TECHNICAL SPECIFICATIONS LINK
|
|
|
- Amie O’Brien’
- 5 years ago
- Views:
Transcription
1 TECHNICAL SPECIFICATIONS LINK
2 TECHNICAL DATA MATERIALS TECHNICAL DATA LINK CELLS NUMBER CLOSED BOX FLAT AREA M ,5 SPAN M 11,04 11,51 11,96 12,5 ASPECT RATIO 5,3 5,3 5,3 5,3 PROJECTED AREA M2 19,55 21,23 22,9 24,99 SPAN 8,65 9,29 9,32 9,76 ASPECT RATIO 3,82 3,82 3,82 3,82 FLATTENING % CORD MAXIMUM 2,56 2,67 2,77 2,9 MINIMUM 0,6 0,62 0,65 0,69 AVERAGE 2,08 2,17 2,25 2,34 LINES TOTAL METERS M HEIGHT M 6,87 7,11 7,41 7,72 NUMBER MAIN 3/3/4/2 3/3/4/2 3/3/4/2 3/3/4/2 RISERS NUMBER 4 A/B/C/D A/B/C/D A/B/C/D A/B/C/D TRIMS m/m ACCELERATOR m/m TOTAL WEIGHT MINIMUM KG IN FLIGHT MAXIMUM KG GLIDER WEIGHT KG 5,2 5,5 5,8 6,1 CERTIFICATION EN/LTF B B B B CANOPY FABRIC CODE SUPPLIER UPPER SURFACE SKYTEX E77 PORCHER IND (FRANCE) BOTTOM SURFACE N 20D MF DOMINICO TEX CO PROFILES 30D FM DOMINICO TEX CO DIAGONALS 30D FM DOMINICO TEX CO LOOPS LKI - 10 KOLON IND. (KOREA) REIFORCEMENT LOOPS W-420 D-P (GERMANY) TRAILING EDGE REIFORCEMENT MYLAR D-P (GERMANY) RIBS REIFORCEMNET W-420 D-P (GERMANY) THREAD SERAFIL 60 AMAN (GERMANY) SUSPENSION LINES FABRIC CODE SUPPLIER UPPER CASCADES TNL EDELRID (GERMANY) MIDDLE CASCADES TNL TEIJIM LIMITED (JAPAN) MIDDLE CASCADES TNL TEIJIM LIMITED (JAPAN) MAIN TNL TEIJIM LIMITED (JAPAN) MAIN TNL TEIJIM LIMITED (JAPAN) MAIN TNL TEIJIM LIMITED (JAPAN) MAIN BREAK TNL TEIJIM LIMITED (JAPAN) THREAD SERAFIL 60 AMAN (GERMANY) RISERS FABRIC CODE SUPPLIER MATERIAL G-R 22 TECNI SANGLES (FRANCE) COLOR INDICATOR PAD TECNI SANGLES (FRANCE) THREAD V138 COATS (ENGLAND) MAILLONS MRI4 ANSUNG PRECISION (KOREA) PULLEYS 224 HARKEN (USA) 2
3 3 SUSPENSION PLAN
4 4 RISERS PLAN
5 COLORS TECHNICAL DATA WING LOAD TECHNICAL DATA SAPPHIRE 1 ROYAL BLUE MAIN TOP REF: LIMA HORNS REF: BLACK SHADOW REF: ROYAL BLUE MAIN BOTTOM REF: BLACK LEADING SHADOW REF: 102 MONARCA 1 ORANGE MAIN TOP REF: GOLD HORNS REF: BLACK SHADOW REF: ORANGE MAIN BOTTOM REF: BLACK LEADING SHADOW REF: 102 KAKI 1 LIMA MAIN TOP REF: DRAGON RED HORNS REF: BLACK SHADOW REF: LIMA MAIN BOTTOM REF: BLACK LEADING SHADOW REF: 102 LINK P.T.V. KG/M2 P.T.V. KG/M2 P.T.V. KG/M2 P.T.V. KG/M2 65 = 2,83 80 = 3,20 95 = 3, = 3,73 66 = 2,87 81 = 3,24 96 = 3, = 3,76 67 = 2,91 82 = 3,28 97 = 3, = 3,80 68 = 2,96 83 = 3,32 98 = 3, = 3,83 69 = 3,00 84 = 3,36 99 = 3, = 3,86 70 = 3,04 85 = 3, = 3, = 3,90 71 = 3,09 86 = 3, = 3, = 3,93 72 = 3,13 87 = 3, = 3, = 3,97 73 = 3,17 88 = 3, = 3, = 4,00 74 = 3,22 89 = 3, = 3, = 4,03 75 = 3,26 90 = 3, = 3, = 4,07 76 = 3,30 91 = 3, = 3, = 4,10 77 = 3,35 92 = 3, = 3, = 4,14 78 = 3,39 93 = 3, = 4, = 4,17 79 = 3,43 94 = 3, = 4, = 4,20 80 = 3,48 95 = 3, = 4, = 4,24 81 = 3,52 96 = 3, = 4, = 4,27 82 = 3,57 97 = 3, = 4, = 4,31 83 = 3,61 98 = 3, = 4, = 4,34 84 = 3,65 99 = 3, = 4, = 4,37 85 = 3, = 4, = 4, = 4,41 MAIN TOP: 1 SHADOW: 3 HORN: 2 MAIN BOTTOM: 4 LEADING SHADOW: 5 5
6 LINES TECHNICAL DATA LINK 23 REF. CODE m/m REF. CODE m/m REF. CODE m/m REF. CODE m/m REF. CODE m/m A B C D BRAKE A1 TNL-080-green 335 B1 TNL-080-blue 330 C1 TNL-080-blue 335 D1 TNL-080-blue 340 br3 TNL-080-red 985 A2 TNL-080-green 295 B2 TNL-080-blue 295 C2 TNL-080-blue 290 D2 TNL-080-blue 290 br5 TNL-080-red 790 A5 TNL-080-green 305 B5 TNL-080-blue 305 C5 TNL-080-blue 300 D5 TNL-080-blue 300 br7 TNL-080-red 945 A6 TNL-080-green 325 B6 TNL-080-blue 325 C6 TNL-080-blue 325 D6 TNL-080-blue 335 br9 TNL-080-red 905 A9 TNL-080-green 325 B9 TNL-080-blue 325 C9 TNL-080-blue 325 D9 TNL-080-blue 330 br11 TNL-080-red 900 A10 TNL-080-green 290 B10 TNL-080-blue 290 C10 TNL-080-blue 285 D10 TNL-080-blue 285 br13 TNL-080-red 820 A13 TNL-080-green 290 B13 TNL-080-blue 280 C13 TNL-080-blue 280 D13 TNL-080-blue 280 br15 TNL-080-red 775 A14 TNL-080-green 305 B14 TNL-080-blue 305 C14 TNL-080-blue 305 D14 TNL-080-blue 310 br17 TNL-080-red 830 A14 TNL-080-green 330 B17 TNL-080-blue 320 C17 TNL-080-blue 315 D17 TNL-080-blue 320 br19 TNL-080-red 740 A18 TNL-080-green 280 B18 TNL-080-blue 270 C18 TNL-080-blue 265 D18 TNL-080-blue 270 br21 TNL-080-red 670 A21 TNL-080-green 300 B21 TNL-080-blue 280 C21 TNL-080-blue 270 D21 TNL-080-blue 270 br24 TNL-080-red 1345 A22 TNL-080-green 275 B22 TNL-080-blue 260 C22 TNL-080-blue 240 D22 TNL-080-blue 235 A24 TNL-080-red 2040 B24 TNL-080-red 2010 A25 TNL-080-red 1925 B25 TNL-080-red 1930 C25 TNL-080-red A1 TNL-140-green B1 TNL-140-blue C1 TNL-140-blue D1 TNL-080-blue BR1 TNL-080-red