SV TYPE SV1/SV2. part number structure example H-8. rollers. number of rollers. stroke diameter. part number 1.5

SM 3 SM 3G SMS 3 SMS 3G

SM TYPE Standard Type This type is a metric dimension series widely used in Japan and other countries. part number structure example SMS 2 G UU - P specification SM standard SMS anticorrosion inner contact

E-1 SLIDE GUIDE ROTARY BALL SPLINE BALL SPLINE TOPBALL PRODUCTS SLIDE BUSH SLIDE UNIT SLIDEROTARYBUSH STROKE BUSH SLIDE SHAFT SLIDE TABLE GONIO WAY

SLIDE GUIDE BALL SPLINE ROTARY BALL SPLINE TOPBALL PRODUCTS SLIDE BUSH SLIDE UNIT STROKE BUSH SLIDEROTARYBUSH SLIDE SHAFT SLIDE WAY SLIDE TABLE GONIO WAY E-1 ACTUATOR SLIDE SCREW Table E-1 A wide variety

SSP TYPE. Toll Free: Fax: Cylindrical Spline Nut. 777 Schwab Road, Suite T, Hatfield, PA part number structure

SSP TYPE Cylindrical Spline Nut structure example SSP 8-2 - T1 - - P / CU SSP type nut length blank standard long number of nuts attached to one shaft with special specification accuracy grade blank high

SSP TYPE. Cylindrical Spline Nut. part number structure B-16. When two spline nuts are used in close contact. major dimensions part number

SSP TYPE Cylindrical Spline Nut structure example SSP 8 - - T1 - - P / CU SSP type nut length blank standard long number of nuts attached to one shaft with special specification accuracy grade blank high

SWF TYPE. Round Flange Type. part number structure example SWSF 16 G UU. This type is an inch dimension series mainly used in the U.S.

SWF TYPE Round Flange Type This type is an dimension series mainly used in the U.S. part number structure example SWSF 16 G UU - SK specification SWF standard SWSF anticorrosion inner contact diameter

GM (single type) GM-W (double-wide type) GMF-W (round flange double-wide type)

Nippon Bearing has expanded the new generation GM Slide Bush series to now include the popular ouble-ide and Flange Types to provide an even wider selection of products. GM (single type) GM- (double-wide

LINEAR ACTUATOR INDUSTRIAL DUTY 10B SERIES

Product Data Sheet LINEAR ACTUATOR Standard Features: All steel frame with stainless steel extension tube o Aluminum gearbox housing Nominal stroke lengths: 4 [102mm], 6 [153mm], 8 [203mm], 12 [305mm],

SAMICK LINEAR BUSHING

Linear Bushing SAMICK LINEAR BUSHING SAMICK Linear Bushing, LM type is the linear motion system with unlimited stroke by applying with LM shaft. Because of the point contact between Balls and LM shaft,

Model DFRP Rotary Actuator

Features Rugged Long Lasting Construction Dyna-Flo s expert CNC machining process and superior quality parts come together to make DFRP actuators a rugged, long lasting product. DFRP actuators are manufactured

LINEAR ACTUATOR INDUSTRIAL DUTY LACT BALL SCREW DRIVE

Product Data Sheet LINEAR ACTUATOR Standard Features: All steel frame with stainless steel extension tube o Aluminum gearbox housing Nominal stroke lengths: 4 [102mm], 6 [152mm], 8 [203mm], 12 [305mm],

R. S. Impex. https://www.indiamart.com/r-s-impex/

+91-8048602491 R. S. Impex https://www.indiamart.com/r-s-impex/ We R.S. Impex are one of the leading Importers / dealers since two decades of many reputed brand accessories & spares for various machinery.

