V / WYE-DELTA, Submersible Motors (TA SERIES) * HP Current (A) Locked Rotor Amps Eff% Full Load Phase Angle * The penultimate digit of the model identification "T" denotes DOL and which will be replaced with "D" in case of phase SD Motors * For AISI 16 models replace TA with TN. Thrust Capacity (N) Starting Torque (Nm) D6- TA-TK Rated Torque (Nm) D6-0 TA-TK D6-7 TA-TK D6-40 TA-TK D6-45 TA-TK D6-55 TA-TK D6-75 TA-TK D6-9 TA-TK D6-110 TA-TK D6-10 TA-TK D6-150 TA-TK D6-185 TA-TK D6-0 TA-TK D6-60 TA-TK D6-00 TA-TK D6-70 TA-TK D6-450 TA-TK

15 E L E C T R I C A L DATA ECO SERIES 50Hz 8", Three phase, 415V / WYE-DELTA, Submersible Motors HP Current (A) Locked Rotor Amps Eff% Full Load Phase Angle Thrust Capacity (N) Starting Torque (Nm) Rated Torque (Nm) D8-150 TB-TK D8-185 TB-TK D8-0 TB-TK D8-60 TB-TK D8-00 TB-TK D8-70 TB-TK D8-450 TB-TK D8-550 TB-TK D8-60 TB-TK D8-750 TB-TK D8-90 TB-TK * The penultimate digit of the model identification "T" denotes DOL and which will be replaced with "D" in case of phase SD Motors 10", Three phase, 415V / WYE-DELTA, Submersible Motors HP Current (A) Locked Rotor Amps Eff% Full Load Phase Angle Thrust Capacity (N) Starting Torque (Nm) Rated Torque (Nm) D TB-TK D10-90 TB-TK D TB-TK D TB-TK D TB-TK D TB-TK D TB-TK * The penultimate digit of the model identification "T" denotes DOL and which will be replaced with "D" in case of phase SD Motors 1

16 D I M E N S I O N S & W E I G H T S ECO SERIES 50Hz 4", Single phase, 0V, Submersible Motors HP Diameter (OD) in inches Height (H) in inches Standard Motor Leads Nett. Wt. in lbs (mm ) Length (m) D4-0 TA-SE x D4-05 TA-SE x D4-07 TA-SE x D4-11 TA-SE x.5 D4-15 TA-SE x.5 D4 - TA-SE x.5 4", Three phase, V, Submersible Motors HP Diameter (OD) in inches Height (H) in inches Standard Motor Leads Nett. Wt. in lbs (mm ) Length (m) D4-0 TA-TK x D4-05 TA-TK x D4-07 TA-TK x D4-11 TA-TK x D4-15 TA-TK x D4 - TA-TK x D4-0 TA-TK x D4-7 TA-TK x.5 D4-40 TA-TK x.5 D4-55 TA-TK x 4.5 D4-75 TA-TK x 4.5 * For AISI 16 models replace TA with TN. 14