A2 TNL-140-green B2 TNL-140-blue C2 TNL-140-blue D2 TNL-080-blue BR2 TNL-080-red 915 2A3 TNL-140-green B3 TNL-140-blue C3 TNL-140-blue D3 TNL-080-blue BR3 TNL-080-red 950 2A4 TNL-140-green B4 TNL-140-blue C4 TNL-140-blue D4 TNL-080-blue BR4 TNL-080-red 990 2A5 TNL-140-green B5 TNL-140-blue C5 TNL-080-blue D5 TNL-080-blue BR5 TNL-080-red 840 2A6 TNL-140-green B6 TNL-140-blue C6 TNL-080-blue D6 TNL-080-blue A1 TNL-280-green B1 TNL-280-blue C1 TNL-280-blue D1 TNL-220-blue br1 TNL-080-red A2 TNL-220-green B2 TNL-220-blue C2 TNL-220-blue D2 TNL-220-blue br2 TNL-080-red A3 TNL-220-green B3 TNL-220-blue C3 TNL-140-blue br3 TNL-080-red 2655 STAB TNL-080-red br1 TNL-280-red 2295 Point a:
7 LINES TECHNICAL DATA LINK 25 REF. CODE m/m REF. CODE m/m REF. CODE m/m REF. CODE m/m REF. CODE m/m A B C D BRAKE A1 TNL-080-green 350 B1 TNL-080-blue 345 C1 TNL-080-blue 350 D1 TNL-080-blue 355 br3 TNL-080-red 1025 A2 TNL-080-green 305 B2 TNL-080-blue 305 C2 TNL-080-blue 305 D2 TNL-080-blue 300 br5 TNL-080-red 825 A5 TNL-080-green 320 B5 TNL-080-blue 315 C5 TNL-080-blue 315 D5 TNL-080-blue 315 br7 TNL-080-red 985 A6 TNL-080-green 340 B6 TNL-080-blue 340 C6 TNL-080-blue 340 D6 TNL-080-blue 345 br9 TNL-080-red 945 A9 TNL-080-green 340 B9 TNL-080-blue 335 C9 TNL-080-blue 340 D9 TNL-080-blue 345 br11 TNL-080-red 935 A10 TNL-080-green 305 B10 TNL-080-blue 300 C10 TNL-080-blue 300 D10 TNL-080-blue 295 br13 TNL-080-red 855 A13 TNL-080-green 300 B13 TNL-080-blue 295 C13 TNL-080-blue 290 D13 TNL-080-blue 290 br15 TNL-080-red 805 A14 TNL-080-green 320 B14 TNL-080-blue 315 C14 TNL-080-blue 315 D14 TNL-080-blue 325 br17 TNL-080-red 865 A14 TNL-080-green 345 B17 TNL-080-blue 330 C17 TNL-080-blue 330 D17 TNL-080-blue 330 br19 TNL-080-red 770 A18 TNL-080-green 290 B18 TNL-080-blue 285 C18 TNL-080-blue 280 D18 TNL-080-blue 280 br21 TNL-080-red 700 A21 TNL-080-green 315 B21 TNL-080-blue 295 C21 TNL-080-blue 280 D21 TNL-080-blue 280 br24 TNL-080-red 1405 A22 TNL-080-green 290 B22 TNL-080-blue 270 C22 TNL-080-blue 250 D22 TNL-080-blue 245 A24 TNL-080-red 2125 B24 TNL-080-red 2095 A25 TNL-080-red 2005 B25 TNL-080-red 2015 C25 TNL-080-red A1 TNL-140-green B1 TNL-140-blue C1 TNL-140-blue D1 TNL-080-blue BR1 TNL-080-red A2 TNL-140-green B2 TNL-140-blue C2 TNL-140-blue D2 TNL-080-blue BR2 TNL-080-red 955 2A3 TNL-140-green B3 TNL-140-blue C3 TNL-140-blue D3 TNL-080-blue BR3 TNL-080-red 990 2A4 TNL-140-green B4 TNL-140-blue C4 TNL-140-blue D4 TNL-080-blue BR4 TNL-080-red A5 TNL-140-green B5 TNL-140-blue C5 TNL-080-blue D5 TNL-080-blue BR5 TNL-080-red 875 2A6 TNL-140-green B6 TNL-140-blue C6 TNL-080-blue D6 TNL-080-blue A1 TNL-280-green B1 TNL-280-blue C1 TNL-280-blue D1 TNL-220-blue br1 TNL-080-red A2 TNL-220-green B2 TNL-220-blue C2 TNL-220-blue D2 TNL-220-blue br2 TNL-080-red A3 TNL-220-green B3 TNL-220-blue C3 TNL-140-blue br3 TNL-080-red 2765 STAB TNL-080-red br1 TNL-280-red 2385 Point a:
8 LINES TECHNICAL DATA LINK 27 REF. CODE m/m REF. CODE m/m REF. CODE m/m REF. CODE m/m REF. CODE m/m A B C D BRAKE A1 TNL-080-green 360 B1 TNL-080-blue 360 C1 TNL-080-blue 360 D1 TNL-080-blue 370 br3 TNL-080-red 1065 A2 TNL-080-green 320 B2 TNL-080-blue 320 C2 TNL-080-blue 315 D2 TNL-080-blue 315 br5 TNL-080-red 855 A5 TNL-080-green 330 B5 TNL-080-blue 330 C5 TNL-080-blue 325 D5 TNL-080-blue 325 br7 TNL-080-red 1025 A6 TNL-080-green 355 B6 TNL-080-blue 350 C6 TNL-080-blue 355 D6 TNL-080-blue 360 br9 TNL-080-red 980 A9 TNL-080-green 355 B9 TNL-080-blue 350 C9 TNL-080-blue 355 D9 TNL-080-blue 360 br11 TNL-080-red 975 A10 TNL-080-green 315 B10 TNL-080-blue 315 C10 TNL-080-blue 310 D10 TNL-080-blue 305 br13 TNL-080-red 890 A13 TNL-080-green 310 B13 TNL-080-blue 305 C13 TNL-080-blue 300 D13 TNL-080-blue 300 br15 TNL-080-red 840 A14 TNL-080-green 335 B14 TNL-080-blue 330 C14 TNL-080-blue 330 D14 TNL-080-blue 335 br17 TNL-080-red 900 A14 TNL-080-green 355 B17 TNL-080-blue 345 C17 TNL-080-blue 340 D17 TNL-080-blue 345 br19 TNL-080-red 800 A18 TNL-080-green 300 B18 TNL-080-blue 295 C18 TNL-080-blue 290 D18 TNL-080-blue 290 br21 TNL-080-red 725 A21 TNL-080-green 325 B21 TNL-080-blue 305 C21 TNL-080-blue 295 D21 TNL-080-blue 295 br24 TNL-080-red 1460 A22 TNL-080-green 300 B22 TNL-080-blue 280 C22 TNL-080-blue 260 D22 TNL-080-blue 255 A24 TNL-080-red 2195 B24 TNL-080-red 2175 A25 TNL-080-red 2085 B25 TNL-080-red 2095 C25 TNL-080-red A1 TNL-140-green B1 TNL-140-blue C1 