LINEAR ACTUATOR INDUSTRIAL DUTY 10A SERIES

Product Data Sheet LINEAR ACTUATOR Standard Features: All steel frame and extension tube o Aluminum gearbox housing Nominal stroke lengths: 4 [102mm], 6 [153mm], 8 [203mm], 12 [305mm], 18 [457mm], 24 [610mm],

SP24-09A Dynamic load capacity 09A4 - = 25 lbf 17A8 - = 75 lbf. 2. Dynamic load capacity 09A4 - = 25 lbf 17A8 - = 75 lbf

Ordering Keys Electrak DC-actuators Electrak 3 S4-09A4-06 S - = Electrak, Vdc S4 - = Electrak, 4 Vdc 09A4 - = 5 lbf 7A8 - = 75 lbf 0 = inch Electrak SP 3 SP4-09A4-06 SP - = Electrak SP, Vdc SP4 - = Electrak

RoHS Directive-Compliant Motorized Linear Slides EZS Series for Clean Room Use. Features

Motorized Actuators RoHS Directive-Compliant Series for Clean Room Use The Series for Clean Room Use is a product designed with the same level of function and performance as the Series but is ideal for

Single direction thrust ball bearings Double direction thrust ball bearings

Thrust ball bearings Single direction thrust ball bearings... 838 Double direction thrust ball bearings... 839 Bearing data general... 840 Dimensions... 840 Tolerances... 840 Misalignment... 840 Cages...

LINEAR ACTUATOR INDUSTRIAL DUTY LACT ACME DRIVE SERIES

Product Data Sheet LINEAR ACTUATOR Standard Features: All steel frame and extension tube o Aluminum gearbox housing Nominal stroke lengths: 4 [102mm], 6 [152mm], 8 [203mm], 12 [305mm], 18 [457mm], 24 [610mm],

Linear actuators ATL Series

. TECHNICAL DATA - acme screw linear actuators ATL Series ATL 63 ATL 80 ATL 100 ATL 15 SIZE 50 60 90 100 150 Push rod diameter [mm] 70 90 115 150 00 Outer tube diameter [mm] 30 35 40 60 80 Front attachment

BALL SPLINE ROTARY BALL SPLINE STROKE BALL SPLINE BALL SCREW SPLINE

ROTARY STROKE BALL SCREW SPLINE STRUCTURE AND ADVANTAGES B- TYPES B- ACCURACY B- PRELOAD AND CLEARANCE IN ROTATIONAL DIRECTION B- STRENGTH OF SPLINE SHAFT B- LOAD RATING B- CALCULATION OF DEFLECTION AND

LINEAR ACTUATOR INDUSTRIAL DUTY 10A SERIES

Product Data Sheet LINEAR ACTUATOR Standard Features: All steel frame and extension tube o Aluminum gearbox housing Nominal stroke lengths: 4 [102mm], 6 [153mm], 8 [203mm], 12 [305mm], 18 [457mm], 24 [610mm],

Contents. Index. Content

s MS motor - Range... 2 MS motor - Torque module... 3 MS motor - Valving cover... 4 MS motor - Multidisc brake... 5 MS motor - Bearing support... 6 MS motor - Drum brake... 7 Forklift truck drive axle...

Round Fine Centering for the mold construction. The development. Advantages

Round Fine Centering for the mold construction The development Advantages Durability: for mass production Backlash-free for very precise mold alignment Shorter cycle times High initial load capacity at

High Power. EZA Series. High Thrust Force. Large Transportable Mass. Motorized Cylinders. Features

Motorized Cylinders For details on this product please refer to our website, contact technical support or your nearest Oriental Motor sales office. These motorized cylinders have a built-in LM guide. Greater

F-1 SLIDE GUIDE STROKE BALL SPLINE ROTARY BALL SPLINE BALL SPLINE TOPBALL PRODUCTS SLIDE BUSH SLIDE UNIT SLIDE ROTARY BUSH STROKE BUSH SLIDE SHAFT

SLIDE GUIDE BALL SPLIE ROTARY BALL SPLIE STROKE BALL SPLIE TOPBALL PRODUTS SLIDE BUSH SLIDE UIT SLIDE WAY/GOIO WAY MIIATURE SLIDE F- ATUATOR SLIDE SREW The B stroke bush is a linear and rotational motion

RSR. LM Guide Miniature Types Model RSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use