17 D I M E N S I O N S & W E I G H T S ECO SERIES 50Hz 6", Three phase, 415V, / WYE-DELTA Submersible Motors Standard Motor Leads Diameter (OD) Height (H) Nett. Wt. HP in inches in inches in lbs DOL (mm ) SD (mm ) Length (m) D6 - TB-TK..0 D6-0 TB-TK D6-7 TB-TK D6-40 TB-TK D6-45 TB-TK D6-55 TB-TK D6-75 TB-TK D6-9 TB-TK D6-110 TB-TK D6-10 TB-TK D6-150 TB-TK 15 0 D6-185 TB-TK D6-0 TB-TK 0 D6-60 TB-TK 6 5 D6-00 TB-TK 0 40 D6-70 TB-TK 7 50 D6-450 TB-TK x x x x x x 4 4 x x 4 4 x x 6 4 x x 6 4 x x 6 4 x x 10 4 x x 10 4 x x 10 4 x x 10 4 x x 10 4 x x 16 4 x x 16 4 x * The penultimate digit of the model identification "T" denotes DOL and which will be replaced with "D" in case of phase SD Motors 6", Three phase, 415V, / WYE-DELTA Submersible Motors Standard Motor Leads Diameter (OD) Height (H) Nett. Wt. HP in inches in inches in lbs DOL (mm ) SD (mm ) Length (m) D6 - TA-TK..0 D6-0 TA-TK D6-7 TA-TK D6-40 TA-TK D6-45 TA-TK D6-55 TA-TK D6-75 TA-TK D6-9 TA-TK D6-110 TA-TK D6-10 TA-TK D6-150 TA-TK 15 0 D6-185 TA-TK D6-0 TA-TK 0 D6-60 TA-TK 6 5 D6-00 TA-TK 0 40 D6-70 TA-TK 7 50 D6-450 TA-TK x x x x x x 4 4 x x 4 4 x x 6 4 x x 6 4 x x 6 4 x x 10 4 x x 10 4 x x 10 4 x x 10 4 x x 10 4 x x 16 4 x x 16 4 x * The penultimate digit of the model identification "T" denotes DOL and which will be replaced with "D" in case of phase SD Motors * For AISI 16 models replace TA with TN. 15

18 D I M E N S I O N S & W E I G H T S ECO SERIES 50Hz 8", Three phase, 415V, / WYE-DELTA Submersible Motors HP Diameter (OD) in inches Height (H) in inches Nett. Wt. in lbs DOL(mm ) Standard Motor Leads SD(mm ) Length (m) D8-150 TB-TK D8-185 TB-TK D8-0 TB-TK D8-60 TB-TK D8-00 TB-TK D8-70 TB-TK D8-450 TB-TK D8-550 TB-TK D8-60 TB-TK D8-750 TB-TK D8-90 TB-TK x 10 4 x 10 4 x 10 4 x 10 4 x 10 4 x 16 4 x 16 4 x 5 4 x 5 4 x 5 4 x 5 4 x 4 4 x 4 4 x 4 4 x 6 4 x 6 4 x 10 4 x 10 4 x 16 4 x 16 4 x 16 4 x * The penultimate digit of the model identification "T" denotes DOL and which will be replaced with "D" in case of phase SD Motors 10", Three phase, 415V, / WYE-DELTA Submersible Motors HP Diameter (OD) in inches Height (H) in inches Nett. Wt. in lbs DOL(mm ) Standard Motor Leads SD(mm ) Length (m) D TB-TK x 5 4 x 5 D10-90 TB-TK x 5 4 x 5 D TB-TK x 5 4 x 5 D TB-TK x 5 4 x 5 D TB-TK x 5 4 x 5 D TB-TK x 5 4 x 5 D TB-TK x 5 4 x 5 * The penultimate digit of the model identification "T" denotes DOL and which will be replaced with "D" in case of phase SD Motors 16