TNL-140-blue D1 TNL-080-blue BR1 TNL-080-red A2 TNL-140-green B2 TNL-140-blue C2 TNL-140-blue D2 TNL-080-blue BR2 TNL-080-red 990 2A3 TNL-140-green B3 TNL-140-blue C3 TNL-140-blue D3 TNL-080-blue BR3 TNL-080-red A4 TNL-140-green B4 TNL-140-blue C4 TNL-140-blue D4 TNL-080-blue BR4 TNL-080-red A5 TNL-140-green B5 TNL-140-blue C5 TNL-080-blue D5 TNL-080-blue BR5 TNL-080-red 910 2A6 TNL-140-green B6 TNL-140-blue C6 TNL-080-blue D6 TNL-080-blue A1 TNL-280-green B1 TNL-280-blue C1 TNL-280-blue D1 TNL-220-blue br1 TNL-080-red A2 TNL-220-green B2 TNL-220-blue C2 TNL-220-blue D2 TNL-220-blue br2 TNL-080-red A3 TNL-220-green B3 TNL-220-blue C3 TNL-140-blue br3 TNL-080-red 2880 STAB TNL-080-red br1 TNL-280-red 2475 Point a:
9 LINES TECHNICAL DATA LINK 29 REF. CODE m/m REF. CODE m/m REF. CODE m/m REF. CODE m/m REF. CODE m/m A B C D BRAKE A1 TNL-080-green 380 B1 TNL-080-blue 375 C1 TNL-080-blue 380 D1 TNL-080-blue 385 br3 TNL-080-red 1115 A2 TNL-080-green 335 B2 TNL-080-blue 330 C2 TNL-080-blue 330 D2 TNL-080-blue 325 br5 TNL-080-red 895 A5 TNL-080-green 345 B5 TNL-080-blue 345 C5 TNL-080-blue 340 D5 TNL-080-blue 340 br7 TNL-080-red 1070 A6 TNL-080-green 370 B6 TNL-080-blue 365 C6 TNL-080-blue 370 D6 TNL-080-blue 375 br9 TNL-080-red 1025 A9 TNL-080-green 370 B9 TNL-080-blue 365 C9 TNL-080-blue 370 D9 TNL-080-blue 375 br11 TNL-080-red 1020 A10 TNL-080-green 330 B10 TNL-080-blue 330 C10 TNL-080-blue 325 D10 TNL-080-blue 320 br13 TNL-080-red 930 A13 TNL-080-green 325 B13 TNL-080-blue 320 C13 TNL-080-blue 315 D13 TNL-080-blue 315 br15 TNL-080-red 875 A14 TNL-080-green 350 B14 TNL-080-blue 345 C14 TNL-080-blue 345 D14 TNL-080-blue 350 br17 TNL-080-red 940 A14 TNL-080-green 375 B17 TNL-080-blue 360 C17 TNL-080-blue 355 D17 TNL-080-blue 360 br19 TNL-080-red 840 A18 TNL-080-green 315 B18 TNL-080-blue 305 C18 TNL-080-blue 305 D18 TNL-080-blue 305 br21 TNL-080-red 760 A21 TNL-080-green 340 B21 TNL-080-blue 320 C21 TNL-080-blue 305 D21 TNL-080-blue 305 br24 TNL-080-red 1525 A22 TNL-080-green 315 B22 TNL-080-blue 290 C22 TNL-080-blue 270 D22 TNL-080-blue 265 A24 TNL-080-red 2310 B24 TNL-080-red 2275 A25 TNL-080-red 2180 B25 TNL-080-red 2190 C25 TNL-080-red A1 TNL-140-green B1 TNL-140-blue C1 TNL-140-blue D1 TNL-080-blue BR1 TNL-080-red A2 TNL-140-green B2 TNL-140-blue C2 TNL-140-blue D2 TNL-080-blue BR2 TNL-080-red A3 TNL-140-green B3 TNL-140-blue C3 TNL-140-blue D3 TNL-080-blue BR3 TNL-080-red A4 TNL-140-green B4 TNL-140-blue C4 TNL-140-blue D4 TNL-080-blue BR4 TNL-080-red A5 TNL-140-green B5 TNL-140-blue C5 TNL-080-blue D5 TNL-080-blue BR5 TNL-080-red 955 2A6 TNL-140-green B6 TNL-140-blue C6 TNL-080-blue D6 TNL-080-blue A1 TNL-280-green B1 TNL-280-blue C1 TNL-280-blue D1 TNL-220-blue br1 TNL-080-red A2 TNL-220-green B2 TNL-220-blue C2 TNL-220-blue D2 TNL-220-blue br2 TNL-080-red A3 TNL-220-green B3 TNL-220-blue C3 TNL-140-blue br3 TNL-080-red 3005 STAB TNL-080-red br1 TNL-280-red 2575 Point a:
10 NIVIUK LINK 23 NIVIUK LINK 25 LINES HEIGHT m/m LINES HEIGHT m/m A B C D br A B C D br RISERS LENGHT m/m A B C D STANDARD TRIMMER OPENED ACCELERATED RISERS LENGHT m/m A B C D STANDARD TRIMMER OPENED ACCELERATED 10
11 NIVIUK LINK 27 NIVIUK LINK 29 LINES HEIGHT m/m LINES HEIGHT m/m A B C D br A B C D br RISERS LENGHT m/m A B C D STANDARD TRIMMER OPENED ACCELERATED RISERS LENGHT m/m A B C D STANDARD TRIMMER OPENED ACCELERATED 11
12 SUSPENSION TECHNICAL DATA MATERIAL CODE TNL TNL TNL TNL TNL STRENGTH CODE COLOR CODE GREEN GREEN GREEN GREEN BLUE BLUE BLUE BLUE RED RED DIAMETER M/M Ø 1,1 1,4 1,6 1,8 2,3 CORE MATERIAL TECHNORA TECHNORA TECHNORA TECHNORA TECHNORA SLEEVE MATERIAL POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER WEIGHT G/M TOTAL 1,1 1,96 2,35 2,7 4 BREAKING STRENGTH MINIMUM MAXIMUM STRENGTH AFTER BENDING TEST EN 36,7 76,1 114,2 134,7 160,1 CYCLES ELONGATION AT 5 DAN EN % 0,3 0,2 0,2 0,2 0,05 10 DAN EN % 0,5 0,3 0,3 0,3 0,1 15 DAN EN % 0,7 0,5 0,5 0,4 0,2 20 DAN EN % 1 0,6 0,6 0,4 0,2 25 DAN EN % 1,3 0,8 0,7 0,5 0,3 30 DAN EN % 2,3 1,5 1,2 0,9 0,6 75 DAN EN % 2,8 2,3 1,8 1,3 0,8 100 DAN EN % 2,7 2,2 1,7 1,1 125 DAN EN % 3,2 2,7 2 1,4 150 DAN EN % 3 2,3 1,7 175 DAN EN % 3,3 2, DAN EN % 3,8 2,8 2,2 ELONGATION MAX. BREAKING STRENGTH % 3 3,4 4 4,1 4,6 12