LM Guide Miniature Types Model Endplate LM block End seal LM rail Ball Grease nipple Cross section Point of Selection A Point of Design Options Model No. Precautions on Use Accessories for Lubrication

Linear actuators ILA Series

Linear Actuator ILA Series without input drive, with flange and input shaft Linear Actuator ILA Series with input drive - with 2 bevel gearmotors - with single bevel gearmotor - with helical coaxial or

STROKE BUSH SLIDE ROTARY BUSH STROKE BUSH

STROKE BUSH STROKE BUSH STRUCTURE AN AVANTAGES E- AOWABE SPEE FOR COMBINE ROTATION AN STROKE MOTION E- RATE OA AN RATE IFE E- FIT E- USE AN HANING PRECAUTIONS E- IMENSION TABE E- SRE SERIES STRUCTURE AN

PERFORMANCE with: Duty Cycle Fi = 100 % over 10 min. at 25 C environment

5.1 BALL SCREW LINEAR ACTUATOR BSA 10 Compact ball screw linear actuator with integral electric motor suitable for push and pull motions. Rolled and hardened ball screw. Case hardened and ground ball nut.

Technical News Bulletin

Technical News Bulletin Cham, October 2006 Baffle Mechanism IS 5 ½ & 6 ¼ and AIS 1. System Description The Emhart Glass Baffle Mechanism is the product of extensive research and development and exhibits

Model DFR Valve Actuator

FEATURES Reliable Design The low-pressure diaphragm, fail-safe spring, and splined connection make for accurate and safe operation. Rugged Long Lasting Construction Dyna-Flo s expert CNC machining process

Index INDEX. Product overview Technical data... 5 RHL Sliders for RHL80: V100, V250 & V RHL

LINEAR UNIT RHL Svanemærket tryksag 541-713 INDEX Index Product overview... 4 Technical data... 5 RHL... 6 Sliders for RHL: V1, V25 & V5... 7 RHL11... 8 Sliders for RHL11: V2 & V5... 9 Mounting Plates...

Linear actuators ATL Series

. TECHNICAL DATA - acme screw linear actuators ATL Series SIZE ATL 0 ATL 5 ATL 8 ATL 30 ATL 40 Push rod diameter [mm] 5 30 30 35 40 Outer tube diameter [mm] 36 45 45 55 60 Front attachment diameter [mm]

SERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion.

1.1 SERVOMECH LINEAR ACTUATORS SERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion. Developed and manufactured for industrial applications,

Technical News Bulletin

Technical News Bulletin Cham, October 2006 Funnel Mechanism for IS 5 ½, IS 6 1/4 and AIS 1. System Description The Emhart Glass Funnel Mechanism for center distances DG 51/2, DG 61/4 and TG 41/4 has been

Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79

Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 71-74 Technical Data 75-78 Dimensions 79 71 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS

Contents. Index. Content

s MS MOTOR [MS MOT] - Range... 2 MS MOTOR [MS MOT] - TORQUE MODULE [TORQ MODULE]... 3 MS MOTOR [MS MOT] - Valving cover... 4 MS MOTOR [MS MOT] - Multidisc brake... 5 MS MOTOR [MS MOT] - BEARING SUPPORT

Type CH Hydraulic Elements

Type CH Hydraulic Elements Element Description Type CH Type CH elements are designed specifically for heavy duty clutch and brake applications. They can be air or hydraulically actuated. The friction disc

PROGRAM-VERSIONING. Revision number: - Increase of the number at extensive program change - The program is no longer backward compatible

LINEAR MOTION DESIGNER Release Notes PROGRAM-VERSIONING LMD 3.0.1224 Revision number Supporting version number Main version number Name of program Main version number: - Increase of the number at extensive

SERIES PA SWING ARM CLAMPS for the Automotive Industry

Pa SERIES PA SWING ARM CLAMPS for the Automotive Industry Ideal for a wide variety of automated part holding and transfer applications Copper Arm Switches Installed ORDERING DATA: SERIES PA CLAMPS INDEX:

PNEUMATIC SLIDES (SERIES ZA)

ZA PNEUMATIC SLIDES (SERIES ZA) Bore 2x6, 2x8, 2x12, 2x16 or 2x20 mm. Stroke from 10 mm to 150mm. Optional end of stroke adjustments using shock absorbers, rubber bumpers, (FGD) or grub screw, (FPD). Optional

Advanced "Positioning" is in your hand.