19 G E N E R A L DATA BOREHOLE SUBMERSIBLE MOTORS ELEGANT SERIES Construction Tormac Elegant series submersible motors are ingeniously designed and developed employing latest engineering softwares, high-tech machinery & tools with the complement of cutting edge technology for hardwearing and maintenance free operations and to ensure relentless performance. The electrical conditions such as voltage, frequency and the operating conditions are taken into account in designing the winding and cooling system. The profound experience of the company facilitate to meet out the demanding technological challenges across the world. Tried and trusted indigenously improved design, combined with the most optimized efficiency in electromagnetic design exceptionally ensures trouble free performance. The integrated and most modern quality assurance systems used at every stage of production and flawless workmanship lead to sustained and consistent operation. Tormac Eelegant series motors are squirrel cage, Non toxic liquid filled and liquid cooled non rewindable type. The winding of these two pole motors are made of high quality enameled copper wire. The stator shell, housings shell & motor base are made of fabricated S.S 04/16 which prevents the motor from corrosion. These motors are pre-filled with environmentally safe edible grade oil which acts as a lubricant. A uniquely designed angular contact ball bearing to with stand high thrust capacity and good quality shaft seals are used to enhance the strength & durability. All single phase motors are supplied with suitable control boxes. All Tormac motors are produced in accordance with ISO 9001 standards and mounting dimensions with NEMA standard. Applications Public & Industrial Water Supply Sumps / Reservoirs Fire Fighting Equipments Pressure Boosting Systems Irrigation & Fountains Water Treatment Plants High Rise Buildings Agricultural Lands Stock Breeding, Laboratories Sprinkler Systems and Mining Characteristics Highly reliable, tried & tested. High efficiency Stainless steel stator shell, motor base & housings shell to prevent corrosion. The high quality shaft seal and sand guard prevent ingress of liquid and sand. Uniquely designed thrust bearing to withstand high down thrust loads. Higher starting torque to run in tough conditions. The shaft is designed for optimal power transmission. End connections & shaft extension are designed according to NEMA standards. The company reserves the right to modify the technical specifications and illustrations without prior notice.

20 E L E G A N T S E R I E S ( 4 " ) CROSS SECTIONAL DRAWING MOUNTING DIMENSIONS Cable Cable Clamp Cable Plug Cable Grommet Grommet Washer OD M8x1.5 Stud (4 Nos) Space for cable lead out Shaft Extension Mounting Stud Nut Sand Protector Upper Shell L (Spline Length) D1 Mechanical Seal 'O' Ring Bearing Housing Upper Bearing Winding Guard L L1 Upper Housing Pipe Wounded Stator Rotor H Stator Bearing Bearing Housing Lower Pressure Equalizing Diaphragm Dimensions are in Inches Diaphragm Cover L1 L L D1 OD PCD 4"

21 ELEGANT SERIES 50Hz Construction Features Components Seal Housing Upper & Lower Support Shell Upper & Lower Support Shaft Seal Wound Stator Shell Spline Shaft Rotor Shaft Radial Bearings Thrust Segment Carrier/Segments Thrust Disc Pressure Equalizing Diaphragm Diaphragm Cover Version - TA Cast Iron with S.S.04 Shell S.S 04 - NBR S.S. 04 S.S.17-4 Ph EN-8D Hardened S.S. S.S. 40 Carbon HNBR S.S. 04 Technical Data Specifications Nominal Diameter (4") Rated Output & Voltage Rated Speed Voltage Tolerance Protection Rotation Sequence Outer Diameter Duty Linear flow Liquid Temperature Switching frequency Thrust Load Mounting Dimensions Starting Method Motor Lead Out Type 0.7 to - 1Ph, 0V, 0.7 to Ph, 80V 900 rpm +6% IP 68 1Ph - CCW, Ph - Electrically reversible 96mm S1 (Continuous) 0.15m/sec 8 0 C 0 starts / hour 0.7 to N 1.1 to 4-500N 5.5 to N NEMA standard 1 Ph - CSR / CSCR, Ph - DOL Removable type - 4 core Class of Insulation " F " Capacitor Details for 4" Single Phase 0V Submersible Motors (CSCR) Running Capacitor ( fd) Starting Capacitor ( fd) N4-0 TA-SE N4-05 TA-SE N4-07 TA-SE N4-11 TA-SE N4-15 TA-SE 6 60 / / / / / 50 19