13 MAILLON & PULLEY TECHNICAL DATA THREAD TECHNICAL DATA DESCRIPTION MAILLON CODE MATERIAL SIZE WEIGHT TECHNICAL SPECIFICATIONS DELTA MRI4 STAINLESS STEEL 4,3 M/M 12 G/PIECE SAIL MAKING NAME SERAFIL Nº OF REFERENCE 60 MATERIAL POLYESTER TYPE OF FINISH SILK LINEAR DENSITY NM 61 / 3 (DTEX 163 * 3) BREAKING STRENGTH 3,000 CN ELONGATION 17,00% DIMENSIONS M/M L.T. 28 L.I. 20 H.T. 38 H.I. 30 O 4 E 11 T 4 LOAD KG WORKING LIMIT 150 BREAKING 750 MATERIAL AISI 304 STAINLESS STEEL STANDARD CLOSING APPLIED BY MANUAL & ENTIRE SCREWING OF THE NUT TO GUARANTEE THE HIGHEST SAFETY (NO THREAD SHOULD BE OBVIOUS) PROPIETIES SERAFIL SOLIDITY ARTIFICIAL LIGTH ISO 105 B02 > 5-6 SOLIDITY SWEAT ISO 105 E04 > 4 SOLIDITY WASHING ISO 105 C04 > 3 SOLIDITY GRAZE IN DRY ISO 105 X12 > 4 SOLIDITY WASHING IN DRY ISO 105 D01 > 3-4 TREATMENT WATER REPELLENT WR RISERS MAKING NAME COATS BONDED C.F.P. Nº OF REFERENCE V138 MATERIAL POLYESTER TYPE OF FINISH SILK BREAKING STRENGTH 9,5 KG ELONGATION 19% SYSTEMATIC CONTROL OF MAILLON QUICK-LINKS BEFORE EVERY FLIGHT 13
14 RISERS TECHNICAL DATA RISERS Nº OF REFERENCE G-R 22 MATERIAL POLYESTER WIDTH 22 M/M THICKNESS 1,52 M/M BREAKING STRENGTH 1,100 DAN ELONGATION MAX. 15% WEIGHT 25 G* L.M. COLOR BLACK COLOR INDICATOR Nº OF REFERENCE IC-G 1-2 MATERIAL POLYESTER WIDTH 70 M/M THICKNESS 0,80 M/M BREAKING STRENGTH 130 DN ELONGATION 35 % WEIGHT 32 G * L.M. COLOR GREEN LOOPS Nº OF REFERENCE LKI - 10 MATERIAL NYLON WIDTH 10 M/M BREAKING STRENGTH 84 KG ELONGATION 30 % WEIGHT 5,5 G/M COLOR WHITE 14
15 The importance of small details niviuk.com
TECHNICAL SPECIFICATIONS R-BUS
TECHNICAL SPECIFICATIONS R-BUS TECHNICAL DATA R-BUS 37 40 CELLS NUMBER 55 55 CLOSED 8 8 BOX 35 35 FLAT AREA m 2 37 40 SPAN m 14,14 14,7 ASPECT RATIO 5,4 5,4 PROJECTED AREA m 2 32,19 34,8 SPAN m 11,54 12
TECHNICAL SPECIFICATIONS ICEPEAK 7 PRO-MODEL
TECHNICAL SPECIFICATIONS ICEPEAK 7 PRO-MODEL TECHNICAL DATA ICEPEAK 7 PRO-MODEL 23 24 CELLS NUMBER 80 80 CLOSED 12 12 BOX 27 27 FLAT AREA M2 22,5 24 SPAM M 12,94 13,36 ASPECT RATIO 7,5 7,5 PROJECTED AREA
TECHNICAL SPECIFICATIONS TAKOO
TECHNICAL SPECIFICATIONS 1 TAKOO Technical data Description materials TAKOO 39 42 Cells Number 49 49 Closed 8 8 box 25 25 Flat area m2 39 42 span m 13,77 14,92 aspect ratio 5,3 5,3 Projected Area m2 33,61
Material differences between: Orca XX & Orca XX Cabrio
Service documents Material differences between: Orca XX & Orca XX Cabrio 06-2015 The latest version of service manual is available at: www.dudek.eu/en/service-and-inspections/ Full inspection is recommended
TECHNICAL DATA. Nucleon XX. Certification DGAC DGAC DGAC DGAC DGAC. Number of cells 20,00 22,00 24,00 26,00 28,00. Surface area (flat) [m 2 ]
![TECHNICAL DATA. Nucleon XX. Certification DGAC DGAC DGAC DGAC DGAC. Number of cells 20,00 22,00 24,00 26,00 28,00. Surface area (flat) [m 2 ]](/thumbs/94/119252744.jpg "TECHNICAL DATA. Nucleon XX. Certification DGAC DGAC DGAC DGAC DGAC. Number of cells 20,00 22,00 24,00 26,00 28,00. Surface area (flat) [m 2 ]")
18-01-2016 TECHNICAL DATA Nucleon XX Certification Number of cells Surface area (flat) [m 2 ] Surface area (projected) [m 2 ] Span (flat) [m] Span (projected) [m] Aspect Ratio (flat) Aspect Ratio (projected)
Nucleon WRC Cabrio 38 42
02-2018 The latest version of service manual is available at: www.dudek.eu/en/service-and-inspections/ Full Inspection is recommended every 24 months or every 150 hours whatever comes first, if not advised
Service documents
Service documents 10-2015 The latest version of service manual is available at: www.dudek.eu/en/service-and-inspections/ Full inspection is recommended every 24 months, if not advised otherwise by the
Service documents
Service documents 01-2019 The latest version of service manual is available at: www.dudek.eu/en/service-and-inspections/ Full Inspection is recommended every 24 months or every 150 hours whatever comes
Measurement request from test house for CCC certification From 28/09/2014 to next revision
Measurement request from test house for CCC certification From 28/09/2014 to next revision Brand Model Size Skywalk X-Alps2 S Test house name DHV Musterprüfstelle CCC certification n DHV GS-CCC-005-15
Canopy dimensions REPORT CCC 1
Canopy dimensions REPORT CCC 1 est report ref. number: CCC-018.2017 OZONE - ENZO 3 XS Name: Enzo 3 Place: Villeneuve Manufacturer name: Ozone Gliders Paragliders permitted in FAI Category 1 Cross-Country
Particularly captivating about this paraglider are its straightforward flight characteristics, fantastic gliding and subtle, well modulated handling.