AZ Series Equipped Motorized Linear Slides Motorized Cylinders EAC Series / AZ Series Equipped Motorized Linear Slides Motorized Cylinders EAC Series / Lineup Added Battery-free Absolute Sensor Equipped

TECHNICAL INFORMATION

General Nomenclature Spherical Roller Bearings The spherical roller bearing is a combination radial and thrust bearing designed for taking misalignment under load When loads are heavy, alignment of housings

R5 - CLUTCH COUPLING Page 13

R5 - CLUTCH COUPLING Page 13 FLYING WHEEL GEAR FLYING WHEEL FOR 5 GORDINI Ø 180 MM MP1565 22.95 R5 ALPINE R1223 Clutch kit Ø181mm ( drive plate + cover + bearing ) MP1503 118.00 Drive plate Ø181mm ( 20

LINEAR ACTUATOR INDUSTRIAL DUTY LACT SERIES

Product Data Sheet Standard Features: All steel frame and extension tube o Aluminum gearbox housing o Ball screw version has stainless steel extension tube Nominal stroke lengths: 4 [102mm], 6 [152mm],

Precision Modules PSK

Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum

...components in motion. Easy Rail

...components in motion Easy Rail Easy Rail Introduction The Easy Rail family have a compact cross-section and low-friction movement. Robust and Long Service Life Easy Rail s range of cross-sectional rail

Angular contact thrust ball bearings

Angular contact thrust ball bearings Angular contact thrust ball bearings, single direction, Ry type and angular contact thrust ball bearings, double direction, 2344 and 2347 types, have a large contact

Globe type control valve

Basically a globe type of control valve consists of two parts as follows: Main (globe) valve body Diaphragm type of pneumatic actuator This two valve s part is coupled by a special coupling when the air

www.motiontech.com.au Copyright SERVOMECH This catalogue contents are under publisher copyright and may not be reproduced unless permission is agreed. Every care has been taken to ensure the accuracy of

*複合型/B _*複合型/B /05/25 10:10 ページ 151 Complex Bearings

Complex Bearings Complex bearings Complex Bearings complex bearing is comprised of a needle roller bearing of supporting radial load and a thrust bearing for supporting axial load which are assembled integrally.

TELESCOPIC RAIL HEAVY

TELESCOPIC RAIL HEAVY Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right

Sealed Spherical Roller Bearings [WA Type]

Sealed Spherical Roller Bearings [WA Type] Note: Markings on the seal are not white in actual bearings. CAT. No. -@/E Up to five times longer service life Sealed Spherical Roller BearingsWA Type ULTAGE

Mechanically actuated valves

Mechanically actuated valves 3/2-5/2 spool valves with 1/8-1/4" NPT threaded ports BSP version avaiable on request Installation in any position Comprehensive range of actuations, direct or servo-piloted

Servomech 1.4 BALL SCREW LINEAR ACTUATORS Series BSA

1.4 BALL SCREW LINEAR ACTUATORS Series BSA Technical features table SIZE FEATURES BSA 10 BSA 20 BSA 25 BSA 30 BSA 40 Rod diameter [mm] 25 25 30 35 40 Protective tube diameter [mm] 36 36 45 55 60 Motor

DURA-TRANS NB-SERIES. Bi-Directional Transfer NB-10 NB-20 TECHNICAL SPECIFICATION OPERATING PRINCIPLES 6-1.1

NB-SERIES NB Series of Bidirectional Transfer Devices, commonly known as tuckers, provide a practical low-cost method for automatic work positioning. The units are extremely compact and eliminate the need

www.sullivanandsons.com Engineering Services Sullivan and Sons, Inc., offers a wide range of engineering services. Our expertise can help you through each stage, including conception, design, construction,