22 E L E C T R I C A L DATA ELEGANT SERIES 50Hz 4", Single phase, 0V, Non-Toxic Liquid filled Submersible Motors HP Current (A) Locked Rotor Amps Eff% Full Load Phase Angle Thrust Capacity (N) Torque (Nm) CSR Capacitor ( fd) N4-0 TA-SE N4-05 TA-SE N4-07 TA-SE N4-11 TA-SE N4-15 TA-SE N4- TA-SE ", Three phase, 80V, Non-Toxic Liquid filled Submersible Motors HP Current (A) Locked Rotor Amps Eff% Full Load Phase Angle Thrust Capacity (N) Torque (Nm) N4-0 TA-TJ N4-05 TA-TJ N4-07 TA-TJ N4-11 TA-TJ N4-15 TA-TJ N4- TA-TJ N4-0 TA-TJ N4-7 TA-TJ N4-40 TA-TJ N4-55 TA-TJ N4-75 TA-TJ

23 D I M E N S I O N S & W E I G H T S ELEGANT SERIES 50Hz 4", Single phase, 0V, Non-Toxic Liquid filled Submersible Motors HP Diameter (OD) in Inches Height in Inches Net Weight in lbs Standard Motor Leads mm Length (m) N4-0 TA-SE x N4-05 TA-SE x N4-07 TA-SE x N4-11 TA-SE x N4-15 TA-SE N4- TA-SE x 4 x 4", Three phase, 80V, Non-Toxic Liquid filled Submersible Motors HP Diameter (OD) in Inches Head in Net Weight Standard Motor Leads Inches in lbs mm Length (m) N4-0.7 TA-TJ x N TA-TJ x N4- TA-TJ x N4-11 TA-TJ x N4-15 TA-TJ x N4- TA-TJ x /.5 N4-0 TA-TJ x.5 N4-7 TA-TJ x.5.5 N4-40 TA-TJ x.5.5 N4-55 TA-TJ x.5 N4-75 TA-TJ x.5 1

24 CABLE SELECTION CHART For Single Phase wire (D.O.L.) Motor Maximum Length of Copper Cable Motor Rating CABLE SIZE IN SQUARE MILLIMETRES VOLTS HP VOLT 50Hz MAXIMUM LENGTH IN METRES For Three Phase wire (D.O.L.) Motor Maximum Length of Copper Cable Motor Rating CABLE SIZE IN SQUARE MILLIMETRES VOLTS HP VOLT 50Hz MAXIMUM LENGTH IN METRES The given cable lengths are the maximum one from POWER TO MOTOR, Exceeding the lengths mentioned will void warranty.

25 CABLE SELECTION CHART For Three Phase 6 wire (S.D.) Motor Maximum Length of Copper Cable Motor Rating CABLE SIZE IN SQUARE MILLIMETRES VOLTS HP VOLT 50Hz MAXIMUM LENGTH IN METRES The given cable lengths are the maximum one from POWER TO MOTOR, Exceeding the lengths mentioned will void warranty.

26 Notes :...

27

28 T H E P O W E R B E H I N D T H E F O R C E Naargo Industries Private Limited, one of the leading manufacturers of latest state of art, large range of pumps and motors, is managed by veterans who are in the pump industry for almost half a century. The products are employed in various applications like irrigation, domestic, civil construction, de-watering etc; The Company has a strong distribution network in India for sales & service and a strong global presence. Quality is the key factor in Naargo's products. The expansive infrastructure and environment accredited with ISO 9001 quality certification, latest engineering softwares, high-tech machinery, futuristic pumping technology and high caliber workforce facilitate the production of flawless and efficient products on par with international standards under the brand name of "Tormac". The well equipped R & D wing stays alive to the changing global trends and comes out with viable solutions for innovative product development and upgradation. The Products currently available include Stainless Steel Submersible Pumps, 4" Thermoplastic Submersible Pumps, 6" & 8" Cast Iron Submersible Pumps, Submersible Motors and Controls, Centrifugal Pumps, Inline Booster Pumps, Jet Self-priming Pumps and Peripheral Pumps. The power, performance and endurance of the products backed by the uncompromising teamwork and value systems will certainly propel the company's growth towards new horizons in the pump industry. IC-SMF-I/15-E5