Sportster is our high performance wing within class C. It has a aspect ratio of 6 and is designed for experienced and ambitious cross country pilots as well as pilots upgrading from class B. Particularly
Line Check Sheet for Paragliders
Line Check Sheet for Paragliders Glider Type: XB44 Makalu 4 SM (EN B) Rev. No.: 5 Date: 13.01.2016 Piece Check Line lengths [mm] R. Area No. A B C Left Right Left Right Left Right +1 +2 +1 +2 +1 +2 +1
EPSILON 7 MOTOR. User manual supplement Edition 2 / 11_2013
EPSILON 7 MOTOR User manual supplement Edition 2 / 11_2013 English The EPSILON 7 Paramotor In this supplement to the ADVANCE EPSILON 7 manual you will find everything you need to know for flying this
Dassault Aviation FALCON 7 X. for Jet CAT P160. Assembly Manual. AVIATION Design
Dassault Aviation FALCON 7 X for Jet CAT P160 Assembly Manual AVIATION Design ZI le chenet, 91490 Milly La Foret, FRANCE Tel : 33 1 64 98 93 93 Fax : 33 1 64 98 93 88 E-mail : aviation.design@wanadoo.fr
THEATER CURTAIN TRACK SYSTEMS
THEATER CURTAIN TRACK SYSTEMS Theater curtain track systems T 200 KOMBI profile T 300 OMEGA profile Application area: For horizontally moving heavy curtains For backdrops For fly systems For sliding doors
TOP DRIVE - HTD - CHD 3M - 5M - 8M - 14M APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL. Office-ATM machines
TOP DRIVE - HTD - CHD Performance index TOP DRIVE HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050. This profile has been used for many
BAVONA TP6100 SOFTTOP
VON SOFTTOP escription min. 200 cm max. 500 cm 0 min. 200 cm max. 600 cm Terrace pavilion consisting of a surrounding cubic frame profile (aluminium extruded profile dimension 230 x mm) and a folding awning
Level Probes multicap T DC 12 TE multicap T DC 11/16/21/26 TEN/TES
Technical Information TI 240F/00/en Level Probes multicap T DC 12 TE multicap T DC 11/16/21/26 TEN/TES Compact capacitive level probes (with European certificates). Fully and partially insulated rod and
XP 12 PLANS AND NOMENCLATURE
XP 12 PLANS AND NOMENCLATURE EDITION JANUARY 2002 Plans and Nomenclature XP 12 EDITION : JANUARY 2002 PAGE : 1 XP 12 - Nomenclature REP DESIGNATION QTY REF 1 SCREW CHC 6-30-10 4 B063210 2 SCREW CHC 6-35
SURE-SPRING SURE-SPRING, HP VERSION. ROLL-UP COVERS Special products. 18
SURE-SPRING The P.E.I. Patented design known as SURE-SPRING represent the most advanced level of technical innovation in the field of roll-up covers. (Patented) Suitable for HIGH SPEED operation The multiple
Your partner for the realisation of your ideas! Boards, block materials and cast blocks made of polyurethane for model-, tool- and mould making
Your partner for the realisation of your ideas! Boards, block materials and cast blocks made of polyurethane for model-, tool- and mould making Picture on front page: By kind permission of Werk5 GmbH,
System Level Applications and Requirements
Europe-Japan Symposium Electrical Technologies for the Aviation of the Future Tokyo, Japan 26 th and 27 th of March 2015 System Level Applications and Requirements Setting the Scene Johannes Stuhlberger
ToppTube PA11 (Polyamide) page 4. ToppTube PA12 (Polyamide) page 5. ToppTube PA12HIPHL (Polyamide) page 6. ToppTube PUR 98A (Polyurethane) page 7
ToppTube PA11 (Polyamide) page 4 ToppTube PA12 (Polyamide) page 5 ToppTube PA12HIPHL (Polyamide) page 6 ToppTube PUR 98A (Polyurethane) page 7 ToppTube PE-LD (Polyethylene) page 8 ToppTube PE-LLD (Polyethylene)
Trainer Assembly Manual
Trainer Assembly Manual www.pilot-rc.com -Pilot Trainer- 1 -Pilot Trainer- 2 -Pilot Trainer- 3 -Preliminary i wing & stab assembly- 1-) Locate both Plywood wing joiners (Large and small one) 2-) Insert
ORDER FORM Ver.9.0 Rev DEALER COLOURS INFORMATION For Office Use Only Dealer: Order Date: S/N: Account: P.O.#: RTS Ordered By: RTS: Phone:
C O L O U R S C H U M P - G ORDER FORM Ver.9.0 Rev-072513 DEALER COLOURS INFORMATION For Office Use Only Dealer: Order Date: S/N: Account: P.O.#: RTS Ordered By: RTS: Phone: Address: Email: City: State:
RECOMMENDED EDF AND BATTERY SET UP
SPECIFICATION - Wingspan: 1150mm (45.3 in) - Length: 1587mm (62.5 in) - Flying weight: 5.0-5.3 kg - Wing area: 40dm2 - Wing loading: 125g/dm2 - Wing type: Naca airfoils - Covering type: Genuine ORACOVER
PSI Anti-Corrosion Tape
General information Technical specifications Requirement evaluation Application instructions Certificates PSI Anti-Corrosion Tape 8 Pipeline Accessories 85 The Systems PSI anti-corrosion tapes have been
Catalog POWER TRANSMISSION BELT R TEK INTERNATIONAL. 214 Martin Dr, Wylie, Texas, 75098, USA
ADD: 214 MARTIN DR, WYLIE, TEXAS, 75098, USA TEL: +1 (817) 808 6335 FAX: +1 (817) 290 0537 EMAIL: info@rtekindustrial.com WEB: http://www. rtekindustrial.com 2009 2010 Catalog POWER TRANSMISSION BELT R
INDUSTRIAL HOSES - compensators
Working parameters of rubber expansion joints The parameters of rubber compensators given in the tables (, temperature and displacement) are the maximum values and they must not occur simultaneously. The
TORQUE HTD - CMT MUSTANG 8M - 14M SYNCHRONOUS BELT - CHD CMT APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL.
TORQUE HTD - CMT Performance index These heavy-duty synchronous belts are specifically designed for high torque applications at low speed. TORQUE belts are among the best performing HTD profiled belts
Ditec Alimax Rapid door for the food sector.
Ditec Alimax Rapid door for the food sector EN www.ditecentrematic.com Ditec Alimax is the most advanced evolution of the rapid door created to meet the specifications and strict cleanliness requirements
Electromagnetic flowmeters Series FLOMAT Insertion electromagnetic flowmeter for conductive liquids
Electromagnetic flowmeters Series FLOMAT Insertion electromagnetic flowmeter for conductive liquids For use in large diameter pipes as an economical solution for flow measurement Flow rate measurement
SIT Power Transmission, a history of passion and technology
SIT Power Transmission, a history of passion and technology SIT S.p.A., a core member of the Scaglia Group which was founded nearly 200 years ago in Bergamo Italy, has a 50 years history dedicated to manufacturing
ABN Quality Endorsed Company ISO9001 Lic No EDITION 2
ABN 43 8 71 335 SECTION 4 Cable Ladder and A U S T R A L I A W I D E A U S T R A L I A N M A D E Quality Endorsed Company ISO91 Lic No 13146 EDITION 2 SECTION 4: Cable Ladder & Type 3/5 Type 4/7L Type
LONG LENGTH DESIGN MANUAL CONTENTS PAGE. Introduction Long Length features & benefits... 2 Long Length belting programme... 7
DESIGN MANUAL LONG CONTENTS PAGE LENGTH Introduction Long Length features & benefits... 2 Long Length belting programme... 7 Drive Design Belt drive selection procedure... 8 Belt pitch selection guides...