Servomech 1.4 BALL SCREW LINEAR ACTUATORS Series BSA

1.4 BALL SCREW LINEAR ACTUATORS Series BSA Technical features table SIZE FEATURES BSA 10 BSA 20 BSA 25 BSA 30 BSA 40 Rod diameter [mm] 25 25 30 35 40 Protective tube diameter [mm] 36 36 45 55 60 Motor

A5 BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK

BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK Belt-driven rodless electric axis with a V-Lock interface. The structure features an extremely lightweight yet high-strength anodised aluminium extruded

Precision Modules PSK. The Drive & Control Company

Precision Modules PSK The Drive & Control Company 2 Bosch Rexroth Coporation Precision Modules PSK R310A 2414 (2008.07) Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear

Servomech 1.4 BALL SCREW LINEAR ACTUATORS Series BSA

1.4 BALL SCREW LINEAR ACTUATORS Series BSA Technical features table SIZE FEATURES BSA 10 BSA 20 BSA 25 BSA 30 BSA 40 Rod diameter [mm] 25 25 30 35 40 Protective tube diameter [mm] 36 36 45 55 60 Motor

10 Thrust ball bearings

Rolling bearings 10 Thrust ball bearings Designs and variants... 1010 Single direction thrust ball bearings... 1010 Double direction thrust ball bearings.. 1010 Cages... 1010 Bearings with sphered housing

Sizes 50, 65, 80. Presence of internal channels for re-lubrication Large range of axis mounting accessories

> Series 5E electromechanical axis C_Electrics > 207 Series 5E electromechanical axis New models Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high

Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89

Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 79-82 Technical Data 83-88 Dimensions 89 79 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS

Linear Shafting. Motion Control Products For Industrial Automation. Contact us at: PH: (330) FAX: (330)

Linear Shaftin Motion Control Products For Industrial Automation Contact us at: PH: (33) 847 7 FAX: (33) 847 528 www.eshaft.com For over two decades, Technico has been a leader in the motion control industry.

F-32. Compact Linear Actuators DRS2 Series. AZ Equipped. See Full Product Details Online

F- Compact Linear Actuators DRS Series Equipped $ $ For detailed information about regulations and standards, please see the Oriental Motor website. The DRS Series actuators use the Series equipped with

ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES ACTUATORS

ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES 1 ELECTRIC AXIS - RODLESS ELEKTRO SK SERIES Electric axis without screw piston rod, with V-Lock interface. The cylinder frame is made of anodized extruded

Crossed Roller Slides

Crossed Roller Slides ov-crossed-slides-divider - Updated - 18-09-2017 165 Linear Linear Rail Sets Overview Standard cross roller rail sets L1000 & L1001 Seven rail profiles (Sizes 1-12) Lengts: 20mm to

Heavy Duty Actuator Type HDS and HDB With Ball Screw or Belt Drive

Heavy Duty Actuator Type HDS and HDB With Ball Screw or Belt Drive Catalog No. 0001-A Introducing Bearing Engineers new line of Heavy Duty Actuators Type HDS & HDB Construction 1. Base: Anodized Aluminum

Bearings for Aircraft and Special Engineering

Bearings for Aircraft and Special Engineering Bearings for aircraft and special engineering A separate production group of bearings produced by KINEX, a. s., the plant Skalica is represented by bearings

Pos. Part No. Designation Quantity

Part No.: R902117059 Designation: AA4VG90HWDL1/32R-NSF52K021E-S R902005283 1 R902087364 ROTARY GROUP L 2 R902016006 CONTROL, HYDRAULIC L 3 R909608820 PORT PLATE WITH VALVES L 4 R902080109 PUMP SUPPORT

Roller Follower General Catalog

General Catalog A Product Descriptions Features and Types... A20-2 Features of the... A20-2 Structure and Features... A20-2 Types of the... A20-3 Types and Features... A20-4 Point of Selection... A20-6

highlights Double tube linear actuators

highlights GN 491 with right or left hand thread, single slider 3 Type R1 Right hand thread, single shaft end R2* Right hand thread, two shaft ends L1* Left hand thread, single shaft end L2* Left hand

POLY V TAPER-LOCK PULLEYS

POLY V TAPER-LOCK PULLEYS Types Grooved pulleys designed for industrial transmissions are identified by reference to the dimensions and the groove pitch in the following types: PPV-J PPV-L Profile dimensions

Introduction. Deep Groove Ball Bearings. Angular Contact Ball Bearings. 1

Introduction Deep Groove Ball Bearings At Axis, we build exceptionally close tolerances into our bearings. Instead of the usual ABEC 1, we manufacture every Axis bearing to meet or exceed ABEC 3 tolerances.