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 500 Between flanges PN10-10 C for NBR seat ( -15 C for EPDM ) + 90 C for NBR seat ( + 110 C for EPDM ) Max Pressure : 10 Bars
atenea by Rafa Ortega 1 atenea
atenea by Rafa Ortega 1 atenea Atenea The ATENEA was designed by Rafa Ortega with one objective: to give a light, ergonomic and multi-functional chair that can be adapted and integrated to suit the functional
Guangzhou Stadium Project TRADITIONAL
ject Pro um i d a t ou S ngzh Gua Traditional Danpalon Multicell provides exceptional quality of light, a rich non-industrial visual appeal and delivers superior durability, thermal insulation and 99.9%
POWER TRANSMISSION BELT
ADD: 1614 WHIRLAWAY CT, ALLEN, TEXAS, 75002, USA TEL: (800) 810 6176 FAX: (817) 290 0537 EMAIL: sales@rtekindustrial.com WEB: www.rtekindustrial.com 2015-2016 Brochure POWER TRANSMISSION BELT R-TEK INTERNATIONAL
PROFLEX FLEXIBLE SPRINKLER HOSES (PAGE 1/5)
FLEXIBLE SPRINKLER HOSES (PAGE 1/5) DESCRIPTION A flexible sprinkler hose assembly consists of a braided or unbraided hose with on one side an inlet connection for the branch line, and on the other side
XP 17 PLANS AND NOMENCLATURE
XP 17 PLANS AND NOMENCLATURE SEPTEMBER 2000 EDITION Plans and Nomenclature XP 17 EDITION : SEPTEMBER 2000 PAGE : 1 XP 17 - NOMENCLATURE REP DESIGNATION QTY REF 1 SCREW CHC 6-30-10 4 B063210 2 SCREW CHC
Size : Ends : Min Temperature : Max Temperature : Materials : Stainless steel ASTM A351 CF8M. Certificate 3.1
Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 mm Flanges R.F. PN40-30 C + 220 C Max Pressure : 40 Bars Specifications : Antistatic device ISO 5211 mounting pad Anti blow-out stem Fully
AFA TS GmbH - Werner von Siemens Str.3 - D Grafenberg Copyright 2009 Tel.: +49(0) Fax: +49(0)
AFA TS GmbH - Werner von Siemens Str.3 - D-72661 Grafenberg Copyright 2009 Tel.: +49(0)7123-97382-0 - Fax: +49(0)7123-97382-90 - E-Mail: mail@afa-ts.de Page 1-15 www.afa-ts.com Exhaust Extraction Systems
RECOMMENDED MOTOR AND BATTERY SET UP
SPECIFICATION - Wingspan: 6000mm (236.2 in) - Length: 2873mm (113.1 in) - Flying weight: 14-18 kg - Wing area: 219.4 dm2 - Wing loading: 64g/dm2 - Wing type: HQ airfoils - Covering type: Genuine ORACOVER
I n s t r u c t i o n M a n u a l. Instruction Manual SPECIFICATION
I n s t r u c t i o n M a n u a l Instruction Manual SPECIFICATION - Wingspan: 3200mm (125,9 in) - Length: 1650mm (64,9 in) - Flying weight: 3000gr 3200gr - Wing area: 64.5 dm2 - Wing loading: 46g/dm2
Product range Power transmission belts
Product range Power transmission belts flat belts Siegling total belting solutions 2 Siegling Extremultus exceptional power transmission Contents We have developed the Siegling Extremultus power transmission
CONTI ALLCRETE WIRE High quality hoses for high pressure concrete lines
CONTI ALLCRETE WIRE High quality hoses for high pressure concrete lines CONTI ALLCRETE WIRE is the perfect hose for the use in concrete and soild pumps. With its extruded smooth bore tube, made of highly
VALSIR SUPPLY SYSTEMS MIXAL
TECHNICAL DATA SHEET VALSIR SUPPLY SYSTEMS MIXAL The product Mixal is an extremely flexible multilayer pipe and is therefore ideal for the creation of floor, wall and ceiling radiant heating and cooling
2MHP 3MHP 5MHP 8MHP 14MHP D8MHP
Profiles: t h t h s 2MHP, 3MHP, 5MHP, 8MHP, 14MHP optibelt OMEGA HP W T Profile: D8MHP HIGH PERFORMANCE TIMING BELT MADE OF CHLOROPRENE maintenance-free, with glass-fibre tension cord 2MHP 3MHP 5MHP 8MHP
Controlable elements Quantity Type of servo
Controlable elements Quantity Type of servo Elevator 1 HS-5645 MG digi Rudder 1 HS-645 MG Ailerons 2 HS-5125 MG digi Flaps 2 HS-5125 MG digi Airbrakes 2 HS-125 MG Landing gear 1 HS 7955 TG Brake of landing
Product catalogue. Mechanical accessories for pumps and mixers
Product catalogue Mechanical accessories for pumps and mixers Contents Mixer accessories Single guide bar system...4 Double/tripod guide bar system...9 Cantilever system...14 Bottom fixing plate system...15
the leading edge of the wing, at the fuselage - Length: 1540mm (60.6 in) 10% expo; High: 15mm up/down, 10% expo - Wing area: 40dm2
SPECIFICATION - Gravity CG: 165-170 mm (6.5-6.7 in) Back from - Wingspan: 1400mm (55.1 in) the leading edge of the wing, at the fuselage - Length: 1540mm (60.6 in) - Control throw Ailerons: Low: 12mm up/down,
ROSTA MOTORBASES ROSTA. Self-Tensioning Motor Mount for Belt Drives. without slippage self-adjusting maintenance-free
MOTORBASES Self-Tensioning Motor Mount for Belt Drives without slippage self-adjusting maintenance-free Technology Tensioning Motorbase Type MB for Belt Drives The elastic tensioning motorbase type MB,
atika 1 atika
atika 1 atika atika 2 3 atika Atika The ATIKA mesh is available in 12 different colours and has a power mesh that gives the best possible finish. It meets the aesthetic requirements of our clients and
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional full flanged valve equipped with two metal reinforced rubber sleeves designed for use in the handling of abrasive slurries, mainly
Industrial Catalogue E2/80001
Industrial Catalogue E2/80001 TEXROPE Industrial Catalogue TEXROPE is synonymous with a complete range of industrial belts including classical belts, narrow-section belts, double-v belts, multi-ribbed
F9F-2 OPERATIONAL MANUAL
F9F-2 OPERATIONAL MANUAL 7 different color to meet customer s choice. 2 different material F9F-2/OB: F9F-2/TB: F9F-2/YB: F9F-2/WR: F9F-2/GYR: F9F-2/GRW: F9F-2/BRY: Original Blue Tail Blue Yellow/Blue White/Red
European standard. Safety instructions. Informations stipulated TAGS PRESENT ON ANY WEBBING. Lifting slings
European standard (Extract of European Standards NF EN 1492-1 and 2) This European standard specifies the application fields for all textile lifting equipment and accessories, as well as their manufacturing
Composition Fibreglass 34% - PVC 48% - PVC laminate 18% By heat, high frequency or ultrasonic welding
Serge 600 Blockout Solar - charcoal charcoal Technical info FRONT BACK Widths 300 cm Composition Fibreglass 34% - PVC 48% - PVC laminate 18% Openness factor NBN EN 410 3.00% Weight NF EN 12127 650.00 g/m²
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional full flanged valve equipped with two metal reinforced rubber sleeves designed for use in the handling of abrasive slurries, mainly
PRODUCE EVOLUTION. Be careful, our valves Ref are changing
ATEX DIN M3 PRODUCE EVOLUTION Be careful, our valves Ref.704-706 are changing We currently have 2 different types available (according to DN) with different dimensions and ATEX certification for the new
HTD - Timing Belt Drives. Mustang Speed Mustang Torque
HTD - Timing Belt Drives Mustang Speed Mustang Torque SIT Timing Belt Drives SIT Timing belts are modern drive elements made of high-quality materials and produced according to the latest manufacturing
DN 1/2" to 4" Female BSP + 0 C + 65 C Max Pressure : 16 Bars ( up to DN 1 ) Specifications : All positions Stainless steel strainer Nylon throttle
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 4" Female BSP + 0 C + 65 C Max Pressure : 16 Bars ( up to DN 1 ) Specifications : All positions Stainless steel strainer Nylon throttle Materials
I/C FLIGHT GUIDELINES
SPECIFICATION - Wingspan: 3500mm (137.8 in) - Length: 1650mm (64.96 in) - Flying weight: 3700-4000 gr - Wing area: 75 dm2 - Wing loading: 49g/dm2 - Wing type: HQ profile - Covering type: Genuine ORACOVER
FLANGED FULL BORE MBV BALL VALVE, SERIES M1 FOR PN RATINGS
FLANGED FULL BORE MBV BALL VALVE, SERIES M1 FOR PN RATINGS 1 M1 20 Issue 4/99 DESIGN FEATURES Size range DN... 300. For larger sizes, DN 350-400, select series MP, MA, or MT. PN 10, 16, and 40. Pressure
Marine fendering. for quality rubber protection
Marine fendering for quality rubber protection TABLE OF CONTENTS Marine fendering 4 W fenders 43 5 M fenders 47 Made to order 6 51 7 55 Repair market 9 58 D fenders 11 Wing fenders 60 Delta fenders 19
STEP 1 - APPLYING HINGE BEVELS TO FRONT WING, REAR WING, VERTICAL STABILIZER, AND RUDDER FRONT WING (UNDERSIDE) 45 DOUBLE HINGE BEVEL
SkyRaiderv.b WING SPAN: FRONT - 22 in. REAR - 28.5 in. LENGTH: 35.25" WING AREA: 381 sqin. WEIGHT: 19-20oz. (RECOMMENDED) POWER: HACKER A20-20L, 10x3.8 APC PROP, 3S1P 1320mah Lipo 15C, 20A ESC RADIO: 4
PRODUCT EVOLUTION. Be careful, our valves Ref.705 are changing
ATEX DIN M3 PRODUCT EVOLUTION Be careful, our valves Ref.705 are changing We currently have 2 different types available (according to DN) with different dimensions and ATEX certification for the new type
MADE OF STAINLESS... Certificate 3.1
MADE OF STAINLESS... Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 800 Between flanges PN10-10 C for NBR seat ( -15 C for ) + 90 C for NBR seat ( + 110 C for ) Max Pressure
JSC SPORTINĖ AVIACIJA Page 1
JSC SPORTINĖ AVIACIJA Page 1 R JSC SPORTINĖ AVIACIJA Page 2 e c o r d o f r e v i s i o n s R e v i s i o n N o. D a t e A f f e c t e d p a g e s R e v i s e d S e c t i o n N o. JSC SPORTINĖ AVIACIJA
Theory of Flight. Main Teaching Points. Definition Parts of an Airplane Aircraft Construction Landing Gear Standard Terminology
Theory of Flight 6.01 Aircraft Design and Construction References: FTGU pages 9-14, 27 Main Teaching Points Parts of an Airplane Aircraft Construction Standard Terminology Definition The airplane is defined
I.T TMY-B* series 11 TURN-MILL TURRET WITH Y-AXIS (PATENTED) TECHNICAL INFORMATION ISSUED
TMY-B series 11 TURN-MILL TURRET WITH Y-AXIS (PATENTED) TECHNICAL INFORMATION I.T. 6471 GB The data given in the I.T. are subject to technical modifications without notice. ISSUED 03-09 / series 11 MAIN
HYUNDAI TUCSON 2016ON
Our ref: H0660 HYUNDAI TUCSON 2016ON PACKAGING REQUIREMENTS. BOOTLINER 4x tabs 2 x 250mm x 30mm wide 2 x 280mm x 30mm wide 2 x 900mm x 30mm wide TAILGATE COVER 20 x tabs self-adhesive loop Photo shows
BI-DIRECTIONAL KNIFE GATE VALVE
BI-DIRECTIONAL KNIFE GATE VALVE The model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on suspended
KISS 450 PLANS AND NOMENCLATURE
KISS 450 PLANS AND NOMENCLATURE AUGUST 2000 EDITION Plans and Nomenclature KISS 450 EDITION : AUGUST 2000 PAGE : 1 KISS 450 - NOMENCLATURE REP DESIGNATION QTY REF 1 SCREW CHC 6-30-10 4 B063210 2 SCREW
index Megadyne PV-belts 2 Belt features and structure 3 Belt cross sections and dimensions 4 Pulleys 5 Standard belt range 6 Symbols, units, terms 8
pv-belts index Megadyne PV-belts 2 Belt features and structure 3 Belt cross sections and dimensions 4 Pulleys 5 Standard belt range 6 Symbols, units, terms 8 Drive calculation procedure 9 Table 8: performance
SNS SUBJECT: RADOME IPS FLUID SYSTEM - Radome IPS Routing
CIRRUS SF5X Service Bulletin Number: Issued: SNS SUBJECT: 0-50 - RADOME IPS FLUID SYSTEM - Radome IPS Routing. COMPLIANCE Mandatory: Cirrus considers this Service Bulletin to be MANDATORY. Accomplish this
Certification: Classification: IP20
2.5 SQURE ED ETURES: Construction: Each separate unit is made from an extruded aluminum body with anodized or white powder coat. silver grey or white powder coat connector plate at each end allows easy
Materials : Cast iron or Stainless steel
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 800 Between flanges PN10-10 C for NBR seat ( -15 C for EPDM ) + 90 C for NBR seat ( + 110 C for EPDM ) Max Pressure : 10 Bars
Richmond Olympic Oval Canada
ou ngzh Gua Stadiums ct roje mp u i d Sta Suzhou City Stadium China Laoshan Velodrome China Richmond Olympic Oval Canada STADIUMs Danpalon Multicell provides exceptional quality of light, a rich non-industrial
CLASSICA Imperial pitch - CD MXL - XL - L - H - XH SYNCHRONOUS BELT - - CHD CD APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL.