Sizes 32, 40, 50 and 63

> Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary

P2060 P2075 P2105 P2145 P3105 P3145

Technical Information Technical Features P2 Series Compact design Low noise level Service friendly Reliable Long-lasting Flexible Easy to install High self-priming speed Technical Data P3 Series P2 Series

Features. Specification. Model. Acting type. Tube I.D. (mm) Stroke (mm) 5, 10, 15 5, 10, 15, 20. Port size. Proof pressure.

MCGS series ø6, ø0 Features Multi-ports as standard enabling both direction mounting. Non-rotating accuracy ± 0. mbedding type sensors. The sensor cable will be in the same direction as the piping tube

Contents. Page. 1. Product description. 2. The AXC line of linear axes. 3. AXLT line of linear tables. AXC and AXS product overview...

SNR Industry Contents Page 3 1. Product description AXC and AXS product overview... 6-8 Dynamic load ratings of the linear motion systems... 9 Compact modules... 10-11 Linear tables... 12 Telescopic axes...

DB SERIES Belt Drive Actuators

DB SERIES Belt Drive Actuators High Speed Linear Actuators DB SERIES DB Series High Speed Long Travel Positive Belt Drive High Output Gearheads Steel or Plastic Bearings Custom Designs Del-Tron s belt-driven

SVR/SVS. Caged Ball LM Guide Ultra-heavy Load Type for Machine Tools Model SVR/SVS. Point of Selection. Point of Design. Options. Model No.

Caged Ball Guide Ultra-heavy Load Type for Machine Tools Model Protector 90 rail Ball cage Radial type model SVR Cross section 40 50 Ball * For the Ball Cage, see A. 4-Way Type Model SVS Cross section

Steering Performance Evaluation of Off Highway Vehicle Using Matlab Tools

Steering Performance Evaluation of Off Highway Vehicle Using Matlab Tools Presenters: Narasimha Kota Vikas Kshirsagar Overview of Presentation Introduction Different Steering Types Orbital Steering Mechanism

Linear Guides Pneumatic linear drive Series OSP - P Adaptive modular system The Ortman System Plus OSP provides a comprehensive range of linear guides

PNEUMATIC GROUP Guides ORTMAN SYSTEM PLUS LINEAR GUIDES FOR OSP-P 19 Linear Guides Pneumatic linear drive Series OSP - P Adaptive modular system The Ortman System Plus OSP provides a comprehensive range

INSOCOAT bearing designs INSOCOAT bearings with coated outer ring INSOCOAT bearings with coated inner ring

INSOCOAT bearings INSOCOAT bearing designs... 913 INSOCOAT bearings with coated outer ring... 913 INSOCOAT bearings with coated inner ring... 913 Other INSOCOAT bearings... 913 Bearing data general...

acme & ball screws actuators linear motion drive components engineering ingenuity

P R O D U C T O V E R V I E W acme & ball screws actuators linear motion drive components engineering ingenuity w w w. n o o k i n d u s t r i e s. c o m CC linear actuators CC Linear Actuators are ball

10 Thrust ball bearings

10 Thrust ball bearings Designs and variants.............. 1010 Single direction thrust ball bearings... 1010 Double direction thrust ball bearings.. 1010 Cages............................ 1010 Bearings

Interchangeability Versatility Durability Integration LINTRA PLUS ADVANTAGE

Interchangeability Versatility Durability Integration LINTRA PLUS ADVANTAGE 02 LINTRA PLUS LINTRA PLUS RELIABLE, DURABLE & PROVEN LINTRA Plus builds on the well-proven reputation of Norgren s existing

Integral tapered roller bearings Series JK0S

Integral tapered roller bearings Series JK0S Technical Product Information Features Features FAG integral tapered roller bearings JK0S are ready-to-fit, easily mounted units. The single row bearings are

LEG. Application example. Electrical 2-Finger Parallel Gripper Long-stroke Gripper. Gripping force 1050 N 1500 N. Weight 9 kg 11.