CLASSICA Imperial pitch - CD Performance index The CLASSICA synchronous belt, being designed with imperial pitch, is a valid and economical alternative solution in low/medium torque transmission systems.
DN 1/4 to 4 Threaded BSP or NPT - 20 C C Max Pressure : 63 Bars ( up to DN 3/4" ) Specifications : Anti blow-out stem Locking device Full bore
Size : Ends : Min Temperature : Max Temperature : DN 1/4 to 4 Threaded BSP or NPT - 20 C + 180 C Max Pressure : 63 Bars ( up to DN 3/4" ) Specifications : Anti blow-out stem Locking device Full bore Materials
Technical Sheet: Fairchild Dornier Alpha-Jet
Phone: 408/738-3959 Toll Free (U.S.): 800/777-6405 Fax: 408/738-2729 Email: bruce@aircraftcovers.com BRUCE'S CUSTOM COVERS 18850 Adams Ct Morgan Hill, CA 95037 www.aircraftcovers.com a div. of Aircraft
Technical Sheet: Cessna 140
18850 Adams Ct Morgan Hill, CA 95037 www.aircraftcovers.com Phone: 408/738-3959 Toll Free (U.S.): 800/777-6405 Fax: 408/738-2729 Email: bruce@aircraftcovers.com manufacturer of the finest custom-made aircraft
MARINE FENDERS ISO EDITION FLOATING FENDERS SYSTEM FENDERS FIXED FENDERS ROPES & RIGGING SERVICE. noreqfender.no
ISO 17357 MARINE FENDERS 2016 EDITION NPF3365CTN delivered to Haugesund Port summer 2015 FLOATING FENDERS ROPES & RIGGING SYSTEM FENDERS FIXED FENDERS SERVICE Fender davits Ropes, wire, hardware Quay and
Instruction Manual. Wingspan : 2270mm (89.37 inches) : 1870mm (73.62 inches) : 7400gr gr. : 4 channel - 6 standard servo.
Wingspan : 2270mm (89.37 inches) g Length : 1870mm (73.62 inches) Weight : 7400gr - 7600gr Radio : 4 channel - 6 standard servo Engine : 25cc-35cc KIT CONTENTS: We have organized the parts as they come
PRODUCT EVOLUTION. Be careful, our valves Ref.702 are changing
PRODUCT EVOLUTION Be careful, our valves Ref.702 are changing We currently have 2 different types available (according to DN) with different dimension and non-commutable gaskets Old marking : New marking
TABLE OF CONTENTS CHAPTER 1, INTRODUCTION... 4 CHAPTER 2, DESCRIPTION... 4 CHAPTER 3, NORMAL PROCEDURES. 4 CHAPTER 4, EMERGENCY PROCEDURES.
Van Horn Aviation, L.L.C. TABLE OF CONTENTS TITLE PAGE NO. CHAPTER 1, INTRODUCTION... 4 CHAPTER 2, DESCRIPTION... 4 CHAPTER 3, NORMAL PROCEDURES. 4 CHAPTER 4, EMERGENCY PROCEDURES. 5 CHAPTER 5, AVIONICS....
IMPAGINATO_2006.qxd :57 Pagina 1 PRODUCTS GUIDE
IMPAGINATO_06.qxd 22-11-06 11:57 Pagina 1 PRODUCTS GUIDE IMPAGINATO_06.qxd 22-11-06 11:57 Pagina 1 PRODUCTS GUIDE IMPAGINATO_06.qxd 22-11-06 11:57 Pagina 2 Megadyne is one of the highest quality belt manufacturers
Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 200 Flanged GN10/16-10 C + 100 C Max Pressure : 16 Bars Specifications : Full bore Stainless steel ball Iso 5211mounting pad Materials : Cast
Curtains. Motors & Accessories. Motor Selection Chart...2. Glydea 35 DCT & Glydea 35 WT Glydea 60e DCT & Glydea 60e WT RTS...
Curtains Motors & Accessories Motor Selection Chart...2 Glydea 5 DCT & Glydea 5 WT... Glydea 60e DCT & Glydea 60e WT... 4 Technical Characteristics & Features: Glydea 5 DCT & Glydea 5 WT... 56 Glydea 60e
Materials : Stainless steel ASTM A351 CF8M
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : Max Pressure : 40 Bars Specifications : Spring type All positions Metal / metal DN 15 to DN200 Between flanges PN10/16/25/40 and Class
PRODUCTS HOT ROLLED REINFORCING BARS WIDE ROD BILLET FROM CONTINUOUS CASTING WELDED WIRE MESH
PRODUCTS HOT ROLLED REINFORCING BARS WIDE ROD BILLET FROM CONTINUOUS CASTING WELDED WIRE MESH INDEX 01. HOT ROLLED REINFORCING BARS PAGE 4 02. WIRE ROD PAGE 6 03. BILLET FROM CONTINUOUS CASTING PAGE 8
Stainless steel ASTM A351 CF8M
MADE OF STAINLESS... Certificate 3.1 Size : Connection end : Min Temperature : Max Temperature : DN 25 to 150 Flanges PN16 R.F. - 30 C + 150 C Max Pressure : 16 Bars Specifications : ISO mounting pad filled
Table of Contents 2.0 COOLFLEX CLX. 2.0 Table of Contents
Table of Contents CLX 2.0 2.0 Table of Contents 2.1 System description 2.100 System description (general) 2.105 System description (data) 2.115 range, DN 20 - DN 125 / SDR 11 (coils) 2.2 Planning, design
Materials : Cast iron body EN GJL-250
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 600 Flanges R.F. PN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN 200 ( 10 bars over ) Specifications : Removable stainless
Chapter 27. Flight Controls
Chapter 27 Flight Controls PAGE 1 Chapter 27 Table of Contents Chapter Title 27-00-00 GENERAL.................................. 3 27-00-01 Control Rods................................. 6 27-00-02 Bellcranks...................................
DN 3/8" Male, free nut BSP 0 C + 90 C Max Pressure : 10 Bars Specifications : For flush tank
ISO 9001-2008 Size : Ends : Min Temperature : Max Temperature : DN 3/8" Male, free nut BSP 0 C + 90 C Max Pressure : 10 Bars Specifications : For flush tank Materials : Brass Page 1 sur 10 SPECIFICATIONS
TEAM AND ATHLETIC. Proudly Canadian owned and managed company serving Canadians
TEM ND THLETIC Proudly Canadian owned and managed company serving Canadians V 01 Victory PERFORMNCE THLETIC TWILL TRCK JCKET 100% polyester twill outer shell. Mesh lined body and lined sleeves. Contrast
V-BELTS Rubber V-belts
V-BELTS Rubber V-belts INDEX Introduction to V-belts 3 Product range 6 Technical calculation 7 Belt selection charts 10 Calculation example 12 Belt tensioning 13 Length measuring and groove pulleys 14