LEG www.comoso.com Size 760 Weight 9 kg 11.6 kg Gripping force 1050 N 1500 N Stroke per finger 281 mm Workpiece weight 15.75 kg 22.5 kg Application example Gripping unit for top loading and palettizing

15E INSOCOAT bearings

15E INSOCOAT bearings Designs and variants............... 1206 INSOCOAT bearings with a coated outer ring......................... 1207 INSOCOAT bearings with a coated inner ring.........................

High End Technology. Tight Shutoff. Reliability. Expertise you can trust. General Products

High End Technology Tight Shutoff Reliability Expertise you can trust General Products 210 Who are we? 248 MASCOT is a culmination of over one hundred years experience in the process control valve industry

Compact. Fast. Productive. DRL Lift/Swivel Unit

DRL Compact. Fast. Productive. DRL Lift/Swivel Unit Compact lift/swivel unit consisting of a strong short-stroke cylinder and a rack pinion swivel drive. Field of Application For use in clean and slightly

Rexroth. Spare parts list. Bosch Group. Part No.: R Designation: A4VG28HW1/30R-PZC10N001E-S

: R909442713 : A4VG28HW1/30R-PZC10N001E-S *G* R909709194 1 R909434314 ROTARY GROUP L 2 R909600897 CONTROL, HYDRAULIC L 3 R909428735 PORT PLATE WITH VALVES L 6 R909600949 CONTROL MODULE L 8 R909426341 HOUSING

Design V260 Ball Control Valve

Product Bulletin D102352X012 V260 Valve Design V260 Ball Control Valve The Design V260 is a full bore control valve designed from the ground up with features for optimized pressure, flow and process control.

Linear Bushings and Shafts

Linear Bushings and Shafts 45 b 1cr RA 83 100.1 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum Runner

Mechanical Series. Bearing Maintenance CEUs. Industrial Pneumatic Fundamentals CEUs. Industrial Hydraulic Fundamentals - 0.

Mechanical Series All industrial facilities use mechanical equipment in one form or another. Although the types of mechanical equipment can run the gamut from simple open/close valves to ultra complex

TS / CT TS / CT Ⅱ 195 Ⅱ 196

19 196 Precision Positioning Table Ball screw TS Slide table Ball screw Linear Points Crossed Roller Way 1 High precision and compact positioning table slide tables and beds. High precision and compact

Fisher V260 Ball Control Valve

Fisher V260 Ball Control Valve The Fisher V260 is a full-bore control valve designed from the ground up with features for optimized pressure, flow and process control. An integral drilled attenuator controls

ACTUATOR ASSEMBLY EXPLODED VIEW - ALL SERIAL NUMBERS

Distributed by Ergonomic Partners sales@ergonomicpartners.com 314-884-8884 www.ergonomicpartners.com ACTUATOR ASSEMBLY EXPLODED VIEW - ALL SERIAL NUMBERS 1 UNI-B8001677 RIGHT LINKAGE ASSEMBLY 1 2 UNI-B8001678

Linear Systems Solutions Defining the Future with the Schaeffler Group

Linear Systems Solutions Defining the Future with the Schaeffler Group LINEAR ACTUATORS Linear Solutions Provider Part retrieval systems, palletizers, custom tool changers, and dispensing robots are a

Transmission, disassembling and assembling

Page 1 of 27 34-43 Transmission, disassembling and assembling Disassembly sequence Page 34-55. Transmission overview 1-1st gear 2-2nd gear 3-3rd gear 4-4th gear 5-5th gear 6 - Reverse gear Removing and

Any reproduction, even partial, is allowed only by written permission by Rollco.

EASYSLIDE Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to make changes